BS EN 60269-1 : 2007
Current
Current
The latest, up-to-date edition.
LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS
Amended by
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-01-2007
Publisher
£280.00
Excluding VAT
INTRODUCTION
1 General
2 Terms and definitions
3 Conditions for operation in service
4 Classification
5 Characteristics of fuses
6 Markings
7 Standard conditions for construction
8 Tests
Annex A (informative) - Measurement of short-circuit
power factor
Annex B (informative) - Calculation of pre-arcing I[2]t
values for 'gG', 'gM', 'gD' and
'gN' fuse-links and calculation
of operating I[2]t values at
reduced voltage
Annex C (informative) - Calculation of cut-off current-time
characteristics
Annex D (informative) - Effect of change of ambient
temperature and surroundings on
the performance of fuse-links
Annex E (normative) - Particular requirements for fuse-bases with
screwless-type terminals for external copper conductors
BIBLIOGRAPHY
Annex ZA (normative) - Normative references to international
publications with their corresponding
European publications
Pertains to fuses incorporating enclosed current-limiting fuse-links with rated breaking capacities of not less than 6 kA, intended for protecting power-frequency a.c. circuits of nominal voltages not exceeding 1000 V or d.c. circuits of nominal voltages not exceeding 1500 V.
| Committee |
PEL/32
|
| DevelopmentNote |
Renumbers and supersedes BS 88-1(1988). 1994 version incorporates amendment 8310 to BS 88-1(1988). Supersedes BS 88-1(1975). (03/2006) Also numbered as BS 88-1(2007). Together with BS 88-1(2007) & BS 88-2(2007) supersedes BS EN 60269-2. & with BS 88-3(2007) & BS 88-1(2007) supersedes BS EN 60269-3. (06/2007) Supersedes 05/30135633 DC, 97/208658 DC & 03/100219 DC. (07/2007) 2007 + A1 2009 Edition is remains current and will be withdrawn on 04/08/2017. Supersedes BS 88-3.1(1995). 2007 Edition Re-Issued in October 2014 & incorporates AMD 2 2014. Supersedes 13/30278215 DC. (11/2014)
|
| DocumentType |
Standard
|
| Pages |
92
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| DIN EN 60269-1 : 2015 | Identical |
| NBN EN 60269-1 : 2007 AMD 2 2014 | Identical |
| I.S. EN 60269-1:2007 | Identical |
| NF EN 60269-1 : 2007 AMD 2 2014 | Identical |
| IEC 60269-1:2006+AMD1:2009+AMD2:2014 CSV | Identical |
| EN 60269-1:2007/A2:2014 | Identical |
| EN 60269-1:2007 | Equivalent |
| BS 88-1(1988) : 1988 AMD 8310 | Identical |
| 09/30181298 DC : 0 | BS 7657 - SPECIFICATION FOR FUSES (CUT-OUTS), ANCILLARY TERMINAL BLOCKS AND INTERCONNECTING UNITS UP TO 100 A RATING, FOR POWER SUPPLIES TO BUILDINGS |
| ENA ER G81-5 : ISSUE 2 2016 | FRAMEWORK FOR NEW INDUSTRIAL AND COMMERCIAL UNDERGROUND CONNECTIONS - PART 5: MATERIALS SPECIFICATION |
| BS 7671(2008) : 2018 | REQUIREMENTS FOR ELECTRICAL INSTALLATIONS - IET WIRING REGULATIONS |
| BS 7430:1998 | Code of practice for earthing |
| BS 7856:2017 | Specification for special design and other features of alternating current watthour meters for active energy for use in the UK (Accuracy Classes A and B) |
| DEFSTAN 02-530/2(2004) : 2004 | REQUIREMENTS FOR MAIN AND DISTRIBUTION SWITCHGEAR - CATEGORY 2 |
| BS DD8431(2005) : 2005 | ELECTRICAL STATIC METERS FOR SECONDARY METERING AND SUB-METERING - SPECIFICATION |
| BS 7375:1996 | Code of practice for distribution of electricity on construction and building sites |
| BS 7654:1997 | Specification for single phase street lighting fuses (cut-outs) for low-voltage public electricity distribution systems. 25 A rating for highway power supplies and street furniture |
| BS 7654:2010 | Specification for single-phase street lighting cut-out assemblies for low-voltage public electricity distribution systems. 25 A rating for highway power supplies and street furniture |
| BS EN 60269-3:1995 | BS Low-voltage fuses Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) |
| 13/30283398 DC : 0 | BS 7656+A1 - SPECIFICATION FOR LOW-VOLTAGE POLE-MOUNTING FUSES (CUT-OUTS) - 315 ARATING |
| ENA ER G81-2 : ISSUE 2 2016 | FRAMEWORK FOR NEW LOW VOLTAGE HOUSING DEVELOPMENT INSTALLATIONS - PART 2: MATERIALS SPECIFICATION |
| BS 88-3.1(1995) : 1995 | LOW-VOLTAGE FUSES - PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) |
| 09/30181290 DC : 0 | BS 7654 - SPECIFICATION FOR SINGLE-PHASE STREET LIGHTING FUSES (CUT-OUTS) FOR LOW-VOLTAGE PUBLIC ELECTRICITY DISTRIBUTION SYSTEMS - 25 A RATING FOR HIGHWAY POWER SUPPLIES AND STREET FURNITURE |
| BS EN 61268:1996 | Alternating current static var-hour meters for reactive energy (classes 2 and 3) |
| BS 7656(1993) : 1993 | SPECIFICATION FOR LOW-VOLTAGE POLE-MOUNTING FUSES (CUT-OUTS) - 400 A RATING |
| BS 7657:2010 | Specification for cut-out assemblies up to 100 A rating, for power supply to buildings |
| 16/30348626 DC : 0 | BS 7856:2017 - SPECIFICATION FOR SPECIAL DESIGN AND OTHER FEATURES OF ALTERNATING CURRENT WATTHOUR METERS FOR ACTIVE ENERGY FOR USE IN THE UK (ACCURACY CLASSES A AND B) |
| BS 7671(2008) : 2008 | REQUIREMENTS FOR ELECTRICAL INSTALLATIONS - IET WIRING REGULATIONS |
| EN 60269-6:2011 | Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems |
| IEC 60038:2009 | IEC standard voltages |
| IEC 60228:2004 | Conductors of insulated cables |
| IEC 60269-4:2009+AMD1:2012+AMD2:2016 CSV | Low-voltage fuses - Part 4: Supplementary requirements forfuse-links for the protection of semiconductor devices |
| IEC 60269-6:2010 | Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems |
| IEC 60127:1974 | Cartridge fuse-links for miniature fuses |
| IEC 60050-441:1984 | International Electrotechnical Vocabulary (IEV) - Part 441: Switchgear, controlgear and fuses |
| IEC 60269-2:2013+AMD1:2016 CSV | Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K |
| ISO 3:1973 | Preferred numbers — Series of preferred numbers |
| IEC 60695-2-11:2014 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) |
| EN 60228:2005 COR 2005 | CONDUCTORS OF INSULATED CABLES |
| ISO 478:1974 | Paper — Untrimmed stock sizes for the ISO-A Series — ISO primary range |
| HD 472 S1:1989/AC:2013 | NOMINAL VOLTAGES FOR LOW-VOLTAGE PUBLIC ELECTRICITY SUPPLY SYSTEMS |
| IEC 60695-2-13:2010+AMD1:2014 CSV | Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods- Glow-wire ignition temperature (GWIT) test method for materials |
| EN 60695-2-13:2010/A1:2014 | FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITION TEMPERATURE (GWIT) TEST METHOD FOR MATERIALS (IEC 60695-2-13:2010/A1:2014) |
| EN 60269-4:2009/A2:2016 | LOW-VOLTAGE FUSES - PART 4: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SEMICONDUCTOR DEVICES (IEC 60269-4:2009/A2:2016) |
| IEC 60695-2-12:2010+AMD1:2014 CSV | Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods- Glow-wire flammability index (GWFI) test method for materials |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| IEC 60269-3:2010+AMD1:2013 CSV | Low-voltage fuses - Part 3: Supplementary requirements for fuses foruse by unskilled persons (fuses mainly for household or similar applications) - Examples of standardized systems of fuses A to F |
| EN 60695-2-10:2013 | Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure |
| EN 60584-1:2013 | Thermocouples - Part 1: EMF specifications and tolerances |
| IEC 60364-3:1993 | Electrical installations of buildings - Part 3: Assessment of general characteristics |
| EN 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
| ISO 4046:1978 | Paper, board, pulp and related terms — Vocabulary |
| HD 60269-2:2013 | Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K |
| IEC TR 60269-5:2014 | Low-voltage fuses - Part 5: Guidance for the application of low-voltage fuses |
| IEC 60947-3:2008+AMD1:2012+AMD2:2015 CSV | Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units |
| ISO 593:1974 | Paper — Untrimmed stock sizes for the ISO-A Series — ISO supplementary range |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| HD 384.3 : 200S2 | ELECTRICAL INSTALLATIONS OF BUILDINGS - ASSESSMENT OF GENERAL CHARACTERISTICS |
| IEC 60695-2-10:2013 | Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure |
| EN 60695-2-12:2010/A1:2014 | FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS (IEC 60695-2-12:2010/A1:2014) |
| IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
| IEC 60584-1:2013 | Thermocouples - Part 1: EMF specifications and tolerances |
| HD 60269-3:2010/A1:2013 | LOW-VOLTAGE FUSES - PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO F |
| IEC 60364-5-52:2009 | Low-voltage electrical installations - Part 5-52: Selection and erection of electrical equipment - Wiring systems |
| EN 60695-2-11:2014 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) (IEC 60695-2-11:2014) |
Summarise
£280.00
Excluding VAT
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.