• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN ISO 354:2003

Current
Current

The latest, up-to-date edition.

Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003)
Published date

15-05-2003

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Frequency range
6 Test arrangement
  6.1 Reverberation room and diffusion of sound field
  6.2 Test specimens
  6.3 Temperature and relative humidity
7 Measurement of reverberation time
  7.1 General
  7.2 Interrupted noise method
  7.3 Integrated impulse response method
  7.4 Evaluation of reverberation times based on decay
      curves
8 Expression of results
  8.1 Method of calculation
  8.2 Precision
  8.3 Presentation of results
9 Test report
Annex A (normative) - Diffusivity of the sound field in the
                       reverberation room
Annex B (normative) - Test specimen mountings for sound
                       absorption tests
Bibliography
Annex ZA (normative) - Normative references to international
                       publications with their relevant European
                       publications

ISO 354:2003 specifies a method of measuring the sound absorption coefficient of acoustical materials used as wall or ceiling treatments, or the equivalent sound absorption area of objects, such as furniture, persons or space absorbers, in a reverberation room. It is not intended to be used for measuring the absorption characteristics of weakly damped resonators.The results obtained can be used for comparison purposes and for design calculation with respect to room acoustics and noise control.

Committee
CEN/TC 126
DevelopmentNote
Supersedes EN 20354. (06/2007)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current
Supersedes

15/30315069 DC : DRAFT MAY 2015 BS EN 14313 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE POLYETHYLENE FOAM (PEF) PRODUCTS - SPECIFICATION
BS EN 14509:2013 Self-supporting double skin metal faced insulating panels. Factory made products. Specifications
PREN 12733 : DRAFT 2016 AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY
15/30328765 DC : 0 BS EN 12602 - PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE
BS EN 61481-1:2014 Live working. Phase comparators Capacitive type to be used for voltages exceeding 1 kV a.c.
I.S. EN 13297:2007 TEXTILE FLOOR COVERINGS - CLASSIFICATION OF NEEDLED PILE FLOOR COVERINGS
PREN 14313 : DRAFT 2015 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE POLYETHYLENE FOAM (PEF) PRODUCTS - SPECIFICATION
15/30321297 DC : 0 BS EN 1793-1 - ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 1: INTRINSIC CHARACTERISTICS OF SOUND ABSORPTION UNDER DIFFUSE SOUND FIELD CONDITIONS
PREN 13279-1 : DRAFT 2017 GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS
DIN EN 1793-4:2015-05 ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 4: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND DIFFRACTION
08/30171552 DC : DRAFT JAN 2008 BS EN 13279-1 - GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS
DIN EN 14509:2013-12 SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
08/30169559 DC : DRAFT APR 2008 BS EN 13171 - THERMAL INSULATING PRODUCTS FOR BUILDINGS - FACTORY MADE WOOD FIBRE (WF) PRODUCTS - SPECIFICATION
PD CEN/TR 15226:2006 Building products. Treatment of acoustics in product technical specifications
08/30169531 DC : DRAFT APR 2008 BS EN 13162 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION
I.S. EN 16487:2014 ACOUSTICS - TEST CODE FOR SUSPENDED CEILINGS - SOUND ABSORPTION
02/120714 DC : 0 PREN 14318-1 - THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED DISPENSED RIGID POLYURETHANE FOAM (PUR) PRODUCTS - PART 1: SPECIFICATION FOR THE RIGID POLYURETHANE DISPENSE SYSTEM BEFORE INSTALLATION
05/30135872 DC : 0 EN 15283-2 - GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 2: GYPSUM FIBRE BOARDS
I.S. EN 16272-4:2016 RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 4: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND DIFFRACTION UNDER DIRECT SOUND FIELD
I.S. EN 50636-2-100:2014 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-100: PARTICULAR REQUIREMENTS FOR HAND-HELD MAINS-OPERATED GARDEN BLOWERS, VACUUMS AND BLOWER VACUUMS
DD CEN/TS 15398:2006 Resilient, textile and laminate floor coverings. Floor covering standard symbols
05/30136556 DC : 0 PREN 14313 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATION - FACTORY MADE POLYETHYLENE FOAM (PEF) PRODUCTS - SPECIFICATION
DIN EN 14313 E : 2016 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE POLYETHYLENE FOAM (PEF) PRODUCTS - SPECIFICATION
DIN EN 14303:2016-08 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION
DIN EN 16069:2015-04 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF POLYETHYLENE FOAM (PEF) - SPECIFICATION
PREN 13169 : DRAFT 2010 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE EXPANDED PERLITE BOARD (EPB) PRODUCTS - SPECIFICATION
DIN EN 14304:2016-03 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE FLEXIBLE ELASTOMERIC FOAM (FEF) PRODUCTS - SPECIFICATION
I.S. EN 15101-1:2013 THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE FILL CELLULOSE (LFCI) PRODUCTS - PART 1: SPECIFICATION FOR THE PRODUCTS BEFORE INSTALLATION
S.R. CEN/TS 15398:2016 RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - FLOOR COVERING STANDARD SYMBOLS - COMPLEMENTARY ELEMENT
I.S. EN 16069:2012 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF POLYETHYLENE FOAM (PEF) - SPECIFICATION
PREN 12602 : DRAFT 2015 PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE
EN 15102:2007+A1:2011 Decorative wall coverings - Roll and panel form
12/30268937 DC : 0 BS EN 16491 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE COMPOSITE PRODUCTS - SPECIFICATION
14/30303797 DC : 0 BS EN 438-7 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 7: COMPACT LAMINATE AND HPL COMPOSITE PANELS FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES
UNI EN 15101-1 : 2013 THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE FILL CELLULOSE (LFCI) PRODUCTS - PART 1: SPECIFICATION FOR THE PRODUCTS BEFORE INSTALLATION
UNE-EN 14318-1:2013 Thermal insulating products for buildings - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 1: Specification for the rigid foam dispensed system before installation
I.S. CEN/TR 15226:2006 BUILDING PRODUCTS - TREATMENT OF ACOUSTICS IN PRODUCT TECHNICAL SPECIFICATIONS
EN 15101-1:2013 Thermal insulation products for buildings - In-situ formed loose fill cellulose (LFCI) products - Part 1: Specification for the products before installation
UNE-EN 1307:2014 Textile floor coverings - Classification
I.S. EN 14915:2013 SOLID WOOD PANELLING AND CLADDING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
CEN/TS 15398:2016 Resilient, textile and laminate floor coverings - Floor covering standard symbols - Complementary element
EN 14915:2013+A1:2017 Solid wood panelling and cladding - Characteristics, requirements and marking
DIN EN 14910 E : 2009 GARDEN EQUIPMENT - WALK-BEHIND COMBUSTION ENGINE POWERED TRIMMERS - SAFETY
DIN EN 13169:2015-04 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE EXPANDED PERLITE BOARD (EPB) PRODUCTS - SPECIFICATION
DIN EN 12354-6:2004-04 Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 6: Sound absorption in enclosed spaces
DIN EN 13683:2013-08 Garden equipment - Integrally powered shredders/chippers - Safety
DIN EN 14366 E : 2005 LABORATORY MEASUREMENT OF NOISE FROM WASTE WATER INSTALLATIONS
BS EN ISO 140-6:1998 Acoustics. Measurement of sound insulation in buildings and of building elements Laboratory measurements of impact sound insulation of floors
BS EN 786 : 1996 GARDEN EQUIPMENT - ELECTRICALLY POWERED WALK-BEHIND AND HAND-HELD LAWN TRIMMERS AND LAWN EDGE TRIMMERS - MECHANICAL SAFETY
BS EN 14190:2014 Gypsum board products from reprocessing. Definitions, requirements and test methods
BS EN 438-7:2005 High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates) Compact laminate and HPL composite panels for internal and external wall and ceiling finishes
BS EN 12354-6:2003 Building acoustics. Estimation of acoustic performance of buildings from the performance of elements Sound absorption in enclosed spaces
BS EN 520 : 2004 GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
BS EN 13168 : 2012 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE WOOD WOOL (WW) PRODUCTS - SPECIFICATION
I.S. EN 13168:2012 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE WOOD WOOL (WW) PRODUCTS - SPECIFICATION
I.S. EN 13165:2012 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE RIGID POLYURETHANE FOAM (PU) PRODUCTS - SPECIFICATION
UNI EN 1218-5 : 2010 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FEED CHAIN
I.S. EN 14910:2007 GARDEN EQUIPMENT - WALK-BEHIND COMBUSTION ENGINE POWERED TRIMMERS - SAFETY
DIN EN 13815:2006-12 Fibrous gypsum plaster casts - Definitions, requirements and test methods
EN 61243-3:2014/AC:2015 LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE
DIN EN 13813:2003-01 SCREED MATERIAL AND FLOOR SCREEDS - SCREED MATERIALS - PROPERTIES AND REQUIREMENTS
EN 12354-6:2003 Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 6: Sound absorption in enclosed spaces
DIN EN 1090-5:2017-07 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
EN 12602:2016 Prefabricated reinforced components of autoclaved aerated concrete
CEN/TR 15226:2006 Building products - Treatment of acoustics in product technical specifications
EN 50636-2-94:2014 Household and similar electrical appliances - Safety - Part 2-94: Particular requirements for scissors type grass shears
EN 61481-1:2014 Live working - Phase comparators - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.
DIN EN 13915:2017-09 PREFABRICATED GYPSUM PLASTERBOARD PANELS WITH A CELLULAR PAPERBOARD CORE - DEFINITIONS, REQUIREMENTS AND TEST METHODS
EN 13162:2012+A1:2015 Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification
EN 50636-2-100:2014 Household and similar electrical appliances - Safety - Part 2-100: Particular requirements for hand-held mains-operated garden blowers, vacuums and blower vacuums
EN 1218-4:2004+A2:2009 Safety of woodworking machines - Tenoning machines - Part 4: Edge banding machines fed by chain(s)
PREN 1307 : DRAFT 2012 TEXTILE FLOOR COVERINGS - CLASSIFICATION
DIN EN 16487:2015-02 ACOUSTICS - TEST CODE FOR SUSPENDED CEILINGS - SOUND ABSORPTION
14/30298593 DC : 0 BS EN 1793-4 - ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 4: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND DIFFRACTION
16/30330679 DC : DRAFT MAR 2016 BS EN 16977 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE CALCIUM SILICATE (CS) PRODUCTS - SPECIFICATION
PREN 14915 : DRAFT 2013 SOLID WOOD PANELLING AND CLADDING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
08/30169546 DC : DRAFT APR 2008 BS EN 13167 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE CELLULAR GLASS (CG) PRODUCTS - SPECIFICATION
UNE-EN 16272-4:2017 Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In situ values of sound diffraction under direct sound field
BS EN 15283-1 : 2008 GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 1: GYPSUM BOARDS WITH MAT REINFORCEMENT
13/30266550 DC : 0 BS EN 14509 - SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
UNE-EN 13684:2005 Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety
I.S. EN 1470:2008 TEXTILE FLOOR COVERINGS - CLASSIFICATION OF NEEDLED FLOOR COVERINGS EXCEPT FOR NEEDLED PILE FLOOR COVERINGS
BS EN 60335-2-77:2010 Safety of household and similar appliances Particular requirements for pedestrian-controlled walk-behind electrically powered lawn mowers
UNE-EN 61481-1:2015 Live working - Phase comparators - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.
EN 1218-5:2004+A1:2009 Safety of woodworking machines - Tenoning machines - Part 5: One side profiling machines with fixed table and feed rollers or feed chain
BS EN 16487:2014 Acoustics. Test code for suspended ceilings. Sound absorption
DIN EN 15283-2:2009-12 Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 2: Gypsum fibre boards (includes Amendment A1:2009)
PD CEN/TS 15398:2016 Resilient, textile and laminate floor coverings. Floor covering standard symbols. Complementary element
10/30213980 DC : 0 BS EN 13169 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE EXPANDED PERLITE BOARD (EPB) PRODUCTS - SPECIFICATION
UNI EN 15283-1 : 2009 GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 1: GYPSUM BOARDS WITH MAT REINFORCEMENT
DIN EN 12602:2015-12 (Draft) PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE
10/30213986 DC : 0 BS EN 13171 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE WOOD FIBRE (WF) PRODUCTS - SPECIFICATION
PREN 13165 : DRAFT 2010 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE RIGID POLYURETHANE FOAM (PU) PRODUCTS - SPECIFICATION
12/30256888 DC : 0 BS EN 1307 - TEXTILE FLOOR COVERINGS - CLASSIFICATION
BS EN 14303 : 2009 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION
01/715188 DC : DRAFT NOV 2001 PREN 774 - GARDEN EQUIPMENT - HAND HELD, INTEGRALLY POWERED HEDGE TRIMMERS - SAFETY
08/30169552 DC : DRAFT APR 2008 BS EN 13169 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF EXPANDED PERLITE (EPB) - SPECIFICATION
I.S. EN 14305:2015 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE CELLULAR GLASS (CG) PRODUCTS - SPECIFICATION
PREN 14304 : DRAFT 2015 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE FLEXIBLE ELASTOMERIC FOAM (FEF) PRODUCTS - SPECIFICATION
PREN 14374 : DRAFT 2016 TIMBER STRUCTURES - LAMINATED VENEER LUMBER (LVL) - REQUIREMENTS
DIN EN 14313:2016-03 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE POLYETHYLENE FOAM (PEF) PRODUCTS - SPECIFICATION
BS EN 61243-3:2014 Live working. Voltage detectors Two-pole low-voltage type
I.S. EN 14315-1:2013 THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED SPRAYED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) FOAM PRODUCTS - PART 1: SPECIFICATION FOR THE RIGID FOAM SPRAY SYSTEM BEFORE INSTALLATION
PREN 14305 : DRAFT 2015 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE CELLULAR GLASS (CG) PRODUCTS - SPECIFICATION
I.S. EN 14304:2015 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE FLEXIBLE ELASTOMERIC FOAM (FEF) PRODUCTS - SPECIFICATION
I.S. EN 1793-4:2015 ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 4: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND DIFFRACTION
BS EN 14304 : 2009 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE FLEXIBLE ELASTOMERIC FOAM (FEF) PRODUCTS - SPECIFICATION
I.S. EN 50636-2-91:2014 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-91: PARTICULAR REQUIREMENTS FOR WALK-BEHIND AND HAND-HELD LAWN TRIMMERS AND LAWN EDGE TRIMMERS
I.S. EN 50636-2-92:2014 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-92: PARTICULAR REQUIREMENTS FOR PEDESTRIAN-CONTROLLED MAINS-OPERATED LAWN SCARIFIERS AND AERATORS
I.S. EN 14303:2015 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION
DIN EN 15101-1:2013-12 THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE FILL CELLULOSE (LFCI) PRODUCTS - PART 1: SPECIFICATION FOR THE PRODUCTS BEFORE INSTALLATION
DIN EN 15102 E : 2011 DECORATIVE WALL COVERINGS - ROLL AND PANEL FORM
DIN EN 13279-1:2008-11 GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS
DIN EN 13170:2015-04 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF EXPANDED CORK (ICB) - SPECIFICATION
DIN EN 13165:2016-09 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE RIGID POLYURETHANE FOAM (PU) PRODUCTS - SPECIFICATION
DIN EN 13168:2015-04 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE WOOD WOOL (WW) PRODUCTS - SPECIFICATION
DIN EN 1520:2011-06 Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement
DIN EN 13162:2015-04 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION
DIN EN 1793-1:2015-06 (Draft) ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 1: INTRINSIC CHARACTERISTICS OF SOUND ABSORPTION UNDER DIFFUSE SOUND FIELD CONDITIONS
DIN EN 14366:2005-02 LABORATORY MEASUREMENT OF NOISE FROM WASTE WATER INSTALLATIONS
DIN EN 13986:2015-06 WOOD-BASED PANELS FOR USE IN CONSTRUCTION - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
DIN EN 14246:2006-09 Gypsum elements for suspended ceilings - Definitions, requirements and test methods
DIN EN 14910:2009-08 GARDEN EQUIPMENT - WALK-BEHIND COMBUSTION ENGINE POWERED TRIMMERS - SAFETY
BS EN 774:1996 Garden equipment. Hand held, integrally powered hedge trimmers. Safety
BS EN 13169 : 2012 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE EXPANDED PERLITE BOARD (EPB) PRODUCTS - SPECIFICATION
BS EN 836 : 1997 GARDEN EQUIPMENT - POWERED LAWNMOWERS - SAFETY
DIN EN 1218-4:2009-12 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 4: EDGE BANDING MACHINES FED BY CHAIN(S)
DIN EN 1470:1998-01 TEXTILE FLOOR COVERINGS - CLASSIFICATION OF NEEDLED FLOOR COVERINGS EXCEPT FOR NEEDLED PILE FLOOR COVERINGS
I.S. EN 1218-2:2004 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 2: DOUBLE END TENONING AND/OR PROFILING MACHINES FED BY CHAIN OR CHAINS
I.S. EN 786:1996 GARDEN EQUIPMENT - ELECTRICALLY POWERED WALK-BEHIND AND HAND-HELD LAWN TRIMMERS AND LAWN EDGE TRIMMERS - MECHANICAL SAFETY
I.S. EN 1520:2011 PREFABRICATED REINFORCED COMPONENTS OF LIGHTWEIGHT AGGREGATE CONCRETE WITH OPEN STRUCTURE WITH STRUCTURAL OR NON-STRUCTURAL REINFORCEMENT
I.S. EN 12750:2013 SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
I.S. EN 13915:2017 PREFABRICATED GYPSUM PLASTERBOARD PANELS WITH A CELLULAR PAPERBOARD CORE - DEFINITIONS, REQUIREMENTS AND TEST METHODS
I.S. EN 13167:2012 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE CELLULAR GLASS (CG) PRODUCTS - SPECIFICATION
I.S. EN 13683:2003 GARDEN EQUIPMENT - INTEGRALLY POWERED SHREDDERS/CHIPPERS - SAFETY
DIN EN 13297:2000-11 TEXTILE FLOOR COVERINGS - CLASSIFICATION OF NEEDLED PILE FLOOR COVERINGS
DIN EN 12602:2016-12 Prefabricated reinforced components of autoclaved aerated concrete
I.S. EN 13171:2012 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE WOOD FIBRE (WF) PRODUCTS - SPECIFICATION
I.S. EN 13170:2012 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF EXPANDED CORK (ICB) - SPECIFICATION
I.S. EN 1218-5:2004 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FEED CHAIN
I.S. EN 13986:2004 WOOD-BASED PANELS FOR USE IN CONSTRUCTION - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
I.S. EN 520:2005 GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
I.S. EN 13169:2012 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE EXPANDED PERLITE BOARD (EPB) PRODUCTS - SPECIFICATION
I.S. EN 13162:2012 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION
I.S. EN 13950:2014 GYPSUM BOARD THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
I.S. EN 1793-1:2017 ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 1: INTRINSIC CHARACTERISTICS OF SOUND ABSORPTION UNDER DIFFUSE SOUND FIELD CONDITIONS
I.S. EN 13964:2014 SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
I.S. EN 14190:2014 GYPSUM BOARD PRODUCTS FROM REPROCESSING - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNI EN 1470 : 2008 TEXTILE FLOOR COVERINGS - CLASSIFICATION OF NEEDLED FLOOR COVERINGS EXCEPT FOR NEEDLED PILE FLOOR COVERINGS
VDI 3762:2012-01 Sound insulation by means of raised access floors and hollow floors
VDI 3755:2015-01 Sound insulation and sound absorption of suspended ceilings
15/30315075 DC : DRAFT MAY 2015 BS EN 14305 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE CELLULAR GLASS (CG) PRODUCTS - SPECIFICATION
02/701820 DC : 0 BS EN 14303 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION
10/30213983 DC : 0 BS EN 13170 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF EXPANDED CORK (ICB) - SPECIFICATION
DIN EN 12733:2016-08 (Draft) AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY
DIN EN 16272-1:2013-01 Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics - Sound absorption in the laboratory under diffuse sound field conditions
DIN EN 14304 E : 2016 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE FLEXIBLE ELASTOMERIC FOAM (FEF) PRODUCTS - SPECIFICATION
DIN EN 15498 E : 2008 PRECAST CONCRETE PRODUCTS - WOOD-CHIP CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE
13/30258117 DC : 0 BS EN 15101-1 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE FILL CELLULOSE (LFCI) PRODUCTS - PART 1: SPECIFICATION FOR THE PRODUCTS BEFORE INSTALLATION
DIN EN 1090-5 E : 2017 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
DIN EN 15283-1:2009-12 Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 1: Gypsum boards with mat reinforcement (includes Amendment A1:2009)
UNI EN 15283-2 : 2009 GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 2: GYPSUM FIBRE BOARDS
DIN EN 15498:2008-08 PRECAST CONCRETE PRODUCTS - WOOD-CHIP CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE
12/30268211 DC : 0 BS EN 16487 - ACOUSTICS - TEST CODE FOR SUSPENDED CEILINGS - SOUND ABSORPTION
UNE-EN 60335-2-77:2011 Safety of household and similar appliances -- Part 2-77: Particular requirements for pedestrian-controlled walk-behind electrically powered lawn mowers
BS EN 16069 : 2012 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF POLYETHYLENE FOAM (PEF) - SPECIFICATION
PREN 13167 : DRAFT 2010 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE CELLULAR GLASS (CG) PRODUCTS - SPECIFICATION
11/30243088 DC : 0 BS EN 16272-1 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 1: INTRINSIC CHARACTERISTICS - SOUND ABSORPTION IN THE LABORATORY UNDER DIFFUSE SOUND FIELD CONDITIONS
UNE-EN 14305:2017 Thermal insulation products for building equipment and industrial installations - Factory made cellular glass (CG) products - Specification
01/105976 DC : DRAFT JULY 2001 PREN 14246 - GYPSUM ELEMENTS FOR SUSPENDED CEILINGS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
08/30169549 DC : DRAFT APR 2008 BS EN 13168 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE WOOD WOOL (WW) PRODUCTS - SPECIFICATION
BS EN 50636-2-94:2014 Household and similar electrical appliances. Safety Particular requirements for scissors type grass shears
BS EN 50434:2014 Safety of household and similar appliances. Particular requirements for mains operated shredders and chippers
10/30213977 DC : 0 BS EN 13168 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE WOOD WOOL (WW) PRODUCTS - SPECIFICATION
BS EN 16272-4:2016 Railway applications. Track. Noise barriers and related devices acting on airborne sound propagation. Test method for determining the acoustic performance Intrinsic characteristics. In situ values of sound diffraction under direct sound field
DIN EN 14315-1:2013-04 THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED SPRAYED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) FOAM PRODUCTS - PART 1: SPECIFICATION FOR THE RIGID FOAM SPRAY SYSTEM BEFORE INSTALLATION
05/30138009 DC : DRAFT AUG 2005 EN 15319 - GENERAL PRINCIPLES OF DESIGN OF FIBROUS (GYPSUM) PLASTER WORKS
02/560743 DC : DRAFT FEB 2002 BS EN 14366 - LABORATORY MEASUREMENT OF NOISE FROM WASTE WATER INSTALLATIONS
02/120711 DC : 0 PREN 14315-1 - THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED SPRAYED RIGID POLYURETHANE FOAM (PUR) PRODUCTS - PART 1: SPECIFICATION FOR THE RIGID FOAM SPRAY SYSTEM BEFORE INSTALLATION
DIN EN 16487 E : 2015 ACOUSTICS - TEST CODE FOR SUSPENDED CEILINGS - SOUND ABSORPTION
04/30126133 DC : DRAFT NOV 2004 EN 15100-1 - THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED UREAFORMALDEHYDE FOAM (UF) PRODUCTS - PART 1: SPECIFICATION FOR THE FOAM SYSTEM BEFORE INSTALLATION
BS EN 50636-2-92:2014 Household and similar electrical appliances. Safety Particular requirements for pedestrian-controlled mains-operated lawn scarifiers and aerators
10/30213974 DC : 0 BS EN 13167 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE CELLULAR GLASS (CG) PRODUCTS - SPECIFICATION
BS EN 15498:2008 Precast concrete products. Wood-chip concrete shuttering blocks. Product properties and performance
08/30169556 DC : DRAFT APR 2008 BS EN 13170 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF EXPANDED CORK (ICB) - SPECIFICATION
10/30218976 DC : DRAFT JUNE 2010 BS EN 1793-1 - ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 1: INTRINSIC CHARACTERISTICS OF SOUND ABSORPTION
UNE-EN 14313:2017 Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification
BS EN 60335-2.77 : 2010 SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-77: PARTICULAR REQUIREMENTS FOR PEDESTRIAN-CONTROLLED WALK-BEHIND ELECTRICALLY POWERED LAWN MOWERS
PREN 13162 : DRAFT 2010 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION
DIN EN 1793-4 E : 2015 ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 4: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND DIFFRACTION
DIN EN 14305 E : 2016 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE CELLULAR GLASS (CG) PRODUCTS - SPECIFICATION
15/30304107 DC : DRAFT MAY 2015 BS EN 13684 - GARDEN EQUIPMENT - PEDESTRIAN CONTROLLED LAWN AERATORS AND SCARIFIERS - SAFETY
DIN EN 14305:2016-03 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE CELLULAR GLASS (CG) PRODUCTS - SPECIFICATION
BS EN 50636-2-107:2015 Safety of household and similar appliances Particular requirements for robotic battery powered electrical lawnmowers
PREN 438-7 : DRAFT 2014 HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 7: COMPACT LAMINATE AND HPL COMPOSITE PANELS FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES
I.S. EN 50636-2-94:2014 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-94: PARTICULAR REQUIREMENTS FOR SCISSORS TYPE GRASS SHEARS
BS EN 1307 : 2014 TEXTILE FLOOR COVERINGS - CLASSIFICATION
PREN 14190 : DRAFT 2011 GYPSUM PLASTERBOARD PRODUCTS FROM PROCESSING - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNI EN 12733 : 2009 AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY
NF EN 13684 : 2004 + A3 2010
PREN 14509 : DRAFT 2013 SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
I.S. EN 1307:2014 TEXTILE FLOOR COVERINGS - CLASSIFICATION
EN 50636-2-107 : 2015 AMD 1 2018 SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-107: PARTICULAR REQUIREMENTS FOR ROBOTIC BATTERY POWERED ELECTRICAL LAWNMOWERS
DIN EN 13684:2015-05 (Draft) GARDEN EQUIPMENT - PEDESTRIAN CONTROLLED LAWN AERATORS AND SCARIFIERS - SAFETY
UNI EN 15498 : 2008 PRECAST CONCRETE PRODUCTS - WOOD-CHIP CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE
EN 1307:2014+A2:2018 Textile floor coverings - Classification
EN 13684:2004+A3:2009 Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety
PREN 13171 : DRAFT 2010 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE WOOD FIBRE (WF) PRODUCTS - SPECIFICATION
PREN 13915 : DRAFT 2016 PREFABRICATED GYPSUM PLASTERBOARD PANELS WITH A CELLULAR PAPERBOARD CORE - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNE-EN 16272-1:2013 Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics - Sound absorption in the laboratory under diffuse sound field conditions
I.S. EN 14509:2013 SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
I.S. EN 15498:2008 PRECAST CONCRETE PRODUCTS - WOOD-CHIP CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE
BS EN 13684 : 2004 GARDEN EQUIPMENT - PEDESTRIAN CONTROLLED LAWN AERATORS AND SCARIFIERS - SAFETY
DIN EN 13171:2015-04 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE WOOD FIBRE (WF) PRODUCTS - SPECIFICATION
DIN EN 12750:2013-05 Safety of woodworking machines - Four sided moulding machines
DIN EN 1470:2009-02 TEXTILE FLOOR COVERINGS - CLASSIFICATION OF NEEDLED FLOOR COVERINGS EXCEPT FOR NEEDLED PILE FLOOR COVERINGS
DIN EN 13167:2015-04 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE CELLULAR GLASS (CG) PRODUCTS - SPECIFICATION
DIN EN 786:2012-01 GARDEN EQUIPMENT - ELECTRICALLY POWERED WALK-BEHIND AND HAND-HELD LAWN TRIMMERS AND LAWN EDGE TRIMMERS - MECHANICAL SAFETY
DIN EN 438-7:2005-04 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes; German version EN 438-7:2005
DIN EN 13950:2014-09 GYPSUM BOARD THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
DIN EN 13915:2016-02 (Draft) PREFABRICATED GYPSUM PLASTERBOARD PANELS WITH A CELLULAR PAPERBOARD CORE - DEFINITIONS, REQUIREMENTS AND TEST METHODS
DIN EN 13964:2014-08 SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
DIN EN 15319 E : 2007 GENERAL PRINCIPLES OF DESIGN OF FIBROUS (GYPSUM) PLASTER WORKS
DIN EN 15114:2008-11 TEXTILE FLOOR COVERINGS - CLASSIFICATION OF TEXTILE FLOOR COVERINGS WITHOUT PILE
UNE-EN 14509:2014 Self-supporting double skin metal faced insulating panels - Factory made products - Specifications
BS EN 1218-2 : 2004 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 2: DOUBLE END TENONING AND/OR PROFILING MACHINES FED BY CHAIN OR CHAINS
BS EN 1520:2011 Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement
BS EN 15114 : 2006 TEXTILE FLOOR COVERINGS - CLASSIFICATION OF TEXTILE FLOOR COVERINGS WITHOUT PILE
EN 13986:2004 Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking
I.S. EN 14366:2005 LABORATORY MEASUREMENT OF NOISE FROM WASTE WATER INSTALLATIONS
EN 13986:2004+A1:2015 Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking
EN 16272-1:2012 Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics - Sound absorption in the laboratory under diffuse sound field conditions
EN 15283-1:2008+A1:2009 Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 1: Gypsum boards with mat reinforcement
EN 13964:2014 Suspended ceilings - Requirements and test methods
UNI EN 13683 : 2011 GARDEN EQUIPMENT - INTEGRALLY POWERED SHREDDERS/CHIPPERS - SAFETY
UNI EN 14509 : 2013 SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
UNI EN 14910 : 2010 GARDEN EQUIPMENT - WALK-BEHIND COMBUSTION ENGINE POWERED TRIMMERS - SAFETY
UNI EN 786 : 2010 GARDEN EQUIPMENT - ELECTRICALLY POWERED WALK-BEHIND AND HAND-HELD LAWN TRIMMERS AND LAWN EDGE TRIMMERS - MECHANICAL SAFETY
UNI EN 520 : 2009 GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNI EN 12750 : 2013 SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
UNI EN 15114 : 2008 TEXTILE FLOOR COVERINGS - CLASSIFICATION OF TEXTILE FLOOR COVERINGS WITHOUT PILE
UNI EN 1218-4 : 2009 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 4: EDGE BANDING MACHINES FED BY CHAIN(S)
UNI EN 1520 : 2011 Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non- structural reinforcement
UNI EN 14190 : 2014 GYPSUM BOARD PRODUCTS FROM REPROCESSING - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNI EN 13964 : 2014 SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
EN 1793-1:2017 Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics of sound absorption under diffuse sound field conditions
UNI EN 836 : 2011 GARDEN EQUIPMENT - POWERED LAWNMOWERS - SAFETY
UNI EN 14246 : 2006 GYPSUM ELEMENTS FOR SUSPENDED CEILINGS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNI EN 13279-1 : 2008 GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS
UNI EN 13950 : 2014 GYPSUM BOARD THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
00/105211 DC : DRAFT JULY 2000 PREN 13950 - GYPSUM PLASTERBOARD THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNI EN 13684 : 2010 GARDEN EQUIPMENT - PEDESTRIAN CONTROLLED LAWN AERATORS AND SCARIFIERS - SAFETY
I.S. CEN TS 15398:2006 RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - FLOOR COVERING STANDARD SYMBOLS
UNI EN 16272-1 : 2012 RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 1: INTRINSIC CHARACTERISTICS - SOUND ABSORPTION IN THE LABORATORY UNDER DIFFUSE SOUND FIELD CONDITIONS
15/30315090 DC : DRAFT MAY 2015 BS EN 14304 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE FLEXIBLE ELASTOMERIC FOAM (FEF) PRODUCTS - SPECIFICATION
BS EN 50636-2-91:2014 Household and similar electrical appliances. Safety Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers
PREN 13170 : DRAFT 2010 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF EXPANDED CORK (ICB) - SPECIFICATION
05/30136552 DC : 0 PREN 14304 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE FLEXIBLE ELASTOMERIC FOAM (FEF) - SPECIFICATION
PREN 14303 : DRAFT 2015 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION
UNI EN 14315-1 : 2013 THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED SPRAYED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) FOAM PRODUCTS - PART 1: SPECIFICATION FOR THE RIGID FOAM SPRAY SYSTEM BEFORE INSTALLATION
UNI EN 14318-1 : 2013 THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED DISPENSED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) FOAM PRODUCTS - PART 1: SPECIFICATION FOR THE RIGID FOAM DISPENSED SYSTEM BEFORE INSTALLATION
PREN 13168 : DRAFT 2010 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE WOOD WOOL (WW) PRODUCTS - SPECIFICATION
02/102019 DC : DRAFT FEB 2002 PREN 12354-6 - BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM THE PERFORMANCE OF ELEMENTS - PART 6: SOUND ABSORPTION IN ENCLOSED SPACES
PREN 13684 : DRAFT 2015 GARDEN EQUIPMENT - PEDESTRIAN CONTROLLED LAWN AERATORS AND SCARIFIERS - SAFETY
06/30155788 DC : DRAFT SEP 2006 BS EN 13297 - TEXTILE FLOOR COVERINGS - CLASSIFICATION OF NEEDLED PILE FLOOR COVERINGS
11/30251988 DC : 0 BS EN 14190 - GYPSUM PLASTERBOARD PRODUCTS FROM PROCESSING - DEFINITIONS, REQUIREMENTS AND TEST METHODS
BS EN 1793-4:2015 Road traffic noise reducing devices. Test method for determining the acoustic performance Intrinsic characteristics. In situ values of sound diffraction
BS EN 14315-1:2013 Thermal insulating products for buildings. In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products Specification for the rigid foam spray system before installation
BS EN 14318-1:2013 Thermal insulating products for buildings. In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products Specification for the rigid foam dispensed system before installation
UNE-EN 16487:2015 Acoustics - Test code for suspended ceilings - Sound absorption
00/107014 DC : DRAFT OCT 2000 PREN 520 - GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNI EN 16487 : 2015 ACOUSTICS - TEST CODE FOR SUSPENDED CEILINGS - SOUND ABSORPTION
00/106800 DC : DRAFT OCT 2000 PREN 13915 - PREFABRICATED GYPSUM WALLBOARD PANELS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
DIN EN 14318-1 E : 2013 THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED DISPENSED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) FOAM PRODUCTS - PART 1: SPECIFICATION FOR THE RIGID FOAM DISPENSED SYSTEM BEFORE INSTALLATION
10/30213959 DC : 0 BS EN 13162 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION
BS EN 16272-1:2012 Railway applications. Track. Noise barriers and related devices acting on airborne sound propagation. Test method for determining the acoustic performance Intrinsic characteristics. Sound absorption in the laboratory under diffuse sound field conditions
08/30169540 DC : DRAFT APR 2008 BS EN 13165 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE RIGID POLYURETHANE FOAM (PUR) PRODUCTS - SPECIFICATION
BS EN 12733 : 2001 AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY
DIN EN 14509 E : 2013 SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
14/30297521 DC : 0 BS EN 16272-4 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 4: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND DIFFRACTION UNDER DIRECT SOUND FIELD CONDITIONS
05/30135869 DC : 0 EN 15283-1 - GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 1: GYPSUM BOARDS WITH MAT REINFORCEMENT
17/30357433 DC BS EN 13279-1. Gypsum binders and gypsum plasters. Part 1. Definitions and requirements
UNE-EN 1793-4:2015 Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In situ values of sound diffraction
PREN 15101-1 : DRAFT 2013 THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE FILL CELLULOSE (LFCI) PRODUCTS - PART 1: SPECIFICATION FOR THE PRODUCTS BEFORE INSTALLATION
PREN 15102 : DRAFT 2016 DECORATIVE WALLCOVERINGS - ROLL FORM
16/30342849 DC : 0 BS EN 12733 - AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY
DIN EN 15102:2016-02 (Draft) DECORATIVE WALL COVERINGS - ROLL AND PANEL FORM
I.S. EN 13684:2004 GARDEN EQUIPMENT - PEDESTRIAN CONTROLLED LAWN AERATORS AND SCARIFIERS - SAFETY
UNI EN 15102 : 2011 DECORATIVE WALL COVERINGS - ROLL AND PANEL FORM
I.S. EN 61243-3:2014 LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE
PREN 16491 : DRAFT 2012 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE COMPOSITE PRODUCTS - SPECIFICATION
CEI EN 50636-2-92 : 2015 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-92: PARTICULAR REQUIREMENTS FOR PEDESTRIAN-CONTROLLED MAINS-OPERATED LAWN SCARIFIERS AND AERATORS
I.S. EN 12733:2001 AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY
I.S. EN 14313:2015 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE POLYETHYLENE FOAM (PEF) PRODUCTS - SPECIFICATION
I.S. EN 15102:2007 DECORATIVE WALL COVERINGS - ROLL AND PANEL FORM
UNE-EN 12602:2011 Prefabricated reinforced components of autoclaved aerated concrete
I.S. EN 13279-1:2008 GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS
DIN EN 14915 E : 2013 SOLID WOOD PANELLING AND CLADDING - CHARACTERISTICS, REQUIREMENTS AND MARKING
DIN EN 14190:2014-09 Gypsum board products from reprocessing - Definitions, requirements and test methods
DIN EN 14474 E : 2005 PRECAST CONCRETE PRODUCTS - CONCRETE WITH WOOD CHIPS AS AGGREGATE - REQUIREMENTS AND TEST METHODS
DIN EN 836:2012-07 GARDEN EQUIPMENT - POWERED LAWNMOWERS - SAFETY
BS EN ISO 140-4:1998 Acoustics. Measurement of sound insulation in buildings and of building elements Field measurements of airborne sound insulation between rooms
BS EN 13950:2014 Gypsum board thermal/acoustic insulation composite panels. Definitions, requirements and test methods
BS EN 13915:2017 Prefabricated gypsum plasterboard panels with a cellular paperboard core. Definitions, requirements and test methods
UNE-EN 1793-1:2017 Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics of sound absorption under diffuse sound field conditions
BS EN 13167 : 2012 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE CELLULAR GLASS (CG) PRODUCTS - SPECIFICATION
BS EN 13683 : 2003 GARDEN EQUIPMENT - INTEGRALLY POWERED SHREDDERS/CHIPPERS - SAFETY
BS EN 13815:2006 Fibrous gypsum plaster casts. Definitions, requirements and test methods
BS EN 13171 : 2012 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE WOOD FIBRE (WF) PRODUCTS - SPECIFICATION
BS EN 13165 : 2012 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE RIGID POLYURETHANE FOAM (PU) PRODUCTS - SPECIFICATION
BS EN 14474:2004 Precast concrete products. Concrete with wood-chips as aggregate. Requirements and test methods
UNE-EN 13167:2013 Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification
BS EN 1218-4 : 2004 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 4: EDGE BANDING MACHINES FED BY CHAIN(S)
BS EN ISO 11654:1997 Acoustics. Sound absorbers for use in buildings. Rating of sound absorption
BS EN 15102 : 2007 DECORATIVE WALL COVERINGS - ROLL AND PANEL FORM
UNE-EN 13169:2013 Thermal insulation products for buildings - Factory made expanded perlite board (EPB) products - Specification
BS EN 13297:2007 Textile floor coverings. Classification of needled pile floor coverings
UNE-EN 12750:2013 Safety of woodworking machines - Four sided moulding machines
BS EN 1218-5 : 2004 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FEED CHAIN
BS EN 12750:2013 Safety of woodworking machines. Four sided moulding machines
DIN EN 15319:2007-10 General principles of design of fibrous (gypsum) plaster works
UNE-EN 14190:2014 Gypsum board products from reprocessing - Definitions, requirements and test methods
BS EN 13162 : 2012 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION
BS EN 13813:2002 Screed material and floor screeds. Screed material. Properties and requirements
UNE-EN 13162:2013 Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification
UNE-EN 13165:2013 Thermal insulation products for buildings - Factory made rigid polyurethane foam (PU) products - Specification
BS EN 13279-1:2008 Gypsum binders and gypsum plasters Definitions and requirements
UNE-EN 520:2005 Gypsum plasterboards - Definitions, requirements and test methods
UNE-EN 13171:2013 Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification
BS EN 14246:2006 Gypsum elements for suspended ceilings. Definitions, requirements and test methods
UNE-EN 16069:2013 Thermal insulation products for buildings - Factory made products of polyethylene foam (PEF) - Specification
UNE-EN 13170:2013 Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification
UNE-EN 13168:2013 Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification
BS EN ISO 140-7:1998 Acoustics. Measurement of sound insulation in buildings and of building elements Field measurements of impact sound insulation of floors
BS EN ISO 140-5:1998 Acoustics. Measurement of sound insulation in buildings and of building elements Field measurements of airborne sound insulation of facade elements and facades
UNE-EN 13986:2006 Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking
UNE-EN 61243-3:2015 Live working - Voltage detectors - Part 3: Two-pole low-voltage type
EN 14190:2014 Gypsum board products from reprocessing - Definitions, requirements and test methods
EN 13950:2014 Gypsum board thermal/acoustic insulation composite panels - Definitions, requirements and test methods
EN 14366:2004 Laboratory measurement of noise from waste water installations
EN 15283-2:2008+A1:2009 Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 2: Gypsum fibre boards
EN 16272-4:2016 Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In situ values of sound diffraction under direct sound field
EN 14305:2015 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE CELLULAR GLASS (CG) PRODUCTS - SPECIFICATION
EN 13168:2012+A1:2015 Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification
EN 1470:2008 Textile floor coverings - Classification of needled floor coverings except for needled pile floor coverings
EN 13297:2007/AC:2008 TEXTILE FLOOR COVERINGS - CLASSIFICATION OF NEEDLED PILE FLOOR COVERINGS
EN 520:2004+A1:2009 Gypsum plasterboards - Definitions, requirements and test methods
EN 13683:2003+A2:2011/AC:2013 GARDEN EQUIPMENT - INTEGRALLY POWERED SHREDDERS/CHIPPERS - SAFETY
EN 15498:2008 Precast concrete products - Wood-chip concrete shuttering blocks - Product properties and performance
EN 14910:2007+A1:2009 Garden equipment - Walk-behind combustion engine powered trimmers - Safety
EN 14246:2006/AC:2007 GYPSUM ELEMENTS FOR SUSPENDED CEILINGS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
EN 13815:2006 Fibrous gypsum plaster casts - Definitions, requirements and test methods
EN 14509:2013 Self-supporting double skin metal faced insulating panels - Factory made products - Specifications
EN 16069:2012+A1:2015 Thermal insulation products for buildings - Factory made products of polyethylene foam (PEF) - Specification
EN 13171:2012+A1:2015 Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification
EN 14474:2004 Precast concrete products - Concrete with wood-chips as aggregate - Requirements and test methods
EN 13915:2017 Prefabricated gypsum plasterboard panels with a cellular paperboard core - Definitions, requirements and test methods
EN 1520:2011 Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement
EN 14304:2015 Thermal insulation products for building equipment and industrial installations - Factory made flexible elastomeric foam (FEF) products - Specification
EN 774:1996/A3:2001 GARDEN EQUIPMENT - HAND HELD, INTEGRALLY POWERED HEDGE TRIMMERS - SAFETY
EN 438-7:2005 (edition 2) High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes
EN 15114:2006+A1:2008 Textile floor coverings - Classification of textile floor coverings without pile
EN 16487 : 2014 ACOUSTICS - TEST CODE FOR SUSPENDED CEILINGS - SOUND ABSORPTION
EN 14315-1:2013 Thermal insulating products for buildings - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 1: Specification for the rigid foam spray system before installation
EN 15319 : 2007 GENERAL PRINCIPLES OF DESIGN OF FIBROUS (GYPSUM) PLASTER WORKS
EN 14318-1:2013 Thermal insulating products for buildings - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 1: Specification for the rigid foam dispensed system before installation
EN 14313:2015 Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification
EN 786:1996+A2:2009 Garden equipment - Electrically powered walk-behind and hand-held lawn trimmers and lawn edge trimmers - Mechanical safety
EN 14303:2015 Thermal insulation products for building equipment and industrial installations - Factory made mineral wool (MW) products - Specification
EN 13813:2002 Screed material and floor screeds - Screed material - Properties and requirements
EN 836:1997+A4:2011 Garden equipment - Powered lawnmowers - Safety
DIN EN 14318-1:2013-04 THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED DISPENSED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) FOAM PRODUCTS - PART 1: SPECIFICATION FOR THE RIGID FOAM DISPENSED SYSTEM BEFORE INSTALLATION
CEI EN 50636-2-94 : 2015 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-94: PARTICULAR REQUIREMENTS FOR SCISSORS TYPE GRASS SHEARS
I.S. EN 438-7:2005 HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 7: COMPACT LAMINATE AND HPL COMPOSITE PANELS FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES
UNE-EN 15319:2012 General principles of design of fibrous (gypsum) plaster works
I.S. EN 50636-2-107:2015 SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-107: PARTICULAR REQUIREMENTS FOR ROBOTIC BATTERY POWERED ELECTRICAL LAWNMOWERS
I.S. EN 774:1996 GARDEN EQUIPMENT - HAND HELD, INTEGRALLY POWERED HEDGE TRIMMERS - SAFETY
CEI EN 60335-2-77 : 2011 SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-77: PARTICULAR REQUIREMENTS FOR PEDESTRIAN-CONTROLLED WALK-BEHIND ELECTRICALLY POWERED LAWN MOWERS
BS EN 50636-2-100:2014 Household and similar electrical appliances. Safety Particular requirements for hand-held mains-operated garden blowers, vacuums and blower vacuums
04/30111716 DC : DRAFT MAR 2004 EN 14910 - GARDEN EQUIPMENT - WALK-BEHIND COMBUSTION ENGINE POWERED TRIMMERS - SAFETY
10/30213968 DC : 0 BS EN 13165 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE RIGID POLYURETHANE FOAM (PU) PRODUCTS - SPECIFICATION
12/30260496 DC : 0 BS EN 12750 - SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
EN 1218-2:2004+A1:2009 Safety of woodworking machines - Tenoning machines - Part 2: Double end tenoning and/or profiling machines fed by chain or chains
BS EN 15283-2 : 2008 GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 2: GYPSUM FIBRE BOARDS
PREN 1793-1 : DRAFT 2015 ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 1: INTRINSIC CHARACTERISTICS OF SOUND ABSORPTION UNDER DIFFUSE SOUND FIELD CONDITIONS
UNE-EN 13915:2018 Prefabricated gypsum plasterboard panels with a cellular paperboard core - Definitions, requirements and test methods
13/30217369 DC : 0 BS EN 13964 - SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
15/30315093 DC : DRAFT MAY 2015 BS EN 14303 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION
13/30268273 DC : 0 BS EN 14915 - SOLID WOOD PANELLING AND CLADDING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
10/30213989 DC : 0 BS EN 16069 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF POLYETHYLENE FOAM (PEF) - SPECIFICATION
BS EN 14305:2015 Thermal insulation products for building equipment and industrial installations. Factory made cellular glass (CG) products. Specification
CEI EN 50636-2-107 : 2016 SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-107: PARTICULAR REQUIREMENTS FOR ROBOTIC BATTERY POWERED ELECTRICAL LAWNMOWERS
16/30332917 DC : 0 BS EN 13915 - PREFABRICATED GYPSUM PLASTERBOARD PANELS WITH A CELLULAR PAPERBOARD CORE - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNE-EN 14315-1:2013 Thermal insulating products for buildings. In-situ formed sprayed rigid polyurethane foam (PUR) products. Part 1: Specification for the rigid foam spray system before installation
UNE-EN 15102:2008 Decorative wallcoverings - Roll and panel form products
08/30179926 DC : DRAFT MAR 2008 BS EN 60335-2-77 - SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-77: PARTICULAR REQUIREMENTS FOR PEDESTRIAN-CONTROLLED WALK-BEHIND ELECTRICALLY POWERED LAWN MOWERS
I.S. EN 16272-1:2012 RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 1: INTRINSIC CHARACTERISTICS - SOUND ABSORPTION IN THE LABORATORY UNDER DIFFUSE SOUND
I.S. EN 15283-1:2008 GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 1: GYPSUM BOARDS WITH MAT REINFORCEMENT
CEI EN 50636-2-100 : 2015 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2: PARTICULAR REQUIREMENTS FOR HAND-HELD MAINS-OPERATED GARDEN BLOWERS, VACUUMS AND BLOWER VACUUMS
UNE-EN 15101-1:2015 Thermal insulation products for buildings - In-situ formed loose fill cellulose (LFCI) products - Part 1: Specification for the products before installation
BS EN 12602:2016 Prefabricated reinforced components of autoclaved aerated concrete
PREN 13964 : DRAFT 2013 SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
BS EN 15101-1:2013 Thermal insulation products for buildings. In-situ formed loose fill cellulose (LFCI) products Specification for the products before installation
I.S. EN 14318-1:2013 THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED DISPENSED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) FOAM PRODUCTS - PART 1: SPECIFICATION FOR THE RIGID FOAM DISPENSED SYSTEM BEFORE INSTALLATION
I.S. EN 50434:2014 SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PARTICULAR REQUIREMENTS FOR MAINS OPERATED SHREDDERS AND CHIPPERS
EN 60335-2-77:2010 Safety of household and similar appliances - Part 2-77: Particular requirements for pedestrian-controlled walk-behind electrically powered lawn mowers
I.S. EN 61481-1:2014 LIVE WORKING - PHASE COMPARATORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C.
UNE-EN 13815:2012 Fibrous gypsum plaster casts - Definitions, requirements and test methods
16/30325907 DC : 0 BS EN 15102 - DECORATIVE WALLCOVERINGS - ROLL FORM
BS EN 14313 : 2009 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE POLYETHYLENE FOAM (PEF) PRODUCTS - SPECIFICATION
15/30301583 DC : 0 BS EN 16863 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE REFLECTIVE INSULATION PRODUCTS (RI) - SPECIFICATION
17/30353879 DC : 0 BS EN 17104 - THERMOPLASTICS RIGID PROTECTIVE WALLCOVERING PANELS FOR INTERNAL USE IN BUILDINGS - PERFORMANCE CHARACTERISTICS
13/30273886 DC : 0 BS EN 16518 - RESILIENT FLOOR COVERINGS - MEASUREMENT OF IN-ROOM IMPACT NOISE
CEI EN 50636-2-91 : 2015 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-91: PARTICULAR REQUIREMENTS FOR WALK-BEHIND AND HAND-HELD LAWN TRIMMERS AND LAWN EDGE TRIMMERS
BS EN 14366:2004 Laboratory measurement of noise from waste water installations
EN 12733:2001+A1:2009 Agricultural and forestry machinery - Pedestrian controlled motor mowers - Safety
I.S. EN 15283-2:2008 GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 2: GYPSUM FIBRE BOARDS
I.S. EN 12602:2016 PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE
I.S. EN 60335-2-77:2010 SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-77: PARTICULAR REQUIREMENTS FOR PEDESTRIAN-CONTROLLED WALK-BEHIND ELECTRICALLY POWERED LAWN MOWERS
DIN EN 13297:2007-12 TEXTILE FLOOR COVERINGS - CLASSIFICATION OF NEEDLED PILE FLOOR COVERINGS
DIN EN 1218-2:2009-10 Safety of woodworking machines - Tenoning machines - Part 2: Double end tenoning and/or profiling machines fed by chain or chains (includes Amendment A1:2009)
DIN EN 14246 E : 2006 GYPSUM ELEMENTS FOR SUSPENDED CEILINGS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
DIN EN 520:2009-12 Gypsum plasterboards - Definitions, requirements and test methods (includes Amendment A1:2009)
DIN EN 1218-5:2010-02 Safety of woodworking machines - Tenoning machines - Part 5: One side profiling machines with fixed table and feed rollers or feed chain (includes Amendment A1:2009)
UNE-EN 13964:2016 Suspended ceilings - Requirements and test methods
BS EN 1793-1:2017 Road traffic noise reducing devices. Test method for determining the acoustic performance Intrinsic characteristics of sound absorption under diffuse sound field conditions
BS EN 13986 : 2004 WOOD-BASED PANELS FOR USE IN CONSTRUCTION - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
BS EN 1470:2008 Textile floor coverings. Classification of needled floor coverings except for needled pile floor coverings
BS EN 13170 : 2012 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF EXPANDED CORK (ICB) - SPECIFICATION
BS EN 14915 : 2013 SOLID WOOD PANELLING AND CLADDING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
BS EN 14910 : 2007 GARDEN EQUIPMENT - WALK-BEHIND COMBUSTION ENGINE POWERED TRIMMERS - SAFETY
BS EN 15319:2007 General principles of design of fibrous (gypsum) plaster works
BS EN 13964:2014 Suspended ceilings. Requirements and test methods
EN 13170:2012+A1:2015 Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification
EN 13169:2012+A1:2015 Thermal insulation products for buildings - Factory made expanded perlite board (EPB) products - Specification
EN 13167:2012+A1:2015 Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification
DIN EN 14474:2005-03 Precast concrete products - Concrete with wood-chips as aggregate - Requirements and test methods; German version EN 14474:2004
UNI EN 1218-2 : 2009 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 2: DOUBLE END TENONING AND/OR PROFILING MACHINES FED BY CHAIN OR CHAINS
DIN EN 774:1997-12 GARDEN EQUIPMENT - HAND-HELD, INTEGRALLY-POWERED HEDGE TRIMMERS - SAFETY
EN 50636-2-92:2014 Household and similar electrical appliances - Safety - Part 2-92: Particular requirements for pedestrian-controlled mains-operated lawn scarifiers and aerators
DIN EN 14915:2013-12 SOLID WOOD PANELLING AND CLADDING - CHARACTERISTICS, REQUIREMENTS AND MARKING
NF EN 1218-5 : 2004 + A1 2010 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FED BY CHAIN
EN 1793-4:2015 Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In situ values of sound diffraction
EN 13279-1:2008 Gypsum binders and gypsum plasters - Part 1: Definitions and requirements
DIN EN 836 A1 : 1998 GARDEN EQUIPMENT - POWERED LAWNMOWERS - SAFETY
EN 50434:2014 Safety of household and similar appliances - Particular requirements for mains operated shredders and chippers
EN 12750:2013 Safety of woodworking machines - Four sided moulding machines
EN 13165:2012+A2:2016 Thermal insulation products for buildings - Factory made rigid polyurethane foam (PU) products - Specification
EN 50636-2-91:2014 Household and similar electrical appliances - Safety - Part 2-91: Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers
UNE-EN 14915:2013 Solid wood panelling and cladding - Characteristics, evaluation of conformity and marking
UNE-EN 13986:2006+A1:2015 Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking
UNE-EN 13162:2013+A1:2015 Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification

ISO 266:1997 Acoustics — Preferred frequencies
ISO 9613-1:1993 Acoustics Attenuation of sound during propagation outdoors Part 1: Calculation of the absorption of sound by the atmosphere
ISO/TR 140-13:1997 Acoustics — Measurement of sound insulation in buildings and of building elements — Part 13: Guidelines
ISO 11654:1997 Acoustics — Sound absorbers for use in buildings — Rating of sound absorption
EN ISO 266 : 1997 ACOUSTICS - PREFERRED FREQUENCIES (ISO 266:1997)
ISO 3382:1997 Acoustics — Measurement of the reverberation time of rooms with reference to other acoustical parameters
IEC 61260:1995 Electroacoustics - Octave-band and fractional-octave-band filters

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.