DIN 50961:2012-04
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
ELECTROPLATED COATINGS - ZINC COATINGS ON IRON OR STEEL - TERMS, TESTING AND CORROSION RESISTANCE
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-01-2012
Superseded date
07-03-2021
Superseded by
£45.95
Excluding VAT
Vorwort
Einleitung
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
3.1 Galvanische Überzüge
3.2 Chromatierüberzüge
3.3 Weitere Begriffe
4 Oberflächenbeschaffenheit
4.1 Grundwerkstoff
5 Kurzzeit-Korrosionsprüfungen und Auswertung
6 Chromatierung mit und ohne Versiegelung
7 Prüfbericht
This Standard is included in DIN Handbook 143, 175, 175/2 and 286/2.
| DevelopmentNote |
Supersedes DIN 50941 (07/2002) Applies in conjunction with DIN EN ISO 2081 issue 05-2009. (04/2012)
|
| DocumentType |
Standard
|
| Pages |
8
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| DIN 7957:1983-03 | HARDWARE; FLAP HINGE ROLLED |
| BWB TL 8405-0180 : 1ED 2001 | FRAME FOR PEAKED CAPS, GE MILITARY POLICE (MP), ARMY |
| BWB TL 3940-0035 : 2ED 2001 | LOAD HARNESS, 10-T LORRY WITH 1-T LOADING CRANE |
| DIN 20030:1992-06 | Hose fittings; straight-way-cock with grip; dimensions, materials, requirements |
| DIN HDBK 143 : 6ED 2002 | STANDARDS FOR CORROSION PROTECTION OF STEEL BY ORGANIC AND METALLIC COATINGS 1 - DIN 267-10 TO DIN 80200 |
| DIN 5297-2:1979-02 | SPRING SNAP WITH FIXED ROUND EYE AND OVAL EYE |
| DIN 1596:1988-02 | LIGHT PIPE CLIPS WITH PIPE-TIGHTENING - SINGLE-ENDED FOR RAIL VEHICLES |
| DIN HDBK 286/2 : 2ED 2011 | KORROSIONSSCHUTZ DURCH BESCHICHTUNGEN UND UEBERZUEGE 2 - METALLISCHE UEBERZUEGE UND KONVERSIONSSCHICHTEN |
| DIN 41307-3:1981-02 | Accessory parts for small transformers and chokes; attachment straps for cores typ E, U and 3 U |
| DIN 14330-2:1985-04 | ALUMINIUM ALLOY DELIVERY COUPLING TYPE C - NOMINAL PRESSURE 16, USED FOR FIRE HOSES S 32 |
| DIN 3016-1:2000-06 | FASTENING CLAMPS - PART 1: WITH TONGUE |
| DIN EN 1670:2007-06 | Building hardware - Corrosion resistance - Requirements and test methods |
| DIN EN 22340:1992-10 | CLEVIS PINS WITHOUT HEAD |
| BWB TL 7195-0050 : 1ED 1977 | SHELTER FURNITURE ITEMS - GENERAL CONDITIONS |
| DIN 3132:1984-07 | TOGGLE-TYPE FASTENERS - SALIENT, WITH SHORT BASE PLATE |
| DIN 1592:1988-02 | HEAVY PIPE CLIPS WITH PIPE-TIGHTENING - SINGLE-ENDED FOR RAIL VEHICLES |
| DIN 72571:2016-08 | Fixing clamps - One-sided fastening |
| DIN 41307-4:1981-04 | Accessory parts for small transformers and chockes; fixing brackets for cores type UI and 3UI |
| DIN 95366:1996-04 | ELASTOMER MOUNTS - POT BEARINGS AND FAIL SAFE POT BEARINGS, TYPES A TO G |
| DIN 3015-2:1999-01 | Fastening clamps - Block clamps - Part 2: Heavy duty (S) |
| DIN 3015-1:1999-01 | Fastening clamps - Block clamps - Part 1: Light duty (L) |
| DIN 7956:1983-07 | HARDWARE; CONTINUOUS HINGE ROLLED |
| DIN 5684-2:1984-05 | ROUND STEEL LINK CHAINS FOR LIFTING PURPOSES - GRADE 6, CALIBRATED, TESTED |
| DIN 3015-3:1999-01 | Fastening clamps - Block clamps - Part 3: Double clamps (Z) |
| DIN 1593:1988-02 | HEAVY PIPE CLIPS WITH PIPE-TIGHTENING - DOUBLE-ENDED FOR RAIL VEHICLES |
| DIN 14310:1986-11 | Aluminium alloy cap fire hose coupling typ D for pressure and suction purposes; nominal pressure 16 |
| I.S. EN 1670:2007 | BUILDING HARDWARE - CORROSION RESISTANCE - REQUIREMENTS AND TEST METHODS |
| DIN EN 28742:1992-10 | THIRD-LENGTH CENTRE GROOVED PINS |
| DIN EN 50066 : 1994 | APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES; MINI-COUPLERS FOR THE INTERCONNECTION OF ELECTRICAL MAINS SUPPLIED EQUIPMENT IN ROAD VEHICLES |
| DIN 5299:1980-10 | SNAP HOOK HALF-ROUND WIRE, ROUND WIRE AND FORGED |
| DIN 7955:1983-03 | HARDWARE; HINGES FORGED |
| DIN 5297-1:1979-02 | SPRING SNAP WITH FIXED SQUARE EYE |
| DIN 7958:1983-07 | HARDWARE; FLAP HINGE FORGED |
| DIN 14313:1989-09 | Aluminium alloy cap fire hose coupling type A for pressure and suction purposes; nominale pressure 16 |
| DIN 1597:1988-02 | LIGHT PIPE CLIPS WITH PIPE-TIGHTENING - DOUBLE-ENDED FOR RAIL VEHICLES |
| DIN 95362:1996-09 | ELASTOMER MOUNTS, HOLLOW-PRISMATIC |
| DIN 72573:2016-08 | Fixing clamps - Two-sided fastening |
| DIN 14330-1:1985-04 | ALUMINIUM ALLOY DELIVERY COUPLING TYPE C - NOMINAL PRESSURE 16, USED FOR FIRE HOSES S 28 |
| DIN VDE 0620-101:1992-05 | PLUGS AND SOCKET-OUTLETS UP TO 400 V 25 A; FLAT NON-WIRABLE TWO POLE PLUGS, 2.5 A 250 V, WITH CORD, FOR THE CONNECTION OF CLASS-2-EQUIPMENT FOR HOUSEHOLD AND SIMILAR PURPOSES |
| DIN 14311:1985-04 | Aluminium alloy cap fire hose coupling type C, for pressure and suction purposes; nominal pressure 16 |
| DIN EN 22338:1992-10 | UNHARDENED PARALLEL PINS |
| DIN 72572:2016-08 | Fixing clamps - Center fastening for 2 lines |
| VDE 0625-10 : 1994 | APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES; MINI-COUPLERS FOR THE INTERCONNECTION OF ELECTRICAL MAINS SUPPLIED EQUIPMENT IN ROAD VEHICLES |
| DIN 5289:1979-02 | SCISSORS SNAP |
| DIN 3016-3:2000-06 | Fastening clamps - Part 3: Section clamps and flange dimensions |
| DIN 55634:2016-10 (Draft) | PAINTS, VARNISHES AND COATINGS - CORROSION PROTECTION OF SUPPORTING THIN-WALLED BUILDING COMPONENTS MADE OF STEEL |
| DIN 5684-1:1984-05 | ROUND STEEL LINK CHAINS FOR LIFTING PURPOSES - GRADE 5, CALIBRATED, TESTED |
| DIN EN 28738:1992-10 | PLAIN WASHERS FOR CLEVIS PINS - PRODUCT GRADE A |
| BS EN 1670:2007 | Building hardware. Corrosion resistance. Requirements and test methods |
| DIN 6899:1988-01 | STEEL THIMBLES FOR FIBRE ROPES |
| BWB TL 4710-0012 : 1ED 2008 | EXTINGUISHING AGENT WYE FOR MARDER 1 A5 INFANTRY FIGHTING VEHICLE WITH MINE PROTECTION |
| DIN VDE 0620-101:1992-05 | PLUGS AND SOCKET-OUTLETS UP TO 400 V 25 A; FLAT NON-WIRABLE TWO POLE PLUGS, 2,5 A 250 V, WITH CORD, FOR THE CONNECTION OF CLASS-2-EQUIPMENT FOR HOUSEHOLD AND SIMILAR PURPOSES |
| DIN EN 60999-1:2000-12 | CONNECTING DEVICES - ELECTRICAL COPPER CONDUCTORS; SAFETY REQUIREMENTS FOR SCREW-TYPE AND SCREWLESS-TYPE CLAMPING UNITS - PART 1: GENERAL REQUIREMENTS AND PARTICULAR REQUIREMENTS FOR CLAMPING UNITS FOR CONDUCTORS FROM 0.2 MM[2] UP TO 35 MM[2] |
| VDE 0609-1:2000-12 | CONNECTING DEVICES - ELECTRICAL COPPER CONDUCTORS - SAFETY REQUIREMENTS FOR SCREW-TYPE AND SCREWLESS-TYPE CLAMPING UNITS - PART 1: GENERAL REQUIREMENTS AND PARTICULAR REQUIREMENTS FOR CLAMPING UNITS FOR CONDUCTORS FROM 0.2 MM[2] UP TO 35 MM[2] |
| DIN 42562-2:1987-04 | TRANSFORMERS - DEHYDRATING BREATHER - CAPACITY 1.2 TO 4.8 KG - COMPONENTS |
| BWB TL 1080-0003 : 7ED 1999 | SPREADER FOR CAMOUFLAGE NET |
| DIN 5297-3:1979-02 | TRIGGER SNAP WITH FIXED SQUARE EYE AND ROUND EYE |
| DIN 7954:1983-03 | HARDWARE; HINGES ROLLED |
| DIN 7464:1983-01 | CASE LOCK; FLUSH TYPE |
| DIN HDBK 175/2 : 1ED 2013 | |
| DIN 3016-2:2000-06 | FASTENING CLAMPS - PART 2: WITH FASTENING LUGS |
| DIN 95363:1994-07 | ELASTOMER MOUNTS; STUD MOUNTS; TYPES A TO F |
| DIN 42552:2009-08 | TRANSFORMERS - OIL LEVEL INDICATOR WITH SCREWPLUG |
| ISO 2080:2008 | Metallic and other inorganic coatings — Surface treatment, metallic and other inorganic coatings — Vocabulary |
| DIN 50979:2008-07 | METALLIC COATINGS - ELECTROPLATED COATINGS OF ZINC AND ZINC ALLOYS ON IRON OR STEEL WITH SUPPLEMENTARY CR(6)-FREE TREATMENT |
| ISO 2081:2008 | Metallic and other inorganic coatings — Electroplated coatings of zinc with supplementary treatments on iron or steel |
| DIN 50018:2013-05 | Testing in a saturated atmosphere in the presence of sulfur dioxide |
| DIN 50969-1:2009-06 | PREVENTION OF HYDROGEN-INDUCED BRITTLE FRACTURE OF HIGH-STRENGTH STEEL BUILDING ELEMENTS - PART 1: ADVICE ON THE PREVENTION |
| DIN EN ISO 2081:2016-04 (Draft) | METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL |
| DIN EN ISO 2080:2009-08 | Metallic and other inorganic coatings - Surface treatment, metallic and other inorganic coatings - Vocabulary (ISO 2080:2008) |
Summarise
£45.95
Excluding VAT
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.