• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 1097-5:2008

Current
Current

The latest, up-to-date edition.

Tests for mechanical and physical properties of aggregates - Part 5: Determination of the water content by drying in a ventilated oven
Published date

12-03-2008

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Apparatus
6 Preparation of test portion
7 Procedure
8 Calculation and expression of results
9 Test report
Annex A (normative) - Variations to the determination
                      of the water content by drying
                      in a ventilated oven for use
                      with lightweight aggregates
Annex B (informative) - Example of calculation of the water
                        content by drying in a ventilated oven
Annex C (informative) - Precision
Bibliography

This standard describes the reference method used for type testing and in cases of dispute for the determination of the water content of aggregates by drying in a ventilated oven. For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established.

Committee
CEN/TC 154
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

Standards Relationship
NF EN 1097-5 : 2008 Identical
NBN EN 1097-5 : 2008 Identical
PN EN 1097-5 : 2008 Identical
SN 670903-5B : 2008 Identical
NS EN 1097-5 : 2ED 2008 Identical
BS EN 1097-5:2008 Identical
UNE-EN 1097-5:2009 Identical
SN EN 1097-5 : 2008 Identical
UNI EN 1097-5 : 2008 Identical
DIN EN 1097-5:2008-06 Identical
I.S. EN 1097-5:2008 Identical
NEN EN 1097-5 : 2008 Identical

BS EN 15564:2008 Precast concrete products. Resin bound concrete. Requirements and test methods
DIN EN 1367-8 E : 2014 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF RESISTANCE TO DISINTEGRATION OF LIGHTWEIGHT AGGREGATES
BS EN 1097-11:2013 Tests for mechanical and physical properties of aggregates Determination of compressibility and confined compressive strength of lightweight aggregates
I.S. EN 13055-2:2004 LIGHTWEIGHT AGGREGATES - PART 2: LIGHTWEIGHT AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS AND FOR UNBOUND AND BOUND APPLICATIONS
BS EN 1367-7:2014 Tests for thermal and weathering properties of aggregates Determination of resistance to freezing and thawing of Lightweight aggregates
PD CEN/TR 15310-4:2006 Characterization of waste. Sampling of waste materials Guidance on procedures for sample packaging, storage, preservation, transport and delivery
02/102929 DC : 0 PREN 14440 - SLURRY SURFACING - FACTORY PRODUCTION CONTROL
DIN EN 15732:2013-01 LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA)
06/30155785 DC : 0 BS EN 15564 - PRECAST CONCRETE PRODUCTS - RESIN BOUND CONCRETE - REQUIREMENTS AND TEST METHODS
BS EN 15732:2012 Light weight fill and thermal insulation products for civil engineering applications (CEA). Expanded clay lightweight aggregate products (LWA)
PREN 12697-32 : DRAFT 2017 BITUMINOUS MIXTURES - TEST METHODS - PART 32: LABORATORY COMPACTION OF BITUMINOUS MIXTURES BY VIBRATORY COMPACTOR
UNE-EN 1367-8:2015 Tests for thermal and weathering properties of aggregates - Part 8: Determination of resistance to disintegration of Lightweight Aggregates
UNI EN 12273 : 2008 SLURRY SURFACING - REQUIREMENTS
17/30366933 DC : 0 BS EN 12697-32 - BITUMINOUS MIXTURES - TEST METHODS - PART 32: LABORATORY COMPACTION OF BITUMINOUS MIXTURES BY VIBRATORY COMPACTOR
I.S. EN 12273:2008 SLURRY SURFACING - REQUIREMENTS
PREN 13383-2 : DRAFT 2017 ARMOURSTONE - PART 2: TEST METHODS
UNE-EN 14063-2:2015 Thermal insulation products for buildings - In-situ formed expanded clay lightweight aggregate products - Part 2: Specification for the installed products
UNI EN 15732 : 2012 LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA)
DIN EN 933-8:2015-07 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 8: ASSESSMENT OF FINES - SAND EQUIVALENT TEST
DIN EN 13286-47:2012-07 Unbound and hydraulically bound mixtures - Part 47: Test method for the determination of California bearing ratio, immediate bearing index and linear swelling
DIN EN 13286-2:2013-02 Unbound and hydraulically bound mixtures - Part 2: Test methods for laboratory reference density and water content - Proctor compaction (includes Corrigendum :2012)
BS EN 13043:2013 Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas
DIN EN 13286-46:2003-07 UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 46: TEST METHOD FOR THE DETERMINATION OF THE MOISTURE CONDITION VALUE
EN 1097-11:2013 Tests for mechanical and physical properties of aggregates - Part 11: Determination of compressibility and confined compressive strength of lightweight aggregates
EN 1097-10:2014 Tests for mechanical and physical properties of aggregates - Part 10: Determination of water suction height
I.S. EN 13286-1:2003 UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 1: TEST METHODS FOR LABORATORY REFERENCE DENSITY AND WATER CONTENT - INTRODUCTION, GENERAL REQUIREMENTS AND SAMPLING
I.S. EN 13286-4:2003 UNBOUND AND HYDRAULICALLY BOUND MIXTURES - TEST METHODS FOR LABORATORY REFERENCE DENSITY AND WATER CONTENT - PART 4: VIBRATING HAMMER
EN 12697-35:2016 Bituminous mixtures - Test methods - Part 35: Laboratory mixing
EN 13286-47:2012 Unbound and hydraulically bound mixtures - Part 47: Test method for the determination of California bearing ratio, immediate bearing index and linear swelling
CEN/TR 15310-4 : 2006 CHARACTERIZATION OF WASTE - SAMPLING OF WASTE MATERIALS - PART 4: GUIDANCE ON PROCEDURES FOR SAMPLE PACKAGING, STORAGE, PRESERVATION, TRANSPORT AND DELIVERY
EN 12273:2008 Slurry surfacing - Requirements
EN 13055-1:2002/AC:2004 LIGHTWEIGHT AGGREGATES - PART 1: LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR AND GROUT
EN 13383-2:2013 Armourstone - Part 2: Test methods
EN 13055-2:2004 Lightweight aggregates - Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications
EN 13043:2002/AC:2004 AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS
UNI EN 13286-47 : 2012 UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 47: TEST METHOD FOR THE DETERMINATION OF CALIFORNIA BEARING RATIO, IMMEDIATE BEARING INDEX AND LINEAR SWELLING
EN 13286-4:2003 UNBOUND AND HYDRAULICALLY BOUND MIXTURES - TEST METHODS FOR LABORATORY REFERENCE DENSITY AND WATER CONTENT - PART 4: VIBRATING HAMMER
PREN 16236 : DRAFT 2015 EVALUATION OF CONFORMITY OF AGGREGATES - INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL
I.S. EN 12274-5:2018 SLURRY SURFACING - TEST METHOD - PART 5: DETERMINATION OF THE MINIMUM BINDER CONTENT AND WEARING RESISTANCE
DIN EN 15564 E : 2009 PRECAST CONCRETE PRODUCTS - RESIN BOUND CONCRETE - REQUIREMENTS AND TEST METHODS
DIN EN 1367-7:2014-07 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING OF LIGHTWEIGHT AGGREGATES
12/30256420 DC : 0 BS EN 15732 - LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA)
PREN 12697-35 : DRAFT 2014 BITUMINOUS MIXTURES - TEST METHODS - PART 35: LABORATORY MIXING
S.R. CEN TS 12390-10:2007 TESTING HARDENED CONCRETE - PART 10: DETERMINATION OF THE RELATIVE CARBONATION RESISTANCE OF CONCRETE
12/30256925 DC : 0 BS EN 13055 - LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR, GROUT, BITUMINOUS MIXTURES, SURFACE TREATMENTS AND FOR UNBOUND AND BOUND APPLICATIONS
09/30195711 DC : 0 BS EN 13383-2 - ARMOURSTONE - PART 2: TEST METHODS
BS EN 12273:2008 Slurry surfacing. Requirements
PREN 15732 : DRAFT 2012 LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA)
DIN 4226-2:2002-02 AGGREGATES FOR CONCRETE AND MORTAR - PART 2: LIGHTWEIGHT AGGREGATES
I.S. EN 13055:2016 LIGHTWEIGHT AGGREGATES
UNI EN 1367-7 : 2014 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING OF LIGHTWEIGHT AGGREGATES
I.S. EN 1097-11:2013 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 11: DETERMINATION OF COMPRESSIBILITY AND CONFINED COMPRESSIVE STRENGTH OF LIGHTWEIGHT AGGREGATES
S.R. CWA 15846:2008 MEASURING METHOD FOR DYNAMIC COMPACTNESS & BEARING CAPACITY WITH SP-LFWD (SMALL - PLATE LIGHT FALLING WEIGHT DEFLECTOMETER)
EN 13286-2:2010/AC:2012 UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 2: TEST METHODS FOR LABORATORY REFERENCE DENSITY AND WATER CONTENT - PROCTOR COMPACTION
BS EN 13055-2:2004 Lightweight aggregates Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications
BS EN 13286-1:2003 Unbound and hydraulically bound mixtures Test methods for laboratory reference density and water content. Introduction, general requirements and sampling
I.S. EN 13286-2:2010 UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 2: TEST METHODS FOR LABORATORY REFERENCE DENSITY AND WATER CONTENT - PROCTOR COMPACTION
I.S. EN 933-8:2012 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 8: ASSESSMENT OF FINES - SAND EQUIVALENT TEST
I.S. EN 13286-47:2012 UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 47: TEST METHOD FOR THE DETERMINATION OF CALIFORNIA BEARING RATIO, IMMEDIATE BEARING INDEX AND LINEAR SWELLING
I.S. EN 12697-35:2016 BITUMINOUS MIXTURES - TEST METHODS - PART 35: LABORATORY MIXING
DIN EN 1367-8:2014-07 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF RESISTANCE TO DISINTEGRATION OF LIGHTWEIGHT AGGREGATES
DIN EN 1097-11 E : 2013 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 11: DETERMINATION OF COMPRESSIBILITY AND CONFINED COMPRESSIVE STRENGTH OF LIGHTWEIGHT AGGREGATES
BS EN 13055:2016 Lightweight aggregates
DIN EN 1097-11:2013-11 Tests for mechanical and physical properties of aggregates - Part 11: Determination of compressibility and confined compressive strength of lightweight aggregates
I.S. EN 13055-1:2002 LIGHTWEIGHT AGGREGATES - PART 1: LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR AND GROUT
UNI EN 15564 : 2009 PRECAST CONCRETE PRODUCTS - RESIN BOUND CONCRETE - REQUIREMENTS AND TEST METHODS
06/30149762 DC : 0 EN 12273 - SLURRY SURFACING - SPECIFICATIONS
UNI EN 1097-11 : 2013 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 11: DETERMINATION OF COMPRESSIBILITY AND CONFINED COMPRESSIVE STRENGTH OF LIGHTWEIGHT AGGREGATES
UNI EN 1367-8 : 2014 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF RESISTANCE TO DISINTEGRATION OF LIGHTWEIGHT AGGREGATES
DIN EN 14063-2:2013-10 THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED PRODUCTS
DD CEN/TS 12390-10:2007 Testing hardened concrete Determination of the relative carbonation resistance of concrete
I.S. EN 15732:2012 LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA)
EN 12274-3:2018 Slurry surfacing - Test methods - Part 3: Consistency
13/30288546 DC : 0 BS EN 12697-32 - BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 32: LABORATORY COMPACTION OF BITUMINOUS MIXTURES BY VIBRATORY COMPACTOR
DIN EN 1097-10:2014-09 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 10: DETERMINATION OF WATER SUCTION HEIGHT
UNE-EN 13286-2:2011 Unbound and hydraulically bound mixtures - Part 2: Test methods for laboratory reference density and water content - Proctor compaction
BS EN 13383-2:2013 Armourstone Test methods
UNE-EN 12697-35:2017 Bituminous mixtures - Test methods - Part 35: Laboratory mixing
BS EN 13286-4:2003 Unbound and hydraulically bound mixtures Test methods for laboratory reference density and water content. Vibrating hammer
UNE-EN 13286-47:2012 Unbound and hydraulically bound mixtures - Part 47: Test method for the determination of California bearing ratio, immediate bearing index and linear swelling
EEMUA 207 : 2009 DOUBLE CONCRETE TANKS FOR LIQUEFIED GAS - GUIDE TO DESIGN, CONSTRUCTION AND OPERATION
UNI EN 14063-1 : 2005 THERMAL INSULATION MATERIALS AND PRODUCTS - IN-SITU FORMED EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) - PART 1: SPECIFICATION FOR THE LOOSE-FILL PRODUCTS BEFORE INSTALLATION
UNI EN 13043 : 2013 AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS
UNI EN 1097-10 : 2014 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 10: DETERMINATION OF WATER SUCTION HEIGHT
I.S. EN 13043:2013 AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS
UNI EN 13286-2 : 2010 UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 2: TEST METHODS FOR LABORATORY REFERENCE DENSITY AND WATER CONTENT - PROCTOR COMPACTION
UNI EN 13383-2 : 2013 ARMOURSTONE - PART 2: TEST METHODS
UNE-EN 1097-11:2013 Tests for mechanical and physical properties of aggregates - Part 11: Determination of compressibility and confined compressive strength of lightweight aggregates
BS EN 1367-8:2014 Tests for thermal and weathering properties of aggregates Determination of resistance to disintegration of Lightweight Aggregates
BS EN 14063-2:2013 Thermal insulation products for buildings. In-situ formed expanded clay lightweight aggregate products Specification for the installed products
14/30310361 DC : 0 BS EN 12697-35 - BITUMINOUS MIXTURES - TEST METHODS - PART 35: LABORATORY MIXING
DIN EN 1367-7 E : 2014 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING OF LIGHTWEIGHT AGGREGATES
PREN 14063-2 : DRAFT 2012 THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED PRODUCTS
07/30170936 DC : 0 BS EN 15732 - LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA)
DIN EN 15564:2009-05 PRECAST CONCRETE PRODUCTS - RESIN BOUND CONCRETE - REQUIREMENTS AND TEST METHODS
PREN 13043 : DRAFT 2015 AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS
15/30311106 DC : 0 BS EN 16236 - EVALUATION OF CONFORMITY OF AGGREGATES - INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL
15/30326284 DC : 0 BS EN 16907-2 - EARTHWORKS - PART 2: CLASSIFICATION OF MATERIALS
I.S. EN 12274-3:2018 SLURRY SURFACING - TEST METHODS - PART 3: CONSISTENCY
I.S. CEN TR 15310-4:2006 CHARACTERIZATION OF WASTE - SAMPLING OF WASTE MATERIALS - PART 4: GUIDANCE ON PROCEDURES FOR SAMPLE PACKAGING, STORAGE, PRESERVATION, TRANSPORT AND DELIVERY
I.S. EN 15564:2008 PRECAST CONCRETE PRODUCTS - RESIN BOUND CONCRETE - REQUIREMENTS AND TEST METHODS
DIN EN 14063-1:2016-10 (Draft) Thermal insulation products for buildings - In-situ formed expanded clay lightweight aggregate products - Part 1: Specification for the loose-fill products before installation; German and English version prEN 14063-1:2016
BS EN 13286-2:2010 Unbound and hydraulically bound mixtures Test methods for laboratory reference density and water content. Proctor compaction
BS EN 12697-35:2004 Bituminous mixtures. Test methods for hot mix asphalt Laboratory mixing
BS EN 13055-1:2002 Lightweight aggregates Lightweight aggregates for concrete, mortar and grout
BS EN 13286-46:2003 Unbound and hydraulically bound mixtures Test method for the determination of the moisture condition value
BS EN 933-8 : 2012 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 8: ASSESSMENT OF FINES - SAND EQUIVALENT TEST
EN 14063-1:2004/AC:2006 THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS - PART 1: SPECIFICATION FOR THE LOOSE-FILL PRODUCTS BEFORE INSTALLATION
EN 14063-2:2013 Thermal insulation products for buildings - In-situ formed expanded clay lightweight aggregate products - Part 2: Specification for the installed products
EN 1367-7:2014 Tests for thermal and weathering properties of aggregates - Part 7: Determination of resistance to freezing and thawing of Lightweight aggregates
EN 933-8:2012+A1:2015 Tests for geometrical properties of aggregates - Part 8: Assessment of fines - Sand equivalent test
EN 1367-8:2014 Tests for thermal and weathering properties of aggregates - Part 8: Determination of resistance to disintegration of Lightweight Aggregates
EN 15732:2012 Light weight fill and thermal insulation products for civil engineering applications (CEA) - Expanded clay lightweight aggregate products (LWA)
EN 1744-3:2002 Tests for chemical properties of aggregates - Part 3: Preparation of eluates by leaching of aggregates
EN 15564:2008 Precast concrete products - Resin bound concrete - Requirements and test methods
UNE-EN 15732:2014 Light weight fill and thermal insulation products for civil engineering applications (CEA) - Expanded clay lightweight aggregate products (LWA)
17/30345777 DC : 0 BS EN 13383-2 - ARMOURSTONE - PART 2: TEST METHODS
18/30368684 DC : 0 BS EN 12697-55 - BITUMINOUS MIXTURES - TEST METHODS - PART 55: ORGANOLEPTIC ASSESSMENT OF COMPATIBILITY OF CONSTITUENT MATERIALS OF A MIXTURE WITH BITUMEN EMULSION
I.S. EN 1367-8:2014 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF RESISTANCE TO DISINTEGRATION OF LIGHTWEIGHT AGGREGATES
11/30249131 DC : 0 BS EN 16333 - SLURRY SURFACING - SPECIFICATION FOR AIRFIELDS
DIN EN 12273:2008-08 Slurry surfacing - Requirements
12/30258114 DC : 0 BS EN 14063-2 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED PRODUCTS
DIN EN 15732 E : 2013 LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA)
UNI EN 14063-2 : 2013 THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED PRODUCTS
I.S. EN 14063-2:2013 THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED PRODUCTS
UNE-EN 1367-7:2015 Tests for thermal and weathering properties of aggregates - Part 7: Determination of resistance to freezing and thawing of Lightweight aggregates
I.S. EN 1367-7:2014 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING OF LIGHTWEIGHT AGGREGATES
CEN/TS 12390-10:2007 Testing hardened concrete - Part 10: Determination of the relative carbonation resistance of concrete
PREN 12697-55 : DRAFT 2018 BITUMINOUS MIXTURES - TEST METHODS - PART 55: ORGANOLEPTIC ASSESSMENT OF COMPATIBILITY OF CONSTITUENT MATERIALS OF A MIXTURE WITH BITUMEN EMULSION
EN 12274-5:2018 Slurry surfacing - Test method - Part 5: Determination of the minimum binder content and wearing resistance
BS EN 1744-3:2002 Tests for chemical properties of aggregates Preparation of eluates by leaching of aggregates
BS EN 13286-47:2012 Unbound and hydraulically bound mixtures Test method for the determination of California bearing ratio, immediate bearing index and linear swelling
BS EN 1097-10:2014 Tests for mechanical and physical properties of aggregates Determination of water suction height
BS EN 14063-1:2004 Thermal insulation products for buildings. In-situ formed expanded clay lightweight aggregate products Specification for the loose-fill products before installation
BS EN 13286-5:2003 Unbound and hydraulically bound mixtures Test methods for laboratory reference density and water content. Vibrating table
UNE-EN 1097-10:2015 Tests for mechanical and physical properties of aggregates - Part 10: Determination of water suction height
EN 13286-5:2003 Unbound and hydraulically bound mixtures - Part 5: Test methods for laboratory reference density and water content - Vibrating table
EN 13055 : 2016 LIGHTWEIGHT AGGREGATES
EN 13286-46:2003 Unbound and hydraulically bound mixtures - Part 46: Test method for the determination of the moisture condition value
DIN EN 13055-2:2004-09 LIGHTWEIGHT AGGREGATES - PART 2: LIGHTWEIGHT AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS AND FOR UNBOUND AND BOUND APPLICATIONS
DIN EN 13055-1:2002-08 LIGHTWEIGHT AGGREGATES - PART 1: LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR AND GROUT
DIN EN 1097-10:2003-03 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 10: DETERMINATION OF WATER SUCTION HEIGHT
DIN EN 14063-1:2004-11 Thermal insulation materials and products - In-situ formed expanded clay lightweight aggregate products (LWA) - Part 1: Specification for the loose-fill products before installation; German version EN 14063-1:2004
I.S. EN 1097-10:2014 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 10: DETERMINATION OF WATER SUCTION HEIGHT
EN 13286-1:2003 UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 1: TEST METHODS FOR LABORATORY REFERENCE DENSITY AND WATER CONTENT - INTRODUCTION, GENERAL REQUIREMENTS AND SAMPLING

EN 932-2:1999 Tests for general properties of aggregates - Part 2: Methods for reducing laboratory samples
BS 812-109:1990 Testing aggregates Methods for determination of moisture content
EN 932-5:2012/AC:2014 TESTS FOR GENERAL PROPERTIES OF AGGREGATES - PART 5: COMMON EQUIPMENT AND CALIBRATION
ISO 6783:1982 Coarse aggregates for concrete Determination of particle density and water absorption Hydrostatic balance method
EN 932-6:1999 Tests for general properties of aggregates - Part 6: Definitions of repeatability and reproducibility

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.