BS EN 1995-1-1 : 2012
Current
The latest, up-to-date edition.
EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS
Hardcopy , PDF
English
01-01-2012
Foreword
SECTION 1: GENERAL
SECTION 2: BASIS OF DESIGN
SECTION 3: MATERIAL PROPERTIES
SECTION 4: DURABILITY
SECTION 5: BASIS OF STRUCTURAL ANALYSIS
SECTION 6: ULTIMATE LIMIT STATES
SECTION 7: SERVICEABILITY LIMIT STATES
SECTION 8: CONNECTIONS WITH METAL FASTENERS
SECTION 9: COMPONENTS AND ASSEMBLIES
SECTION 10: STRUCTURAL DETAILING AND CONTROL
ANNEX A (INFORMATIVE): BLOCK SHEAR AND PLUG SHEAR FAILURE
AT MULTIPLE DOWEL-TYPE STEEL-TO-TIMBER CONNECTIONS
ANNEX B (INFORMATIVE): MECHANICALLY JOINTED BEAMS
ANNEX C (INFORMATIVE): BUILT-UP COLUMNS
ANNEX D (INFORMATIVE): BIBLIOGRAPHY
Describes the rules for timber structures together with specific design rules for buildings.
Committee |
B/525/5
|
DevelopmentNote |
Supersedes DD ENV 1995-1.1. (12/2004) National Annex of this document is also available. See BS EN 1995-1-1 NA (10/2006) Supersedes BS 5268-3(2006). (04/2010) Also available as part of BS KIT 209. (08/2010) Supersedes BS 5268-6.1(1996), BS 5268-6.2(2001), BS 5268-7.1(1989), BS 5268-7.2(1989), BS 5268-7.3(1989), BS 5268-7.4(1989), BS 5268-7.5(1990), BS 5268-7.6(1990) and BS 5268-7.7(1990) & BS 5268-2(2002). (04/2011) 2004 Edition Re-Issued in May 2014 & incorporates AMD 2 2014. (06/2014)
|
DocumentType |
Standard
|
Pages |
134
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
Standards | Relationship |
I.S. EN 1995-1-1:2005 | Identical |
NF EN 1995-1-1 : 2005 AMD 2 2014 | Identical |
NEN EN 1995-1-1 : 2011 C1 2012 | Identical |
DIN EN 1995-1-1:2010-12 | Identical |
UNI EN 1995-1-1 : 2014 | Identical |
UNE-EN 1995-1-1:2016 | Identical |
NS EN 1995-1-1 : 2004 AMD 2 2014 | Identical |
EN 1995-1-1:2004/A2:2014 | Identical |
DIN EN 1995-1-1 E : 2010 | Identical |
BS EN 50341-2-9 : 2017 | OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 2-9: NATIONAL NORMATIVE ASPECTS (NNA) FOR GREAT BRITAIN AND NORTHERN IRELAND (BASED ON EN 50341-1:2012) |
BS 6037-1:2017 | Planning, design, installation and use of permanently installed access equipment. Code of practice Suspended access equipment |
11/30238046 DC : 0 | BS 4978:2007+A1 - VISUAL STRENGTH GRADING OF SOFTWOOD SPECIFICATION |
13/30274184 DC : 0 | BS 5918 - SOLAR HEATING SYSTEMS FOR DOMESTIC HOT WATER - CODE OF PRACTICE |
15/30253829 DC : 0 | BS 3632 - RESIDENTIAL PARK HOMES - SPECIFICATION |
DEFSTAN 81-41(PT2)/7(2014) : 2014 | PACKAGING OF DEFENCE MATERIEL - PART 2: DESIGN |
14/30277336 DC : 0 | BS 8605-1 - EXTERNAL TIMBER CLADDING - PART 1: METHOD OF SPECIFYING |
11/30228295 DC : 0 | BS 8558 - GUIDE TO THE DESIGN, INSTALLATION, TESTING, OPERATION AND MAINTENANCE OF SERVICES SUPPLYING WATER FOR DOMESTIC USE WITHIN BUILDINGS AND THEIR CURTILAGES - COMPLEMENTARY GUIDANCE TO BS EN 806 |
17/30342710 DC : 0 | BS EN ISO 12215-5 - SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION |
BS EN 1995-2 NA : 2004 | UK NATIONAL ANNEX TO EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 2: BRIDGES |
17/30342093 DC : 0 | BS 6037-1 - PLANNING, DESIGN, INSTALLATION AND USE OF PERMANENTLY INSTALLED ACCESS EQUIPMENT - CODE OF PRACTICE - PART 1: SUSPENDED ACCESS EQUIPMENT |
ISO 12215-5:2008 | Small craft Hull construction and scantlings Part 5: Design pressures for monohulls, design stresses, scantlings determination |
CSA ISO 19901-3 : 2015 | PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 3: TOPSIDES STRUCTURE |
DEFSTAN 81-41(PT2)/8(2015) : 2015 | PACKAGING OF DEFENCE MATERIEL - PART 2: DESIGN |
BS EN ISO 19901-3:2014 | Petroleum and natural gas industries. Specific requirements for offshore structures Topsides structure |
I.S. EN ISO 19901-3:2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 3: TOPSIDES STRUCTURE (ISO 19901-3:2014) |
BS 1139-6:2014 | Metal scaffolding Prefabricated tower scaffolds outside the scope of BS EN 1004, but utilizing components from such systems. Specification |
BS 5502-22(2003) : 2003 | BUILDINGS AND STRUCTURES FOR AGRICULTURE - PART 22: CODE OF PRACTICE FOR DESIGN, CONSTRUCTION AND LOADING |
BS 5756(2007) : 2007 | VISUAL STRENGTH GRADING OF TEMPERATE HARDWOOD - SPECIFICATION |
BS 1133-8(2011) : 2011 | PACKAGING CODE - PART 8: GUIDANCE ON WOODEN BOXES, CASES AND CRATES |
BS 4978(2007) : 2007 | VISUAL STRENGTH GRADING OF SOFTWOOD - SPECIFICATION |
BS 8558:2015 | Guide to the design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages. Complementary guidance to BS EN 806 |
BS 5534(2014) : 2014 | SLATING AND TILING FOR PITCHED ROOFS AND VERTICAL CLADDING - CODE OF PRACTICE |
BS 5974:2017 | Planning, design, setting up and use of temporary suspended access equipment. Code of practice |
11/30238044 DC : 0 | BS 5756:2007+A1 - VISUAL GRADING OF HARDWOOD SPECIFICATION |
14/30300516 DC : 0 | BS EN ISO 19901-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 3: TOPSIDES STRUCTURE |
17/30343371 DC : 0 | BS 5974 - PLANNING, DESIGN, SETTING UP AND USE OF TEMPORARY SUSPENDED ACCESS EQUIPMENT - CODE OF PRACTICE |
12/30177610 DC : 0 | BS 5918 - SOLAR HEATING SYSTEMS FOR DOMESTIC HOT WATER - CODE OF PRACTICE |
11/30197409 DC : DRAFT JULY 2011 | BS 1133-8 - PACKAGING CODE - PART 8: GUIDANCE ON WOODEN BOXES, CASES AND CRATES - SECTION 8: WOODEN BOXES, CASES AND CRATES |
15/30301520 DC : 0 | BS 8004 - CODE OF PRACTICE FOR FOUNDATIONS (FORMERLY CP 2004) |
BS 8605-1:2014 | External timber cladding Method of specifying |
BS 7543:2015 | Guide to durability of buildings and building elements, products and components |
EEMUA 105 : 2014 | FACTORY STAIRWAYS, LADDERS AND HANDRAILS (INCLUDING ACCESS PLATFORMS AND RAMPS) |
CEI EN 50341-2-9 : 2016 | OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 2-9: NATIONAL NORMATIVE ASPECTS (NNA) FOR GREAT BRITAIN AND NORTHERN IRELAND |
EN 50341-2-9:2017 | Overhead electrical lines exceeding AC 1 kV - Part 2-9: National Normative Aspects (NNA) for Great Britain and Northern Ireland (based on EN 50341-1:2012) |
DIN EN ISO 12215-5:2014-10 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION (ISO 12215-5:2008 + AMD 1:2014) |
BS 5268-2:2002 | STRUCTURAL USE OF TIMBER - PART 2: CODE OF PRACTICE FOR PERMISSIBLE STRESS DESIGN, MATERIALS AND WORKMANSHIP |
BS 5918:2015 | Solar heating systems for domestic hot water. Code of practice for design and installation |
BS 5427(2016) : 2016 | CODE OF PRACTICE FOR THE USE OF PROFILED SHEET FOR ROOF AND WALL CLADDING ON BUILDINGS |
BS 8103-3:2009 | Structural design of low-rise buildings Code of practice for timber floors and roofs for housing |
BS 8201:2011 | Code of practice for installation of flooring of wood and wood-based panels |
12/30254626 DC : 0 | PD 6693-1 - RECOMMENDATIONS FOR THE DESIGN OF STRUCTURES TO BS EN 1995 EUROCODE 5 FOR TIMBER STRUCTURES (REVISION OF BS 5268) |
13/30262060 DC : 0 | BS 5502-22+A1 - BUILDINGS AND STRUCTURES FOR AGRICULTURE - PART 22: CODE OF PRACTICE FOR DESIGN, CONSTRUCTION AND LOADING |
BS EN 1995-1-2 NA : 2004 | UK NATIONAL ANNEX TO EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-2: GENERAL - STRUCTURAL FIRE DESIGN |
11/30209204 DC : 0 | BS 8201 - CODE OF PRACTICE FOR INSTALLATION OF FLOORING OF WOOD AND WOOD-BASED PANELS |
UNI EN ISO 12215-5 : 2014 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION |
PD 6693-1:2012 | Recommendations for the design of timber structures to Eurocode 5: Design of timber structures General. Common rules and rules for buildings |
ISO/TR 21136:2017 | Timber structures Vibration performance criteria for timber floors |
BS EN ISO 12215-5 : 2008 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION |
UNE-EN ISO 12215-5:2008 | Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2008) |
15/30095322 DC : 0 | BS 5427 - CODE OF PRACTICE FOR THE USE OF PROFILED SHEET FOR ROOF AND WALL CLADDING ON BUILDINGS |
BS 8558:2011 | Guide to the design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages. Complementary guidance to BS EN 806 |
DEFSTAN 81-041(PT2)/9(2017) : 2017 | PACKAGING OF DEFENCE MATERIEL - PART 2: DESIGN |
CSA Z19901-3 : 2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 3: TOPSIDES STRUCTURE |
09/30191867 DC : 0 | NA TO BS EN 1995-1-1 - AMENDMENT TO UK NATIONAL ANNEX TO EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS |
I.S. EN ISO 12215-5:2008 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION (ISO 12215-5:2008) |
EN ISO 12215-5:2008/A1:2014 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION (ISO 12215-5:2008/AMD 1:2014) |
ISO 19901-3:2014 | Petroleum and natural gas industries — Specific requirements for offshore structures — Part 3: Topsides structure |
EN ISO 19901-3:2014 | Petroleum and natural gas industries - Specific requirements for offshore structures - Part 3: Topsides structure (ISO 19901-3:2014) |
14/30286613 DC : 0 | BS 1139-6 - METAL SCAFFOLDING - PART 6: PREFABRICATED TOWER SCAFFOLDS OUTSIDE THE SCOPE OF BS EN 1004, BUT UTILIZING COMPONENTS FROM SUCH SYSTEMS - SPECIFICATION |
I.S. EN 50341-2-9:2017 | OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 2-9: NATIONAL NORMATIVE ASPECTS (NNA) FOR GREAT BRITAIN AND NORTHERN IRELAND (BASED ON EN 50341-1:2012) |
15/30299694 DC : 0 | BS 8558 - GUIDE TO THE DESIGN, INSTALLATION, TESTING AND MAINTENANCE OF SERVICES SUPPLYING WATER FOR DOMESTIC USE WITHIN BUILDINGS AND THEIR CURTILAGES - COMPLEMENTARY GUIDANCE TO BS EN 806 |
13/30271503 DC : 0 | BS 5534 - SLATING AND TILING FOR PITCHED ROOFS AND VERTICAL CLADDING - CODE OF PRACTICE |
15/30301518 DC : 0 | BS 8002 - CODE OF PRACTICE FOR EARTH RETAINING STRUCTURES |
EN 14592:2008+A1:2012 | Timber structures - Dowel-type fasteners - Requirements |
EN 1194:1999 | Timber structures - Glued laminated timber - Strength classes and determination of characteristic values |
EN 335-2:2006 | Durability of wood and wood-based products - Definition of use classes - Part 2: Application to solid wood |
EN 13986:2004 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
ISO 8970:2010 | Timber structures Testing of joints made with mechanical fasteners Requirements for wood density |
EN 1991-1-6:2005/AC:2013 | Eurocode 1 - Actions on structures Part 1-6: General actions - Actions during execution |
EN 351-1:2007 | Durability of wood and wood-based products - Preservative-treated solid wood - Part 1: Classification of preservative penetration and retention |
EN 14545:2008 | Timber structures - Connectors - Requirements |
EN 1991-1-7:2006/A1:2014 | EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-7: GENERAL ACTIONS - ACCIDENTAL ACTIONS |
EN ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
EN 14279:2004+A1:2009 | Laminated Veneer Lumber (LVL) - Definitions, classification and specifications |
EN 300:2006 | Oriented Strand Boards (OSB) - Definitions, classification and specifications |
EN 1991-1-3:2003/A1:2015 | EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-3: GENERAL ACTIONS - SNOW LOADS |
EN 14250:2010 | Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners |
EN 1380:2009 | Timber structures - Test methods - Load bearing nails, screws, dowels and bolts |
EN 10346:2015 | Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions |
ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
EN 1382:2016 | Timber Structures - Test methods - Withdrawal capacity of timber fasteners |
EN 312:2010 | Particleboards - Specifications |
EN 622-5:2009 | Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF) |
EN 301:2017 | Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements |
ISO 2081:2008 | Metallic and other inorganic coatings Electroplated coatings of zinc with supplementary treatments on iron or steel |
EN 1383:2016 | Timber structures - Test methods - Pull through resistance of timber fasteners |
EN 594:2011 | Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels |
EN 350-2:1994 | Durability of wood and wood-based products - Natural durability of solid wood - Part 2: Guide to natural durability and treatability of selected wood species of importance in Europe |
EN 912:2011 | Timber fasteners - Specifications for connectors for timbers |
EN 26891:1991 | Timber structures - Joints made with mechanical fasteners - General principles for the determination of strength and deformation characteristics (ISO 6891:1983) |
EN 14081-1:2016 | Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements |
EN 28970 : 1991 | TIMBER STRUCTURES - TESTING OF JOINTS MADE WITH MECHANICAL FASTENERS - REQUIREMENTS FOR WOOD DENSITY |
EN 1991-1-5:2003/AC:2009 | EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-5: GENERAL ACTIONS - THERMAL ACTIONS |
EN 1381:2016 | Timber structures - Test methods - Load bearing stapled joints |
ISO 2631-2:2003 | Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 2: Vibration in buildings (1 Hz to 80 Hz) |
EN 1991-1-1:2002/AC:2009 | EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-1: GENERAL ACTIONS - DENSITIES, SELF-WEIGHT, IMPOSED LOADS FOR BUILDINGS |
EN 385:2001 | Finger jointed structural timber - Performance requirements and minimum production requirements |
EN 14374:2004 | Timber structures - Structural laminated veneer lumber - Requirements |
EN 335-3:1995 | Durability of wood and wood-based products - Definition of hazard classes of biological attack - Part 3: Application to wood-based panels |
EN 338:2016 | Structural timber - Strength classes |
EN 13271:2001/AC:2003 | TIMBER FASTENERS - CHARACTERISTIC LOAD-CARRYING CAPACITIES AND SLIP-MODULI FOR CONNECTOR JOINTS |
EN 460:1994 | Durability of wood and wood-based products - Natural durability of solid wood - Guide to the durability requirements for wood to be used in hazard classes |
EN 622-3:2004 | Fibreboards - Specifications - Part 3: Requirements for medium boards |
EN 622-2:2004/AC:2005 | FIBREBOARDS - SPECIFICATIONS - PART 2: REQUIREMENTS FOR HARDBOARDS |
EN 622-4:2009 | Fibreboards - Specifications - Part 4: Requirements for softboards |
EN 387:2001 | Glued laminated timber - Large finger joints - Performance requirements and minimum production requirements |
EN 14358:2016 | Timber structures - Calculation and verification of characteristic values |
EN 383:2007 | Timber Structures - Test methods - Determination of embedment strength and foundation values for dowel type fasteners |
EN 1075:2014 | Timber structures - Test methods - Joints made with punched metal plate fasteners |
EN 335-1:2006 | Durability of wood and wood- based products - Definition of use classes - Part 1: General |
EN 1990:2002/A1:2005/AC:2010 | EUROCODE - BASIS OF STRUCTURAL DESIGN |
EN 636:2012+A1:2015 | Plywood - Specifications |
EN 409:2009 | Timber structures - Test methods - Determination of the yield moment of dowel type fasteners |
EN 1991-1-4:2005/A1:2010 | EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-4: GENERAL ACTIONS - WIND ACTIONS |
EN 14080:2013 | Timber structures - Glued laminated timber and glued solid timber - Requirements |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.