BS EN 60999-2:2003
Current
The latest, up-to-date edition.
Connecting devices. Electrical copper conductors. Safety requirements for screw-type and screwless-type clamping units Particular requirements for clamping units for conductors above 35 mm2 up to 300 mm2 (included)
Hardcopy , PDF
English
12-08-2003
INTRODUCTION
1 Scope
2 Normative references
3 Definitions
4 General
5 General notes on tests
6 Main characteristics
7 Connection of conductors
8 Constructional requirements
9 Tests
Annex A (informative) Relationship between mm[2] and AWG/kcmil sizes
Annex B (normative) Conductor rated cross-section and corresponding
gauges
Annex C (normative) Construction of stranded and flexible conductors
Annex ZA (normative) Normative references to international publications
with their corresponding European publications
Bibliography
Applies to screw-type and screwless-type clamping units for connecting devices, either as separate entities or as integral parts of equipment, for the connection of electrical copper conductors (complying with IEC 60228), rigid stranded and/or flexible, having a cross-section above 35 mm[2] and up to and including 300 mm[2] and equivalent AWG/kcmil sizes with a rated voltage not exceeding 1000 V a.c. and a frequency up to and including 1000 Hz and 1500 V d.c.
| Committee |
PEL/17
|
| DevelopmentNote |
Supersedes 01/200446 DC (08/2003)
|
| DocumentType |
Standard
|
| Pages |
22
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
IEC 60999-2:2003 Applies to screw-type and screwless-type clamping units for connecting devices, either as separate entities or as integral parts of equipment, for the connection of electrical copper conductors (complying with IEC 60228), rigid stranded and/or flexible, having a cross-section above 35 mm2 and up to and including 300 mm2 and equivalent AWG/kcmil sizes with a rated voltage not exceeding 1 000 V a.c. and a frequency up to and including 1 000 Hz and 1 500 V d.c. It applies to clamping units primarily suitable for connecting unprepared conductors. This standard does not apply to clamping units:
- for connection by crimping or soldering;
- for non-universal clamping units defined in 3.10.2 of IEC 60999-1.
It has the status of a group safety publication in accordance with IEC Guide 104.
| Standards | Relationship |
| NBN EN 60999-2 : 2004 | Identical |
| I.S. EN 60999-2:2003 | Identical |
| DIN EN 60999-2:2004-04 | Identical |
| EN 60999-2:2003 | Identical |
| IEC 60999-2:2003 | Identical |
| NF EN 60999-2 : 2003 | Identical |
| UNE-EN 60999-2:2004 | Identical |
| IEC 60228:2004 | Conductors of insulated cables |
| IEC 60999-1:1999 | Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included) |
| ASTM B 172 : 2017 : REDLINE | Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors |
| HD 383 : S2 AMD 2 | CONDUCTORS OF INSULATED CABLES - GUIDE TO THE DIMENSIONAL LIMITS OF CIRCULAR CONDUCTORS |
| IEC 60228A:1982 | First supplement - Conductors of insulated cables - Guide to the dimensional limits of circular conductors |
| EN 60999-1:2000 | Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm² up to 35 mm² (included) |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.