CAN/CSA-ISO/IEC 2593-02 (R2011)
Current
The latest, up-to-date edition.
Information Technology - Telecommunications and Information Exchange Between Systems - 34-pole DTE/DCE Interface Connector Mateability Dimensions and Contact Number Assignments (Adopted ISO/IEC 2593:2000, fourth edition, 2000-12-15)
English
01-01-2002
Foreword
1 Scope
2 Normative references
3 Definitions
4 Connector specifications
5 Assignment of contact letters
6 Connector shielding
Annex A (normative) - Adapter for attachment of DTEs
using the 34-pole connector to
DCEs not having implemented the
34-pole connector
Annex B (informative) - Bibliography
Scope This International Standard specifies the 34-pole connector and the assignment of contact numbers at the interface between data terminal equipment (DTE) and data circuit-terminating equipment (DCE) where ITU-T Recommendation V.36 or Recommendation X.21bis together with Recommendation V.10 and V.11 are applicable. Note 1: An interoperation between interfaces designed according to electrical characteristics specified in ITU-T Recommendation V.36 and those specified in ITU-T Recommendation V.11 is, at least to a limited degree, possible. This can be achieved, for example, by using a passive adaptor which joins the interface connectors in accordance with ISO/IEC 2593 and ISO 4902, or ISO 4903, respectively. This International Standard specifies the dimensions of the connector housing and gives recommendations for the type of locking device (jack-screw system) and connector shielding.
| DocumentType |
Standard
|
| ISBN |
1-55324-906-2
|
| Pages |
27
|
| ProductNote |
Reconfirmed EN
|
| PublisherName |
Canadian Standards Association
|
| Status |
Current
|
Scope This International Standard specifies the 34-pole connector and the assignment of contact numbers at the interface between data terminal equipment (DTE) and data circuit-terminating equipment (DCE) where ITU-T Recommendation V.36 or Recommendation X.21bis together with Recommendation V.10 and V.11 are applicable. Note 1: An interoperation between interfaces designed according to electrical characteristics specified in ITU-T Recommendation V.36 and those specified in ITU-T Recommendation V.11 is, at least to a limited degree, possible. This can be achieved, for example, by using a passive adaptor which joins the interface connectors in accordance with ISO/IEC 2593 and ISO 4902, or ISO 4903, respectively. This International Standard specifies the dimensions of the connector housing and gives recommendations for the type of locking device (jack-screw system) and connector shielding.
| Standards | Relationship |
| ISO/IEC 2593:2000 | Identical |
| ISO 4902:1989 | Information technology — Data communication — 37-pole DTE/DCE interface connector and contact number assignments |
| ISO 4903:1989 | Information technology — Data communication — 15-pole DTE/DCE interface connector and contact number assignments |
| ISO 261:1998 | ISO general purpose metric screw threads — General plan |
| IEC 60807-6:1988 | Rectangular connectors for frequencies below 3 MHz - Part 6: Detail specification for a range of rectangular connectors with size 20 (7.5 A) round contacts having polarized guides - Fixed solder contact types |
| IEC 60807-7:1991 | Rectangular connectors for frequencies below 3 MHz - Part 7: Detail specification for a range of connectors with polarized guides or jackscrews and size 16 (13 A) round contacts - Removable crimp contact types with closed crimp barrels, rear insertion/front release, with assessed quality |
| IEC 60050-581:2008 | International Electrotechnical Vocabulary (IEV) - Part 581: Electromechanical components for electronic equipment |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.