BS 6779-1:1998
Current
The latest, up-to-date edition.
Highway parapets for bridges and other structures Specification for vehicle containment parapets of metal construction
Hardcopy , PDF
English
21-03-2003
Foreword
Introduction
1 Scope
2 References
3 Definitions
4 Symbols
5 Designation of vehicle parapets
6 General design
7 Materials
8 Additional design requirements for parapets for particular
applications
9 Construction
10 Performance
Annex A (informative) Guidance on levels of containment and
derivation of theoretical design forces
Annex B (informative) Detailed design recommendations for new
designs of post and rail configurations
Annex C (informative) Information to be provided by the
supplier/purchaser
Annex D (normative) Method for dynamic testing
Annex E (normative) Static testing of posts
Annex F Annex deleted
List of references
Defines requirements for design, materials, construction including storage, transport and installation, and testing of vehicle containment parapets of metal construction not less than 12 m long, mounted on plinths not in excess of 100 mm high, for provision of specified levels of containment for vehicles on highways.
| Committee |
B/509/1
|
| DevelopmentNote |
Supersedes BS 6779-1(1992), 96/102247 DC. (04/2003) Reviewed and confirmed by BSI, April 2007. (03/2007)
|
| DocumentType |
Standard
|
| Pages |
74
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| SupersededBy |
| BS 5493:1977 | Code of practice for protective coating of iron and steel structures against corrosion |
| BS EN 288-4:1992 | Specification and approval of welding procedures for metallic materials Welding procedure tests for the arc welding of aluminium and its alloys |
| BS 8118-2:1991 | Structural use of aluminium Specification for materials, workmanship and protection |
| BS 6443:1984 | Method for penetrant flaw detection |
| BS EN 10131:2006 | Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming. Tolerances on dimensions and shape |
| BS 8118-1:1991 | Structural use of aluminium Code of practice for design |
| BS 5400-6:1980 | Steel, concrete and composite bridges Specification for materials and workmanship, steel |
| BS EN 287-1:2011 | Qualification test of welders. Fusion welding Steels |
| BS EN 24018:1992 | Hexagon head screws. Product grade C |
| BS 4483:1985 | Specification for steel fabric for the reinforcement of concrete |
| BS EN 288-2:1992 | Specification and approval of welding procedures for metallic materials Welding procedures specification for arc welding |
| BS EN 24035:1992 | Hexagon thin nuts (chamfered). Product grades A and B |
| BS 4395-1:1969 | Specification for high strength friction grip bolts and associated nuts and washers for structural engineering General grade |
| BS EN 287-2:1992 | Approval testing of welders for fusion welding Aluminium and aluminium alloys |
| BS 6579-5:1986 | Safety fences and barriers for highways Specification for open box beam safety fence (single height) |
| BS 5135:1984 | Specification for arc welding of carbon and carbon manganese steels |
| BS EN 10025:1993 | Hot rolled products of non-alloy structural steels. Technical delivery conditions |
| BS 6579-3:1988 | Safety fences and barriers for highways Specification for components for tensioned rectangular hollow section beam (100 mm x 100 mm) safety fence |
| BS 6744:1986 | Specification for austenitic stainless steel bars for the reinforcement of concrete |
| BS EN 20898-2:1994 | Mechanical properties of fasteners Nuts with specified proof load values. Coarse thread |
| BS 3571-1:1985 | MIG welding Specification for MIG welding of aluminium and aluminium alloys |
| BS EN 970:1997 | Non-destructive examination of fusion welds. Visual examination |
| BS 7475:1991 | Specification for fusion welding of austenitic stainless steels |
| BS EN 10051:2010 | Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels. Tolerances on dimensions and shape |
| BS EN 10210-1:2006 | Hot finished structural hollow sections of non-alloy and fine grain steels Technical delivery requirements |
| BS 6579-6:1988 | Safety fences and barriers for highways Specification for components for open box beam safety fence (double height) |
| BS EN 24034:1992 | Hexagon nuts. Product grade C |
| BS EN 10130:2006 | Cold rolled low carbon steel flat products for cold forming. Technical delivery conditions |
| BS 1387:1985 | Specification for screwed and socketed steel tubes and tubulars and for plain end steel tubes suitable for welding or for screwing to BS 21 pipe threads |
| BS 5400-2:1978 | Steel, concrete and composite bridges Specification for loads |
| BS 5400-3:1982 | Steel, concrete and composite bridges Code of practice for design of steel bridges |
| BS 6579-4:1990 | Safety fences and barriers for highways Specification for components for tensioned rectangular hollow section beam (200 mm x 100 mm) safety fence |
| BS 6072:1981 | Method for magnetic particle flaw detection |
| BS EN 20898-1:1992 | Mechanical properties of fasteners Bolts, screws and studs |
| BS 6579-7:1989 | Safety fences and barriers for highways Specification for components for untensioned corrugated beam safety fence |
| BS EN 288-3:1992 | Specification and approval of welding procedures for metallic materials Welding procedure tests for the arc welding of steels |
| BS 7818:1995 | Specification for pedestrian restraint systems in metal |
| BS 1490:1988 | Specification for aluminium and aluminium alloy ingots and castings for general engineering purposes |
| BS 4464:1969 | Specification for spring washers for general engineering and automobile purposes. Metric series |
| BS 4300-1(1967) : 1967 | WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS FOR GENERAL ENGINEERING PURPOSES (SUPPLEMENTARY SERIES) - ALUMINIUM ALLOY LONGITUDINALLY WELDED TUBE |
| BS EN 10083-2:2006 | Steels for quenching and tempering Technical delivery conditions for non alloy steels |
| BS EN 10034:1993 | Structural steel I and H sections. Tolerances on shape and dimensions |
| BS EN 24032:1992 | Hexagon nuts, style 1. Product grades A and B |
| BS 4848-4:1972 | Hot-rolled structural steel sections Equal and unequal angles |
| BS EN 485-1 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| BS 3019-1:1984 | TIG welding Specification for TIG welding of aluminium, magnesium and their alloys |
| BS EN 10083-1:2006 | Steels for quenching and tempering General technical delivery conditions |
| BS 6779-2:1991 | Highway parapets for bridges and other structures Specification for vehicle containment parapets of concrete construction |
| BS 6579-1:1988 | Safety fences and barriers for highways Specification for components for tensioned corrugated beam safety fence on Z posts |
| BS EN 10056-2:1993 | Specification for structural steel equal and unequal angles Tolerances on shape and dimensions |
| BS EN 10002-1:2001 | Tensile testing of metallic materials Method of test at ambient temperature |
| BS 4320:1968 | Specification for metal washers for general engineering purposes. Metric series |
| BS EN 288-1:1992 | Specification and approval of welding procedures for metallic materials General rules for fusion welding |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.