• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 12390-2:2009

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Testing hardened concrete - Part 2: Making and curing specimens for strength tests

Superseded date

26-06-2019

Published date

08-04-2009

Foreword
1 Scope
2 Normative references
3 Apparatus
4 Sampling
5 Procedures
6 Report

This European Standard specifies methods for making and curing test specimens for strength tests. It coversthe preparation and filling of moulds, compaction of the concrete, levelling the surface, curing of testspecimens and transporting test specimens.

Committee
CEN/TC 104
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Superseded
SupersededBy

DIN EN 12390-11 E : 2015 TESTING HARDENED CONCRETE - PART 11: DETERMINATION OF THE CHLORIDE RESISTANCE OF CONCRETE, UNIDIRECTIONAL DIFFUSION
17/30360072 DC : 0 BS EN 12390-5 - TESTING HARDENED CONCRETE - PART 5: FLEXURAL STRENGTH OF TEST SPECIMENS
S.R. CEN/TR 15678:2008 CONCRETE - RELEASE OF REGULATED DANGEROUS SUBSTANCES INTO SOIL, GROUNDWATER AND SURFACE WATER - TEST METHOD FOR NEW OR UNAPPROVED CONSTITUENTS OF CONCRETE AND FOR PRODUCTION CONCRETES
PD CEN/TR 15678:2008 Concrete. Release of regulated dangerous substances into soil, groundwater and surface water. Test method for new or unapproved constituents of concrete and for production concretes
17/30354239 DC : 0 BS EN 13369 - COMMON RULES FOR PRECAST CONCRETE PRODUCTS
DIN EN 12390-11:2015-11 TESTING HARDENED CONCRETE - PART 11: DETERMINATION OF THE CHLORIDE RESISTANCE OF CONCRETE
I.S. EN 480-15:2013 ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - TEST METHODS - PART 15: REFERENCE CONCRETE AND METHOD FOR TESTING VISCOSITY MODIFYING ADMIXTURES
BS EN 1504-10:2017 Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Site application of products and systems and quality control of the works
17/30351884 DC : 0 BS EN 12390-10 - TESTING HARDENED CONCRETE - PART 10: DETERMINATION OF THE CARBONATION RESISTANCE OF CONCRETE AT ATMOSPHERIC LEVELS OF CARBON DIOXIDE
05/30131382 DC : DRAFT MAR 2005 BS EN 15184 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - SHEAR ADHESION COATED STEEL TO CONCRETE (PULL-OUT TEST)
03/302295 DC : DRAFT APR 2003 EN 14651 - PRECAST CONCRETE PRODUCTS - TEST METHOD FOR METALLIC FIBER CONCRETE - MEASURING THE FLEXURAL TENSILE STRENGTH
EN 12504-4:2004 Testing concrete - Part 4: Determination of ultrasonic pulse velocity
ONORM EN 12390-5 : 2009 TESTING HARDENED CONCRETE - PART 5: FLEXURAL STRENGTH OF TEST SPECIMENS
S.R. CEN TS 1992-4-1:2009 DESIGN OF FASTENINGS FOR USE IN CONCRETE - PART 4-1: GENERAL
EN 12390-13:2013 Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression
I.S. EN ISO 21809-5:2017 PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS (ISO 21809-5:2017)
BS EN 206 : 2013 CONCRETE - SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY
DD CEN/TS 1992-4-1:2009 Design of fastenings for use in concrete General
S.R. CEN/TR 16563:2013 PRINCIPLES OF THE EQUIVALENT DURABILITY PROCEDURE
15/30317321 DC : 0 BS EN 14944-1 - INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 1: INFLUENCE OF MIGRATION FROM FACTORY MADE CEMENTITIOUS PRODUCTS ON THE ORGANOLEPTIC PARAMETERS
I.S. EN 12390-8:2009 TESTING HARDENED CONCRETE - PART 8: DEPTH OF PENETRATION OF WATER UNDER PRESSURE
BS EN 13791:2007 Assessment of in-situ compressive strength in structures and pre-cast concrete components
BS EN 13877-1:2013 Concrete pavements Materials
UNE-EN 13877-2:2013 Concrete pavements - Part 2: Functional requirements for concrete pavements
PD CEN/TR 15177:2006 Testing the freeze-thaw resistance of concrete. Internal structural damage
BS EN 12390-8:2009 Testing hardened concrete Depth of penetration of water under pressure
DIN EN 1881:2007-01 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - TESTING OF ANCHORING PRODUCTS BY THE PULL-OUT METHOD
CEN/TS 1992-4-1:2009 Design of fastenings for use in concrete - Part 4-1: General
EN 12390-3:2009/AC:2011 TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS
DIN EN 14891:2017-05 LIQUID APPLIED WATER IMPERMEABLE PRODUCTS FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, ASSESSMENT AND VERIFICATION OF CONSTANCY OF PERFORMANCE, CLASSIFICATION AND MARKING
DIN EN 14651:2007-12 TEST METHOD FOR METALLIC FIBERED CONCRETE - MEASURING THE FLEXURAL TENSILE STRENGTH (LIMIT OF PROPORTIONALITY (LOP), RESIDUAL)
EN 12390-5:2009 Testing hardened concrete - Part 5: Flexural strength of test specimens
DIN EN 12504-4:2004-12 Testing concrete in structures - Part 4: Determination of ultrasonic pulse velocity
CEN/TR 15177:2006 Testing the freeze-thaw resistance of concrete - Internal structural damage
CEN/TS 12390-9:2016 Testing hardened concrete - Part 9: Freeze-thaw resistance with de-icing salts - Scaling
CEN/TR 16563:2013 Principles of the equivalent durability procedure
EN 12390-11:2015 Testing hardened concrete - Part 11: Determination of the chloride resistance of concrete, unidirectional diffusion
EN 1354:2005 Determination of compressive strength of lightweight aggregate concrete with open structure
EN 1168:2005+A3:2011 Precast concrete products - Hollow core slabs
EN 12390-8:2009 Testing hardened concrete - Part 8: Depth of penetration of water under pressure
I.S. EN 14944-1:2006 INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 1: INFLUENCE OF FACTORY MADE CEMENTITIOUS PRODUCTS ON ORGANOLEPTIC PARAMETERS
UNI EN 480-15 : 2013 ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - TEST METHODS - PART 15: REFERENCE CONCRETE AND METHOD FOR TESTING VISCOSITY MODIFYING ADMIXTURES
12/30259409 DC : 0 BS EN 12390-13 - TESTING HARDENED CONCRETE - PART 13: DETERMINATION OF SECANT MODULUS OF ELASTICITY IN COMPRESSION
16/30338749 DC : 0 BS EN ISO 21809-5 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS
BS EN 480-15:2013 Admixtures for concrete, mortar and grout. Test methods Reference concrete and method for testing viscosity modifying admixtures
BS EN 12390-11:2015 Testing hardened concrete Determination of the chloride resistance of concrete, unidirectional diffusion
S.R. CEN TS 12390-10:2007 TESTING HARDENED CONCRETE - PART 10: DETERMINATION OF THE RELATIVE CARBONATION RESISTANCE OF CONCRETE
I.S. EN 13791:2007 ASSESSMENT OF IN-SITU COMPRESSIVE STRENGTH IN STRUCTURES AND PRECAST CONCRETE COMPONENTS
DIN 1045-4:2012-02 Concrete, reinforced and prestressed concrete structures - Part 4: Additional rules for the production and the conformity of prefabricated elements
BS EN ISO 21809-5:2017 Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems External concrete coatings
11/30248435 DC : 0 BS EN 14891 - LIQUID-APPLIED WATER IMPERMEABLE PRODUCTS FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, EVALUATION OF CONFORMITY, CLASSIFICATION AND DESIGNATION
10/30218985 DC : DRAFT JUNE 2010 BS EN 13369 - COMMON RULES FOR PRECAST CONCRETE PRODUCTS
14/30314741 DC : 0 BS EN 14891 - LIQUID APPLIED WATER IMPERMEABLE PRODUCTS FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, EVALUATION OF CONFORMITY, CLASSIFICATION AND DESIGNATION
UNI CEN/TS 1992-4-1 : 2009 DESIGN OF FASTENINGS FOR USE IN CONCRETE - PART 4-1: GENERAL
BS EN 13369:2013 Common rules for precast concrete products
PREN 12390-17 : DRAFT 2018 TESTING HARDENED CONCRETE - PART 17: DETERMINATION OF CREEP OF CONCRETE IN COMPRESSION
PREN 12390-8 : DRAFT 2017 TESTING HARDENED CONCRETE - PART 8: DEPTH OF PENETRATION OF WATER UNDER PRESSURE
DIN EN 12839:2012-03 PRECAST CONCRETE PRODUCTS - ELEMENTS FOR FENCES
DIN EN 15184 E : 2006 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - SHEAR ADHESION OF COATED STEEL TO CONCRETE (PULL-OUT TEST)
DIN EN 14891 E : 2017 LIQUID APPLIED WATER IMPERMEABLE PRODUCTS FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, ASSESSMENT AND VERIFICATION OF CONSTANCY OF PERFORMANCE, CLASSIFICATION AND MARKING
DIN EN 14891:2015-02 (Draft) LIQUID APPLIED WATER IMPERMEABLE PRODUCTS FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, ASSESSMENT AND VERIFICATION OF CONSTANCY OF PERFORMANCE, CLASSIFICATION AND MARKING
BS EN 12839:2012 Precast concrete products. Elements for fences
BS EN 12618-3:2004 Products and systems for the protection and repair of concrete structures. Test methods Determination of the adhesion of injection products, with or without thermal cycling. Slant shear method
I.S. EN 1168:2005 PRECAST CONCRETE PRODUCTS - HOLLOW CORE SLABS
I.S. EN 13877-1:2013 CONCRETE PAVEMENTS - PART 1: MATERIALS
DIN EN 12390-3:2009-07 TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS
I.S. EN 13877-2:2013 CONCRETE PAVEMENTS - PART 2: FUNCTIONAL REQUIREMENTS FOR CONCRETE PAVEMENTS
I.S. EN 12390-6:2009 TESTING HARDENED CONCRETE - PART 6: TENSILE SPLITTING STRENGTH OF TEST SPECIMENS
DIN EN 12390-6:2010-09 Testing hardened concrete - Part 6: Tensile splitting strength of test specimens; German version EN 12390-6:2009
I.S. EN 480-1:2014 ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - TEST METHODS - PART 1: REFERENCE CONCRETE AND REFERENCE MORTAR FOR TESTING
I.S. EN 14651:2005 TEST METHOD FOR METALLIC FIBERED CONCRETE - MEASURING THE FLEXURAL TENSILE STRENGTH (LIMIT OF PROPORTIONALITY (LOP), RESIDUAL)
I.S. EN 1354:2005 DETERMINATION OF COMPRESSIVE STRENGTH OF LIGHTWEIGHT AGGREGATE CONCRETE WITH OPEN STRUCTURE
I.S. EN 14891:2017 LIQUID APPLIED WATER IMPERMEABLE PRODUCTS FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, ASSESSMENT AND VERIFICATION OF CONSTANCY OF PERFORMANCE, CLASSIFICATION AND MARKING
DIN EN 206-1:2001-07 CONCRETE - PART 1: SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY
UNI EN ISO 21809-5 : 2010 PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS
PREN 1504-10 : DRAFT 2015 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS
I.S. CEN TR 15177:2006 TESTING THE FREEZE-THAW RESISTANCE OF CONCRETE - INTERNAL STRUCTURAL DAMAGE
I.S. EN 206-1:2002 CONCRETE - PART 1: SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY (INCLUDING IRISH NATIONAL ANNEX)
XP CEN/TS 12390-11 : 2010 XP TESTING HARDENED CONCRETE - PART 11: DETERMINATION OF THE CHLORIDE RESISTANCE OF CONCRETE, UNIDIRECTIONAL DIFFUSION
15/30327977 DC : 0 BS EN 1504-10 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS
02/103093 DC : DRAFT APR 2002 BS 12390-9 - TESTING HARDENED CONCRETE - PART 9: FREEZE-THAW RESISTANCE - SCALING
DD CEN/TS 12390-11:2010 Testing hardened concrete Determination of the chloride resistance of concrete, unidirectional diffusion
DIN EN 480-15:2013-06 Admixtures for concrete, mortar and grout - Test methods - Part 15: Reference concrete and method for testing viscosity modifying admixtures
DIN 4093:2015-11 Design of strengthened soil - Set up by means of jet grouting, deep mixing or grouting
UNI EN 13369 : 2013 COMMON RULES FOR PRECAST CONCRETE PRODUCTS
DD CEN/TS 12390-10:2007 Testing hardened concrete Determination of the relative carbonation resistance of concrete
PREN 14891 : DRAFT 2014 LIQUID APPLIED WATER IMPERMEABLE PRODUCTS FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, EVALUATION OF CONFORMITY, CLASSIFICATION AND DESIGNATION
03/314375 DC : DRAFT DEC 2003 BS EN 14844 - PRECAST CONCRETE BOX CULVERTS
ONORM EN 12390-8 : 2009 TESTING HARDENED CONCRETE - PART 8: DEPTH OF PENETRATION OF WATER UNDER PRESSURE
DIN EN 14944-3:2015-06 (Draft) INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 3: MIGRATION OF SUBSTANCES FROM FACTORY-MADE CEMENTITIOUS PRODUCTS
I.S. EN 12390-11:2015 TESTING HARDENED CONCRETE - PART 11: DETERMINATION OF THE CHLORIDE RESISTANCE OF CONCRETE, UNIDIRECTIONAL DIFFUSION
DIN EN 13369:2013-08 COMMON RULES FOR PRECAST CONCRETE PRODUCTS
UNE-EN 480-15:2013 Admixtures for concrete, mortar and grout - Test methods - Part 15: Reference concrete and method for testing viscosity modifying admixtures
I.S. EN 13369:2013 COMMON RULES FOR PRECAST CONCRETE PRODUCTS
PREN 12390-6 : DRAFT 2009 TESTING HARDENED CONCRETE - PART 6: TENSILE SPLITTING STRENGTH OF TEST SPECIMENS
I.S. EN 12390-3:2009 TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS
DIN EN 1354:2005-09 Determination of compressive strength of lightweight aggregate concrete with open structure; German version EN 1354:2005
DIN EN 14488-5:2006-08 Testing sprayed concrete - Part 5: Determination of energy absorption capacity of fibre reinforced slab specimens
DIN EN 1168:2011-12 Precast concrete products - Hollow core slabs (includes Amendment A3:2011)
DIN EN 480-1:2015-01 Admixtures for concrete, mortar and grout - Test methods - Part 1: Reference concrete and reference mortar for testing
DIN EN 12504-4 E : 2004 TESTING CONCRETE IN STRUCTURES - PART 4: DETERMINATION OF ULTRASONIC PULSE VELOCITY
DIN EN 14651 E : 2007 TEST METHOD FOR METALLIC FIBERED CONCRETE - MEASURING THE FLEXURAL TENSILE STRENGTH (LIMIT OF PROPORTIONALITY (LOP), RESIDUAL)
DIN EN 13791:2008-05 ASSESSMENT OF IN-SITU COMPRESSIVE STRENGTH IN STRUCTURES AND PRECAST CONCRETE COMPONENTS
BS EN 1354:2005 Determination of compressive strength of lightweight aggregate concrete with open structure
UNE-EN 480-1:2015 Admixtures for concrete, mortar and grout - Test methods - Part 1: Reference concrete and reference mortar for testing
DIN EN 14944-3:2009-01 Influence of cementitious products on water intended for human consumption - Test methods - Part 3: Migration of substances from factory-made cementitious products
UNI EN 1168 : 2012 PRECAST CONCRETE PRODUCTS - HOLLOW CORE SLABS
UNI EN 12839 : 2012 PRECAST CONCRETE PRODUCTS - ELEMENTS FOR FENCES
UNI EN 480-1 : 2014 ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - TEST METHODS - PART 1: REFERENCE CONCRETE AND REFERENCE MORTAR FOR TESTING
UNI EN 13791 : 2008 ASSESSMENT OF IN-SITU COMPRESSIVE STRENGTH IN STRUCTURES AND PRECAST CONCRETE COMPONENTS
UNI EN 10080 : 2005 STEEL FOR THE REINFORCEMENT OF CONCRETE - WELDABLE REINFORCING STEEL - GENERAL
UNI EN 1504-10 : 2005 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS - REQUIREMENTS - QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS
UNI EN 13877-1 : 2013 CONCRETE PAVEMENTS - PART 1: MATERIALS
UNI EN 1881 : 2007 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - TESTING OF ANCHORING PRODUCTS BY THE PULL-OUT METHOD
UNI EN 12390-8 : 2009 TESTING HARDENED CONCRETE - PART 8: DEPTH OF PENETRATION OF WATER UNDER PRESSURE
UNI EN 12390-6 : 2010 TESTING HARDENED CONCRETE - PART 6: TENSILE SPLITTING STRENGTH OF TEST SPECIMENS
UNI EN 12390-3 : 2009 TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS
UNI CEN/TR 16563 : 2013 PRINCIPLES OF THE EQUIVALENT DURABILITY PROCEDURE
UNI EN 13877-2 : 2013 CONCRETE PAVEMENTS - PART 2: FUNCTIONAL REQUIREMENTS FOR CONCRETE PAVEMENTS
DIN EN 12390-13:2014-06 Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression
EN 206:2013+A1:2016 Concrete - Specification, performance, production and conformity
PD CEN/TS 12390-9:2016 Testing hardened concrete Freeze-thaw resistance with de-icing salts. Scaling
S.R. CEN TS 12390-11:2010 TESTING HARDENED CONCRETE - PART 11: DETERMINATION OF THE CHLORIDE RESISTANCE OF CONCRETE, UNIDIRECTIONAL DIFFUSION
PREN 13369 : DRAFT 2017 COMMON RULES FOR PRECAST CONCRETE PRODUCTS
I.S. EN 10080:2005 STEEL FOR THE REINFORCEMENT OF CONCRETE - WELDABLE REINFORCING STEEL - GENERAL
PD CEN/TR 16142:2011 Concrete. A study of the characteristic leaching behaviour of hardened concrete for use in the natural environment
BS EN 12390-13:2013 Testing hardened concrete Determination of secant modulus of elasticity in compression
PREN 12390-16 : DRAFT 2018 TESTING HARDENED CONCRETE - PART 16: DETERMINATION OF THE SHRINKAGE OF CONCRETE
12/30257889 DC : 0 BS EN 206 - CONCRETE - SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY
PREN 12390-5 : DRAFT 2017 TESTING HARDENED CONCRETE - PART 5: FLEXURAL STRENGTH OF TEST SPECIMENS
UNI EN 12390-13 : 2013 TESTING HARDENED CONCRETE - PART 13: DETERMINATION OF SECANT MODULUS OF ELASTICITY IN COMPRESSION
PD CEN/TR 16563:2013 Principles of the equivalent durability procedure
DIN EN 206:2014-07 CONCRETE - SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY
UNE-EN 13369:2013 Common rules for precast concrete products
UNE-EN ISO 21809-5:2018 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 5: External concrete coatings (ISO 21809-5:2017)
UNI CEN/TR 15678 : 2008 CONCRETE - RELEASE OF REGULATED DANGEROUS SUBSTANCES INTO SOIL, GROUNDWATER AND SURFACE WATER - TEST METHOD FOR NEW OR UNAPPROVED CONSTITUENTS OF CONCRETE AND FOR PRODUCTION CONCRETES
04/30083253 DC : DRAFT MAY 2004 EN 14944-1 - INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 1: INFLUENCE OF FACTORY MADE CEMENTITIOUS PRODUCTS ON ORGANOLEPTIC PARAMETERS
08/30160023 DC : DRAFT AUG 2008 BS EN ISO 21809-5 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS
16/30334711 DC : DRAFT JAN 2016 BS EN 12390-15 - TESTING HARDENED CONCRETE - PART 15: ADIABATIC METHOD FOR THE DETERMINATION OF HEAT RELEASED BY CONCRETE DURING ITS HARDENING PROCESS
I.S. EN 12504-4:2004 TESTING CONCRETE - PART 4: DETERMINATION OF ULTRASONIC PULSE VELOCITY
S.R. CEN/TS 12390-9:2016 TESTING HARDENED CONCRETE - PART 9: FREEZE-THAW RESISTANCE WITH DE-ICING SALTS - SCALING
S.R. CWA 16221:2010 VEHICLE SECURITY BARRIERS - PERFORMANCE REQUIREMENTS, TEST METHODS AND GUIDANCE ON APPLICATION
PREN 12390-3 : DRAFT 2017 TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS
CEN/TS 12390-10:2007 Testing hardened concrete - Part 10: Determination of the relative carbonation resistance of concrete
17/30360096 DC : 0 BS EN 12390-3 - TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS
EN ISO 21809-5:2017 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 5: External concrete coatings (ISO 21809-5:2017)
EN 1504-10:2017 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works
I.S. CEN TS 12390-9:2006 TESTING HARDENED CONCRETE - PART 9: FREEZE-THAW RESISTANCE - SCALING
I.S. EN 12839:2012 PRECAST CONCRETE PRODUCTS - ELEMENTS FOR FENCES
DIN EN 12390-5:2009-07 TESTING HARDENED CONCRETE - PART 5: FLEXURAL STRENGTH OF TEST SPECIMENS
BS EN 12390-6:2000 Testing hardened concrete Tensile splitting strength of test specimens
UNE-EN 13877-1:2013 Concrete pavements - Part 1: Materials
BS EN 206-1:2000 Concrete Specification, performance, production and conformity
BS EN 480-1:2014 Admixtures for concrete, mortar and grout. Test methods Reference concrete and reference mortar for testing
BS EN 14488-5:2006 Testing sprayed concrete Determination of energy absorption capacity of fibre reinforced slab specimens
BS EN 12390-5:2009 Testing hardened concrete Flexural strength of test specimens
UNE-EN 12839:2012 Precast concrete products - Elements for fences
BS EN 15184:2006 Products and systems for the protection and repair of concrete structures. Test methods. Shear adhesion of coated steel to concrete (pull-out test)
BS EN 1008:2002 Mixing water for concrete. Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete
BS EN 1881:2006 Products and systems for the protection and repair of concrete structures. Test methods. Testing of anchoring products by the pull-out method
DIN EN 14944-1:2006-07 Influence of cementitious products on water intended for human consumption - Test methods - Part 1: Influence of factory made cementitious products on organoleptic parameters
BS EN 12390-3:2009 Testing hardened concrete Compressive strength of test specimens
BS EN 12504-4:2004 Testing concrete Determination of ultrasonic pulse velocity
BS EN 13877-2:2013 Concrete pavements Functional requirements for concrete pavements
CEN/TR 15678:2008 Concrete - Release of regulated dangerous substances into soil, groundwater and surface water - Test method for new or unapproved constituents of concrete and for production concretes
EN 15184:2006 Products and systems for the protection and repair of concrete structures - Test methods - Shear adhesion of coated steel to concrete (pull-out test)
UNI EN 12390-5 : 2009 TESTING HARDENED CONCRETE - PART 5: FLEXURAL STRENGTH OF TEST SPECIMENS
EN 14891:2017 Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, assessment and verification of constancy of performance, classification and marking
EN 1881:2006 Products and systems for the protection and repair of concrete structures - Test methods - Testing of anchoring products by the pull-out method
EN 13877-1:2013 Concrete pavements - Part 1: Materials
EN 14944-3:2007 Influence of cementitious products on water intended for human consumption - Test methods - Part 3: Migration of substances from factory-made cementititous products
EN 480-15:2013 Admixtures for concrete, mortar and grout - Test methods - Part 15: Reference concrete and method for testing viscosity modifying admixtures
EN 13877-2:2013 Concrete pavements - Part 2: Functional requirements for concrete pavements
EN 14651:2005+A1:2007 Test method for metallic fibre concrete - Measuring the flexural tensile strength (limit of proportionality (LOP), residual)
EN 14944-1:2006 Influence of cementitious products on water intended for human consumption - Test methods - Part 1: Influence of factory made cementitious products on organoleptic parameters
EN 206-1:2000/A2:2005 CONCRETE - PART 1: SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY
EN 14488-5:2006 Testing sprayed concrete - Part 5: Determination of energy absorption capacity of fibre reinforced slab specimens
EN 1825-1:2004/AC:2006 GREASE SEPARATORS - PART 1: PRINCIPLES OF DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL
EN 480-1:2014 Admixtures for concrete, mortar and grout - Test methods - Part 1: Reference concrete and reference mortar for testing
EN 13791:2007 Assessment of in-situ compressive strength in structures and precast concrete components
PREN 14944-3 : DRAFT 2015 INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 3: MIGRATION OF SUBSTANCES FROM FACTORY-MADE CEMENTITIOUS PRODUCTS
PREN 14944-1 : DRAFT 2015 INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 1: INFLUENCE OF MIGRATION FROM FACTORY MADE CEMENTITIOUS PRODUCTS ON THE ORGANOLEPTIC PARAMETERS
CEN/TR 16142:2011 Concrete - A study of the characteristic leaching behaviour of hardened concrete for use in the natural environment
BS ISO 13007-5:2015 Ceramic tiles. Grouts and adhesives Requirements, test methods, evaluation of conformity, classification and designation of liquid-applied waterproofing membranes for use beneath ceramic tiling bonded with adhesives
PREN 12716 : DRAFT 2017 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - JET GROUTING
11/30251426 DC : DRAFT OCT 2011 BS EN 480-15 - ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - TEST METHODS - PART 15: REFERENCE CONCRETE AND METHOD FOR TESTING VISCOSITY MODIFYING ADMIXTURES
17/30349922 DC : 0 BS EN 13791 - ASSESSMENT OF IN-SITU COMPRESSIVE STRENGTH IN STRUCTURES AND PRECAST CONCRETE COMPONENTS
07/30163668 DC : 0 BS EN 12839 - PRECAST CONCRETE PRODUCTS - ELEMENTS OF FENCES
PREN 13791 : DRAFT 2017 ASSESSMENT OF IN-SITU COMPRESSIVE STRENGTH IN STRUCTURES AND PRECAST CONCRETE COMPONENTS
I.S. EN 12390-5:2009 TESTING HARDENED CONCRETE - PART 5: FLEXURAL STRENGTH OF TEST SPECIMENS
DD CEN/TS 12390-9:2006 Testing hardened concrete Freeze-thaw resistance. Scaling
BS EN 14944-3:2007 Influence of cementitious products on water intended for human consumption. Test methods Migration of substances from factory-made cementitious products
09/30200044 DC : 0 BS EN 12390-6 - TESTING HARDENED CONCRETE - PART 6: TENSILE SPLITTING STRENGTH OF TEST SPECIMENS
DIN EN 12390-13:2014-06 TESTING HARDENED CONCRETE - PART 13: DETERMINATION OF SECANT MODULUS OF ELASTICITY IN COMPRESSION
I.S. EN 13369:2018 COMMON RULES FOR PRECAST CONCRETE PRODUCTS
I.S. EN 12390-13:2013 TESTING HARDENED CONCRETE - PART 13: DETERMINATION OF SECANT MODULUS OF ELASTICITY IN COMPRESSION
PREN 12390-10 : DRAFT 2017 TESTING HARDENED CONCRETE - PART 10: DETERMINATION OF THE CARBONATION RESISTANCE OF CONCRETE AT ATMOSPHERIC LEVELS OF CARBON DIOXIDE
18/30371537 DC : DRAFT APR 2018 BS EN 12390-16 - TESTING HARDENED CONCRETE - PART 16: DETERMINATION OF THE SHRINKAGE OF CONCRETE
17/30360075 DC : 0 BS EN 12390-8 - TESTING HARDENED CONCRETE - PART 8: DEPTH OF PENETRATION OF WATER UNDER PRESSURE
15/30317324 DC : 0 BS EN 14944-3 - INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 3: MIGRATION OF SUBSTANCES FROM FACTORY-MADE CEMENTITIOUS PRODUCTS
18/30371540 DC : DRAFT APR 2018 BS EN 12390-17 - TESTING HARDENED CONCRETE - PART 17: DETERMINATION OF CREEP OF CONCRETE IN COMPRESSION
XP CEN/TS 1992-4-1 : 2009 XP DESIGN FOR FASTENINGS FOR USE IN CONCRETE - PART 4-1: GENERAL
I.S. EN 14944-3:2007 INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 3: MIGRATION OF SUBSTANCES FROM FACTORY-MADE CEMENTITITOUS PRODUCTS
17/30354260 DC : 0 BS EN 12716 - EXECUTION OF SPECIAL GEOTECHNICAL WORKS - JET GROUTING
UNI CEN/TS 12390-11 : 2010 TESTING HARDENED CONCRETE - PART 11: DETERMINATION OF THE CHLORIDE RESISTANCE OF CONCRETE, UNIDIRECTIONAL DIFFUSION
S.R. CEN/TR 16142:2011 CONCRETE - A STUDY OF THE CHARACTERISTIC LEACHING BEHAVIOUR OF HARDENED CONCRETE FOR USE IN THE NATURAL ENVIRONMENT
ISO 21809-5:2017 Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 5: External concrete coatings
EN 13369:2018 Common rules for precast concrete products
DIN EN 12390-8:2009-07 TESTING HARDENED CONCRETE - PART 8: DEPTH OF PENETRATION OF WATER UNDER PRESSURE
I.S. EN 1504-10:2017 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS
ISO 13007-5:2015 Ceramic tiles Grouts and adhesives Part 5: Requirements, test methods, evaluation of conformity, classification and designation of liquid-applied waterproofing membranes for use beneath ceramic tiling bonded with adhesives
DIN EN 13877-2:2013-06 Concrete pavements - Part 2: Functional requirements for concrete pavements
DIN EN 13877-1:2013-06 Concrete pavements - Part 1: Materials
DIN EN 14944-1:2015-06 (Draft) INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 1: INFLUENCE OF FACTORY MADE CEMENTITIOUS PRODUCTS ON ORGANOLEPTIC PARAMETERS
BS EN 14891:2017 Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives. Requirements, test methods, assessment and verification of constancy of performance, classification and marking
BS EN 1168 : 2005 PRECAST CONCRETE PRODUCTS - HOLLOW CORE SLABS
BS EN 14944-1:2006 Influence of cementitious products on water intended for human consumption. Test methods Influence of factory made cementitious products on organoleptic parameters
BS EN 1825-1:2004 Grease separators Principles of design, performance and testing, marking and quality control
BS EN 14651 : 2005 TEST METHOD FOR METALLIC FIBRE CONCRETE - MEASURING THE FLEXURAL TENSILE STRENGTH (LIMIT OF PROPORTIONALITY (LOP), RESIDUAL)
EN 10080:2005 Steel for the reinforcement of concrete - Weldable reinforcing steel - General
EN 12618-3:2004 Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of the adhesion of injection products, with or without thermal cycling - Slant shear method
EN 1008:2002 Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete
CEN/TS 12390-11:2010 Testing hardened concrete - Part 11: Determination of the chloride resistance of concrete, unidirectional diffusion
EN 12390-6:2009 Testing hardened concrete - Part 6: Tensile splitting strength of test specimens
EN 12839:2012 Precast concrete products - Elements for fences
DIN EN 15184:2006-11 Products and systems for the protection and repair of concrete structures - Test methods - Shear adhesion of coated steel to concrete (pull-out test)
DIN EN 12618-3:2004-11 Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of the adhesion of injection products, with or without thermal cycling - Slant shear method
DIN EN 1825-1:2004-12 Grease separators - Part 1: Principles of design, performance and testing, marking and quality control; German version EN 1825-1:2004
DIN EN 10080:2005-08 STEEL FOR THE REINFORCEMENT OF CONCRETE - WELDABLE REINFORCING STEEL - GENERAL
ONORM EN 14944-1 : 2006 INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 1: INFLUENCE OF FACTORY MADE CEMENTITIOUS PRODUCTS ON ORGANOLEPTIC PARAMETERS
ONORM EN 14944-3 : 2008 INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 3: MIGRATION OF SUBSTANCES FROM FACTORY-MADE CEMENTITITOUS PRODUCTS
UNE-EN 1168:2006 Precast concrete products - Hollow core slabs

EN 12390-1:2012 TESTING HARDENED CONCRETE - PART 1: SHAPE, DIMENSIONS AND OTHER REQUIREMENTS FOR SPECIMENS AND MOULDS
EN 12350-1:2009 Testing fresh concrete - Part 1: Sampling

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.