• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 771-1:2011+A1:2015

Current
Current

The latest, up-to-date edition.

Specification for masonry units - Part 1: Clay masonry units
Published date

19-08-2015

European foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Materials and manufacture
5 Requirements for clay masonry units
6 Description, designation, designation code
  and classification of clay masonry units
7 Marking
8 Assessment and verification of constancy of performance
  (AVCP)
Annex A (normative) - Sampling for product type
        determination tests and for independent
        testing of consignments
Annex B (informative) - Additional information
Annex C (informative) - Guidelines for test frequencies
        for designing a FPC system to demonstrate conformity
         of finished products with the requirements of
         the standard and the declaration of the manufacturer
Annex ZA (informative) - Clauses of this European Standard
         addressing the provisions of the EU Construction
         Products Regulation
Bibliography

This European Standard specifies the characteristics and performance requirements for masonry units manufactured from clay for which the main intended uses are protected or unprotected masonry structure (see definitions 3.3 and 3.4) (e.g. facing and rendered masonry, loadbearing or non-loadbearing masonry structures, including internal linings and partitions, for building and civil engineering).(...)This European Standard includes those clay masonry units of an overall non-rectangular parallelepiped shape.It defines the performance related to e.g. dimensional tolerances, strength, density measured according to the corresponding test methods contained in separate European Standards.It provides for the assessment and verification of constancy of performance (AVCP) of the product to this European Standard.The marking requirement for products covered by this European Standard is included.This European Standard does not specify standard sizes for clay masonry units, nor does it specify standard work dimensions, angles and radii of specially shaped clay masonry units. This European Standard does not include method of measurement of angles and radii characteristics of specially shaped clay masonry units.This European Standard does not cover requirements for the following: units for paving, flue liners and storey height clay masonry units and clay masonry units with an incorporated thermal insulation material bonded to the faces of the unit susceptible to be exposed to fire. It does, however, include clay masonry units for external chimney masonry.

Committee
CEN/TC 125
DevelopmentNote
Supersedes PREN 771-1. (08/2011) 2011 Edition Re-Issued in August 2015 & incorporates AMD 1 2015. (08/2015)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current
SupersededBy
Supersedes

DIN 105-100:2012-01 CLAY MASONRY UNITS - PART 100: CLAY MASONRY UNITS WITH SPECIFIC PROPERTIES
I.S. EN 1996-1-2:2005 EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN (INCLUDING IRISH NATIONAL ANNEX)
DIN EN 15037-3:2011-07 Precast concrete products - Beam-and-block floor systems - Part 3: Clay blocks (includes Amendment A1:2011)
CEN/TR 16886 : 2016 GUIDANCE ON THE APPLICATION OF STATISTICAL METHODS FOR DETERMINING THE PROPERTIES OF MASONRY PRODUCTS
00/106850 DC : DRAFT OCT 2000 PREN 13914-1 - THE DESIGN, PREPARATION AND APPLICATION OF EXTERNAL RENDERING AND INTERNAL PLASTERING - EXTERNAL RENDERING
10/30212126 DC : 0 BS EN 845-2 - SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS
I.S. EN 15080-12:2011 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - PART 12: LOADBEARING MASONRY WALLS
PREN 13914-1 : DRAFT 2013 DESIGN, PREPARATION AND APPLICATION OF EXTERNAL RENDERING AND INTERNAL PLASTERING - PART 1: EXTERNAL RENDERING
15/30326160 DC : 0 BS EN 16951-1 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTIC CHARACTERISTICS
DIN EN 771-6:2015-11 SPECIFICATION FOR MASONRY UNITS - PART 6: NATURAL STONE MASONRY UNITS
DIN EN 772-2:2005-05 METHODS OF TEST FOR MASONRY UNITS - PART 2: DETERMINATION OF PERCENTAGE AREA OF VOIDS IN MASONRY UNITS (BY PAPER INDENTATION)
DIN EN 1996-1-2:2011-04 Eurocode 6: Design of masonry structures - Part 1-2: General rules - Structural fire design (includes Corrigendum AC:2010)
BS EN 1015-9:1999 Methods of test for mortar for masonry Determination of workable life and correction time of fresh mortar
BS EN 846-8:2000 Methods of test for ancillary components for masonry Determination of load capacity and load-deflection characteristics of joist hangers
UNE-EN 772-5:2016 Methods of test for masonry units - Part 5: Determination of the active soluble salts content of clay masonry units
DIN EN 15254-2:2009-10 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 2: MASONRY AND GYPSUM BLOCKS
EN 1015-9:1999/A1:2006 METHODS OF TEST FOR MORTAR FOR MASONRY - PART 9: DETERMINATION OF WORKABLE LIFE AND CORRECTION TIME OF FRESH MORTAR
CEN/TS 772-22:2006 Methods of test for masonry units - Part 22: Determination of freeze/thaw resistance of clay masonry units
DIN EN 15287-2:2008-06 Chimneys - Design, installation and commissioning of chimneys - Part 2: Chimneys for roomsealed appliances
DIN EN 772-21:2011-07 Methods of test for masonry units - Part 21: Determination of water absorption of clay and calcium silicate masonry units by cold water absorption
10/30215389 DC : 0 BS EN 772-21 - METHODS OF TEST FOR MASONRY UNITS - PART 21: DETERMINATION OF WATER ABSORPTION OF CLAY AND CALCIUM SILICATE MASONRY UNITS BY COLD WATER ABSORPTION
13/30277104 DC : 0 BS EN 14389-1 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS
PREN 772-16 : DRAFT 2010 METHODS OF TEST FOR MASONRY UNITS - PART 16: DETERMINATION OF DIMENSIONS
08/30178840 DC : DRAFT AUG 2008 BS EN 15037-3 - PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 3: CLAY BLOCKS
BS EN 772-5:2016 Methods of test for masonry units Determination of the active soluble salts content of clay masonry units
PREN 14389-2 : DRAFT 2013 ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS
UNI EN 15080-12 : 2011 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - PART 12: LOADBEARING MASONRY WALLS
UNI EN 772-21 : 2011 METHODS OF TEST FOR MASONRY UNITS - PART 21: DETERMINATION OF WATER ABSORPTION OF CLAY AND CALCIUM SILICATE MASONRY UNITS BY COLD WATER ABSORPTION
UNI EN 15037-3 : 2011 PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 3: CLAY BLOCKS
NF EN 772-21 : 2011 METHODS OF TEST FOR MASONRY UNITS - PART 21: DETERMINATION OF WATER ABSORPTION OF CLAY AND CALCIUM SILICATE MASONRY UNITS BY COLD WATER ABSORPTION
BS EN 15037-3 : 2009 PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 3: CLAY BLOCKS
UNI EN 15287-2 : 2008 CHIMNEYS - DESIGN, INSTALLATION AND COMMISSIONING OF CHIMNEYS - PART 2: CHIMNEYS FOR ROOM-SEALED APPLIANCES
UNE-EN 15080-12:2011 Extended application of results from fire resistance tests - Part 12: Loadbearing masonry walls
DIN EN 772-11:2011-07 Methods of test for masonry units - Part 11: Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units
DIN EN 772-20:2005-05 METHODS OF TEST FOR MASONRY UNITS - PART 20: DETERMINATION OF FLATNESS OF FACES OF MASONRY UNITS
DIN EN 772-16:2011-07 Methods of test for masonry units - Part 16: Determination of dimensions
BS EN 772-1 : 2011 METHODS OF TEST FOR MASONRY UNITS - PART 1: DETERMINATION OF COMPRESSIVE STRENGTH
BS EN 14389-1:2015 Road traffic noise reducing devices. Procedures for assessing long term performance Acoustical characteristics
I.S. EN 14389-2:2015 ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS
I.S. EN 771-6:2011 SPECIFICATION FOR MASONRY UNITS - PART 6: NATURAL STONE MASONRY UNITS
I.S. EN 772-1:2011 METHODS OF TEST FOR MASONRY UNITS - PART 1: DETERMINATION OF COMPRESSIVE STRENGTH
I.S. EN 772-16:2011 METHODS OF TEST FOR MASONRY UNITS - PART 16: DETERMINATION OF DIMENSIONS
DIN EN 1996-1-1:2013-02 Eurocode 6: Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures (includes Amendment 1:2012)
I.S. EN 846-7:2012 METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 7: DETERMINATION OF SHEAR LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF SHEAR TIES AND SLIP TIES (COUPLET TEST FOR MORTAR JOINT CONNECTIONS)
DIN EN 772-1:2000-09 METHODS OF TEST FOR MASONRY UNITS - PART 1: DETERMINATION OF COMPRESSIVE STRENGTH
I.S. EN 772-11:2011 METHODS OF TEST FOR MASONRY UNITS - PART 11: DETERMINATION OF WATER ABSORPTION OF AGGREGATE CONCRETE, AUTOCLAVED AERATED CONCRETE, MANUFACTURED STONE AND NATURAL STONE MASONRY UNITS DUE TO CAPILLARY ACTION AND THE INITIAL RATE OF WATER ABSORPTION OF CLAY MASONRY UNITS
I.S. EN 846-5:2012 METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 5: DETERMINATION OF TENSILE AND COMPRESSIVE LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF WALL TIES (COUPLET TEST)
I.S. EN 846-6:2012 METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 6 - DETERMINATION OF TENSILE AND COMPRESSIVE LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF WALL TIES (SINGLE END TEST)
DIN EN 772-9:2005-05 METHODS OF TEST FOR MASONRY UNITS - PART 9: DETERMINATION OF VOLUME AND PERCENTAGE OF VOIDS AND NET VOLUME OF CLAY AND CALCIUM SILICATE MASONRY UNITS BY SAND FILLING
DIN EN 1015-9:2007-05 Methods of test for mortar for masonry - Part 9: Determination of workable life and correction time of fresh mortar (includes Amendment A1:2006)
I.S. EN 1996-1-1:2005 EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-1: GENERAL RULES FOR REINFORCED AND UNREINFORCED MASONRY STRUCTURES (INCLUDING IRISH NATIONAL ANNEX)
I.S. EN 14389-1:2015 ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS
BS EN 15287-2:2008 Chimneys. Design, installation and commissioning of chimneys Chimneys for roomsealed appliances
17/30351890 DC : 0 BS EN 772-22 - METHODS OF TEST FOR MASONRY UNITS - PART 22: DETERMINATION OF FREEZE/THAW RESISTANCE OF CLAY MASONRY UNITS
DIN V 105-100:2005-10 CLAY MASONRY UNITS - PART 100: CLAY MASONRY UNITS WITH SPECIFIC PROPERTIES
PREN 14389-1 : DRAFT 2013 ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS
BS EN 15254-2:2009 Extended application of results from fire resistance tests. Nonloadbearing walls Masonry and gypsum blocks
UNE-EN 1996-1-2:2011 Eurocode 6 - Design of masonry structures - Part 1-2: General rules - Structural fire design
13/30265750 DC : 0 BS EN 13914-1 - DESIGN, PREPARATION AND APPLICATION OF EXTERNAL RENDERING AND INTERNAL PLASTERING - PART 1: EXTERNAL RENDERING
99/109559 DC : DRAFT DEC 1999 BS EN 772-22 - METHODS OF TEST FOR MASONRY UNITS - DETERMINATION OF FREEZE/THAW RESISTANCE OF CLAY MASONRY UNITS
05/30136031 DC : 0 EN 15287-1 - CHIMNEYS - DESIGN, INSTALLATION AND COMMISSIONING OF CHIMNEYS - PART 1: CHIMNEYS FOR NON-ROOMSEALED HEATING APPLIANCES
DIN EN 15080-12:2011-04 Extended application of results from fire resistance tests - Part 12: Loadbearing masonry walls
I.S. EN 772-21:2011 METHODS OF TEST FOR MASONRY UNITS - PART 21: DETERMINATION OF WATER ABSORPTION OF CLAY AND CALCIUM SILICATE MASONRY UNITS BY COLD WATER ABSORPTION
I.S. EN 772-5:2016 METHODS OF TEST FOR MASONRY UNITS - PART 5: DETERMINATION OF THE ACTIVE SOLUBLE SALTS CONTENT OF CLAY MASONRY UNITS
UNI EN 15254-2 : 2009 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 2: MASONRY AND GYPSUM BLOCKS
PREN 772-11 : DRAFT 2010 METHODS OF TEST FOR MASONRY UNITS - PART 11: DETERMINATION OF WATER ABSORPTION OF AGGREGATE CONCRETE, AUTOCLAVED AERATED CONCRETE, MANUFACTURED STONE AND NATURAL STONE MASONRY UNITS DUE TO CAPILLARY ACTION AND THE INITIAL RATE OF WATER ABSORPTION OF CLAY MASONRY UNITS
DIN EN 1996-3:2010-12 Eurocode 6: Design of masonry structures - Part 3: Simplified calculation methods for unreinforced masonry structures (includes Corrigendum AC:2009)
BS EN 772-20:2000 Methods of test for masonry units Determination of flatness of faces of masonry units
UNE-EN 846-5:2013 Methods of test for ancillary components for masonry - Part 5: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couplet test)
UNE-EN 771-6:2012 Specification for masonry units - Part 6: Natural stone masonry units
EN 771-6:2011+A1:2015 Specification for masonry units - Part 6: Natural stone masonry units
EN 846-6:2012 Methods of test for ancillary components for masonry - Part 6: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (single end test)
UNI EN 846-7 : 2012 METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 7: DETERMINATION OF SHEAR LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF SHEAR TIES AND SLIP TIES (COUPLET TEST FOR MORTAR JOINT CONNECTIONS)
UNI EN 846-6 : 2012 METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 6: DETERMINATION OF TENSILE AND COMPRESSIVE LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF WALL TIES (SINGLE END TEST)
UNI EN 846-5 : 2012 METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 5: DETERMINATION OF TENSILE AND COMPRESSIVE LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF WALL TIES (COUPLET TEST)
UNI EN 1996-1-2 : 2005 EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
UNI EN 772-11 : 2011 METHODS OF TEST FOR MASONRY UNITS - PART 11: DETERMINATION OF WATER ABSORPTION OF AGGREGATE CONCRETE, AUTOCLAVED AERATED CONCRETE, MANUFACTURED STONE AND NATURAL STONE MASONRY UNITS DUE TO CAPILLARY ACTION AND THE INITIAL RATE OF WATER ABSORPTION OF CLAY MASONRY UNITS
UNI EN 1996-1-1 : 2013 EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-1: GENERAL RULES FOR REINFORCED AND UNREINFORCED MASONRY STRUCTURES
UNI EN 772-16 : 2011 METHODS OF TEST FOR MASONRY UNITS - PART 16: DETERMINATION OF DIMENSIONS
BS EN 772-21:2011 Methods of test for masonry units Determination of water absorption of clay and calcium silicate masonry units by cold water absorption
02/102266 DC : DRAFT MAR 2002 PREN 14389-2 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS
10/30215380 DC : 0 BS EN 772-11 - METHODS OF TEST FOR MASONRY UNITS - PART 11: DETERMINATION OF WATER ABSORPTION OF AGGREGATE CONCRETE, AUTOCLAVED AERATED CONCRETE, MANUFACTURED STONE AND NATURAL STONE MASONRY UNITS DUE TO CAPILLARY ACTION AND THE INITIAL RATE OF WATER ABSORPTION OF CLAY MASONRY UNITS
I.S. EN 1996-3:2006 EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 3: SIMPLIFIED CALCULATION METHODS FOR UNREINFORCED MASONRY STRUCTURES (INCLUDING IRISH NATIONAL ANNEX)
07/30172842 DC : 0 BS EN 15080-12 - EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - PART 12: LOADBEARING MASONRY WALLS
I.S. CEN TS 772-22:2006 METHODS OF TEST FOR MASONRY UNITS - PART 22: DETERMINATION OF FREEZE/THAW RESISTANCE OF CLAY MASONRY UNITS
BS EN 15080-12:2011 Extended application of results from fire resistance tests Loadbearing masonry walls
05/30134891 DC : 0 EN 15254-2 - EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 2: MASONRY AND GYPSUM BLOCKS
10/30215383 DC : 0 BS EN 772-16 - METHODS OF TEST FOR MASONRY UNITS - PART 16: DETERMINATION OF DIMENSIONS
PD CEN/TR 16886:2016 Guidance on the application of statistical methods for determining the properties of masonry products
13/30277107 DC : 0 BS EN 14389-2 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS
UNE-EN 14389-1:2015 Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics
S.R. CEN/TR 16886:2016 GUIDANCE ON THE APPLICATION OF STATISTICAL METHODS FOR DETERMINING THE PROPERTIES OF MASONRY PRODUCTS
I.S. EN 15287-2:2008 CHIMNEYS - DESIGN, INSTALLATION AND COMMISSIONING OF CHIMNEYS - PART 2: CHIMNEYS FOR ROOMSEALED APPLIANCES
PREN 772-22 : DRAFT 2017 METHODS OF TEST FOR MASONRY UNITS - PART 22: DETERMINATION OF FREEZE/THAW RESISTANCE OF CLAY MASONRY UNITS
PREN 16951-2 : DRAFT 2016 RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS
I.S. ENV 1996-1-2:1995 EUROCODE 6: DESIGN OF MASONRY STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
BS EN 772-2:1998 Methods of test for masonry units Determination of percentage area of voids in masonry units (by paper indentation)
BS EN 771-6 : 2011 SPECIFICATION FOR MASONRY UNITS - PART 6: NATURAL STONE MASONRY UNITS
BS EN 14389-2:2015 Road traffic noise reducing devices. Procedures for assessing long term performance Non-acoustical characteristics
UNE-EN 14389-2:2015 Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics
UNE-EN 846-6:2015 Methods of test for ancillary components for masonry - Part 6: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (single end test)
BS EN 772-9:1998 Methods of test for masonry units Determination of volume and percentage of voids and net volume of clay and calcium silicate masonry units by sand filling
BS EN 846-5:2012 Methods of test for ancillary components for masonry Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couplet test)
BS EN 1996-1-1 : 2005 EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-1: GENERAL RULES FOR REINFORCED AND UNREINFORCED MASONRY STRUCTURES
BS EN 846-6:2012 Methods of test for ancillary components for masonry Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (single end test)
BS EN 846-7:2012 Methods of test for ancillary components for masonry Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections)
UNE-EN 846-7:2015 Methods of test for ancillary components for masonry - Part 7: Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections)
BS EN 772-16:2011 Methods of test for masonry units Determination of dimensions
EN 772-1:2011+A1:2015 Methods of test for masonry units - Part 1: Determination of compressive strength
EN 772-16:2011 Methods of test for masonry units - Part 16: Determination of dimensions
EN 846-7:2012 Methods of test for ancillary components for masonry - Part 7: Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections)
EN 1996-1-1:2005+A1:2012 Eurocode 6 - Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures
EN 772-5:2016/AC:2017 METHODS OF TEST FOR MASONRY UNITS - PART 5: DETERMINATION OF THE ACTIVE SOLUBLE SALTS CONTENT OF CLAY MASONRY UNITS
EN 1996-3:2006/AC:2009 EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 3: SIMPLIFIED CALCULATION METHODS FOR UNREINFORCED MASONRY STRUCTURES
EN 15287-2:2008 Chimneys - Design, installation and commissioning of chimneys - Part 2: Chimneys for roomsealed appliances
EN 14389-2:2015 Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics
ENV 1996-1-2 : 1995 EUROCODE 6: DESIGN OF MASONRY STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
EN 772-21:2011 Methods of test for masonry units - Part 21: Determination of water absorption of clay and calcium silicate masonry units by cold water absorption
EN 772-9:1998/A1:2005 METHODS OF TEST FOR MASONRY UNITS - PART 9: DETERMINATION OF VOLUME AND PERCENTAGE OF VOIDS AND NET VOLUME OF CALCIUM SILICATE MASONRY UNITS BY SAND FILLING
EN 15254-2:2009 Extended application of results from fire resistance tests - Non-loadbearing walls - Part 2: Masonry and Gypsum Blocks
EN 14389-1:2015 Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics
EN 846-5:2012 Methods of test for ancillary components for masonry - Part 5: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couplet test)
EN 772-20:2000/A1:2005 METHODS OF TEST FOR MASONRY UNITS - PART 20: DETERMINATION OF FLATNESS OF FACES OF MOSONRY UNITS
EN 15037-3:2009+A1:2011 Precast concrete products - Beam-and-block floor systems - Part 3: Clay blocks
EN 772-11:2011 Methods of test for masonry units - Part 11: Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units
EN 15080-12:2011 Extended application of results from fire resistance tests - Part 12: Loadbearing masonry walls
EN 772-2:1998/A1:2005 METHODS OF TEST FOR MASONRY UNITS - PART 2: DETERMINATION OF PERCENTAGE AREA OF VOIDS IN AGGREGATE CONCRETE MASONRY UNITS (BY PAPER INDENTATION)
EN 846-8:2000/A1:2006 METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 8: DETERMINATION OF LOAD CAPACITY AND LOAD-DEFLECTION CHARACTERISTICS OF JOIST HANGERS
EN 1996-1-2:2005/AC:2010 EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
DD CEN/TS 772-22:2006 Methods of test for masonry units Determination of freeze/thaw resistance of clay masonry units
DIN EN 15254-2 E : 2009 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 2: MASONRY AND GYPSUM BLOCKS
UNE-EN 1996-1-1:2011 Eurocode 6 - Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures
16/30336501 DC : 0 BS EN 16951-2 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS
I.S. EN 15037-3:2009 PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 3: CLAY BLOCKS
UNE-EN 15254-2:2010 Extended application of results from fire resistance tests - Non-loadbearing walls - Part 2: Masonry and Gypsum Blocks
I.S. EN 15254-2:2009 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NONLOADBEARING WALLS - PART 2: MASONRY AND GYPSUM BLOCKS
DIN EN 772-1:2016-05 METHODS OF TEST FOR MASONRY UNITS - PART 1: DETERMINATION OF COMPRESSIVE STRENGTH
BS EN 772-11:2000 Methods of test for masonry units Determination of water absorption of aggregate concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units
BS EN 1996-3:2006 Eurocode 6. Design of masonry structures Simplified calculation methods for unreinforced masonry structures
BS EN 1996-1-2:2005 Eurocode 6. Design of masonry structures General rules. Structural fire design
DIN EN 846-7:2012-11 METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 7: DETERMINATION OF SHEAR LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF SHEAR TIES AND SLIP TIES (COUPLET TEST FOR MORTAR JOINT CONNECTIONS)
DIN EN 846-5:2012-11 METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 5: DETERMINATION OF TENSILE AND COMPRESSIVE LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF WALL TIES (COUPLET TEST)
DIN EN 846-6:2012-11 METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 6: DETERMINATION OF TENSILE AND COMPRESSIVE LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF WALL TIES (SINGLE END TEST)

BS EN 998-2:2016 Specification for mortar for masonry Masonry mortar
BS EN 772-7:1998 Methods of test for masonry units Determination of water absorption of clay masonry damp proof course units by boiling in water
EN 998-2:2016 Specification for mortar for masonry - Part 2: Masonry mortar
BS EN 772-11:2000 Methods of test for masonry units Determination of water absorption of aggregate concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units
EN 772-9:1998/A1:2005 METHODS OF TEST FOR MASONRY UNITS - PART 9: DETERMINATION OF VOLUME AND PERCENTAGE OF VOIDS AND NET VOLUME OF CALCIUM SILICATE MASONRY UNITS BY SAND FILLING
ISO 12491:1997 Statistical methods for quality control of building materials and components
BS EN 772-1 : 2011 METHODS OF TEST FOR MASONRY UNITS - PART 1: DETERMINATION OF COMPRESSIVE STRENGTH
BS EN 772-5:2016 Methods of test for masonry units Determination of the active soluble salts content of clay masonry units
EN 772-7:1998 Methods of test for masonry units - Part 7: Determination of water absorption of clay masonry damp proof course units by boiling in water
BS EN 752:2008 Drain and sewer systems outside buildings
EN 772-1:2011+A1:2015 Methods of test for masonry units - Part 1: Determination of compressive strength
BS EN 772-13:2000 Methods of test for masonry units Determination of net and gross dry density of masonry units (except for natural stone)
EN 772-19:2000 Methods of test for masonry units - Part 19: Determination of moisture expansion of large horizontally perforated clay masonry units
BS PAS 70(2003) : 2003 HD CLAY BRICKS - GUIDE TO APPEARANCE AND SITE MEASURED DIMENSIONS AND TOLERANCE
EN 1745:2012 Masonry and masonry products - Methods for determining thermal properties
EN 772-21:2011 Methods of test for masonry units - Part 21: Determination of water absorption of clay and calcium silicate masonry units by cold water absorption
ISO 12572:2016 Hygrothermal performance of building materials and products Determination of water vapour transmission properties Cup method
EN 772-5:2016/AC:2017 METHODS OF TEST FOR MASONRY UNITS - PART 5: DETERMINATION OF THE ACTIVE SOLUBLE SALTS CONTENT OF CLAY MASONRY UNITS
EN 772-16:2011 Methods of test for masonry units - Part 16: Determination of dimensions
EN ISO 12572:2016 Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method (ISO 12572:2016)
EN 1996-1-1:2005+A1:2012 Eurocode 6 - Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures
EN 772-20:2000/A1:2005 METHODS OF TEST FOR MASONRY UNITS - PART 20: DETERMINATION OF FLATNESS OF FACES OF MOSONRY UNITS
EN 772-3:1998 Methods of test for masonry units - Part 3: Determination of net volume and percentage of voids of clay masonry units by hydrostatic weighing
EN 1996-3:2006/AC:2009 EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 3: SIMPLIFIED CALCULATION METHODS FOR UNREINFORCED MASONRY STRUCTURES
BS 6100-1:2004 Building and civil engineering. Vocabulary General terms
EN 1996-1-2:2005/AC:2010 EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
PD 6697:2010 Recommendations for the design of masonry structures to BS EN 1996-1-1 and BS EN 1996-2
EN 1052-3:2002/A1:2007 METHODS OF TEST FOR MASONRY - PART 3: DETERMINATION OF INITIAL SHEAR STRENGTH
EN 1996-2:2006/AC:2009 EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 2: DESIGN CONSIDERATIONS, SELECTION OF MATERIALS AND EXECUTION OF MASONRY
EN 772-11:2011 Methods of test for masonry units - Part 11: Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units
EN 772-13:2000 Methods of test for masonry units - Part 13: Determination of net and gross dry density of masonry units (except for natural stone)
BS 6649:1985 Specification for clay and calcium silicate modular bricks

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.