I.S. EN 598:2007
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS
Hardcopy , PDF
English
30-10-2007
11-03-2022
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Technical requirements
4.1 General
4.2 Dimensional requirements
4.3 Material characteristics
4.4 Coatings and linings for pipes
4.5 Coatings for fittings and accessories
4.6 Marking of pipes and fittings
4.7 Leak tightness
5 Performance requirements
5.1 General
5.2 Longitudinal bending of pipes
5.3 Diametral stiffness of pipes
5.4 Leak tightness of components for gravity pipelines
5.5 Leak tightness of flexible joints
5.6 Flanged joints
5.7 Pipes with screwed or welded flanges
5.8 Chemical resistance to effluents
5.9 Abrasion resistance
5.10 Strength of the cement mortar lining
6 Test methods
6.1 Pipe dimensions
6.2 Straightness of pipes
6.3 Tensile testing
6.4 Brinell hardness
6.5 Works leak tightness test for pipes and fittings for
positive pressure pipelines
6.6 Works leak tightness test for pipes and fittings for
negative pressure pipelines
6.7 Zinc mass
6.8 Thickness of paint coatings
6.9 Thickness of cement mortar lining
7 Performance test methods
7.1 Compressive strength of the cement mortar lining
7.2 Longitudinal bending of pipes
7.3 Diametral stiffness of pipes
7.4 Leak tightness of components for gravity pipelines
7.5 Leak tightness of flexible joints to positive internal
pressure
7.6 Leak tightness of flexible joints to negative internal
pressure
7.7 Leak tightness of flexible push-in joints to positive
external pressure
7.8 Leak tightness of flexible joints to dynamic internal
pressure
7.9 Chemical resistance to effluents
7.10 Abrasion resistance
8 Tables of dimensions
8.1 Socket and spigot pipes
8.2 Fittings for gravity sewers
8.3 Fittings for pressure sewers and vacuum sewers
9 Evaluation of conformity
9.1 General
9.2 Initial type testing
9.3 Factory production control (FPC)
Annex A (normative) Allowable pressures for pressure sewers
Annex B (informative) Alternative coatings and field of use in
relation to characteristics of soils
Annex C (informative) Field of use in relation to characteristics
of effluents
Annex D (informative) Calculation method for buried pipelines,
permissible heights of cover
Annex E (informative) Resistance to jet cleaning and to root
penetration
Annex ZA (informative) Clauses of this European Standard
addressing essential requirements or other
provisions of EU Directives
Bibliography
Describes the requirements and associated test methods applicable to ductile iron pipes, fittings, accessories and their joints for the construction of drains and sewers outside buildings.
| DevelopmentNote |
2007 Edition Re-issued in August 2009 & incorporates AMD 1 2009. (08/2009)
|
| DocumentType |
Standard
|
| Pages |
68
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NF EN 598 : 2007 + A1 2009 | Identical |
| BS EN 598 : 2007 | Identical |
| NS EN 598 : 2007 + A1 2009 | Identical |
| EN 598:2007+A1:2009 | Identical |
| NBN EN 598 : 2008 + A1 2009 | Identical |
| NEN EN 598 : 2007 + A1 2009 | Identical |
| DIN EN 598:2009-10 | Identical |
| EN 598:2007 | Equivalent |
| UNE-EN 598:2008 | Identical |
A newer version of this standard is available.
View Current Edition
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.