• Shopping Cart
    There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 4052 : 1996

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter

Superseded date

11-11-2014

Published date

31-12-2010

Sorry this product is not available in your region.

Committee
D 02
DocumentType
Test Method
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy

1.1 This test method covers the determination of the density or relative density of petroleum distillates and viscous oils that can be handled in a normal fashion as liquids at test temperatures between 15 and 35°C. Its application is restricted to liquids with vapor pressures below 600 mm Hg (80 kPa) and viscosities below about 15000 cSt (mm 2/s) at the temperature of test.

1.2 This test method should not be applied to samples so dark in color that the absence of air bubbles in the sample cell cannot be established with certainty. For the determination of density in crude oil samples use Test Method D 5002.

1.3 The accepted units of measure for density are grams per millilitre or kilograms per cubic metre.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see 7.4, 7.5, and 9.1.

ASTM D 5580 : 2015 : R2020 Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, <emph type="ital"> p/m</emph>-Xylene, <emph type="ital">o</emph>-Xylene, C<inf>9</inf> and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography
ASTM D 5501 : 2020 Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20 % Ethanol by Gas Chromatography
ASTM D 7618 : 2013 : R2017 Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Aviation Spark-Ignition Engine Fuel
ASTM D 8029 : 2018 Standard Specification for Biodegradable, Low Aquatic Toxicity Hydraulic Fluids
ASTM D 740 : 2011 : R2019 Standard Specification for Methyl Ethyl Ketone<sup>,</sup>
ASTM D 3338/D3338M : 2020 : REV A Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D 5372 : 2020 Standard Guide for Evaluation of Hydrocarbon Heat Transfer Fluids
ASTM D 6158 : 2018 Standard Specification for Mineral Hydraulic Oils
ASTM D 4814 : 2021 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 6984 : 2018 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine
ASTM D 331 : 2011 : R2019 Standard Specification for 2-Ethoxyethanol<sup>,</sup>
ASTM D 1475 : 2013 : R2020 Standard Test Method for Density of Liquid Coatings, Inks, and Related Products
ASTM D 7826 : 2020 : REV A Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives
ASTM D 4669 : 2018 Standard Test Method for Polyurethane Raw Materials: Determination of Specific Gravity of Polyols
ASTM D 770 : 2011 : R2019 Standard Specification for Isopropyl Alcohol<sup>,</sup>
ASTM D 304 : 2011 : R2019 Standard Specification for <emph type="bdit">n</emph>-Butyl Alcohol (Butanol)
ASTM E 3237 : 2019 Standard Specification for Undenatured Ethanol from Biomass for Use in Industrial Applications
ASTM D 2880 : 2020 Standard Specification for Gas Turbine Fuel Oils
ASTM D 8046 : 2016 : REV A Standard Guide for Pumpability of Heat Transfer Fluids
ASTM D 4614 : 2011 : R2019 Standard Specification for Ethyl Acetate (All Grades)
ASTM D 7549 : 2019 Standard Test Method for Evaluation of Heavy-Duty Engine Oils under High Output Conditions—Caterpillar C13 Test Procedure
ASTM D 2892 : 2020 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D 8144 : 2018 : EDT 1 Standard Test Method for Separation and Determination of Aromatics, Nonaromatics, and FAME Fractions in Middle Distillates by Solid-Phase Extraction and Gas Chromatography
ASTM D 6379 : 2011 : R2019 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection
ASTM D 5599 : 2018 Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
ASTM D 8290 : 2020 Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Aviation Turbine Fuel using Mid-Infrared Laser Spectroscopy
ASTM D 2414 : 2019 Standard Test Method for Carbon Black—Oil Absorption Number (OAN)
ASTM D 6550 : 2020 Standard Test Method for Determination of Olefin Content of Gasolines by Supercritical-Fluid Chromatography
ASTM D 910 : 2020 : REV A Standard Specification for Leaded Aviation Gasolines
ASTM D 1655 : 2020 : REV D Standard Specification for Aviation Turbine Fuels
ASTM D 1719 : 2011 : R2019 Standard Specification for Isobutyl Alcohol<sup>,</sup>
ASTM D 8274 : 2020 : REV A Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil by Portable Rapid Mid-Infrared Analyzer
ASTM D 8226 : 2021 Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIF Spark Ignition Engine<rangeref></rangeref >
ASTM D 5769 : 2020 Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry
ASTM D 4054 : 2020 : REV C Standard Practice for Evaluation of New Aviation Turbine Fuels and Fuel Additives
ASTM D 1045 : 2019 Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics
ASTM D 7042 : 2021 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 1217 : 2020 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM D 8256 : 2020 Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in the Sequence VH Spark-Ignition Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D 8011 : 2019 Standard Specification for Natural Gasoline as a Blendstock in Ethanol Fuel Blends or as a Denaturant for Fuel Ethanol
ASTM D 8350 : 2020 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVB Spark-Ignition Engine
ASTM D 7468 : 2020 Standard Test Method for Cummins ISM Test
ASTM D 2225 : 2020 Standard Test Methods for Silicone Liquids Used for Electrical Insulation
ASTM D 4360 : 2011 : R2019 Standard Specification for Methyl <emph type="bdit">n</emph>-Amyl Ketone
ASTM D 5967 : 2019 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
ASTM D 8275 : 2021 Standard Specification for Gasoline-like Test Fuel for Compression-Ignition Engines
ASTM D 5453 : 2019 : REV A Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 8111 : 2020 : REV B Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIH, Spark-Ignition Engine
ASTM D 5002 : 2019 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
ASTM D 7320 : 2018 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIG, Spark-Ignition Engine
ASTM D 7318 : 2019 : EDT 1 Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration
ASTM D 7666 : 2012 : R2019 Standard Specification for Triglyceride Burner Fuel
ASTM D 7156 : 2019 Standard Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine
ASTM D 7777 : 2013 : R2018 : EDT 1 Standard Test Method for Density, Relative Density, or API Gravity of Liquid Petroleum by Portable Digital Density Meter
ASTM D 3130 : 2011 : R2019 Standard Specification for <emph type="bdit">n</emph>-Propyl Acetate (96 % Grade)
ASTM D 4815 : 2015 : REV B : R2019 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C<inf>1</inf> to C<inf>4</inf> Alcohols in Gasoline by Gas Chromatography
ASTM D 7620 : 2010 : R2020 Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection
ASTM D 5986 : 1996 : R2019 Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C<inf>8</inf >–C<inf>12</inf> Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform Infrared Spectroscopy
ASTM D 7058 : 2019 Standard Test Method for Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer
ASTM D 1007 : 2011 : R2019 Standard Specification for <emph type="bdit">sec</emph>-Butyl Alcohol<sup>,</sup>
ASTM D 8048 : 2021 Standard Test Method for Evaluation of Diesel Engine Oils in T-13 Diesel Engine
ASTM D 4659 : 2019 Standard Test Methods for Polyurethane Raw Materials: Determination of Specific Gravity of Isocyanates
ASTM D 6615 : 2015 : REV A : R2019 Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel
ASTM D 7484 : 2021 Standard Test Method for Evaluation of Automotive Engine Oils for Valve-Train Wear Performance in Cummins ISB Medium-Duty Diesel Engine
ASTM D 7951 : 2020 Standard Specification for Disproportionation (TDP) Toluene
ASTM D 7422 : 2019 Standard Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine
ASTM D 7806 : 2020 Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Ester) and Triglyceride Content in Diesel Fuel Oil Using Mid-Infrared Spectroscopy (FTIR Transmission Method)
ASTM D 3622 : 2011 : R2019 Standard Specification for 1-Propanol (<emph type="bdit">n</emph>-Propyl Alcohol)
ASTM D 7566 : 2020 : REV C Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
ASTM D 6296 : 1998 : R2017 Standard Test Method for Total Olefins in Spark-ignition Engine Fuels by Multidimensional Gas Chromatography
ASTM D 4806 : 2020 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM F 2084/F2084M : 2001 : R2018 Standard Guide for Collecting Containment Boom Performance Data in Controlled Environments
ASTM D 8114 : 2021 Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIE Spark Ignition
ASTM D 4652 : 2020 Standard Specification for Silicone Liquid Used for Electrical Insulation
ASTM D 8074 : 2019 Standard Test Method for Evaluation of Diesel Engine Oils in DD13 Diesel Engine
ASTM D 396 : 2020 Standard Specification for Fuel Oils
ASTM D 6277 : 2007 : R2017 Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
ASTM E 202 : 2018 Standard Test Methods for Analysis of Ethylene Glycols and Propylene Glycols
ASTM D 3505 : 2018 Standard Test Method for Density or Relative Density of Pure Liquid Chemicals (Withdrawn 2023)
ASTM D 7963 : 2019 : EDT 1 Standard Test Method for Determination of Contamination Level of Fatty Acid Methyl Esters in Middle Distillate and Residual Fuels Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method
ASTM D 7875 : 2020 Standard Test Method for Determination of Butanol and Acetone Content of Butanol for Blending with Gasoline by Gas Chromatography
ASTM D 8183 : 2018 Standard Test Method for Determination of Indicated Cetane Number (ICN) of Diesel Fuel Oils using a Constant Volume Combustion Chamber—Reference Fuels Calibration Method
ASTM D 5194 : 2018 Standard Test Method for Trace Chloride in Liquid Aromatic Hydrocarbons
ASTM D 1153 : 2012 Standard Specification for Methyl Isobutyl Ketone (Withdrawn 2021)
ASTM D 4895 : 2018 Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion
ASTM D 8150 : 2017 Standard Test Method for Determination of Organic Chloride Content in Crude Oil by Distillation Followed by Detection Using Combustion Ion Chromatography
ASTM D 330 : 2007 : R2013 Standard Specification for 2-Butoxyethanol
ASTM D 5845 : 2001 : R2016 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and <emph type="ital">tert</emph>-Butanol in Gasoline by Infrared Spectroscopy
ASTM D 1969 : 2007 : R2012 Standard Specification for 2-Ethylhexanol (Withdrawn 2021)
ASTM D 2634 : 2007 : R2013 Standard Specification for Methyl Amyl Acetate (95 % Grade)
ASTM D 976 : 2006 : R2016 Standard Test Method for Calculated Cetane Index of Distillate Fuels
ASTM D 5964 : 2016 Standard Practice for Rubber IRM 901, IRM 902, and IRM 903 Replacement Oils for ASTM No. 1, ASTM No. 2, ASTM No. 3 Oils, and IRM 905 formerly ASTM No. 5 Oil
ASTM D 3238 : 2017 : REV A Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method
ASTM D 4815 : 2015 : REV B Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C<inf>1</inf> to C<inf>4</inf> Alcohols in Gasoline by Gas Chromatography
ASTM D 1655 : 2019 Standard Specification for Aviation Turbine Fuels
ASTM D 2892 : 2018 : REV A Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D 608 : 2005 : R2019 Standard Specification for Dibutyl Phthalate
ASTM D 1405/D1405M : 2008 : R2013 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels (Withdrawn 2019)
ASTM D 4836 : 2009 : R2017 Standard Specification for Dipropylene Glycol Monomethyl Ether
ASTM D 5769 : 2015 Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry
ASTM D 7797 : 2018 Standard Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method
ASTM D 3735 : 2007 : R2012 Standard Specification for VM&P Naphthas (Withdrawn 2021)
ASTM D 6923 : 2018 Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1R Test Procedure
ASTM D 7826 : 2019 Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives
ASTM D 8074 : 2018 Standard Test Method for Evaluation of Diesel Engine Oils in DD13 Diesel Engine
ASTM D 7156 : 2017 Standard Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine
ASTM D 7665 : 2017 Standard Guide for Evaluation of Biodegradable Heat Transfer Fluids
ASTM D 3120 : 2008 : R2019 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 3540 : 2012 Standard Specification for Primary Amyl Acetate, Synthetic (98 % Grade) (Withdrawn 2021)
ASTM D 7371 : 2014 Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)
ASTM D 7862 : 2019 Standard Specification for Butanol for Blending with Gasoline for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 7666 : 2012 Standard Specification for Triglyceride Burner Fuel
ASTM D 4857 : 2012 Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards (Withdrawn 2021)
ASTM D 2635 : 2007 : R2012 Standard Specification for Methyl Isobutyl Carbinol (Withdrawn 2021)
ASTM D 8256 : 2019 Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in the Sequence VH Spark-Ignition Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM D 5164 : 2005 : R2019 Standard Specification for Propylene Glycol and Dipropylene Glycol
ASTM D 1217 : 2015 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM D 7544 : 2012 : R2017 Standard Specification for Pyrolysis Liquid Biofuel
ASTM D 6615 : 2015 : REV A Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel
ASTM D 6987/D6987M : 2013 : REV A Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine (Withdrawn 2022)
ASTM D 8147 : 2017 Standard Specification for Special-Purpose Test Fuels for Aviation Compression-Ignition Engines
ASTM D 7875 : 2014 Standard Test Method for Determination of Butanol and Acetone Content of Butanol for Blending with Gasoline by Gas Chromatography
ASTM D 8111 : 2019 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIH, Spark-Ignition Engine
ASTM D 1492 : 2013 Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Coulometric Titration
ASTM D 2140 : 2008 : R2017 Standard Practice for Calculating Carbon-Type Composition of Insulating Oils of Petroleum Origin
ASTM D 6710 : 2017 Standard Guide for Evaluation of Hydrocarbon-Based Quench Oil
ASTM D 2627 : 2008 : R2012 Standard Specification for Diacetone Alcohol (Withdrawn 2021)
ASTM D 2694 : 2005 : R2019 Standard Specification for Diethylene Glycol<sup>,</sup>
ASTM D 2916 : 2009 : R2017 Standard Specification for Isophorone
ASTM D 7328 : 2017 Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection
ASTM D 1045 : 2014 Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics
ASTM D 2225 : 2004 : R2012 Standard Test Methods for Silicone Fluids Used for Electrical Insulation
ASTM D 5372 : 2017 Standard Guide for Evaluation of Hydrocarbon Heat Transfer Fluids
ASTM D 7863 : 2017 Standard Guide for Evaluation of Convective Heat Transfer Coefficient of Liquids
ASTM D 1555 : 2016 Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane
ASTM D 2917 : 2007 : R2013 Standard Specification for Methyl Isoamyl Ketone
ASTM D 6618 : 2016 Standard Test Method for Evaluation of Engine Oils in Diesel Four-Stroke Cycle Supercharged 1M-PC Single Cylinder Oil Test Engine
ASTM D 2414 : 2018 : REV A Standard Test Method for Carbon Black—Oil Absorption Number (OAN)
ASTM E 1177 : 2014 Standard Specification for Engine Coolant Grade Glycol
ASTM D 4868 : 2017 Standard Test Method for Estimation of Net and Gross Heat of Combustion of Hydrocarbon Burner and Diesel Fuels
ASTM D 7640 : 2016 Standard Specification for Engine Coolant Grade Glycerin
ASTM D 7044 : 2015 Standard Specification for Biodegradable Fire Resistant Hydraulic Fluids (Withdrawn 2024)
ASTM D 4529 : 2017 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D 7583 : 2016 Standard Test Method for John Deere Coolant Cavitation Test
ASTM D 7041 : 2016 Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbons and Hydrocarbon-Oxygenate Blends by Gas Chromatography with Flame Photometric Detection
ASTM D 7620 : 2010 : R2015 Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection
ASTM D 7042 : 2016 : EDT 3 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 6448 : 2016 Standard Specification for Industrial Burner Fuels from Used Lubricating Oils
ASTM D 7223 : 2017 Standard Specification for Aviation Certification Turbine Fuel
ASTM D 6756 : 2017 Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer
ASTM D 4629 : 2017 Standard Test Method for Trace Nitrogen in Liquid Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection
ASTM D 6681 : 2017 Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1P Test Procedure
ASTM D 8048 : 2019 Standard Test Method for Evaluation of Diesel Engine Oils in T-13 Diesel Engine
ASTM D 3487 : 2016 : EDT 1 Standard Specification for Mineral Insulating Oil Used in Electrical Apparatus
ASTM D 2501 : 2014 : R2019 Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils
ASTM D 7961 : 2017 Standard Practice for Calibrating U-tube Density Cells over Large Ranges of Temperature and Pressure
ASTM D 396 : 2019 Standard Specification for Fuel Oils
ASTM D 8047 : 2018 Standard Test Method for Evaluation of Engine Oil Aeration Resistance in a Caterpillar C13 Direct-Injected Turbocharged Automotive Diesel Engine
ASTM D 910 : 2017 : REV A Standard Specification for Leaded Aviation Gasolines
ASTM D 1555M : 2016 Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric]
ASTM D 2636 : 2007 : R2012 Standard Specification for Hexylene Glycol (Withdrawn 2021)
ASTM D 4652 : 2005 : R2012 Standard Specification for Silicone Fluid Used for Electrical Insulation
ASTM D 3131 : 2007 : R2013 Standard Specification for Isopropyl Acetate (99 % Grade)
ASTM E 1119 : 2009 : R2015 : EDT 1 Standard Specification for Industrial Grade Ethylene Glycol
ASTM D 7861 : 2014 : R2019 Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Diesel Fuel by Linear Variable Filter (LVF) Array Based Mid-Infrared Spectroscopy
ASTM D 5222 : 2016 Standard Specification for High Fire-Point Mineral Electrical Insulating Oils
ASTM D 4304 : 2017 Standard Specification for Mineral and Synthetic Lubricating Oil Used in Steam or Gas Turbines
ASTM D 329 : 2007 : R2013 Standard Specification for Acetone
ASTM D 7422 : 2017 : REV A Standard Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine
ASTM D 7347 : 2015 Standard Test Method for Determination of Olefin Content in Denatured Ethanol by Supercritical Fluid Chromatography (Withdrawn 2024)
ASTM D 5501 : 2012 : R2016 Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20% Ethanol by Gas Chromatography
ASTM D 4054 : 2019 Standard Practice for Evaluation of New Aviation Turbine Fuels and Fuel Additives
ASTM D 6550 : 2015 Standard Test Method for Determination of Olefin Content of Gasolines by Supercritical-Fluid Chromatography
ASTM D 5967 : 2017 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
ASTM D 7319 : 2017 Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography
ASTM D 3734 : 2005 : R2018 Standard Specification for High-Flash Aromatic Naphthas
ASTM D 3128 : 2007 : R2013 Standard Specification for 2-Methoxyethanol
ASTM D 1480 : 2015 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM D 1160 : 2018 Standard Test Method for Distillation of Petroleum Products at Reduced Pressure
ASTM D 5137 : 2007 : R2013 Standard Specification for Hexyl Acetate
ASTM D 7589 : 2016 Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VID Spark Ignition Engine<rangeref></rangeref >
ASTM D 4814 : 2019 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 5622 : 2017 Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis
ASTM D 7576 : 2016 Standard Test Method for Determination of Benzene and Total Aromatics in Denatured Fuel Ethanol by Gas Chromatography (Withdrawn 2022)
ASTM D 1481 : 2017 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer (Withdrawn 2023)
ASTM D 1718 : 2009 : R2017 Standard Specification for Isobutyl Acetate (95 % Grade)
ASTM D 6227 : 2018 Standard Specification for Unleaded Aviation Gasoline Containing a Non-hydrocarbon Component
ASTM D 6560 : 2017 Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products
ASTM D 6894 : 2013 Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine (Withdrawn 2022)
ASTM D 4737 : 2010 : R2016 Standard Test Method for Calculated Cetane Index by Four Variable Equation
ASTM D 4171 : 2016 : REV A Standard Specification for Fuel System Icing Inhibitors
ASTM D 7388 : 2018 Standard Specification for Engine Coolant Grade 1,3-Propanediol (PDO)
ASTM D 7547 : 2018 : REV A Standard Specification for Hydrocarbon Unleaded Aviation Gasoline
ASTM D 3227 : 2016 Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)
ASTM D 5986 : 1996 : R2015 Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C<inf>8</inf >–C<inf> 12</inf> Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform Infrared Spectroscopy
ASTM D 7951 : 2018 Standard Specification for Disproportionation (TDP) Toluene
ASTM D 2190 : 2007 : R2013 Standard Specification for Vinyl Acetate
ASTM D 6304 : 2016 : EDT 1 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
ASTM D 7713 : 2018 Standard Specification for Aqueous Engine Coolant Grade Glycol (53 % by Volume Nominal)
ASTM D 4806 : 2019 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 7566 : 2019 Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
ASTM D 483 : 2004 : R2018 Standard Test Method for Unsulfonated Residue of Petroleum Plant Spray Oils (Withdrawn 2024)
ASTM D 6224 : 2016 Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment
ASTM D 117 : 2018 Standard Guide for Sampling, Test Methods, and Specifications for Electrical Insulating Liquids
ASTM D 1475 : 2013 Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
ASTM D 2693 : 2007 : R2012 Standard Specification for Ethylene Glycol (Withdrawn 2021)
ASTM D 7318 : 2019 Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration
ASTM D 6823 : 2008 : R2013 Standard Specification for Commercial Boiler Fuels With Used Lubricating Oils
ASTM D 7457 : 2012 Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry (Withdrawn 2019)
ASTM D 5917 : 2015 : R2019 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration
ASTM D 6709 : 2015 : REV A Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence VIII Spark-Ignition Engine (CLR Oil Test Engine)
ASTM D 5966 : 2013 Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine (Withdrawn 2022)
ASTM D 3338/D3338M : 2009 : R2014 : EDT 2 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D 6074 : 2015 Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils
ASTM D 7719 : 2018 Standard Specification for High Aromatic Content Unleaded Hydrocarbon Aviation Gasoline
ASTM D 5580 : 2015 Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, <emph type="ital"> p/m</emph>-Xylene, <emph type="ital">o</emph>-Xylene, C<inf>9</inf> and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography
ASTM D 7806 : 2012 Standard Test Method for Determination of the Fatty Acid Methyl Ester (FAME) Content of a Blend of Biodiesel and Petroleum-Based Diesel Fuel Oil Using Mid-Infrared Spectroscopy
ASTM D 4837 : 2007 : R2012 Standard Specification for Propylene Glycol Monomethyl Ether (Withdrawn 2021)
ASTM E 2470 : 2009 : R2015 : EDT 1 Standard Specification for Polyester Grade Ethylene Glycol
ASTM D 7960 : 2018 Standard Specification for Unleaded Aviation Gasoline Test Fuel Containing Non-hydrocarbon Components
ASTM D 891 : 2018 Standard Test Methods for Specific Gravity, Apparent, of Liquid Industrial Chemicals
ASTM D 4615 : 2012 Standard Specification for n-Butyl Acetate (All Grades) (Withdrawn 2021)

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.