• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 1015-11 : 1999 AMD 1 2006

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

METHODS OF TEST FOR MORTAR FOR MASONRY - PART 11: DETERMINATION OF FLEXURAL AND COMPRESSIVE STRENGTH OF HARDENED MORTAR
Superseded date

21-11-2019

Published date

12-01-2013

Foreword
1 Scope
2 Normative references
3 Principle
4 Definitions and symbols
5 Apparatus
6 Sampling
7 Preparation and storage of test specimens
8 Determination of flexural strength
9 Determination of compressive strength
10 Test report
Annex A (normative) Description of metal moulds for specimen
        preparation
Annex B (informative) Suggested loading rates for different
        classes of masonry and rendering mortars

Defines a procedure to determine flexural and compressive strength of samples of moulded mortars.

Committee
TC 125
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Superseded
SupersededBy

BS EN 846-14:2012 Methods of test for ancillary components for masonry Determination of the initial shear strength between the prefabricated part of a composite lintel and the masonry above it
07/30166977 DC : DRAFT AUG 2007 BS EN 1744-1 - TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS
UNE-EN 1996-2:2011 Eurocode 6 - Design of masonry structures - Part 2: Design considerations, selection of materials and execution of masonry
I.S. EN 14944-3:2007 INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 3: MIGRATION OF SUBSTANCES FROM FACTORY-MADE CEMENTITITOUS PRODUCTS
15/30317321 DC : 0 BS EN 14944-1 - INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 1: INFLUENCE OF MIGRATION FROM FACTORY MADE CEMENTITIOUS PRODUCTS ON THE ORGANOLEPTIC PARAMETERS
UNE-EN 846-14:2013 Methods of test for ancillary components for masonry - Part 14: Determination of the initial shear strength between the prefabricated part of a composite lintel and the masonry above it
BS EN 1015-12:2016 Methods of test for mortar for masonry Determination of adhesive strength of hardened rendering and plastering mortars on substrates
BS EN 1052-3:2002 Methods of test for masonry Determination of initial shear strength
BS EN 846-8:2000 Methods of test for ancillary components for masonry Determination of load capacity and load-deflection characteristics of joist hangers
BS EN 998-1:2016 Specification for mortar for masonry Rendering and plastering mortar
BS EN 1996-2:2006 Eurocode 6. Design of masonry structures Design considerations, selection of materials and execution of masonry
BS EN 1015-18:2002 Methods of test for mortar for masonry Determination of water absorption coefficient due to capillary action of hardened mortar
EN 1015-18:2002 Methods of test for mortar for masonry - Part 18: Determination of water absorption coefficient due to capillary action of hardened mortar
EN 1052-4:2000 Methods of test for masonry - Part 4: Determination of shear strength including damp proof course
EN 1052-5:2005 Methods of test for masonry - Part 5: Determination of bond strength by the bond wrench method
EN 13084-5:2005/AC:2006 FREE-STANDING CHIMNEYS - PART 5: MATERIAL FOR BRICK LINERS - PRODUCT SPECIFICATIONS
EN 1015-12:2016 Methods of test for mortar for masonry - Part 12: Determination of adhesive strength of hardened rendering and plastering mortars on substrates
EN 1052-2:2016/AC:2017 METHODS OF TEST FOR MASONRY - PART 2: DETERMINATION OF FLEXURAL STRENGTH
I.S. EN 14944-1:2006 INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 1: INFLUENCE OF FACTORY MADE CEMENTITIOUS PRODUCTS ON ORGANOLEPTIC PARAMETERS
10/30212141 DC : 0 BS EN 846-14 - METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 14: LINTELS
UNI EN 846-14 : 2012 METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 14: DETERMINATION OF THE INITIAL SHEAR STRENGTH BETWEEN THE PREFABRICATED PART OF A COMPOSITE LINTEL AND THE MASONRY ABOVE IT
02/102876 DC : DRAFT APR 2002 PREN 1052-5 - METHODS OF TEST FOR MASONRY - PART 5: DETERMINATION OF BOND STRENGTH BY THE BOND WRENCH METHOD
DIN EN 934-3:2012-09 Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity and marking and labelling (includes Amendment A1:2012)
DIN EN 1015-10:2007-05 Methods of test for mortar for masonry - Part 10: Determination of dry bulk density of hardened mortar (includes Amendment A1:2006)
BS EN 772-1 : 2011 METHODS OF TEST FOR MASONRY UNITS - PART 1: DETERMINATION OF COMPRESSIVE STRENGTH
BS EN 13084-5:2005 Free-standing chimneys Material for brick liners. Product specifications
BS EN 1052-5:2005 Methods of test for masonry Determination of bond strength by the bond wrench method
I.S. EN 772-1:2011 METHODS OF TEST FOR MASONRY UNITS - PART 1: DETERMINATION OF COMPRESSIVE STRENGTH
DIN EN 1996-1-1:2013-02 Eurocode 6: Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures (includes Amendment 1:2012)
DIN EN 1052-5:2005-06 Methods of test for masonry - Part 5: Determination of bond strength by the bond wrench method
DIN EN 1052-3:2007-06 Methods of test for masonry - Part 3: Determination of initial shear strength (includes Amendment A1:2007)
I.S. EN 846-7:2012 METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 7: DETERMINATION OF SHEAR LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF SHEAR TIES AND SLIP TIES (COUPLET TEST FOR MORTAR JOINT CONNECTIONS)
I.S. EN 1052-2:2016 METHODS OF TEST FOR MASONRY - PART 2: DETERMINATION OF FLEXURAL STRENGTH
DIN EN 772-1:2000-09 METHODS OF TEST FOR MASONRY UNITS - PART 1: DETERMINATION OF COMPRESSIVE STRENGTH
I.S. EN 998-1:2016 SPECIFICATION FOR MORTAR FOR MASONRY - PART 1: RENDERING AND PLASTERING MORTAR
I.S. EN 998-2:2016 SPECIFICATION FOR MORTAR FOR MASONRY - PART 2: MASONRY MORTAR
I.S. EN 846-9:2016 METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 9: DETERMINATION OF FLEXURAL RESISTANCE AND SHEAR RESISTANCE OF LINTELS
I.S. EN 846-5:2012 METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 5: DETERMINATION OF TENSILE AND COMPRESSIVE LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF WALL TIES (COUPLET TEST)
I.S. EN 1015-12:2016 METHODS OF TEST FOR MORTAR FOR MASONRY - PART 12: DETERMINATION OF ADHESIVE STRENGTH OF HARDENED RENDERING AND PLASTERING MORTARS ON SUBSTRATES
DIN EN 1052-2:2016-08 METHODS OF TEST FOR MASONRY - PART 2: DETERMINATION OF FLEXURAL STRENGTH
I.S. EN 934-3:2009 ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 3: ADMIXTURES FOR MASONRY MORTAR - DEFINITIONS, REQUIREMENTS, CONFORMITY AND MARKING AND LABELLING
I.S. EN 1996-1-1:2005 EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-1: GENERAL RULES FOR REINFORCED AND UNREINFORCED MASONRY STRUCTURES (INCLUDING IRISH NATIONAL ANNEX)
I.S. EN 1744-1:2009 TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS
I.S. EN 1996-2:2006 EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 2: DESIGN CONSIDERATIONS, SELECTION OF MATERIALS AND EXECUTION OF MASONRY (INCLUDING IRISH NATIONAL ANNEX)
93/102674 DC : 0 PREN 1015-13 - METHODS OF TEST FOR MORTAR FOR MASONRY - PART 13: DETERMINATION OF DIMENSIONAL STABILITY OF HARDENED MORTARS
DIN EN 846-14:2012-11 METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 14: DETERMINATION OF THE INITIAL SHEAR STRENGTH BETWEEN THE PREFABRICATED PART OF A COMPOSITE LINTEL AND THE MASONRY ABOVE IT
09/30180272 DC : 0 BS EN 934-3 - ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 3: ADMIXTURES FOR MASONRY MORTAR - DEFINITIONS, REQUIREMENTS, CONFORMITY, MARKING AND LABELLING
DIN EN 14944-3:2015-06 (Draft) INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 3: MIGRATION OF SUBSTANCES FROM FACTORY-MADE CEMENTITIOUS PRODUCTS
DIN EN 1744-1:2013-03 TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS
DIN EN 13084-5:2005-12 Free-standing chimneys - Part 5: Material for brick liners - Product specifications
DIN EN 1996-2:2010-12 Eurocode 6: Design of masonry structures - Part 2: Design considerations, selection of materials and execution of masonry (includes Corrigendum AC:2009)
DIN EN 1996-3:2010-12 Eurocode 6: Design of masonry structures - Part 3: Simplified calculation methods for unreinforced masonry structures (includes Corrigendum AC:2009)
BS EN 1052-4:2000 Methods of test for masonry Determination of shear strength including damp proof course
BS EN 846-9:2016 Methods of test for ancillary components for masonry Determination of flexural resistance and shear resistance of lintels
DIN EN 14944-3:2009-01 Influence of cementitious products on water intended for human consumption - Test methods - Part 3: Migration of substances from factory-made cementitious products
UNE-EN 846-5:2013 Methods of test for ancillary components for masonry - Part 5: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couplet test)
EN 772-6 : 2001 Methods of test for masonry units - Part 6: Determination of bending tensile strength of aggregate concrete masonry units
UNI EN 13084-5 : 2005 FREE-STANDING CHIMNEYS - PART 5: MATERIAL FOR BRICK LINERS - PRODUCT SPECIFICATIONS
UNI EN 1744-1 : 2013 TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS
UNI EN 846-7 : 2012 METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 7: DETERMINATION OF SHEAR LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF SHEAR TIES AND SLIP TIES (COUPLET TEST FOR MORTAR JOINT CONNECTIONS)
UNI EN 846-5 : 2012 METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 5: DETERMINATION OF TENSILE AND COMPRESSIVE LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF WALL TIES (COUPLET TEST)
UNI EN 1052-4 : 2001 METHODS OF TEST FOR MASONRY - DETERMINATION OF SHEAR STRENGTH INCLUDING DAMP PROOF COURSE
UNI EN 1996-2 : 2006 EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 2: DESIGN CONSIDERATIONS, SELECTION OF MATERIALS AND EXECUTION OF MASONRY
UNI EN 934-3 : 2012 ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 3: ADMIXTURES FOR MASONRY MORTAR - DEFINITIONS, REQUIREMENTS, CONFORMITY AND MARKING AND LABELLING
UNI EN 1996-1-1 : 2013 EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-1: GENERAL RULES FOR REINFORCED AND UNREINFORCED MASONRY STRUCTURES
I.S. EN 1996-3:2006 EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 3: SIMPLIFIED CALCULATION METHODS FOR UNREINFORCED MASONRY STRUCTURES (INCLUDING IRISH NATIONAL ANNEX)
10/30211862 DC : 0 BS EN 998-1 - SPECIFICATION FOR MORTAR FOR MASONRY - PART 1: RENDERING AND PLASTERING MORTAR
04/30083253 DC : DRAFT MAY 2004 EN 14944-1 - INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 1: INFLUENCE OF FACTORY MADE CEMENTITIOUS PRODUCTS ON ORGANOLEPTIC PARAMETERS
I.S. EN 846-14:2012 METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 14: DETERMINATION OF THE INITIAL SHEAR STRENGTH BETWEEN THE PREFABRICATED PART OF A COMPOSITE LINTEL AND THE MASONRY ABOVE IT
15/30324901 DC : 0 BS EN 1504-3 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 3: REPAIR CONCRETE AND MORTARS
DIN EN 998-1:2015-11 (Draft) SPECIFICATION FOR MORTAR FOR MASONRY - PART 1: RENDERING AND PLASTERING MORTAR
BS EN 1744-1 : 2009 TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS
BS EN 1052-2:2016 Methods of test for masonry Determination of flexural strength
UNE-EN 1015-12:2016 Methods of test for mortar for masonry - Part 12: Determination of adhesive strength of hardened rendering and plastering mortars on substrates
UNE-EN 1744-1:2010 Tests for chemical properties of aggregates - Part 1: Chemical analysis
BS EN 772-6:2001 Methods of test for masonry units Determination of bending tensile strength of aggregate concrete masonry units
BS EN 846-5:2012 Methods of test for ancillary components for masonry Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couplet test)
BS EN 1996-1-1 : 2005 EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-1: GENERAL RULES FOR REINFORCED AND UNREINFORCED MASONRY STRUCTURES
DIN EN 14944-1:2006-07 Influence of cementitious products on water intended for human consumption - Test methods - Part 1: Influence of factory made cementitious products on organoleptic parameters
BS EN 934-3 : 2009 ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 3: ADMIXTURES FOR MASONRY MORTAR - DEFINITIONS, REQUIREMENTS, CONFORMITY AND MARKING AND LABELLING
BS EN 846-7:2012 Methods of test for ancillary components for masonry Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections)
UNE-EN 846-7:2015 Methods of test for ancillary components for masonry - Part 7: Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections)
UNE-EN 998-2:2012 Specification for mortar for masonry - Part 2: Masonry mortar
EN 772-1:2011+A1:2015 Methods of test for masonry units - Part 1: Determination of compressive strength
EN 998-1:2016 Specification for mortar for masonry - Part 1: Rendering and plastering mortar
EN 846-7:2012 Methods of test for ancillary components for masonry - Part 7: Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections)
EN 1996-1-1:2005+A1:2012 Eurocode 6 - Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures
EN 1996-3:2006/AC:2009 EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 3: SIMPLIFIED CALCULATION METHODS FOR UNREINFORCED MASONRY STRUCTURES
EN 1744-1:2009+A1:2012 Tests for chemical properties of aggregates - Part 1: Chemical analysis
EN 1996-2:2006/AC:2009 EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 2: DESIGN CONSIDERATIONS, SELECTION OF MATERIALS AND EXECUTION OF MASONRY
EN 934-3:2009+A1:2012 Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity and marking and labelling
EN 846-5:2012 Methods of test for ancillary components for masonry - Part 5: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couplet test)
EN 14944-3:2007 Influence of cementitious products on water intended for human consumption - Test methods - Part 3: Migration of substances from factory-made cementititous products
EN 998-2:2016 Specification for mortar for masonry - Part 2: Masonry mortar
EN 14944-1:2006 Influence of cementitious products on water intended for human consumption - Test methods - Part 1: Influence of factory made cementitious products on organoleptic parameters
EN 846-14:2012 Methods of test for ancillary components for masonry - Part 14: Determination of the initial shear strength between the prefabricated part of a composite lintel and the masonry above it
EN 846-8:2000/A1:2006 METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 8: DETERMINATION OF LOAD CAPACITY AND LOAD-DEFLECTION CHARACTERISTICS OF JOIST HANGERS
EN 846-4:2001/A1:2004 METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 4: DETERMINATION OF LOAD CAPACITY AND LOAD-DEFLECTION CHARACTERISTICS OF STRAPS
EN 846-9:2016 Methods of test for ancillary components for masonry - Part 9: Determination of flexural resistance and shear resistance of lintels
PREN 14944-3 : DRAFT 2015 INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 3: MIGRATION OF SUBSTANCES FROM FACTORY-MADE CEMENTITIOUS PRODUCTS
PREN 14944-1 : DRAFT 2015 INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 1: INFLUENCE OF MIGRATION FROM FACTORY MADE CEMENTITIOUS PRODUCTS ON THE ORGANOLEPTIC PARAMETERS
UNE-EN 1996-1-1:2011 Eurocode 6 - Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures
BS EN 14944-3:2007 Influence of cementitious products on water intended for human consumption. Test methods Migration of substances from factory-made cementitious products
15/30317324 DC : 0 BS EN 14944-3 - INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 3: MIGRATION OF SUBSTANCES FROM FACTORY-MADE CEMENTITIOUS PRODUCTS
PREN 1504-3 : DRAFT 2015 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 3: REPAIR CONCRETE AND MORTARS
DIN EN 772-1:2016-05 METHODS OF TEST FOR MASONRY UNITS - PART 1: DETERMINATION OF COMPRESSIVE STRENGTH
DIN EN 14944-1:2015-06 (Draft) INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 1: INFLUENCE OF FACTORY MADE CEMENTITIOUS PRODUCTS ON ORGANOLEPTIC PARAMETERS
DIN EN 998-2:2015-11 (Draft) SPECIFICATION FOR MORTAR FOR MASONRY - PART 2: MASONRY MORTAR
BS EN 1015-10:1999 Methods of test for mortar for masonry Determination of dry bulk density of hardened mortar
BS EN 14944-1:2006 Influence of cementitious products on water intended for human consumption. Test methods Influence of factory made cementitious products on organoleptic parameters
BS EN 846-4:2002 Methods of test for ancillary components for masonry Determination of load capacity and load-deflection characteristics of straps
BS EN 1996-3:2006 Eurocode 6. Design of masonry structures Simplified calculation methods for unreinforced masonry structures
DIN EN 846-7:2012-11 METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 7: DETERMINATION OF SHEAR LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF SHEAR TIES AND SLIP TIES (COUPLET TEST FOR MORTAR JOINT CONNECTIONS)
EN 1015-10:1999/A1:2006 METHODS OF TEST FOR MORTAR FOR MASONRY - PART 10: DETERMINATION OF DRY BULK DENSITY OF HARDENED MORTAR
EN 1052-3:2002/A1:2007 METHODS OF TEST FOR MASONRY - PART 3: DETERMINATION OF INITIAL SHEAR STRENGTH
DIN EN 846-4:2005-01 Methods of test for ancillary components for masonry - Part 4: Determination of load capacity and load-deflection characteristics of straps
DIN EN 846-5:2012-11 METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 5: DETERMINATION OF TENSILE AND COMPRESSIVE LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF WALL TIES (COUPLET TEST)
UNE-EN 772-1:2011 Methods of test for masonry units - Part 1: Determination of compressive strength
ONORM EN 14944-1 : 2006 INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 1: INFLUENCE OF FACTORY MADE CEMENTITIOUS PRODUCTS ON ORGANOLEPTIC PARAMETERS
ONORM EN 14944-3 : 2008 INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 3: MIGRATION OF SUBSTANCES FROM FACTORY-MADE CEMENTITITOUS PRODUCTS
UNE-EN 934-3:2010 Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity and marking and labelling

EN 998-2:2016 Specification for mortar for masonry - Part 2: Masonry mortar
EN 1015-2:1998/A1:2006 METHODS OF TEST FOR MORTAR FOR MASONRY - PART 2: BULK SAMPLING OF MORTARS AND PREPARATION OF TEST MORTARS
ISO 468:1982 Surface roughness — Parameters, their values and general rules for specifying requirements
EN 1015-3:1999/A2:2006 METHODS OF TEST FOR MORTAR FOR MASONRY - PART 3: DETERMINATION OF CONSISTENCE OF FRESH MORTAR (BY FLOW TABLE)
EN 998-1:2016 Specification for mortar for masonry - Part 1: Rendering and plastering mortar

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.