• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 3183 : 201

NA
NA

Status of Standard is Unknown

PRACTICE FOR RUBBER - PREPARATION OF PIECES FOR TEST PURPOSES FROM PRODUCTS
Published date

01-01-2015

CONTAINED IN VOL. 09.01, 2016 Defines methods for the preparation of pieces of a rubber vulcanizate that is not in the form of sheet.

Committee
D 11
DevelopmentNote
Supersedes ASTM D 15. (02/2002)
DocumentType
Standard
PublisherName
American Society for Testing and Materials
Status
NA
SupersededBy
Supersedes

DWA-M 143-20:2018 TEST METHOD FOR DROP IMPACT RESISTANCE OF BLOW-MOLDED THERMOPLASTIC CONTAINERS
MIL PRF 11891 : F TRACK SHOE SETS, TRACK SHOE ASSEMBLIES, TRACK SHOE PADS AND TRACK SHOE BUSHINGS, VEHICULAR - ELASTOMERIZED
ASTM D 6284 : 2017 : REDLINE Standard Test Method for Rubber Property—Effect of Aqueous Solutions with Available Chlorine and Chloramine
MIL-DTL-11891 Revision G:1998 TRACK SHOE SETS, TRACK SHOE ASSEMBLIES, TRACK SHOE PADS AND TRACK SHOE BUSHINGS, VEHICULAR: ELASTOMERIZED
ASTM D 2628 : 1991 : R2005 Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements
ASTM D 3032 : 2016 : REDLINE Standard Test Methods for Hookup Wire Insulation
ASTM D 624 : 2000 : EDT 1 Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
ASTM D 3832 : 1979 : R2011 Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems
AASHTO M 251 : 2006 SPECIFICATION FOR PLAIN AND LAMINATED ELASTOMERIC BRIDGE BEARINGS
ASTM D 1456 : 1986 : R2005 Standard Test Method for Rubber Property—Elongation at Specific Stress
IEEE DRAFT 1493 : D8 2006 EVALUATION OF SOLVENTS USED FOR CLEANING ELECTRICAL CABLES AND ACCESSORIES
ASTM D 454 : 2004 : R2010 Standard Test Method for Rubber Deterioration by Heat and Air Pressure
ASTM D 2628 : 1991 : R2016 Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements
ASTM D 3052 : 1987 : R1996 Standard Practice for Rating Water-Emulsion Floor Polishes
ASTM D 624 : 2000 Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
ASTM D 3089 : 1997 : R2008 Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes
ASTM D 750 : 2012 Standard Practice for Rubber Deterioration Using Artificial Weathering Apparatus
ASTM D 413 : 1998 Standard Test Methods for Rubber Property-Adhesion to Flexible Substrate
ASTM E 1612 : 1994 : R2000 Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures
ASTM D 380 : 1994 : R2012 Standard Test Methods for Rubber Hose
ASTM E 1612 : 1994 : R2005 Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures
ASTM D 380 : 1994 : R2006 Standard Test Methods for Rubber Hose
ASTM D 2000 : 2012 Standard Classification System for Rubber Products in Automotive Applications
ASTM F 1909 : 1998 : R2004 Specification for Preformed Open-Cell Sponge Rubber Pail and Drum Gaskets
ASTM D 378 : 2010 : R2016 Standard Test Methods for Rubber (Elastomeric) Conveyor Belting, Flat Type
ASTM E 1783 : 1996 : R2005 Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures
ASTM D 3903 : 2015 : REDLINE Standard Specification for Rubber Seals Used in Air-Heat Transport of Solar Energy Systems
ASTM D 3832 : 1979 : R2006 Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems
MIL T 11891 : E TRACK SHOE ASSEMBLY, TRACK SHOE SETS, TRACK SHOE PADS, & TRACK SHOE BUSHINGS, VEHICULAR, ELASTOMERIZED
SAE J 18 : 2002 SPONGE AND EXPANDED CELLULAR RUBBER PRODUCTS
ASTM D 430 : 2006 : EDT 1 Standard Test Methods for Rubber Deterioration-Dynamic Fatigue
ASTM E 1783 : 1996 : R2000 Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures
MIL B 17901 : B BEARING COMPONENTS, BONDED SYNTHETIC RUBBER, WATER LUBRICATED
ASTM D 4014 : 2003 : R2007 Standard Specification for Plain and Steel-Laminated Elastomeric Bearings for Bridges
ASTM D 1052 : 2009 Standard Test Method for Measuring Rubber Deterioration-Cut Growth Using Ross Flexing Apparatus
ASTM D 624 : 2000 : R2007 Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
I.S. EN ISO 10414-2:2011 PETROLEUM AND NATURAL GAS INDUSTRIES - FIELD TESTING OF DRILLING FLUIDS - PART 2: OIL-BASED FLUIDS
CGSB-21.4 : 1993 LITHOGRAPHIC BLANKET AND ROLLER WASH SOLVENT
ASTM D 573 : 2004 Standard Test Method for Rubber—Deterioration in an Air Oven
ASTM D 1456 : 1986 : R2014 Standard Test Method for Rubber Property—Elongation at Specific Stress
ASTM D 575 : 1991 : R2001 Standard Test Methods for Rubber Properties in Compression
ASTM D 6515 : 2000 : R2009 Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
ASTM E 1612/E1612M : 1994 : R2017 Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures
ASTM D 3004 : 2008 Standard Specification for Crosslinked and Thermoplastic Extruded Semi-Conducting, Conductor and Insulation Shielding Materials
ASTM C 1187 : 2015 : REDLINE Standard Guide for Establishing Surveillance Test Program for Boron-Based Neutron Absorbing Material Systems for Use in Nuclear Fuel Storage Racks In a Pool Environment
ASTM D 575 : 1991 : R1996 Standard Test Methods for Rubber Properties in Compression
ASTM D 3767 : 2003 : R2014 Standard Practice for Rubber—Measurement of Dimensions
ASTM D 430 : 2006 : R2012 Standard Test Methods for Rubber Deterioration—Dynamic Fatigue
ASTM D 3767 : 2003 : R2008 Standard Practice for Rubber<span class='unicode'>—</span>Measurement of Dimensions
UL 92 : 1993 FIRE EXTINGUISHER AND BOOSTER HOSE
ASTM D 1460 : 1986 : R2001 Standard Test Method for Rubber Property—Change in Length During Liquid Immersion
ASTM F 1909 : 1998 : R2012 Standard Specification for Preformed Open–Cell Sponge Rubber Pail and Drum Gaskets
SAE J 2979 : 2012 TEST METHOD FOR VULCANIZED RUBBER AND THERMOPLASTIC ELASTOMER DETERMINATION OF COMPRESSIVE STRESS RELAXATION (CSR) RESPONSE
NFPA 1963 : 2014 FIRE HOSE CONNECTIONS
ASTM D 6515 : 2000 : R2016 Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
MIL-DTL-3100 Revision H:1998 WHEEL ASSEMBLIES, SOLID ELASTOMER TIRED; FOR TRACK LAYING VEHICLES
UNI EN ISO 10414-2 : 2011 PETROLEUM AND NATURAL GAS INDUSTRIES - FIELD TESTING OF DRILLING FLUIDS - PART 2: OIL-BASED FLUIDS
ASTM D 3038 : 1993 : R1999 Standard Test Method for Drop Shatter Test for Coke
ASTM D 413 : 1998 : R2017 Standard Test Methods for Rubber Property—Adhesion to Flexible Substrate
NACE TM 02 97 : 2017 EFFECTS OF HIGH-TEMPERATURE, HIGH-PRESSURE CARBON DIOXIDE DECOMPRESSION ON ELASTOMERIC MATERIALS
ASTM D 2632 : 2015 : REDLINE Standard Test Method for Rubber Property—Resilience by Vertical Rebound
ASTM D 3045 : 1992 : R1997 Standard Practice for Heat Aging of Plastics Without Load
ASTM D 3038 : 1993 : R2010 Standard Test Method for Drop Shatter Test for Coke
SAE J 200 : 2015 CLASSIFICATION SYSTEM FOR RUBBER MATERIALS
ASTM D 413 : 1998 : R2007 Standard Test Methods for Rubber Property<span class='unicode'>—</span>Adhesion to Flexible Substrate
ASTM D 378 : 2010 Standard Test Methods for Rubber (Elastomeric) Conveyor Belting, Flat Type
ASTM D 1456 : 1986 : R2001 Standard Test Method for Rubber Property—Elongation at Specific Stress
ASTM D 1330 : 2004 : R2015 : EDT 1 Standard Specification for Rubber Sheet Gaskets
ASTM F 1909 : 1998 Specification for Preformed Open-Cell Sponge Rubber Pail and Drum Gaskets
ASTM D 7121 : 2005 Standard Test Method for Rubber Property-Resilience Using Schob Type Rebound Pendulum
ASTM D 865 : 2011 Standard Test Method for Rubber<char: emdash>Deterioration by Heating in Air (Test Tube Enclosure)
ASTM D 572 : 2004 : R2015 Standard Test Method for Rubber—Deterioration by Heat and Oxygen
ASTM D 750 : 2012 : R2017 Standard Practice for Rubber Deterioration Using Artificial Weathering Apparatus
ASTM E 1783 : 1996 : R2009 Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures
ASTM D 3004 : 2008 : R2013 Standard Specification for Crosslinked and Thermoplastic Extruded Semi-Conducting, Conductor and Insulation Shielding Materials
ASTM D 575 : 1991 : R2007 Standard Test Methods for Rubber Properties in Compression
ASTM G 74 : 2013 : REDLINE Standard Test Method for Ignition Sensitivity of Nonmetallic Materials and Components by Gaseous Fluid Impact
ASTM D 413 : 1998 : R2002 : EDT 1 Standard Test Methods for Rubber Property—Adhesion to Flexible Substrate
ASTM D 380 : 1994 : R2000 Standard Test Methods for Rubber Hose
API RP 13B-2 : 2014 RECOMMENDED PRACTICE FOR FIELD TESTING OF OIL-BASED DRILLING FLUIDS
ASTM D 572 : 2004 : R2009 Standard Test Method for Rubber-Deterioration by Heat and Oxygen
ASTM D 572 : 2004 : R2010 Standard Test Method for Rubber-Deterioration by Heat and Oxygen
ASTM D 1330 : 2004 Standard Specification for Rubber Sheet Gaskets
MIL-DTL-22777 Revision G:1999 SOLES AND HEELS, RUBBER TRACTION TREAD FOR FOOTWEAR
ASTM D 573 : 2004 : R2015 Standard Test Method for Rubber—Deterioration in an Air Oven
MIL H 26521 : J HOSE ASSEMBLY, NONMETALLIC, FUEL, COLLAPSIBLE, LOW TEMPERATURE WITH NON-REUSABLE COUPLINGS
ASTM D 3832 : 1979 : R2001 Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems
ASTM D 3832 : 1979 : R1997 : EDT 1 Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems
ASTM D 573 : 2004 : R2010 Standard Test Method for Rubber—Deterioration in an Air Oven
ASTM D 2628 : 1991 : R2011 Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements
MIL PRF 3100 : F WHEEL ASSEMBLIES, SOLID ELASTOMER TIRED; FOR TRACK LAYING VEHICLES
ASTM D 1056 : 2014 : REDLINE Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber
ASTM D 454 : 2004 : R2015 Standard Test Method for Rubber Deterioration by Heat and Air Pressure
ASTM D 2628 : 1991 : R1998 Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements
ASTM D 7121 : 2005 : R2012 Standard Test Method for Rubber Property—Resilience Using Schob Type Rebound Pendulum
ASTM D 3771 : 2015 : REDLINE Standard Specification for Rubber Seals Used in Concentrating Solar Collectors
ASTM D 1460 : 1986 : R2005 Standard Test Method for Rubber Property—Change in Length During Liquid Immersion
ASTM D 1052 : 2009 : R2014 Standard Test Method for Measuring Rubber Deterioration—Cut Growth Using Ross Flexing Apparatus
ASTM D 430 : 2006 Standard Test Methods for Rubber Deterioration-Dynamic Fatigue
ASTM D 1460 : 1986 : R2014 Standard Test Method for Rubber Property—Change in Length During Liquid Immersion
ASTM D 624 : 2000 : R2012 Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
ASTM D 3491 : 1992 Standard Test Methods for Vulcanizable Rubber Tank and Pipe Lining (Withdrawn 1996)
ASTM D 3832 : 1979 : R2017 Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems
ASTM E 1783/E1783M : 1996 : R2017 Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures
ASTM D 6515 : 20001 Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
ISO 10414-2:2011 Petroleum and natural gas industries Field testing of drilling fluids Part 2: Oil-based fluids
EN ISO 10414-2:2011 Petroleum and natural gas industries - Field testing of drilling fluids - Part 2: Oil-based fluids (ISO 10414-2:2011)
MIL-DTL-17901 Revision C:2005 Bearing Components, Bonded Synthetic Rubber, Water Lubricated
MIL-R-3065 Revision E:1984 RUBBER, FABRICATED PRODUCT
ASTM D 4014 : 2003 : R2012 Standard Specification for Plain and Steel-Laminated Elastomeric Bearings for Bridges
HH-P-151 Revision F:1985 PACKING; RUBBER-SHEET, CLOTH-INSERT
BS EN ISO 10414-2:2011 Petroleum and natural gas industries. Field testing of drilling fluids Oil-based fluids
ASTM D 6515 : 2000 : R2010 Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
ASTM D 1460 : 1986 : R1997 : EDT 1 Standard Test Method for Rubber Property—Change in Length During Liquid Immersion
ASTM D 1330 : 2004 : R2010 Standard Specification for Rubber Sheet Gaskets
ASTM E 1612 : 1994 : R2009 Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures
ASTM D 3038 : 1993 : R2004 Standard Test Method for Drop Shatter Test for Coke
ASTM D 572 : 2004 Standard Test Method for Rubber-Deterioration by Heat and Oxygen
ASTM D 3767 : 2003 Standard Practice for Rubber-Measurement of Dimensions
MIL-DTL-26521 Revision L:2014 Hose Assembly, Nonmetallic, Fuel, Collapsible, Low Temperature with Non-Reusable Couplings
MIL-DTL-45301 Revision E:1998 TREAD ELASTOMER: SOLID TIRE, FOR TRACK LAYING VEHICLES
ASTM D 1460 : 1986 : R2010 Standard Test Method for Rubber Property—Change in Length During Liquid Immersion
ASTM D 575 : 1991 : R2012 Standard Test Methods for Rubber Properties in Compression
ASTM D 471 : 2016-02 TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS
IEEE 1493 : 2006 EVALUATION OF SOLVENTS USED FOR CLEANING ELECTRICAL CABLES AND ACCESSORIES
ASTM D 413 : 1998 : R2013 Standard Test Methods for Rubber Property—Adhesion to Flexible Substrate
ASTM D 4014 : 2003 Standard Specification for Plain and Steel-Laminated Elastomeric Bearings for Bridges
ASTM E 1612/E1612M : 1994 : R2013 : EDT 1 Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures
ASTM D 2000 : 2012 : R2017 Standard Classification System for Rubber Products in Automotive Applications
ASTM D 4289 : 2014-02 TEST METHOD FOR ELASTOMER COMPATIBILITY OF LUBRICATING GREASES AND FLUIDS
ASTM D 1456 : 1986 : R2010 Standard Test Method for Rubber Property—Elongation at Specific Stress
ASTM D 3667 : 2016 : REDLINE Standard Specification for Rubber Seals Used in Flat-Plate Solar Collectors
ASTM D 3056 : 2005 : R2010 Standard Test Method for Gel Time of Solventless Varnishes
ASTM E 1783/E1783M : 1996 : R2013 : EDT 1 Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures
ASTM D 454 : 2004 Standard Test Method for Rubber Deterioration by Heat and Air Pressure
ASTM D 6515 : 2000 : R2004 Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
ASTM D 4014 : 2003 : R2018 Standard Specification for Plain and Steel-Laminated Elastomeric Bearings for Bridges
ASTM D 925 : 2014 : REDLINE Standard Test Methods for Rubber Property—Staining of Surfaces (Contact, Migration, and Diffusion)
ASTM D 1456 : 1986 : R1996 Standard Test Method for Rubber Property—Elongation at Specific Stress

ASTM D 3182 : 2016 : REDLINE Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.