• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN ISO 4259:2006

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Petroleum products - Determination and application of precision data in relation to methods of test (ISO 4259:2006)

Superseded date

01-12-2017

Published date

01-08-2006

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Stages in the planning of an inter-laboratory test
   programme for the determination of the precision of
   a test method
   4.1 General
   4.2 Preparing a draft method of test
   4.3 Planning a pilot programme with at least two
       laboratories
   4.4 Planning the inter-laboratory programme
   4.5 Executing the inter-laboratory programme
5 Inspection of inter-laboratory results for uniformity
   and for outliers
   5.1 General
   5.2 Transformation of data
   5.3 Tests for outliers
   5.4 Rejection of complete data from a sample
   5.5 Estimating missing or rejected values
   5.6 Rejection test for outlying laboratories
   5.7 Confirmation of selected transformation
6 Analysis of variance, calculation and expression of
   precision estimates
   6.1 General
   6.2 Analysis of variance
   6.3 Expectation of mean squares and calculation of
       precision estimates
   6.4 Expression of precision estimates of a method of test
7 Significance of repeatability (r) and reproducibility (R)
   7.1 General
   7.2 Repeatability, r
   7.3 Reproducibility, R
8 Specifications
   8.1 Aim of specifications
   8.2 Construction of specifications limits in relation
       to precision
9 Quality control against specifications
   9.1 General
   9.2 Testing margin at the supplier
   9.3 Testing margin at the recipient
10 Dispute procedure
Annex A (normative) Determination of number of samples
                      required
Annex B (informative) Derivation of equation for calculating
                      the number of samples required
Annex C (normative) Notation and tests
Annex D (normative) Example results of test for determination
                      of bromine number and statistical tables
Annex E (normative) Types of dependence and corresponding
                      transformations
Annex F (normative) Weighted linear regression analysis
Annex G (normative) Rules for rounding off results
Annex H (informative) Explanation of equations given in Clause 7
Annex I (informative) Specifications that relate to a specified
                      degree of criticality
Bibliography

ISO 4259:2006 covers the calculation of precision estimates and their application to specifications. In particular, it contains definitions of relevant statistical terms, the procedures to be adopted in the planning of an inter-laboratory test programme to determine the precision of a test method, the method of calculating the precision from the results of such a programme, and the procedure to be followed in the interpretation of laboratory results in relation both to precision of the test methods and to the limits laid down in specifications.The procedures in ISO 4259:2006 have been designed specifically for petroleum and petroleum-related products, which are normally homogeneous. However, the procedures described in this International Standard can also be applied to other types of homogeneous products. Careful investigations are necessary before applying ISO 4259:2006 to products for which the assumption of homogeneity can be questioned.

Committee
CEN/TC 19
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Superseded
SupersededBy
Supersedes

I.S. EN 14104:2003 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF ACID VALUE
I.S. EN 16270:2015 AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS INCLUDING FATTY ACID METHYL ESTERS IN PETROL AND ETHANOL (E85) AUTOMOTIVE FUEL - GAS CHROMATOGRAPHIC METHOD
I.S. EN 14110:2003 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF METHANOL CONTENT
I.S. EN 14517:2004 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF HYDROCARBON TYPES AND OXYGENATES IN PETROL - MULTIDIMENSIONAL GAS CHROMATOGRAPHY METHOD
I.S. EN 15199-2:2006 PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 2: HEAVY DISTILLATES AND RESIDUAL FUELS
I.S. EN 14078:2014 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD
I.S. EN 12662:2014 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS
I.S. EN 15492:2012 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE AND SULFATE CONTENT - ION CHROMATOGRAPHIC METHOD
I.S. EN 12846:2002 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF EFFLUX TIME OF BITUMEN EMULSIONS BY THE EFFLUX VISCOMETER
I.S. EN 14105:2011 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF FREE AND TOTAL GLYCEROL AND MONO-, DI-, TRIGLYCERIDE CONTENTS
I.S. EN 16709:2015 AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS
I.S. EN 12916:2016 PETROLEUM PRODUCTS - DETERMINATION OF AROMATIC HYDROCARBON TYPES IN MIDDLE DISTILLATES - HIGH PERFORMANCE LIQUID CHROMATOGRAPHY METHOD WITH REFRACTIVE INDEX DETECTION
I.S. EN 116:2015 DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - STEPWISE COOLING BATH METHOD
EN 14214:2012+A1:2014/AC:2014 LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS
I.S. EN 15484:2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE - POTENTIOMETRIC METHOD
I.S. EN 14111:2003 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF IODINE VALUE
I.S. EN 14108:2003 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF SODIUM CONTENT BY ATOMIC ABSORPTION SPECTROMETRY
I.S. EN 12766-3:2005 PETROLEUM PRODUCTS AND USED OILS - DETERMINATION OF PCBS AND RELATED PRODUCTS - PART 3: DETERMINATION AND QUANTIFICATION OF POLYCHLORINATED TERPHENYLS (PCT) AND POLYCHLORINATED BENZYL TOLUENES (PCBT) CONTENT BY GAS CHROMATOGRAPHY (GC) USING AN ELECTRON CAPTURE DETECTOR (ECD)
I.S. EN 14109:2003 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF POTASSIUM CONTENT BY ATOMIC ABSORPTION SPECTROMETRY
UNE-EN 15492:2012 Ethanol as a blending component for petrol - Determination of inorganic chloride and sulfate content - Ion chromatographic method
DIN EN 15492:2012-04 Ethanol as a blending component for petrol - Determination of inorganic chloride and sulfate content - Ion chromatographic method
DIN EN 15489:2007-11 Ethanol as a blending component for petrol - Determination of water content - Karl Fischer coulometric titration method
DIN EN 12662:1998-10 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS
DIN EN 15491:2007-11 Ethanol as a blending component for petrol - Determination of total acidity - Colour indicator titration method
CEN/TR 16885:2015 Liquid petroleum products - Investigation on test method for measurement of the oxidation stability of diesel and diesel/FAME blends by Acid Number after ageing
CEN/TR 15138:2005 Petroleum products and other liquids - Guide to flash point testing
BS EN 15195:2014 Liquid petroleum products. Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber
BS EN 14214:2012 LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS
BS EN 15984:2017 Petroleum industry and products. Determination of composition of refinery heating gas and calculation of carbon content and calorific value. Gas chromatography method
EN 14105:2011 Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of free and total glycerol and mono-, di-, triglyceride contents
EN 12916:2016 Petroleum products - Determination of aromatic hydrocarbon types in middle distillates - High performance liquid chromatography method with refractive index detection
BS EN 12847:2002 Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of settling tendency of bitumen emulsions
BS EN 16906:2017 Liquid petroleum products. Determination of the ignition quality of diesel fuels. BASF engine method
EN 12846:2002 Bitumen and bituminous binders - Determination of efflux time of bitumen emulsions by the efflux viscometer
BS EN 16896:2016 Petroleum products and related products. Determination of kinematic viscosity. Method by Stabinger type viscosimeter
CEN/TR 15139:2005 Petroleum products and other liquids - Applicability of test methods on sulfur determination in petrol and diesel fuel
DIN EN 16135:2012-02 AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS)
EN 15984:2017 Petroleum industry and products - Determination of composition of refinery heating gas and calculation of carbon content and calorific value - Gas chromatography method
DIN EN 16294:2013-02 PETROLEUM PRODUCTS AND FAT AND OIL DERIVATIVES - DETERMINATION OF PHOSPHORUS CONTENT IN FATTY ACID METHYL ESTERS (FAME) - OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES)
DIN EN 16709:2015-12 AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS
DIN EN 14833:2005-09 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE HYDROLYTIC STABILITY OF FIRE-RESISTANT PHOSPHATE ESTER FLUIDS
BS EN 16136:2015 Automotive fuels. Determination of manganese and iron content in unleaded petrol. Inductively coupled plasma optical emission spectrometry (ICP OES) method
DIN EN 15470:2017-09 LIQUEFIED PETROLEUM GASES - DETERMINATION OF DISSOLVED RESIDUES - HIGH TEMPERATURE GAS CHROMATOGRAPHIC METHOD
DIN EN 16761-2:2016-02 AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 2: METHOD USING HEART CUT TECHNIQUE
DIN EN 14109:2003-10 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF POTASSIUM CONTENT BY ATOMIC ABSORPTION SPECTROMETRY
ISO 6245:2001 Petroleum products — Determination of ash
EN 116:2015 Diesel and domestic heating fuels - Determination of cold filter plugging point - Stepwise cooling bath method
DIN EN 14103:2015-05 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF ESTER AND LINOLENIC ACID METHYL ESTER CONTENTS
EN 12697-3:2013 Bituminous mixtures - Test methods for hot mix asphalt - Part 3: Bitumen recovery: Rotary evaporator
BS EN 12916:2016 Petroleum products. Determination of aromatic hydrocarbon types in middle distillates. High performance liquid chromatography method with refractive index detection
BS EN 14104:2003 Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of acid value
DIN EN 12848:2009-07 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF MIXING STABILITY WITH CEMENT OF BITUMINOUS EMULSIONS
EN 12848:2009 Bitumen and bituminous binders - Determination of mixing stability with cement of bituminous emulsions
DIN EN 12591:2009-08 BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS
BS EN 1601:2017 Liquid petroleum products. Determination of organic oxygenate compounds and total organically bound oxygen content in unleaded petrol. Method by gas chromatography (O-FID)
BS EN 12697-3 : 2013 BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 3: BITUMEN RECOVERY: ROTARY EVAPORATOR
DIN EN 15940:2016-09 AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS
BS EN 12591:2009 Bitumen and bituminous binders. Specifications for paving grade bitumens
BS EN 15199-2:2006 Petroleum products. Determination of boiling range distribution by gas chromatography method Heavy distillates and residual fuel
BS EN 589 : 2008 AUTOMOTIVE FUELS - LPG - REQUIREMENTS AND TEST METHODS
CR 13839:2000 Petroleum products - Determination of aromaticity - 13C nuclear magnetic resonance (NMR) spectrometric method
DIN EN 1601:2017-10 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT IN UNLEADED PETROL - METHOD BY GAS CHROMATOGRAPHY (O-FID)
BS EN 14865-2 : 2006 RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 2: METHOD TO TEST THE MECHANICAL STABILITY TO COVER VEHICLE SPEEDS UP TO 200 KM/H
CR 13840:2000 Petroleum products - Determination of polycyclic aromatic hydrocarbons - Ultraviolet (UV) spectrometric method
BS EN 590 : 2013 AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS
DIN EN 12916:2016-06 PETROLEUM PRODUCTS - DETERMINATION OF AROMATIC HYDROCARBON TYPES IN MIDDLE DISTILLATES - HIGH PERFORMANCE LIQUID CHROMATOGRAPHY METHOD WITH REFRACTIVE INDEX DETECTION
DIN EN 12662:2014-07 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS
DIN EN 14106:2003-10 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF FREE GLYCEROL CONTENT
DIN EN 14111:2003-10 Fat and oil derivatives - Fatty acid methyl esters (FAME) - Determination of iodine value
EN 12766-2:2001 Petroleum products and used oils - Determination of PCBs and related products - Part 2: Calculation of polychlorinated biphenyl (PCB) content
DIN EN 12697-3:2013-08 BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 3: BITUMEN RECOVERY: ROTARY EVAPORATOR
DIN EN 16329:2013-07 Diesel and domestic heating fuels - Determination of cold filter plugging point - Linear cooling bath method
BS EN 14865-1 : 2009 RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 1: METHOD TO TEST THE ABILITY TO LUBRICATE
BS EN 13924-1:2015 Bitumen and bituminous binders. Specification framework for special paving grade bitumen Hard paving grade bitumens
EN 12662:2014 Liquid petroleum products - Determination of total contamination in middle distillates, diesel fuels and fatty acid methyl esters
DIN EN 15470:2016-01 (Draft) LIQUEFIED PETROLEUM GASES - DETERMINATION OF DISSOLVED RESIDUES - HIGH TEMPERATURE GAS CHROMATOGRAPHIC METHOD
DIN EN 16934:2015-12 (Draft) AUTOMOTIVE FUELS AND FAT AND OIL DERIVATES - DETERMINATION OF STERYL GLYCOSIDES IN FATTY ACID METHYL ESTERS (FAME) - METHOD BY GC-MS WITH PRIOR PURIFICATION BY SPE
DIN EN 15376:2014-12 AUTOMOTIVE FUELS - ETHANOL AS A BLENDING COMPONENT FOR PETROL - REQUIREMENTS AND TEST METHODS
DIN EN 14078:2004-03 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD
CEN/TR 15160:2005 Petroleum and related products - Applicability of diesel fuel test methods for Fatty Acid Methyl Esters (FAME) - Information and results on round robin tests
DIN EN 15751:2014-06 AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD
BS EN 16294:2012 Petroleum products and fat and oil derivatives. Determination of phosphorus content in fatty acid methyl esters (FAME). Optical emission spectral analysis with inductively coupled plasma (ICP OES)
I.S. EN 14865-1:2009 RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 1: METHOD TO TEST THE ABILITY TO LUBRICATE
BS EN 16144:2012 Liquid petroleum products. Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels. Fixed range injection period, constant volume combustion chamber method
BS EN 16476:2014 Liquid petroleum products. Determination of Sodium, Potassium, Calcium, Phosphorus, Copper and Zinc contents in diesel fuel. Method via Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES)
I.S. EN 16568:2014 AUTOMOTIVE FUELS - BLENDS OF FATTY ACID METHYL ESTER (FAME) WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY RAPIDLY ACCELERATED OXIDATION METHOD AT 120 DEGREES C
PD CEN/TR 16514:2013 Automotive fuels. Unleaded petrol containing more than 3,7 % (m/m) oxygen. Roadmap, test methods, and requirements for E10+ petrol
BS EN 15721:2013 Ethanol as a blending component for petrol. Determination of higher alcohols, methanol and other impurities. Gas chromatographic method
BS 2000-507(2006) : 2006 PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 2: HEAVY DISTILLATES AND RESIDUAL FUELS
I.S. EN 16906:2017 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - BASF ENGINE METHOD
UNI EN 16091 : 2012 LIQUID PETROLEUM PRODUCTS - MIDDLE DISTILLATES AND FATTY ACID METHYL ESTER (FAME) FUELS AND BLENDS - DETERMINATION OF OXIDATION STABILITY BY RAPID SMALL SCALE OXIDATION METHOD
BS EN 15779 : 2009 PETROLEUM PRODUCTS AND FAT AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - DETERMINATION OF POLYUNSATURATED (>= 4 DOUBLE BONDS) FATTY ACID METHYL ESTERS (PUFA) BY GAS CHROMATOGRAPHY
BS 2000-485(2003) : 2003 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF SETTLING TENDENCY OF BITUMEN EMULSIONS
I.S. EN 14865-2:2006 RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 2: METHOD TO TEST THE MECHANICAL STABILITY TO COVER VEHICLE SPEEDS UP TO 200 KM/H
BS EN 13924-2:2014 Bitumen and bituminous binders. Specification framework for special paving grade bitumen Multigrade paving grade bitumens
BS EN 15492:2012 Ethanol as a blending component for petrol. Determination of inorganic chloride and sulfate content. Ion chromatographic method
UNI EN 15199-3 : 2008 PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 3: CRUDE OIL
I.S. EN 14274:2013 AUTOMOTIVE FUELS - ASSESSMENT OF PETROL AND DIESEL QUALITY - FUEL QUALITY MONITORING SYSTEM (FQMS)
I.S. EN 16136:2015 AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN UNLEADED PETROL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD
I.S. EN 14213:2003 HEATING FUELS - FATTY ACID METHYL ESTERS (FAME) - REQUIREMENTS AND TEST METHODS
I.S. EN 14112:2016 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF OXIDATION STABILITY (ACCELERATED OXIDATION TEST)
BS EN 15199-1:2006 Petroleum products. Determination of boiling range distribution by gas chromatography method Middle distillates and lubricating base oils
DIN EN 12766-3:2005-02 Petroleum products and used oils - Determination of PCBs and related products - Part 3: Determination and quantification of polychlorinated terphenyls (PCT) and polychlorinated benzyl toluenes (PCBT) content by gas chromatography (GC) using an electron capture detector (ECD)
DIN EN 14213:2003-11 HEATING FUELS - FATTY ACID METHYL ESTERS (FAME) - REQUIREMENTS AND TEST METHODS
I.S. EN 16576:2014 AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN DIESEL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD
I.S. EN 15691:2009 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF DRY RESIDUE (INVOLATILE MATERIAL) - GRAVIMETRIC METHOD
I.S. EN 15491:2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF TOTAL ACIDITY - COLOUR INDICATOR TITRATION METHOD
I.S. EN 15486:2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF SULFUR CONTENT - ULTRAVIOLET FLUORESCENCE METHOD
DIN EN 14108:2015-06 Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of sodium content by atomic absorption spectrometry; German version EN 14108:2003
DIN EN 15487:2007-11 Ethanol as a blending component for petrol - Determination of phosphorus content - Ammonium molybdate spectrometric method
DIN EN 14214:2003-11 LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS
DIN EN 14274:2013-05 Automotive fuels - Assessment of petrol and diesel quality - Fuel quality monitoring system (FQMS); German version EN 14274:2013
DIN EN 15199-3:2008-09 Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 3: Crude oil
DIN EN 15486:2007-11 Ethanol as a blending component for petrol - Determination of sulfur content - Ultraviolet fluorescence method
UNE-EN 16715:2016 Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection
DIN EN 16423:2014-02 Liquefied petroleum gases - Determination of dissolved residue - Gas chromatographic method using liquid, on-column injection
DIN EN 14104:2003-10 Fat and oil derivates - Fatty acid methyl esters (FAME) - Determination of acid value
UNE-EN 1601:2018 Liquid petroleum products - Determination of organic oxygenate compounds and total organically bound oxygen content in unleaded petrol - Method by gas chromatography (O-FID)
DIN 51825:2004-06 Lubricants - Lubricating greases K - Classification and requirements
DIN EN 15553:2007-07 Petroleum products and related materials - Determination of hydrocarbon types - Fluorescent indicator adsorption method
UNE-EN 15984:2018 Petroleum industry and products - Determination of composition of refinery heating gas and calculation of carbon content and calorific value - Gas chromatography method
DIN EN 14023:2013-04 Bitumen and bituminous binders - Specification framework for polymer modified bitumens
DIN EN 14865-2:2011-01 Railway applications - Axlebox lubricating greases - Part 2: Method to test the mechanical stability to cover vehicle speeds up to 200 km/h (includes Amendment A2:2010)
DIN EN 14214:2014-06 LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS
DIN EN 16476:2014-07 Liquid petroleum products - Determination of Sodium, Potassium, Calcium, Phosphorus, Copper and Zinc contents in diesel fuel - Method via Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES)
DIN EN 15484:2007-11 Ethanol as a blending component for petrol - Determination of inorganic chloride - Potentiometric method
DIN EN 14105:2011-07 Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of free and total glycerol and mono-, di-, triglyceride contents
DIN EN 15837:2010-04 Ethanol as a blending component for petrol - Determination of phosphorus, copper and sulfur content - Direct method by inductively coupled plasma optical emission spectrometry (ICP OES)
DIN EN 16144:2012-05 Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Fixed range injection period, constant volume combustion chamber method
DIN EN 15199-4:2015-12 Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 4: Light fractions of crude oil
DIN EN 15488:2007-11 Ethanol as a blending component for petrol - Determination of copper content - Graphite furnace atomic absorption spectrometric method
DIN EN 15779:2013-12 Petroleum products and fat and oil derivates - Fatty acid methyl esters (FAME) for diesel engines - Determination of polyunsaturated (<groesser
DIN EN 15199-2:2007-01 Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 2: Heavy distillates and residual fuels
DIN EN 589:2012-06 AUTOMOTIVE FUELS - LPG - REQUIREMENTS AND TEST METHODS
DIN EN 15984:2016-05 (Draft) PETROLEUM INDUSTRY AND PRODUCTS - DETERMINATION OF COMPOSITION OF REFINERY HEATING GAS AND CALCULATION OF CARBON CONTENT AND CALORIFIC VALUE - GAS CHROMATOGRAPHY METHOD
DIN EN 14865-1:2011-01 Railway applications - Axlebox lubricating greases - Part 1: Method to test the ability to lubricate (includes Amendment A1:2010)
DIN EN 15944:2011-02 Liquid petroleum products - Determination of nickel and vanadium content - Inductively coupled plasma optical emission spectrometry method (ICP OES)
DIN EN 15692:2009-08 Ethanol as a blending component for petrol - Determination of water content - Karl Fischer potentiometric titration method
DIN EN 15984:2017-10 Petroleum industry and products - Determination of composition of refinery heating gas and calculation of carbon content and calorific value - Gas chromatography method
DIN EN 15938:2010-12 Automotive fuels - Ethanol blending component and ethanol (E85) automotive fuel - Determination of electrical conductivity
DIN EN 15490:2007-11 Ethanol as a blending component for petrol - Determination of pHe
BS EN 15376:2014 Automotive fuels. Ethanol as a blending component for petrol. Requirements and test methods
DD CEN/TS 15293:2011 Automotive fuels. Ethanol (E85) automotive fuel. Requirements and test methods
BS EN 16709 : 2015 AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS
BS EN 15486:2007 Ethanol as a blending component for petrol. Determination of sulfur content. Ultraviolet fluorescence method
BS EN 15488:2007 Ethanol as a blending component for petrol. Determination of copper content. Graphite furnace atomic absorption spectrometric method
PD CEN/TR 15160:2005 Petroleum and related products. Applicability of diesel fuel test methods for fatty acid methyl esters (FAME). Information and results on round robin tests
DIN EN 16900:2015-09 (Draft) FAST PYROLYSIS BIO-OILS FOR INDUSTRIAL BOILERS - REQUIREMENTS AND TEST METHODS
BS EN 14023:2010 Bitumen and bituminous binders. Specification framework for polymer modified bitumens
BS EN 15489:2007 Ethanol as a blending component for petrol. Determination of water content. Karl Fischer coulometric titration method
I.S. EN 16091:2011 LIQUID PETROLEUM PRODUCTS - MIDDLE DISTILLATES AND FATTY ACID METHYL ESTER (FAME) FUELS AND BLENDS - DETERMINATION OF OXIDATION STABILITY BY RAPID SMALL SCALE OXIDATION METHOD
DIN EN 228:2004-03 AUTOMOTIVE FUELS - UNLEADED PETROL - REQUIREMENTS AND TEST METHODS
I.S. EN 16329:2013 DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - LINEAR COOLING BATH METHOD
PD CEN/TR 15138:2005 Petroleum products and other liquids. Guide to flash point testing
BS EN 14517:2004 Methods of test for petroleum and its products. BS 2000-526: Liquid petroleum products. Determination of hydrocarbon types and oxygenates in petrol. Multidimensional gas chromatography method
BS EN 14106:2003 Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of free glycerol content
BS EN 16715:2015 Liquid petroleum products. Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels. Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection
BS EN 16761-1:2015 Automotive fuels. Determination of methanol in automotive ethanol (E85) fuel by gas chromatography Method using single column technique
BS EN 13924:2006 Bitumen and bituminous binders. Specifications for hard paving grade bitumens
BS EN 16270:2015 Automotive fuels. Determination of high-boiling components including fatty acid methyl esters in petrol and ethanol (E85) automotive fuel. Gas chromatographic method
DIN EN 228:2017-08 AUTOMOTIVE FUELS - UNLEADED PETROL - REQUIREMENTS AND TEST METHODS
BS EN 15938:2010 Automotive fuels. Ethanol blending component and ethanol (E85) automotive fuel. Determination of electrical conductivity
BS EN 16423:2013 Liquefied petroleum gases. Determination of dissolved residue. Gas chromatographic method using liquid, on-column injection
BS EN 15487:2007 Ethanol as a blending component for petrol. Determination of phosphorus content. Ammonium molybdate spectrometric method
PD CEN/TR 15745:2015 Liquid petroleum products. Determination of hydrocarbon types and oxygenates via multidimensional gas chromatography method. Round Robin research report
PD CEN/TR 16366:2012 Liquid petroleum products. Middle distillates and fatty acid methyl ester (FAME) fuels and blends. Round Robin report on applicability of Rapid Small Scale Oxidation Test method
BS EN 16761-2:2015 Automotive fuels. Determination of methanol in automotive ethanol (E85) fuel by gas chromatography Method using heart cut technique
BS EN 14077:2003 Petroleum products. Determination of organic halogen content. Oxidative microcoulometric method
BS EN 14213:2003 Heating fuels. Fatty acid methyl esters (FAME). Requirements and test methods
BS EN 16576:2014 Automotive fuels. Determination of manganese and iron content in diesel. Inductively coupled plasma optical emission spectrometry (ICP OES) method
BS EN 14832:2005 Petroleum and related products. Determination of the oxidation stability and corrosivity of fire-resistant phosphate ester fluids
BS EN 116:2015 Diesel and domestic heating fuels. Determination of cold filter plugging point. Stepwise cooling bath method
PD CEN/TR 15139:2005 Petroleum products and other liquids. Applicability of test methods on sulfur determination in petrol and diesel fuel
PD CEN/TR 16389:2017 Automotive fuels. Paraffinic diesel fuel and blends with FAME. Background to the parameters required and their respective limits and determination
BS EN 15484:2007 Ethanol as a blending component for petrol. Determination of inorganic chloride. Potentiometric method
BS EN 14109:2003 Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of potassium content by atomic absorption spectrometry
BS EN 15691:2009 Ethanol as a blending component for petrol. Determination of total dry residue (involatile material). Gravimetric method
BS EN 14107:2003 Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of phosphorous content by inductively coupled plasma (ICP) emission spectrometry
BS EN 15485:2007 Ethanol as a blending component for petrol. Determination of sulfur content. Wavelength dispersive X-ray fluorescence spectrometric method
PD CEN/TR 16885:2015 Liquid petroleum products. Investigation on test method for measurement of the oxidation stability of diesel and diesel/FAME blends by Acid Number after ageing
BS EN 14833:2005 Petroleum and related products. Determination of the hydrolytic stability of fire-resistant phosphate ester fluids
BS EN 14108:2003 Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of sodium content by atomic absorption spectrometry
BS EN 14274:2013 Automotive fuels. Assessment of petrol and diesel quality. Fuel quality monitoring system (FQMS)
BS EN 14078:2014 Liquid petroleum products. Determination of fatty acid methyl ester (FAME) content in middle distillates. Infrared spectrometry method
BS EN 12766-2:2001 Methods of test for petroleum and its products. Petroleum products and used oils. Determination of PCBs and related products Calculation of polychlorinated biphenyl (PCB) content
BS EN 15751:2014 Automotive fuels. Fatty acid methyl ester (FAME) fuel and blends with diesel fuel. Determination of oxidation stability by accelerated oxidation method
BS EN 16143:2013 Petroleum products. Determination of content of Benzo(a)pyrene (BaP) and selected polycyclic aromatic hydrocarbons (PAH) in extender oils. Procedure using double LC cleaning and GC/MS analysis
BS EN 12766-3:2004 Petroleum products and used oils. Determination of PCBs and related products Determination and quantification of polychlorinated terphenyls (PCT) and polychlorinated benzyl toluenes (PCBT) content by gas chromatography (GC) using an electron capture detector (ECD)
BS EN 15837:2009 Ethanol as a blending component for petrol. Determination of phosphorus, copper and sulfur content. Direct method by inductively coupled plasma optical emission spectrometry (ICP OES)
BS EN 15490:2007 Ethanol as a blending component for petrol. Determination of pHe
I.S. EN 12849:2009 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF PENETRATION POWER OF BITUMINOUS EMULSIONS
I.S. EN 228:2017 AUTOMOTIVE FUELS - UNLEADED PETROL - REQUIREMENTS AND TEST METHODS
I.S. EN 15984:2017 PETROLEUM INDUSTRY AND PRODUCTS - DETERMINATION OF COMPOSITION OF REFINERY HEATING GAS AND CALCULATION OF CARBON CONTENT AND CALORIFIC VALUE - GAS CHROMATOGRAPHY METHOD
S.R. CEN/TR 16389:2017 AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL AND BLENDS WITH FAME - BACKGROUND TO THE PARAMETERS REQUIRED AND THEIR RESPECTIVE LIMITS AND DETERMINATION
I.S. EN 12591:2009 BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS
I.S. EN 15940:2016 AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS
I.S. EN 15470:2017 LIQUEFIED PETROLEUM GASES - DETERMINATION OF DISSOLVED RESIDUES - HIGH TEMPERATURE GAS CHROMATOGRAPHIC METHOD
I.S. EN 13924-1:2015 BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 1: HARD PAVING GRADE BITUMENS
I.S. EN 590:2013+A1:2017&LC:2017 AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS
EN 15692:2009 Ethanol as a blending component for petrol - Determination of water content - Karl Fischer potentiometric titration method
EN 15199-4:2015 Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 4: Light fractions of crude oil
I.S. EN 15199-4:2015 PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 4: LIGHT FRACTIONS OF CRUDE OIL
I.S. EN 15490:2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHE
I.S. EN 15489:2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER COULOMETRIC TITRATION METHOD
I.S. EN 14106:2003 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF FREE GLYCEROL CONTENT
I.S. EN 15779:2009 PETROLEUM PRODUCTS AND FAT AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - DETERMINATION OF POLYUNSATURATED (>=4 DOUBLE BONDS) FATTY ACID METHYL ESTERS (PUFA) BY GAS CHROMATOGRAPHY
I.S. EN 14107:2003 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF PHOSPHORUS CONTENT BY INDUCTIVELY COUPLED PLASMA (ICP) EMISSION SPECTROMETRY
I.S. EN 12766-2:2001 PETROLEUM PRODUCTS AND USED OILS - DETERMINATION OF PCBS AND RELATED PRODUCTS - PART 2: CALCULATION OF POLYCHLORINATED BIPHENYL (PCB) CONTENT
UNE-EN 16091:2012 Liquid petroleum products - Middle distillates and fatty acid methyl ester (FAME) fuels and blends - Determination of oxidation stability by rapid small scale oxidation method
UNE-EN 14112:2017 Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of oxidation stability (accelerated oxidation test)
UNE-EN 589:2009 Automotive fuels - LPG - Requirements and test methods
UNE-EN 14078:2014 Liquid petroleum products - Determination of fatty acid methyl ester (FAME) content in middle distillates - Infrared spectrometry method
UNE-EN 15470:2017 Liquefied petroleum gases - Determination of dissolved residues - High temperature Gas chromatographic method
UNE-EN 16144:2012 Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Fixed range injection period, constant volume combustion chamber method
UNE-EN 16761-1:2016 Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel by gas chromatography - Part 1: Method using single column technique
UNE-EN 16900:2017 Fast pyrolysis bio-oils for industrial boilers - Requirements and test methods
DIN EN 14077:2004-03 Petroleum products - Determination of organic halogen content - Oxidative microcoulometric method; German version EN 14077:2003
UNE-EN 15944:2011 Liquid petroleum products - Determination of nickel and vanadium content - Inductively coupled plasma optical emission spectrometry method (ICP OES)
UNE-EN 15751:2014 Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends with diesel fuel - Determination of oxidation stability by accelerated oxidation method
DIN EN 590:2017-10 Automotive fuels - Diesel - Requirements and test methods (includes Amendment :2017)
DIN EN 15199-1:2007-01 Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 1: Middle distillates and lubricating base oils
DIN EN 16715:2015-10 Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection
DIN EN 16091:2012-02 Liquid petroleum products - Middle distillates and fatty acid methyl ester (FAME) fuels and blends - Determination of oxidation stability by rapid small scale oxidation method
DIN EN 15485:2007-11 Ethanol as a blending component for petrol - Determination of sulfur content - Wavelength dispersive X-ray fluorescence spectrometric method
EN 16906:2017 Liquid petroleum products - Determination of the ignition quality of diesel fuels - BASF engine method
EN 14103:2011 Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of ester and linolenic acid methyl ester contents
EN 16709:2015/AC:2016 AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS
EN 16576 : 2014 AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN DIESEL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD
BS EN 12849:2009 Bitumen and bituminous binders. Determination of penetration power of bituminous emulsions
EN 17057:2018 Automotive fuels and fat and oil derivates - Determination of saturated monoglycerides content in Fatty Acid Methyl Esters (FAME) - Method by GC-FID
UNI EN 15751 : 2014 AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD
01/105972 DC : DRAFT JULY 2001 BS EN 14023 - BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR POLYMER MODIFIED BITUMENS
UNI EN 15938 : 2010 AUTOMOTIVE FUELS - ETHANOL BLENDING COMPONENT AND ETHANOL (E85) AUTOMOTIVE FUEL - DETERMINATION OF ELECTRICAL CONDUCTIVITY
UNI EN 15779 : 2013 PETROLEUM PRODUCTS AND FAT AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - DETERMINATION OF POLYUNSATURATED (>=4 DOUBLE BONDS) FATTY ACID METHYL ESTERS (PUFA) BY GAS CHROMATOGRAPHY
UNI EN 12847 : 2009 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF SETTLING TENDENCY OF BITUMINOUS EMULSIONS
BS EN 16734 : 2016 AUTOMOTIVE FUELS - AUTOMOTIVE B10 DIESEL FUEL - REQUIREMENTS AND TEST METHODS
UNI EN 12848 : 2009 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF MIXING STABILITY WITH CEMENT OF BITUMINOUS EMULSIONS
UNI EN 14274 : 2013 AUTOMOTIVE FUELS - ASSESSMENT OF PETROL AND DIESEL QUALITY - FUEL QUALITY MONITORING SYSTEM (FQMS)
UNI EN 15195 : 2015 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER
UNI EN 14078 : 2014 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD
UNI EN 14105 : 2011 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF FREE AND TOTAL GLYCEROL AND MONO-, DI-, TRIGLYCERIDE CONTENTS
BS EN 16997:2017 Liquid petroleum products. Determination of the sulfur content in Ethanol (E85) automotive fuel. Wavelength dispersive X-ray fluorescence spectrometric method
UNI EN 12849 : 2009 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF PENETRATION POWER OF BITUMINOUS EMULSIONS
UNI EN 14865-2 : 2011 RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 2: METHOD TO TEST THE MECHANICAL STABILITY TO COVER VEHICLE SPEEDS UP TO 200 KM/H
BS EN 16934:2017 Automotive fuels and fat and oil derivates, Determination of steryl glycosides in fatty acid methyl esters (FAME). Method by GC-MS with prior purification by SPE
UNI EN 15492 : 2012 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE AND SULPHATE CONTENT - ION CHROMATOGRAPHIC METHOD
UNI EN 14865-1 : 2011 RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 1: METHOD TO TEST THE ABILITY TO LUBRICATE
UNI EN 15691 : 2009 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF DRY RESIDUE (INVOLATILE MATERIAL) - GRAVIMETRIC METHOD
UNI EN 16476 : 2014 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF SODIUM, POTASSIUM, CALCIUM, PHOSPHORUS, COPPER AND ZINC CONTENTS IN DIESEL FUEL - METHOD VIA INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES)
UNI EN 14023 : 2010 BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR POLYMER MODIFIED BITUMENS
UNI EN 15721 : 2013 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND OTHER IMPURITIES - GAS CHROMATOGRAPHIC METHOD
UNI EN 15944 : 2011 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF NICKEL AND VANADIUM CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY METHOD (ICP OES)
UNI EN 16135 : 2012 AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS)
UNI EN 14103 : 2011 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF ESTER AND LINOLENIC ACID METHYL ESTER CONTENTS
BS EN 12662:2014 Liquid petroleum products. Determination of total contamination in middle distillates, diesel fuels and fatty acid methyl esters
IP 486 : 2009 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF MIXING STABILITY WITH CEMENT OF BITUMINOUS EMULSIONS
UNI EN 12662 : 2014 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS
UNI EN 12697-3 : 2013 BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 3: BITUMEN RECOVERY: ROTARY EVAPORATOR
EN 16934:2017 Automotive fuels and fat and oil derivates - Determination of steryl glycosides in fatty acid methyl esters (FAME) - Method by GC-MS with prior purification by SPE
UNI EN 15837 : 2010 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHOSPHORUS, COPPER AND SULFUR CONTENT - DIRECT METHOD BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP-OES)
UNI EN 13924-2 : 2014 BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 2: MULTIGRADE PAVING GRADE BITUMENS
UNI EN 16143 : 2013 PETROLEUM PRODUCTS - DETERMINATION OF CONTENT OF BENZO(A)PYRENE (BAP) AND SELECTED POLYCYCLIC AROMATIC HYDROCARBONS (PAH) IN EXTENDER OILS - PROCEDURE USING DOUBLE LC CLEANING AND GC/MS ANALYSIS
UNI EN 14214 : 2014 LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS
UNI EN 16423 : 2013 LIQUEFIED PETROLEUM GASES - DETERMINATION OF DISSOLVED RESIDUE - GAS CHROMATOGRAPHIC METHOD USING LIQUID, ON-COLUMN INJECTION
UNI EN 16294 : 2013 PETROLEUM PRODUCTS AND FAT AND OIL DERIVATIVES - DETERMINATION OF PHOSPHORUS CONTENT IN FATTY ACID METHYL ESTERS (FAME) - OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES)
BS EN ISO 6245:2002 Methods of test for petroleum and its products. BS 2000-4: Determination of ash
10/30205520 DC : 0 BS EN 16144 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS - FIXED RANGE INJECTION PERIOD, CONSTANT VOLUME COMBUSTION CHAMBER METHOD
UNI EN 12591 : 2009 BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS
S.R. CEN/TR 15745:2015 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF HYDROCARBON TYPES AND OXYGENATES VIA MULTIDIMENSIONAL GAS CHROMATOGRAPHY METHOD - ROUND ROBIN RESEARCH REPORT
I.S. EN 14214:2012 LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS
I.S. EN 14023:2010 BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR POLYMER MODIFIED BITUMENS
I.S. EN 15376:2014 AUTOMOTIVE FUELS - ETHANOL AS A BLENDING COMPONENT FOR PETROL - REQUIREMENTS AND TEST METHODS
I.S. EN 12697-3:2013 BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 3: BITUMEN RECOVERY: ROTARY EVAPORATOR
I.S. CWA 15293:2005 AUTOMOTIVE FUELS - ETHANOL E85 - REQUIREMENTS AND TEST METHODS
I.S. EN 15195:2014 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER
I.S. EN 12847:2009 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF SETTLING TENDENCY OF BITUMINOUS EMULSIONS
I.S. EN 15199-1:2006 PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 1: MIDDLE DISTILLATES AND LUBRICATING BASE OILS
I.S. EN 12848:2009 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF MIXING STABILITY WITH CEMENT OF BITUMINOUS EMULSIONS
I.S. EN 15751:2014 AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD
I.S. EN 589:2008 AUTOMOTIVE FUELS - LPG - REQUIREMENTS AND TEST METHODS
I.S. EN 15692:2009 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER POTENTIOMETRIC TITRATION METHOD
UNE-EN 14214:2013 Liquid petroleum products - Fatty acid methyl esters (FAME) for use in diesel engines and heating applications - Requirements and test methods
UNE-EN 16997:2017 Liquid petroleum products - Determination of the sulfur content in Ethanol (E85) automotive fuel- Wavelength dispersive X-ray fluorescence spectrometric method
UNE-EN 16709:2016 Automotive fuels - High FAME diesel fuel (B20 and B30) - Requirements and test methods
UNE-EN 12697-3:2013 Bituminous mixtures - Test methods for hot mix asphalt - Part 3: Bitumen recovery: Rotary evaporator
UNE-EN 15376:2015 Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methods
UNE-EN 116:2015 Diesel and domestic heating fuels - Determination of cold filter plugging point - Stepwise cooling bath method
UNE-EN 16934:2018 Automotive fuels and fat and oil derivates - Determination of steryl glycosides in fatty acid methyl esters (FAME) - Method by GC-MS with prior purification by SPE
UNE-EN 15199-4:2015 Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 4: Light fractions of crude oil
UNE-EN 16734:2017 Automotive fuels - Automotive B10 diesel fuel - Requirements and test methods
UNE-EN 15940:2016 Automotive fuels - Paraffinic diesel fuel from synthesis or hydrotreatment - Requirements and test methods
UNE-EN 16294:2013 Petroleum products and fat and oil derivatives - Determination of phosphorus content in fatty acid methyl esters (FAME) - Optical emission spectral analysis with inductively coupled plasma (ICP OES)
UNE-EN 15721:2014 Ethanol as a blending component for petrol - Determination of higher alcohols, methanol and other impurities - Gas chromatographic method
UNE-EN 16136:2015 Automotive fuels - Determination of manganese and iron content in unleaded petrol - Inductively coupled plasma optical emission spectrometry (ICP OES) method
UNE-EN 16270:2015 Automotive fuels - Determination of high-boiling components including fatty acid methyl esters in petrol and ethanol (E85) automotive fuel - Gas chromatographic method
UNE-EN 16761-2:2016 Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel by gas chromatography - Part 2: Method using heart cut technique
UNE-EN 16329:2013 Diesel and domestic heating fuels - Determination of cold filter plugging point - Linear cooling bath method
UNE-EN 13924-1:2016 Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 1: Hard paving grade bitumens
UNE-EN 16896:2017 Petroleum products and related products - Determination of kinematic viscosity - Method by Stabinger type viscosimeter
UNE-EN 15938:2011 Automotive fuels - Ethanol blending component and ethanol (E85) automotive fuel - Determination of electrical conductivity
DIN EN 14078:2014-09 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD
EN 16294:2012 Petroleum products and fat and oil derivatives - Determination of phosphorus content in fatty acid methyl esters (FAME) - Optical emission spectral analysis with inductively coupled plasma (ICP OES)
EN 16144:2012 Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Fixed range injection period, constant volume combustion chamber method
EN 15489:2007 Ethanol as a blending component for petrol - Determination of water content - Karl Fischer coulometric titration method
EN 14865-1:2009+A1:2010 Railway applications - Axlebox lubricating greases - Part 1: Method to test the ability to lubricate
BS EN 14111:2003 Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of iodine value
EN 1601:2017 Liquid petroleum products - Determination of organic oxygenate compounds and total organically bound oxygen content in unleaded petrol - Method by gas chromatography (O-FID)
EN 15199-2:2006 Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 2: Heavy distillates and residual fuels
EN 16997:2017 Liquid petroleum products - Determination of the sulfur content in Ethanol (E85) automotive fuel- Wavelength dispersive X-ray fluorescence spectrometric method
EN 14213:2003/AC:2003 HEATING FUELS - FATTY ACID METHYL ESTERS (FAME) - REQUIREMENTS AND TEST METHODS
BS 2000-508(2013) : 2013 COR 2015 AUTOMOTIVE FUELS - ASSESSMENT OF PETROL AND DIESEL QUALITY - FUEL QUALITY MONITORING SYSTEM (FQMS)
EN 16270:2015 Automotive fuels - Determination of high-boiling components including fatty acid methyl esters in petrol and ethanol (E85) automotive fuel - Gas chromatographic method
IP 309 : 2016 DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - STEPWISE COOLING BATH METHOD
EN 15488:2007 Ethanol as a blending component for petrol - Determination of copper content - Graphite furnace atomic absorption spectrometric method
BS EN 12848:2009 Bitumen and bituminous binders. Determination of mixing stability with cement of bituminous emulsions
EN 14078:2014 Liquid petroleum products - Determination of fatty acid methyl ester (FAME) content in middle distillates - Infrared spectrometry method
EN 15199-3:2008 Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 3: Crude oil
EN 14108:2003 Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of sodium content by atomic absorption spectrometry
EN 15779:2009+A1:2013 Petroleum products and fat and oil derivates - Fatty acid methyl esters (FAME) for diesel engines - Determination of polyunsaturated (≥4 double bonds) fatty acid methyl esters (PUFA) by gas chromatography
EN 13924:2006/AC:2006 BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR HARD PAVING GRADE BITUMENS
EN 15490:2007 Ethanol as a blending component for petrol - Determination of pHe
EN 15486:2007 Ethanol as a blending component for petrol - Determination of sulfur content - Ultraviolet fluorescence method
EN 15470:2017 Liquefied petroleum gases - Determination of dissolved residues - High temperature Gas chromatographic method
EN 14517:2004 Liquid petroleum products - Determination of hydrocarbon types and oxygenates in petrol - Multidimensional gas chromatography method
EN 16423:2013 Liquefied petroleum gases - Determination of dissolved residue - Gas chromatographic method using liquid, on-column injection
EN 14112:2016 Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of oxidation stability (accelerated oxidation test)
EN 14832:2005 Petroleum and related products - Determination of the oxidation stability and corrosivity of fire-resistant phosphate ester fluids
EN 590:2013 Automotive fuels - Diesel - Requirements and test methods
EN 14109:2003 Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of potassium content by atomic absorption spectrometry
BS 2000-574(2014) : 2014 AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD
IP 578 : 2015 PETROLEUM PRODUCTS AND FAT AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - DETERMINATION OF POLYUNSATURATED (>= 4 DOUBLE BONDS) FATTY ACID METHYL ESTERS (PUFA) BY GAS CHROMATOGRAPHY
EN 16329:2013 Diesel and domestic heating fuels - Determination of cold filter plugging point - Linear cooling bath method
EN 15487:2007 Ethanol as a blending component for petrol - Determination of phosphorus content - Ammonium molybdate spectrometric method
IP 487 : 2009 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF PENETRATION POWER OF BITUMINOUS EMULSIONS
IP 606 : 2016 AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS INCLUDING FATTY ACID METHYL ESTERS IN PETROL AND ETHANOL (E85) AUTOMOTIVE FUEL - GAS CHROMATOGRAPHIC METHOD
EN 15376:2014 Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methods
UNI EN 589 : 2013 AUTOMOTIVE FUELS - LPG - REQUIREMENTS AND TEST METHODS
EN 15471:2017 Liquefied petroleum gases - Determination of dissolved residues - High-temperature gravimetric method
EN 14023:2010 Bitumen and bituminous binders - Specification framework for polymer modified bitumens
EN 15199-1:2006 Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 1: Middle distillates and lubricating base oils
EN 15721:2013 Ethanol as a blending component for petrol - Determination of higher alcohols, methanol and other impurities - Gas chromatographic method
IP 608 : 2015 DETERMINATION OF MERCURY IN BURNER FUELS DERIVED FROM WASTE MINERAL OILS - WAVELENGTH DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY METHOD
EN 15751:2014 Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends with diesel fuel - Determination of oxidation stability by accelerated oxidation method
EN 16568:2014 Automotive fuels - Blends of Fatty acid methyl ester (FAME) with diesel fuel - Determination of oxidation stability by rapidly accelerated oxidation method at 120 °C
BS EN 16329:2013 Diesel and domestic heating fuels. Determination of cold filter plugging point. Linear cooling bath method
EN 15484:2007 Ethanol as a blending component for petrol - Determination of inorganic chloride - Potentiometric method
EN 15195:2014 Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber
EN 16761-1:2015 Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel by gas chromatography - Part 1: Method using single column technique
EN 14104:2003 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF ACID VALUE
EN 14274:2013/AC:2013 AUTOMOTIVE FUELS - ASSESSMENT OF PETROL AND DIESEL QUALITY - FUEL QUALITY MONITORING SYSTEM (FQMS)
EN 13924-1:2015 Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 1: Hard paving grade bitumens
EN 15938:2010 Automotive fuels - Ethanol blending component and ethanol (E85) automotive fuel - Determination of electrical conductivity
EN 15691:2009 Ethanol as a blending component for petrol - Determination of dry residue (involatile material) - Gravimetric method
EN 589:2008+A1:2012 Automotive fuels - LPG - Requirements and test methods
EN 16136:2015 Automotive fuels - Determination of manganese and iron content in unleaded petrol - Inductively coupled plasma optical emission spectrometry (ICP OES) method
EN 16143:2013 Petroleum products - Determination of content of Benzo(a)pyrene (BaP) and selected polycyclic aromatic hydrocarbons (PAH) in extender oils - Procedure using double LC cleaning and GC/MS analysis
EN 14111:2003 Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of iodine value
EN 228:2012+A1:2017 Automotive fuels - Unleaded petrol - Requirements and test methods
BS EN 15944:2010 Liquid petroleum products. Determination of nickel and vanadium content. Inductively coupled plasma optical emission spectrometry method (ICP OES)
EN 16091:2011 Liquid petroleum products - Middle distillates and fatty acid methyl ester (FAME) fuels and blends - Determination of oxidation stability by rapid small scale oxidation method
EN 15944:2010 Liquid petroleum products - Determination of nickel and vanadium content - Inductively coupled plasma optical emission spectrometry method (ICP OES)
BS EN 16135:2011 Automotive fuels. Determination of manganese content in unleaded petrol. Flame atomic absorption spectrometric method (FAAS)
BS EN 16568:2014 Automotive fuels. Blends of Fatty acid methyl ester (FAME) with diesel fuel. Determination of oxidation stability by rapidly accelerated oxidation method at 120 °C
BS EN 16900:2017 Fast pyrolysis bio-oils for industrial boilers. Requirements and test methods
EN 14077:2003 Petroleum products - Determination of organic halogen content - Oxidative microcoulometric method
EN 15837:2009 Ethanol as a blending component for petrol - Determination of phosphorus, copper and sulfur content - Direct method by inductively coupled plasma optical emission spectrometry (ICP OES)
BS 2000-456(2000) : 2000 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF POTASSIUM IN GASOLINE - ATOMIC ABSORPTION SPECTROMETRY (AAS) METHOD
IP 508 : 2016 AUTOMOTIVE FUELS - ASSESSMENT OF PETROL AND DIESEL QUALITY - FUEL QUALITY MONITORING SYSTEM (FQMS)
EN 14106:2003 Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of free glycerol content
EN 15485:2007 Ethanol as a blending component for petrol - Determination of sulfur content - Wavelength dispersive X-ray fluorescence spectrometric method
IP 485 : 2009 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF SETTLING TENDENCY OF BITUMINOUS EMULSIONS
IP 498 : 2015 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER
EN 14865-2:2006+A2:2010 Railway applications - Axlebox lubricating greases - Part 2: Method to test the mechanical stability to cover vehicle speeds up to 200 km/h
BS 2000-129(2003) : 2003 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 129: DETERMINATION OF BROMINE NUMBER - COLOUR INDICATOR TITRATION METHOD
EN 16715:2015 Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection
EN 15492:2012 Ethanol as a blending component for petrol - Determination of inorganic chloride and sulfate content - Ion chromatographic method
EN 16734:2016 Automotive fuels - Automotive B10 diesel fuel - Requirements and test methods
EN 16761-2 : 2015 AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 2: METHOD USING HEART CUT TECHNIQUE
EN 16135:2011 Automotive fuels - Determination of manganese content in unleaded petrol - Flame atomic absorption spectrometric method (FAAS)
EI HM 68 : 2011 PROCEDURES FOR BULK LIQUID FATTY ACID METHYL ESTERS (FAME) AND BLENDED BIODIESEL CARGO INSPECTIONS
IP 615 : 2016 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS - IGNITION DELAY AND COMBUSTION DELAY DETERMINATION USING A CONSTANT VOLUME COMBUSTION CHAMBER WITH DIRECT FUEL INJECTION
EN ISO 6245:2002 Petroleum products - Determination of ash (ISO 6245:2001)
EN 13924-2:2014 Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 2: Multigrade paving grade bitumens
EN 14107:2003 Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of phosphorus content by inductively coupled plasma (ICP) emission spectrometry
EN 14110:2003 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF METHANOL CONTENT
EN 16900:2017 Fast pyrolysis bio-oils for industrial boilers - Requirements and test methods
EN 16476:2014 Liquid petroleum products - Determination of Sodium, Potassium, Calcium, Phosphorus, Copper and Zinc contents in diesel fuel - Method via Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES)
EN 14833:2005 Petroleum and related products - Determination of the hydrolytic stability of fire-resistant phosphate ester fluids
I.S. EN 15199-3:2008 PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 3: CRUDE OIL
I.S. EN 14103:2011 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF ESTER AND LINOLENIC ACID METHYL ESTER CONTENTS
S.R. CEN TS 15293:2011 AUTOMOTIVE FUELS - ETHANOL (E85) AUTOMOTIVE FUEL - REQUIREMENTS AND TEST METHODS
S.R. CEN/TS 15940:2012 AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS
I.S. EN 13924:2006 BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR HARD PAVING GRADE BITUMENS
I.S. EN 15721:2013 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND OTHER IMPURITIES - GAS CHROMATOGRAPHIC METHOD
S.R. CWA 15940:2009 AUTOMOTIVE FUELS - PARAFFINIC DIESEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS
I.S. EN 15471:2017 LIQUEFIED PETROLEUM GASES - DETERMINATION OF DISSOLVED RESIDUES - HIGH-TEMPERATURE GRAVIMETRIC METHOD
I.S. EN 16734:2016 AUTOMOTIVE FUELS - AUTOMOTIVE B10 DIESEL FUEL - REQUIREMENTS AND TEST METHODS
I.S. EN 1601:2017 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT IN UNLEADED PETROL - METHOD BY GAS CHROMATOGRAPHY (O-FID)
I.S. EN 15488:2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF COPPER CONTENT - GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRIC METHOD
I.S. EN 15553:2007 PETROLEUM PRODUCTS AND RELATED MATERIALS - DETERMINATION OF HYDROCARBON TYPES - FLUORESCENT INDICATOR ADSORPTION METHOD
I.S. EN 14077:2004 PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC HALOGEN CONTENT - OXIDATIVE MICROCOULOMETRIC METHOD
UNI EN 15692 : 2009 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER POTENTIOMETRIC TITRATION METHOD
UNE-EN 15471:2017 Liquefied petroleum gases - Determination of dissolved residues - High-temperature gravimetric method
UNE-EN 12916:2016 Petroleum products - Determination of aromatic hydrocarbon types in middle distillates - High performance liquid chromatography method with refractive index detection
UNE-EN 590:2014 Automotive fuels - Diesel - Requirements and test methods
DIN EN 13924-2:2014-07 BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 2: MULTIGRADE PAVING GRADE BITUMENS
BS EN 15470:2017 Liquefied petroleum gases. Determination of dissolved residues. High temperature Gas chromatographic method
EN 12766-3:2004/AC:2007 PETROLEUM PRODUCTS AND USED OILS - DETERMINATION OF PCBS AND RELATED PRODUCTS - PART 3: DETERMINATION AND QUANTIFICATION OF POLYCHLORINATED TERPHENYLS (PCT) AND POLYCHLORINATED BENZYL TOLUENES (PCBT) CONTENT BY GAS CHROMATOGRAPHY (GC) USING AN ELECTRON CAPTURE DETECTOR (ECD)
DIN EN 16896:2015-09 (Draft) PETROLEUM PRODUCTS AND RELATED PRODUCTS - DETERMINATION OF KINEMATIC VISCOSITY - METHOD BY STABINGER TYPE VISCOSIMETER
BS EN 15471:2017 Liquefied petroleum gases. Determination of dissolved residues. High-temperature gravimetric method
EN 12591:2009 Bitumen and bituminous binders - Specifications for paving grade bitumens
DIN EN 14832:2005-09 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE OXIDATION STABILITY AND CORROSIVITY OF FIRE-RESISTANT PHOSPHATE ESTER FLUIDS
EN 12847:2009 Bitumen and bituminous binders - Determination of settling tendency of bituminous emulsions
CEN/TS 15293:2011 Automotive fuels - Ethanol (E85) automotive fuel - Requirements and test methods
DIN EN 16136:2015-04 AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN UNLEADED PETROL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD
BS EN 13075-1:2016 Bitumen and bituminous binders. Determination of breaking behaviour Determination of breaking value of cationic bituminous emulsions, mineral filler method
DIN EN 16143:2013-05 PETROLEUM PRODUCTS - DETERMINATION OF CONTENT OF BENZO(A)PYRENE (BAP) AND SELECTED POLYCYCLIC AROMATIC HYDROCARBONS (PAH) IN EXTENDER OILS - PROCEDURE USING DOUBLE LC CLEANING AND GC/MS ANALYSIS
DIN EN 16270:2015-08 AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS INCLUDING FATTY ACID METHYL ESTERS IN PETROL AND ETHANOL (E85) AUTOMOTIVE FUEL - GAS CHROMATOGRAPHIC METHOD
DIN EN 16761-1:2016-02 AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 1: METHOD USING SINGLE COLUMN TECHNIQUE
BS EN 15692:2009 Ethanol as a blending component for petrol. Determination of water content. Karl Fischer potentiometric titration method
DIN EN 1601:2016-06 (Draft) LIQUID PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT IN UNLEADED PETROL - METHOD BY GAS CHROMATOGRAPHY (O-FID)
BS EN 15553:2007 Petroleum products and related materials. Determination of hydrocarbon types. Fluorescent indicator adsorption method
DIN EN 15471:2016-01 (Draft) LIQUEFIED PETROLEUM GASES - DETERMINATION OF DISSOLVED RESIDUES - HIGH-TEMPERATURE GRAVIMETRIC METHOD
DIN EN 14107:2003-10 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF PHOSPHORUS CONTENT BY INDUCTIVELY COUPLED PLASMA (ICP) EMISSION SPECTROMETRY
DIN EN 15471:2017-09 LIQUEFIED PETROLEUM GASES - DETERMINATION OF DISSOLVED RESIDUES - HIGH-TEMPERATURE GRAVIMETRIC METHOD
EN 15553:2007 Petroleum products and related materials - Determination of hydrocarbon types - Fluorescent indicator adsorption method
DIN EN 15721:2013-12 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND OTHER IMPURITIES - GAS CHROMATOGRAPHIC METHOD
DIN EN 16576:2015-02 AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN DIESEL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD
BS EN 14103:2011 Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of ester and linolenic acid methyl ester contents
DIN EN 13924-1:2016-02 BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 1: HARD PAVING GRADE BITUMENS
BS EN 15199-4:2015 Petroleum products. Determination of boiling range distribution by gas chromatography method Light fractions of crude oil
BS EN 16091:2011 Liquid petroleum products. Middle distillates and fatty acid methyl ester (FAME) fuels and blends. Determination of oxidation stability by rapid small scale oxidation method
BS EN 14110:2003 Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of methanol content
CEN/TR 16389:2017 Automotive fuels - Paraffinic diesel fuel and blends with FAME - Background to the parameters required and their respective limits and determination
DIN EN 16997:2016-05 (Draft) LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE SULFUR CONTENT IN ETHANOL (E85) AUTOMOTIVE FUEL - WAVELENGTH DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRIC METHOD
DIN EN 16896:2017-02 PETROLEUM PRODUCTS AND RELATED PRODUCTS - DETERMINATION OF KINEMATIC VISCOSITY - METHOD BY STABINGER TYPE VISCOSIMETER
CEN/TR 16514 : 2013 AUTOMOTIVE FUELS - UNLEADED PETROL CONTAINING MORE THAN 3,7% (M/M) OXYGEN - ROADMAP, TEST METHODS, AND REQUIREMENTS FOR E10+ PETROL
CEN/TS 15940 : 2012 AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS
EN 12849:2009 Bitumen and bituminous binders - Determination of penetration power of bituminous emulsions
DIN EN 12849:2009-07 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF PENETRATION POWER OF BITUMINOUS EMULSIONS
BS EN 14105:2011 Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of free and total glycerol and mono-, di-, triglyceride contents
EN 15491:2007 Ethanol as a blending component for petrol - Determination of total acidity - Colour indicator titration method
BS EN 15491:2007 Ethanol as a blending component for petrol. Determination of total acidity. Colour indicator titration method
CEN/TR 16366:2012 Liquid petroleum products - Middle distillates and fatty acid methyl ester (FAME) fuels and blends - Round Robin report on applicability of Rapid Small Scale Oxidation Test method
DIN EN 14110:2003-10 FAT AND OIL DERIVATIVES - FATTY ACID METHYLESTERS (FAME) - DETERMINATION OF METHANOL CONTENT
DIN EN 12847:2009-07 Bitumen and bituminous binders - Determination of settling tendency of bituminous emulsions
BS EN 14112:2003 Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of oxidation stability (accelerated oxidation test)
DIN EN 16568:2015-03 AUTOMOTIVE FUELS - BLENDS OF FATTY ACID METHYL ESTER (FAME) WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY RAPIDLY ACCELERATED OXIDATION METHOD AT 120 DEGREES C
DIN EN 15195:2015-02 Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber
DIN EN 16906:2015-09 (Draft) LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - BASF ENGINE METHOD
DIN EN ISO 6245:2003-01 PETROLEUM PRODUCTS - DETERMINATION OF ASH
DIN EN 15691:2009-07 Ethanol as a blending component for petrol - Determination of dry residue (involatile material) - Gravimetric method
DIN 51619:2004-02 TESTING OF MINERAL OIL HYDROCARBONS - DETERMINATION OF THE COMPOSITION OF LIQUID PETROLEUM GASES - GAS CHROMATOGRAPHIC ANALYSIS UNDER SPECIAL CONSIDERATION OF 1,3-BUTADIENE WITH MASS FRACTIONS <= 0,1 % (M/M)
BS EN 15199-3:2008 Petroleum products. Determination of boiling range distribution by gas chromatography method Crude oil
CEN/TR 15745:2015 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF HYDROCARBON TYPES AND OXYGENATES VIA MULTIDIMENSIONAL GAS CHROMATOGRAPHY METHOD - ROUND ROBIN RESEARCH REPORT
UNE-EN 228:2013 Automotive fuels - Unleaded petrol - Requirements and test methods
UNE-EN 15779:2010 Petroleum products and fat and oil derivates - Fatty acid methyl esters (FAME) for diesel engines - Determination of polyunsaturated (>= 4 double bonds) fatty acid methyl esters (PUFA) by gas chromatography
UNE-EN 14865-1:2010 Railway Applications - Axlebox lubricating greases - Part 1: Method to test the ability to lubricate
BS EN 12846:2002 Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of efflux time of bitumen emulsions by the efflux viscometer method

ISO 3534-2:2006 Statistics Vocabulary and symbols Part 2: Applied statistics
ISO 5725-2:1994 Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.