ASTM D 4439 : 2017-08
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
TERMINOLOGY FOR GEOSYNTHETICS
Published date
01-08-2017
Superseded date
29-01-2020
Sorry this product is not available in your region.
CONTAINED IN VOL. 04.13, 2018 Specifies Terminology for Geosynthetics.
| Committee |
D 35
|
| DocumentType |
Redline
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| ASTM D 6706 : 2001 : R2013 | Standard Test Method for Measuring Geosynthetic Pullout Resistance in Soil |
| ASTM D 6768/D6768M : 2004 : R2015 : EDT 2 | Standard Test Method for Tensile Strength of Geosynthetic Clay Liners |
| ASTM D 6389 : 2017 : REDLINE | Standard Practice for Tests to Evaluate the Chemical Resistance of Geotextiles to Liquids |
| ASTM D 8173 : 2018 | Standard Guide for Site Preparation, Layout, Installation, and Hydration of Geosynthetic Cementitious Composite Mats |
| ASTM D 7864/D7864M : 2015 | Standard Test Method for Determining the Aperture Stability Modulus of Geogrids |
| ASTM D 7272 : 2006 : R2018 | Standard Test Method for Determining the Integrity of Seams Used in Joining Geomembranes by Premanufactured Taped Methods |
| ASTM D 6574 : 2000 | Test Method for Determining the (In-Plane) Hydraulic Transmissivity of a Geosynthetic by Radial Flow |
| ASTM D 6707 : 2006 : R2011 | Standard Specification for Circular-Knit Geotextile for Use in Subsurface Drainage Applications |
| ASTM D 6574 : 2000 : R2011 | Standard Test Method for Determining the (In-Plane) Hydraulic Transmissivity of a Geosynthetic by Radial Flow |
| ASTM D 6364 : 2006 | Standard Test Method for Determining Short-Term Compression Behavior of Geosynthetics |
| ASTM D 5617 : 2004 : R2015 | Standard Test Method for Multi-Axial Tension Test for Geosynthetics |
| ASTM D 7700 : 2015 : REDLINE | Standard Guide for Selecting Test Methods for Geomembrane Seams |
| ASTM D 7498 : 2009 | Standard Test Method for Vertical Strip Drains Using a Large Scale Consolidation Test |
| ASTM D 7003/D7003M : 2003 : R2013 : EDT 1 | Standard Test Method for Strip Tensile Properties of Reinforced Geomembranes |
| ASTM D 6636 : 2001 : R2006 | Standard Test Method for Determination of Ply Adhesion Strength of Reinforced Geomembranes |
| ASTM D 5493 : 2006 : R2016 | Standard Test Method for Permittivity of Geotextiles Under Load |
| ASTM D 7180/D7180M : 2005 : R2013 : EDT 1 | Standard Guide for Use of Expanded Polystyrene (EPS) Geofoam in Geotechnical Projects |
| ASTM D 7880/D7880M : 2013 | Standard Test Method for Determining Flow Rate of Water and Suspended Solids Retention from a Closed Geosynthetic Bag (Withdrawn 2022) |
| ASTM D 7179 : 2007 | Standard Test Method for Determining Geonet Breaking Force |
| ASTM D 6496/D6496M : 2004 : REV A : R2015 : EDT 1 | Standard Test Method for Determining Average Bonding Peel Strength Between Top and Bottom Layers of Needle-Punched Geosynthetic Clay Liners |
| ASTM D 6454 : 1999 | Standard Test Method for Determining the Short-Term Compression Behavior of Turf Reinforcement Mats (TRMs) |
| ASTM D 7002 : 2016 : REDLINE | Standard Practice for Electrical Leak Location on Exposed Geomembranes Using the Water Puddle Method |
| ASTM D 6636 : 2001 : R2018 | Standard Test Method for Determination of Ply Adhesion Strength of Reinforced Geomembranes |
| ASTM D 5884 : 2004 | Standard Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes |
| ASTM D 6088 : 2006 : R2016 | Standard Practice for Installation of Geocomposite Pavement Drains |
| ASTM D 7408 : 2012 : REDLINE | Standard Specification for Non Reinforced PVC (Polyvinyl Chloride) Geomembrane Seams |
| ASTM D 6365 : 1999 : R2011 | Standard Practice for the Nondestructive Testing of Geomembrane Seams using the Spark Test |
| ASTM D 6241 : 2014 : REDLINE | Standard Test Method for Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe |
| ASTM D 7273/D7273M : 2008 : R2013 : EDT 1 | Standard Guide for for Acceptance Testing Requirements for Geonets and Geonet Drainage Geocomposites |
| ASTM D 5596 : 2003 : R2009 | Standard Test Method for Microscopic Evaluation of the Dispersion of Carbon Black in Polyolefin Geosynthetics |
| ASTM D 7176 : 2006 | Standard Specification for Non-Reinforced Polyvinyl Chloride (PVC) Geomembranes Used in Buried Applications |
| ASTM D 6524/D6524M : 2016 : REDLINE | Standard Test Method for Measuring the Resiliency of Turf Reinforcement Mats (TRMs) |
| ASTM D 7466/D7466M : 2010 : R2015 : EDT 1 | Standard Test Method for Measuring Asperity Height of Textured Geomembranes |
| ASTM D 5886 : 1995 | Standard Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications |
| ASTM D 6244 : 2006 | Standard Test Method for Vertical Compression of Geocomposite Pavement Panel Drains |
| ASTM D 7909 : 2014 | Standard Guide for Placement of Blind Actual Leaks during Electrical Leak Location Surveys of Geomembranes |
| ASTM D 6685 : 2001 : R2008 | Standard Guide for the Selection of Test Methods for Fabrics Used for Fabric Formed Concrete (FFC) |
| ASTM D 7406 : 2007 : R2012 | Standard Test Method for Time-Dependent (Creep) Deformation Under Constant Pressure for Geosynthetic Drainage Products |
| ASTM D 5884/D5884M : 2004 : REV A : R2015 : EDT 1 | Standard Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes |
| ASTM D 7982 : 2015 | Standard Practice for Testing of Factory Thermo-Fusion Seams for Fabricated Geomembrane Panels |
| ASTM D 7361 : 2007 : R2012 | Standard Test Method for Accelerated Compressive Creep of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method |
| ASTM D 4491 : 1999 : REV A : R2004 : EDT 1 | Standard Test Methods for Water Permeability of Geotextiles by Permittivity |
| ASTM D 5970/D5970M : 2016 : REDLINE | Standard Test Method for Deterioration of Geotextiles from Outdoor Exposure |
| ASTM D 6497/D6497M : 2002 : R2015 : EDT 1 | Standard Guide for Mechanical Attachment of Geomembrane to Penetrations or Structures |
| ASTM D 7747/D7747M : 2011 : EDT 1 | Standard Test Method for Determining Integrity of Seams Produced Using Thermo-Fusion Methods for Reinforced Geomembranes by the Strip Tensile Method |
| ASTM D 7177 : 2005 : R2010 | Standard Specification for Air Channel Evaluation of Polyvinyl Chloride (PVC) Dual Track Seamed Geomembranes |
| ASTM D 5262 : 2007 : R2016 | Standard Test Method for Evaluating the Unconfined Tension Creep and Creep Rupture Behavior of Geosynthetics |
| ASTM D 6454 : 1999 : R2011 | Standard Test Method for Determining the Short-Term Compression Behavior of Turf Reinforcement Mats (TRMs) |
| ASTM D 5141 : 2011 | Standard Test Method for Determining Filtering Efficiency and Flow Rate of the Filtration Component of a Sediment Retention Device |
| ASTM D 5888 : 2006 : R2016 | Standard Guide for Storage and Handling of Geosynthetic Clay Liners |
| ASTM D 6140 : 2000 : R2014 | Standard Test Method to Determine Asphalt Retention of Paving Fabrics Used in Asphalt Paving for Full-Width Applications |
| ASTM D 6918 : 2009 : R2014 : EDT 1 | Standard Test Method for Testing Vertical Strip Drains in the Crimped Condition |
| ASTM D 5141 : 2011 : R2018 | Standard Test Method for Determining Filtering Efficiency and Flow Rate of the Filtration Component of a Sediment Retention Device |
| ASTM D 7240 : 2018 : REDLINE | Standard Practice for Electrical Leak Location Using Geomembranes with an Insulating Layer in Intimate Contact with a Conductive Layer via Electrical Capacitance Technique (Conductive-Backed Geomembrane Spark Test) |
| ASTM D 6767 : 2016 : REDLINE | Standard Test Method for Pore Size Characteristics of Geotextiles by Capillary Flow Test |
| ASTM D 6992 : 2016 : REDLINE | Standard Test Method for Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method |
| ASTM D 7005 : 2003 | Standard Test Method for Determining the Bond Strength (Ply Adhesion) of Geocomposites |
| ASTM D 6072/D6072M : 2009 : R2015 | Standard Practice for Obtaining Samples of Geosynthetic Clay Liners |
| ASTM D 7001 : 2006 : R2011 | Standard Specification for Geocomposites for Pavement Edge Drains and Other High-Flow Applications |
| ASTM D 7557/D7557M : 2009 : R2013 : EDT 1 | Standard Practice for Sampling of Expanded Polystyrene Geofoam Specimens |
| ASTM D 7275 : 2007 : R2018 | Standard Test Method for Tensile Properties of Bituminous Geomembranes (BGMs) |
| ASTM D 6707/D6707M : 2006 : R2016 : EDT 1 | Standard Specification for Circular-Knit Geotextile for Use in Subsurface Drainage Applications |
| ASTM D 5596 : 2003 | Standard Test Method for Microscopic Evaluation of the Dispersion of Carbon Black in Polyolefin Geosynthetics |
| ASTM D 7749 : 2011 : R2018 | Standard Test Method for Determining Integrity of Seams Produced Using Thermo-Fusion Methods for Reinforced Geomembranes by the Grab Method |
| ASTM D 7361 : 2007 | Standard Test Method for Accelerated Compressive Creep of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method |
| ASTM D 5494 : 1993 : R1999 : EDT 1 | Standard Test Method for the Determination of Pyramid Puncture Resistance of Unprotected and Protected Geomembranes |
| ASTM D 7407 : 2007 | Standard Guide for Determining The Transmission of Gases Through Geomembranes |
| ASTM D 5885 : 2006 : R2012 | Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry |
| ASTM D 5617 : 2004 | Standard Test Method for Multi-Axial Tension Test for Geosynthetics |
| ASTM D 7274 : 2006 : REV A | Standard Test Method for Mineral Stabilizer Content of Prefabricated Bituminous Geomembranes (BGM) |
| ASTM D 7179 : 2007 : EDT 1 | Standard Test Method for Determining Geonet Breaking Force |
| ASTM D 7007 : 2016 : REDLINE | Standard Practices for Electrical Methods for Locating Leaks in Geomembranes Covered with Water or Earthen Materials |
| ASTM D 7865 : 2013 | Standard Guide for Identification, Packaging, Handling, Storage and Deployment of Fabricated Geomembrane Panels |
| ASTM D 7852 : 2013 | Standard Practice for Use of an Electrically Conductive Geotextile for Leak Location Surveys |
| ASTM D 6524 : 2000 : R2006 | Standard Test Method for Measuring the Resiliency of Turf Reinforcement Mats (TRMs) |
| ASTM D 4873/D4873M : 2017 : REDLINE | Standard Guide for Identification, Storage, and Handling of Geosynthetic Rolls and Samples |
| ASTM D 7272 : 2006 | Standard Test Method for Determining the Integrity of Seams Used in Joining Geomembranes by Pre-manufactured Taped Methods |
| ASTM D 4885 : 2001 : R2006 | Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method |
| ASTM D 6454 : 1999 : R2006 | Standard Test Method for Determining the Short-Term Compression Behavior of Turf Reinforcement Mats (TRMs) |
| ASTM D 8058 : 2017 | Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test |
| ASTM D 5818 : 2011 | Standard Practice for Exposure and Retrieval of Samples to Evaluate Installation Damage of Geosynthetics |
| ASTM D 6636 : 2001 : R2011 | Standard Test Method for Determination of Ply Adhesion Strength of Reinforced Geomembranes |
| ASTM D 6243/D6243M : 2016 : REDLINE | Standard Test Method for Determining the Internal and Interface Shear Strength of Geosynthetic Clay Liner by the Direct Shear Method |
| ASTM D 4594 : 1996 : R2003 | Standard Test Method for Effects of Temperature on Stability of Geotextiles |
| ASTM D 7499/D7499M : 2009 : R2014 | Standard Test Method for Measuring Geosynthetic-Soil Resilient Interface Shear Stiffness |
| ASTM D 4594/D4594M : 1996 : R2015 : EDT 1 | Standard Test Method for Effects of Temperature on Stability of Geotextiles |
| ASTM D 6768/D6768M : 2004 : R2015 : EDT 1 | Standard Test Method for Tensile Strength of Geosynthetic Clay Liners |
| ASTM D 5334 : 2014 : REDLINE | Standard Test Method for Determination of Thermal Conductivity of Soil and Soft Rock by Thermal Needle Probe Procedure |
| ASTM D 5101 : 2012 | TEST METHOD FOR MEASURING THE FILTRATION COMPATIBILITY OF SOIL-GEOTEXTILE SYSTEMS |
| ASTM D 5820 : 1995 : R2011 | Standard Practice for Pressurized Air Channel Evaluation of Dual Seamed Geomembranes |
| ASTM D 6768 : 2004 | Standard Test Method for Tensile Strength of Geosynthetic Clay Liners |
| ASTM D 4833/D4833M : 2007 : R2013 : EDT 1 | Standard Test Method for Index Puncture Resistance of Geomembranes and Related Products |
| ASTM D 5493 : 2006 | Standard Test Method for Permittivity of Geotextiles Under Load |
| ASTM D 6365 : 1999 | Standard Practice for the Nondestructive Testing of Geomembrane Seams using the Spark Test |
| ASTM D 5494 : 1993 : R1999 | Standard Test Method for the Determination of Pyramid Puncture Resistance of Unprotected and Protected Geomembranes |
| ASTM D 6392 : 2012 | Standard Test Method for Determining the Integrity of Nonreinforced Geomembrane Seams Produced Using Thermo-Fusion Methods |
| ASTM D 6637/D6637M : 2015 : REDLINE | Standard Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method |
| ASTM D 6140 : 2000 : R2009 | Standard Test Method to Determine Asphalt Retention of Paving Fabrics Used in Asphalt Paving for Full-Width Applications |
| ASTM D 4595 : 2017 : REDLINE | Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method |
| ASTM D 5994/D5994M : 2010 : R2015 : EDT 1 | Standard Test Method for Measuring Core Thickness of Textured Geomembranes |
| ASTM D 5886 : 1995 : R2001 | Standard Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications |
| ASTM D 5496 : 2015 : REDLINE | Standard Practice for In Field Immersion Testing of Geosynthetics |
| ASTM D 7407 : 2007 : R2012 | Standard Guide for Determining The Transmission of Gases Through Geomembranes |
| ASTM D 8203 : 2018 | Standard Test Method for Determination of the Horizontal Water Flow Rate of a Geosynthetic Screening Material, Product, or Device |
| ASTM D 6455 : 2011 | Standard Guide for the Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGM) |
| ASTM D 5641/D5641M : 2016 : REDLINE | Standard Practice for Geomembrane Seam Evaluation by Vacuum Chamber |
| ASTM D 7180 : 2005 : R2009 | Standard Guide for Use of Expanded Polystyrene (EPS) Geofoam in Geotechnical Projects |
| ASTM D 5262 : 2007 : R2012 | Standard Test Method for Evaluating the Unconfined Tension Creep and Creep Rupture Behavior of Geosynthetics |
| ASTM D 5819 : 2018 : REDLINE | Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability |
| ASTM D 7499/D7499M : 2009 | Standard Test Method for Measuring Geosynthetic-Soil Resilient Interface Shear Stiffness |
| ASTM D 6364 : 2006 : R2011 | Standard Test Method for Determining Short-Term Compression Behavior of Geosynthetics |
| ASTM D 4716 : 2008 : R2013 | Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head |
| ASTM D 6140 : 2000 : R2005 | Standard Test Method to Determine Asphalt Retention of Paving Fabrics Used in Asphalt Paving for Full-Width Applications |
| ASTM D 6916 : 2006 : REV A | Standard Test Method for Determining the Shear Strength Between Segmental Concrete Units (Modular Concrete Blocks) |
| ASTM D 5721 : 2008 | Standard Practice for Air-Oven Aging of Polyolefin Geomembranes |
| ASTM D 4716 : 2008 | Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head |
| ASTM D 6706 : 2001 : R2007 | Standard Test Method for Measuring Geosynthetic Pullout Resistance in Soil |
| ASTM D 4886 : 2018 : REDLINE | Standard Test Method for Abrasion Resistance of Geotextiles (Sandpaper/Sliding Block Method) |
| ASTM D 5641 : 1994 : R2011 | Standard Practice for Geomembrane Seam Evaluation by Vacuum Chamber |
| ASTM D 8057 : 2017 | Standard Specification for Inlet Filters with a Rigid Frame |
| ASTM D 4354 : 2012 : REDLINE | Standard Practice for Sampling of Geosynthetics and Rolled Erosion Control Products(RECPs) for Testing |
| ASTM D 7702/D7702M : 2014 : REDLINE | Standard Guide for Considerations When Evaluating Direct Shear Results Involving Geosynthetics |
| ASTM D 5884 : 2004 : REV A | Standard Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes |
| ASTM D 6916 : 2006 : REV B | Standard Test Method for Determining the Shear Strength Between Segmental Concrete Units (Modular Concrete Blocks) |
| ASTM D 5886 : 1995 : R2011 | Standard Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications |
| ASTM D 6706 : 2001 | Standard Test Method for Measuring Geosynthetic Pullout Resistance in Soil |
| ASTM D 6916 : 2006 : REV C : R2011 | Standard Test Method for Determining the Shear Strength Between Segmental Concrete Units (Modular Concrete Blocks) |
| ASTM D 6636 : 2001 | Standard Test Method for Determination of Ply Adhesion Strength of Reinforced Geomembranes |
| ASTM D 5885 : 2006 | Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry |
| ASTM D 5641 : 1994 : R2006 | Standard Practice for Geomembrane Seam Evaluation by Vacuum Chamber |
| ASTM D 5321/D5321M : 2017 : REDLINE | TEST METHOD FOR DETERMINING THE SHEAR STRENGTH OF SOIL-GEOSYNTHETIC AND GEOSYNTHETIC-GEOSYNTHETIC INTERFACES BY DIRECT SHEAR |
| ASTM D 6461/D6461M : 2018 : REDLINE | Standard Specifications for Silt Fence Materials |
| ASTM D 5886 : 1995 : R2018 | Standard Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications |
| ASTM D 7853 : 2013 | Standard Test Method for Hydraulic Pullout Resistance of a Geomembrane with Locking Extensions Embedded in Concrete |
| ASTM D 5887/D5887M : 2016 : REDLINE | Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter |
| ASTM D 7106/D7106M : 2005 : R2015 : EDT 1 | Standard Guide for Selection of Test Methods for Ethylene Propylene Diene Terpolymer (EPDM) Geomembranes |
| ASTM D 7557 : 2009 | Standard Practice for Sampling of Expanded Polystyrene Geofoam Specimens |
| ASTM D 5818 : 2011 : R2018 | Standard Practice for Exposure and Retrieval of Samples to Evaluate Installation Damage of Geosynthetics |
| ASTM D 7008 : 2008 : R2013 | Standard Specification for Geosynthetic Alternate Daily Covers |
| ASTM D 6141 : 2014-07 | GUIDE FOR SCREENING CLAY PORTION AND INDEX FLUX OF GEOSYNTHETIC CLAY LINER (GCL) FOR CHEMICAL COMPATIBILITY TO LIQUIDS |
| ASTM D 4491 : 1999 : REV A | Standard Test Methods for Water Permeability of Geotextiles by Permittivity |
| ASTM D 4759 : 2011 | Standard Practice for Determining the Specification Conformance of Geosynthetics |
| ASTM D 5567 : 1994 : R1999 | Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems |
| ASTM D 7274 : 2006 : REV A : R2011 | Standard Test Method for Mineral Stabilizer Content of Prefabricated Bituminous Geomembranes (BGM) |
| ASTM D 7001 : 2006 | Standard Specification for Geocomposites for Pavement Edge Drains and Other High-Flow Applications |
| ASTM D 5889/D5889M : 2018 : REDLINE | Standard Practice for Quality Control of Geosynthetic Clay Liners |
| ASTM D 5681 : 2017-09 | TERMINOLOGY FOR WASTE AND WASTE MANAGEMENT |
| ASTM D 7701 : 2011 | Standard Test Method for Determining the Flow Rate of Water and Suspended Solids from a Geotextile Bag (Withdrawn 2020) |
| ASTM D 5101 : 2012 : R2017 | Standard Test Method for Measuring the Filtration Compatibility of Soil-Geotextile Systems |
| ASTM D 7003 : 2003 : R2008 | Standard Test Method for Strip Tensile Properties of Reinforced Geomembranes |
| ASTM D 5494 : 1993 : R2011 | Standard Test Method for the Determination of Pyramid Puncture Resistance of Unprotected and Protected Geomembranes |
| ASTM D 4885 : 2001 : R2011 | Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method |
| ASTM D 6707 : 2006 | Standard Specification for Circular-Knit Geotextile for Use in Subsurface Drainage Applications |
| ASTM D 5886 : 1995 : R2006 | Standard Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications |
| ASTM D 6817/D6817M : 2017 : REDLINE | Standard Specification for Rigid Cellular Polystyrene Geofoam |
| ASTM D 7498/D7498M : 2009 : R2014 : EDT 1 | Standard Test Method for Vertical Strip Drains Using a Large Scale Consolidation Test |
| ASTM D 5567 : 1994 : R2006 | Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems |
| ASTM D 7177/D7177M : 2005 : R2015 : EDT 1 | Standard Specification for Air Channel Evaluation of Polyvinyl Chloride (PVC) Dual Track Seamed Geomembranes |
| ASTM D 5820 : 1995 | Standard Practice for Pressurized Air Channel Evaluation of Dual Seamed Geomembranes |
| ASTM D 7748 : 2012 : EDT 1 | Standard Test Method for Flexural Rigidity of Geogrids, Geotextiles and Related Products |
| ASTM D 7275 : 2007 : R2012 | Standard Test Method for Tensile Properties of Bituminous Geomembranes (BGM) |
| ASTM D 6454/D6454M : 1999 : R2016 : EDT 1 | Standard Test Method for Determining the Short-Term Compression Behavior of Turf Reinforcement Mats (TRMs) |
| ASTM D 5567 : 1994 : R2001 | Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems |
| ASTM D 7747 : 2011 | Standard Test Method for Determining Integrity of Seams Produced Using Thermo-Fusion Methods for Reinforced Geomembranes by the Strip Tensile Method |
| ASTM D 7004 : 2003 | Standard Test Method for Grab Tensile Properties of Reinforced Geomembranes |
| ASTM D 6685 : 2001 : R2015 | Standard Guide for the Selection of Test Methods for Fabrics Used for Fabric Formed Concrete (FFC) (Withdrawn 2024) |
| ASTM D 5747/D5747M : 2008 : R2013 : EDT 1 | Standard Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids |
| ASTM D 6575/D6575M : 2016 : REDLINE | Standard Test Method for Determining Stiffness of Geosynthetics Used as Turf Reinforcement Mats (TRMs) |
| ASTM D 7703 : 2016 : REDLINE | Standard Practice for Electrical Leak Location on Exposed Geomembranes Using the Water Lance Method |
| ASTM D 6693 : 2004 | Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes |
| ASTM D 5514 : 2006 | Standard Test Method for Large Scale Hydrostatic Puncture Testing of Geosynthetics |
| ASTM D 6916 : 2006 : REV C | Standard Test Method for Determining the Shear Strength Between Segmental Concrete Units (Modular Concrete Blocks) |
| ASTM D 7953 : 2014 | Standard Practice for Electrical Leak Location on Exposed Geomembranes Using the Arc Testing Method |
| ASTM D 6365 : 1999 : R2006 | Standard Practice for the Nondestructive Testing of Geomembrane Seams using the Spark Test |
| ASTM D 7465 : 2008 | Standard Specification for Ethylene Propylene Diene Terpolymer (EPDM) Sheet Used In Geomembrane Applications |
| ASTM D 7931 : 2018 : REDLINE | Standard Guide for Specifying Drainage Geocomposites |
| ASTM D 6747 : 2015 : REDLINE | Standard Guide for Selection of Techniques for Electrical Leak Location of Leaks in Geomembranes |
| ASTM D 4759 : 2011 : R2018 | Standard Practice for Determining the Specification Conformance of Geosynthetics |
| ASTM D 4716/D4716M : 2014 : REDLINE | Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head |
| ASTM D 7406 : 2007 | Standard Test Method for Time-Dependent (Creep) Deformation Under Constant Pressure for Geosynthetic Drainage Products |
| ASTM D 6574 : 2000 : R2006 | Standard Test Method for Determining the (In-Plane) Hydraulic Transmissivity of a Geosynthetic by Radial Flow |
| ASTM D 5494 : 1993 : R2006 | Standard Test Method for the Determination of Pyramid Puncture Resistance of Unprotected and Protected Geomembranes |
| ASTM D 5322 : 2017 : REDLINE | Standard Practice for Laboratory Immersion Procedures for Evaluating the Chemical Resistance of Geosynthetics to Liquids |
| ASTM D 7179 : 2007 : R2013 | Standard Test Method for Determining Geonet Breaking Force |
| ASTM D 5888 : 2006 : R2011 | Standard Guide for Storage and Handling of Geosynthetic Clay Liners |
| ASTM D 6685 : 2001 | Standard Guide for the Selection of Test Methods for Fabrics Used for Fabric Formed Concrete |
| ASTM D 7176 : 2006 : R2011 | Standard Specification for Non-Reinforced Polyvinyl Chloride (PVC) Geomembranes Used in Buried Applications |
| ASTM D 5493 : 2006 : R2011 | Standard Test Method for Permittivity of Geotextiles Under Load |
| ASTM D 5888 : 2006 | Standard Guide for Storage and Handling of Geosynthetic Clay Liners |
| ASTM D 7106 : 2005 : R2010 | Standard Guide for Selection of Test Methods for Ethylene Propylene Diene Terpolymer (EPDM) Geomembranes |
| ASTM D 8172 : 2018 | Standard Test Method for Shear and Peel Strength of Solvent-Welded Seams with Nonreinforced Geomembranes |
| ASTM D 5567 : 1994 : R2011 | Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems |
| ASTM D 6088 : 2006 : R2011 | Standard Practice for Installation of Geocomposite Pavement Drains |
| ASTM D 6388 : 1999 : R2012 | Standard Practice for Tests to Evaluate the Chemical Resistance of Geonets to Liquids |
| AASHTO M 288 : 2015 | SPECIFICATION FOR GEOSYNTHETIC SPECIFICATION FOR HIGHWAY APPLICATIONS |
| ASTM D 7004 : 2003 : R2008 | Standard Test Method for Grab Tensile Properties of Reinforced Geomembranes |
| ASTM D 7274 : 2006 | Standard Test Method for Mineral Stabilizer Content of Prefabricated Bituminous Geomembranes (BGM) |
| ASTM D 6475 : 2017 | Standard Test Method for Measuring Mass per Unit Area of Erosion Control Blankets (Withdrawn 2026) |
| ASTM D 6140 : 2000 | Standard Test Method to Determine Asphalt Retention of Paving Fabrics Used in Asphalt Paving for Full-Width Applications |
| ASTM D 6693/D6693M : 2004 : R2015 : EDT 1 | Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes |
| ASTM D 8117 : 2017 | Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by Differential Scanning Calorimetry |
| ASTM D 7556 : 2010 | Standard Test Methods for Determining Small-Strain Tensile Properties of Geogrids and Geotextiles by In-Air Cyclic Tension Tests |
| ASTM D 7180 : 2005 | Standard Guide for Use of Expanded Polystyrene (EPS) Geofoam in Geotechnical Projects |
| ASTM D 5885/D5885M : 2017 : REDLINE | Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry |
| ASTM D 5101 : 2012 | Standard Test Method for Measuring the Filtration Compatibility of Soil-Geotextile Systems |
| ASTM D 7008 : 2008 | Standard Specification for Geosynthetic Alternate Daily Covers |
| ASTM D 7273 : 2008 | Standard Guide for for Acceptance Testing Requirements for Geonets and Geonet Drainage Geocomposites |
| ASTM D 6916 : 2006 | Standard Test Method for Determining the Shear Strength Between Segmental Concrete Units (Modular Concrete Blocks) |
| ASTM D 4491 : 1999 : REV A : R2004 | Standard Test Methods for Water Permeability of Geotextiles by Permittivity |
| ASTM D 7749 : 2011 | Standard Test Method for Determining Integrity of Seams Produced Using Thermo-Fusion Methods for Reinforced Geomembranes by the Grab Method |
| ASTM D 6455 : 2011 : R2018 | Standard Guide for the Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGMs) |
| ASTM D 7747/D7747M : 2011 : R2018 | Standard Test Method for Determining Integrity of Seams Produced Using Thermo-Fusion Methods for Reinforced Geomembranes by the Strip Tensile Method |
| ASTM D 4491 : 1999 : REV A : R2014 : EDT 1 | Standard Test Methods for Water Permeability of Geotextiles by Permittivity |
| ASTM D 5820 : 1995 : R2001 : EDT 1 | Standard Practice for Pressurized Air Channel Evaluation of Dual Seamed Geomembranes |
| ASTM D 6524 : 2000 : R2011 | Standard Test Method for Measuring the Resiliency of Turf Reinforcement Mats (TRMs) |
| ASTM D 6392 : 2012 : R2018 | Standard Test Method for Determining the Integrity of Nonreinforced Geomembrane Seams Produced Using Thermo-Fusion Methods |
| ASTM D 6213 : 2017 : REDLINE | Standard Practice for Tests to Evaluate the Chemical Resistance of Geogrids to Liquids |
| ASTM D 5721 : 2008 : R2013 | Standard Practice for Air-Oven Aging of Polyolefin Geomembranes |
| ASTM D 7274 : 2006 : REV A : R2018 : EDT 1 | Standard Test Method for Mineral Stabilizer Content of Prefabricated Bituminous Geomembranes (PBGMs) |
| ASTM D 5641 : 1994 : EDT 1 | Standard Practice for Geomembrane Seam Evaluation by Vacuum Chamber |
| ASTM D 6766 : 2020 : REV A : REDLINE | Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Aqueous Solutions |
| ASTM D 6088 : 2006 | Standard Practice for Installation of Geocomposite Pavement Drains |
| ASTM D 6072/D6072M : 2009 | Standard Practice for Obtaining Samples of Geosynthetic Clay Liners |
| ASTM D 6102 : 2015 : REDLINE | Standard Guide for Installation of Geosynthetic Clay Liners |
| ASTM D 4751 : 2016 : REDLINE | Standard Test Methods for Determining Apparent Opening Size of a Geotextile |
| ASTM D 5820 : 1995 : R2006 | Standard Practice for Pressurized Air Channel Evaluation of Dual Seamed Geomembranes |
| ASTM D 1987 : 2018 : REDLINE | Standard Test Method for Biological Clogging of Geotextile or Soil/Geotextile Filters |
| ASTM D 5494 : 1993 : R2018 | Standard Test Method for the Determination of Pyramid Puncture Resistance of Unprotected and Protected Geomembranes |
| ASTM D 4491/D4491M : 2017 | Standard Test Methods for Water Permeability of Geotextiles by Permittivity |
| ASTM D 5884 : 2004 : REV A : R2010 | Standard Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes |
| ASTM D 7275 : 2007 | Standard Test Method for Tensile Properties of Bituminous Geomembranes (BGM) |
| ASTM D 6524 : 2000 | Standard Test Method for Measuring the Resiliency of Turf Reinforcement Mats (TRMs) |
| ASTM D 6051 : 2015 | Standard Guide for Composite Sampling and Field Subsampling for Environmental Waste Management Activities |
| ASTM D 5596 : 2003 : R2016 | Standard Test Method For Microscopic Evaluation of the Dispersion of Carbon Black in Polyolefin Geosynthetics |
| ASTM D 4885 : 2001 | Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method |
| ASTM D 7106 : 2005 | Standard Guide for Selection of Test Methods for Ethylene Propylene Diene Terpolymer (EPDM) Geomembranes |
| ASTM D 7361 : 2007 : R2018 | Standard Test Method for Accelerated Compressive Creep of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method |
| ASTM D 6214/D6214M : 1998 : R2013 : EDT 1 | Standard Test Method for Determining the Integrity of Field Seams Used in Joining Geomembranes by Chemical Fusion Methods |
| ASTM D 6364 : 2006 : R2018 | Standard Test Method for Determining Short-Term Compression Behavior of Geosynthetics |
| ASTM D 8030/D8030M : 2016 | Standard Practice for Sample Preparation for GCCM |
| ASTM D 6365 : 1999 : R2018 | Standard Practice for Nondestructive Testing of Geomembrane Seams Using the Spark Test |
| ASTM D 6566 : 2018 : REDLINE | Standard Test Method for Measuring Mass Per Unit Area of Turf Reinforcement Mats |
| ASTM D 7004/D7004M : 2003 : R2013 : EDT 1 | Standard Test Method for Grab Tensile Properties of Reinforced Geomembranes |
| ASTM D 2643/D2643M : 2008 : R2013 : EDT 1 | Standard Specification for Prefabricated Bituminous Geomembrane Used as Canal and Ditch Liner (Exposed Type) |
| ASTM D 5262 :2007 | Standard Test Method for Evaluating the Unconfined Tension Creep and Creep Rupture Behavior of Geosynthetics |
| ASTM D 5820 : 1995 : R2018 | Standard Practice for Pressurized Air Channel Evaluation of Dual-Seamed Geomembranes |
| ASTM D 7005/D7005M : 2016 : REDLINE | Standard Test Method for Determining the Bond Strength (Ply Adhesion) of Geocomposites |
| ASTM D 7005 : 2003 : R2008 | Standard Test Method for Determining the Bond Strength (Ply Adhesion) of Geocomposites |
| ASTM D 4533/D4533M : 2015 : REDLINE | Standard Test Method for Trapezoid Tearing Strength of Geotextiles |
| ASTM D 6244 : 2006 : R2018 | Standard Test Method for Vertical Compression of Geocomposite Pavement Panel Drains |
| ASTM D 4594 : 1996 | Standard Test Method for Effects of Temperature on Stability of Geotextiles |
| ASTM E 2777 : 2014 | Standard Guide for Vegetative (Green) Roof Systems |
| ASTM D 5514/D5514M : 2018 : REDLINE | Standard Test Method for Large-Scale Hydrostatic Puncture Testing of Geosynthetics |
| ASTM D 5641 : 1994 : R2001 : EDT 1 | Standard Practice for Geomembrane Seam Evaluation by Vacuum Chamber |
| ASTM D 7737/D7737M : 2015 : REDLINE | Standard Test Method for Individual Geogrid Junction Strength |
| ASTM D 7177 : 2005 | Standard Specification for Air Channel Evaluation of Polyvinyl Chloride (PVC) Dual Track Seamed Geomembranes |
| ASTM D 6388 : 1999 : R2005 | Standard Practice for Tests to Evaluate the Chemical Resistance of Geonets to Liquids |
| ASTM D 6766 : 2018 : REDLINE | Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Aqueous Solutions |
| ASTM D 7272 : 2006 : R2011 | Standard Test Method for Determining the Integrity of Seams Used in Joining Geomembranes by Pre-manufactured Taped Methods |
| ASTM D 6918 : 2009 | Standard Test Method for Testing Vertical Strip Drains in the Crimped Condition |
| ASTM D 7003 : 2003 | Standard Test Method for Strip Tensile Properties of Reinforced Geomembranes |
| ASTM D 4594 : 1996 : R2009 | Standard Test Method for Effects of Temperature on Stability of Geotextiles |
| ASTM D 5514 : 2006 : R2011 | Standard Test Method for Large Scale Hydrostatic Puncture Testing of Geosynthetics |
| ASTM D 4491 : 1999 : REV A : R2009 | Standard Test Methods for Water Permeability of Geotextiles by Permittivity |
| ASTM D 5617 : 2004 : R2010 | Standard Test Method for Multi-Axial Tension Test for Geosynthetics |
| ASTM D 6388:1999 | Standard Practice for Tests to Evaluate the Chemical Resistance of Geonets to Liquids |
| ASTM D 6693 : 2004 : R2010 | Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes |
| ASTM D 6768 : 2004 : R2009 | Standard Test Method for Tensile Strength of Geosynthetic Clay Liners |
| ASTM D 6244 : 2006 : R2011 | Standard Test Method for Vertical Compression of Geocomposite Pavement Panel Drains |
| ASTM D 7737 : 2011 | Standard Test Method for Individual Geogrid Junction Strength |
| ASTM D 5747/D5747M : 2008 : R2013 : EDT 1 | Standard Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids |
| FED-STD-751 Revision A:1965 | STITCHES, SEAMS, AND STITCHINGS (S/S BY ASTM-D6193) |
| ASTM D 5322 : 2017 : REDLINE | Standard Practice for Laboratory Immersion Procedures for Evaluating the Chemical Resistance of Geosynthetics to Liquids |
| ASTM D 4533/D4533M : 2015 : REDLINE | Standard Test Method for Trapezoid Tearing Strength of Geotextiles |
| ASTM D 4594/D4594M : 1996 : R2015 : EDT 1 | Standard Test Method for Effects of Temperature on Stability of Geotextiles |
| ASTM D 5496 : 2015 : REDLINE | Standard Practice for In Field Immersion Testing of Geosynthetics |
| ASTM D 4354 : 2012 : REDLINE | Standard Practice for Sampling of Geosynthetics and Rolled Erosion Control Products(RECPs) for Testing |
| ASTM D 5994/D5994M : 2010 : R2015 : EDT 1 | Standard Test Method for Measuring Core Thickness of Textured Geomembranes |
| ASTM D 5820 : 1995 | Standard Practice for Pressurized Air Channel Evaluation of Dual Seamed Geomembranes |
| ASTM D 5641/D5641M : 2016 : REDLINE | Standard Practice for Geomembrane Seam Evaluation by Vacuum Chamber |
Summarise
Sorry this product is not available in your region.