HD 323.2.20 : 200S3
|
BASIC ENVIRONMENTAL TESTING PROCEDURES - TESTS - TEST T - SOLDERING
|
IEC 61287-1:2014
|
Railway applications - Power converters installed on board rolling stock - Part 1: Characteristics and test methods
|
IEC 60931-2:1995
|
Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1000 V - Part 2: Ageing test and destruction test
|
IEC 60384-14:2013+AMD1:2016 CSV
|
Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains
|
IEC 61048:2006+AMD1:2015 CSV
|
Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements
|
IEC 60068-2-20:2008
|
Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads
|
IEC 60068-2-21:2006
|
Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices
|
IEC 60695-2-11:2014
|
Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT)
|
IEC 60269-1:2006+AMD1:2009+AMD2:2014 CSV
|
Low-voltage fuses - Part 1: General requirements
|
EN 60947-1:2007/A2:2014
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES (IEC 60947-1:2007/A2:2014)
|
IEC 61881:1999
|
Railway applications - Rolling stock equipment - Capacitors for power electronics
|
IEC 60252-2:2010+AMD1:2013 CSV
|
AC motor capacitors - Part 2: Motor start capacitors
|
IEC 61049:1991
|
Capacitors for use in tubular fluorescent and other discharge lamp circuits. Performance requirements
|
IEC 61270-1:1996
|
Capacitors for microwave ovens - Part 1: General
|
IEC 60695-2-12:2010+AMD1:2014 CSV
|
Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods- Glow-wire flammability index (GWFI) test method for materials
|
IEC 60077-2:2017
|
Railway applications - Electric equipment for rolling stock - Part 2: Electrotechnical components - General rules
|
IEC 60831-2:2014
|
Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V - Part 2: Ageing test, self-healing test and destruction test
|
IEC 60146-1-1:2009
|
Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements
|
IEC 60871-1:2014
|
Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V - Part 1: General
|
IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV
|
Low-voltage switchgear and controlgear - Part 1: General rules
|
EN 60068-2-21:2006
|
Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices
|
EN 60664-1:2007
|
Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
|
EN 60071-1:2006/A1:2010
|
INSULATION CO-ORDINATION - PART 1: DEFINITIONS, PRINCIPLES AND RULES
|
IEC TS 60110-2:2000
|
Power capacitors for induction heating installations - Part 2: Ageing test, destruction test and requirements for disconnecting internal fuses
|
IEC 60831-1:2014 RLV
|
Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V - Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation and operation
|
IEC 60252-1:2010+AMD1:2013 CSV
|
AC motor capacitors - Part 1: General - Performance, testing andrating - Safety requirements - Guidance for installation and operation
|
EN 60068-2-78:2013
|
Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
|
IEC 60071-2:1996
|
Insulation co-ordination - Part 2: Application guide
|
IEC 60050-436:1990
|
International Electrotechnical Vocabulary (IEV) - Part 436: Power capacitors
|
EN 60068-2-6:2008
|
Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
|
EN 60071-2:1997
|
Insulation co-ordination - Part 2: Application guide
|
IEC 60071-1:2006+AMD1:2010 CSV
|
Insulation co-ordination - Part 1: Definitions, principles and rules
|
IEC 60077-1:2017
|
Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules
|
IEC 60068-2-14:2009
|
Environmental testing - Part 2-14: Tests - Test N: Change of temperature
|
IEC TS 60871-2:2014
|
Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V - Part 2: Endurance testing
|
EN 60695-2-12:2010/A1:2014
|
FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS (IEC 60695-2-12:2010/A1:2014)
|
IEC 60664-1:2007
|
Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
|
EN 60068-2-14:2009
|
Environmental testing - Part 2-14: Tests - Test N: Change of temperature
|
IEC 60110-1:1998
|
Power capacitors for induction heating installations - Part 1: General
|
EN 60695-2-11:2014
|
Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) (IEC 60695-2-11:2014)
|
EN 60269-1:2007/A2:2014
|
LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS (IEC 60269-1:2006/A2:2014)
|