Title | Section |
Scope | 1 |
Referenced Documents | 2 |
ASTM Standards | 2.1 |
EN Standards | 2.2 |
ISO Standards | 2.3 |
Federal Regulations | 2.4 |
Terminology | 3 |
Definitions of Terms Specific to This Standard | 3.1 |
Accessory | 3.1.1 |
Accessory Attachment Components | 3.1.2 |
Bassinet/Cradle Accessory | 3.1.3 |
Cantilevered Accessory | 3.1.4 |
Conspicuous | 3.1.5 |
Cord | 3.1.6 |
Corner Post | 3.1.7 |
Dropgate | 3.1.8 |
Dynamic Load | 3.1.9 |
Fabric | 3.1.10 |
Foldable Side or End | 3.1.11 |
Key Structural Elements | 3.1.12 |
Manufacturer's Recommended Use Position | 3.1.13 |
Mattress | 3.1.14 |
Mesh | 3.1.15 |
Mesh/Fabric Unit | 3.1.16 |
Moveable Side | 3.1.17 |
Non-Full-Size Crib | 3.1.18 |
Non-paper Label | 3.1.19 |
Occupant | 3.1.20 |
Paper Label | 3.1.21 |
Play Yard | 3.1.22 |
Protrusion | 3.1.23 |
Rigid Sided Product | 3.1.24 |
Seam | 3.1.25 |
Static Load | 3.1.26 |
Stationary Side | 3.1.27 |
Strap | 3.1.28 |
Structural Failure | 3.1.29 |
Calibration and Standardization | 4 |
General Requirements | 5 |
Corner Posts | 5.1 |
Scissoring, Shearing, or Pinching | 5.6 |
Latching and Locking Mechanisms | 5.8 |
Openings | 5.9 |
Protective Components | 5.10 |
Labeling | 5.11 |
Stability | 5.12 |
Cord/Strap Length | 5.13 |
Coil Springs | 5.14 |
Entrapment in Accessories | 5.15 |
Mattress | 5.16 |
Mattresses for Rigid Sided Products | 5.17 |
Protrusions | 5.18 |
Bassinet/Cradle Accessories – Missing Accessory Attachment Components | 5.19 |
Record Keeping | 5.20 |
Performance Requirements for Rigid Sided Products | 6 |
Crib-Side Height | 6.2 |
Spacing of Unit Components | 6.3 |
Hardware | 6.4 |
Fasteners | 6.5 |
Construction and Finishing | 6.6 |
Requirements for Cutouts | 6.7 |
Plastic Teething Rail | 6.10 |
Cyclic Test | 6.11 |
Side(s) or End(s) Latch Testing, or Both | 6.12 |
Dropgate or Other Moveable Side Latch Testing | 6.12.1 |
Foldable Side or End Latch Testing | 6.12.2 |
Mattress Support System Vertical Impact Test Requirements | 6.13 |
Mattress Support System Testing | 6.14 |
Crib Side Test Requirements | 6.15 |
Spindle/Slat Strength Testing | 6.16 |
Performance Requirements for Mesh/Fabric Products | 7 |
Height of Sides | 7.2 |
Side Deflection and Strength | 7.3 |
Floor Strength | 7.4 |
Top Rail Covering Material | 7.5 |
Mesh Requirements | 7.6 |
Mesh Openings | 7.6.1 |
Mesh Strength | 7.6.2 |
Fabric Material Requirements | 7.7 |
Fabric Strength | 7.7.1 |
Mesh/Fabric Assembly Requirements | 7.8 |
Sewn Assembly | 7.8.1 |
Seam Strength | 7.8.2 |
Mesh/Fabric Attachment Strength | 7.8.3 |
Mattress Vertical Displacement | 7.9 |
Top Rail Configuration | 7.10 |
Top Rail to Corner Post Attachment | 7.11 |
Test Methods | 8 |
Component Spacing Test Apparatus | 8.1 |
Component-Spacing Test Method | 8.2 |
Test Requirements for Cutouts | 8.3 |
Plastic Teething Rail Test for Rigid Sided Products | 8.4 |
Cyclic Test | 8.5 |
Side or End Latch Test, or Both, for Rigid Sided Products | 8.6 |
Movable Side Latch Tests | 8.6.3 |
Hinged Drop Gate Latch Test | 8.6.4 |
Test Procedure for Latches to Prevent Folding of a Foldable Side or End | 8.6.5 |
Mattress Support System Vertical Impact Test for Rigid Sided Products | 8.7 |
Mattress Support System Test for Rigid Sided Products | 8.8 |
Crib Side Test | 8.9 |
Crib Side Cyclic Tests | 8.9.4 |
Crib Side Static Test | 8.9.5 |
Crib Side Spindle/Slat Torque Test | 8.9.6 |
Spindle/Slat Static Load Strength | 8.10 |
Side Deflection and Strength Tests for Mesh/Fabric Products | 8.11 |
Floor Strength Test for Mesh/Fabric Products | 8.12 |
Locking Mechanism Test | 8.13 |
Dropgate Locking Device Test Method | 8.13.1 |
Folding Latch Test Method | 8.13.2 |
Mesh Opening Test | 8.14 |
Test for Strength of Mesh and Integrity of Attachment | 8.15 |
Mesh/Fabric Attachment Strength Test Method | 8.16 |
Test for Stability of Product | 8.17 |
Permanency of Labels and Warnings | 8.18 |
Removal of Protective Components | 8.21 |
Torque Test | 8.21.3 |
Tension Test | 8.21.4 |
Vinyl Thickness Measurement | 8.22 |
Test for Attachment of Storage Pouch or Other Parts with Printed Warnings | 8.23 |
Cord/Strap Length Test Method | 8.24 |
Protrusions | 8.25 |
Entrapment Tests | 8.26 |
False Latch | 8.27 |
Mattress Vertical Displacement Test | 8.28 |
Top Rail Configuration Test | 8.29 |
Minimum Space when Folded | 8.29.1 |
Top Rail V-Shape Configuration Test | 8.29.2 |
Top Rail to Corner Post Attachment Test | 8.30 |
Load Application Procedure | 8.30.3 |
Bassinet and Cradle Accessory – Sleep Surface Collapse/Tilt | 8.31 |
Marking and Labeling | 9 |
Labeling | 9.1 |
Warning Statements | 9.2 |
Instructional Literature | 10 |
Warning Statements | 10.1.2 |
Water Mattress Use | 10.3.3 |
Keywords | 11 |
Design Guidelines for Protrusions | Annex A2 |