• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 2826:2011

Current
Current

The latest, up-to-date edition.

Aerospace series - Burning behaviour of non metallic materials under the influence of radiating heat and flames - Determination of gas components in the smoke
Published date

23-02-2011

Foreword
1 Scope
2 Normative references
3 Short description of the test method
4 Terms and definitions
5 Designation
6 Test equipment
7 Specimens
8 Procedure
9 Gas sampling and analysis
10 Test report
Annex A (normative) - Example for a test report on the
        determination of gas components in the smoke

This European Standard defines a test method to determine the concentration of certain gas components due to pyrolitic decomposition of solid materials and composite materials under the influence of radiant heat only or with simultaneous flame application.NOTE 1The gas components in the smoke are determined according to the specific environmental and test conditions defined in EN 2824 and this standard. No studies have been made up to now to determine whether the results can be transferred to different conditions, particularly to actual fire conditions. The inhalatory toxical risk and irritancy affect cannot be assessed by merely measuring the concentration of individual gas components in the smoke.NOTE 2The burning behaviour and consequently the gas components in the smoke of aerospace materials are not only influenced by the type of material but also to a large extent by the configuration, the specific surface and mass, the combination with other materials, the means of joining as well as the processing technique.NOTE 3These influences shall be taken into account in the preparation of tests, the selection of test specimens and the interpretation of test results.

Committee
ASD-STAN
DevelopmentNote
Supersedes PREN 2826. (08/2011)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current
Supersedes

Standards Relationship
PN EN 2826 : 2011 Identical
DIN EN 2826:2011-05 Identical
NBN EN 2826 : 2011 Identical
UNE-EN 2826:2011 Identical
UNI EN 2826 : 2012 Identical
NF EN 2826 : 2012 Identical
SN EN 2826 : 2011 Identical
NEN EN 2826 : 2011 Identical
NS EN 2826 : 2011 Identical
I.S. EN 2826:2011 Identical
BS EN 2826:2011 Identical

13/30290552 DC : 0 BS EN 4691-1 AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - PART 1: TECHNICAL SPECIFICATION
PREN 6049-009 : 200P3 AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVE IN META-ARAMID FIBRES - PART 009: SELF-WRAPPING FIRE PROTECTION SLEEVE, FLEXIBLE POST INSTALLATION OPERATING TEMPERATURE FROM -55 DEGREES C TO 260 DEGREES C - PRODUCT STANDARD
00/717037 DC : 0 EN 4056-005 - AEROSPACE SERIES - CABLE TIES FOR HARNESSES - PART 005: PLASTIC CABLE TIES WITH METALLIC LOCKING DEVICES - TYPE 1 OPERATING TEMPERATURES -65 DEGREE C TO +105 DEGREE C AND TYPE 2, OPERATING TEMPERATURES -65 DEGREE C TO +105 DEGREE C - PRODUCT STANDARD
97/713388 DC : DRAFT AUG 1997 PREN 2719 - AEROSPACE SERIES - POLYCARBONATE SHEET - TECHNICAL SPECIFICATION
EN 4674-004:2017 Aerospace series - Electrical cables, installation - Self-wrapping shielding (EMI) protective sleeve - Part 004: Open sleeve - Outside pressurized area - EMI protection 10 kA - Temperature range - 65 °C to 200 °C - Product standard
PREN 6049-001 : 200P3 AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVE IN META-ARAMID FIBRES - PART 001: TECHNICAL SPECIFICATION
PREN 6049-003 : 200P1 AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVE IN META-ARAMID FIBRES - PART 003: BRAIDED, TUBULAR, EXPANDABLE - PRODUCT STANDARD
PREN 3774-001 : 200P2 AEROSPACE SERIES - CIRCUIT BREAKERS, THREE-POLE, TEMPERATURE COMPENSATED, RATED CURRENTS 1 A TO 25 A - PART 001: TECHNICAL SPECIFICATION
I.S. EN 4056-003:2016 AEROSPACE SERIES - CABLE TIES FOR HARNESSES - PART 003: PLASTIC CABLE TIES - OPERATING TEMPERATURES -65 DEGREES C TO 105 DEGREES C AND -65 DEGREES C TO 150 DEGREES C - PRODUCT STANDARD
EN 4056-003:2016 Aerospace series - Cable ties for harnesses - Part 003: Plastic cable ties - Operating temperatures -65 °C to 105 °C and -65 °C to 150 °C - Product standard
BS EN 6049-008:2017 Aerospace series. Electrical cables, installation. Protection sleeve in meta-aramid fibres Self-wrapping shielded (EMI) protective sleeve with nickel copper braid, flexible post installation operating temperature from -55 °C to 200 °C. Product standard
BS EN 4674-003:2017 Aerospace series. Electrical cables, installation. Self-wrapping shielding (EMI) protective sleeve Open sleeve. Inside pressurized area. EMI protection 5 kA. Temperature range - 65 °C to 200 °C. Product standard
17/30366494 DC : 0 BS EN 4056-003 - AEROSPACE SERIES - CABLE TIES FOR HARNESSES - PART 003: PLASTIC CABLE TIES - OPERATING TEMPERATURES - 65 DEGREES C TO 105 DEGREES C AND - 65 DEGREES C TO 150 DEGREES C - PRODUCT STANDARD
UNI EN 2824 : 2012 AEROSPACE SERIES - BURNING BEHAVIOUR OF NON-METALLIC MATERIALS UNDER THE INFLUENCE OF RADIATING HEAT AND FLAMES - DETERMINATION OF SMOKE DENSITY AND GAS COMPONENTS IN THE SMOKE OF MATERIALS - TEST EQUIPMENT APPARATUS AND MEDIA
00/717166 DC : DRAFT NOV 2000 PREN 4056-001 - AEROSPACE SERIES - CABLE TIES FOR HARNESSES - PART 001: TECHNICAL SPECIFICATION
BS EN 4056-006:2014 Aerospace series. Cable ties for harnesses Peek cable ties. For operating temperatures. -55 °C to 240 °C. Product standard
I.S. EN 4674-003:2017 AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - SELF-WRAPPING SHIELDING (EMI) PROTECTIVE SLEEVE - PART 003: OPEN SLEEVE - INSIDE PRESSURIZED AREA - EMI PROTECTION 5 KA - TEMPERATURE RANGE -65 DEGREES C TO 200 DEGREES C - PRODUCT STANDARD
I.S. EN 4674-001:2017 AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - SELF-WRAPPING SHIELDING (EMI) PROTECTIVE SLEEVE - PART 001: TECHNICAL SPECIFICATION
PREN 2794-001 : 200P2 AEROSPACE SERIES - CIRCUIT BREAKERS, SINGLE-POLE, TEMPERATURE COMPENSATED, RATED CURRENT 20 A TO 50 A - PART 001: TECHNICAL SPECIFICATION
PREN 4691-1 : DRAFT 2015 AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - PART 1: TECHNICAL SPECIFICATION
EN 4691-1:2017 Aerospace series - Tie rod with integrated bolts - Part 1: Technical specification
I.S. EN 2833-005:2013 AEROSPACE SERIES - GLASS FIBRE THERMOSETTING PREIMPREGNATES - TECHNICAL SPECIFICATION - PART 005: GLASS FABRIC/PHENOLIC RESIN PREIMPREGNATE
I.S. EN 3774-001:2014 AEROSPACE SERIES - CIRCUIT BREAKERS, THREE-POLE, TEMPERATURE COMPENSATED, RATED CURRENTS 1 A TO 25 A - PART 001: TECHNICAL SPECIFICATION
I.S. EN 2665-001:2013 AEROSPACE SERIES - CIRCUIT BREAKERS, THREEPOLE, TEMPERATURE COMPENSATED, RATED CURRENT 20 A TO 50 A - PART 001: TECHNICAL SPECIFICATION
I.S. EN 3773-001:2014 AEROSPACE SERIES - CIRCUIT BREAKERS, SINGLE-POLE, TEMPERATURE COMPENSATED, RATED CURRENTS 1 A TO 25 A - PART 001: TECHNICAL SPECIFICATION
I.S. EN 4056-001:2015 AEROSPACE SERIES - CABLE TIES FOR HARNESSES - PART 001: TECHNICAL SPECIFICATION
I.S. EN 2794-001:2014 AEROSPACE SERIES - CIRCUIT BREAKERS, SINGLE-POLE, TEMPERATURE COMPENSATED, RATED CURRENT 20 A TO 50 A - PART 001: TECHNICAL SPECIFICATION
UNI EN 2794-001 : 2014 AEROSPACE SERIES - CIRCUIT BREAKERS, SINGLE-POLE, TEMPERATURE COMPENSATED, RATED CURRENT 20 A TO 50 A - PART 001: TECHNICAL SPECIFICATION
BS EN 6049-009:2016 Aerospace series. Electrical cables, installation. Protection sleeve in meta-aramid fibres Self-wrapping fire protection sleeve, flexible, post installation, operating temperature from -55 °C to 260 °C. Product standard
BS EN 4056-004:2014 Aerospace series. Cable ties for harnesses Plastic cable ties. For operating temperatures - 55°C to 105°C and - 55°C to 150°C. Product standard
12/30271082 DC : 0 BS EN 6049-001 - AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVE IN META-ARAMID FIBRES - PART 001: TECHNICAL SPECIFICATION
I.S. EN 4674-004:2017 AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - SELF-WRAPPING SHIELDING (EMI) PROTECTIVE SLEEVE - PART 004: OPEN SLEEVE - OUTSIDE PRESSURIZED AREA - EMI PROTECTION 10 KA - TEMPERATURE RANGE -65 DEGREES C TO 200 DEGREES C - PRODUCT STANDARD
BS EN 4674-001:2017 Aerospace series. Electrical cables, installation. Self-wrapping shielding (EMI) protective sleeve Technical specification
UNI EN 2833-005 : 2014 AEROSPACE SERIES - GLASS FIBRE THERMOSETTING PREIMPREGNATES - TECHNICAL SPECIFICATION - PART 005: GLASS FABRIC/PHENOLIC RESIN PREIMPREGNATE
PREN 4674-004 : 200P1 AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - SELF-WRAPPING SHIELDING (EMI) PROTECTIVE SLEEVE - PART 004: OPEN SLEEVE - OUTSIDE PRESSURIZED AREA - EMI PROTECTION 10 KA - TEMPERATURE RANGE -65 DEGREES C TO 200 DEGREES C - PRODUCT STANDARD
PREN 2833-1 : 200P2 AEROSPACE SERIES - GLASS FIBRE THERMOSETTING PREIMPREGNATES - TECHNICAL SPECIFICATION - PART 1: GENERAL REQUIREMENTS
I.S. EN 4691-1:2017 AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - PART 1: TECHNICAL SPECIFICATION
I.S. EN 6049-009:2016 AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVE IN META-ARAMID FIBRES - PART 009: SELF-WRAPPING FIRE PROTECTION SLEEVE, FLEXIBLE, POST INSTALLATION, OPERATING TEMPERATURE FROM -55 DEGREES C TO 260 DEGREES C - PRODUCT STANDARD
EN 6049-001:2015 Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 001: Technical specification
UNI EN 2665-001 : 2014 AEROSPACE SERIES - CIRCUIT BREAKERS, THREE-POLE, TEMPERATURE COMPENSATED, RATED CURRENT 20 A TO 50 A - PART 001: TECHNICAL SPECIFICATION
95/714421 DC : 0 PREN 2833-3 - AEROSPACE SERIES - GLASS FIBRE THERMOSETTING PREIMPREGNATES - TECHNICAL SPECIFICATION - PART 3: GLASS FABRIC/EPOXY RESIN PREIMPREGNATE CURING AT UP TO 180 DEGREE C FOR CONTINUOUS USE UP TO 120 DEGREE C
15/30322162 DC : 0 BS EN 4674-003 - AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - SELF-WRAPPING SHIELDING (EMI) PROTECTIVE SLEEVE - PART 003: OPEN SLEEVE - INSIDE PRESSURIZED AREA - EMI PROTECTION 5 KA TEMPERATURE RANGE -65 DEGREES C TO 200 DEGREES C - PRODUCT STANDARD
15/30334224 DC : 0 BS EN 6049-008 - AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION, PROTECTION SLEEVE IN META-ARAMID FIBRES - PART 008: SELF-WRAPPING SHIELDED (EMI) PROTECTIVE SLEEVE WITH NICKEL COPPER BRAID, FLEXIBLE POST INSTALLATION OPERATING TEMPERATURE FROM -55 DEGREE C TO 200 DEGREE C - PRODUCT STANDARD
PREN 4839-001 : DRAFT 2016 AEROSPACE SERIES - ARC FAULT CIRCUIT BREAKERS, THREE-POLE, TEMPERATURE COMPENSATED, RATED CURRENT 3 A TO 25 A 115 V A.C. 400 HZ CONSTANT FREQUENCY - PART 001: TECHNICAL SPECIFICATION
PREN 4674-001 : DRAFT 2015 AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - SELF-WRAPPING SHIELDING (EMI) PROTECTIVE SLEEVE - PART 001: TECHNICAL SPECIFICATION
PREN 2665-001 : 200P2 AEROSPACE SERIES - CIRCUIT BREAKERS, THREE-POLE, TEMPERATURE COMPENSATED, RATED CURRENT 20 A TO 50 A - PART 001: TECHNICAL SPECIFICATION
PREN 4056-001 : 200P2 AEROSPACE SERIES - CABLE TIES FOR HARNESSES - PART 001: TECHNICAL SPECIFICATION
I.S. EN 4056-006:2014 AEROSPACE SERIES - CABLE TIES FOR HARNESSES - PART 006: PEEK CABLE TIES - FOR OPERATING TEMPERATURES -55 DEGREES C TO 240 DEGREES C - PRODUCT STANDARD
EN 6049-008:2017 Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 008: Self-wrapping shielded (EMI) protective sleeve with nickel copper braid, flexible post installation operating temperature from -55 °C to 200 °C - Product standard
BS EN 4056-003:2016 Aerospace series. Cable ties for harnesses Plastic cable ties. Operating temperatures -65 °C to 105 °C and -65 °C to 150 °C. Product standard
BS EN 6049-001:2015 Aerospace series. Electrical cables, installation. Protection sleeve in meta-aramid fibres Technical specification
EN 4710-01:2015 Aerospace series - Quick release fastening systems for non-structural applications - Part 01: Technical specification
BS EN 3774-001:2014 Aerospace series. Circuit breakers, three-pole, temperature compensated, rated currents 1 A to 25 A Technical specification
BS EN 4056-001:2015 Aerospace series. Cable ties for harnesses Technical specification
BS EN 4691-1:2017 Aerospace series. Tie rod with integrated bolts Technical specification
EN 4674-003:2017 Aerospace series - Electrical cables, installation - Self-wrapping shielding (EMI) protective sleeve - Part 003: Open sleeve - Inside pressurized area - EMI protection 5 kA - Temperature range - 65 °C to 200 °C - Product standard
EN 6049-009:2016 Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 009: Self-wrapping fire protection sleeve, flexible, post installation, operating temperature from -55 °C to 260 °C - Product standard
EN 4674-001:2017 Aerospace series - Electrical cables, installation - Self-wrapping shielding (EMI) protective sleeve - Part 001: Technical specification
EN 3774-001:2014 Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 1 A to 25 A - Part 001: Technical specification
EN 2665-001:2013 Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A - Part 001: Technical specification
EN 2824:2011 Aerospace series - Burning behaviour of non-metallic materials under the influence of radiating heat and flames - Determination of smoke density and gas components in the smoke of materials - Test equipment apparatus and media
EN 4056-006 : 2014 AEROSPACE SERIES - CABLE TIES FOR HARNESSES - PART 006: PEEK CABLE TIES - FOR OPERATING TEMPERATURES -55 DEGREES C TO 240 DEGREES C - PRODUCT STANDARD
EN 4056-001:2015 Aerospace series - Cable ties for harnesses - Part 001: Technical specification
EN 3773-001:2014 Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A - Part 001: Technical specification
EN 2833-005:2013 Aerospace series - Glass fibre thermosetting preimpregnates - Technical specification - Part 005: Glass fabric/phenolic resin preimpregnate
EN 4056-004:2014 Aerospace series - Cable ties for harnesses - Part 004: Plastic cable ties - For operating temperatures - 55 °C to 105 °C and - 55 °C to 150 °C - Product standard
15/30331400 DC : 0 BS EN 4674-004 - AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - SELF-WRAPPING SHIELDING (EMI) PROTECTIVE SLEEVE - PART 004: OPEN SLEEVE - OUTSIDE PRESSURIZED AREA - EMI PROTECTION 10 KA - TEMPERATURE RANGE -65 DEGREES C TO 200 DEGREES C - PRODUCT STANDARD
14/30314814 DC : 0 BS EN 4674-001 - AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - SELF-WRAPPING SHIELDING (EMI) PROTECTIVE SLEEVE - PART 001: TECHNICAL SPECIFICATION
UNI EN 6049-006 : 2012 AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVE IN META-ARAMID FIBRES - PART 006: SELF-WRAPPING PROTECTIVE SLEEVE, FLEXIBLE POST INSTALLATION - PRODUCT STANDARD
BS EN 2824:2011 Aerospace series. Burning behaviour of non-metallic materials under the influence of radiating heat and flames. Determination of smoke density and gas components in the smoke of materials. Test equipment apparatus and media
BS EN 2833-005:2013 Aerospace series. Glass fibre thermosetting preimpregnates. Technical specification Glass fabric/phenolic resin preimpregnate
BS EN 4710-01:2015 Aerospace series. Quick release fastening systems for non-structural applications Technical specification
95/714422 DC : 0 PREN 2833-4 - AEROSPACE SERIES - GLASS FIBER THERMOSETTING PREIMPREGNATES - TECHNICAL SPECIFICATION - PART 4: UNIDIRECTIONAL GLASS/EPOXY RESIN PREIMPREGNATE CURING AT UP TO 125 DEGREE C FOR CONTINUOUS USE UP TO 80 DEGREE C
PREN 4674-003 : 200P2 AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - SELF-WRAPPING SHIELDING (EMI) PROTECTIVE SLEEVE - PART 003: OPEN SLEEVE - INSIDE PRESSURIZED AREA - EMI PROTECTION 5 KA - TEMPERATURE RANGE -65 DEGREES C TO 200 DEGREES C - PRODUCT STANDARD
PREN 4056-006 : DRAFT 2012 AEROSPACE SERIES - CABLE TIES FOR HARNESSES - PART 006: PEEK CABLE TIES - FOR OPERATING TEMPERATURES -55 DEGREES C TO 240 DEGREES C - PRODUCT STANDARD
PREN 4056-004 : DRAFT 2013 AEROSPACE SERIES - CABLE TIES FOR HARNESSES - PART 004: PLASTIC CABLE TIES - FOR OPERATING TEMPERATURES -55 DEGREES C TO 105 DEGREES C AND -55 DEGREES C TO 150 DEGREES C - PRODUCT STANDARD
PREN 2833-4 : 200P1 AEROSPACE SERIES - GLASS FIBRE THERMOSETTING PREIMPREGNATES - TECHNICAL SPECIFICATION - PART 4: UNIDIRECTIONAL GLASS/EPOXY RESIN PREIMPREGNATE CURING AT UP TO 125 DEGREES C FOR CONTINUOUS USE UP TO 80 DEGREES C
PREN 3773-001 : 200P2 AEROSPACE SERIES - CIRCUIT BREAKERS, SINGLE-POLE, TEMPERATURE COMPENSATED, RATED CURRENTS 1 A TO 25 A - PART 001: TECHNICAL SPECIFICATION
PREN 4056-003 : 200P2 AEROSPACE SERIES - CABLE TIES FOR HARNESSES - PART 003: PLASTIC CABLE TIES - OPERATING TEMPERATURES -65 DEGREES C TO 105 DEGREES C AND -65 DEGREES C TO 150 DEGREES C - PRODUCT STANDARD
PREN 6049-008 : 200P3 AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVE IN META-ARAMID FIBRES - PART 008: SELF-WRAPPING SHIELDED (EMI) PROTECTIVE SLEEVE WITH NICKEL COPPER BRAID, FLEXIBLE POST INSTALLATION OPERATING TEMPERATURE FROM -55 DEGREES C TO 200 DEGREES C - PRODUCT STANDARD
I.S. EN 2824:2011 AEROSPACE SERIES - BURNING BEHAVIOUR OF NON-METALLIC MATERIALS UNDER THE INFLUENCE OF RADIATING HEAT AND FLAMES - DETERMINATION OF SMOKE DENSITY AND GAS COMPONENTS IN THE SMOKE OF MATERIALS - TEST EQUIPMENT APPARATUS AND MEDIA
UNI EN 6049-007 : 2012 AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVE IN META-ARAMID FIBRES - PART 007: SELF-WRAPPING MECHANICAL AND ELECTRICAL PROTECTIVE SLEEVE, FLEXIBLE POST INSTALLATION OPERATING TEMPERATURE FROM - 55 DEGREES C TO 260 DEGREES C - PRODUCT STANDARD
I.S. EN 6049-008:2017 AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTIVE SLEEVES IN META-ARAMID FIBRES - PART 008: SELF-WRAPPING SHIELDED (EMI) PROTECTIVE SLEEVE WITH NICKEL COPPER BRAID, FLEXIBLE POST INSTALLATION OPERATING TEMPERATURE FROM -55 DEGREES C TO 200 DEGREES C - PRODUCT STANDARD
I.S. EN 6049-001:2015 AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVE IN META-ARAMID FIBRES - PART 001: TECHNICAL SPECIFICATION
I.S. EN 4710-01:2015 AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL APPLICATIONS - PART 01: TECHNICAL SPECIFICATION
I.S. EN 4056-004:2014 AEROSPACE SERIES - CABLE TIES FOR HARNESSES - PART 004: PLASTIC CABLE TIES - FOR OPERATING TEMPERATURES -55 DEGREES C TO 105 DEGREES C AND -55 DEGREES C TO 150 DEGREES C - PRODUCT STANDARD
BS EN 2665-001:2013 Aerospace series. Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A Technical specification
BS EN 3773-001:2014 Aerospace series. Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A Technical specification

ISO 13943:2017 Fire safety — Vocabulary
EN ISO 13943:2017 Fire safety - Vocabulary (ISO 13943:2017)
PREN 2825 : 200P1 AEROSPACE SERIES - BURNING BEHAVIOUR OF NON METALLIC MATERIALS UNDER THE INFLUENCE OF RADIATING HEAT AND FLAMES - DETERMINATION OF SMOKE DENSITY
PREN 2824 : 200P1 AEROSPACE SERIES - BURNING BEHAVIOUR OF NON METALLIC MATERIALS UNDER THE INFLUENCE OF RADIATING HEAT AND FLAMES - DETERMINATION OF SMOKE DENSITY AND GAS COMPONENTS IN THE SMOKE OF MATERIALS - TEST EQUIPMENT, APPARATUS AND MEDIA

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.