• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 3951 : 2010

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Practice for Commercial Packaging

Available format(s)

Hardcopy , PDF

Superseded date

11-11-2014

Language(s)

English

Published date

15-08-2010

1.1 This practice establishes minimum requirements for packaging of supplies and equipment, exclusive of ammunition, explosives, or hazardous materials, as covered in Title 49 of the Code of Federal Regulations.

1.2 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee
D 10
DocumentType
Standard Practice
Pages
3
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM D 5168 : 2012 : R2017 Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers
ASTM F 880 : 2012 : R2017 Standard Specification for Stainless Steel Socket, Square Head, and Slotted Headless-Set Screws
ASTM D 6123/D6123M : 1997 : R2012 Standard Specification for Pressure-Sensitive Tape for Light-Duty Packaging and General Purpose Masking
ASTM F 835 : 2018 Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws
ASTM F 3001 : 2014 Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) with Powder Bed Fusion
ASTM F 1203 : 2016 Standard Specification for Washing Machines—Pot, Pan, and Utensil, Heat Sanitizing, Commercial Rotary Conveyor Type
ASTM F 2798 : 2009 : R2018 Standard Specification for Sealless Lube Oil Pump with Oil Through Motor for Marine Applications
ASTM B 605 : 1995 : REV A : R2015 Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy
ASTM F 3056 : 2014 : EDT 1 Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion
ASTM F 952 : 2012 : R2017 Standard Specification for Mixing Machines, Food, Electric
ASTM F 2521 : 2009 : R2014 Standard Specification for Heavy-Duty Ranges, Gas and Electric
ASTM D 7932 : 2017 Standard Specification for Printed, Pressure-Sensitive Adhesive Labels for Use in Extreme Distribution Environments
ASTM F 2796 : 2019 Standard Specification for Hot Food Holding Tables
ASTM F 1966 : 2012 : R2017 : EDT 1 Standard Specification for Dough Divider and Rounding Machines
ASTM D 6573/D6573M : 2013 Standard Specification for General Purpose Wirebound Shipping Boxes
ASTM F 2045 : 2000 : R2018 : EDT 1 Standard Specification for Indicators, Sight, Liquid Level, Direct and Indirect Reading, Tubular Glass/Plastic
ASTM D 6256/D6256M : 2016 Standard Specification for Wood-Cleated Shipping Boxes with Skidded, Load-Bearing Bases
ASTM F 2044 : 2009 : R2019 : EDT 1 Standard Specification for Liquid Level Indicating Equipment, Electrical
ASTM F 2168 : 2013 Standard Specification for Packing Material, Graphitic, Corrugated Ribbon or Textured Tape, and Die-Formed Ring
ASTM F 879 : 2015 Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws
ASTM A 1016/A1016M : 2018 : REV A Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes
ASTM F 1963 : 2005 : R2017 : EDT 1 Standard Specification for Deep-Fat Fryers, Gas or Electric, Open
ASTM F 1603 : 2017 Standard Specification for Kettles, Steam-Jacketed, 32 oz to 20 gal (1 to 75.7 L), Tilting, Table Mounted, Direct Steam, Gas and Electric Heated
ASTM F 2800 : 2011 : R2017 Standard Specification for Recirculating Hood System for Cooking Appliances
ASTM B 403 : 2012 Standard Specification for Magnesium-Alloy Investment Castings
ASTM F 3184 : 2016 Standard Specification for Additive Manufacturing Stainless Steel Alloy (UNS S31603) with Powder Bed Fusion
ASTM F 3302 : 2018 Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Titanium Alloys via Powder Bed Fusion
ASTM F 2645 : 2016 Standard Specification for Bun Slicing Machines
ASTM F 1568 : 2012 : R2017 : EDT 1 Standard Specification for Food Processors, Electric
ASTM F 1047 : 2017 Standard Specification for Frying and Braising Pans, Tilting Type
ASTM D 6251/D6251M : 2011 Standard Specification for Wood-Cleated Panelboard Shipping Boxes
ASTM F 880M : 2016 Standard Specification for Stainless Steel Socket Set Screws (Metric) (Withdrawn 2023)
ASTM A 394 : 2008 : R2015 Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare
ASTM A 563M : 2007 : R2013 Standard Specification for Carbon and Alloy Steel Nuts (Metric) (Withdrawn 2021)
ASTM B 840 : 2015 Standard Specification for Electrodeposited Coatings of Zinc Cobalt Alloy Deposits
ASTM F 1347 : 1991 : R2018 Standard Specification for Manually Operated Fueling Hose Reels
ASTM B 361 : 2016 Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings
ASTM F 3055 : 2014 : REV A Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion
ASTM F 3255 : 2019 Standard Specification for Rapid Pull Down Refrigerators (Blast Chillers), Freezers (Blast Freezers), Combination Refrigerator/Freezer (Blast Chiller/Freezers), and Quick Chillers for Commercial Use
ASTM B 912 : 2002 : R2018 Standard Specification for Passivation of Stainless Steels Using Electropolishing
ASTM F 2071 : 2000 : R2017 Standard Specification for Switch, Position Proximity (Noncontact) or Limit (Mechanical Contact), Fiber-Optic
ASTM F 2281 : 2004 : R2017 Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications
ASTM F 1150 : 2016 Standard Specification for Commercial Food Waste Pulper and Waterpress Assembly
ASTM A 502 : 2003 : R2015 Standard Specification for Rivets, Steel, Structural
ASTM B 842 : 1999 : R2016 Standard Specification for Electrodeposited Coatings of Zinc Iron Alloy Deposits
ASTM F 836M : 2016 : EDT 1 Standard Specification for Style 1 Stainless Steel Metric Nuts (Metric)
ASTM F 1138 : 1998 : R2014 Standard Specification for Spray Shields for Mechanical Joints
ASTM F 593 : 2017 Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs
ASTM F 1495 : 2014 : REV A Standard Specification for Combination Oven Electric or Gas Fired
ASTM B 733 : 2015 Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal
ASTM F 2202 : 2002 : R2015 Standard Specification for Slow Cook/Hold Ovens and Hot Food Holding Cabinets
ASTM F 2070 : 2000 : R2017 Standard Specification for Transducers, Pressure and Differential, Pressure, Electrical and Fiber-Optic
ASTM D 5118/D5118M : 2015 Standard Practice for Fabrication of Fiberboard Shipping Boxes
ASTM F 1510 : 2007 : R2013 Standard Specification for Rotary Positive Displacement Pumps, Ships Use
ASTM B 984 : 2012 Standard Specification for Electrodeposited Coatings of Palladium- Cobalt Alloy for Engineering Use
ASTM F 1899 : 2014 : REV A Standard Specification for Food Waste Pulper Without Waterpress Assembly
ASTM F 2835 : 2010 : R2017 Standard Specification for Underfired Broilers
ASTM D 5998 : 2016 Standard Specification for Molded Polyethylene Shipping and Storage Drums
ASTM F 1085 : 2014 Standard Specification for Mattress and Box Springs for Use in Berths in Marine Vessels
ASTM D 6411/D6411M : 1999 : R2012 Standard Specification For Silicone Rubber Room Temperature Vulcanizing Low Outgassing Materials
ASTM F 2520 : 2005 : R2012 Standard Specification for Reach-in Refrigerators, Freezers, Combination Refrigerator/Freezers, and Thaw Cabinets
ASTM B 777 : 2015 Standard Specification for Tungsten Base, High-Density Metal
ASTM F 1217 : 2017 Standard Specification for Cooker, Steam
ASTM D 5749 : 2017 Standard Specification for Reinforced and Plain Gummed Tape for Sealing and Securing
ASTM F 2087 : 2013 : R2019 Standard Specification for Packing, Fiberglass, Braided, Rope, and Wick
ASTM B 900 : 2016 Standard Practice for Packaging of Copper and Copper Alloy Mill Products for U.S. Government Agencies
ASTM B 679 : 1998 : R2015 Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use
ASTM F 844 : 2007 : REV A : R2013 Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use
ASTM F 2215 : 2015 Standard Specification for Balls, Bearings, Ferrous and Nonferrous for Use in Bearings, Valves, and Bearing Applications
ASTM F 1021 : 2018 Standard Specification for Feeders, Detergent, Rinse Agent, and Sanitizing Agent for Commercial Dishwashing and Glasswashing Machines
ASTM D 6590/D6590M : 2000 : R2012 Standard Specification for Pressure-Sensitive Tape for Sealing Fiber Containers and Cans
ASTM F 1145 : 2005 : R2017 Standard Specification for Turnbuckles, Swaged, Welded, Forged
ASTM F 1604 : 2015 Standard Specification for Freezers, Ice Cream, Soft Serve, Shake
ASTM F 2092 : 2014 Standard Specification for Convection Oven Gas or Electric
ASTM F 2154 : 2013 : R2019 Standard Specification for Sound-Absorbing Board, Fibrous Glass, Perforated Fibrous Glass Cloth Faced
ASTM B 660 : 2015 Standard Practices for Packaging/Packing of Aluminum and Magnesium Products
ASTM D 5677 : 2017 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines
ASTM F 901 : 2001 : R2017 Standard Specification for Aluminum Transmission Tower Bolts and Nuts
ASTM F 2924 : 2014 Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion
ASTM A 563 : 2015 Standard Specification for Carbon and Alloy Steel Nuts
ASTM B 456 : 2017 Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus<brk/> Chromium and Nickel Plus Chromium
ASTM D 4649 : 2003 : R2016 Standard Guide for Selection and Use of Stretch Wrap Films
ASTM F 2646 : 2016 Standard Specification for Bread Slicing Machines
ASTM D 5363 : 2016 Standard Specification for Anaerobic Single-Component Adhesives (AN)
ASTM B 488 : 2018 Standard Specification for Electrodeposited Coatings of Gold for Engineering Uses
ASTM D 6788 : 2002 : R2017 Standard Specification for Repositionable Pressure-Sensitive Flags
ASTM F 468 : 2016 Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use
ASTM F 594 : 2009 : R2015 Standard Specification for Stainless Steel Nuts
ASTM F 1360 : 2017 Standard Specification for Ovens, Microwave, Electric
ASTM D 5330/D5330M : 2006 : R2012 : EDT 1 Standard Specification for Pressure-Sensitive Tape for Packaging, Filament-Reinforced
ASTM F 3213 : 2017 Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Cobalt-28 Chromium-6 Molybdenum via Powder Bed Fusion
ASTM D 3953 : 2015 Standard Specification for Strapping, Flat Steel and Seals
ASTM F 2891 : 2015 Standard Specification for Commercial Bulk Milk Dispensers, Mechanically Refrigerated
ASTM F 3318 : 2018 Standard for Additive Manufacturing – Finished Part Properties – Specification for AlSi10Mg with Powder Bed Fusion – Laser Beam
ASTM F 2988 : 2018 Standard Specification for Commercial Coffee Brewers
ASTM F 1114 : 2016 Standard Specification for Heat Sanitizing Commercial Pot, Pan, and Utensil Stationary Rack Type Water-Driven Rotary Spray
ASTM F 2511 : 2005 : R2013 Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid
ASTM A 450/A450M : 2018 : REV A Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes
ASTM F 837M : 2016 Standard Specification for Stainless Steel Socket Head Cap Screws [Metric]
ASTM F 919 : 2015 Standard Specification for Slicing Machines, Food, Electric
ASTM F 1718 : 2001 : R2019 Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps
ASTM F 918 : 2015 Standard Specification for Noncarbonated Mechanically Refrigerated Beverage Dispenser (Visible Product)
ASTM D 4727/D4727M : 2017 Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes
ASTM B 686/B686M : 2018 Standard Specification for Aluminum Alloy Castings, High-Strength
ASTM F 2046 : 2000 : R2017 Standard Specification for Tachometers, Various
ASTM F 2362 : 2003 : R2013 Standard Specification for Temperature Monitoring Equipment
ASTM A 1074 : 2011 : R2015 Standard Specification for Hot Tin and Hot Tin/Lead Dip on Ferrous and Non-Ferrous Metals
ASTM B 700 : 2008 : R2014 Standard Specification for Electrodeposited Coatings of Silver for Engineering Use
ASTM D 5486/D5486M : 2006 : R2012 Standard Specification for Pressure-Sensitive Tape for Packaging, Box Closure, and Sealing
ASTM E 921 : 1997 : R2016 Standard Specification for Export Packaged Laboratory Apparatus
ASTM F 2834 : 2010 : REV A : R2017 : EDT 1 Standard Specification for Induction Cooktops, Counter Top, Drop-in Mounted, or Floor Standing
ASTM B 545 : 2013 Standard Specification for Electrodeposited Coatings of Tin
ASTM F 879M : 2016 Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws (Metric) (Withdrawn 2023)
ASTM F 1602 : 2012 : R2017 Standard Specification for Kettles, Steam-Jacketed, 20 to 200 gal (75.7 to 757 L), Floor or Wall Mounted, Direct Steam, Gas and Electric Heated
ASTM D 6880/D6880M : 2011 Standard Specification for Wood Boxes
ASTM F 2191/F2191M : 2013 Standard Specification for Packing Material, Graphitic or Carbon Braided Yarn
ASTM F 1182 : 2007 : R2013 Standard Specification for Anodes, Sacrificial Zinc Alloy
ASTM F 1919 : 2014 Standard Specification for Griddles, Single-Sided and Double-Sided, Gas and Electric
ASTM F 917 : 2014 Standard Specification for Commercial Food Waste Disposers
ASTM F 1126 : 2012 : R2017 : EDT 1 Standard Specification for Food Cutters (Electric)
ASTM D 6787/D6787M : 2002 : R2017 Standard Specification for Repositionable Note Pad
ASTM D 6254/D6254M : 2013 Standard Specification for Wirebound Pallet-Type Wood Boxes
ASTM D 3950 : 2017 Standard Specification for Strapping, Nonmetallic (and Joining Methods)
ASTM D 6412/D6412M : 1999 : R2012 Standard Specification For Epoxy (Flexible) Adhesive For Bonding Metallic And Nonmetallic Materials
ASTM A 999/A999M : 2018 Standard Specification for General Requirements for Alloy and Stainless Steel Pipe
ASTM F 1202 : 2016 Standard Specification for Washing Machines, Heat Sanitizing, Commercial, Pot, Pan, and Utensil Vertically Oscillating Arm Type

View more information
£56.36
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.