• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM E 2215 : 2019

Current

Current

The latest, up-to-date edition.

Standard Practice for Evaluation of Surveillance Capsules from Light-Water Moderated Nuclear Power Reactor Vessels

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-06-2019

This practice covers the evaluation of test specimens and dosimetry from light water moderated nuclear power reactor pressure vessel surveillance capsules.

1.1This practice covers the evaluation of test specimens and dosimetry from light water moderated nuclear power reactor pressure vessel surveillance capsules.

1.2Additionally, this practice provides guidance on reassessing withdrawal schedule for design life and operation beyond design life.

1.3This practice is one of a series of standard practices that outline the surveillance program required for nuclear reactor pressure vessels. The surveillance program monitors the irradiation-induced changes in the ferritic steels that comprise the beltline of a light-water moderated nuclear reactor pressure vessel.

1.4This practice along with its companion surveillance program practice, Practice E185, is intended for application in monitoring the properties of beltline materials in any light-water moderated nuclear reactor.2

1.5Modifications to the standard test program and supplemental tests are described in Guide E636.

1.6The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.7This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
E 10
DocumentType
Standard Practice
Pages
9
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

ASTM E 853 : 2018 Standard Practice for Analysis and Interpretation of Light-Water Reactor Surveillance Neutron Exposure Results
ASTM E 185 : 2016 Standard Practice for Design of Surveillance Programs for Light-Water Moderated Nuclear Power Reactor Vessels
ASTM E 1253 : 2013 Standard Guide for Reconstitution of Irradiated Charpy-Sized Specimens
ASTM E 1214 : 2011 : R2018 Standard Guide for Use of Melt Wire Temperature Monitors for Reactor Vessel Surveillance
ASTM E 509/E509M : 2014 Standard Guide for In-Service Annealing of Light-Water Moderated Nuclear Reactor Vessels
ASTM E 636 : 2014 : EDT 1 Standard Guide for Conducting Supplemental Surveillance Tests for Nuclear Power Reactor Vessels
ASTM E 706 : 2016 Standard Master Matrix for Light-Water Reactor Pressure Vessel Surveillance Standards
ASTM E 531 : 2013 Standard Practice for Surveillance Testing of High-Temperature Nuclear Component Materials (Withdrawn 2022)
ASTM E 900 : 2015 : EDT 1 Standard Guide for Predicting Radiation-Induced Transition Temperature Shift in Reactor Vessel Materials
ASTM E 2956 : 2014 Standard Guide for Monitoring the Neutron Exposure of LWR Reactor Pressure Vessels

ASTM E 1921 : 2009 : REV B Standard Test Method for Determination of Reference Temperature, <span class="bdit">T<sub>o</sub></span>, for Ferritic Steels in the Transition Range
ASTM E 1921 : 2009 : REV C Standard Test Method for Determination of Reference Temperature, <span class="bdit">T<sub>o</sub></span>, for Ferritic Steels in the Transition Range
ASTM E 1253 : 2007 Standard Guide for Reconstitution of Irradiated Charpy-Sized Specimens
ASTM E 1820 : 2013 Standard Test Method for Measurement of Fracture Toughness
ASTM E 1820 : 2009 : EDT 1 Standard Test Method for Measurement of Fracture Toughness
ASTM E 1820 : 2023 : REV B Standard Test Method for Measurement of Fracture Toughness
ASTM A 370 : 2021 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM E 1921 : 2008 Standard Test Method for Determination of Reference Temperature, <span class="bdit">T<sub>o</sub></span>, for Ferritic Steels in the Transition Range
ASTM E 185 : 1998 Standard Practice for Conducting Surveillance Tests for Light-Water Cooled Nuclear Power Reactor Vessels, E706 (IF)
ASTM E 693 : 2023 Standard Practice for Characterizing Neutron Exposures in Iron and Low Alloy Steels in Terms of Displacements Per Atom (DPA)
ASTM E 8/E8M : 2024 Standard Test Methods for Tension Testing of Metallic Materials
ASTM E 23 : 2024 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
ASTM E 1921 : 2005 Standard Test Method for Determination of Reference Temperature, <i>T<sub>o'</sub></i>, for Ferritic Steels in the Transition Range
ASTM E 8/E8M : 2016 : REV A : EDT 1 Standard Test Methods for Tension Testing of Metallic Materials
ASTM E 1921 : 2017 : REV A Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range
ASTM E 1820 : 2021 Standard Test Method for Measurement of Fracture Toughness
ASTM E 1921 : 2008 : REV A : EDT 1 Standard Test Method for Determination of Reference Temperature, <span class="bdit">T<sub>o</sub></span>, for Ferritic Steels in the Transition Range
ASTM E 693 : 2017 Standard Practice for Characterizing Neutron Exposures in Iron and Low Alloy Steels in Terms of Displacements Per Atom (DPA)
ASTM E 1820 : 2011 : EDT 2 Standard Test Method for Measurement of Fracture Toughness
ASTM E 8/E8M : 2021 Standard Test Methods for Tension Testing of Metallic Materials
ASTM E 1820 : 2020 Standard Test Method for Measurement of Fracture Toughness
ASTM E 23 : 2022 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
ASTM E 1253 : 2021 Standard Guide for Reconstitution of Charpy-Sized Specimens
ASTM E 21 : 2020 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
ASTM E 1921 : 2011 : REV A Standard Test Method for Determination of Reference Temperature, <span class="bdit">T<sub>o</sub></span>, for Ferritic Steels in the Transition Range
ASTM E 1921 : 2017 Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range
ASTM E 1820 : 2011 : EDT 1 Standard Test Method for Measurement of Fracture Toughness
ASTM E 1921 : 2016 Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range
ASTM E 1820 : 2006 Standard Test Method for Measurement of Fracture Toughness
ASTM E 1820 : 2018 Standard Test Method for Measurement of Fracture Toughness
ASTM E 1820 : 2011 Standard Test Method for Measurement of Fracture Toughness
ASTM E 900 : 2015 : EDT 2 Standard Guide for Predicting Radiation-Induced Transition Temperature Shift in Reactor Vessel Materials
ASTM E 1214 : 2011 : R2018 Standard Guide for Use of Melt Wire Temperature Monitors for Reactor Vessel Surveillance
ASTM E 1921 : 2021 : REV A Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >0</inf></emph>, for Ferritic Steels in the Transition Range
ASTM E 1214 : 2006 Standard Guide for Use of Melt Wire Temperature Monitors for Reactor Vessel Surveillance, E 706 (IIIE)
ASTM E 1820 : 2008 : REV A Standard Test Method for Measurement of Fracture Toughness
ASTM E 1214 : 1987 : R2000 Standard Guide for Use of Melt Wire Temperature Monitors for Reactor Vessel Surveillance, E706(IIIE)
ASTM E 1921 : 2009 : REV C : EDT 1 Standard Test Method for Determination of Reference Temperature, <span class="bdit">T<sub>o</sub></span>, for Ferritic Steels in the Transition Range
ASTM E 1921 : 2023 : REV B Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >0</inf></emph>, for Ferritic Steels in the Transition Range
ASTM E 1921 : 2008 : REV A Standard Test Method for Determination of Reference Temperature, <span class="bdit">T<sub>o</sub></span>, for Ferritic Steels in the Transition Range
ASTM E 170 : 2020 Standard Terminology Relating to Radiation Measurements and Dosimetry
ASTM E 1921 : 2013 : REV A Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range
ASTM E 23 : 2023 : REV A Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
ASTM E 1921 : 2015 : REV A : EDT 1 Standard Test Method for Determination of Reference Temperature, T<inf>o</inf>, for Ferritic Steels in the Transition Range
ASTM E 1820 : 2017 Standard Test Method for Measurement of Fracture Toughness
ASTM E 1921 : 2019 : REV B Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range
ASTM E 1820 : 2020 : EDT 1 Standard Test Method for Measurement of Fracture Toughness
ASTM E 1921 : 1997 Standard Test Method for Determination of Reference Temperature, T<sub>o</sub>, for Ferritic Steels in the Transition Range
ASTM E 1921 : 2007 Standard Test Method for Determination of Reference Temperature, <span class="bdit">T<sub>o</sub></span>, for Ferritic Steels in the Transition Range
ASTM A 370 : 2020 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM E 8/E8M : 2022 Standard Test Methods for Tension Testing of Metallic Materials
ASTM E 1214 : 2011 : R2023 Standard Guide for Use of Melt Wire Temperature Monitors for Reactor Vessel Surveillance
ASTM E 1921 : 2014 : REV A Standard Test Method for Determination of Reference Temperature, T<inf>o</inf>, for Ferritic Steels in the Transition Range
ASTM E 1820 : 2017 : REV A Standard Test Method for Measurement of Fracture Toughness
ASTM E 170 : 2023 Standard Terminology Relating to Radiation Measurements and Dosimetry
ASTM E 853 : 2023 Standard Practice for Analysis and Interpretation of Light-Water Reactor Surveillance Neutron Exposure Results
ASTM E 1820 : 2005 Standard Test Method for Measurement of Fracture Toughness
ASTM A 370 : 2023 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM E 1820 : 2022 : EDT 1 Standard Test Method for Measurement of Fracture Toughness
ASTM E 23 : 2018 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
ASTM E 1253 : 1999 Standard Guide for Reconstitution of Irradiated Charpy-Sized Specimens
ASTM E 23 : 2002 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
ASTM E 1820 : 2015 Standard Test Method for Measurement of Fracture Toughness
ASTM E 1921 : 2015 : REV A Standard Test Method for Determination of Reference Temperature, T<inf>o</inf>, for Ferritic Steels in the Transition Range
ASTM E 1820 : 2020 : REV B Standard Test Method for Measurement of Fracture Toughness
ASTM E 1820 : 2018 : REV A : EDT 1 Standard Test Method for Measurement of Fracture Toughness
ASTM E 1820 : 2020 : REV A Standard Test Method for Measurement of Fracture Toughness
ASTM E 1921 : 2019 Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range
ASTM E 1921 : 2009 : REV A Standard Test Method for Determination of Reference Temperature, <span class="bdit">T<sub>o</sub></span>, for Ferritic Steels in the Transition Range
ASTM E 1921 : 2018 : REV A Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range
ASTM E 1921 : 2011 Standard Test Method for Determination of Reference Temperature, <span class="bdit">T<sub>o</sub></span>, for Ferritic Steels in the Transition Range
ASTM E 208 : 2020 : EDT 1 Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels
ASTM E 1921 : 2022 Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >0</inf></emph>, for Ferritic Steels in the Transition Range
ASTM E 1921 : 2013 Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range
ASTM E 1921 : 2012 : REV A Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range
ASTM E 1820 : 2006 : EDT 1 Standard Test Method for Measurement of Fracture Toughness
ASTM E 23 : 2023 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
ASTM E 1214 : 2011 : EDT 1 Standard Guide for Use of Melt Wire Temperature Monitors for Reactor Vessel Surveillance
ASTM E 1820 : 2023 Standard Test Method for Measurement of Fracture Toughness
ASTM A 370 : 2011 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM E 1253 : 2013 Standard Guide for Reconstitution of Irradiated Charpy-Sized Specimens
ASTM E 1921 : 2014 Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range
ASTM E 1214 : 2011 Standard Guide for Use of Melt Wire Temperature Monitors for Reactor Vessel Surveillance, E 706 (IIIE)
ASTM E 1921 : 2019 : REV A Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range
ASTM E 1921 : 2023 : REV A Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >0</inf></emph>, for Ferritic Steels in the Transition Range
ASTM E 1921 : 2018 Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range
ASTM E 1820 : 2015 : REV A : EDT 1 Standard Test Method for Measurement of Fracture Toughness
ASTM E 1820 : 2018 : REV A Standard Test Method for Measurement of Fracture Toughness
ASTM E 900 : 2021 Standard Guide for Predicting Radiation-Induced Transition Temperature Shift in Reactor Vessel Materials
ASTM A 370 : 2022 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM E 1921 : 2021 Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range
ASTM E 1921 : 2023 Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >0</inf></emph>, for Ferritic Steels in the Transition Range
ASTM E 1921 : 2009 : REV C : EDT 2 Standard Test Method for Determination of Reference Temperature, <span class="bdit">T<sub>o</sub></span>, for Ferritic Steels in the Transition Range
ASTM E 1820 : 2016 Standard Test Method for Measurement of Fracture Toughness
ASTM E 1921 : 2020 Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range
ASTM E 1921 : 2002 Standard Test Method for Determination of Reference Temperature, T<sub>o</sub>, for Ferritic Steels in the Transition Range
ASTM E 1921 : 2012 Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf>o</inf></emph>, for Ferritic Steels in the Transition Range
ASTM E 208 : 2020 Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels
ASTM E 1921 : 2022 : REV A Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >0</inf></emph>, for Ferritic Steels in the Transition Range
ASTM E 185 : 2021 Standard Practice for Design of Surveillance Programs for Light-Water Moderated Nuclear Power Reactor Vessels
ASTM E 1820 : 1999 : REV A Standard Test Method for Measurement of Fracture Toughness
ASTM E 1820 : 2001 Standard Test Method for Measurement of Fracture Toughness
ASTM E 1820 : 2013 : EDT 1 Standard Test Method for Measurement of Fracture Toughness
ASTM E 1820 : 2015 : REV A Standard Test Method for Measurement of Fracture Toughness
ASTM E 1820 : 2022 Standard Test Method for Measurement of Fracture Toughness
ASTM E 1820 : 2009 Standard Test Method for Measurement of Fracture Toughness
ASTM E 1820 : 2005 : REV A Standard Test Method for Measurement of Fracture Toughness
ASTM E 1921 : 2003 Standard Test Method for Determination of Reference Temperature, <i>T<sub>o'</sub></i>, for Ferritic Steels in the Transition Range
ASTM A 370 : 2024 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM E 1921 : 2015 Standard Test Method for Determination of Reference Temperature, T<inf>o</inf>, for Ferritic Steels in the Transition Range
ASTM E 1921 : 2010 : EDT 1 Standard Test Method for Determination of Reference Temperature, <span class="bdit">T<sub>o</sub></span>, for Ferritic Steels in the Transition Range
ASTM E 1820 : 2023 : REV A Standard Test Method for Measurement of Fracture Toughness

View more information
£53.79
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.