• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 12464-1:2011

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Light and lighting - Lighting of work places - Part 1: Indoor work places
Superseded date

03-09-2021

Published date

01-06-2011

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Lighting design criteria
5 Schedule of lighting requirements
6 Verification procedures
Annex A (informative) - Typical values of grid point
        spacing
Annex B (informative) - A-deviation
Bibliography
Index of interior areas, tasks and activities

This European Standard specifies lighting requirements for humans in indoor work places, which meet the needs for visual comfort and performance of people having normal ophthalmic (visual) capacity. All usual visual tasks are considered, including Display Screen Equipment (DSE).This European Standard specifies requirements for lighting solutions for most indoor work places and their associated areas in terms of quantity and quality of illumination. In addition recommendations are given for good lighting practice.This European Standard does not specify lighting requirements with respect to the safety and health of people at work and has not been prepared in the field of application of Article 137 of the EC treaty, although the lighting requirements, as specified in this European Standard, usually fulfil safety needs. Lighting requirements with respect to the safety and health of workers at work can be contained in Directives based on Article 137 of the EC treaty, in national legislation of member states implementing these directives or in other national legislation of member states.This European Standard neither provides specific solutions, nor restricts the designers´ freedom from exploring new techniques nor restricts the use of innovative equipment. The illumination can be provided by daylight, artificial lighting or a combination of both.This European Standard is not applicable for the lighting of outdoor work places and underground mining or emergency lighting. For outdoor work places, see EN 12464-2 and for emergency lighting, see EN 1838 and EN 13032-3.

Committee
CEN/TC 169
DevelopmentNote
Supersedes PREN 12464-1. (08/2011)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Superseded
SupersededBy
Supersedes

BS ISO 35101:2017 Petroleum and natural gas industries. Arctic operations. Working environment
IEC TS 61496-4-2:2014 Safety of machinery - Electro-sensitive protective equipment - Part 4-2: Particular requirements for equipment using vision based protective devices (VBPD) - Additional requirements when using reference pattern techniques (VBPDPP)
BS EN 15643-3:2012 Sustainability of construction works. Assessment of buildings Framework for the assessment of social performance
17/30331258 DC : 0 BS EN 12193 - LIGHT AND LIGHTING - SPORTS LIGHTING
DIN EN 14753 E : 2008 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR CONTINUOUS CASTING OF STEEL
PD CEN/TR 15193-2:2017 Energy performance of buildings. Energy requirements for lighting Explanation and justification of EN 15193-1, Module M9
13/30284424 DC : 0 BS EN 4726 - AEROSPACE SERIES - ACCEPTANCE OF THE COSMETIC VARIATIONS IN APPEARANCE OF AIRCRAFT CABIN PARTS
PD ISO/TR 20278:2015 Unwanted reflections from the active and inactive areas of display surfaces visible during use
I.S. EN 13779:2007 VENTILATION FOR NON-RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS
BS EN 15288-1 : 2008 SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN
DIN EN 15643-1:2010-12 Sustainability of construction works - Sustainability assessment of buildings - Part 1: General framework
BS EN 15093:2008 Safety of machinery. Safety requirements for hot flat rolling mills
09/30180290 DC : 0 BS EN 1247:2004/A1 - FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR LADLES, POURING EQUIPMENT, CENTRIFUGAL CASTING MACHINES, CONTINUOUS AND SEMI CONTINUOUS CASTING MACHINES
09/30179779 DC : 0 BS EN 13457 AMD1 - FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SPLITTING, SKIVING, CUTTING, CEMENTING AND CEMENT DRYING MACHINES - SAFETY REQUIREMENTS
DIN EN 15643-4:2012-04 Sustainability of construction works - Assessment of buildings - Part 4: Framework for the assessment of economic performance
EN 15643-3:2012 Sustainability of construction works - Assessment of buildings - Part 3: Framework for the assessment of social performance
CEN ISO/TR 52000-2:2017 Energy performance of buildings - Overarching EPB assessment - Part 2: Explanation and justification of ISO 52000-1 (ISO/TR 52000-2:2017)
DIN CEN/TS 16920;DIN SPEC 16594:2016-08 ENVIRONMENTAL INFLUENCE TESTING METHODOLOGY FOR OPERATIONAL DEPLOYMENTS OF EUROPEAN ABC SYSTEMS
I.S. EN 15193-1:2017 ENERGY PERFORMANCE OF BUILDINGS - ENERGY REQUIREMENTS FOR LIGHTING - PART 1: SPECIFICATIONS, MODULE M9
I.S. EN 16844:2017+A2:2019 Aesthetic medicine services - Non-surgical medical treatments
I.S. EN 14753:2007 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR CONTINUOUS CASTING OF STEEL
ISO/TR 52000-2:2017 Energy performance of buildings Overarching EPB assessment Part 2: Explanation and justification of ISO 52000-1
ISO 35101:2017 Petroleum and natural gas industries — Arctic operations — Working environment
17/30360253 DC : 0 BS EN 15288-1 - SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN
I.S. EN 16282-2:2016 EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 2: KITCHEN VENTILATION HOODS - DESIGN AND SAFETY REQUIREMENTS
I.S. EN 4726:2015 AEROSPACE SERIES - ACCEPTANCE OF THE COSMETIC VARIATIONS IN APPEARANCE OF AIRCRAFT CABIN PARTS
BS EN 4726:2015 Aerospace series. Acceptance of the cosmetic variations in appearance of aircraft cabin parts
ISO 23045:2008 Building environment design Guidelines to assess energy efficiency of new buildings
I.S. EN 15061:2007 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT
DIN EN 12665:2016-09 (Draft) LIGHT AND LIGHTING - BASIC TERMS AND CRITERIA FOR SPECIFYING LIGHTING REQUIREMENTS
DIN EN ISO 9680 E : 2015 DENTISTRY - OPERATING LIGHTS (ISO 9680:2014)
DIN EN 13675:2010-10 Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment (includes Amendment A1:2010)
BS EN 12203 : 2003 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SHOE AND LEATHER PRESSES - SAFETY REQUIREMENTS
BS EN 13457 : 2004 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SPLITTING, SKIVING, CUTTING, CEMENTING AND CEMENT DRYING MACHINES - SAFETY REQUIREMENTS
ISO 6385:2016 Ergonomics principles in the design of work systems
BS EN 1837 : 1999 SAFETY OF MACHINERY - INTEGRAL LIGHTING OF MACHINES
BS EN 15193:2007 Energy performance of buildings. Energy requirements for lighting
BS EN 12622 : 2009 SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES
BS EN 12110:2014 Tunnelling machines. Air locks. Safety requirements
14/30244780 DC : 0 BS ISO 19859 - GAS TURBINE APPLICATIONS - REQUIREMENTS FOR POWER GENERATION
BS EN 12387 : 2005 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - MODULAR SHOE REPAIR EQUIPMENT - SAFETY REQUIREMENTS
EN 12203:2003+A1:2009 Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements
EN 13032-3:2007 Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 3: Presentation of data for emergency lighting of work places
EN ISO 9680:2014 Dentistry - Operating lights (ISO 9680:2014)
EN 12215:2004+A1:2009 Coating plants - Spray booths for application of organic liquid coating materials - Safety requirements
EN 12622:2009+A1:2013 Safety of machine tools - Hydraulic press brakes
CEN/TS 16920:2016 Environmental influence testing methodology for operational deployments of European ABC systems
CEN/TS 16163:2014 Conservation of Cultural Heritage - Guidelines and procedures for choosing appropriate lighting for indoor exhibitions
EN 13457:2004+A1:2010 Footwear, leather and imitation leather goods manufacturing machines - Splitting, skiving, cutting, cementing and cement drying machines - Safety requirements
I.S. EN 13032-3:2007 MEASUREMENT AND PRESENTATION OF PHOTOMETRIC DATA OF LAMPS AND LUMINAIRES - PART 3: PRESENTATION OF DATA FOR EMERGENCY LIGHTING OF WORK PLACES
VDI 6011 Blatt 2:2006-04 Optimization of daylighting and artificial lighting - Rooflights
CEN/TR 16798-4:2017 Energy performance of buildings - Ventilation for buildings - Part 4: Interpretation of the requirements in EN 16798- 3 - For non-residential buildings - Performance requirements for ventilation and room-conditioning systems(Modules M5-1, M5-4)
UNI EN 16309 : 2014-10 SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY
DIN EN 16309:2014-12 SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY
16/30339514 DC : 0 BS EN 17003 - ROAD VEHICLES - ROLLER BRAKE TESTERS FOR VEHICLES OF MORE THAN 3,5 TONS GVW - SAFETY REQUIREMENTS
11/30244198 DC : 0 BS EN 16282-3 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 3: KITCHEN VENTILATION CEILINGS - DESIGN AND SAFETY REQUIREMENTS
UNI EN 15643-4 : 2012 SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 4: FRAMEWORK FOR THE ASSESSMENT OF ECONOMIC PERFORMANCE
DIN EN 15251:2012-12 Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics
I.S. EN 15193:2007 ENERGY PERFORMANCE OF BUILDINGS - ENERGY REQUIREMENTS FOR LIGHTING
10/30219687 DC : 0 BS EN 15643-4 - SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 4: FRAMEWORK FOR THE ASSESSMENT OF ECONOMIC PERFORMANCE
PD CEN/TS 16163:2014 Conservation of Cultural Heritage. Guidelines and procedures for choosing appropriate lighting for indoor exhibitions
DIN EN 15643-3:2012-04 Sustainability of construction works - Assessment of buildings - Part 3: Framework for the assessment of social performance
BS EN ISO 9241-307:2008 Ergonomics of human-system interaction Analysis and compliance test methods for electronic visual displays
PD CEN/TR 16798-4:2017 Energy performance of buildings. Ventilation for buildings Interpretation of the requirements in EN 16798-3. For non-residential buildings. Performance requirements for ventilation and room-conditioning systems(Modules M5-1, M5-4)
DIN EN 15288-1:2010-12 SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN
DIN EN 15093:2009-06 Safety of machinery - Safety requirements for hot flat rolling mills
DIN EN 15949:2012-05 Safety of machinery - Safety requirements for bar mills, structural steel mills and wire rod mills
BS EN 16309 : 2014 SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY
UNI EN 15093 : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS
11/30244195 DC : 0 BS EN 16282-2 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 2: KITCHEN VENTILATION HOODS - DESIGN AND SAFETY REQUIREMENTS
15/30263791 DC : 0 BS ISO 17772-1 - ENERGY PERFORMANCE OF BUILDINGS - INDOOR ENVIRONMENTAL QUALITY - PART 1: INDOOR ENVIRONMENTAL INPUT PARAMETERS FOR THE DESIGN AND ASSESSMENT OF ENERGY PERFORMANCE OF BUILDINGS
PREN 12464-2 : DRAFT 2013 LIGHT AND LIGHTING - LIGHTING OF WORK PLACES - PART 2: OUTDOOR WORK PLACES
04/102838 DC : DRAFT JAN 2004 EN 692 - MACHINE TOOLS - MECHANICAL PRESSES - SAFETY
14/30292857 DC : 0 BS EN 15193-1 - ENERGY PERFORMANCE OF BUILDINGS - MODULE M9 - ENERGY REQUIREMENTS FOR LIGHTING - PART 1: SPECIFICATIONS
I.S. EN 16844:2017 AESTHETIC MEDICINE SERVICES - NON-SURGICAL MEDICAL PROCEDURES
I.S. EN ISO 9241-307:2008 ERGONOMICS OF HUMAN-SYSTEM INTERACTION - PART 307: ANALYSIS AND COMPLIANCE TEST METHODS FOR ELECTRONIC VISUAL DISPLAYS
10/30216730 DC : 0 BS EN 15643-3 - SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 3: FRAMEWORK FOR THE ASSESSMENT OF SOCIAL PERFORMANCE
UNI CEN/TS 16163 : 2014 CONSERVATION OF CULTURAL HERITAGE - GUIDELINES AND PROCEDURES FOR CHOOSING APPROPRIATE LIGHTING FOR INDOOR EXHIBITIONS
I.S. EN 15093:2008 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS
S.R. CEN/TR 15193-2:2017 ENERGY PERFORMANCE OF BUILDINGS - ENERGY REQUIREMENTS FOR LIGHTING PART 2: EXPLANATION AND JUSTIFICATION OF EN 15193-1, MODULE M9
EN 15643-2:2011 Sustainability of construction works - Assessment of buildings - Part 2: Framework for the assessment of environmental performance
ISO/TR 20278:2015 Unwanted reflections from the active and inactive areas of display surfaces visible during use
EN 15643-4:2012 Sustainability of construction works - Assessment of buildings - Part 4: Framework for the assessment of economic performance
EN 15643-1:2010 Sustainability of construction works - Sustainability assessment of buildings - Part 1: General framework
UNI EN 15643-2 : 2011 SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 2: FRAMEWORK FOR THE ASSESSMENT OF ENVIRONMENTAL PERFORMANCE
BS EN 15061 : 2007 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT
S.R. CEN/TS 16920:2016 ENVIRONMENTAL INFLUENCE TESTING METHODOLOGY FOR OPERATIONAL DEPLOYMENTS OF EUROPEAN ABC SYSTEMS
I.S. EN 12665:2011 LIGHT AND LIGHTING - BASIC TERMS AND CRITERIA FOR SPECIFYING LIGHTING REQUIREMENTS
I.S. EN 16309:2014 SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY
UNI EN 15949 : 2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS
UNE-EN 15288-1:2009 Swimming pools - Part 1: Safety requirements for design
I.S. EN 15251:2007 INDOOR ENVIRONMENTAL INPUT PARAMETERS FOR DESIGN AND ASSESSMENT OF ENERGY PERFORMANCE OF BUILDINGS ADDRESSING INDOOR AIR QUALITY, THERMAL ENVIRONMENT, LIGHTING AND ACOUSTICS
PREN 17037 : DRAFT 2016 DAYLIGHT OF BUILDINGS
EN 4726:2015 Aerospace series - Acceptance of the cosmetic variations in appearance of aircraft cabin parts
DIN EN 1837:2009-12 Safety of machinery - Integral lighting of machines (includes Amendment A1:2009)
DIN EN 12215:2010-06 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
DIN EN 12387:2010-03 Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements (includes Amendment A1:2009)
DIN EN 12203:2010-07 Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements; German version EN 12203:2003+A1:2009
DIN EN 14681:2010-10 Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces (includes Amendment A1:2010)
DIN EN 12464-2:2014-05 LIGHT AND LIGHTING - LIGHTING OF WORK PLACES - PART 2: OUTDOOR WORK PLACES
DIN EN 15193 E : 2008 ENERGY PERFORMANCE OF BUILDINGS - ENERGY REQUIREMENTS FOR LIGHTING
DIN EN 13042-5 E : 2009 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS -SAFETY REQUIREMENTS - PART 5: PRESSES
DIN EN 12110:2014-10 TUNNELLING MACHINES - AIR LOCKS - SAFETY REQUIREMENTS
BS EN ISO 11111-1:2016 Textile machinery. Safety requirements Common requirements
BS EN 13032-3:2007 Measurement and presentation of photometric data of lamps and luminaires Presentation of data for emergency lighting of work places
ISO 19859:2016 Gas turbine applications Requirements for power generation
DIN EN ISO 9680:2015-02 Dentistry - Operating lights (ISO 9680:2014)
I.S. EN 12215:2004 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
I.S. EN ISO 6385:2016 ERGONOMIC PRINCIPLES IN THE DESIGN OF WORK SYSTEMS
I.S. EN 12203:2003 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SHOE AND LEATHER PRESSES - SAFETY REQUIREMENTS
EN 1837:1999+A1:2009 Safety of machinery - Integral lighting of machines
I.S. EN 12622:2009 SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES
I.S. EN 13042-5:2003 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 5: PRESSES
I.S. EN 13861:2011 SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY
I.S. EN ISO 11111-1:2016 TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 1: COMMON REQUIREMENTS (ISO 11111-1:2016)
I.S. EN 14681:2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES
I.S. EN 1837:1999 SAFETY OF MACHINERY - INTEGRAL LIGHTING OF MACHINES
I.S. EN ISO 9680:2014 DENTISTRY - OPERATING LIGHTS (ISO 9680:2014)
I.S. EN 12464-2:2014 LIGHT AND LIGHTING - LIGHTING OF WORK PLACES - PART 2: OUTDOOR WORK PLACES
I.S. EN 617:2001
I.S. EN 13675:2004 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT
I.S. EN 1247:2004 FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR LADLES, POURING EQUIPMENT, CENTRIFUGAL CASTING MACHINES, CONTINUOUS AND SEMI CONTINUOUS CASTING MACHINES
I.S. EN 12110:2014 TUNNELLING MACHINES - AIR LOCKS - SAFETY REQUIREMENTS
DIN EN 13032-3:2007-12 Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 3: Presentation of data for emergency lighting of work places
I.S. EN 12387:2005 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - MODULAR SHOE REPAIR EQUIPMENT - SAFETY REQUIREMENTS
DIN EN 1845:2008-06 Footwear manufacturing machines - Footwear moulding machines - Safety requirements
I.S. EN 1845:2007 FOOTWEAR MANUFACTURING MACHINES - FOOTWEAR MOULDING MACHINES - SAFETY REQUIREMENTS
UNI EN 1837 : 2009 SAFETY OF MACHINERY - INTEGRAL LIGHTING OF MACHINES
DIN EN 12193:2008-04 LIGHT AND LIGHTING - SPORTS LIGHTING
I.S. EN 13457:2004 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SPLITTING, SKIVING, CUTTING, CEMENTING AND CEMENT DRYING MACHINES - SAFETY REQUIREMENTS
UNI EN 12387 : 2010 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - MODULAR SHOE REPAIR EQUIPMENT - SAFETY REQUIREMENTS
IES HB 10 : 2011 THE LIGHTING HANDBOOK
VDI 3414 Blatt 2:2014-02 (Draft) Quality evaluation of wooden surfaces - Testing and measuring methods
VDI 2166 Blatt 2:2015-10 Planning of electrical installations in buildings - Advice for electric mobility
VDI 2050 Blatt 5:2010-10 Requirements at technical equipment rooms - Electrical engineering
VDI 6011 Blatt 1:2016-07 Lighting technology - Optimisation of daylight use and artificial lighting - Fundamentals and basic requirements
VDI 2199:2012-01 Recommendations for structure planning in the field of operating with industrial trucks
VDI 2089 Blatt 3:2011-09 Building installations in swimming baths - Open-air pools
ONORM EN 15094 : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS
VDI 2089 Blatt 2:2009-08 Building services in swimming baths - Efficient use of energy and water
VDI 3414 Blatt 1:2014-02 (Draft) Quality evaluation of wooden surfaces - Surface characteristics
VDI 2089 Blatt 1:2010-01 Building Services in swimming baths - Indoor pools
DIN EN 15193-1:2017-10 Energy performance of buildings - Energy requirements for lighting - Part 1: Specifications, Module M9
BS EN 12193:2007 Light and lighting. Sports lighting
PD ISO/TR 22100-3:2016 Safety of machinery. Relationship with ISO 12100 Implementation of ergonomic principles in safety standards
BS EN 15643-4:2012 Sustainability of construction works. Assessment of buildings Framework for the assessment of economic performance
09/30192729 DC : DRAFT FEB 2009 BS EN 15643-2 - SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 2: FRAMEWORK FOR THE ASSESSMENT OF ENVIRONMENTAL PERFORMANCE
15/30317874 DC : 0 BS EN 16844 - AESTHETIC MEDICINE SERVICES - NON-SURGICAL MEDICAL PROCEDURES
09/30175678 DC : 0 BS EN 14681:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES
DIN EN 15251 E : 2012 INDOOR ENVIRONMENTAL INPUT PARAMETERS FOR DESIGN AND ASSESSMENT OF ENERGY PERFORMANCE OF BUILDINGS ADDRESSING INDOOR AIR QUALITY, THERMAL ENVIRONMENT, LIGHTING AND ACOUSTICS
DIN EN 14677:2008-11 SAFETY OF MACHINERY - SECONDARY STEEL MAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL
DIN EN 15061:2009-05 Safety of machinery - Safety requirements for strip processing line machinery and equipment (includes Amendment A1:2008)
17/30334840 DC BS ISO 20086. Light and lighting. Energy performance of lighting in buildings
10/30234293 DC : 0 BS EN 12110 - TUNNELLING MACHINES - AIR LOCKS - SAFETY REQUIREMENTS
16/30333945 DC : 0 BS EN 15643-5 - SUSTAINABILITY OF CONSTRUCTION WORKS - SUSTAINABILITY ASSESSMENT OF BUILDINGS AND CIVIL ENGINEERING WORKS - PART 5: FRAMEWORK FOR THE ASSESSMENT OF SUSTAINABILITY PERFORMANCE OF CIVIL ENGINEERING WORKS
13/30245306 DC : 0 BS EN ISO 9680 - DENTISTRY - OPERATING LIGHTS
BS EN 14753:2007 Safety of machinery. Safety requirements for machinery and equipment for continuous casting of steel
UNI EN 15094 : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS
10/30219681 DC : 0 BS EN 15643-3 - SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 3: FRAMEWORK FOR THE ASSESSMENT OF SOCIAL PERFORMANCE
I.S. EN 15949:2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS
DIN EN 15094:2009-04 Safety of machinery - Safety requirements for cold flat rolling mills
S.R. CEN/TS 16163:2014 CONSERVATION OF CULTURAL HERITAGE - GUIDELINES AND PROCEDURES FOR CHOOSING APPROPRIATE LIGHTING FOR INDOOR EXHIBITIONS
PD IEC/TS 61496-4-2:2014 Safety of machinery. Electro-sensitive protective equipment Particular requirements for equipment using vision based protective devices (VBPD). Additional requirements when using reference pattern techniques (VBPDPP)
BS EN 15094:2008 Safety of machinery. Safety requirements for cold flat rolling mills
BS ISO 17772-1:2017 Energy performance of buildings. Indoor environmental quality Indoor environmental input parameters for the design and assessment of energy performance of buildings
UNI EN 14753 : 2008 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR THE CONTINUOUS CASTING OF STEEL
11/30247574 DC : 0 BS EN 16309 - SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - METHODS
15/30297473 DC : 0 BS EN 16798-1 - ENERGY PERFORMANCE OF BUILDINGS - PART 1: INDOOR ENVIRONMENTAL INPUT PARAMETERS FOR DESIGN AND ASSESSMENT OF ENERGY PERFORMANCE OF BUILDINGS ADDRESSING INDOOR AIR QUALITY, THERMAL ENVIRONMENT, LIGHTING AND ACOUSTICS - MODULE M1-6
09/30192733 DC : DRAFT FEB 2009 BS EN 15643-1 - SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 1: GENERAL FRAMEWORK
PD CEN/TS 16920:2016 Environmental influence testing methodology for operational deployments of European ABC systems
UNE-EN 12464-2:2016 Light and lighting - Lighting of work places - Part 2: Outdoor work places
EN 15193-1:2017 Energy performance of buildings - Energy requirements for lighting - Part 1: Specifications, Module M9
DIN EN 14753:2008-03 Safety of machinery - Safety requirements for machinery and equipment for continuous casting of steel
I.S. EN 15288-1:2008 SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN
I.S. EN 13032-2:2017 LIGHT AND LIGHTING - MEASUREMENT AND PRESENTATION OF PHOTOMETRIC DATA OF LAMPS AND LUMINAIRES - PART 2: PRESENTATION OF DATA FOR INDOOR AND OUTDOOR WORK PLACES
ISO/TR 22100-3:2016 Safety of machinery Relationship with ISO 12100 Part 3: Implementation of ergonomic principles in safety standards
EN 12193:2007 Light and lighting - Sports lighting
CEN/TR 15193-2 : 2017 ENERGY PERFORMANCE OF BUILDINGS - ENERGY REQUIREMENTS FOR LIGHTING - PART 2: EXPLANATION AND JUSTIFICATION OF EN 15193-1, MODULE M9
UNI EN 15643-3 : 2012 SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 3: FRAMEWORK FOR THE ASSESSMENT OF SOCIAL PERFORMANCE
I.S. EN 16282-3:2016 EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 3: KITCHEN VENTILATION CEILINGS - DESIGN AND SAFETY REQUIREMENTS
EN 16844:2017 Aesthetic medicine services - Non-surgical medical treatments
UNI EN 12665 : 2011 LIGHT AND LIGHTING - BASIC TERMS AND CRITERIA FOR SPECIFYING LIGHTING REQUIREMENTS
DIN EN 1247:2010-12 Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continous casting machines (includes Amendment A1:2010)
DIN EN 12622:2014-02 Safety of machine tools - Hydraulic press brakes (includes Amendment A1:2013)
NF EN 1837 : 1999 + A1 2009 SAFETY OF MACHINERY - INTEGRAL LIGHTING OF MACHINES
DIN EN 13861:2012-01 Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery
DIN EN 692:2009-10 Machine tools - Mechanical presses - Safety (includes Amendment A1:2009)
BS EN 12215 : 2004 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
EN 15288-1:2008+A1:2010 Swimming pools - Part 1: Safety requirements for design
UNI EN 14677 : 2008 SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL
UNI EN 12203 : 2010 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SHOE AND LEATHER PRESSES - SAFETY REQUIREMENTS
UNI EN ISO 9241-307 : 2009 ERGONOMICS OF HUMAN-SYSTEM INTERACTION - PART 307: ANALYSIS AND COMPLIANCE TEST METHODS FOR ELECTRONIC VISUAL DISPLAYS
UNI EN 692 : 2009 MACHINE TOOLS - MECHANICAL PRESSES - SAFETY
EN 617:2001+A1:2010 Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers
UNI EN 15061 : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT
UNI EN 617 : 2011 CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY AND EMC REQUIREMENTS FOR THE EQUIPMENT FOR THE STORAGE OF BULK MATERIALS IN SILOS, BUNKERS, BINS AND HOPPERS
UNI EN 1845 : 2008 FOOTWEAR MANUFACTURING MACHINES - FOOTWEAR MOULDING MACHINES - SAFETY REQUIREMENTS
UNI EN 13457 : 2010 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SPLITTING, SKIVING, CUTTING, CEMENTING AND CEMENT DRYING MACHINES - SAFETY REQUIREMENTS
UNI EN 13861 : 2011 SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY
UNI EN 1247 : 2010 FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR LADLES, POURING EQUIPMENT, CENTRIFUGAL CASTING MACHINES, CONTINUOUS AND SEMI CONTINUOUS CASTING MACHINES
UNI EN 12464-2 : 2014 LIGHT AND LIGHTING - LIGHTING OF WORK PLACES - PART 2: OUTDOOR WORK PLACES
UNI EN 13042-5 : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 5: PRESSES
UNI EN 13779 : 2008 VENTILATION FOR NON-RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS
UNI EN 12110 : 2014 TUNNELLING MACHINES - AIR LOCKS - SAFETY REQUIREMENTS
BS EN 1247 : 2004 FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR LADLES, POURING EQUIPMENT, CENTRIFUGAL CASTING MACHINES, CONTINUOUS AND SEMI CONTINUOUS CASTING MACHINES
UNI EN 12215 : 2010 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
UNI EN 13675 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT
UNI EN 12622 : 2014 SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES
UNI EN 14681 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES
S.R. CEN ISO/TR 52000-2:2017 ENERGY PERFORMANCE OF BUILDINGS - OVERARCHING EPB ASSESSMENT - PART 2: EXPLANATION AND JUSTIFICATION OF ISO 52000-1 (ISO/TR 52000-2:2017)
BS EN 15643-2:2011 Sustainability of construction works. Assessment of buildings Framework for the assessment of environmental performance
14/30303747 DC : 0 BS EN 16282-3 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 3: KITCHEN VENTILATION CEILINGS; DESIGN AND SAFETY REQUIREMENTS
BS EN 15949:2012 Safety of machinery. Safety requirements for bar mills, structural steel mills and wire rod mills
13/30281363 DC : 0 BS EN 12464-2 - LIGHT AND LIGHTING - LIGHTING OF WORK PLACES - PART 2: OUTDOOR WORK PLACES
UNI EN 15288-1 : 2010 SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN
14/30302903 DC : 0 BS EN 16774 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STEEL CONVERTER AND ASSOCIATED EQUIPMENT
I.S. EN 692:2005 MACHINE TOOLS - MECHANICAL PRESSES - SAFETY
BS EN 14677:2008 Safety of machinery. Secondary steelmaking. Machinery and equipment for treatment of liquid steel
PREN 16282-3 : DRAFT 2014 EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 3: KITCHEN VENTILATION CEILINGS; DESIGN AND SAFETY REQUIREMENTS
BS EN 15251:2007 Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics
I.S. EN 16774:2016 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STEEL CONVERTER AND ASSOCIATED EQUIPMENT
BS EN 16282-3:2016 Equipment for commercial kitchens. Components for ventilation in commercial kitchens Kitchen ventilation ceilings; design and safety requirements
16/30345783 DC : 0 BS EN 13032-2 - LIGHT AND LIGHTING - MEASUREMENT AND PRESENTATION OF PHOTOMETRIC DATA OF LAMPS AND LUMINAIRES - PART 2: PRESENTATION OF DATA FOR INDOOR AND OUTDOOR WORK PLACES
ISO 17772-1:2017 Energy performance of buildings — Indoor environmental quality — Part 1: Indoor environmental input parameters for the design and assessment of energy performance of buildings
09/30201995 DC : 0 BS EN 15949 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS
06/30124376 DC : DRAFT SEP 2006 EN 15193 - ENERGY PERFORMANCE OF BUILDINGS - ENERGY REQUIREMENTS FOR LIGHTING
DIN EN 14677 E : 2008 SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL
14/30304361 DC : 0 BS EN ISO 11111-1 - TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 1: COMMON REQUIREMENTS
PD IEC/TS 61496-4-3:2015 Safety of machinery. Electro-sensitive protective equipment Particular requirements for equipment using vision based protective devices (VBPD). Additional requirements when using stereo vision techniques (VBPDST)
PD CEN ISO/TR 52000-2:2017 Energy performance of buildings. Overarching EPB assessment Explanation and justification of ISO 52000-1
DIN EN ISO 9241-307:2009-06 ERGONOMICS OF HUMAN-SYSTEM INTERACTION - PART 307: ANALYSIS AND COMPLIANCE TEST METHODS FOR ELECTRONIC VISUAL DISPLAYS
DIN EN 15643-2:2011-05 Sustainability of construction works - Assessment of buildings - Part 2: Framework for the assessment of environmental performance
DIN EN 15061 E : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT
DIN EN 15093 E : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS
BS EN 16774:2016 Safety of machinery. Safety requirements for steel converter and associated equipment
PREN 13032-2 : DRAFT 2016 LIGHT AND LIGHTING - MEASUREMENT AND PRESENTATION OF PHOTOMETRIC DATA OF LAMPS AND LUMINAIRES - PART 2: PRESENTATION OF DATA FOR INDOOR AND OUTDOOR WORK PLACES
I.S. EN 15094:2008 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS
16/30342285 DC : 0 BS EN 17037 - DAYLIGHT OF BUILDINGS
PREN 17003 : DRAFT 2016 ROAD VEHICLES - ROLLER BRAKE TESTERS FOR VEHICLES OF MORE THAN 3,5 TONS GVW - SAFETY REQUIREMENTS
17/30364338 DC : 0 BS EN 1009-1 - MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 1: COMMON REQUIREMENTS FOR PARTLY COMPLETED MACHINERY AND PROCESSING PLANTS
PREN 12193 : DRAFT 2017 LIGHT AND LIGHTING - SPORTS LIGHTING
EN 13032-2:2017 Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 2: Presentation of data for indoor and outdoor work places
I.S. EN 12193:2007 LIGHT AND LIGHTING - SPORTS LIGHTING
DIN EN 617:2011-06 Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers (includes Amendment A1:2010)
BS EN 13675 : 2004 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT
BS EN ISO 9680:2014 Dentistry. Operating lights
ISO 9241-307:2008 Ergonomics of human-system interaction — Part 307: Analysis and compliance test methods for electronic visual displays
UNE-EN 12622:2011 Safety of machine tools - Hydraulic press brakes
UNE-EN 12665:2012 Light and lighting - Basic terms and criteria for specifying lighting requirements
BS ISO 19859:2016 Gas turbine applications. Requirements for power generation
BS EN 12665:2011 Light and lighting. Basic terms and criteria for specifying lighting requirements
ISO 11111-1:2016 Textile machinery Safety requirements Part 1: Common requirements
05/30128995 DC : 0 PREN 15251 - CRITERIA FOR THE INDOOR ENVIRONMENT INCULDING THERMAL, INDOOR AIR QUALITY, LIGHT AND NOISE
UNE-EN 617:2002 Continuous handling equipment and systems- Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers.
UNE EN 16309 : 0 SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY
BS EN 12464-2:2014 Light and lighting. Lighting of work places Outdoor work places
BS EN 13042-5 : 2003 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 5: PRESSES
UNE-EN 1247:2005 Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continous casting machines
BS EN 13779:2007 Ventilation for non-residential buildings. Performance requirements for ventilation and room-conditioning systems
UNE-EN ISO 11111-1:2016 Textile machinery - Safety requirements - Part 1: Common requirements (ISO 11111-1:2016)
ISO 9680:2014 Dentistry Operating lights
16/30282349 DC : 0 BS ISO 35101 - PETROLEUM AND NATURAL GAS INDUSTRIES - ARCTIC OPERATIONS - WORKING ENVIRONMENT
DIN EN 13042-5:2009-12 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 5: Presses (includes Amendment A1:2009)
EN 15193:2007/AC:2010 ENERGY PERFORMANCE OF BUILDINGS - ENERGY REQUIREMENTS FOR LIGHTING
EN 16774:2016 Safety of machinery - Safety requirements for steel converter and associated equipment
EN 692:2005+A1:2009 Machine tools - Mechanical presses - Safety
EN 13675:2004+A1:2010 Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment
EN ISO 11111-1:2016 Textile machinery - Safety requirements - Part 1: Common requirements (ISO 11111-1:2016)
EN 13861:2011 Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery
EN 15094:2008 Safety of Machinery - Safety requirements for cold flat rolling mills
EN ISO 9241-307:2008 Ergonomics of human-system interaction - Part 307: Analysis and compliance test methods for electronic visual displays (ISO 9241-307:2008)
EN 13779:2007 Ventilation for non-residential buildings - Performance requirements for ventilation and room-conditioning systems
EN 15061:2007+A1:2008 Safety of machinery - Safety requirements for strip processing line machinery and equipment
UNI EN ISO 9680 : 2015 DENTISTRY - OPERATING LIGHTS
EN 15949:2012 Safety of machinery - Safety requirements for bar mills, structural steel mills and wire rod mills
EN 16309:2014+A1:2014 Sustainability of construction works - Assessment of social performance of buildings - Calculation methodology
EN 15093:2008 Safety of Machinery - Safety requirements for hot flat rolling mills
EN 14681:2006+A1:2010 Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces
EN 1845:2007 Footwear manufacturing machines - Footwear moulding machines - Safety requirements
EN 14753:2007 Safety of machinery - Safety requirements for machinery and equipment for continuous casting of steel
EN 13042-5:2003+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 5: Presses
EN 14677:2008 Safety of machinery - Secondary steelmaking - Machinery and equipment for treatment of liquid steel
EN 15251:2007 Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics
EN ISO 6385:2016 ERGONOMIC PRINCIPLES IN THE DESIGN OF WORK SYSTEMS (ISO 6385:2016)
I.S. EN 15643-4:2012 SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 4: FRAMEWORK FOR THE ASSESSMENT OF ECONOMIC PERFORMANCE
05/30128661 DC : 0 EN 13779 - VENTILATION FOR NON RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS
BS EN 15643-1:2010 Sustainability of construction works. Sustainability assessment of buildings General framework
17/30355716 DC : 0 BS EN 63008 ED.1.0 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - ACCESSIBILITY OF CONTROL ELEMENTS, DOORS, LIDS, DRAWERS AND HANDLES
PD IEC/TS 62835:2015 Electric toasters for household and similar use. Methods and measurements for improving accessibility
DIN CEN/TS 16920;DIN SPEC 16594:2016-08 ENVIRONMENTAL INFLUENCE TESTING METHODOLOGY FOR OPERATIONAL DEPLOYMENTS OF EUROPEAN ABC SYSTEMS
I.S. EN 15643-3:2012 SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 3: FRAMEWORK FOR THE ASSESSMENT OF SOCIAL PERFORMANCE
09/30180832 DC : DRAFT AUG 2009 BS EN 13675 AMD1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND FINISHING LINE EQUIPMENT
14/30297790 DC : 0 BS EN ISO 6385 - ERGONOMIC PRINCIPLES IN THE DESIGN OF WORK SYSTEMS
PD CEN/TS 17108:2017 Non-destructive testing. Lighting in penetrant and magnetic particle testing, good practice
14/30303744 DC : 0 BS EN 16282-2 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 2: KITCHEN VENTILATION HOODS; DESIGN AND SAFETY REQUIREMENTS
13/30287708 DC : 0 PD IEC/TS 62853 ED.1.0 - ELECTRIC TOASTERS FOR HOUSEHOLD AND SIMILAR USE - METHODS AND MEASUREMENTS FOR IMPROVING ACCESSIBILITY
BS EN 15193-1:2017 Energy performance of buildings. Energy requirements for lighting Specifications, Module M9
12/30237838 DC : 0 BS ISO 16343 - ENERGY PERFORMANCE OF BUILDINGS - METHODS FOR EXPRESSING ENERGY PERFORMANCE AND FOR ENERGY CERTIFICATION OF BUILDINGS
BS EN 16282-2:2016 Equipment for commercial kitchens. Components for ventilation in commercial kitchens Kitchen ventilation hoods; design and safety requirements
I.S. EN 15643-1:2010 SUSTAINABILITY OF CONSTRUCTION WORKS - SUSTAINABILITY ASSESSMENT OF BUILDINGS - PART 1: GENERAL FRAMEWORK
09/30181772 DC : 0 BS EN 1837:1999/A1 - SAFETY OF MACHINERY - INTEGRAL LIGHTING OF MACHINES
PREN 16282-2 : DRAFT 2014 EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 2: KITCHEN VENTILATION HOODS; DESIGN AND SAFETY REQUIREMENTS
UNI EN 15643-1 : 2010 SUSTAINABILITY OF CONSTRUCTION WORKS - SUSTAINABILITY ASSESSMENT OF BUILDINGS - PART 1: GENERAL FRAMEWORK
DIN EN 15094 E : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS
PREN 4726 : DRAFT 2017 AEROSPACE SERIES - ACCEPTANCE PARAMETERS OF AESTHETICAL VARIATIONS FOR ALL VISIBLE EQUIPMENT INSTALLED IN AIRCRAFT CABINS UNDER ALL CONTRACTUAL VARIATIONS
PREN 15643-5 : DRAFT 2016 SUSTAINABILITY OF CONSTRUCTION WORKS - SUSTAINABILITY ASSESSMENT OF BUILDINGS AND CIVIL ENGINEERING WORKS - PART 5: FRAMEWORK FOR THE ASSESSMENT OF SUSTAINABILITY PERFORMANCE OF CIVIL ENGINEERING WORKS
S.R. CEN/TR 16798-4:2017 ENERGY PERFORMANCE OF BUILDINGS - VENTILATION FOR BUILDINGS - PART 4: INTERPRETATION OF THE REQUIREMENTS IN EN 16798-3 - FOR NON-RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS (MODULES M5-1, M5-4)
I.S. EN 15643-2:2011 SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF BUILDINGS - PART 2: FRAMEWORK FOR THE ASSESSMENT OF ENVIRONMENTAL PERFORMANCE
I.S. EN 14677:2008 SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL
S.R. CEN/TR 17108:2017 NON-DESTRUCTIVE TESTING - LIGHTING IN PENETRANT AND MAGNETIC PARTICLE TESTING, GOOD PRACTICE
BS EN 16844 : 2017 AESTHETIC MEDICINE SERVICES - NON-SURGICAL MEDICAL TREATMENTS
IEC TS 61496-4-3:2015 Safety of machinery - Electro-sensitive protective equipment - Part 4-3: Particular requirements for equipment using vision based protective devices (VBPD) - Additional requirements when using stereo vision techniques (VBPDST)
DIN EN 13457:2010-10 Footwear, leather and imitation leather goods manufacturing machines - Splitting, skiving, cutting, cementing and cement drying machines - Safety requirements; German version EN 13457:2004+A1:2010
DIN EN 14681 E : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES
BS EN 1845:2007 Footwear manufacturing machines. Footwear moulding machines. Safety requirements
BS EN 692 : 2005 MACHINE TOOLS - MECHANICAL PRESSES - SAFETY
BS EN 13861:2011 Safety of machinery. Guidance for the application of ergonomics standards in the design of machinery
BS EN 617 : 2001
BS EN ISO 6385:2016 Ergonomics principles in the design of work systems
BS EN 14681 : 2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES
EN 12387:2005+A1:2009 Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements
EN 1247:2004+A1:2010 Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continuous casting machines
CEN/TR 17108:2017 Non-destructive testing - Lighting in penetrant and magnetic particle testing, good practice
DIN EN 13779:2007-09 VENTILATION FOR NON-RESIDENTIAL BUILDINGS - PERFORMANCE REQUIREMENTS FOR VENTILATION AND ROOM-CONDITIONING SYSTEMS
EN 12464-2:2014 Light and lighting - Lighting of work places - Part 2: Outdoor work places
DIN EN 12110:2003-05 TUNNELLING MACHINES - AIR LOCKS - SAFETY REQUIREMENTS
EN 12110:2014 Tunnelling machines - Air locks - Safety requirements
DIN EN 15193:2008-01 ENERGY PERFORMANCE OF BUILDINGS - ENERGY REQUIREMENTS FOR LIGHTING
UNE-EN 12203:2004 Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements

ISO 9680:2014 Dentistry Operating lights
EN 15193:2007/AC:2010 ENERGY PERFORMANCE OF BUILDINGS - ENERGY REQUIREMENTS FOR LIGHTING
ISO 9241-307:2008 Ergonomics of human-system interaction — Part 307: Analysis and compliance test methods for electronic visual displays
ISO 14253-1:2017 Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 1: Decision rules for verifying conformity or nonconformity with specifications
EN ISO 9241-302:2008 Ergonomics of human-system interaction - Part 302: Terminology for electronic visual displays (ISO 9241-302:2008)
AS 4285:2019 Rooflights
EN 12193:2007 Light and lighting - Sports lighting
EN ISO 6385:2016 ERGONOMIC PRINCIPLES IN THE DESIGN OF WORK SYSTEMS (ISO 6385:2016)
EN 12464-2:2014 Light and lighting - Lighting of work places - Part 2: Outdoor work places
EN ISO 9241-307:2008 Ergonomics of human-system interaction - Part 307: Analysis and compliance test methods for electronic visual displays (ISO 9241-307:2008)
EN 13032-1:2004+A1:2012 Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 1: Measurement and file format
ISO 3864-1:2011 Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings
ISO 15469:2004 Spatial distribution of daylight — CIE standard general sky
ISO 6385:2016 Ergonomics principles in the design of work systems
ISO 8995-1:2002 Lighting of work places Part 1: Indoor
EN 1838:2013 Lighting applications - Emergency lighting
EN ISO 9680:2014 Dentistry - Operating lights (ISO 9680:2014)
ISO 9241-302:2008 Ergonomics of human-system interaction — Part 302: Terminology for electronic visual displays
EN 13032-3:2007 Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 3: Presentation of data for emergency lighting of work places

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.