ASTM E 105 : 2016 : REDLINE
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Probability Sampling of Materials
Available format(s)
PDF
Language(s)
English
Published date
01-04-2016
Superseded date
01-07-2021
Superseded by
£50.78
Excluding VAT
CONTAINED IN VOL. 14.02, 2016 Defines a statement of principles for the guidance of ASTM technical committees and others in the preparation of a sampling plan for a specific material.
| Committee |
E 11
|
| DocumentType |
Redline
|
| Pages |
6
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1This practice is primarily a statement of principles for the guidance of ASTM technical committees and others in the preparation of a sampling plan for a specific material.
| NACE SP 02 90 : 2007 | IMPRESSED CURRENT CATHODIC PROTECTION OF REINFORCING STEEL IN ATMOSPHERICALLY EXPOSED CONCRETE STRUCTURES |
| ASTM C 1076 : 2009 : R2015 | Standard Specification for Nuclear Grade Hafnium Oxide Pellets |
| AASHTO M 242M/M 242 : 2015 | SPECIFICATION FOR REINFORCED CONCRETE D-LOAD CULVERT, STORM DRAIN, AND SEWER PIPE |
| ASTM F 766 : 1982 : R2005 | Standard Test Method for Melting Point of Waxes |
| ASTM E 456 : 2013 | Standard Terminology Relating to Quality and Statistics |
| AASHTO R 42 : 2006(R 2016) | PRACTICE FOR DEVELOPING A QUALITY ASSURANCE PLAN FOR HOT MIX ASPHALT (HMA) |
| NACE SP 02 16 : 2016 | SACRIFICIAL CATHODIC PROTECTION OF REINFORCING STEEL IN ATMOSPHERICALLY EXPOSED CONCRETE STRUCTURES |
| ASTM E 456 : 2013 : REV A | Standard Terminology Relating to Quality and Statistics |
| ASTM C 92 : 1995 : R2005 | Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials |
| ASTM D 3198 : 1997 : R2007 | Standard Test Method for Application and Removal Torque of Threaded or Lug-Style Closures (Withdrawn 2016) |
| ASTM F 1819 : 2007 : R2013 | Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood Using a Mechanical Pressure Technique |
| NACE SP 01 07 : 2017 | ELECTROCHEMICAL REALKALIZATION AND CHLORIDE EXTRACTION FOR REINFORCED CONCRETE |
| ASTM E 1367 : 2003 : R2014 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates |
| ASTM D 3633 : 1998 | Standard Test Method for Electrical Resistivity of Membrane-Pavement Systems |
| MIL-T-48260 Base Document:1973 | Tape, Polyester (For Use in Ammunition) |
| AASHTO T 325 : 2004(R2016) | METHOD OF TEST FOR ESTIMATING THE STRENGTH OF CONCRETE IN TRANSPORTATION CONSTRUCTION BY MATURITY TESTS |
| ASTM C 752 : 2013 : R2016 | Standard Specification for Nuclear-Grade Silver-Indium-Cadmium Alloy |
| ASTM C 92 : 1995 : R2015 | Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials |
| ASTM C 1065 : 2008 : R2015 | Standard Specification for Nuclear-Grade Zirconium Oxide Powder |
| ASTM E 703 : 2014 : REDLINE | Standard Practice for Electromagnetic (Eddy Current) Sorting of Nonferrous Metals |
| ASTM C 992 : 2016 : REDLINE | Standard Specification for Boron-Based Neutron Absorbing Material Systems for Use in Nuclear Fuel Storage Racks in a Pool Environment |
| ASTM D 5154/D5154M : 2018 | Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test |
| ASTM C 888 : 2003 : R2014 | Standard Specification for Nuclear-Grade Gadolinium Oxide (Gd<inf>2</inf>O<inf>3</inf >) Powder |
| ASTM C 751 : 2016 : REDLINE | Standard Specification for Nuclear-Grade Boron Carbide Pellets |
| ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
| ASTM C 92 : 1995 : R1999 | Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials |
| ASTM F 778 : 1988 : R2001 | Standard Methods for Gas Flow Resistance Testing of Filtration Media |
| ASTM D 4271 : 1988 : R2001 | Standard Practice for Writing Statements on Sampling in Test Methods for Textiles (Withdrawn 2009) |
| ASTM C 429 : 2016 : REDLINE | Standard Test Method for Sieve Analysis of Raw Materials for Glass Manufacture |
| ASTM B 579 : 1973 : R2015 | Standard Specification for Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate) |
| ASTM D 2229 : 2010 | Standard Test Method for Adhesion Between Steel Tire Cords and Rubber |
| ASTM F 1543 : 1996 | Standard Specification for Shock Attenuation Properties of Fencing Surfaces |
| ASTM C 92 : 1995 : R2010 | Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials |
| ASTM D 3198 : 1997 : R2002 | Standard Test Method for Application and Removal Torque of Threaded or Lug-Style Closures |
| ASTM F 2232 : 2014 : REDLINE | Standard Test Method for Determining the Longitudinal Load Required to Detach High Heels from Footwear |
| ASTM C 785 : 2008 | Standard Specification for Nuclear-Grade Aluminum Oxide Pellets |
| ASTM D 7257 : 2006 : R2011 | Standard Test Method for Automated Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions (Withdrawn 2018) |
| ASTM B 579 : 1973 : R2004 | Standard Specification for Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate) |
| ASTM E 688 : 1994 : R1999 | Standard Test Methods for Waste Glass as a Raw Material for Glass Manufacturing |
| ASTM F 766 : 1982 : R2000 : EDT 1 | Standard Test Method for Melting Point of Waxes |
| ASTM F 1671/F1671M : 2013 : REDLINE | Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System |
| ASTM E 447 : 1997 | Test Methods for Compressive Strength of Laboratory Constructed Masonry Prisms (Withdrawn 1998) |
| ASTM E 456 : 2013 : REV A : EDT 3 | Standard Terminology Relating to Quality and Statistics |
| ASTM D 4463 : 1996 : R2006 | Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts |
| ASTM E 1367 : 2003 : EDT 1 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates |
| ASTM E 1004 : 2017 : REDLINE | Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Method |
| ASTM C 1845 : 2016 | Standard Practice for The Separation of Lanthanide Elements from Uranium Matrices Using High Pressure Ion Chromatography (HPIC) for Isotopic Analyses by Inductively Coupled Plasma Mass Spectrometry (ICP-MS) |
| ASTM D 1977 : 2016 : REDLINE | Standard Test Method for Nickel and Vanadium in FCC Equilibrium Catalysts by Hydrofluoric/Sulfuric Acid Decomposition and Atomic Spectroscopic Analysis |
| ASTM C 1066 : 2009 | Standard Specification for Nuclear Grade Zirconium Oxide Pellets |
| ASTM D 3665 : 2012 : R2017 | Standard Practice for Random Sampling of Construction Materials |
| ASTM C 50/C50M : 2013 : REDLINE | Standard Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products |
| ASTM E 456 : 2013 : REV A : R2017 : EDT 2 | Standard Terminology Relating to Quality and Statistics |
| ASTM E 1367 : 2003 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates |
| ASTM C 1031 : 2011 | Standard Specification for Nuclear-Grade Aluminum Oxide Powder |
| ASTM D 3283 : 1998 : R2004 | Standard Specification for Air as an Electrical Insulating Material |
| ASTM D 7026 : 2013 | Standard Guide for Sampling and Reporting of Results for Determination of Biobased Content of Materials via Carbon Isotope Analysis (Withdrawn 2020) |
| AASHTO R 38 : 2010(R2018) | PRACTICE FOR QUALITY ASSURANCE OF STANDARD MANUFACTURED MATERIALS |
| ASTM C 1334 : 2005 | Standard Specification for Uranium Oxides with a <sup>235</sup>U Content of Less Than 5 % for Dissolution Prior to Conversion to Nuclear-Grade Uranium Dioxide |
| ASTM D 5644 : 2001 : R2013 | Standard Test Methods for Rubber Compounding Materials—Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber |
| ASTM D 1933 : 2003 : R2017 | Standard Specification for Nitrogen Gas as an Electrical Insulating Material |
| AASHTO T 346 : 2013 | METHOD OF TEST FOR GLASS BEADS USED IN PAVEMENT MARKINGS |
| ASTM D 2229 : 2010 : R2014 | Standard Test Method for Adhesion Between Steel Tire Cords and Rubber (Withdrawn 2023) |
| ASTM F 778 : 1988 : R2014 | Standard Methods for Gas Flow Resistance Testing of Filtration Media |
| ASTM E 1367 : 2003 : R2008 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates |
| ASTM B 579 : 1973 : R1999 | Standard Specification for Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate) |
| ASTM D 4463 : 1996 : R2001 | Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts |
| ASTM C 776 : 2017 : REDLINE | Standard Specification for Sintered Uranium Dioxide Pellets for Light Water Reactors |
| ASTM F 1015 : 2003 | Standard Test Method for Relative Abrasiveness of Synthetic Turf Playing Surfaces |
| ASTM C 1818 : 2015 | Standard Specification for Synthetic Fiber Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe |
| ASTM D 3472 : 1997 | Standard Test Method for Reverse-Ratchet Torque of Type IA Child-Resistant Closures |
| ASTM D 4481 : 2010 | Standard Test Method for Total Nickel in Fresh Alumina-Base Catalysts |
| ASTM D 2743 : 1968 : R1998 | Standard Practices for Uniformity of Traffic Paint Vehicle Solids by Spectroscopy and Gas Chromatography |
| ASTM C 985 : 2015 : REDLINE | SPECIFICATION FOR NONREINFORCED CONCRETE SPECIFIED STRENGTH CULVERT, STORM DRAIN, AND SEWER PIPE |
| ASTM D 3730 : 2017 : REDLINE | Standard Guide for Testing High-Performance Interior Architectural Wall Coatings |
| ASTM D 4463/D4463M : 1996 : R2013 : EDT 1 | Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts |
| ASCE 30 00 : 2000 | GUIDELINE FOR CONDITION ASSESSMENT OF THE BUILDING ENVELOPE |
| ASTM D 2743 : 1968 : R2010 | Standard Practices for Uniformity of Traffic Paint Vehicle Solids by Spectroscopy and Gas Chromatography (Withdrawn 2015) |
| ASTM C 1065 : 2008 | Standard Specification for Nuclear-Grade Zirconium Oxide Powder |
| ASTM D 1596 : 2014 : REDLINE | Standard Test Method for Dynamic Shock Cushioning Characteristics of Packaging Material |
| ASTM C 1334 : 2005 : R2010 | Standard Specification for Uranium Oxides with a <sup>235</sup>U Content of Less Than 5 % for Dissolution Prior to Conversion to Nuclear-Grade Uranium Dioxide |
| ASTM D 7390 : 2007 | Standard Guide for Evaluating Asbestos in Dust on Surfaces by Comparison Between Two Environments |
| ASTM F 1631 : 1995 | Standard Test Method for Impact Attenuation Properties of Body Padding and Protective Wear for the Sport of Fencing (Withdrawn 2003) |
| ASTM C 1862 : 2017 | Standard Test Method for the Nominal Joint Strength of End-Plug Joints in Advanced Ceramic Tubes at Ambient and Elevated Temperatures |
| ASTM D 2221 : 2001 : R2015 | Standard Test Method for Creep Properties of Package Cushioning Materials |
| ASTM D 1933 : 2003 : R2008 | Standard Specification for Nitrogen Gas as an Electrical Insulating Material |
| ASTM E 456 : 2013 : REV A : EDT 1 | Standard Terminology Relating to Quality and Statistics |
| ASTM C 823 : 2000 | Standard Practice for Examination and Sampling of Hardened Concrete in Constructions |
| ASTM F 1819 : 2007 | Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood Using a Mechanical Pressure Technique |
| ASTM D 5644 : 2001 | Standard Test Methods for Rubber Compounding Materials—Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber |
| ASTM F 778 : 1988 : R2007 | Standard Methods for Gas Flow Resistance Testing of Filtration Media |
| ASTM E 688 : 1994 : R2006 | Standard Test Methods for Waste Glass as a Raw Material for Glass Manufacturing |
| ASTM C 684 : 1999 | Standard Test Method for Making, Accelerated Curing, and Testing Concrete Compression Test Specimens |
| ASTM D 345 : 2002 | Side bearings of the freight wagon bogies. General specifications |
| ASTM D 7707 : 2011 : R2016 | Standard Specification for Wipe Sampling Materials for Beryllium in Surface Dust |
| ASTM D 3198 : 1997 | Standard Test Method for Application and Removal Torque of Threaded or Lug-Style Closures |
| ASTM E 1706 : 2005 : R2010 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates (Withdrawn 2019) |
| API 3000 : 2014 | CLASSIFYING AND LOADING OF CRUDE OIL INTO RAIL TANK CARS |
| ASTM D 5603 : 2001 | Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Particulate Rubber |
| ASTM D 3637 : 1984 : R1991 | Standard Test Methods for Permeability of Bituminous Mixtures (Withdrawn 1998) |
| ASTM F 1015 : 2003 : R2017 | Standard Test Method for Relative Abrasiveness of Synthetic Turf Playing Surfaces |
| ASTM D 3469 : 1997 : R2002 | Standard Test Methods for Measurement of Vertical Downward Forces to Disengage Type IIA Lug-Style Child-Resistant Closures |
| ASTM D 2221 : 2001 | Standard Test Method for Creep Properties of Package Cushioning Materials |
| ASTM E 456 : 2013 : REV A : EDT 4 | Standard Terminology Relating to Quality and Statistics |
| NACE RP 02 90 : 0 | IMPRESSED CURRENT CATHODIC PROTECTION OF REINFORCING STEEL IN ATMOSPHERICALLY EXPOSED CONCRETE STRUCTURES |
| ASTM D 3481 : 2006 : R2011 | Standard Test Method for Manual Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions (Withdrawn 2018) |
| ASTM D 245 : 2006 | Standard Practice for Establishing Structural Grades and Related Allowable Properties for Visually Graded Lumber |
| ASTM E 1706 : 2005 : EDT 1 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates |
| ASTM D 979/D979M : 2015 : REDLINE | Standard Practice for Sampling Bituminous Paving Mixtures |
| ASTM C 750 : 2009 : R2014 | Standard Specification for Nuclear-Grade Boron Carbide Powder |
| ASTM C 922 : 2014 : REDLINE | Standard Specification for Sintered Gadolinium Oxide-Uranium Dioxide Pellets |
| ASTM D 3323 : 1980 : R1988 : EDT 1 | Guide for Testing Interior Solvent-Thinned Flat Wall Paints (Withdrawn 1993) |
| ASTM C 823/C823M : 2012 : R2017 | Standard Practice for Examination and Sampling of Hardened<brk/> Concrete in Constructions |
| ASTM D 4271 : 1988 : R1994 | Standard Practice for Writing Statements on Sampling in Test Methods for Textiles |
| ASTM D 4203 : 2017 : REDLINE | Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials |
| ASTM F 778 : 1988 : R1993 | Standard Methods for Gas Flow Resistance Testing of Filtration Media |
| ASTM D 3472 : 1997 : R2002 | Standard Test Method for Reverse-Ratchet Torque of Type IA Child-Resistant Closures |
| ASTM D 3469 : 1997 : R2007 | Standard Test Methods for Measurement of Vertical Downward Forces to Disengage Type IIA Lug-Style Child-Resistant Closures (Withdrawn 2016) |
| ASTM F 1862/F1862M : 2017 : REDLINE | Standard Test Method for Resistance of Medical Face Masks to Penetration by Synthetic Blood (Horizontal Projection of Fixed Volume at a Known Velocity) |
| ASTM C 1334 : 2005 : EDT 1 | Standard Specification for Uranium Oxides with a <sup>235</sup>U Content of Less Than 5 % for Dissolution Prior to Conversion to Nuclear-Grade Uranium Dioxide |
| ASTM C 784 : 2016 : REDLINE | Standard Specification for Nuclear-Grade Aluminum Oxide-Boron Carbide Composite Pellets |
| ASTM D 7390 : 2007 : R2012 | Standard Guide for Evaluating Asbestos in Dust on Surfaces by Comparison Between Two Environments |
| ASTM C 1092 : 1994 | Specification for Glass Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe (Withdrawn 1995) |
| ASTM C 833 : 2017 : REDLINE | Standard Specification for Sintered (Uranium-Plutonium) Dioxide Pellets for Light Water Reactors |
| ASTM C 1076 : 2009 | Standard Specification for Nuclear Grade Hafnium Oxide Pellets |
| ASTM F 1407 : 2012 : R2017 | Standard Test Method for Resistance of Chemical Protective Clothing Materials to Liquid Permeation—Permeation Cup Method |
| ASTM C 1008 : 1999 : R2008 | Standard Specification for Sintered (Uranium-Plutonium) Dioxide<br> Pellets<span class='unicode'>—</span>Fast Reactor Fuel (Withdrawn 2014) |
| ASTM E 1908 : 2016 : REDLINE | Standard Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb) |
| ASTM D 1933 : 2003 | Standard Specification for Nitrogen Gas as an Electrical Insulating Material |
| ASTM D 4464 : 2015 : REDLINE | Standard Test Method for Particle Size Distribution of Catalytic Materials by Laser Light Scattering |
| ASTM F 1407 : 2012 | Standard Test Method for Resistance of Chemical Protective Clothing Materials to Liquid Permeation—Permeation Cup Method |
| ASTM D 3123 : 2009 | Standard Test Method for Spiral Flow of Low-Pressure Thermosetting Molding Compounds |
| ASTM C 752 : 20131 | Standard Specification for Nuclear-Grade Silver-Indium-Cadmium Alloy |
| ASTM E 688 : 1994 : R2011 | Standard Test Methods for Waste Glass as a Raw Material for Glass Manufacturing (Withdrawn 2019) |
| ASTM C 888 : 2003 : R2008 | Standard Specification for Nuclear-Grade Gadolinium Oxide (Gd<sub>2</sub>O<sub>3</sub>) Powder |
| ASTM D 2221 : 2001 : R2010 | Standard Test Method for Creep Properties of Package Cushioning Materials |
| ASTM D 5603 : 2001 : R2008 | Standard Classification for Rubber Compounding Materials<span class='unicode'>—</span>Recycled Vulcanizate Particulate Rubber |
| ASTM D 7964/D7964M : 2014 | Standard Test Method for Determining Activity of Fluid Catalytic Cracking (FCC) Catalysts in a Fluidized Bed |
| ASTM F 1015 : 2003 : R2009 | Standard Test Method for Relative Abrasiveness of Synthetic Turf Playing Surfaces |
| ASTM C 684 : 1999 : R2003 | Standard Test Method for Making, Accelerated Curing, and Testing Concrete Compression Test Specimens (Withdrawn 2012) |
| ASTM D 2940/D2940M : 2015 : REDLINE | Standard Specification for Graded Aggregate Material For Bases or Subbases for Highways or Airports |
| AASHTO R 38 : 2010 : R2013 | PRACTICE FOR QUALITY ASSURANCE OF STANDARD MANUFACTURED MATERIALS |
| ASTM E 1792 : 2003 : R2016 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
| ASTM F 1499 : 2017 : REDLINE | Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV) |
| ASTM D 6763 : 2016 : REDLINE | Standard Guide for Testing Exterior Wood Stains and Clear Water Repellents |
| ASTM C 1008 : 1999 | Standard Specification for Sintered (Uranium-Plutonium) Dioxide Pellets-Fast Reactor Fuel |
| ACI 228.1R : 2003 | IN-PLACE METHODS TO ESTIMATE CONCRETE STRENGTH |
| ASTM C 1031 : 2011 : R2016 | Standard Specification for Nuclear-Grade Aluminum Oxide Powder |
| ASTM D 6883 : 2017 : REDLINE | Standard Practice for Manual Sampling of Stationary Coal from Railroad Cars, Barges, Trucks, or Stockpiles |
| ASTM D 5603 : 2001 : R2015 | Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Particulate Rubber |
| ASCE/SEI 30 14 : 2014 | GUIDELINE FOR CONDITION ASSESSMENT OF THE BUILDING ENVELOPE |
| ASTM D 3968 : 1997 : R2007 | Standard Test Method for Monitoring of Rotational Torque of Type IIIA Child-Resistant Closures (Withdrawn 2016) |
| ASTM D 4481 : 2010 : R2015 | Standard Test Method for Total Nickel in Fresh Alumina-Base Catalysts |
| ASTM C 92 : 1995 | TEST METHODS FOR SIEVE ANALYSIS AND WATER CONTENT OF REFRACTORY MATERIALS |
| ASTM D 3283 : 1998 : R2012 | Standard Specification for Air as an Electrical Insulating Material |
| ASTM D 3469 : 1997 | Standard Test Methods for Measurement of Vertical Downward Forces to Disengage Type IIA Lug-Style Child-Resistant Closures |
| ASTM C 708 : 2016 : REDLINE | Standard Specification for Nuclear-Grade Beryllium Oxide Powder |
| ASTM C 802 : 2014 : REDLINE | Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials |
| ASTM D 2940 : 2003 | Standard Specification for Graded Aggregate Material For Bases or Subbases for Highways or Airports |
| ASTM E 1792 : 2003 : R2011 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
| ASTM D 75 : 2003 | Standard Practice for Sampling Aggregates |
| ASTM D 5324 : 2016 : REDLINE | Standard Guide for Testing Water-Borne Architectural Coatings |
| ASTM C 823/C823M : 2012 | Standard Practice for Examination and Sampling of Hardened<brk> Concrete in Constructions |
| GOST 849:2018 | Primary nickel. SpecificationsE |
| ASTM E 1706 : 2005 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates |
| ASTM E 456 : 2013 : REV A : EDT 2 | Standard Terminology Relating to Quality and Statistics |
| AASHTO R 42 : 2006 : R2011 | PRACTICE FOR DEVELOPING A QUALITY ASSURANCE PLAN FOR HOT MIX ASPHALT (HMA) |
| ASTM E 2548 : 2016 : REDLINE | Standard Guide for Sampling Seized Drugs for Qualitative and Quantitative Analysis (Withdrawn 2025) |
| ASTM D 3123 : 2009 : R2017 | Standard Test Method for Spiral Flow of Low-Pressure Thermosetting Molding Compounds |
| ASTM E 456 : 2013 : REV A : R2017 : EDT 1 | Standard Terminology Relating to Quality and Statistics |
| ASTM D 3472 : 1997 : R2007 | Standard Test Method for Reverse-Ratchet Torque of Type IA Child-Resistant Closures (Withdrawn 2016) |
| ASTM D 245 : 2006 : R2011 | Standard Practice for Establishing Structural Grades and Related Allowable Properties for Visually Graded Lumber |
| ASTM D 4463 : 1996 | Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts |
| ASTM C 750 : 2009 | Standard Specification for Nuclear-Grade Boron Carbide Powder |
| ASTM D 75/D75M : 2014 : REDLINE | Standard Practice for Sampling Aggregates |
| ASTM D 5536 : 2017 : REDLINE | Standard Practice for Sampling Forest Trees for Determination of Clear Wood Properties |
| ASTM D 2932 : 1980 : R1988 : EDT 1 | Guide for Testing Exterior Solvent-Based House and Trim Coatings (Withdrawn 1993) |
| ASTM C 1868 : 2018 | Standard Practice for Ceramographic Preparation of UO<inf>2</inf> and Mixed Oxide (U,Pu)O<inf>2</inf> Pellets for Microstructural Analysis |
| ASTM D 7707 :2011 | Standard Specification for Wipe Sampling Materials for Beryllium in Surface Dust |
| ASTM D 3481 : 2006 | Standard Test Method for Manual Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions |
| ASTM D 2743 : 1968 : R2004 | Standard Practices for Uniformity of Traffic Paint Vehicle Solids by Spectroscopy and Gas Chromatography |
| ASTM D 5644 : 2001 : R2008 : EDT 1 | Standard Test Methods for Rubber Compounding Materials Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber |
| ASTM C 888 : 2003 | Standard Specification for Nuclear-Grade Gadolinium Oxide (Gd<sub>2</sub>O<sub>3</sub>) Powder |
| ASTM E 1792 : 2003 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
| ASTM D 3665 : 2012 | Standard Practice for Random Sampling of Construction Materials |
| ASTM C 1066 : 2009 : R2015 | Standard Specification for Nuclear Grade Zirconium Oxide Pellets |
| ASTM C 1334 : 2005 : R2016 : EDT 1 | Standard Specification for Uranium Oxides with a <sup>235</sup>U Content of Less Than 5 % for Dissolution Prior to Conversion to Nuclear-Grade Uranium Dioxide |
| ASTM D 3283 : 1998 | Standard Specification for Air as an Electrical Insulating Material |
| ASTM D 3968 : 1997 | Standard Test Method for Monitoring of Rotational Torque of Type IIIA Child-Resistant Closures |
| ASTM D 4463/D4463M : 1996 : R2012 : EDT 1 | Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts |
| ASTM D 5644 : 2001 : R2008 | Standard Test Methods for Rubber Compounding Materials Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber |
| ASTM B 579 : 1973 : R2009 | Standard Specification for Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate) |
| ASTM D 2915 : 2017 : REDLINE | Standard Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products |
| ASTM C 785 : 2008 : R2015 | Standard Specification for Nuclear-Grade Aluminum Oxide Pellets |
| ASTM D 7257 : 2006 | Standard Test Method for Automated Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions |
| ASTM D 3968 : 1997 : R2002 | Standard Test Method for Monitoring of Rotational Torque of Type IIIA Child-Resistant Closures |
| ASTM E 122 : 2017 : REDLINE | Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process |
Summarise
£50.78
Excluding VAT
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.