BS 2782-1:Method 150D:1976
Current
The latest, up-to-date edition.
Methods of testing plastics. Thermal properties Cold crack temperature of film and thin sheeting
Hardcopy , PDF
English
30-09-1976
NO CONTENTS SECTION
Lays down a characteristic temperature at which cracks are produced in film or thin sheeting, as a guide to its low-temperature performance. The maximum thickness depends on the stiffness of the material and the ability of the hammer to flatten the loop of material at the test temperature, but is about 1 mm for flexible sheeting. It is known that unsatisfactory results are sometimes obtained with thin polished plasticized PVC sheeting and PVC sheeting having a low plasticizer content.
| Committee |
PRI/52
|
| DevelopmentNote |
Supersedes 74/51003 DC. (06/2005) Reviewed and confirmed by BSI, December 2011. (11/2011)
|
| DocumentType |
Standard
|
| Pages |
4
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
This method determines a characteristic temperature at which cracks are produced in film or thin sheeting, as a guide to its low-temperature performance.
The cold crack temperature should not be considered identical with the low-temperature limit for materials in actual service, since this is influenced by the conditions of service in each case.
The maximum thickness depends on the stiffness of the material and the ability of the hammer to flatten the loop of material at the test temperature, but is about 1 mm for flexible sheeting.
It is known that unsatisfactory results are sometimes obtained with thin polished plasticized PVC sheeting and PVC sheeting having a low plasticizer content.
| Standards | Relationship |
| UNE-EN ISO 2063:2005 | Identical |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.