• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM E 2352 : 2019

Current
Current

The latest, up-to-date edition.

Standard Practice for Aerospace Cleanrooms and Associated Controlled Environments—Cleanroom Operations
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-05-2019

This practice specifies basic requirements, procedures, and practices for operating aerospace cleanrooms and controlled environments and precautions associated with the facility and equipment used.

1.1This practice specifies basic requirements, procedures, and practices for operating aerospace cleanrooms and controlled environments and precautions associated with the facility and equipment used.

1.2This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
E 21
DocumentType
Standard Practice
Pages
14
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

ASTM E 2042/E2042M : 2009 : R2016 Standard Practice for Cleaning and Maintaining Controlled Areas and Clean Rooms

IEC 61025:2006 Fault tree analysis (FTA)
ASTM E 1560 : 2011 : EDT 1 Standard Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers
ASTM E 1235 : 1995 : EDT 1 Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft
ASTM E 1559 : 2009 : R2022 Standard Test Method for Contamination Outgassing Characteristics of Spacecraft Materials
ASTM D 737 : 2018 : R2023 Standard Test Method for Air Permeability of Textile Fabrics
ASTM E 2217 : 2002 Standard Practice for Design and Construction of Aerospace Cleanrooms and Contamination Controlled Areas
ASTM E 1234 : 2012 : R2020 Standard Practice for Handling, Transporting, and Installing Nonvolatile Residue (NVR) Sample Plates Used in Environmentally Controlled Areas for Spacecraft
ASTM E 2088 : 2000 Standard Practice for Selecting, Preparing, Exposing, and Analyzing Witness Surfaces for Measuring Particle Deposition in Cleanrooms and Associated Controlled Environments
ASTM F 318 : 2006 Standard Practice for Sampling Airborne Particulate Contamination in Cleanrooms for Handling Aerospace Fluids
ASTM E 2217 : 2012 : REDLINE Standard Practice for Design and Construction of Aerospace Cleanrooms and Contamination Controlled Areas
ASTM E 2088 : 2006 : R2021 Standard Practice for Selecting, Preparing, Exposing, and Analyzing Witness Surfaces for Measuring Particle Deposition in Cleanrooms and Associated Controlled Environments
ASTM E 1234 : 1995 : EDT 1 Standard Practice for Handling, Transporting, and Installing Nonvolatile Residue (NVR) Sample Plates Used in Environmentally Controlled Areas for Spacecraft
IEC 60812:2006 Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA)
ASTM E 1549 : 1995 : R2000 : EDT 1 Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations
ISO 9237:1995 Textiles — Determination of the permeability of fabrics to air
NASA STD 6001 : 2011 FLAMMABILITY, OFFGASSING, AND COMPATIBILITY REQUIREMENTS AND TEST PROCEDURES
ASTM E 595 : 2015 Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment
IEST RP CC016.2 : 2002(R2006) THE RATE OF DEPOSITION OF NONVOLATILE RESIDUE IN CLEANROOMS
ASTM E 1731 : 1995 : R2001 Standard Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves
ASTM E 1731 : 2011 : R2018 Standard Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves
ASTM E 1559 : 2009 : R2016 Standard Test Method for Contamination Outgassing Characteristics of Spacecraft Materials
ISO 14644-2:2015 Cleanrooms and associated controlled environments Part 2: Monitoring to provide evidence of cleanroom performance related to air cleanliness by particle concentration
ASTM E 1731 : 2006 Standard Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves
ASTM E 1235 : 2012 Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft
EN 1149-1:2006 Protective clothing - Electrostatic properties - Part 1: Test method for measurement of surface resistivity
ASTM E 1216 : 1999 Standard Practice for Sampling for Particulate Contamination by Tape Lift
ASTM E 595 : 2015 : REDLINE Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment
ASTM E 1560 : 2011 Standard Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers
ASTM E 1549 : 2006 Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations
ASTM E 2042 : 1999 Standard Practice for Cleaning and Maintaining Controlled Areas and Clean Rooms
FED-STD-209 Revision E:1992 AIRBORNE PARTICULATE CLEANLINESS CLASSES IN CLEANROOMS AND CLEAN ZONES
ASTM E 1731 : 1995 : EDT 1 Standard Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves
ASTM E 1234 : 2012 Standard Practice for Handling, Transporting, and Installing Nonvolatile Residue (NVR) Sample Plates Used in Environmentally Controlled Areas for Spacecraft
ASTM E 2088 : 2006 : R2015 Standard Practice for Selecting, Preparing, Exposing, and Analyzing Witness Surfaces for Measuring Particle Deposition in Cleanrooms and Associated Controlled Environments
ASTM E 1560 : 2006 Standard Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers
ASTM D 737 : 2018 Standard Test Method for Air Permeability of Textile Fabrics
IEST RP CC022.2 : 2004(R2008) ELECTROSTATIC CHARGE IN CLEANROOMS AND OTHER CONTROLLED ENVIRONMENTS
ASTM E 1216 : 2021 Standard Practice for Sampling for Particulate Contamination by Tape Lift
ASTM E 1235 : 2001 Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft
ASTM E 595 : 2015 : R2021 Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment
ASTM E 1235 : 2012 : R2020 : EDT 1 Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft
ASTM E 2217 : 2002 : R2007 Standard Practice for Design and Construction of Aerospace Cleanrooms and Contamination Controlled Areas
ASTM E 2088 : 2006 : R2011 Standard Practice for Selecting, Preparing, Exposing, and Analyzing Witness Surfaces for Measuring Particle Deposition in Cleanrooms and Associated Controlled Environments
ASTM E 1234 : 2001 Standard Practice for Handling, Transporting, and Installing Nonvolatile Residue (NVR) Sample Plates Used in Environmentally Controlled Areas for Spacecraft
ASTM E 1559 : 2000 Standard Test Method for Contamination Outgassing Characteristics of Spacecraft Materials
ASTM E 1235 : 2012 : REDLINE Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft
ASTM E 1560 : 2018 Standard Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers
ASTM E 1216 : 2011 Standard Practice for Sampling for Particulate Contamination by Tape Lift
ASTM E 1235 : 2012 : R2020 Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft
ASTM E 1216 : 2006 Standard Practice for Sampling for Particulate Contamination by Tape Lift
ASTM E 1216 : 2011 : R2016 Standard Practice for Sampling for Particulate Contamination by Tape Lift
ISO 11092:2014 Textiles — Physiological effects — Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test)
ISO 14644-1:2015 Cleanrooms and associated controlled environments Part 1: Classification of air cleanliness by particle concentration
ASTM F 50 : 2012 : R2015 Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles
ASTM E 1235 : 2008 Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft
ISO 7730:2005 Ergonomics of the thermal environment — Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
ASTM E 2217 : 2012 : R2019 Standard Practice for Design and Construction of Aerospace Cleanrooms and Contamination Controlled Areas
ASTM E 1559 : 2009 Standard Test Method for Contamination Outgassing Characteristics of Spacecraft Materials
ISO 14644-4:2001 Cleanrooms and associated controlled environments — Part 4: Design, construction and start-up
ASTM E 1560 : 1995 : R2001 Standard Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers
ASTM E 1731 : 2011 Standard Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves
ASTM E 2042 : 2004 Standard Practice for Cleaning and Maintaining Controlled Areas and Clean Rooms
ASTM E 1216 : 1999 : R2005 Standard Practice for Sampling for Particulate Contamination by Tape Lift
ASTM E 1559 : 2003 Standard Test Method for Contamination Outgassing Characteristics of Spacecraft Materials
ASTM F 25 : 2004 Standard Test Method for Sizing and Counting Airborne Particulate Contamination in Cleanrooms and Other Dust-Controlled Areas
IEST RP CC026.1 : 1995 CLEANROOM OPERATIONS
ASTM F 50 : 2021 Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles
ASTM E 1234 : 2007 Standard Practice for Handling, Transporting, and Installing Nonvolatile Residue (NVR) Sample Plates Used in Environmentally Controlled Areas for Spacecraft
ASTM E 1560 : 1995 : EDT 1 Standard Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers
ASTM E 2217 : 2012 Standard Practice for Design and Construction of Aerospace Cleanrooms and Contamination Controlled Areas
ASTM E 2088 : 2006 Standard Practice for Selecting, Preparing, Exposing, and Analyzing Witness Surfaces for Measuring Particle Deposition in Cleanrooms and Associated Controlled Environments
ASTM E 1234 : 2012 : REDLINE Standard Practice for Handling, Transporting, and Installing Nonvolatile Residue (NVR) Sample Plates Used in Environmentally Controlled Areas for Spacecraft
ASTM D 737 : 2004 Test Method for Air Permeability of Textile Fabrics

View more information
£57.60
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.