EN ISO 13934-2:2014
Current
Current
The latest, up-to-date edition.
Textiles - Tensile properties of fabrics - Part 2: Determination of maximum force using the grab method (ISO 13934-2:2014)
Published date
05-02-2014
Publisher
Foreword
Introduction
1 Scope
2 Normative References
3 Terms and definitions
4 Principle
5 Sampling
6 Apparatus
7 Atmosphere for conditioning and testing
8 Preparation of test specimens
9 Procedure
10 Calculation and expression of results
11 Test report
Annex A (informative) - Suggested procedure for
sampling
Annex B (informative) - Locations of test specimens
cut from a laboratory sample
Annex C (informative) - Arrangements of jaws for
the grab test
Bibliography
ISO 13934-2:2014 specifies a procedure for the determination of the maximum force of textile fabrics known as the grab test. The method is mainly applicable to woven textile fabrics including fabrics which exhibit stretch characteristics imparted by the presence of an elastomeric fibre and mechanical or chemical treatment. It can be applicable to fabrics produced by other techniques. It is not normally applicable to geotextiles, nonwovens, coated fabrics, textile-glass woven fabrics, and fabrics made from carbon fibres or polyolefin tape yarns. The method specifies the determination of the maximum force of test specimens in equilibrium with the standard atmosphere for testing and of test specimens in the wet state. The method is restricted to the use of constant-rate-of-extension (CRE) testing machines.
| Committee |
CEN/TC 248
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| DIN EN ISO 13934-2:1999-04 | Identical |
| ISO 13934-2:2014 | Identical |
| UNE-EN ISO 13934-2:2014 | Identical |
| BS EN ISO 13934-2:2014 | Identical |
| NEN EN ISO 13934-2 : 2014 | Identical |
| NF EN ISO 13934-2 : 2014 | Identical |
| I.S. EN ISO 13934-2:2014 | Identical |
| DIN EN ISO 13934-2:2014-06 | Identical |
| PN EN ISO 13934-2 : 2014 | Identical |
| NS EN ISO 13934-2 : 2014 | Identical |
| NBN EN ISO 13934-2 : 2014 | Identical |
| SS-EN ISO 13934-2 : 2014 | Identical |
| UNI EN ISO 13934-2 : 2014 | Identical |
| SN EN ISO 13934-2 : 2014 | Identical |
| PREN 14225-2 : DRAFT 2014 | DIVING SUITS - PART 2: DRY SUITS - REQUIREMENTS AND TEST METHODS |
| EN 14225-2:2017 | Diving suits - Part 2: Dry suits - Requirements and test methods |
| BS EN 14225-2:2017 | Diving suits Dry suits. Requirements and test methods |
| PREN 14594 : DRAFT 2016 | RESPIRATORY PROTECTIVE DEVICES - CONTINUOUS FLOW COMPRESSED AIR LINE BREATHING DEVICES - REQUIREMENTS, TESTING AND MARKING |
| EN 1146:2005 | Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape - Requirements, testing, marking |
| DIN EN 1146:2005-12 | Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape - Requirements, testing, marking |
| ISO 14877:2002 | Protective clothing for abrasive blasting operations using granular abrasives |
| I.S. EN 1486:2007 | PROTECTIVE CLOTHING FOR FIRE-FIGHTERS - TEST METHODS AND REQUIREMENTS FOR REFLECTIVE CLOTHING FOR SPECIALISED FIRE-FIGHTING |
| I.S. EN 1146:2005 | RESPIRATORY PROTECTIVE DEVICES - SELF-CONTAINED OPEN-CIRCUIT COMPRESSED AIR BREATHING APPARATUS INCORPORATING A HOOD FOR ESCAPE - REQUIREMENTS, TESTING, MARKING |
| 17/30348244 DC : 0 | BS EN 14594 - RESPIRATORY PROTECTIVE DEVICES - CONTINUOUS FLOW COMPRESSED AIR LINE BREATHING DEVICES - REQUIREMENTS, TESTING AND MARKING |
| BS EN 14594:2005 | Respiratory protective devices. Continuous flow compressed air line breathing apparatus. Requirements, testing, marking |
| ONORM EN 14594 : 2005 | RESPIRATORY PROTECTIVE DEVICES - CONTINUOUS FLOW COMPRESSED AIR LINE BREATHING APPARATUS - REQUIREMENTS, TESTING, MARKING |
| 14/30293497 DC : 0 | BS EN 14225-2 - DIVING SUITS - PART 2: DRY SUITS - REQUIREMENTS AND TEST METHODS |
| DIN EN 1486:2008-04 | Protective clothing for fire-fighters - Test methods and requirements for reflective clothing for specialised fire-fighting |
| BS EN ISO 13937-4:2000 | Textiles. Tear properties of fabrics Determination of tear force of tongue-shaped test specimens (double tear test) |
| UNI EN 1486 : 2008 | PROTECTIVE CLOTHING FOR FIRE-FIGHTERS - TEST METHODS AND REQUIREMENTS FOR REFLECTIVE CLOTHING FOR SPECIALISED FIRE-FIGHTING |
| I.S. EN ISO 13937-1:2000 | TEXTILES - TEAR PROPERTIES OF FABRICS - PART 1: DETERMINATION OF TEAR USING BALLISTIC PENDULUM METHOD (ELMENDORF) |
| DIN EN 14594:2005-07 | RESPIRATORY PROTECTIVE DEVICES - CONTINUOUS FLOW COMPRESSED AIR LINE BREATHING APPARATUS - REQUIREMENTS, TESTING, MARKING |
| I.S. EN 14594:2005 | RESPIRATORY PROTECTIVE DEVICES - CONTINUOUS FLOW COMPRESSED AIR LINE BREATHING DEVICES - REQUIREMENTS, TESTING AND MARKING |
| EN 14594:2018 | Respiratory protective devices - Continuous flow compressed air line breathing devices - Requirements, testing and marking |
| I.S. EN 14225-2:2017 | DIVING SUITS - PART 2: DRY SUITS - REQUIREMENTS AND TEST METHODS |
| BS EN 381-10:2002 | Protective clothing for users of hand-held chain saws Test method for upper body protectors |
| BS EN 1146:2005 | Respiratory protective devices. Selfcontained open-circuit compressed air breathing apparatus incorporating a hood for escape. Requirements, testing, marking |
| BS EN ISO 13937-2:2000 | Textiles. Tear properties of fabrics Determination of tear force of trouser-shaped test specimens (single tear method) |
| ISO 13937-3:2000 | Textiles — Tear properties of fabrics — Part 3: Determination of tear force of wing-shaped test specimens (Single tear method) |
| ISO 13937-1:2000 | Textiles — Tear properties of fabrics — Part 1: Determination of tear force using ballistic pendulum method (Elmendorf) |
| ISO 13937-4:2000 | Textiles — Tear properties of fabrics — Part 4: Determination of tear force of tongue-shaped test specimens (Double tear test) |
| I.S. EN 381-10:2002 | PROTECTIVE CLOTHING FOR USERS OF HAND-HELD CHAINSAWS - TEST METHODS FOR UPPER BODY PROTECTORS |
| BS EN 1073-2:2002 | Protective clothing against radioactive contamination Requirements and test methods for non-ventilated protective clothing against particulate radioactive contamination |
| BS EN ISO 13937-3:2000 | Textiles. Tear properties of fabrics Determination of tear force of wing-shaped test specimens (single tear method) |
| EN ISO 13937-4 : 2000 | TEXTILES - TEAR PROPERTIES OF FABRICS - PART 4: DETERMINATION OF TEAR FORCE OF TONGUE-SHAPED TEST SPECIMENS (DOUBLE TEAR TEST) (ISO 13937-4:2000) |
| EN ISO 13937-1:2000/AC:2006 | Textiles - Tear properties of fabrics - Part 1: Determination of tear force using ballistic pendulum method (Elmendorf) (ISO 13937-1:2000/Cor.1:2004) |
| EN ISO 14877:2002 | Protective clothing for abrasive blasting operations using granular abrasives (ISO 14877:2002) |
| EN ISO 13937-2 : 2000 | TEXTILES - TEAR PROPERTIES OF FABRICS - PART 2: DETERMINATION OF TEAR FORCE OF TROUSER-SHAPED TEST SPECIMENS (SINGLE TEAR METHOD) (ISO 13937-2:2000) |
| EN 1486:2007 | Protective clothing for fire-fighters - Test methods and requirements for reflective clothing for specialised fire-fighting |
| EN 381-10:2002 | Protective clothing for users of hand-held chainsaws - Part 10: Test method for upper body protectors |
| EN ISO 13937-3 : 2000 | TEXTILES - TEAR PROPERTIES OF FABRICS - PART 3: DETERMINATION OF TEAR FORCE OF WING-SHAPED TEST SPECIMENS (SINGLE TEAR METHOD) (ISO 13937-3:2000) |
| 02/561344 DC : DRAFT MAR 2002 | BS EN 1146 - RESPIRATORY PROTECTIVE DEVICES - SELF-CONTAINED OPEN-CIRCUIT COMPRESSED AIR BREATHING APPARATUS INCORPORATION A HOOD FOR ESCAPE (COMPRESSED AIR ESCAPE APPARATUS WITH HOOD) - REQUIREMENTS, TESTING, MARKING |
| DIN EN 14594 E : 2005 | RESPIRATORY PROTECTIVE DEVICES - CONTINUOUS FLOW COMPRESSED AIR LINE BREATHING APPARATUS - REQUIREMENTS, TESTING, MARKING |
| BS EN ISO 14877:2002 | Protective clothing for abrasive blasting operations using granular abrasives |
| BS EN 1486:2007 | Protective clothing for fire-fighters. Test methods and requirements for reflective clothing for specialized fire-fighting |
| EN 1073-2:2002 | Protective clothing against radioactive contamination - Part 2: Requirements and test methods for non-ventilated protective clothing against particulate radioactive contamination |
| ISO 13934-1:2013 | Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method |
| ISO 9073-3:1989 | Textiles — Test methods for nonwovens — Part 3: Determination of tensile strength and elongation |
| ISO 13935-2:2014 | Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 2: Determination of maximum force to seam rupture using the grab method |
| ISO 4606:1995 | Textile glass Woven fabric Determination of tensile breaking force and elongation at break by the strip method |
| ISO 3696:1987 | Water for analytical laboratory use — Specification and test methods |
| ISO 139:2005 | Textiles Standard atmospheres for conditioning and testing |
| ISO 1421:2016 | Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break |
| ISO 7500-1:2015 | Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system |
| ISO 10012-1:1992 | Quality assurance requirements for measuring equipment Part 1: Metrological confirmation system for measuring equipment |
| ISO 13935-1:2014 | Textiles Seam tensile properties of fabrics and made-up textile articles Part 1: Determination of maximum force to seam rupture using the strip method |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.