• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM E 50 : 2017 : REDLINE

Current
Current

The latest, up-to-date edition.

Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials
Available format(s)

PDF

Language(s)

English

Published date

01-09-2017

CONTAINED IN VOL. 03.05, 2017 Describes laboratory apparatus and reagents that are required for the chemical analysis of metals, ores and related materials by standard methods of ASTM.

1.1These practices cover laboratory apparatus and reagents that are required for the chemical analysis of metals, ores and related materials by standard methods of ASTM. Detailed descriptions of recommended apparatus and detailed instructions for the preparation of standard solutions and certain nonstandardized reagents will be found listed or specified in the individual methods of analysis. Included here are general recommendations on the purity of reagents and protective measures for the use of hazardous reagents.

1.2These recommendations are intended to apply to the ASTM methods of chemical analysis of metals when definite reference is made to these practices, as covered in Section 4.

1.3The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific hazards are given in Section 8.

Note 1:The use of the verb “shall” (with its obligatory third person meaning) in this standard has been confined to those aspects of laboratory safety where regulatory requirements are known to exist. Such regulations, however, are beyond the scope of these practices.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
E 01
DocumentType
Redline
Pages
13
PublisherName
American Society for Testing and Materials
Status
Current

ASTM E 1587 : 2017 : REDLINE Standard Test Methods for Chemical Analysis of Refined Nickel
ASTM E 1835 : 2014 : REDLINE Standard Test Method for Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry
ASTM A 309 : 2001 : R2012 Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test (Withdrawn 2015)
ASTM E 2296 : 2003 Standard Practice for Silver Corrections in Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Fire Assay Slag Recycling and Cupel Proof Gravimetry
ASTM C 1271 : 1999 : R2012 Standard Test Method for X-ray Spectrometric Analysis of Lime and Limestone
ASTM E 53 : 2007 Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry
ASTM E 508 : 2013 : REDLINE Standard Test Method for Determination of Calcium and Magnesium in Iron Ores by Flame Atomic Absorption Spectrometry
ASTM A 922 : 2005 : R2015 Standard Specification for Silicon Metal
ASTM C 458 : 1998 : R2002 Standard Test Method for Organic Fiber Content of Asbestos-Cement Products
ASTM E 118 : 1989 : R2004 Standard Test Methods for Chemical Analysis of Copper-Chromium Alloys (Withdrawn 2010)
ASTM B 712 : 1993 : R2012 Standard Guide for Determination of Sodium and Potassium Content For Silver-Cadmium Oxide Contact Materials (Withdrawn 2015)
ASTM B 712 : 1993 : R1999 Standard Guide for Determination of Sodium and Potassium Content For Silver-Cadmium Oxide Contact Materials
ASTM C 1271 : 1999 : R2006 Standard Test Method for X-ray Spectrometric Analysis of Lime and Limestone
ASTM E 536 : 2016 : REDLINE Standard Test Methods for Chemical Analysis of Zinc and Zinc Alloys
ASTM E 1834 : 2011 Standard Test Method for Analysis of Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry
ASTM B 170 : 1999 : R2015 Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes
ASTM E 396 : 2017 : REDLINE Standard Test Methods for Chemical Analysis of Cadmium
ASTM E 1097 : 2012 : R2017 Standard Guide for Determination of Various Elements by Direct Current Plasma Atomic Emission Spectrometry
ASTM E 1568 : 2013 : REDLINE Standard Test Method for Determination of Gold in Activated Carbon by Fire Assay Gravimetry
ASTM E 1805 : 2013 : REDLINE Standard Test Method for Determination of Gold in Copper Concentrates by Fire Assay Gravimetry
ASTM E 315 : 2004 Standard Test Methods for Chemical Analysis of Molybdenum (Withdrawn 2010)
ASTM E 2050 : 2017 : REDLINE Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion
ASTM E 314 : 2016 : REDLINE Standard Test Methods for Determination of Manganese in Iron Ores by Pyrophosphate Potentiometry and Periodate Spectrophotometry Techniques
ASTM E 362 : 1999 Standard Test Methods for the Determination of Arsenic and Lead in Silicomanganese and Ferrosilicon Manganese (Withdrawn 2005)
ASTM E 2575 : 2008 Standard Test Method for Determination of Oxygen in Copper and Copper Alloys (Withdrawn 2017)
ASTM E 3061 : 2017 Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance Based Method)
ASTM E 400 : 2002 Standard Test Method for Analysis of Ores, Minerals, and Rocks by the Fire Assay Preconcentration Optical Emission Spectroscopy (Withdrawn 2007)
ASTM E 364 : 1994 : R2000 Standard Test Methods for Chemical Analysis of Ferrochrome-Silicon (Withdrawn 2006)
ASTM E 371 : 2000 Standard Test Method for the Determination of Boron in Ferroboron (Withdrawn 2006)
ASTM E 2972 : 2015 Standard Guide for Production, Testing, and Value Assignment of In-House Reference Materials for Metals, Ores, and Other Related Materials
ASTM E 1659 : 2012 : REDLINE Standard Test Methods for Coating Mass and Chemical Analysis of Zinc-Nickel Alloy Electrolytically Coated on Steel Sheet
ASTM E 194 : 2010 Standard Test Method for Acid-Insoluble Content of Copper and Iron Powders
ASTM E 416 : 1998 Standard Practice for Planning and Safe Operation of a Spectrochemical Laboratory
ASTM E 1937 : 2004 Standard Test Method for Determination of Nitrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique (Withdrawn 2005)
ASTM E 194 : 2010 : R2015 Standard Test Method for Acid-Insoluble Content of Copper and Iron Powders
ASTM E 2626 : 2008 Standard Guide for Spectrometric Analysis of Reactive and Refractory Metals
ASTM B 216 : 2016 : REDLINE Standard Specification for Tough-Pitch Fire-Refined Copper—Refinery Shapes
ASTM E 360 : 1996 : R2001 Standard Test Methods for Chemical Analysis of Silicon and Ferrosilicon (Withdrawn 2006)
ASTM B 298 : 2012 : R2017 Standard Specification for Silver-Coated Soft or Annealed Copper Wire
ASTM E 1452 : 1992 : R1996 Standard Practice for Preparation of Calibration Solutions for Spectrophotometric and for Spectroscopic Atomic Analysis (Withdrawn 2005)
ASTM E 2293 : 2003 Standard Practice for Drying of Metal Bearing Ores, Concentrates and Related Metallurgical Materials for the Determination of Mercury
ASTM E 2594 : 2009 Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Method)
ASTM E 2594 : 2009 : R2014 Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Method)
ASTM E 2371 : 2013 Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology)
ASTM B 604 : 1991 : R2015 Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics
ASTM C 816 : 2015 : REDLINE Standard Test Method for Sulfur Content in Graphite by Combustion-Iodometric Titration Method
ASTM E 1031 : 1996 Standard Test Method for Analysis of Iron-Making and Steel-Making Slags by X-Ray Spectrometry (Withdrawn 2002)
ASTM B 712 : 1993 : R2006 Standard Guide for Determination of Sodium and Potassium Content For Silver-Cadmium Oxide Contact Materials
ASTM E 1724 : 1995 Standard Guide for Testing and Certification of Metal and Metal-Related Reference Materials
ASTM E 31 : 1985 : R1989 Methods for Chemical Analysis of Ferroalloys (Withdrawn 1995)
ASTM B 604 : 1991 : R2008 Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics
ASTM E 352 : 2013-05 TEST METHODS FOR CHEMICAL ANALYSIS OF TOOL STEELS AND OTHER SIMILAR MEDIUM-AND HIGH-ALLOY STEELS
ASTM E 1898 : 2013 : REDLINE Standard Test Method for Determination of Silver in Copper Concentrates by Flame Atomic Absorption Spectrometry
ASTM B 928/B928M : 2015 : REDLINE Standard Specification for High Magnesium Aluminum-Alloy Products for Marine Service and Similar Environments
ASTM E 1277 : 2014 : REDLINE Standard Test Method for Analysis of Zinc-5 % Aluminum-Mischmetal Alloys by ICP Emission Spectrometry
ASTM C 458/C458M : 1998 : R2011 : EDT 1 Standard Test Method for Organic Fiber Content of Asbestos-Cement Products
ASTM B 170 : 1999 : R2004 Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes
ASTM E 1600 : 2015 : REDLINE Standard Test Methods for Determination of Gold in Cyanide Solutions
ASTM D 3610 : 2000 : R2004 Standard Test Method for Total Cobalt In Alumina-Base Cobalt-Molybdenum Catalyst by Potentiometric Titration Method
ASTM E 2294 : 2003 Standard Practice for Proof Silver Corrections in Metal Bearing Ores, Concentrates and Related Materials by Fire Assay Gravimetry
ASTM D 4042 : 1993 : R1998 Test Method for Sampling and Testing for Ash and Total Iron in Steel Mill Dispersions of Rolling Oils
ASTM E 2824 : 2011 Standard Test Method for Determination of Beryllium in Copper-Beryllium Alloys by Phosphate Gravimetric Method
ASTM E 1184 : 2010 Standard Practice for Determination of Elements by Graphite Furnace Atomic Absorption Spectrometry
ASTM E 1852 : 2013 : REDLINE Standard Test Method for Determination of Low Levels of Antimony in Carbon and Low-Alloy Steel by Graphite Furnace Atomic Absorption Spectrometry
ASTM B 298 : 2012 Standard Specification for Silver-Coated Soft or Annealed Copper Wire
ASTM E 1941 : 2010 Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis
ASTM E 121 : 1983 : R2004 Standard Test Methods for Chemical Analysis of Copper-Tellurium Alloys (Withdrawn 2010)
ASTM E 146 : 1983 Methods of Chemical Analysis of Zirconium and Zirconium Alloys (Silicon, Hydrogen, and Copper) (Withdrawn 1989)
ASTM E 2293 : 2003 : R2013 Standard Practice for Drying of Metal Bearing Ores, Concentrates, and Related Metallurgical Materials for the Determination of Mercury
ASTM E 106 : 1983 : R1996 Standard Test Methods for Chemical Analysis of Copper-Beryllium Alloys
ASTM E 361 : 1999 Standard Test Methods for the Determination of Arsenic and Lead in Ferromanganese (Withdrawn 2005)
ASTM B 170 :1999 Standard Specification for Oxygen-Free Electrolytic Copper Refinery Shapes
ASTM E 354 : 2014 : REDLINE Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys
ASTM E 316 : 2017 : REDLINE Standard Test Method for Determination of Iron in Manganese Ores by Hydrogen Sulfide Reduction-Dichromate Titrimetry
ASTM B 170 : 1999 : R2010 : EDT 1 Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes
ASTM D 3610 : 2000 Standard Test Method for Total Cobalt In Alumina-Base Cobalt-Molybdenum Catalyst by Potentiometric Titration Method
ASTM E 117 : 1964 : R1989 Method for Spectrographic Analysis of Pig-Lead by the Point-To-Plane Technique (Withdrawn 1995)
ASTM E 363 : 2016 : REDLINE Standard Test Methods for Chemical Analysis of Chromium and Ferrochromium
ASTM B 248 : 2017 : REDLINE Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar
ASTM E 278 : 2001 : R2010 : EDT 1 Standard Test Method for Determination of Phosphorus in Iron Ores by Phosphomolybdate Coprecipitation and Nitric Acid Titrimetry
ASTM E 2295 : 2013 : REDLINE Standard Practice for Fire Assay Silver Corrections in Analysis of Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Silver Determination in Slags and Cupels
ASTM E 2294 : 2003 : R2008 : EDT 1 Standard Practice for Proof Silver Corrections in Metal Bearing Ores, Concentrates and Related Materials by Fire Assay Gravimetry
ASTM E 278 : 2001 Standard Test Method for the Determiniation of Phosphorus in Iron Ores by Phosphomolybdate Coprecipitation and Nitric Acid Titrimetry
ASTM E 342 : 2011 Standard Test Method for Determination of Chromium Oxide in Chrome Ores by Permanganate Titrimetry
ASTM E 1447 : 2009 : R2016 Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by Inert Gas Fusion Thermal Conductivity/Infrared Detection Method
ASTM E 30 : 1989 Test Methods for Chemical Analysis of Steel, Cast Iron, Open-Hearth Iron, and Wrought Iron (Withdrawn 1995)
ASTM E 378 : 1997 Standard Test Method for Spectrographic Analysis of Silver by the Powder Technique (Withdrawn 2004)
ASTM D 1394 : 1976 : R2003 Standard Test Methods for Chemical Analysis of White Titanium Pigments
ASTM E 56 : 1990 Test Method for Chemical Analysis of Silver Brazing Alloys (Withdrawn 1994)
ASTM B 456 : 2017 : REDLINE Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus<brk/> Chromium and Nickel Plus Chromium
ASTM D 1394 : 1976 : R1999 Standard Test Methods for Chemical Analysis of White Titanium Pigments
ASTM E 278 : 2001 : R2005 Standard Test Method for the Determination of Phosphorus in Iron Ores by Phosphomolybdate Coprecipitation and Nitric Acid Titrimetry
ASTM E 1446 : 2013 : REDLINE Standard Test Method for Chemical Analysis of Refined Gold by Direct Current Plasma Atomic Emission Spectrometry
ASTM E 1552 : 2015 : REDLINE Standard Test Method for Determining Hafnium in Zirconium and Zirconium Alloys By Direct Current Plasma—Atomic Emission Spectrometry
ASTM C 458 : 1998 : R2006 Standard Test Method for Organic Fiber Content of Asbestos-Cement Products
ASTM E 1024 : 1997 Standard Guide for Chemical Analysis of Metals and Metal Bearing Ores by Flame Atomic Absorption Spectrophotometry
ASTM E 1691 : 1995 Standard Guide for Evaluation and Assessment of Analytical Chemistry Laboratories
ASTM D 345 : 2002 Side bearings of the freight wagon bogies. General specifications
ASTM C 458 : 1998 Standard Test Method for Organic Fiber Content of Asbestos-Cement Products
ASTM E 1724 : 1995 : R2001 Standard Guide for Testing and Certification of Metal and Metal-Related Reference Materials (Withdrawn 2010)
ASTM E 421 : 1988 TEST METHOD FOR SPECTROGRAPHIC DETERMINATION OF SILICON AND ALUMINUM IN HIGH-PURITY IRON
ASTM E 2293 : 2003 : R2008 : EDT 1 Standard Practice for Drying of Metal Bearing Ores, Concentrates and Related Metallurgical Materials for the Determination of Mercury
ASTM E 945 : 2012 : REDLINE Standard Test Method for Determination of Zinc in Zinc Ores and Concentrates by EDTA Complexometric Titrimetry
ASTM E 247 : 2001 : R2005 Standard Test Method for Determination of Silica in Manganese Ores, Iron Ores, and Related Materials by Gravimetry
ASTM B 170 : 1999 : R2010 Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes
ASTM D 1394 : 1976 : R2009 Standard Test Methods for Chemical Analysis of White Titanium Pigments
ASTM E 35 : 1988 : R1997 Standard Test Methods for Chemical Analysis of Magnesium and Magnesium Alloys
ASTM E 1447 : 2009 Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity/Infrared Detection Method
ASTM E 414 : 1983 : R1987 Method for Spetrographic Analysis of Copper by the Briquet Technique
ASTM E 1335 : 2008 Standard Test Methods for Determination of Gold in Bullion by Fire Assay Cupellation Analysis
ASTM D 4042 : 1993 : R2003 : EDT 1 Test Method for Sampling and Testing for Ash and Total Iron in Steel Mill Dispersions of Rolling Oils
ASTM E 1473 : 2016 : REDLINE Standard Test Methods for Chemical Analysis of Nickel, Cobalt and High-Temperature Alloys
ASTM E 478 : 2008 : R2017 Standard Test Methods for Chemical Analysis of Copper Alloys
ASTM E 37 : 2005 Standard Test Methods for Chemical Analysis of Pig Lead
ASTM E 200 : 2016 : REDLINE Standard Practice for Preparation, Standardization, and Storage of Standard and Reagent Solutions for Chemical Analysis
ASTM E 478 : 2008 Standard Test Methods for Chemical Analysis of Copper Alloys
ASTM E 465 : 2011 Standard Test Methods for Determination of Manganese (IV) in Manganese Ores by Redox Titrimetry
ASTM C 760 : 1990 : R2002 Standard Test Methods for Chemical and Spectrochemical Analysis of Nuclear-Grade Silver-Indium-Cadmium Alloys
ASTM E 372 : 2013 : REDLINE Standard Test Method for Determination of Calcium and Magnesium in Magnesium Ferrosilicon by EDTA Titration
ASTM E 106 : 1983 : R2004 Standard Test Methods for Chemical Analysis of Copper-Beryllium Alloys (Withdrawn 2011)
ASTM E 247 : 2001 Standard Test Method for Determination of Silica in Manganese Ores, Iron Ores, and Related Materials by Gravimetry
ASTM E 465 : 2011 : R2017 Standard Test Methods for Determination of Manganese (IV) in Manganese Ores by Redox Titrimetry
ASTM B 604 : 1991 : R1997 Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics
ASTM E 350 : 2012-09 TEST METHODS FOR CHEMICAL ANALYSIS OF CARBON STEEL, LOW-ALLOY STEEL, SILICON ELECTRICAL STEEL, INGOT IRON, AND WROUGHT IRON
ASTM E 62 : 1989 : R1996 Standard Test Methods for Chemical Analysis of Copper and Copper Alloys (Photometric Methods)
ASTM E 360 : 1996 Standard Test Methods for Chemical Analysis of Silicon and Ferrosilicon
ASTM E 246 :2010 Standard Test Methods for Determination of Iron in Iron Ores and Related Materials by Dichromate Titrimetry
ASTM E 353 : 2014 : REDLINE Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys
ASTM D 3610 : 2000 : R2015 Standard Test Method for Total Cobalt in Alumina-Base Cobalt-Molybdenum Catalyst by Potentiometric Titration Method
ASTM D 4042 : 1993 : R2014 Standard Test Method for Sampling and Testing for Ash and Total Iron in Steel Mill Dispersions of Rolling Oils
ASTM E 53 : 2007 : R2013 Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry (Withdrawn 2022)
ASTM E 367 : 2016 : REDLINE Standard Test Methods for Chemical Analysis of Ferroniobium
ASTM E 2296 : 2003 : R2008 : EDT 1 Standard Practice for Silver Corrections in Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Fire Assay Slag Recycling and Cupel Proof Gravimetry
ASTM B 368 : 2009 Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)
ASTM E 439 : 2017 : REDLINE Standard Test Methods for Chemical Analysis of Beryllium
ASTM E 2792 : 2013 : REDLINE Standard Test Method for Determination of Hydrogen in Aluminum and Aluminum Alloys by Inert Gas Fusion
MIL-I-706 Revision A:1962 IRON OXIDE, FERRIC, RED DRY [NATURAL AND SYNTHETIC]
ASTM C 458 : 1998 : R2002 : EDT 1 Standard Test Method for Organic Fiber Content of Asbestos-Cement Products
ASTM C 146 : 1994 : REV A : R1999 Standard Test Methods for Chemical Analysis of Glass Sand
ASTM E 120 : 2000 Standard Test Methods for Chemical Analysis of Titanium and Titanium Alloys (Withdrawn 2003)
ASTM E 486 : 1973 : R1987 Method for Spectrographic Analysis of Admiralty Metal by the Cast Pin and Point-To-Plane Techniques
ASTM E 1691 : 1995 : R2001 Standard Guide for Evaluation and Assessment of Analytical Chemistry Laboratories (Withdrawn 2007)
ASTM E 248 : 2012 : REDLINE Standard Test Method for Determination of Manganese in Manganese Ores by Pyrophosphate Complexed Permanganate Potentiometric Titrimetry
ASTM E 75 : 1976 : R2004 Standard Test Methods for Chemical Analysis of Copper-Nickel and Copper-Nickel-Zinc Alloys (Withdrawn 2010)
ASTM E 2294 : 2003 : R2013 Standard Practice for Proof Silver Corrections in Metal Bearing Ores, Concentrates, and Related Materials by Fire Assay Gravimetry
ASTM B 115 : 2010 : R2016 Standard Specification for Electrolytic Copper Cathode
ASTM E 278 : 2001 : R2015 : EDT 1 Standard Test Method for Determination of Phosphorus in Iron Ores by Phosphomolybdate Coprecipitation and Nitric Acid Titrimetry
ASTM F 1277 : 2002 Standard Test Method for Determination of Leachable Chloride in Packing and Gasketing Materials by Ion-Selective Electrode Technique
ASTM E 118 : 1989 : R1996 Standard Test Methods for Chemical Analysis of Copper-Chromium Alloys
ASTM E 507 : 2013 : REDLINE Standard Test Method for Determination of Aluminum in Iron Ores by Flame Atomic Absorption Spectrometry
ASTM E 247 : 2001 : R2015 : EDT 1 Standard Test Method for Determination of Silica in Manganese Ores, Iron Ores, and Related Materials by Gravimetry
SAE AMS 2280 : 2012 TRACE ELEMENT CONTROL, NICKEL ALLOY CASTINGS
ASTM E 35 : 1988 : R2002 Standard Test Methods for Chemical Analysis of Magnesium and Magnesium Alloys (Withdrawn 2008)
ASTM E 62 : 1989 : R2004 Standard Test Methods for Chemical Analysis of Copper and Copper Alloys (Photometric Methods) (Withdrawn 2010)
ASTM D 4589 : 1996 Standard Test Method for Nitrobenzene in Aniline (Withdrawn 2002)
ASTM E 1097 : 2012 Standard Guide for Determination of Various Elements by Direct Current Plasma Atomic Emission Spectrometry
ASTM E 2296 : 2003 : R2013 Standard Practice for Silver Corrections in Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Fire Assay Slag Recycling and Cupel Proof Gravimetry
ASTM E 395 : 2002 Standard Test Method for Determination of Total Sulfur in Iron Ores and Related Materials by Combustion-Iodate Titration (Withdrawn 2007)
ASTM C 169 : 2016 : REDLINE Standard Test Methods for Chemical Analysis of Soda-Lime and Borosilicate Glass
ASTM A 922 : 2005 : R2010 Standard Specification for Silicon Metal
ASTM D 2674 : 1972 : R2004 : EDT 1 Standard Methods of Analysis of Sulfochromate Etch Solution Used in Surface Preparation of Aluminum
ASTM D 1394 : 1976 : R2014 Standard Test Methods for Chemical Analysis of White Titanium Pigments
ASTM D 2674 : 1972 : R1998 Standard Test Methods for Analysis of Sulfochromate Etch Solution Used in Surface Preparation of Aluminum
ASTM E 38 : 1985 Methods for Chemical Analysis of Nickel-Chromium and Nickel-Chromium-Iron Alloys (Withdrawn 1989)
ASTM E 1941 : 2010 : R2016 Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis
ASTM F 314 : 1970 : R1980 Methods of Test for Identification of Metallic and Fibrous Contaminants in Aerospace Fluids (Withdrawn 1990)
ASTM D 444 : 1988 : R2008 Standard Test Methods for Chemical Analysis of Zinc Yellow Pigment (Zinc Chromate Yellow)
ASTM A 309 : 2001 : R2007 Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test
ASTM E 365 : 1999 Standard Test Methods for the Determination of Vanadium in Ferrovanadium and Vanadium Alloying Additives (Withdrawn 2005)
ASTM E 2941 : 2014 : REDLINE Standard Practices for Extraction of Elements from Ores and Related Metallurgical Materials by Acid Digestion
ASTM E 738 : 2011 : REDLINE Standard Test Method for Determination of Aluminum in Iron Ores and Related Materials by EDTA Complexometric Titrimetry
ASTM E 1335 : 2008 : R2017 Standard Test Methods for Determination of Gold in Bullion by Fire Assay Cupellation Analysis
ASTM E 37 : 2005 : R2011 Standard Test Methods for Chemical Analysis of Pig Lead (Withdrawn 2020)
ASTM E 156 : 1988 Method for Determination of Phosphorus in High-Phosphorus Brazing Alloys (Photometric Method) (Withdrawn 1993)
ASTM E 416 : 1998 : R2004 Standard Practice for Planning and Safe Operation of a Spectrochemical Laboratory (Withdrawn 2005)
DWA-M 143-20:2018 TEST METHOD FOR DROP IMPACT RESISTANCE OF BLOW-MOLDED THERMOPLASTIC CONTAINERS
ASTM E 382 : 2012 : REDLINE Standard Test Method for Determination of Crushing Strength of Iron Ore Pellets
ASTM E 1916 : 2011 : REDLINE Standard Guide for Identification of Mixed Lots of Metals
ASTM E 1409 : 2013 : REDLINE Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by Inert Gas Fusion
ASTM D 4042 : 1993 : R2009 Test Method for Sampling and Testing for Ash and Total Iron in Steel Mill Dispersions of Rolling Oils
ASTM C 760 : 1990 : R2015 Standard Test Methods for Chemical and Spectrochemical Analysis of Nuclear-Grade Silver-Indium-Cadmium Alloys
ASTM B 248M : 2017 : REDLINE Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar (Metric)
ASTM A 922 : 2005 Standard Specification for Silicon Metal
ASTM C 146 : 1994 : REV A : R2014 Standard Test Methods for Chemical Analysis of Glass Sand
ASTM D 444 : 1988 : R2003 Standard Test Methods for Chemical Analysis of Zinc Yellow Pigment (Zinc Chromate Yellow)
ASTM E 2626 : 2008 : EDT 1 Standard Guide for Spectrometric Analysis of Reactive and Refractory Metals (Withdrawn 2017)
ASTM C 146 : 1994 : REV A : R2009 Standard Test Methods for Chemical Analysis of Glass Sand
ASTM E 483 : 1974 : R1983 Method for Spectrographic Analysis of Nickel Alloys by the Silver Chloride-Lithium Fluoride Carrier Technique (Withdrawn 1989)
SAE ARP 1313 : 2014 DETERMINATION OF TRACE ELEMENTS IN HIGH TEMPERATURE ALLOYS
ASTM C 1271:1999 Standard Test Method for X-ray Spectrometric Analysis of Lime and Limestone
ASTM B 604 : 1991 : R2003 : EDT 1 Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics
ASTM B 115 : 2010 Standard Specification for Electrolytic Copper Cathode
ASTM D 444 : 1988 : R1999 Standard Test Methods for Chemical Analysis of Zinc Yellow Pigment (Zinc Chromate Yellow)
ASTM D 3089 : 1997 : R2008 Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes
ASTM C 146 : 1994 : REV A : R2004 Standard Test Methods for Chemical Analysis of Glass Sand
ASTM E 40 : 1988 Standard Test Method for Chemical Analysis of Slab Zinc (Spelter) (Withdrawn 1993)
ASTM E 1812 : 1996 Standard Practice for Optimization of Flame Atomic Absorption Spectrometric Equipment
ASTM D 444 : 1988 : R2014 Standard Test Methods for Chemical Analysis of Zinc Yellow Pigment (Zinc Chromate Yellow)
ASTM A 309 : 2001 Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test
ASTM E 75 : 1976 : R1996 Standard Test Methods for Chemical Analysis of Copper-Nickel and Copper-Nickel-Zinc Alloys
ASTM E 246 : 2010 : R2015 Standard Test Methods for Determination of Iron in Iron Ores and Related Materials by Dichromate Titrimetry
ASTM E 1024 : 1997 : R2004 Standard Guide for Chemical Analysis of Metals and Metal Bearing Ores by Flame Atomic Absorption Spectrophotometry (Withdrawn 2004)
ASTM E 121 : 1983 : R1996 Standard Test Methods for Chemical Analysis of Copper-Tellurium Alloys
ASTM E 47 : 1993 Standard Test Methods for Chemical Analysis of Zinc Die-Casting Alloys (Withdrawn 1997)
ASTM C 760 : 1990 Standard Test Methods for Chemical and Spectrochemical Analysis of Nuclear-Grade Silver-Indium-Cadmium Alloys
ASTM C 760 : 1990 : R2007 Standard Test Methods for Chemical and Spectrochemical Analysis of Nuclear-Grade Silver-Indium-Cadmium Alloys
ASTM D 3610 : 2000 : R2010 Standard Test Method for Total Cobalt In Alumina-Base Cobalt-Molybdenum Catalyst by Potentiometric Titration Method
ASTM D 2674 : 1972 : R2012 Standard Methods of Analysis of Sulfochromate Etch Solution Used in Surface Preparation of Aluminum
ASTM B 368 : 2009 : R2014 Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)
ASTM E 1081 : 1995 : REV A Standard Test Method for Determination of Total Iron in Iron Ores and Related Materials by Silver Reduction-Dichromate Titration (Withdrawn 2002)
ASTM E 39 : 1984 : R1990 : EDT 1 Methods for Chemical Analysis of Nickel
ASTM E 247 : 2001 : R2010 Standard Test Method for Determination of Silica in Manganese Ores, Iron Ores, and Related Materials by Gravimetry
ASTM E 2823 : 2017 : REDLINE Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Mass Spectrometry (Performance-Based)
ASTM C 25 : 2017 : REDLINE TEST METHODS FOR CHEMICAL ANALYSIS OF LIMESTONE, QUICKLIME, AND HYDRATED LIME
ASTM E 1812 : 1996 : R2004 : EDT 1 Standard Practice for Optimization of Flame Atomic Absorption Spectrometric Equipment (Withdrawn 2004)
ASTM E 342 : 2011 : R2016 Standard Test Method for Determination of Chromium Oxide in Chrome Ores by Permanganate Titrimetry
ASTM F 1277 : 2002 : R2009 Standard Test Method for Determination of Leachable Chloride in Packing and Gasketing Materials by Ion-Selective Electrode Technique (Withdrawn 2018)

ASTM E 1 : 2014 : REDLINE Standard Specification for ASTM Liquid-in-Glass Thermometers
ASTM E 438 : 1992 SPECIFICATION FOR GLASSES IN LABORATORY APPARATUS
ASTM E 100 : 2017 : REDLINE SPECIFICATION FOR ASTM HYDROMETERS
ASTM E 1621 : 2013 : REDLINE Standard Guide for Elemental Analysis by Wavelength Dispersive X-Ray Fluorescence Spectrometry

View more information
£69.29
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.