EN ISO 17132:2007
Current
The latest, up-to-date edition.
Paints and varnishes - T-bend test (ISO 17132:2007)
01-10-2007
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Apparatus
6 Sampling
7 Test panels
7.1 Substrate
7.2 Preparation and coating
7.3 Thickness of the coating
8 Procedure
8.1 Conditioning of the test panels
8.2 Test conditions
8.3 Bending
8.4 Evaluation
8.5 T-bend test as a pass/fail test
9 Supplementary information
10 Expression of results
11 Precision
11.1 General
11.2 Repeatability, r
11.3 Reproducibility, R
12 Test report
Annex A (informative) Correlation between the ISO rating system
and other systems
Bibliography
ISO 17132:2007 describes a method of evaluating the flexibility and adhesion of an organic coating on a metallic substrate by observing the cracking or loss of adhesion when a coated test panel is bent.The method can be used to confirm whether paints, varnishes or related products meet a given test requirement in a pass/fail test, or to determine the minimum bending diameter at which cracking does not occur.
| Committee |
CEN/TC 139
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| BS EN ISO 17132:2007 | Identical |
| NBN EN ISO 17132 : 2007 | Identical |
| ISO 17132:2007 | Identical |
| NEN EN ISO 17132 : 2007 | Identical |
| NS EN ISO 17132 : 1ED 2007 | Identical |
| NF EN ISO 17132 : 2007 | Identical |
| I.S. EN ISO 17132:2007 | Identical |
| DIN EN ISO 17132:2008-01 | Identical |
| PN EN ISO 17132 : 2009 | Identical |
| UNE-EN ISO 17132:2008 | Identical |
| I.S. EN 13523-7:2014 | COIL COATED METALS - TEST METHODS - PART 7: RESISTANCE TO CRACKING ON BENDING (T-BEND TEST) |
| DIN EN 13523-7:2014-08 | Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test) |
| BS EN 13523-7:2014 | Coil coated metals. Test methods Resistance to cracking on bending (T-bend test) |
| EN 13523-7:2014 | Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test) |
| ISO 1514:2016 | Paints and varnishes — Standard panels for testing |
| IEC 60454-2:2007 | Pressure-sensitive adhesive tapes for electrical purposes - Part 2: Methods of test |
| ISO 6272-2:2011 | Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 2: Falling-weight test, small-area indenter |
| ISO 2808:2007 | Paints and varnishes — Determination of film thickness |
| ISO 1520:2006 | Paints and varnishes — Cupping test |
| ISO 15528:2013 | Paints, varnishes and raw materials for paints and varnishes — Sampling |
| ISO 6272-1:2011 | Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 1: Falling-weight test, large-area indenter |
| ISO 1513:2010 | Paints and varnishes — Examination and preparation of test samples |
| EN 13523-7:2014 | Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test) |
| ISO 1519:2011 | Paints and varnishes — Bend test (cylindrical mandrel) |
| ISO 6860:2006 | Paints and varnishes — Bend test (conical mandrel) |