BS EN ISO 2063:2005
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Thermal spraying. Metallic and other inorganic coatings. Zinc, aluminium and their alloys
Hardcopy , PDF
31-10-2017
English
03-08-2005
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Manner of specifying requirements
5 Classification
6 Manufacture
6.1 Preparation of surfaces to be coated by thermal
spraying
6.2 Coating metal
6.3 Thermal spraying
6.4 Sealing
6.5 Painting
7 Required characteristics
7.1 Thickness
7.2 Appearance
7.3 Adhesion
8 Test methods
8.1 Measurement of thickness
8.2 Adhesion test
Annex A (informative) Adhesion test methods
A.1 Grid test
A.2 Tensile test method
Annex B (informative) Recommendations for use
Annex ZA (normative) Normative references to International
publications with their corresponding
European publications
Bibliography
Define thermal-sprayed metallic coatings for the protection of iron and steel against corrosion by applying zinc or aluminium or their alloys to uncoated surface to be protected.
Committee |
STI/40
|
DevelopmentNote |
Supersedes BS EN 22063 and 02/123296 DC. (08/2005)
|
DocumentType |
Standard
|
Pages |
22
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
NEN EN ISO 2063 : 2005 | Identical |
DIN EN ISO 2063:2005-05 | Identical |
EN ISO 2063:2005 | Identical |
NS EN ISO 2063 : 1ED 2005 | Identical |
SN EN ISO 2063 : 2005 | Identical |
NBN EN ISO 2063 : 2005 | Identical |
ISO 2063:2005 | Identical |
UNE-EN ISO 2063:2005 | Identical |
UNI EN ISO 2063 : 2005 | Identical |
NF EN ISO 2063 : 2005 | Identical |
I.S. EN ISO 2063:2005 | Identical |
08/30142158 DC : DRAFT NOV 2008 | BS 5834-2 - SURFACE BOXES, GUARDS AND UNDERGROUND CHAMBERS FOR GAS AND UTILITIES' PURPOSES - PART 2: SPECIFICATION FOR SURFACE BOXES |
BS 1722-1:2006 | Fences Specification for chain link fences |
DEFSTAN 21-5/4(2016) : 2016 | CODE OF PRACTICE FOR PROTECTIVE FINISHES |
DEFSTAN 03-4/5(2006) : 2006 | THE PRE-TREATMENT AND PROTECTION OF STEEL ITEMS OF MAXIMUM TENSILE STRENGTH EXCEEDING 1450 MPA |
DEFSTAN 03-29/4(2008) : 2008 | PROTECTION OF METALLIC SPRINGS AGAINST CORROSION |
DEFSTAN 00-970(PT0)/9(2012) : 2012 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 03-3/4(2008) : 2008 | PROTECTION OF ALUMINIUM ALLOYS BY SPRAYED METAL COATINGS |
DEFSTAN 00-970(PT0)/17(2016) : 2016 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT0)/7(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT0)/14(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT0)/13(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT0)/11(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT0)/15(2015) : 2015 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT0)/12(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 02-828/3(2013) : 2013 | REQUIREMENTS FOR THERMAL SPRAY DEPOSITION OF METALS AND CERAMICS FOR ENGINEERING PURPOSES |
BS 1722-8:2006 | Fences Specification for mild steel (low carbon steel) continuous bar fences and hurdles |
DEFSTAN 02-318(PT1)/1(2010) : 2010 | NON-TRANSPORTABLE HIGH PRESSURE GAS CYLINDERS PERIODIC INSPECTION, TESTING AND MAINTENANCE - PART 1: ONSHORE SHOP TESTING OF HIGH PRESSURE GAS CYLINDERS |
DEFSTAN 03-4/6(2011) : 2011 | THE PRE-TREATMENT AND PROTECTION OF STEEL ITEMS OF SPECIFIED MAXIMUM TENSILE STRENGTH EXCEEDING 1450 MPA |
DEFSTAN 00-970(PT0)/8(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 03-3/5(2011) : 2011 | PROTECTION OF ALUMINIUM ALLOYS BY SPRAYED METAL COATINGS |
DEFSTAN 21-5/3(2009) : 2009 | CODE OF PRACTICE FOR PROTECTIVE FINISHES |
DEFSTAN 00-970(PT0)/10(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT0)/16(2015) : 2015 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 03-032(PT4)/5(2017) : 2017 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - PART 4: SYSTEMS FOR FERROUS METAL, EXCLUDING ARMOUR |
BS 6510:2010 | Steel-framed windows and glazed doors. Specification |
BS 1722-9:2006 | Fences Specification for mild steel (low carbon steel) fences with round or square verticals and flat horizontals |
BS 6180:2011 | Barriers in and about buildings. Code of practice |
BS 5834-2:2011 | Surface boxes, guards and underground chambers for the purposes of utilities Specification for surface boxes |
SAE AMS03-4A : 2015(S2017) | THE PRE-TREATMENT AND PROTECTION OF STEEL ITEMS OF SPECIFIED MAXIMUM TENSILE STRENGTH EXCEEDING 1450 MPA |
BS 853-1:1990+A3:2011 | Specification for vessels for use in heating systems Calorifiers and storage vessels for central heating and hot water supply |
10/30212801 DC : 0 | BS 6180 - BARRIERS IN AND ABOUT BUILDINGS - CODE OF PRACTICE |
BS 1722-10:2006 | Fences Specification for anti-intruder fences in chain link and welded mesh |
ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
ISO 12944-6:1998 | Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 6: Laboratory performance test methods |
EN ISO 11124-2:1997 | Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 2: Chilled-iron grit (ISO 11124-2:1993) |
ISO 12944-5:2007 | Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 5: Protective paint systems |
ISO 11126-4:1993 | Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 4: Coal furnace slag |
ISO 1463:2003 | Metallic and oxide coatings Measurement of coating thickness Microscopical method |
EN ISO 2064 : 2000 | METALLIC AND OTHER INORGANIC COATINGS - DEFINITIONS AND CONVENTIONS COVERING THE MEASUREMENT OF THICKNESS |
EN ISO 11126-4:1998 | Preparation of steel substrates before application of paintsand related products - Specifications for non-metallic blast-cleaning abrasives - Part 4: Coal furnace slag (ISO 11126-4:1993) |
ISO 4624:2016 | Paints and varnishes — Pull-off test for adhesion |
ISO 12944-2:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 2: Classification of environments |
ISO 12944-1:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 1: General introduction |
ISO 12944-8:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 8: Development of specifications for new work and maintenance |
EN ISO 11126-7:1999 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide (ISO 11126-7:1995) |
ISO 11126-3:1993 | Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 3: Copper refinery slag |
ISO 11124-2:1993 | Preparation of steel substrates before application of paints and related products Specifications for metallic blast-cleaning abrasives Part 2: Chilled-iron grit |
EN ISO 4624:2016 | Paints and varnishes - Pull-off test for adhesion (ISO 4624:2016) |
ISO 12944-4:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 4: Types of surface and surface preparation |
EN ISO 11126-3:1997 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 3: Copper refinery slag (ISO 11126-3:1993) |
ISO 2178:2016 | Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method |
ISO 12944-3:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 3: Design considerations |
EN ISO 14919:2015 | Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification - Technical supply conditions (ISO 14919:2015) |
EN ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings (ISO 8501-1:2007) |
EN 13507:2010 | Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying |
ISO 14919:2015 | Thermal spraying — Wires, rods and cords for flame and arc spraying — Classification — Technical supply conditions |
ISO 2064:1996 | Metallic and other inorganic coatings — Definitions and conventions concerning the measurement of thickness |
ISO 12944-7:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 7: Execution and supervision of paint work |
EN ISO 2178:2016 | Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2178:2016) |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.