DIN 1045-3:2012-03

Foreword
1 Scope
2 Normative references
3 Concepts
4 Documentation and site management
   4.1 Project specification
   4.2 Documentation
        4.2.1 Scope
        4.2.2 Drawings
        4.2.3 Design analysis
        4.2.4 Specification of works
   4.3 Records to be kept during construction work
   4.4 Site manager
5 Falsework, formwork and embedded parts
   5.1 General requirements
   5.2 Falsework
   5.3 Formwork
   5.4 Release agents
   5.5 Embedded parts
   5.6 Striking of formwork and falsework
        5.6.1 Striking times
        5.6.2 Props
6 Reinforcement
   6.1 General requirements
   6.2 Bending, transport and storage of reinforcement
   6.3 Welding of reinforcing steel
   6.4 Laying of reinforcement
7 Prestressing
   7.1 General
   7.2 Transportation and storage
   7.3 Making of tendons
   7.4 Placing of tendons
        7.4.1 General
        7.4.2 Pre-tensioned members
        7.4.3 Post-tensioned members
        7.4.4 Unbonded internal and external tendons
   7.5 Tensioning of tendons
        7.5.1 General
        7.5.2 Pre-tensioned members
        7.5.3 Post-tensioned or unbonded members
   7.6 Corrosion protection
        7.6.1 General
        7.6.2 Pre-tensioned members
        7.6.3 Post-tensioned members
        7.6.4 Internal or external unbonded tendons
        7.6.5 Injection of neat cement grout
        7.6.6 Injection of corrosion protection material
8 Concreting
   8.1 General
   8.2 Transport of concrete
        8.2.1 Transport of concrete to site
        8.2.2 Transport of concrete on site
   8.3 Temperature of concrete
   8.4 Preparatory work
   8.5 Placing and compaction
   8.6 Surface treatment
   8.7 Curing and protection
        8.7.1 General
        8.7.2 Curing methods
        8.7.3 Start of curing process
        8.7.4 Curing time
        8.7.5 Curing compounds
9 Building with precast concrete elements
10 Tolerances
   10.1 General
   10.2 Tolerances for building components and elements
   10.3 Tolerances for concrete cover
   10.4 Tolerances for structural safety
11 Internal control
   11.1 General
   11.2 Control of falsework and formwork
   11.3 Control of reinforcement work
   11.4 Control of prestressing work
   11.5 Control of concreting
Annex A (normative) - Testing the main properties of fresh
           and hardened concrete
   A.1 General
   A.2 Testing the compressive strength of designed ready-mixed
       concrete
Annex B (normative) - Internal control when placing concrete
           of inspection classes 2 and 3 by the contractor
   B.1 Permanent testing laboratory
   B.2 Records
   B.3 Identification of site
Annex C (normative) - Inspection of concrete of inspection
           classes 2 and 3 by an accredited inspection body
   C.1 General
   C.2 Type and frequency of inspection
   C.3 Scope of inspection
   C.4 Sampling
   C.5 Inspection report
Annex D (normative) - Inspection of grouting by an accredited
            inspection body
Bibliography

This standard is included in DIN Handbook 78, 93 and 465.