• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 7096 : 2019

Current

Current

The latest, up-to-date edition.

Standard Test Method for Determination of the Boiling Range Distribution of Gasoline by Wide-Bore Capillary Gas Chromatography

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-05-2019

This test method covers the determination of the boiling range distribution of gasoline and liquid gasoline blending components.

1.1This test method covers the determination of the boiling range distribution of gasoline and liquid gasoline blending components. It is applicable to petroleum products and fractions with a final boiling point of 280 °C (536 °F) or lower, as measured by this test method.

1.2This test method is designed to measure the entire boiling range of gasoline and gasoline components with either high or low vapor pressure and is commonly referred to as Simulated Distillation (SimDis) by gas chromatographers.

1.3This test method has been validated for gasoline containing ethanol. Gasolines containing other oxygenates are not specifically excluded, but they were not used in the development of this test method.

1.4This test method can estimate the concentration of n-pentane and lighter saturated hydrocarbons in gasoline.

1.5The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.5.1Results in degrees Fahrenheit can be obtained by simply substituting Fahrenheit boiling points in the calculation of the boiling point-retention time correlation.

1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.7This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
D 02
DocumentType
Test Method
Pages
15
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

ASTM D 4057 : 2019 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 6300 : 2020 : REV A Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 5191 : 2022 Standard Test Method for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini Method)
ASTM D 6300 : 2013 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 4057 : 1995 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 4814 : 2004 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 6300 : 2014 : REV A : EDT 1 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 2421 : 2002 : R2007 Standard Practice for Interconversion of Analysis of C<i><inf>5</inf></i> and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Mass Basis
ASTM D 4814 : 2016 : REV C Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 2421 : 2021 Standard Practice for Interconversion of Analysis of C<emph type="ital"><inf>5</inf ></emph> and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Mass Basis
ASTM D 4815 : 2015 : REV B Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C<inf>1</inf> to C<inf>4</inf> Alcohols in Gasoline by Gas Chromatography
ASTM D 5191 : 2018 : REV A Standard Test Method for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini Method)
ASTM D 4814 : 2014 : REV B Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 3700 : 2001 Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder
ASTM D 4814 : 2001 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 5599 : 2022 Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
ASTM D 86 : 2023 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
ASTM D 6300 : 2017 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 4814 : 2004 : REV B : EDT 1 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 2421 : 1995 Standard Practice for Interconversion of Analysis of C<sub>5</sub> and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Weight Basis
ASTM D 86 : 2023 : REV A : EDT 1 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
ASTM E 1510 : 1995 : R2013 : EDT 1 Standard Practice for Installing Fused Silica Open Tubular Capillary Columns in Gas Chromatographs
ASTM D 4814 : 2015 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2000 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 86 : 2020 : REV A Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
ASTM D 6300 : 2017 : REV A Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 4057 : 2012 : R2018 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 5599 : 2000 : R2010 Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
ASTM D 4814 : 2011 : REV B Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 3700 : 2014 Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder
ASTM D 4815 : 2015 : REV B : R2019 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C<inf>1</inf> to C<inf>4</inf> Alcohols in Gasoline by Gas Chromatography
ASTM D 5191 : 2006 : EDT 1 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
ASTM D 4814 : 2018 : REV B Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2024 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 86 : 2018 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
ASTM D 2421 : 2018 Standard Practice for Interconversion of Analysis of C<emph type="ital"><inf>5</inf ></emph> and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Mass Basis
ASTM D 6300 : 2016 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 4815 : 2022 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C<inf>1</inf> to C<inf>4</inf> Alcohols in Gasoline by Gas Chromatography
ASTM D 4057 : 1981 : EDT 2 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 3700 : 1994 Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder
ASTM D 4814 : 2018 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 6300 : 2004 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 5599 : 2018 Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
ASTM D 4814 : 1995 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2009 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2016 : REV : EDT 0 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 5191 : 2001 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
ASTM D 6300 : 2019 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 4814 : 2023 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 2421 : 2001 Standard Practice for Interconversion of Analysis of C<sub>5</sub> and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Weight Basis
ASTM D 4814 : 2020 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 86 : 2019 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
ASTM D 4814 : 2012 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2016 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 5191 : 2010 : REV A Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
ASTM D 4307 : 1999 : R2004 Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards
ASTM D 4814 : 2010 : REV B Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 6300 : 2021 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 6300 : 2019 : REV A Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 4814 : 2003 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2001 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 86 : 2012 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
ASTM D 6300 : 2023 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 6300 : 2020 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 2421 : 2002 Standard Practice for Interconversion of Analysis of C<sub>5</sub> and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Weight Basis
ASTM D 3700 : 2021 Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder
ASTM D 4814 : 2022 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2021 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2008 : REV B Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2021 : REV C Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2023 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2003 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4057 : 2006 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 4626 : 1995 : R2005 Standard Practice for Calculation of Gas Chromatographic Response Factors
ASTM E 1510 : 1995 : R2000 Standard Practice for Installing Fused Silica Open Tubular Capillary Columns in Gas Chromatographs
ASTM D 6300 : 2023 : REV A Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4814 : 2020 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2004 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2016 : REV B Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 5191 : 2012 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
ASTM D 6300 : 2020 : REV B Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4814 : 2010 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2008 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4057 : 2012 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 6300 : 2006 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM E 1510 : 1995 : R2005 Standard Practice for Installing Fused Silica Open Tubular Capillary Columns in Gas Chromatographs
ASTM D 4815 : 1999 : EDT 1 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, <I>tertiary</I>-Amyl Alcohol and C<sub>1</sub> to C<sub>4</sub> Alcohols in Gasoline by Gas Chromatography
ASTM D 5191 : 2003 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
ASTM D 4307 : 1999 Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards
ASTM E 1510 : 1995 : R2021 Standard Practice for Installing Fused Silica Open Tubular Capillary Columns in Gas Chromatographs
ASTM D 86 : 2020 : REV B Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
ASTM D 5191 : 1999 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
ASTM D 4814 : 2009 : REV B Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 6300 : 2014 : REV A Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 6300 : 2015 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 4814 : 2011 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4815 : 2009 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C<sub>1</sub> to C<sub>4</sub> Alcohols in Gasoline by Gas Chromatography
ASTM D 86 : 2016 : REV A Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
ASTM D 6300 : 1999 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 4814 : 2008 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4815 : 2015 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C<inf>1</inf> to C<inf>4</inf> Alcohols in Gasoline by Gas Chromatography
ASTM D 2421 : 2013 Standard Practice for Interconversion of Analysis of C<emph type="ital"><inf>5</inf ></emph> and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Mass Basis
ASTM D 4814 : 2002 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4815 : 2004 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C<sub>1</sub> to C<sub>4</sub> Alcohols in Gasoline by Gas Chromatography
ASTM D 4814 : 2011 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4815 : 1999 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, <I>tertiary</I>-Amyl Alcohol and C<sub>1</sub> to C<sub>4</sub> Alcohols in Gasoline by Gas Chromatography
ASTM D 4814 : 2019 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4307 : 2017 Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards
ASTM D 4814 : 2006 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2007 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 5191 : 2018 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
ASTM D 5191 : 2010 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
ASTM D 4814 : 2018 : REV D Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2016 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 5599 : 2015 Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
ASTM D 4814 : 2006 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 2421 : 2021 : EDT 1 Standard Practice for Interconversion of Analysis of C<emph type="ital"><inf>5</inf ></emph> and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Mass Basis
ASTM D 5599 : 2017 Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
ASTM E 1510 : 1995 Standard Practice for Installing Fused Silica Open Tubular Capillary Columns in Gas Chromatographs
ASTM D 4626 : 1995 : R2019 Standard Practice for Calculation of Gas Chromatographic Response Factors
ASTM D 6300 : 2013 : REV A Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 3700 : 2012 Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder
ASTM D 4814 : 1992 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4815 : 2013 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C<inf>1</inf> to C<inf>4</inf> Alcohols in Gasoline by Gas Chromatography
ASTM D 4814 : 2014 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2015 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 5191 : 2002 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
ASTM D 3700 : 2007 Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder
ASTM D 4307 : 2017 : R2021 Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards
ASTM D 4814 : 2007 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 5191 : 2019 Standard Test Method for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini Method)
ASTM D 86 : 2023 : REV A Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
ASTM D 4814 : 2009 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 5599 : 2000 : R2005 Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
ASTM D 6300 : 2008 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 4307 : 1999 : R2010 Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards
ASTM D 6300 : 2003 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 4815 : 2003 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C<sub>1</sub> to C<sub>4</sub> Alcohols in Gasoline by Gas Chromatography
ASTM D 4814 : 2018 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 6300 : 2007 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 4814 : 2013 : REV B Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4626 : 2023 Standard Practice for Calculation of Gas Chromatographic Response Factors
ASTM D 4814 : 2016 : REV D Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2017 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2021 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2000 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 86 : 2020 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
ASTM D 4626 : 1995 : R2015 Standard Practice for Calculation of Gas Chromatographic Response Factors
ASTM D 4814 : 2013 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 6300 : 2002 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 4626 : 1995 : R2000 Standard Practice for Calculation of Gas Chromatographic Response Factors
ASTM D 4057 : 2022 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 4814 : 2004 : REV B Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 5191 : 2004 : REV A Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
ASTM D 6300 : 2016 : REV A Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 5191 : 2020 Standard Test Method for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini Method)
ASTM D 86 : 2015 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
ASTM D 5599 : 2000 Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
ASTM D 4814 : 1993 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 5191 : 2007 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
ASTM D 3700 : 2016 Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder
ASTM D 4814 : 2019 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4057 : 1995 : R2000 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 4626 : 1995 : R2010 Standard Practice for Calculation of Gas Chromatographic Response Factors
ASTM D 5191 : 2015 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
ASTM D 4814 : 2014 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4815 : 2015 : REV A Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C<inf>1</inf> to C<inf>4</inf> Alcohols in Gasoline by Gas Chromatography
ASTM D 4814 : 2018 : REV C Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4307 : 1999 : R2015 Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards
ASTM D 6300 : 2014 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 4057 : 2006 : R2011 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 86 : 2017 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
ASTM D 5191 : 2010 : REV B Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
ASTM D 4814 : 2021 : REV B Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 4814 : 2007 : REV B Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 5191 : 2013 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
ASTM D 5191 : 2006 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
ASTM D 4814 : 2013 : REV A Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 2421 : 2019 Standard Practice for Interconversion of Analysis of C<emph type="ital"><inf>5</inf ></emph> and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Mass Basis
ASTM D 6300 : 2024 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants

View more information
£58.92
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.