DIN VDE 0110-1 : 1997
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS
Published date
12-01-2013
Superseded date
01-11-2003
Superseded by
Sorry this product is not available in your region.
Hauptabschnitt 1: Allgemeines und Begriffe
1.1 Anwendungsbereich
1.2 Normative Verweisungen
1.3 Begriffe
Hauptabschnitt 2: Grundlage der Isolationskoordination
2.1 Grundsätze der Isolationskoordination
2.2 Spannungen und Bemessungsspannungen
2.3 Frequenz
2.4 Dauer der Spannungsbeanspruchung
2.5 Verschmutzung
2.6 Angaben am Betriebsmittel oder in der Dokumentation
2.7 Isolierstoffe
Hauptabschnitt 3: Anforderungen und Regeln für die
Bemessung
3.1 Bemessung der Luftstrecken
3.2 Bemessung der Kriechstrecken
3.3 Anforderungen an die Ausführung der festen
Isolierung
Hauptabschnitt 4: Prüfungen und Messungen
4.1 Prüfungen
4.2 Messung der Luft- und Kriechstrecken
Anhang A (informativ) Grundlegende Daten über das
Stehvermögen von Luftstrecken
Anhang C (informativ) Teilentladungsprüfverfahren
Anhang D (informativ) Zusätzliche Informationen zu
Teilentladungsprüfverfahren
Anhang ZA (normativ) Normative Verweisungen auf
Internationale Publikationen mit ihren
entsprechenden europäischen Publikationen
| DevelopmentNote |
Supersedes DIN VDE 0110-2. (06/2004)
|
| DocumentType |
Standard
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| VDE 0118-2 : 2010 | ERRICHTEN ELEKTRISCHER ANLAGEN IM BERGBAU UNTER TAGE - TEIL 2: ZUSATZFESTLEGUNGEN |
| VDE V 0100-534 : 1999 | ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 534: SELECTION AND ERECTION OF EQUIPMENT - DEVICES FOR PROTECTION AGAINST OVERVOLTAGE |
| VDE 0750-2-7 : 2000 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-7: PARTICULAR REQUIREMENTS FOR THE SAFETY OF HIGH-VOLTAGE GENERATORS OF DIAGNOSTIC X-RAY GENERATORS |
| DIN ISO 5826 : 2000 | RESISTANCE WELDING EQUIPMENT - TRANSFORMERS - GENERAL SPECIFICATIONS APPLICABLE TO ALL TRANSFORMERS |
| VDE 0100-726 : 90 AMD 1 95 | ERECTION OF POWER INSTALLATIONS WITH NOMINAL VOLTAGES UP TO 1000 V - LIFTING AND HOISTING DEVICES |
| DIN VDE 0660-109 : 1986 | SWITCHGEAR AND CONTROLGEAR - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR, SEMICONDUCTOR CONTACTORS |
| DIN 41715-1:1991-05 | ELECTRICAL COMMUNICATION ENGINEERING; CONNECTORS, TELECOMMUNICATION ADAPTER EQUIPMENT (TAE); COMMON CHARACTERISTICS, TYPES |
| DIN VDE 0800-1 : 1989 | TELECOMMUNICATIONS - GENERAL CONCEPTS - REQUIREMENTS AND TESTS FOR THE SAFETY OF FACILITIES AND APPARATUS |
| DIN EN 60204-3-1 : 1993 | ELECTRICAL EQUIPMENT OF INDUSTRIAL MACHINES - PART 3: PARTICULAR REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS |
| DIN V VDE V 0100-534 : 1999 | ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 534: SELECTION AND ERECTION OF EQUIPMENT - DEVICES FOR PROTECTION AGAINST OVERVOLTAGES |
| VDE V 0829-230 : 1994 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES); PART 230: SYSTEM OVERVIEW; GENERAL TECHNICAL REQUIREMENTS FOR INSTALLATION DEVICES |
| VDE 0220-3 : 1977 | SPECIFICATION FOR SINGLE AND MULTIPLE CABLE CLAMPS WITH INSULATING PARTS IN ELECTRICAL POWER CABLE INSTALLATIONS UP TO 1000 V |
| VDE 0558-2:2001-02 | SEMICONDUCTOR CONVERTORS - PART 2: SELF-COMMUTATED SEMICONDUCTOR CONVERTORS INCLUDING DIRECT D.C. CONVERTORS |
| VDE 0116 : 1989 | ELECTRICAL EQUIPMENT OF FURNACES |
| DIN VDE 0116 : 1989 | ELECTRICAL EQUIPMENT OF FURNACES |
| VDE 0419-1 : 94 AMD 2 99 | TIME SWITCHES FOR TARIFF AND LOAD CONTROL |
| VDE 0800-9 : 1989 | TELECOMMUNICATIONS - KU VALUES OF SAFETY RELEVANT COMPONENTS AND INSULATIONS |
| VDE 0420-1 : 94 AMD 2 99 | ELECTRONIC RIPPLE CONTROL RECEIVERS FOR TARIFF AND LOAD CONTROL |
| VDE 0418-8 : 1994 | ALTERNATING-CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 0.2 S AND 0.5 S) |
| DIN EN 60687 : 1994 | ALTERNATING-CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 0.2 S AND 0.5 S) |
| DIN EN 60601-2-7 : 2000 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-7: PARTICULAR REQUIREMENTS FOR THE SAFETY OF HIGH-VOLTAGE GENERATORS OF DIAGNOSTIC X-RAY GENERATORS |
| DGUV REGEL 110-003 : 2007 | |
| DIN EN 61800-1 : 1999-08 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 1: GENERAL REQUIREMENTS; RATING SPECIFICATIONS FOR LOW VOLTAGE ADJUSTABLE SPEED D.C. POWER DRIVE SYSTEMS |
| VDE 0160-101 : 1999-08 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR LOW VOLTAGE ADJUSTABLE SPEED D.C. POWER DRIVE SYSTEMS |
| DIN EN 60146-2:2001-02 | SEMICONDUCTOR CONVERTORS - PART 2: SELF-COMMUTATED SEMICONDUCTOR CONVERTORS INCLUDING DIRECT D.C. CONVERTORS |
| VDE 0113-301 : 1993 | ELECTRICAL EQUIPMENT OF INDUSTRIAL MACHINES - PART 3: PARTICULAR REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS |
| VDE 0800-1 : 1989 | TELECOMMUNICATIONS; GENERAL CONCEPTS; REQUIREMENTS AND TESTS FOR THE SAFETY OF FACILITIES AND APPARATUS |
| VDE 0804 : 1989 AMD 1 1992 | TELECOMMUNICATIONS; ADDITIONAL REQUIREMENTS FOR CONSTRUCTION AND TESTING OF APPARATUS |
| VDI 3819 Blatt 2:2013-07 | Fire protection building services - Functions and correlations |
| DIN VDE 0100-726 : 1990 AMD 1 1995 | |
| VDE 0039 : 2001 | PREPARATION OF INSTRUCTIONS - STRUCTURING, CONTENT AND PRESENTATION |
| VDE 0160 : 1998-04 | ELECTRONIC EQUIPMENT FOR USE IN POWER INSTALLATIONS |
| DIN VDE 0800-9 : 1989 | TELECOMMUNICATIONS; KU-VALUES OF SAFETY RELEVANT COMPONENTS AND INSULATIONS |
| VDE 0510-2 : 2001 | SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 2: STATIONARY BATTERIES |
| VDE 0557-3 : 2001 COR 1 2004 | LOW-VOLTAGE POWER SUPPLIES, D.C. OUTPUT - PART 3: PRODUCT EMC STANDARD |
| VDE 0557-1:2001-11 | LOW-VOLTAGE POWER SUPPLY DEVICES, DC OUTPUT - PERFORMANCE CHARACTERISTICS AND SAFETY REQUIREMENTS |
| VDE 0750-216 : 1991 | MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE SAFETY OF CAPACITOR DISCHARGE X-RAY GENERATORS |
| DIN V VDE 0829-230 : 1994 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES); PART 230: SYSTEM OVERVIEW; GENERAL TECHNICAL REQUIREMENTS FOR INSTALLATION DEVICES |
| VDE 0160-100 : 2001 COR 2002 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC PRODUCT STANDARD INCLUDING SPECIFIC TEST METHODS |
| VDE 0118-1 : 2010 | ERRICHTEN ELEKTRISCHER ANLAGEN IM BERGBAU UNTER TAGE - TEIL 1: ALLGEMEINE FESTLEGUNGEN |
| VDE 0118-3 : 2001 | ERECTION OF POWER INSTALLATIONS IN MINES - SUPPLEMENTARY REQUIREMENTS FOR TELECOMMUNICATION INSTALLATIONS |
| VDE V 0122-2-2 : 2000 | CONDUCTIVE CHARGING FOR ELECTRIC VEHICLES - PART 2-2: A.C. CHARGING STATION |
| DIN VDE 0750-216 : 1991 | MEDICAL ELECTRICAL EQUIPMENT; PARTICULAR REQUIREMENTS FOR THE SAFETY OF CAPACITOR DISCHARGE X-RAY GENERATORS |
| VDE 0110-1 SUPP 2 : 1998 | INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - COORDINATION OF HIGH-FREQUENCY VOLTAGE STRESS |
| VDE 0435-130 : 2001 | ELECTRICAL RELAYS - INSULATION COORDINATION FOR MEASURING RELAYS - REQUIREMENTS AND TESTS |
| DIN EN 61180-1 : 1995 | HIGH-VOLTAGE TEST TECHNIQUES FOR LOW-VOLTAGE EQUIPMENT - PART 1: DEFINITIONS, TEST AND PROCEDURE REQUIREMENTS |
| DIN EN 50021 : 2000 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - TYPE OF PROTECTION "N" |
| DIN EN 50272-2 : 2001 | SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 2: STATIONARY BATTERIES |
| DIN EN 61071-1 : 1997 | POWER ELECTRONIC CAPACITORS - PART 1: GENERAL |
| VDE 0435-140 : 1999 | ELECTROMECHANICAL NON-SPECIFIED TIME ALL-OR-NOTHING ELECTRICAL RELAYS - INSULATION COORDINATION |
| DIN VDE 0831:2006-04 | ELECTRIC SIGNALLING SYSTEMS FOR RAILROADS |
| DIN EN 61038 : 1994 AMD 2 1999 | TIME SWITCHES FOR TARIFF AND LOAD CONTROL |
| VDE 0435-302 : 1988 | ELECTRICAL RELAYS; ELECTROMECHANICAL MEASURING RELAYS |
| DIN EN 50207 : 2001 | RAILWAY APPLICATIONS - ELECTRONIC POWER CONVERTORS FOR ROLLING STOCK |
| DIN EN 61037 : 1994 AMD 2 1999 | ELECTRONIC RIPPLE CONTROL RECEIVERS FOR TARIFF AND LOAD CONTROL |
| DIN EN 60255-5 : 2001 | ELECTRICAL RELAYS - PART 5: INSULATION COORDINATION FOR MEASURING RELAYS AND PROTECTION EQUIPMENT - REQUIREMENTS AND TESTS |
| DIN EN 61810-5 : 1999 | ELECTROMECHANICAL NON-SPECIFIED TIME ALL-OR-NOTHING RELAYS - PART 5: INSULATION COORDINATION |
| DIN VDE 0805 : 1990 AMD 1 1991 | SAFETY OF INFORMATION TECHNOLOGY EQUIPMENT INCLUDING ELECTRICAL BUSINESS EQUIPMENT |
| DIN VDE 0804 : 1989 AMD 1 1992 | TELECOMMUNICATIONS - ADDITIONAL REQUIREMENTS FOR CONSTRUCTION AND TESTING OF APPARATUS |
| DIN VDE 0545-1 : 1990 | SAFETY REQUIREMENTS FOR THE CONSTRUCTION AND THE INSTALLATION OF EQUIPMENT FOR RESISTANCE WELDING AND ALLIED PROCESSES |
| IEC 60243-1:2013 | Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies |
| IEC 60112:2003+AMD1:2009 CSV | Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
| VDE 0675-1 : 2000 COR 1 2000 | SURGE ARRESTERS - PART 1: NON-LINEAR RESISTOR TYPE GAPPED SURGE ARRESTERS FOR A.C. SYSTEMS |
| IEC 60038:2009 | IEC standard voltages |
| DIN EN 60068-2-2 : 1995 | ENVIRONMENTAL TESTING - PART 2-2: TESTS - TEST B: DRY HEAT |
| VDE 0303-21:2014-01 | ELECTRIC STRENGTH OF INSULATING MATERIALS - TEST METHODS - PART 1: TESTS AT POWER FREQUENCIES (IEC 60243-1:2013) |
| VDE 0106-1 : 1982 | CLASSIFICATION OF ELECTRICAL AND ELECTRONIC EQUIPMENT PROTECTION AGAINST ELECTRIC SHOCK |
| DIN IEC 60038 : 2002 | IEC STANDARD VOLTAGES |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| DIN IEC 60068-2-3:1986-12 | ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; TESTS; TEST CA: DAMP HEAT, STEADY STATE |
| IEC 60364-4-41:2005+AMD1:2017 CSV | Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock |
| DIN EN 60669-1 : 2009 COR 1 2010 | SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED-ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS |
| IEC 60050-151:2001 | International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices |
| IEC 60364-4-442:1993+AMD1:1995+AMD2:1999 CSV | Electrical installations of buildings - Part 4: Protection for safety - Chapter 44: Protection against overvoltages - Section 442: Protection of low-voltage installations against temporary overvoltages and faults between high-voltage systems and earth |
| DIN VDE 0100-537 : 1999 | ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - CHAPTER 53: SWITCHGEAR AND CONTROL GEAR - SECTION 537: DEVICES FOR ISOLATION AND SWITCHING |
| VDE 0304-22:2006-04 | Electrical insulating materials - Thermal endurance properties Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria (IEC 60216-2:2005); German version EN 60216-2:2005 |
| DIN VDE 0470-1 : 1992 | |
| DIN EN 60730-1:2017-05 | AUTOMATIC ELECTRICAL CONTROLS - PART 1: GENERAL REQUIREMENTS (IEC 60730-1:2013, MODIFIED + COR1:2014) |
| VDE 0632-1 : 2009 COR 1 2010 | SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED-ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS |
| DIN 40200:1981-10 | NOMINAL VALUE, LIMITING VALUE, RATED VALUE, RATING - CONCEPTS |
| DIN IEC 60068-2-14:1987-06 | ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; TESTS; TEST N: CHANGE OF TEMPERATURE |
| VDE 0303-1 : 1984 | METHOD FOR DETERMINING THE COMPARATIVE AND THE PROOF TRACKING INDICES OF SOLID INSULATING MATERIALS UNDER MOIST CONDITIONS |
| VDE 0301-1:2008-08 | ELECTRICAL INSULATION - THERMAL EVALUATION AND DESIGNATION |
| DIN VDE 0100-442:2013-06 | Low-voltage electrical installations Part 4-442: Protection for safety – Protection of low-voltage installations against temporary overvoltages due to earth faults in the high-voltage system and due to faults in the low voltage system (IEC 60364-4-44:2007 (Clause 442), modified); German implementation HD 60364-4-442:2012<br> |
| IEC 60085:2007 | Electrical insulation - Thermal evaluation and designation |
| DIN EN 60335-1 : 2012 COR 2 2014 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010) |
| DIN IEC 60085 : 1993 | THERMAL EVALUATION AND CLASSIFICATION OF ELECTRICAL INSULATION |
| DIN VDE 0100-443:2016-10 | Low-voltage electrical installations - Part 4-44: Protection for safety – Protection against voltage disturbances and electromagnetic disturbances- Clause 443: Protection against transient overvoltages of atmospheric origin or due to switching (IEC 60364-4-44:2007/A1:2015, modified |
| DIN EN 60068-1:2015-09 | ENVIRONMENTAL TESTING - PART 1: GENERAL AND GUIDANCE (IEC 60068-1:2013) |
| IEC 60068-2-3:1969 | Basic environmental testing procedures - Part 2-3: Tests - Test Ca: Damp heat, steady state |
| DIN VDE 0106-1 : 1982 | CLASSIFICATION OF ELECTRICAL AND ELECTRONIC EQUIPMENT PROTECTION AGAINST ELECTRIC SHOCK |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| IEC 60099-1:1991+AMD1:1999 CSV | Surge arresters - Part 1: Non-linear resistor type gapped surge arresters for a.c. systems |
| IEC GUIDE 104:2010 | The preparation of safety publications and the use of basic safety publications and group safety publications |
| DIN EN 60099-1 : 2000 COR 1 2000 | SURGE ARRESTERS - PART 1: NON-LINEAR RESISTOR TYPE GAPPED SURGE ARRESTERS FOR A.C. SYSTEMS |
| VDE 0631-1 : 2017 | AUTOMATIC ELECTRICAL CONTROLS - PART 1: GENERAL REQUIREMENTS (IEC 60730-1:2013, MODIFIED + COR1:2014) |
| IEC 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| IEC 60669-1:2017 | Switches for household and similar fixed-electrical installations - Part 1: General requirements |
| VDE 0432-1:2011-10 | HIGH-VOLTAGE TEST TECHNIQUES - PART 1: GENERAL DEFINITIONS AND TEST REQUIREMENTS |
| DIN IEC 60050-151:1983-12 | INTERNATIONAL ELECTROTECHNICAL VOCABULARY - CHAPTER 151: ELECTRICAL AND MAGNETIC DEVICES |
| IEC 60364-4-443:1995+AMD1:1998 CSV | Electrical installations of buildings - Part 4: Protection for safety - Chapter 44: Protection against overvoltages - Section 443: Protection against overvoltages of atmospheric origin or due to switching |
| DIN VDE 0100-443:2016-10 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-44: PROTECTION FOR SAFETY - PROTECTION AGAINST VOLTAGE DISTURBANCES AND ELECTROMAGNETIC DISTURBANCES - CLAUSE 443: PROTECTION AGAINST TRANSIENT OVERVOLTAGES OF ATMOSPHERIC ORIGIN OR DUE TO SWITCHING (IEC 60364-4-44:2007/A1:2015, MODIFIED) |
| IEC 60060-1:2010 | High-voltage test techniques - Part 1: General definitions and test requirements |
| DIN IEC 60060-1 : 1994 | HIGH VOLTAGE TEST TECHNIQUES - GENERAL SPECIFICATIONS AND TEST REQUIREMENTS |
| VDE 0304-21:2014-01 | ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 1: AGEING PROCEDURES AND EVALUATION OF TEST RESULTS |
| IEC 60068-2-14:2009 | Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
| VDE 0100-537 : 1999 | ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT; CHAPTER 53: SWITCH GEAR AND CONTROL GEAR; SECTION 537: DEVICES FOR ISOLATION AND SWITCHING |
| DIN VDE 0100-442:2013-06 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-442: PROTECTION FOR SAFETY - PROTECTION OF LOW-VOLTAGE INSTALLATIONS AGAINST TEMPORARY OVERVOLTAGES DUE TO EARTH FAULTS IN THE HIGH-VOLTAGE SYSTEM AND DUE TO FAULTS IN THE LOW VOLTAGE SYSTEM (IEC 60364-4-44:2007 (CLAUSE 442) |
| DIN IEC 60112 : 1984 | METHOD FOR DETERMINING THE COMPARATIVE AND THE PROOF TRACKING INDICES OF SOLID INSULATING MATERIALS UNDER MOIST CONDITIONS |
| IEC 60730-1:2013+AMD1:2015 CSV | Automatic electrical controls - Part 1: General requirements |
Summarise
Sorry this product is not available in your region.