• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 975 : 2019 : REV B

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Specification for Diesel Fuel
Available format(s)

Hardcopy , PDF

Superseded date

10-09-2020

Language(s)

English

Published date

26-07-2019

1.1This specification covers seven grades of diesel fuel suitable for various types of diesel engines. These grades are described as follows:

1.1.1Grade No. 1-D S15—A special-purpose, light middle distillate fuel for use in diesel engine applications requiring a fuel with 15 ppm sulfur (maximum) and higher volatility than that provided by Grade No. 2-D S15 fuel.2

1.1.2Grade No. 1-D S500—A special-purpose, light middle distillate fuel for use in diesel engine applications requiring a fuel with 500 ppm sulfur (maximum) and higher volatility than that provided by Grade No. 2-D S500 fuel.2

1.1.3Grade No. 1-D S5000—A special-purpose, light middle distillate fuel for use in diesel engine applications requiring a fuel with 5000 ppm sulfur (maximum) and higher volatility than that provided by Grade No. 2-D S5000 fuels.

1.1.4Grade No. 2-D S15—A general purpose, middle distillate fuel for use in diesel engine applications requiring a fuel with 15 ppm sulfur (maximum). It is especially suitable for use in applications with conditions of varying speed and load.2

1.1.5Grade No. 2-D S500—A general-purpose, middle distillate fuel for use in diesel engine applications requiring a fuel with 500 ppm sulfur (maximum). It is especially suitable for use in applications with conditions of varying speed and load.2

1.1.6Grade No. 2-D S5000—A general-purpose, middle distillate fuel for use in diesel engine applications requiring a fuel with 5000 ppm sulfur (maximum), especially in conditions of varying speed and load.

1.1.7Grade No. 4-D—A heavy distillate fuel, or a blend of distillate and residual oil, for use in low- and medium-speed diesel engines in applications involving predominantly constant speed and load.

Note 1:A more detailed description of the grades of diesel fuels is given in X1.2.

Note 2:The Sxxx designation has been adopted to distinguish grades by sulfur rather than using words such as “Low Sulfur” as previously because the number of sulfur grades is growing and the word descriptions were thought to be not precise. S5000 grades correspond to the so-called “regular” sulfur grades, the previous No. 1-D and No. 2-D. S500 grades correspond to the previous “Low Sulfur” grades. S15 grades were not in the previous grade system and are commonly referred to as “Ultra-Low Sulfur” grades or ULSD.

1.2This specification, unless otherwise provided by agreement between the purchaser and the supplier, prescribes the required properties of diesel fuels at the time and place of delivery.

1.2.1Nothing in this specification shall preclude observance of federal, state, or local regulations which can be more restrictive.

Note 3:The generation and dissipation of static electricity can create problems in the handling of distillate diesel fuels. For more information on the subject, see Guide D4865.

1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
D 02
DocumentType
Standard
Pages
0
PublisherName
American Society for Testing and Materials
Status
Superseded
Supersedes

ASTM D 7545 : 2014 : R2019 : EDT 1 Standard Test Method for Oxidation Stability of Middle Distillate Fuels—Rapid Small Scale Oxidation Test (RSSOT)
ASTM D 2709 : 2016 Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
ASTM D 6078 : 2004 : R2016 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the Scuffing Load Ball-on-Cylinder Lubricity Evaluator (SLBOCLE) (Withdrawn 2021)
ASTM D 6890 : 2018 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM F 852/F852M : 2020 Standard Specification for Portable Gasoline, Kerosene, and Diesel Containers for Consumer Use
ASTM D 7464 : 2020 Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing
ASTM D 8183 : 2018 Standard Test Method for Determination of Indicated Cetane Number (ICN) of Diesel Fuel Oils using a Constant Volume Combustion Chamber—Reference Fuels Calibration Method
ASTM D 7467 : 2020 : REV A Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
ASTM D 4539 : 2017 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)
ASTM D 7061 : 2019 : EDT 1 Standard Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene-Containing Heavy Fuel Oils as Separability Number by an Optical Scanning Device
ASTM D 613 : 2018 : REV A : EDT 1 Standard Test Method for Cetane Number of Diesel Fuel Oil
ASTM D 2068 : 2020 Standard Test Method for Determining Filter Blocking Tendency
ASTM D 7688 : 2018 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR) by Visual Observation
ASTM D 6217 : 2018 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
ASTM D 6728 : 2016 Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry
ASTM D 7806 : 2020 Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Ester) and Triglyceride Content in Diesel Fuel Oil Using Mid-Infrared Spectroscopy (FTIR Transmission Method)
ASTM D 7344 : 2017 : REV A Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Mini Method)
ASTM D 7668 : 2017 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method
ASTM F 2874 : 2020 Standard Specification for One Time Use Portable Emergency Fuel Containers (PEFC) for Use by Consumers
ASTM D 2274 : 2014 : R2019 Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
ASTM D 4868 : 2017 Standard Test Method for Estimation of Net and Gross Heat of Combustion of Hydrocarbon Burner and Diesel Fuels
ASTM D 7451 : 2020 Standard Test Method for Water Separation Properties of Light and Middle Distillate, and Compression and Spark-Ignition Engine Fuels
ASTM D 2880 : 2020 Standard Specification for Gas Turbine Fuel Oils
ASTM D 6468 : 2008 : R2019 Standard Test Method for High Temperature Stability of Middle Distillate Fuels
ASTM D 6258 : 2017 Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels
ASTM D 6469 : 2020 Standard Guide for Microbial Contamination in Fuels and Fuel Systems
ASTM F 1990 : 2019 Standard Guide for In-Situ Burning of Spilled Oil: Ignition Devices
ASTM D 7591 : 2012 : R2017 Standard Test Method for Determination of Free and Total Glycerin in Biodiesel Blends by Anion Exchange Chromatography
ASTM D 6426 : 2018 Standard Test Method for Determining Filterability of Middle Distillate Fuel Oils
ASTM D 6756 : 2017 Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer
ASTM D 7463 : 2018 Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures, and Fuel Associated Water
ASTM D 8070 : 2020 Standard Test Method for Screening of Fuels and Fuel Associated Aqueous Specimens for Microbial Contamination by Lateral Flow Immunoassay
ASTM D 7932 : 2017 Standard Specification for Printed, Pressure-Sensitive Adhesive Labels for Use in Extreme Distribution Environments
ASTM D 5304 : 2020 Standard Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure
ASTM D 7619 : 2017 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
ASTM D 6748 : 2002 : REV A : R2017 Standard Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones (Rapid Method by Portable Spectrophotometer)
ASTM D 7978 : 2014 : R2019 Standard Test Method for Determination of the Viable Aerobic Microbial Content of Fuels and Associated Water—Thixotropic Gel Culture Method
ASTM D 7548 : 2016 : REV A Standard Test Method for Determination of Accelerated Iron Corrosion in Petroleum Products
ASTM D 8181 : 2019 Standard Specification for Microemulsion Blendstock for Preparing Microemulsion Test Fuel Oils
ASTM D 8149 : 2020 Standard Practice for Optimization, Calibration, and Validation of Ion Chromatographic Determination of Heteroatoms and Anions in Petroleum Products and Lubricants
ASTM D 8074 : 2019 Standard Test Method for Evaluation of Diesel Engine Oils in DD13 Diesel Engine
ASTM D 471 : 2016 : REV A Standard Test Method for Rubber Property—Effect of Liquids
ASTM D 396 : 2020 Standard Specification for Fuel Oils
ASTM D 7261 : 2017 Standard Test Method for Determining Water Separation Characteristics of Diesel Fuels by Portable Separometer
ASTM D 7371 : 2014 Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)
ASTM D 6751 : 2020 : REV A Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 4865 : 2019 Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems
ASTM E 1259 : 2018 Standard Practice for Evaluation of Antimicrobials in Liquid Fuels Boiling Below 390 °C
ASTM D 7861 : 2014 : R2019 Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Diesel Fuel by Linear Variable Filter (LVF) Array Based Mid-Infrared Spectroscopy
ASTM D 4737 : 2010 : R2016 Standard Test Method for Calculated Cetane Index by Four Variable Equation
ASTM D 6079 : 2018 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)
ASTM D 7687 : 2017 Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration
ASTM D 8274 : 2020 : REV A Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil by Portable Rapid Mid-Infrared Analyzer
ASTM D 7827 : 2019 Standard Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene from Heavy Fuel Oils as Separability Number by an Optical Device
ASTM D 130 : 2019 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
ASTM D 7215 : 2016 Standard Test Method for Calculated Flash Point from Simulated Distillation Analysis of Distillate Fuels
ASTM D 4625 : 2016 : EDT 1 Standard Test Method for Middle Distillate Fuel Storage Stability at 43 °C (110 °F)
ASTM D 7042 : 2021 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM F 715 : 2007 : R2018 Standard Test Methods for Coated Fabrics Used for Oil Spill Control and Storage
ASTM D 7095 : 2017 Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip

ASTM D 6890 : 2015 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 7861 : 2014 : EDT 1 Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Diesel Fuel by Linear Variable Filter (LVF) Array Based Mid-Infrared Spectroscopy
ASTM D 2622 : 1987 : EDT 1 Standard Test Method for Sulfur in Petroleum Products by X-Ray Spectrometry
ASTM D 4865 : 2009 : R2014 Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems
ASTM D 4539 : 2016 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)
ASTM D 7467 : 2018 : REV A Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
ASTM D 1319 : 1989 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Absorption
ASTM D 5453 : 2000 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
ASTM D 6371 : 1999 Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels
ASTM D 4176 : 1993 : R1997 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
ASTM D 6890 : 2003 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 4308 : 1995 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
ASTM D 4306 : 1997 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM D 6078 : 1999 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the Scuffing Load Ball-on-Cylinder Lubricity Evaluator (SLBOCLE)
ASTM E 1064 : 2000 Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
ASTM D 1552 : 2016 Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conducitivity Detection (TCD)
ASTM D 2500 : 2016 Standard Test Method for Cloud Point of Petroleum Products
ASTM D 7467 : 2008 Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
ASTM D 4057 : 1981 : EDT 2 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 5772 : 2015 Standard Test Method for Cloud Point of Petroleum Products (Linear Cooling Rate Method)
ASTM D 7094 : 2016 Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
ASTM D 7467 : 2017 Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
ASTM D 5773 : 2015 : REV A Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)
ASTM D 7467 : 2015 Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
ASTM D 7170 : 2016 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Fixed Range Injection Period, Constant Volume Combustion Chamber Method (Withdrawn 2019)
ASTM D 2887 : 1999 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 5842 : 1995 : R2000 Standard Practice for Sampling and Handling of Fuels for Volatility Measurement
ASTM D 7467 : 2015 : REV A Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
ASTM D 6890 : 2016 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 5773 : 2017 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Constant Cooling Rate Method)
ASTM D 7545 : 2009 Standard Test Method for Oxidation Stability of Middle Distillate Fuels<span class='unicode'>—</span>Rapid Small Scale Oxidation Test (RSSOT)
ASTM D 7344 : 2017 : REV A Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Mini Method)
ASTM D 2880 : 2018 Standard Specification for Gas Turbine Fuel Oils
ASTM D 6751 : 2015 : REV B Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 7467 : 2015 : EDT 1 Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
ASTM D 7467 : 2015 : REV C Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
ASTM D 6751 : 2015 : REV C Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 6898 : 2003 Standard Test Method for Evaluating Diesel Fuel Lubricity by an Injection Pump Rig
ASTM D 6304 : 2000 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration
ASTM D 7344 : 2014 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Mini Method)
ASTM D 6751 : 2015 : REV A Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 7619 : 2010 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter <a href="#fn00005"></a>
ASTM D 5453 : 2016 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 7467 : 2014 Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
ASTM D 2624 : 2000 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
ASTM D 6751 : 2002 Standard Specification for Biodiesel Fuel (B100) Blend Stock for Distillate Fuels
ASTM D 7042 : 2004 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 7039 : 2004 Standard Test Method for Sulfur in Gasoline and Diesel Fuel by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 2274 : 1994 : R1999 : EDT 1 Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
ASTM D 8148 : 2017 Standard Test Method for Spectroscopic Determination of Haze in Fuels
ASTM D 6371 : 2016 Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels
ASTM D 7688 : 2011 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR) by Visual Observation
ASTM D 2880 : 2015 Standard Specification for Gas Turbine Fuel Oils
ASTM D 7668 : 2010 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils<char: emdash>Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method
ASTM D 7039 : 2015 Standard Test Method for Sulfur in Gasoline, Diesel Fuel, Jet Fuel, Kerosine, Biodiesel, Biodiesel Blends, and Gasoline-Ethanol Blends by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 5854 : 1996 : R2000 Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
ASTM D 7170 : 2006 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils-Fixed Range Injection Period, Constant Volume Combustion Chamber Method
ASTM D 2709 : 1988 Standard Test Method for Water and Sediment in Distillate Fuels by Centrifuge
ASTM D 7345 : 2007 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure (Micro Distillation Method
ASTM D 4737 : 1996 : REV A Standard Test Method for Calculated Cetane Index by Four Variable Equation
ASTM D 7371 : 2007 Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)
ASTM D 6469 : 1999 Standard Guide for Microbial Contamination in Fuels and Fuel Systems
ASTM D 7861 : 2014 Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Diesel Fuel by Linear Variable Filter (LVF) Array Based Mid-Infrared Spectroscopy
ASTM D 7467 : 2015 : REV C : EDT 1 Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
ASTM D 7467 : 2015 : REV B Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
ASTM D 7345 : 2014 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Micro Distillation Method)
ASTM D 6890 : 2015 : REV A Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 6751 : 2015 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 6898 : 2003 : R2016 Standard Test Method for Evaluating Diesel Fuel Lubricity by an Injection Pump Rig (Withdrawn 2021)
ASTM D 4294 : 2016 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
ASTM D 6890 : 2015 : REV B Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 6079 : 1999 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)
ASTM D 6468 : 1999 Standard Test Method for High Temperature Stability of Distillate Fuels
ASTM D 7467 : 2018 Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
ASTM D 7094 : 2004 Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
ASTM D 8183 : 2018 Standard Test Method for Determination of Indicated Cetane Number (ICN) of Diesel Fuel Oils using a Constant Volume Combustion Chamber—Reference Fuels Calibration Method
ASTM D 7344 : 2007 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure (Mini Method)
ASTM D 5773 : 2015 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)
ASTM D 1552 : 1983 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
ASTM D 5771 : 2015 Standard Test Method for Cloud Point of Petroleum Products (Optical Detection Stepped Cooling Method)
ASTM D 3828 : 2016 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D 7094 : 2017 Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
ASTM D 3828 : 1997 Standard Test Methods for Flash Point by Small Scale Closed Tester
ASTM D 6217 : 1998 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
ASTM D 2880 : 2014 : REV A Standard Specification for Gas Turbine Fuel Oils

View more information
£90.16
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.