• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 12889:2000

Withdrawn

Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Trenchless construction and testing of drains and sewers

Withdrawn date

31-07-2000

Published date

19-01-2000

Foreword
1 Scope
2 Normative references
3 Definitions
4 General
5 Construction components and materials
    5.1 General
    5.2 Pipes and joints
    5.3 Manholes and inspection chambers
    5.4 Delivery, handling and transportation
          on site
    5.5 Storage
6 Techniques
    6.1 Unmanned techniques
    6.2 Manned techniques
7 Requirements
    7.1 Safeguarding design assumptions
    7.2 Special requirements
    7.3 Safeguarding design assumptions
    7.4 Information about ground conditions
    7.5 Data collection during installation
    7.6 Stability during construction
    7.7 Overcut
    7.8 Overbreak
    7.9 Settlement and heave
    7.10 Deviation in line and level
8 Inspection and/or testing of pipelines after
    installation
    8.1 Visual inspection
    8.2 Leaktightness
9 Procedures and requirements for testing gravity
    pipelines
    9.1 General
    9.2 Testing with air (Method "L")
    9.3 Testing with water (Method "W")
    9.4 Testing of each individual joint
10 Testing of pressure pipelines
11 Qualification
Annex A (informative) Abstract from Council Directive
        of 17 September 1990 on the procurement
        procedures of entities operating in the water,
        energy, transport and telecommunication sectors

This European Standard is applicable to the trenchless construction and testing of new drains and new sewers in the ground, which are normally operating as gravity pipelines, formed using prefabricated pipes and their joints. The trenchless construction and testing of drains and sewers operating under pressure is also covered by this European Standard together with prEN 805 as appropriate. This European Standard also applies to trenchless replacement techniques. Renovation techniques for existing sewers and drains are not covered by this European Standard.

Committee
CEN/TC 165
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Withdrawn

Standards Relationship
SN EN 12889 : 2000 Identical
I.S. EN 12889:2000 Identical
UNI EN 12889 : 2002 Identical
NBN EN 12889 : 2000 Identical
NEN EN 12889 : 2000 Identical
BS EN 12889:2000 Identical
NF EN 12889 : 2000 Identical
DIN EN 12889:2000-03 Identical
UNE-EN 12889:2000 Identical
NS EN 12889 : 1ED 2000 Identical
PN EN 12889 : 2003 Identical
DS EN 12889 : 2000 Identical
ONORM EN 12889 : 2000 Identical

02/103343 DC : DRAFT MAY 2002 PREN 14457 - GENERAL REQUIREMENTS FOR COMPONENTS SPECIFICALLY DESIGNED FOR USE IN TRENCHLESS CONSTRUCTION OF DRAINS AND SEWERS
17/30341312 DC : 0 BS EN ISO 21225-1 - PLASTICS PIPING SYSTEMS FOR THE TRENCHLESS REPLACEMENT OF UNDERGROUND PIPELINE NETWORKS - PART 1: REPLACEMENT ON THE LINE BY PIPE BURSTING AND PIPE EXTRACTION
PREN 15885 : DRAFT 2015 CLASSIFICATION AND CHARACTERISTICS OF TECHNIQUES FOR RENOVATION, REPAIR AND REPLACEMENT OF DRAINS AND SEWERS
EN ISO 11295:2017 Classification and information on design and applications of plastics piping systems used for renovation and replacement (ISO 11295:2017)
BS EN 295-7:2013 Vitrified clay pipe systems for drains and sewers Requirements for pipes and joints for pipe jacking
BS EN 295-1:2013 Vitrified clay pipe systems for drains and sewers Requirements for pipes, fittings and joints
13/30295203 DC : 0 BS EN 1610 - CONSTRUCTION AND TESTING OF DRAINS AND SEWERS
17/30341315 DC : 0 BS EN ISO 21225-2 - PLASTICS PIPING SYSTEMS FOR THE TRENCHLESS REPLACEMENT OF UNDERGROUND PIPELINE NETWORKS - PART 2: REPLACEMENT OFF THE LINE BY HORIZONTAL DIRECTIONAL DRILLING AND IMPACT MOLING
PREN 295-1 : DRAFT 2010 VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 1: REQUIREMENTS FOR PIPES, FITTINGS AND JOINTS
PREN 752 : DRAFT 2015 DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - SEWER SYSTEM MANAGEMENT
BS EN 13380:2001 General requirements for components used for renovation and repair of drain and sewer systems outside buildings
DIN EN 752:2015-10 (Draft) DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - SEWER SYSTEM MANAGEMENT
I.S. EN 295-7:2013 VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 7: REQUIREMENTS FOR PIPES AND JOINTS FOR PIPE JACKING
I.S. EN 1610:2015 CONSTRUCTION AND TESTING OF DRAINS AND SEWERS
I.S. EN 295-1:2013 VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 1: REQUIREMENTS FOR PIPES, FITTINGS AND JOINTS
I.S. EN ISO 11295:2017 CLASSIFICATION AND INFORMATION ON DESIGN AND APPLICATIONS OF PLASTICS PIPING SYSTEMS USED FOR RENOVATION AND REPLACEMENT (ISO 11295:2017)
I.S. EN 16932-1:2018 DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - PUMPING SYSTEMS - PART 1: GENERAL REQUIREMENTS
EN 16932-1:2018 Drain and sewer systems outside buildings - Pumping systems - Part 1: General requirements
DIN EN 295-7:2013-05 VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 7: REQUIREMENTS FOR PIPES AND JOINTS FOR PIPE JACKING
UNE-EN 1610:2016 Construction and testing of drains and sewers
I.S. EN 752:2017 DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - SEWER SYSTEM MANAGEMENT
ISO 21225-1:2018 Plastics piping systems for the trenchless replacement of underground pipeline networks — Part 1: Replacement on the line by pipe bursting and pipe extraction
15/30325882 DC : 0 BS EN 16932-1 - DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - PUMPING SYSTEMS - PART 1: GENERAL REQUIREMENTS
PREN 1610 : DRAFT 2013 CONSTRUCTION AND TESTING OF DRAINS AND SEWERS
DIN EN 295-1:2013-05 VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 1: REQUIREMENTS FOR PIPES, FITTINGS AND JOINTS
BS EN 1610:2015 Construction and testing of drains and sewers
UNE-EN 295-7:2013 Vitrified clay pipe systems for drains and sewers - Part 7: Requirements for pipes and joints for pipe jacking
EN 295-7:2013 Vitrified clay pipe systems for drains and sewers - Part 7: Requirements for pipes and joints for pipe jacking
EN 1610:2015 Construction and testing of drains and sewers
EN 752:2017 Drain and sewer systems outside buildings - Sewer system management
EN 14457:2004 General requirements for components specifically designed for use in trenchless construction of drains and sewers
EN 295-1:2013 Vitrified clay pipe systems for drains and sewers - Part 1: Requirements for pipes, fittings and joints
16/30332542 DC : 0 BS EN 15885 - CLASSIFICATION AND CHARACTERISTICS OF TECHNIQUES FOR RENOVATION, REPAIR AND REPLACEMENT OF DRAINS AND SEWERS
10/30216984 DC : 0 BS EN 295-1 - VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 1: REQUIREMENTS FOR PIPES, FITTINGS AND JOINTS
BS EN ISO 11295:2017 Classification and information on design and applications of plastics piping systems used for renovation and replacement
ISO 11295:2017 Classification and information on design and applications of plastics piping systems used for renovation and replacement
UNE-EN 295-1:2013 Vitrified clay pipe systems for drains and sewers - Part 1: Requirements for pipes, fittings and joints
BS EN 14457:2004 General requirements for components specifically designed for use in trenchless construction of drains and sewers
EN 13380:2001 General requirements for components used for renovation and repair of drain and sewer systems outside buildings
DIN EN 14457:2004-09 General requirements for components specifically designed for use in trenchless construction of drains and sewers

Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.