• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 10080:2005

Current
Current

The latest, up-to-date edition.

Steel for the reinforcement of concrete - Weldable reinforcing steel - General
Published date

25-05-2005

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols
5 Designation
   5.1 Bar, coil and de-coiled product
   5.2 Welded fabric
   5.3 Lattice girders
6 Steelmaking and manufacturing processes
7 Performance characteristics
   7.1 Weldability and chemical composition
   7.2 Mechanical properties
   7.3 Dimensions, mass and tolerances
   7.4 Bond strength and surface geometry
   7.5 Verification of performance characteristics
8 Evaluation of conformity
   8.1 Factory production control
   8.2 Initial type testing
   8.3 Continuous surveillance of factory
        production control and audit testing
   8.4 Evaluation, reporting and action
   8.5 Assessment of the long term quality level
9 Test methods
   9.1 Bars, coils and de-coiled products
   9.2 Welded fabric
   9.3 Lattice girders
10 Identification of the manufacturer and the
   technical class
   10.1 Bar
   10.2 Coil
   10.3 De-coiled product
   10.4 Welded fabric
   10.5 Lattice girders
11 Verification of mechanical properties in the case
   of dispute
Annex A (informative) Examples of weld points in
                       lattice girder joints
Annex B (normative) Test methods for lattice girders
Annex C (informative) Bond test for ribbed and indented
                       reinforcing steel - Beam test
Annex D (informative) Bond test for ribbed and indented
                       reinforcing steel - Pull-out test
Annex E (informative) Comparison of symbols used in this
                       European Standard with those used in
                       EN 1992-1-1 and EN 1992-1-2
Annex ZA (informative) Clauses of this European Standard
                       addressing the provisions of the EU
                       Construction Products Directive
Bibliography

This document specifies general requirements and definitions for the performance characteristics of weldable reinforcing steel used for the reinforcement of concrete structures, delivered as finished products in the form of:-bars, coils (rod, wire) and de-coiled products;-sheets of factory-made machine-welded fabric;-lattice girders.1.2Steels according to this document have a ribbed, indented or smooth surface.1.3This document does not apply to:-non-weldable reinforcing steel;-galvanized reinforcing steel;-epoxy-coated reinforcing steel;-corrosion resistant reinforcing steel;-prestressing steels (see prEN 10138-1 to -4);-indented strip;-further processing, e.g. cutting or cutting and bending.

Committee
CEN/TC 459/SC 4
DevelopmentNote
Supersedes ENV 10080. (10/2005)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current
Supersedes

Standards Relationship
DIN EN 10080:2005-08 Identical
I.S. EN 10080:2005 Identical
PN EN 10080 : 2007 Identical
NBN EN 10080 : 2005 Identical
NEN EN 10080 : 2005 Identical
UNI EN 10080 : 2005 Identical
BS EN 10080:2005 Identical
SN EN 10080 : 2005 Identical
UNE-EN 10080:2006 Identical
NF EN 10080 : 2005 Identical
NS EN 10080 : 1ED 2005 Identical
BS EN 10080:2005 Identical

08/30192726 DC : 0 BS EN 1538 - EXECUTION OF SPECIAL GEOTECHNICAL WORK - DIAPHRAGM WALLS
DIN EN 13381-5:2015-02 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 5: APPLIED PROTECTION TO CONCRETE/PROFILED SHEET STEEL COMPOSITE MEMBER
13/30284484 DC : 0 BS CISPR 14-1 ED 6 - REQUIREMENTS FOR HOUSEHOLD APPLIANCES, ELECTRIC TOOLS AND SIMILAR APPARATUS - PART 1: EMISSION
15/30328765 DC : 0 BS EN 12602 - PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE
I.S. EN ISO 14713-2:2009 ZINC COATINGS - GUIDELINES AND RECOMMENDATIONS FOR THE PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - PART 2: HOT DIP GALVANIZING
UNE-EN 13381-3:2016 Test methods for determining the contribution to the fire resistance of structural members - Part 3: Applied protection to concrete members
I.S. ENV 1992-1-1:1992 EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1: GENERAL RULES AND RULES FOR BUILDINGS
12/30268276 DC : 0 BS EN 12602:2008/A1 - PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE
PREN 14199 : DRAFT 2013 EXECUTION OF SPECIAL GEOTECHNICAL WORK - MICROPILES
17/30354239 DC : 0 BS EN 13369 - COMMON RULES FOR PRECAST CONCRETE PRODUCTS
UNI EN 15037-1 : 2008 PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 1: BEAMS
UNI EN 13381-5 : 2014 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF - STRUCTURAL MEMBERS - PART 5: APPLIED PROTECTION TO CONCRETE/PROFILED SHEET STEEL COMPOSITE MEMBER
12/30265747 DC : 0 BS EN 845-2 - SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS
15/30270279 DC : 0 BS EN 16432-2 - RAILWAY APPLICATIONS - BALLASTLESS TRACK SYSTEMS - PART 2: SUBSYSTEMS AND COMPONENTS
13/30280743 DC : 0 BS EN 14199 - EXECUTION OF SPECIAL GEOTECHNICAL WORK - MICROPILES
PREN 1536 : DRAFT 2008 EXECUTION OF SPECIAL GEOTECHNICAL WORK - BORED PILES
07/30166420 DC : DRAFT AUG 2007 BS EN 1520 - PREFABRICATED REINFORCED COMPONENTS OF LIGHTWEIGHT AGGREGATE CONCRETE WITH OPEN STRUCTURE
DIN EN 15381:2008-11 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN PAVEMENTS AND ASPHALT OVERLAYS
10/30212126 DC : 0 BS EN 845-2 - SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS
BS EN 14490:2010 Execution of special geotechnical works. Soil nailing
BS EN 13381-3:2015 Test methods for determining the contribution to the fire resistance of structural members Applied protection to concrete members
08/30186605 DC : DRAFT OCT 2008 BS EN 13381-2 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 2: VERTICAL PROTECTIVE MEMBRANES
DIN EN 16432-2:2015-04 (Draft) RAILWAY APPLICATIONS - BALLASTLESS TRACK SYSTEMS - PART 2: SYSTEM DESIGN, SUBSYSTEMS AND COMPONENTS
PREN 50632-2-6 : DRAFT 2014 ELECTRIC MOTOR-OPERATED TOOLS - DUST MEASUREMENT PROCEDURE - PART 2-6: PARTICULAR REQUIREMENTS FOR HAMMERS
S.R. CEN TS 1992-4-2:2009 DESIGN OF FASTENINGS FOR USE IN CONCRETE - PART 4-2: HEADED FASTENERS
DD CEN/TS 1992-4-2:2009 Design of fastenings for use in concrete Headed fasteners
I.S. EN 16432-2:2017 RAILWAY APPLICATIONS - BALLASTLESS TRACK SYSTEMS - PART 2: SYSTEM DESIGN, SUBSYSTEMS AND COMPONENTS
PREN 1992-4 : DRAFT 2013 EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 4: DESIGN OF FASTENINGS FOR USE IN CONCRETE
I.S. EN 15037-1:2008 PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 1: BEAMS
S.R. CEN TS 1992-4-1:2009 DESIGN OF FASTENINGS FOR USE IN CONCRETE - PART 4-1: GENERAL
I.S. EN ISO 21809-5:2017 PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS (ISO 21809-5:2017)
PREN 12602 : DRAFT 2015 PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE
UNI CEN/TS 1992-4-2 : 2009 DESIGN OF FASTENINGS FOR USE IN CONCRETE - PART 4-2: HEADED FASTENERS
UNE-EN 1992-1-2:2011 Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire design
DD CEN/TS 1992-4-1:2009 Design of fastenings for use in concrete General
13/30286967 DC : 0 BS EN 1992-4 - EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 4: DESIGN OF FASTENINGS FOR USE IN CONCRETE
15/30320416 DC : 0 BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
UNE-EN ISO 21809-5:2018 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 5: External concrete coatings (ISO 21809-5:2017)
I.S. EN 15381:2008 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN PAVEMENTS AND ASPHALT OVERLAYS
BS EN 845-2 : 2013 SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS
BS EN 13877-1:2013 Concrete pavements Materials
BS EN 15183:2006 Products and systems for the protection and repair of concrete structures. Test methods. Corrosion protection test
BS EN 13230-1:2016 Railway applications. Track. Concrete sleepers and bearers General requirements
BS EN 12699:2015 Execution of special geotechnical works. Displacement piles
DIN EN 1537:2001-01 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - GROUND ANCHORS
I.S. EN 12699:2015 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - DISPLACEMENT PILES
DIN EN 1881:2007-01 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - TESTING OF ANCHORING PRODUCTS BY THE PULL-OUT METHOD
CEN/TS 1992-4-2:2009 Design of fastenings for use in concrete - Part 4-2: Headed Fasteners
EN 13381-3:2015 Test methods for determining the contribution to the fire resistance of structural members - Part 3: Applied protection to concrete members
CEN/TS 1992-4-1:2009 Design of fastenings for use in concrete - Part 4-1: General
EN 10079:2007 Definition of steel products
EN 13381-2:2014 Test methods for determining the contribution to the fire resistance of structural members - Part 2: Vertical protective membranes
EN 12602:2016 Prefabricated reinforced components of autoclaved aerated concrete
DIN EN 1090-2:2011-10 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
EN 13381-5:2014 Test methods for determining the contribution to the fire resistance of structural members - Part 5: Applied protection to concrete/profiled sheet steel composite member
EN 13230-1:2016 Railway applications - Track - Concrete sleepers and bearers - Part 1: General requirements
VDI/BV-BS 6205 Blatt 2:2012-04 Lifting inserts and lifting systems for precast concrete elements - Principles, design, applications - Production and placing on the market
I.S. EN 1994-1-2:2005 EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
94/106646 DC : DRAFT AUG 1994 BS EN 1544 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF CREEP UNDER TENSILE STRENGTH AT +23 DEGREES C AND +50 DEGREES C FOR SYNTHETIC RESIN PRODUCTS
12/30259157 DC : 0 BS EN 13381-2 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 2: VERTICAL PROTECTIVE MEMBRANES
DIN EN ISO 14713-2 E : 2010 ZINC COATINGS - GUIDELINES AND RECOMMENDATIONS FOR THE PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - PART 2: HOT DIP GALVANIZING
DIN EN 13670:2011-03 Execution of concrete structures
13/30277618 DC : 0 BS EN 60745-2-6:2010/AA - HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-6: PARTICULAR REQUIREMENTS FOR HAMMERS
I.S. EN 13381-3:2015 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 3: APPLIED PROTECTION TO CONCRETE MEMBERS
14/30310038 DC : 0 BS EN 50632-2-6 - ELECTRIC MOTOR-OPERATED TOOLS - DUST MEASUREMENT PROCEDURE - PART 2-6: PARTICULAR REQUIREMENTS FOR HAMMERS
15/30327977 DC : 0 BS EN 1504-10 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS
08/30192723 DC : 0 BS EN 1536 - EXECUTION OF SPECIAL GEOTECHNICAL WORK - BORED PILES
16/30338749 DC : 0 BS EN ISO 21809-5 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS
BS EN 1504-10:2017 Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Site application of products and systems and quality control of the works
PREN 1317-5 : DRAFT 2013 ROAD RESTRAINT SYSTEMS - PART 5: PRODUCT REQUIREMENTS, TEST AND ASSESSMENT METHODS AND ACCEPTANCE CRITERIA
DIN EN 12602:2015-12 (Draft) PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE
BS EN 50632-2-6:2015 Electric motor-operated tools. Dust measurement procedure Particular requirements for hammers
BS EN ISO 21809-5:2017 Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems External concrete coatings
DIN EN 15037-1:2008-07 Precast concrete products - Beam-and-block floor systems - Part 1: Beams
12/30254408 DC : 0 BS EN 13381-5 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 5: APPLIED PROTECTION TO CONCRETE/PROFILED SHEET STEEL COMPOSITE MEMBERS
10/30218985 DC : DRAFT JUNE 2010 BS EN 13369 - COMMON RULES FOR PRECAST CONCRETE PRODUCTS
PREN 1090-2 : DRAFT 2015 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
UNI CEN/TS 1992-4-1 : 2009 DESIGN OF FASTENINGS FOR USE IN CONCRETE - PART 4-1: GENERAL
DIN EN ISO 14713-1 E : 2010 ZINC COATINGS - GUIDELINES AND RECOMMENDATIONS FOR THE PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - PART 1: GENERAL PRINCIPLES OF DESIGN AND CORROSION RESISTANCE (ISO 14713-1:2017)
UNE-EN 1090-2:2011 Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
UNI EN 13381-2 : 2014 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 2: VERTICAL PROTECTIVE MEMBRANES
BS EN 13369:2013 Common rules for precast concrete products
I.S. EN 13369:2013 COMMON RULES FOR PRECAST CONCRETE PRODUCTS
UNI EN ISO 14713-2 : 2010 ZINC COATINGS - GUIDELINES AND RECOMMENDATIONS FOR THE PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - PART 2: HOT DIP GALVANIZING
UNI EN 1090-2 : 2011 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
EN ISO 14713-2:2009 Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 2: Hot dip galvanizing (ISO 14713-2:2009)
DIN EN 1537:2014-07 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - GROUND ANCHORS
DIN EN ISO 17660-1:2006-12 WELDING - WELDING OF REINFORCING STEEL - PART 1: LOAD-BEARING WELDED JOINTS
DIN EN 12699:2015-07 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - DISPLACEMENT PILES
DIN EN 1544:2007-01 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF CREEP UNDER SUSTAINED TENSILE LOAD FOR SYNTHETIC RESIN PRODUCTS (PC) FOR THE ANCHORING OF REINFORCING BARS
DIN EN 1520:2011-06 Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement
DIN EN 1538:2015-10 EXECUTION OF SPECIAL GEOTECHNICAL WORK - DIAPHRAGM WALLS
DIN EN 15184 E : 2006 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - SHEAR ADHESION OF COATED STEEL TO CONCRETE (PULL-OUT TEST)
DIN EN 14199:2015-07 EXECUTION OF SPECIAL GEOTECHNICAL WORK - MICROPILES
DIN EN 14475:2006-04 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - REINFORCED FILL
DIN EN 15183 E : 2006 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - CORROSION PROTECTION TEST
BS EN 1538 : 2010 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - DIAPHRAGM WALLS
BS EN 14620-3:2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0°C and -165°C Concrete components
I.S. EN 13877-1:2013 CONCRETE PAVEMENTS - PART 1: MATERIALS
DIN EN 1996-1-1:2013-02 Eurocode 6: Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures (includes Amendment 1:2012)
I.S. EN 15050:2007 PRECAST CONCRETE PRODUCTS - BRIDGE ELEMENTS
EN 50632-2-6:2015 Electric motor-operated tools - dust measurement procedure - Part 2-6: Particular requirements for hammers
DIN EN 1536:2015-10 EXECUTION OF SPECIAL GEOTECHNICAL WORK - BORED PILES
I.S. EN 1520:2011 PREFABRICATED REINFORCED COMPONENTS OF LIGHTWEIGHT AGGREGATE CONCRETE WITH OPEN STRUCTURE WITH STRUCTURAL OR NON-STRUCTURAL REINFORCEMENT
I.S. EN 13747:2005 Precast concrete products - Floor plates for floor systems
DIN EN 12602:2016-12 Prefabricated reinforced components of autoclaved aerated concrete
I.S. EN 845-2:2013 SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS
I.S. EN 1536:2010 EXECUTION OF SPECIAL GEOTECHNICAL WORK - BORED PILES
I.S. EN 1537:2013 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - GROUND ANCHORS
I.S. EN 1996-1-1:2005 EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-1: GENERAL RULES FOR REINFORCED AND UNREINFORCED MASONRY STRUCTURES (INCLUDING IRISH NATIONAL ANNEX)
I.S. EN 1538:2010 EXECUTION OF SPECIAL GEOTECHNICAL WORK - DIAPHRAGM WALLS
I.S. EN 13230-1:2016 RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 1: GENERAL REQUIREMENTS
I.S. EN 14199:2015 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - MICROPILES
I.S. EN 10079:2007 DEFINITION OF STEEL PRODUCTS
UNI EN 15050 : 2012 PRECAST CONCRETE PRODUCTS - BRIDGE ELEMENTS
UNE-EN 13381-2:2016 Test methods for determining the contribution to the fire resistance of structural members - Part 2: Vertical protective membranes
UNE-EN 1992-1-1:2013 Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings
I.S. EN 13381-2:2014 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 2: VERTICAL PROTECTIVE MEMBRANES
I.S. EN 1996-3:2006 EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 3: SIMPLIFIED CALCULATION METHODS FOR UNREINFORCED MASONRY STRUCTURES (INCLUDING IRISH NATIONAL ANNEX)
PREN 1504-10 : DRAFT 2015 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS
97/102971 DC : DRAFT APR 1997 PREN 12843 - PRECAST CONCRETE MASTS AND POSTS
BS EN 15037-1:2008 Precast concrete products. Beam-and-block floor systems Beams
DIN EN 15381 E : 2008 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN PAVEMENTS AND ASPHALT OVERLAYS
97/100665 DC : DRAFT JAN 1997 PREN 12725 - GLASS IN BUILDING - GLASS BLOCK WALLS - DESIGN, DIMENSIONS AND PERFORMANCE
BS EN ISO 14713-2:2009 Zinc coatings. Guidelines and recommendations for the protection against corrosion of iron and steel in structures Hot dip galvanizing
95/102829 DC : DRAFT APRIL 1995 PREN 1881-1 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - PART 1: PULL-OUT TEST - UNCRACKED CONCRETE
UNI EN 13369 : 2013 COMMON RULES FOR PRECAST CONCRETE PRODUCTS
BS EN 13381-2:2014 Test methods for determining the contribution to the fire resistance of structural members Vertical protective membranes
07/30172380 DC : 0 BS EN 14490 - EXECUTION OF SPECIAL GEOTECHNICAL WORKS - SOIL NAILING
03/314375 DC : DRAFT DEC 2003 BS EN 14844 - PRECAST CONCRETE BOX CULVERTS
UNE-EN 13381-5:2016 Test methods for determining the contribution to the fire resistance of structural members - Part 5: Applied protection to concrete/profiled sheet steel composite member
PREN 12699 : DRAFT 2013 EXECUTION OF SPECIAL GEOTECHNICAL WORK - DISPLACEMENT PILES
UNE-EN 15381:2008 Geotextiles and geotextile-related products - Characteristics required for use in pavements and asphalt overlays
PREN 13381-5 : DRAFT 2011 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 5: APPLIED PROTECTION TO CONCRETE/PROFILED SHEET STEEL COMPOSITE MEMBERS
EN 1090-2:2008+A1:2011 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
DIN EN 1090-2:2015-07 (Draft) EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
BS EN 1090-2 : 2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
DIN EN ISO 17660-2:2006-12 Welding - Welding of reinforcing steel - Part 2: Non load-bearing welded joints (ISO 17660-2:2006)
DIN EN 1996-3:2010-12 Eurocode 6: Design of masonry structures - Part 3: Simplified calculation methods for unreinforced masonry structures (includes Corrigendum AC:2009)
DIN EN 15050 E : 2012 PRECAST CONCRETE PRODUCTS - BRIDGE ELEMENTS
DIN EN 13747:2010-08 Precast concrete products - Floor plates for floor systems (includes Amendment A2:2010)
BS EN 14475:2006 Execution of special geotechnical works. Reinforced fill
BS EN 15050 : 2007 PRECAST CONCRETE PRODUCTS - BRIDGE ELEMENTS
BS EN 1520:2011 Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement
DIN EN 15050:2012-06 Precast concrete products - Bridge elements (includes Amendment A1:2012)
I.S. EN 1992-1-1:2004 EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
UNE-EN 15050:2008 Precast concrete products - Bridge elements
EN ISO 17660-1:2006 Welding - Welding of reinforcing steel - Part 1: Load-bearing welded joints (ISO 17660-1:2006)
UNI EN 10079 : 2007 DEFINITION OF STEEL PRODUCTS
UNI EN 1537 : 2013 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - GROUND ANCHORS
UNI EN 1994-1-2 : 2014 EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
UNI EN 1520 : 2011 Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non- structural reinforcement
UNI EN 13877-1 : 2013 CONCRETE PAVEMENTS - PART 1: MATERIALS
UNI EN 1992-1-2 : 2005 EUROCODE 2 - DESIGN OF CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
UNI EN 13747 : 2010 PRECAST CONCRETE PRODUCTS - FLOOR PLATES FOR FLOOR SYSTEMS
UNI EN 1881 : 2007 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - TESTING OF ANCHORING PRODUCTS BY THE PULL-OUT METHOD
UNI EN 14475 : 2006 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - REINFORCED FILL
UNI EN 1996-1-1 : 2013 EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-1: GENERAL RULES FOR REINFORCED AND UNREINFORCED MASONRY STRUCTURES
UNI EN 1544 : 2007 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF CREEP UNDER SUSTAINED TENSILE LOAD FOR SYNTHETIC RESIN PRODUCTS (PC) FOR THE ANCHORING OF REINFORCING BARS
08/30186613 DC : DRAFT OCT 2008 BS EN 13381-5 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 5: APPLIED PROTECTION TO CONCRETE/PROFILED SHEET STEEL COMPOSITE MEMBERS
I.S. EN 13670:2009 EXECUTION OF CONCRETE STRUCTURES
I.S. EN 13381-5:2014 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 5: APPLIED PROTECTION TO CONCRETE/PROFILED SHEET STEEL COMPOSITE MEMBER
XP CEN/TS 1992-4-2 : 2009 XP DESIGN OF FASTENINGS FOR USE IN CONCRETE - PART 4-2: HEADED FASTENERS
UNI EN ISO 21809-5 : 2010 PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS
08/30186609 DC : DRAFT OCT 2008 BS EN 13381-3 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 3: APPLIED PROTECTION TO CONCRETE MEMBERS
UNI EN 15381 : 2008 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN PAVEMENTS AND ASPHALT OVERLAYS
PREN 13369 : DRAFT 2017 COMMON RULES FOR PRECAST CONCRETE PRODUCTS
DIN EN 13381-2:2014-12 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 2: VERTICAL PROTECTIVE MEMBRANES
14/30292279 DC : 0 BS EN 13230-1 - RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 1: GENERAL REQUIREMENTS
BS EN ISO 14713-1:2017 Zinc coatings. Guidelines and recommendations for the protection against corrosion of iron and steel in structures General principles of design and corrosion resistance
DIN EN ISO 14713-1:2010-05 ZINC COATINGS - GUIDELINES AND RECOMMENDATIONS FOR THE PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - PART 1: GENERAL PRINCIPLES OF DESIGN AND CORROSION RESISTANCE (ISO 14713-1:2017)
DIN EN 16432-2 E : 2017 RAILWAY APPLICATIONS - BALLASTLESS TRACK SYSTEMS - PART 2: SYSTEM DESIGN, SUBSYSTEMS AND COMPONENTS
PREN 13230-1 : DRAFT 2014 RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 1: GENERAL REQUIREMENTS
DIN EN 15080-8:2010-02 Extended application of results from fire resistance tests - Part 8: Beams
UNE-EN 50632-2-6:2015 Electric motor-operated tools - dust measurement procedure - Part 2-6: Particular requirements for hammers
UNE-EN 13369:2013 Common rules for precast concrete products
UNE-EN 15037-1:2010 Precast concrete products - Beam-and-block floor systems - Part 1: Beams
12/30259154 DC : 0 BS EN 13381-3 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 3: APPLIED PROTECTION TO CONCRETE MEMBERS
08/30160023 DC : DRAFT AUG 2008 BS EN ISO 21809-5 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS
NF EN 14490 : 2010 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - SOIL NAILING
DIN EN 14490 E : 2010 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - SOIL NAILING
DIN EN 1992-1-2:2010-12 Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire design (includes Corrigendum AC:2008)
PREN 10348-2 : DRAFT 2016 STEEL FOR THE REINFORCEMENT OF CONCRETE - GALVANIZED REINFORCING STEEL - PART 2: GALVANIZED REINFORCING STEEL PRODUCTS
UNI EN 14490 : 2010 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - SOIL NAILING
PREN 845-2 : DRAFT 2012 SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS
NF EN 1090-2 : 2009 + A1 2011 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
DIN EN 13369:2013-08 COMMON RULES FOR PRECAST CONCRETE PRODUCTS
EN ISO 21809-5:2017 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 5: External concrete coatings (ISO 21809-5:2017)
EN 1504-10:2017 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works
I.S. EN 1992-1-2:2005 EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN (INCLUDING IRISH NATIONAL ANNEX)
I.S. EN 14490:2010 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - SOIL NAILING
UNE-EN 12602:2011 Prefabricated reinforced components of autoclaved aerated concrete
DIN EN 14475 E : 2006 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - REINFORCED FILL
ISO 14713-2:2009 Zinc coatings Guidelines and recommendations for the protection against corrosion of iron and steel in structures Part 2: Hot dip galvanizing
UNE-EN 13230-1:2016 Railway applications - Track - Concrete sleepers and bearers - Part 1: General requirements
BS EN 1992-1-2:2004 Eurocode 2. Design of concrete structures General rules - Structural fire design
ISO 14713-1:2017 Zinc coatings — Guidelines and recommendations for the protection against corrosion of iron and steel in structures — Part 1: General principles of design and corrosion resistance
UNE-EN 13877-1:2013 Concrete pavements - Part 1: Materials
UNE-EN 1538:2011 Execution of special geotechnical work - Diaphragm walls
BS EN 13747 : 2005 PRECAST CONCRETE PRODUCTS - FLOOR PLATES FOR FLOOR SYSTEMS
ISO 17660-1:2006 Welding — Welding of reinforcing steel — Part 1: Load-bearing welded joints
BS EN 10079:2007 Definition of steel products
UNE-EN 14475:2011 Execution of special geotechnical works - Reinforced fill
BS EN 1996-1-1 : 2005 EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-1: GENERAL RULES FOR REINFORCED AND UNREINFORCED MASONRY STRUCTURES
BS EN 15184:2006 Products and systems for the protection and repair of concrete structures. Test methods. Shear adhesion of coated steel to concrete (pull-out test)
BS EN 1881:2006 Products and systems for the protection and repair of concrete structures. Test methods. Testing of anchoring products by the pull-out method
BS EN 1536 : 2010 EXECUTION OF SPECIAL GEOTECHNICAL WORK - BORED PILES
BS EN 1994-1-2 : 2005 EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
BS EN ISO 17660-2:2006 Welding. Welding of reinforcing steel Non load-bearing welded joints
UNE-EN 13670:2013 Execution of concrete structures
EN 1992-1-2:2004/AC:2008 EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
EN 1536:2010+A1:2015 Execution of special geotechnical work - Bored piles
EN 1538:2010+A1:2015 Execution of special geotechnical work - Diaphragm walls
EN 845-2:2013+A1:2016 SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS
EN 1996-1-1:2005+A1:2012 Eurocode 6 - Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures
EN 1996-3:2006/AC:2009 EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 3: SIMPLIFIED CALCULATION METHODS FOR UNREINFORCED MASONRY STRUCTURES
EN 15184:2006 Products and systems for the protection and repair of concrete structures - Test methods - Shear adhesion of coated steel to concrete (pull-out test)
EN 14490:2010 Execution of special geotechnical works - Soil nailing
EN 1544:2006 Products and systems for the protection and repair of concrete structures - Test methods - Determination of creep under sustained tensile load for synthetic resin products (PC) for the anchoring of reinforcing bars
EN 1881:2006 Products and systems for the protection and repair of concrete structures - Test methods - Testing of anchoring products by the pull-out method
EN 1537:2013 Execution of special geotechnical works - Ground anchors
EN ISO 14713-1:2017 Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 1: General principles of design and corrosion resistance (ISO 14713-1:2017)
EN 15381:2008 Geotextiles and geotextile-related products - Characteristics required for use in pavements and asphalt overlays
EN 13877-1:2013 Concrete pavements - Part 1: Materials
EN 1520:2011 Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement
EN 14620-3:2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 3: Concrete components
EN 13747:2005+A2:2010 Precast concrete products - Floor plates for floor systems
EN 15183:2006 Products and systems for the protection and repair of concrete structures - Test methods - Corrosion protection test
EN 15037-1:2008 Precast concrete products - Beam-and-block floor systems - Part 1: Beams
EN 1992-1-1:2004/A1:2014 EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
EN 13670:2009 Execution of concrete structures
EN 14475:2006/AC:2006 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - REINFORCED FILL
EN 15050:2007+A1:2012 Precast concrete products - Bridge elements
EN 14199:2015 Execution of special geotechnical works - Micropiles
EN ISO 17660-2:2006 Welding - Welding of reinforcing steel - Part 2: Non load-bearing welded joints (ISO 17660-2:2006)
EN 1994-1-2:2005/A1:2014 EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
DIN EN 13381-3:2015-06 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 3: APPLIED PROTECTION TO CONCRETE MEMBERS
ISO 6935-2:2015 Steel for the reinforcement of concrete Part 2: Ribbed bars
DIN EN 14490:2010-11 Execution of special geotechnical works - Soil nailing
BS EN 13670:2009 Execution of concrete structures
07/30151256 DC : 0 BS EN 13670 - EXECUTION OF CONCRETE STRUCTURES
PREN 1538 : DRAFT 2008 EXECUTION OF SPECIAL GEOTECHNICAL WORK - DIAPHRAGM WALLS
16/30340708 DC : 0 BS EN 10348-2 - STEEL FOR THE REINFORCEMENT OF CONCRETE - GALVANIZED REINFORCING STEEL - PART 2: GALVANIZED REINFORCING STEEL PRODUCTS
13/30280740 DC : 0 BS EN 12699 - EXECUTION OF SPECIAL GEOTECHNICAL WORK - DISPLACEMENT PILES
BS EN 13381-5:2014 Test methods for determining the contribution to the fire resistance of structural members Applied protection to concrete/profiled sheet steel composite member
I.S. EN 50632-2-6:2015 ELECTRIC MOTOR-OPERATED TOOLS - DUST MEASUREMENT PROCEDURE - PART 2-6: PARTICULAR REQUIREMENTS FOR HAMMERS
UNE-EN 1996-1-1:2011 Eurocode 6 - Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures
I.S. EN ISO 14713-1:2017 ZINC COATINGS - GUIDELINES AND RECOMMENDATIONS FOR THE PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - PART 1: GENERAL PRINCIPLES OF DESIGN AND CORROSION RESISTANCE (ISO 14713-1:2017)
BS EN 15381:2008 Geotextiles and geotextile-related products. Characteristics required for use in pavements and asphalt overlays
UNE-EN ISO 14713-1:2017 Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 1: General principles of design and corrosion resistance (ISO 14713-1:2017)
UNI EN 13670 : 2010 EXECUTION OF CONCRETE STRUCTURES
BS EN 12602:2016 Prefabricated reinforced components of autoclaved aerated concrete
UNE-EN 14490:2013 Execution of special geotechnical works - Soil nailing
UNE-EN 1994-1-2:2016 Eurocode 4 - Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design.
I.S. EN 1090-2:2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
I.S. EN 13369:2018 COMMON RULES FOR PRECAST CONCRETE PRODUCTS
XP CEN/TS 1992-4-1 : 2009 XP DESIGN FOR FASTENINGS FOR USE IN CONCRETE - PART 4-1: GENERAL
ISO 21809-5:2017 Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 5: External concrete coatings
EN 13369:2018 Common rules for precast concrete products
I.S. EN 12602:2016 PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE
I.S. EN 1504-10:2017 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS
DIN EN 1994-1-2:2010-12 Eurocode 4: Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design (includes Corrigendum AC:2008)
DIN EN 13877-1:2013-06 CONCRETE PAVEMENTS - PART 1: MATERIALS
DIN EN 1992-1-1:2011-01 EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
BS EN ISO 17660-1:2006 Welding. Welding of reinforcing steel Load-bearing welded joints
BS EN 1544:2006 Products and systems for the protection and repair of concrete structures. Test methods. Determination of creep under sustained tensile load for synthetic resin products (PC) for anchoring of reinforcing bars
UNE-EN 1536:2011 Execution of special geotechnical work - Bored piles
BS EN 14199:2015 Execution of special geotechnical works. Micropiles
BS EN 1537:2013 Execution of special geotechnical works. Ground anchors
BS EN 1996-3:2006 Eurocode 6. Design of masonry structures Simplified calculation methods for unreinforced masonry structures
DIN EN ISO 14713-2:2010-05 ZINC COATINGS - GUIDELINES AND RECOMMENDATIONS FOR THE PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - PART 2: HOT DIP GALVANIZING
DIN EN 10079:2007-06 Definition of steel products
EN 12699:2015 Execution of special geotechnical works - Displacement piles
DIN EN 15184:2006-11 Products and systems for the protection and repair of concrete structures - Test methods - Shear adhesion of coated steel to concrete (pull-out test)
DIN EN 15183:2006-11 Products and systems for the protection and repair of concrete structures - Test methods - Corrosion protection test

93/68/EEC : 1993 AMD 2 1998 COUNCIL DIRECTIVE 93/68/EEC OF 22.7.93 AMENDING DIRECTIVES 87/404/EEC, 88/378/EEC, 89/106/EEC, 89/336/EEC, 89/392/EEC, 89/686/EEC, 90/384/EEC, 90/385/EEC, 90/396/EEC, 91/263/EEC, 92/42/EEC AND 73/23/EEC
EN ISO 15630-1:2010 Steel for the reinforcement and prestressing of concrete - Test methods - Part 1: Reinforcing bars, wire rod and wire (ISO 15630-1:2010)
EN 10079:2007 Definition of steel products
EN ISO 377:2017 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017)
89/106/EEC : 1988 COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS
PREN 10138-2 : DRAFT 2000 PRESTRESSING STEELS - PART 2: WIRE
PREN 10138-3 : DRAFT 2000 PRESTRESSING STEELS - PART 3: STRAND
EN ISO 15630-2:2010 Steel for the reinforcement and prestressing of concrete - Test methods - Part 2: Welded fabric (ISO 15630-2:2010)
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
EN 1992-1-2:2004/AC:2008 EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
EN 12390-2:2009 Testing hardened concrete - Part 2: Making and curing specimens for strength tests
ISO 9001:2015 Quality management systems — Requirements
ISO 15630-1:2010 Steel for the reinforcement and prestressing of concrete Test methods Part 1: Reinforcing bars, wire rod and wire
EN 10020:2000 Definition and classification of grades of steel
ISO 7500-1:2015 Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system
PREN 10138-4 : DRAFT 2000 PRESTRESSING STEELS - PART 4: BARS
EN 1992-1-1:2004/A1:2014 EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
ISO 15630-2:2010 Steel for the reinforcement and prestressing of concrete Test methods Part 2: Welded fabric
ISO 377:2017 Steel and steel products — Location and preparation of samples and test pieces for mechanical testing

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.