• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 45011:1998

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

General requirements for bodies operating product certification systems (ISO/IEC Guide 65:1996)
Superseded date

01-09-2012

Published date

18-02-1998

1 Scope
2 References
3 Definitions
4 Certification body
   4.1 General provisions
   4.2 Organization
   4.3 Operations
   4.4 Subcontracting
   4.5 Quality system
   4.6 Conditions and procedures for granting, maintaining,
        extending, suspending and withdrawing certification
   4.7 Internal audits and management review
   4.8 Documentation
   4.9 Records
   4.10 Confidentiality
5 Certification body personnel
   5.1 General
   5.2 Qualification criteria
6 Changes in the certification requirements
7 Appeals, complaints and disputes
8 Application for certification
   8.1 Information on the procedure
   8.2 The application
9 Preparation for evaluation
10 Evaluation
11 Evaluation report
12 Decision on certification
13 Surveillance
14 Use of licences, certificates and marks of conformity
15 Complaints to suppliers
Annex ZA (normative) Normative references to international
                     publications with their relevant
                     European publications

This document specifies general requirements that a third party operating a product certification system shall meet if it is to be recognized as competent and reliable. In this document the term certification body is used to cover any body operating a product certification system. The word product is used in its widest sense and includes processes and services; the word standard is used to include other normative documents, specifications or technical regulations.

Committee
CEN/CLC/JTC 1
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Superseded
SupersededBy

Standards Relationship
NF EN 45011 : 1998 Corresponds
BS EN 45011:1998 Identical
SN EN 45011 : 1998 Identical
NEN EN 45011 : 1998 Identical
BS 7511:1989 Corresponds
PN EN 45011 : 2000 Identical
NBN EN 45011 : 1998 Identical
ISO/IEC Guide 65:1996 Identical
UNE-EN 45011:1998 Identical
DIN EN 45011:1990-05 Identical
UNI CEI EN 45011 : 1999 Corresponds
NS EN 45011 : 2ED 1998 Identical
I.S. EN 45011:1998 Identical

UNI CEN/TS 13476-4 : 2013 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYLS CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 4: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
EN 773:1999 General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers
EN 450-2:2005 Fly ash for concrete - Part 2: Conformity evaluation
CEN/TS 1456-2:2003 Plastics piping systems for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity
I.S. EN 14382:2005 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
EN 15167-2:2006 Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 2: Conformity evaluation
UNI EN 969 : 2009 DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR GAS PIPELINES - REQUIREMENTS AND TEST METHODS
EN 681-1:1996/A3:2005 ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER
EN 12094-13:2001/AC:2002 FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 13: REQUIREMENTS AND TEST METHODS FOR CHECK VALVES AND NON-RETURN VALVES
EN 13616:2004/AC:2006 OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID PETROLEUM FUELS
EN 50380:2017 Marking and documentation requirements for Photovoltaic Modules
EN 12094-12:2003 Fixed firefighting systems - Components for gas extinguishing systems - Part 12: Requirements and test methods for pneumatic alarm devices
PD CEN/TS 13598-3:2012 Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride)(PVC-U), polypropylene (PP) and polyethylene (PE) Guidance for assessment of conformity
EN 969:2009 Ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods
BS EN 13380:2001 General requirements for components used for renovation and repair of drain and sewer systems outside buildings
EN 50090-8:2000 Home and Building Electronic Systems (HBES) - Part 8: Conformity assessment of products
I.S. EN 15267-1:2009 AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 1: GENERAL PRINCIPLES
EN 14525:2004 Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, Steel, PVC-U PE, Fibre-cement
EN 12094-16:2003 Fixed firefighting systems - Components for gas extinguishing systems - Part 16: Requirements and test methods for odorizing devices for CO2 low pressure systems
ONORM EN 15267-1 : 2009 AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 1: GENERAL PRINCIPLES
CEN/TS 1451-2:2012 Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity
CEN/TS 1565-2:2012 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Styrene-copolymer blends (SAN+PVC) - Part 2: Guidance for the assessment of conformity
EN 12101-1:2005/A1:2006 SMOKE AND HEAT CONTROL SYSTEMS - PART 1: SPECIFICATION FOR SMOKE BARRIERS
CEN/TS 1555-7:2013 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity
EN 545:2010 Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
UNI EN 15167-2 : 2006 GROUND GRANULATED BLAST FURNACE SLAG FOR USE IN CONCRETE, MORTAR AND GROUT - PART 2: CONFORMITY EVALUATION
CR 14245:2001 Guidelines for the application of EN 197-2 "Conformity Evaluation"
UNI EN 545 : 2010 DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR WATER PIPELINES - REQUIREMENTS AND TEST METHODS
CEN/TS 14632:2012 Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the assessment of conformity
CEN/TR 15840:2009 Evaluation of conformity of fly ash for concrete - Guidelines for the application of EN 450-2
CEN/TR 15545:2006 Guide to the use of EN 545
CEN/TS 13476-4:2013 Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 4: Guidance for the assessment of conformity
EN 12094-4:2004 Fixed firefighting systems - Components for gas extinguishing systems - Part 4: Requirements and test methods for container valve assemblies and their actuators
DD ENV 206:1992 Concrete. Performance, production, placing and compliance criteria
EN 15655:2009 Ductile iron pipes, fittings and accessories - Internal polyurethane lining for pipes and fittings - Requirements and test methods
EN 1917:2002/AC:2008 CONCRETE MANHOLES AND INSPECTION CHAMBERS, UNREINFORCED, STEEL FIBRE AND REINFORCED
EN 61400-22:2011 Wind turbines - Part 22: Conformity testing and certification
UNI EN 1916 : 2004 CONCRETE PIPES AND FITTINGS, UNREINFORCED, STEEL FIBRE AND REINFORCED
EN 12842:2012 Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods
UNI EN 13616 : 2004 OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID PETROLEUM FUELS
EN 12094-2:2003 Fixed firefighting systems - Components for gas extinguishing systems - Part 2: Requirements and test methods for non-electrical automatic control and delay devices
UNI CEN/TS 14632 : 2012 PLASTICS PIPING SYSTEMS FOR DRAINAGE, SEWERAGE AND WATER SUPPLY, PRESSURE AND NON-PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - GUIDANCE FOR THE ASSESSMENT OF CONFORMITTY
EN 12094-9:2003 Fixed firefighting systems - Components for gas extinguishing systems - Part 9: Requirements and test methods for special fire detectors
EN 14409-1:2004 Plastics piping systems for renovation of underground water supply networks - Part 1: General
CEN ISO/TS 15875-7:2003 Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 7: Guidance for the assessment of conformity (ISO/TS 15875-7:2003)
PD CEN/TS 14632:2012 Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Guidance for the assessment of conformity
CEN/TS 13598-3:2012 Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride)(PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Guidance for assessment of conformity
EN 13566-1:2002 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General
EN 1293:1999 General requirements for components used in pneumatically pressurized discharge pipes, drains and sewers
ENV 1452-7:2000 Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 7: Guidance for the assessment of conformity
EN 50090-2-2:1996/A2:2007 HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-2: SYSTEM OVERVIEW - GENERAL TECHNICAL REQUIREMENTS
EN 877:1999/A1:2006/AC:2008 CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE
EN 805:2000 Water supply - Requirements for systems and components outside buildings
EN 12094-10:2003 Fixed firefighting systems - Components for gas extinguishing systems - Part 10: Requirements and test methods for pressure gauges and pressure switches
CEN/TS 12666-2:2012 Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 2: Guidance for the assessment of conformity
EN 12094-1:2003 Fixed firefighting systems - Components for gas extinguishing systems - Part 1: Requirements and test methods for electrical automatic control and delay devices
EN 1916:2002/AC:2008 CONCRETE PIPES AND FITTINGS, UNREINFORCED, STEEL FIBRE AND REINFORCED
EN 1279-6:2002 Glass in building - Insulating glass units - Part 6: Factory production control and periodic tests
CEN ISO/TS 25377:2007 Hydrometric uncertainty guidance (HUG) (ISO/TS 25377:2007)
EN 12094-7:2000/A1:2005 FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 7: REQUIREMENTS AND TEST METHODS FOR NOZZLES FOR CO[2] SYSTEMS
EN 50518-3:2013 MONITORING AND ALARM RECEIVING CENTRE - PART 3: PROCEDURES AND REQUIREMENTS FOR OPERATION
EN 15267-1:2009 Air quality - Certification of automated measuring systems - Part 1: General principles
PD CEN/TS 1455-2:2012 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Acrylonitrile-butadiene-styrene (ABS) Guidance for the assessment of conformity
BS EN 805:2000 Water supply. Requirements for systems and components outside buildings
DD CEN/TS 13244-7:2003 Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage. Polyethylene (PE) Guidance for the assessment of conformity
PD CEN/TR 15545:2006 Guide to the use of EN 545
UNI EN 15267-1 : 2009 AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 1: GENERAL PRINCIPLES
EN 12094-3:2003 Fixed firefighting systems - Components for gas extinguishing systems - Part 3: Requirements and test methods for manual triggering and stop devices
EN 14408-1:2004 Plastics piping systems for renovation of underground gas supply networks - Part 1: General
CEN/TR 16017:2010 Guide to the use of EN 598
EN 15189:2006 Ductile iron pipes, fittings and accessories - External polyurethane coating for pipes - Requirements and test methods
EN 12839:2012 Precast concrete products - Elements for fences
DIN EN 12094-8:2016-06 (Draft) FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 8: REQUIREMENTS AND TEST METHODS FOR CONNECTORS
BS EN 12094-13:2001 Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for check valves and non-return valves
CEN/TS 1401-2:2012 Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for assessment of conformity
BS EN 50380:2017 Marking and documentation requirements for Photovoltaic Modules
DIN EN 14525:2005-02 Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: Ductile iron, grey iron, steel, PVC-U, PE, fibre-cement
EN 334:2005+A1:2009 Gas pressure regulators for inlet pressures up to 100 bar
BS EN 15167-2:2006 Ground granulated blast furnace slag for use in concrete, mortar and grout Conformity evaluation
BS EN 1917:2002 Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced
DIN EN 12094-11:2003-07 FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 11: REQUIREMENTS AND TEST METHODS FOR MECHANICAL WEIGHING DEVICES
BS EN 877 : 1999 CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE
BS EN 12094-16:2003 Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for odorizing devices for CO<sub>2</sub> low pressure systems
BS EN 12101-1 : 2006 SMOKE AND HEAT CONTROL SYSTEMS - PART 1: SPECIFICATION FOR SMOKE BARRIERS
BS EN 1279-6:2002 Glass in building. Insulating glass units Factory production control and periodic tests
PD CEN/TS 1565-2:2012 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Styrene-copolymer blends (SAN+PVC) Guidance for the assessment of conformity
DIN EN 12094-10:2003-09 Fixed firefighting systems - Components for gas extinguishing systems - Part 10: Requirements and test methods for pressure gauges and pressure switches; German version EN 12094-10:2003
DIN EN 15655:2016-07 (Draft) DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - INTERNAL POLYURETHANE LINING FOR PIPES AND FITTINGS - REQUIREMENTS AND TEST METHODS
BS EN 14525:2004 Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, grey iron, steel, PVC-U, PE, fibre-cement
DD ENV 1453-2:2001 Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for the assessment of conformity
DD ENV 1250-2:1995 Wood preservatives. Methods of measuring losses of active ingredients and other preservative ingredients from treated timber Laboratory method for obtaining samples for analysis to measure losses by leaching into water or synthetic sea water
BS EN 598 : 2007 DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS
BS EN 1916:2002 Concrete pipes and fittings, unreinforced, steel fibre and reinforced
BS EN 13566-1:2002 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks General
PD CEN/TS 1566-2:2012 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Chlorinated poly(vinyl chloride) (PVC-C) Guidance for assessment of conformity
DD CEN ISO/TS 25377:2007 Hydrometric uncertainty guide
DD ENV 1401-2:2001 Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinylchloride) (PVC-U) Guidance for assessment of conformity
BS EN 12094-11:2003 Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for mechanical weighing devices
DD ENV 1452-7:2001 Plastics piping systems for water supply. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for the assessment of conformity
DD ENV 1519-2:2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polyethylene (PE) Guidance for the assessment of conformity
DIN EN 12094-4:2004-10 Fixed firefighting systems - Components for gas extinguishing systems - Part 4: Requirements and test methods for container valve assemblies and their actuators; German version EN 12094-4:2004
DD ENV 1565-2:2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Styrene copolymer blends (SAN + PVC) Guidance for the assessment of conformity
CEN/TS 1566-2:2012 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Guidance for assessment of conformity
CEN/TS 1455-2:2012 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 2: Guidance for the assessment of conformity
DIN EN 12842:2012-11 Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods
DIN EN 1917:2003-04 CONCRETE MANHOLES AND INSPECTION CHAMBERS, UNREINFORCED, STEEL FIBRE AND REINFORCED
UNE-EN 50380:2003 Datasheet and nameplate information for photovoltaic modules
DIN EN 15267-1:2009-07 Air quality - Certification of automated measuring systems - Part 1: General principles
UNE-EN 12839:2012 Precast concrete products - Elements for fences
DIN EN 14382:2016-05 (Draft) SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
DIN EN 12101-1:2006-06 Smoke and heat control systems - Part 1: Specification for smoke barriers
DIN EN 12094-9:2003-07 FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 9: REQUIREMENTS AND TEST METHODS FOR SPECIAL FIRE DETECTORS
DIN EN 598:2009-10 Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods (includes Amendment A1:2009)
DIN EN 12094-6:2006-07 Fixed firefighting systems - Components for gas extinguishing systems - Part 6: Requirements and test methods for non-electrical disable devices
DIN EN 14408-1:2004-12 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 1: GENERAL
BS EN 12842:2012 Ductile iron fittings for PVC-U or PE piping systems. Requirements and test methods
PD CEN/TS 13476-4:2013 Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Guidance for the assessment of conformity
DIN EN 545:2011-09 Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
ISO/TS 15875-7:2003 Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 7: Guidance for the assessment of conformity
DIN EN 877:2010-01 Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance (includes Amendment A1:2006 and Corrigendum AC:2008)
ISO/TS 15876-7:2003 Plastics piping systems for hot and cold water installations Polybutylene (PB) Part 7: Guidance for the assessment of conformity
CEN/TS 16214-2:2014 Sustainability criteria for the production of biofuels and bioliquids for energy applications - Principles, criteria, indicators and verifiers - Part 2: Conformity assessment including chain of custody and mass balance
ISO 10381-1:2002 Soil quality Sampling Part 1: Guidance on the design of sampling programmes
DIN EN 969:2009-07 DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR GAS PIPELINES - REQUIREMENTS AND TEST METHODS
UNE-EN 12842:2013 Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods
DIN EN 12094-5:2006-07 Fixed firefighting systems - Components for gas extinguishing systems - Part 5: Requirements and test methods for high and low pressure selector valves and their actuators
BS EN 334 : 2005 GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
PD CEN/TS 1451-2:2012 Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP) Guidance for the assessment of conformity
DIN EN 12094-3:2003-07 FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 3: REQUIREMENTS AND TEST METHODS FOR MANUAL TRIGGERING AND STOP DEVICES
DD ENV 1566-2:2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Chlorinated poly(vinyl chloride) (PVC-C) Guidance for the assessment of conformity
BS EN 12839:2012 Precast concrete products. Elements for fences
DIN EN 681-1:2006-11 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber
DIN EN 334:2016-05 (Draft) GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
DD ENV ISO 14907-1:2001 Road transport and traffic telematics (RTTT). Electronic fee collection (EFC). Test procedures for user and fixed equipment Description of test procedures
BS ISO 10381-1:2002 Soil quality. Sampling Guidance on the design of sampling programmes
PD CEN/TS 1329-2:2012 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for the assessment of conformity
DD ENV 1852-2:2001 Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP) Guidance for the assessment of conformity
BS EN 13980:2002 Potentially explosive atmospheres. Application of quality systems
PD CEN/TS 1519-2:2012 Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure. Polyethylen (PE) Guidance for the assessment of conformity
DIN EN 12094-8:2006-07 Fixed firefighting systems - Components for gas extinguishing systems - Part 8: Requirements and test methods for connectors
BS EN 15267-1:2009 Air quality. Certification of automated measuring systems General principles
PD CEN/TR 16017:2010 Guide to the use of EN 598
BS EN 3-6:1996 Portable fire extinguishers Provisions for the attestation of conformity of portable fire extinguishers in accordance with EN 3 Part 1 to Part 5
DD CEN/TS 14758-2:2007 Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene with mineral modifier(s) (PP-MD) Guidance for the assessment of conformity
BS EN 14408-1:2004 Plastics piping systems for renovation of underground gas supply networks General
BS EN 12094-3:2003 Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for manual triggering and stop devices
BS EN 681-1:1996 Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications Vulcanized rubber
BS EN 12094-9:2003 Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for special fire detectors
BS EN 545:2010 Ductile iron pipes, fittings, accessories and their joints for water pipelines. Requirements and test methods
DD ENV 1329-2:2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for the assessment of conformity
PD CEN/TS 12666-2:2012 Plastics piping systems for non-pressure underground drainage and sewerage. Polyethylene (PE) Guidance for the assessment of conformity
I.S. EN 14525:2005 DUCTILE IRON WIDE TOLERANCE COUPLINGS AND FLANGE ADAPTORS FOR USE WITH PIPES OF DIFFERENT MATERIALS: DUCTILE IRON, GREY IRON, STEEL, PVC-U PE, FIBRE-CEMENT
DD CEN/TS 12201-7:2003 Plastics piping systems for water supply. Polyethylene (PE) Guidance for the assessment of conformity
DIN EN 12839:2012-03 PRECAST CONCRETE PRODUCTS - ELEMENTS FOR FENCES
BS EN 12094-12:2003 Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for pneumatic alarm devices
BS EN 969:2009 Ductile iron pipes, fittings, accessories and their joints for gas pipelines. Requirements and test methods
ISO/TS 15874-7:2003 Plastics piping systems for hot and cold water installations Polypropylene (PP) Part 7: Guidance for the assessment of conformity
DD CEN/TS 14632:2006 Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure. Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP). Guidance for the assessment of conformity
BS EN 1898:2001 Specifications for flexible intermediate bulk containers (FIBCs) for non-dangerous goods
UNE-CEN/TS 1555-7:2015 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity
DIN EN 681-1:2016-07 (Draft) Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber; German and English version prEN 681-1:2016
DIN EN 12094-2:2003-09 Fixed firefighting systems - Components for gas extinguishing systems - Part 2: Requirements and test methods for non-electrical automatic control and delay devices; German version EN 12094-2:2003
DD CEN/TS 12666-2:2005 Plastics piping systems for non-pressure underground drainage and sewerage. Polyethylene (PE) Guidance for the assessment of conformity
PD CEN/TS 1401-2:2012 Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for assessment of conformity
BS EN 50090-8:2001 Home and building electronic systems (HBES) Conformity assessment of products
BS EN 15189:2006 Ductile iron pipes, fittings and accessories. External polyurethane coating for pipes. Requirements and test methods
DD CEN ISO/TS 15874-7:2003 Plastics piping systems for hot and cold water installations. Polypropylene (PP) Guidance for the assessment of conformity
EN 14382:2005+A1:2009/AC:2009 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
UNE-EN 545:2011 Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
BS 8404:2001 Packaging. Child-resistant packaging. Requirements and testing procedures for non-reclosable packages for pharmaceutical products
DD CEN ISO/TS 15876-7:2003 Plastics piping systems for hot and cold water installations. Polybutylene (PB) Guidance for the assessment of conformity
BS EN 50518-3:2013 Monitoring and alarm receiving centre Procedures and requirements for operation
BS EN 450-2:2005 Fly ash for concrete Conformity evaluation
BS EN 15655:2009 Ductile iron pipes, fittings and accessories. Internal polyurethane lining for pipes and fittings. Requirements and test methods
DD ENV 1451-2:2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP) Guidance for the assessment of conformity
CEN/TS 1519-2:2012 Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylen (PE) - Part 2: Guidance for the assessment of conformity
DD CEN/TS 1852-2:2009 Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP) Guidance for the assessment of conformity
BS EN 12094-6:2006 Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for non-electrical disable devices
PD CEN/TS 16214-2:2014 Sustainability criteria for the production of biofuels and bioliquids for energy applications. Principles, criteria, indicators and verifiers Conformity assessment including chain of custody and mass balance
BS EN 12094-4:2004 Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for container valve assemblies and their actuators
BS EN 12094-5:2006 Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for high and low pressure selector valves and their actuators
DD CEN/TS 13476-4:2008 Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Guidance for the assessment of conformity
BS EN 12094-10:2003 Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for pressure gauges and pressure switches
BS EN 773:1999 General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers
PD CEN/TR 15840:2009 Evaluation of conformity of fly ash for concrete. Guidelines for the application of EN 450-2
DD ENV 1455-2:2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Acrylonitrile-butadiene- styrene (ABS) Guidance for the assessment of conformity
BS EN 12094-8:2006 Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for connectors
BS EN 12094-7:2001 Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for nozzles for CO2 systems
DD CEN/TS 12200-2:2003 Plastics rainwater piping systems for above ground external use. Unplasticized poly (vinyl chloride) (PVC-U) Guidance for the assessment of conformity
DIN EN 15189:2007-02 Ductile iron pipes, fittings and accessories - External polyurethane coating for pipes - Requirements and test methods
UNE-EN 50518-3:2013 Monitoring and alarm receiving centre - Part 3: Procedures and requirements for operation
DIN EN 450-2:2005-05 Fly ash for concrete - Part 2: Conformity evaluation
EN 12094-5:2006 Fixed firefighting systems - Components for gas extinguishing systems - Part 5: Requirements and test methods for high and low pressure selector valves and their actuators
EN 12094-8:2006 Fixed firefighting systems - Components for gas extinguishing systems - Part 8: Requirements and test methods for connectors
BS EN 50090-2-2 : 1997 HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-2: SYSTEM OVERVIEW - GENERAL TECHNICAL REQUIREMENTS
DIN ISO 10381-1:2003-08 SOIL QUALITY - SAMPLING - PART 1: GUIDANCE ON THE DESIGN OF SAMPLING PROGRAMMES
DD CEN/TS 1555-7:2003 Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Guidance for the assessment of conformity
UNE-EN 61400-22:2011 Wind turbines - Part 22: Conformity testing and certification
DD CEN ISO/TS 15875-7:2003 Plastics piping systems for hot and cold water installations. Crosslinked polyethylene (PE-X) Guidance for the assessment of conformity
ISO/TS 25377:2007 Hydrometric uncertainty guidance (HUG)
DIN EN 1916:2003-04 CONCRETE PIPES AND FITTINGS, UNREINFORCED, STEEL FIBRE AND REINFORCED
BS EN 1293:1999 General requirements for components used in pneumatically pressurized discharge pipes, drains and sewers
BS EN 14409-1:2004 Plastics piping systems for renovation of underground water supply networks General
DD CEN/TS 1456-2:2003 Plastic piping systems for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for the assessment of conformity
BS EN 13616:2004 Overfill prevention devices for static tanks for liquid petroleum fuels
PD CEN/TS 1555-7:2013 Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Guidance for the assessment of conformity
DIN V 1201:2004-08 CONCRETE PIPES AND FITTINGS, UNREINFORCED, STEEL FIBRE AND REINFORCED FOR DRAINS AND SEWERS - TYPE 1 AND TYPE 2 - REQUIREMENTS, TEST METHODS AND EVALUATION OF CONFORMITY
BS EN 12094-1:2003 Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for electrical automatic control and delay devices
DD ENV 197-2:1996 Cement Conformity evaluation
BS EN 14382 : 2005 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
UNI EN 14525 : 2005 DUCTILE IRON WIDE TOLERANCE COUPLINGS AND FLANGE ADAPTORS FOR USE WITH PIPES OF DIFFERENT MATERIALS: DUCTILE IRON, GREY IRON, STEEL, PVC-U PE, FIBRE-CEMENT
EN 598:2007+A1:2009 Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods
EN 12094-6:2006 Fixed firefighting systems - Components for gas extinguishing systems - Part 6: Requirements and test methods for non-electrical disable devices
BS EN 12094-2:2003 Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for non-electrical automatic control and delay devices
ISO 16003:2008 Components for fire-extinguishing systems using gas— Requirements and test methods — Container valve assemblies and their actuators; selector valves and their actuators; nozzles; flexible and rigid connectors; and check valves and non-return valves
S.R. CEN/TS 1566-2:2012 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 2: GUIDANCE FOR ASSESSMENT OF CONFORMITY
UNI CEN/TS 1455-2 : 2012 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
S.R. CEN/TS 1455-2:2012 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
S.R. CEN/TS 14632:2012 PLASTICS PIPING SYSTEMS FOR DRAINAGE, SEWERAGE AND WATER SUPPLY, PRESSURE AND NON-PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
EN 13380:2001 General requirements for components used for renovation and repair of drain and sewer systems outside buildings
UNI CEN/TS 1566-2 : 2012 PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - CHORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 2: GUIDANCE FOR ASSESSMENT OF CONFORMITY
PD CR 14245:2001 Guidelines for the application of EN 197-2. Conformity Evaluation
EN 13980:2002 Potentially explosive atmospheres - Application of quality systems

ISO/IEC Guide 62:1996 General requirements for bodies operating assessment and certification/registration of quality systems
ISO 10011-1:1990 Guidelines for auditing quality systems Part 1: Auditing
ISO 8402:1994 Quality management and quality assurance — Vocabulary
ISO/IEC Guide 25:1990 General requirements for the competence of calibration and testing laboratories
ISO/IEC Guide 23:1982 Methods of indicating conformity with standards for third-party certification systems
EN 30011-1 : 1993 GUIDELINES FOR AUDITING QUALITY SYSTEMS - AUDITING
EN 45020:2006 Standardization and related activities - General vocabulary (ISO/IEC Guide 2:2004)
ISO/IEC Guide 2:2004 Standardization and related activities General vocabulary
EN ISO 8402 : 1995 QUALITY MANAGEMENT AND QUALITY ASSURANCE - VOCABULARY
ISO/IEC Guide 28:2004 Conformity assessment Guidance on a third-party certification system for products
EN 45020 : 2006 STANDARDIZATION AND RELATED ACTIVITIES - GENERAL VOCABULARY
EN 45012 : 1998 GENERAL REQUIREMENTS FOR BODIES OPERATING ASSESSMENT AND CERTIFICATION/REGISTRATION OF QUALITY SYSTEMS
ISO/IEC Guide 39:1988 General requirements for the acceptance of inspection bodies
ISO/IEC Guide 7:1994 Guidelines for drafting of standards suitable for use for conformity assessment
EN 45004 : 1995 GENERAL CRITERIA FOR THE OPERATION OF VARIOUS TYPES OF BODIES PERFORMING INSPECTION
ISO/IEC Guide 53:2005 Conformity assessment Guidance on the use of an organization's quality management system in product certification
EN 45001 : 1989 GENERAL CRITERIA FOR THE OPERATION OF TESTING LABORATORIES

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.