• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

IEC 60079-0:2011

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Explosive atmospheres - Part 0: Equipment - General requirements
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

31-12-2021

Published date

22-06-2011

IEC 60079-0:2011 specifies the general requirements for construction, testing and marking of electrical equipment and Ex Components intended for use in explosive atmospheres. Electrical equipment complying with this standard is intended for use in hazardous areas in which explosive gas atmospheres, caused by mixtures of air and gases, vapours or mists, exist under normal atmospheric conditions. The standard atmospheric conditions (relating to the explosion characteristics of the atmosphere) under which it may be assumed that electrical equipment can be operated are:
- temperature -20 °C to +60 °C;
- pressure 80 kPa (0,8 bar) to 110 kPa (1,1 bar); and
- air with normal oxygen content, typically 21 % v/v.
This standard and other standards supplementing this standard specify additional test requirements for equipment operating outside the standard temperature range, but further additional consideration and additional testing may be required for equipment operating outside the standard atmospheric pressure range and standard oxygen content, particularly with respect to types of protection that depend on quenching of a flame such as 'flameproof enclosure "d"' (IEC 60079-1) or limitation of energy, 'intrinsic safety "i"' (IEC 60079-11). This sixth edition cancels and replaces the fifth edition, published in 2007, and constitutes a full technical revision with numerous updates.
IEC 60079-0:2011 is also available as IEC Standards+ 60079-0:2011 which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
The contents of the corrigenda of November 2012 and December 2013, and the interpretation sheets of November 2013, October 2014, June 2018 and April 2019 have been included in this copy.

Committee
TC 31
DocumentType
Standard
Pages
214
PublisherName
International Electrotechnical Committee
Status
Superseded
SupersededBy
Supersedes

IEEE 303-2004 IEEE Recommended Practice for Auxiliary Devices for Rotating Electrical Machines in Class I, Division 2 and Zone 2 Locations
PREN ISO 6416 : DRAFT 2015 HYDROMETRY - MEASUREMENT OF DISCHARGE BY THE ULTRASONIC TRANSIT TIME (TIME OF FLIGHT) METHOD (ISO/DIS 6416:2015)
EN 13175:2014 LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS
11/30246684 DC : 0 BS EN 1953 - ATOMISING AND SPRAYING EQUIPMENT FOR COATING MATERIALS - SAFETY REQUIREMENTS
14/30301257 DC : 0 BS EN 13160-3 - LEAK DETECTION SYSTEMS - PART 3: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR LIQUID SYSTEMS FOR TANKS
UNE-EN 60079-17:2014 Explosive atmospheres - Part 17: Electrical installations inspection and maintenance
BS IEC 60079-19:1993 Electrical apparatus for explosive gas atmospheres Repair and overhaul for apparatus used in explosive atmospheres (other than mines or explosives)
DD CLC/TS 50131-7:2010 Alarm systems. Intrusion and hold-up systems Application guidelines
09/30182356 DC : 0 BS EN 12581:2005/A1 - COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
15/30277841 DC : 0 BS EN 62784 ED 1.0 - PARTICULAR REQUIREMENTS FOR VACUUM CLEANERS AND DUST EXTRACTORS PROVIDING EQUIPMENT PROTECTION LEVEL DC FOR THE COLLECTION OF COMBUSTIBLE DUSTS
10/30219414 DC : 0 BS EN 13617-4 - PETROL FILLING STATIONS - PART 4: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SWIVELS FOR USE ON METERING PUMPS AND DISPENSERS
PREN 50050-1 : DRAFT 2011 ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 1: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIALS
BS EN 60079-5:2015 Explosive atmospheres Equipment protection by powder filling \'q\'
CEI EN 61310-2 : 2008 SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 2: REQUIREMENTS FOR MARKING
DIN EN 14591-4:2007-09 Explosion prevention and protection in underground mines - Protective systems - Part 4: Automatic extinguishing systems for road headers
14/30316829 DC : DRAFT NOV 2014 BS EN 62952-1 ED. 1.0 - POWER SOURCES FOR A WIRELESS COMMUNICATION DEVICE - PART 1: GENERAL REQUIREMENTS OF POWER SOURCES
12/30261858 DC : 0 BS EN 60079-31/ED 2 - EXPLOSIVE ATMOSPHERES - PART 31: EQUIPMENT DUST IGNITION PROTECTION BY ENCLOSURE 'T'
DIN EN ISO 13297:2015-04 SMALL CRAFT - ELECTRICAL SYSTEMS - ALTERNATING CURRENT INSTALLATIONS (ISO 13297:2014)
BS ISO 16110-1:2007 Hydrogen generators using fuel processing technologies Safety
14/30316021 DC : 0 BS EN 62657-1 - INDUSTRIAL COMMUNICATION NETWORKS - WIRELESS COMMUNICATION NETWORKS - PART 1: WIRELESS COMMUNICATION REQUIREMENTS AND SPECTRUM CONSIDERATIONS
BS EN 16657 : 2016 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TRANSPORT TANK EQUIPMENT FOR OVERFILL PREVENTION DEVICES FOR STATIC TANKS
BS EN ISO 80079-37:2016 Explosive atmospheres Non-electrical equipment for explosive atmospheres. Non-electrical type of protection constructional safety \'\'c\'\', control of ignition sources \'\'b\'\', liquid immersion \'\'k\'\'
06/30153363 DC : DRAFT JULY 2006 BS IEC 60079-31 - EXPLOSIVE ATMOSPHERES - PART 31 - EQUIPMENT - PROTECTION BY ENCLOSURE "TD"
UNI EN 1474-1 : 2009 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
NF EN 60079-13 : 2011 EXPLOSIVE ATMOSPHERES - PART 13: EQUIPMENT - PROTECTED BY PRESSURIZED ROOMS "P"
I.S. EN 60079-35-1:2011 EXPLOSIVE ATMOSPHERES - PART 35-1: CAPLIGHTS FOR USE IN MINES SUSCEPTIBLE TO FIREDAMP - GENERAL REQUIREMENTS - CONSTRUCTION AND TESTING IN RELATION TO THE RISK OF EXPLOSION
05/30128036 DC : DRAFT JAN 2005 IEC 60079-5 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 5: POWDER FILLING 'Q'
EN 61987-16:2017 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 16: Lists of properties (LOPs) for density measuring equipment for electronic data exchange
03/313421 DC : DRAFT NOV 2003 IEC 60079-28 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 28: RISK OF IGNITION BY RADIATION OF EXPLOSIVE ATMOSPHERES OF GAS, VAPOUR OR MIST FROM OPTICAL RADIATION EQUIPMENT AND TRANSMISSION SYSTEMS
10/30210537 DC : DRAFT JUNE 2010 BS ISO 18132-1 - REFRIGERATED HYDROCARBON FLUIDS AND NON-PETROLEUM BASED LIQUEFIED GASEOUS FUELS - GENERAL REQUIREMENTS FOR AUTOMATIC TANK GAUGES - PART 1: AUTOMATIC TANK GAUGES FOR LIQUEFIED NATURAL GAS ON BOARD MARINE CARRIERS AND FLOATING STORAGE
ISO 12643-1:2009 Graphic technology — Safety requirements for graphic technology equipment and systems — Part 1: General requirements
UNE-EN 50050-2:2014 Electrostatic hand-held spraying equipment - Safety requirements - Part 2: Hand-held spraying equipment for ignitable coating powder
BS ISO 12643-1:2009 Graphic technology. Safety requirements for graphic technology equipment and systems General requirements
12/30262935 DC : 0 BS EN 15339-4 - THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 4: GAS AND LIQUID FUEL SUPPLY
CSA E79.18 : 1995 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ENCAPSULATION "M"
11/30248849 DC : 0 BS EN 50050-3:2011 - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 3: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE FLOCK
S.R. CLC/TR 60079-33:2015 EXPLOSIVE ATMOSPHERES - PART 33: EQUIPMENT PROTECTION BY SPECIAL PROTECTION 'S'
DIN EN 14593-1:2005-07 RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE BREATHING APPARATUS WITH DEMAND VALVE - PART 1: APPARATUS WITH A FULL FACE MASK - REQUIREMENTS, TESTING, MARKING
13/30279579 DC : 0 BS ISO 19372 - MICROTURBINES APPLICATIONS - SAFETY
12/30243081 DC : 0 BS EN 1034-17 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES
GOST R 52350.1 : 2005 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 1: FLAMEPROOF ENCLOSURES "D"
13/30271404 DC : DRAFT DEC 2013 BS ISO 16923 - NATURAL GAS FUELLING STATIONS - CNG STATIONS FOR FUELLING VEHICLES
PD CLC/TR 50427:2004 Assessment of inadvertent ignition of flammable atmospheres by radio-frequency radiation. Guide
09/30198043 DC : 0 BS EN 1127-1 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
16/30344890 DC : 0 BS ISO 19891-1 - SHIPS AND MARINE TECHNOLOGY - SPECIFICATIONS FOR GAS DETECTORS INTENDED FOR USE ON BOARD SHIPS - PART 1: PORTABLE GAS DETECTORS FOR ATMOSPHERE TESTING OF ENCLOSED SPACES
BS ISO 18647:2017 Petroleum and natural gas industries. Modular drilling rigs for offshore fixed platforms
UNI EN 13237 : 2012 POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
07/30163854 DC : 0 BS EN 60079-29-4 - EXPLOSIVE ATMOSPHERES - PART 29-4: GAS DETECTORS - OPEN PATH APPARATUS GENERAL REQUIREMENTS AND TEST METHODS
BS EN 60695-1-10:2017 Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. General guidelines
13/30273033 DC : 0 BS EN 1012-3 - COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS
UNE-EN 60079-26:2015 Explosive atmospheres - Part 26: Equipment with Equipment Protection Level (EPL) Ga
UNE-EN 60079-1:2015 Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
NF EN 16191 : 2014 TUNNELLING MACHINERY - SAFETY REQUIREMENTS
IEC 60335-2-69 REDLINE : 5.0 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-69: PARTICULAR REQUIREMENTS FOR WET AND DRY VACUUM CLEANERS, INCLUDING POWER BRUSH, FOR COMMERCIAL USE
12/30243465 DC : 0 BS ISO/IEC 80079-38 - EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
I.S. EN ISO 8846:2017 SMALL CRAFT - ELECTRICAL DEVICES - PROTECTION AGAINST IGNITION OF SURROUNDING FLAMMABLE GASES (ISO 8846:1990)
12/30267444 DC : 0 BS EN 60079-5 ED 4.0 - EXPLOSIVE ATMOSPHERES - PART 5: EQUIPMENT PROTECTION BY POWDER FILLING 'Q'
BS ISO 19891-1:2017 Ships and marine technology. Specifications for gas detectors intended for use on board ships Portable gas detectors for atmosphere testing of enclosed spaces
08/30191166 DC : DRAFT OCT 2008 BS EN 60079-25 - EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE SYSTEMS
BS EN 61241-17:2005 Electrical apparatus for use in the presence of combustible dust Inspection and maintenance of electrical installations in hazardous areas (other than mines)
EN 60079-30-1:2017 Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements
CEI EN 60079-27 : 2010 EXPLOSIVE ATMOSPHERES - PART 27: FIELDBUS INTRINSICALLY SAFE CONCEPT (FISCO)
04/30117249 DC : DRAFT JUL 2004 IEC 60079-2 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 2: PRESSURIZED ENCLOSURES 'P'
06/30149825 DC : DRAFT MAY 2006 EN 60079-25 - EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE SYSTEMS
15/30332015 DC : 0 BS EN 61987-16 - INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 16: LIST OF PROPERTIES (LOP) FOR DENSITY MEASURING EQUIPMENT FOR ELECTRONIC DATA EXCHANGE
DIN EN ISO/IEC 80079-34:2012-03 EXPLOSIVE ATMOSPHERES - PART 34: APPLICATION OF QUALITY SYSTEMS FOR EQUIPMENT MANUFACTURE (ISO/IEC 80079-34:2011)
BS 7489:1991 Specification for protection of electrical devices used on small craft to prevent ignition of surrounding flammable gases
03/313440 DC : DRAFT DEC 2003 IEC 60079-11 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 11 - INTRINSIC SAFETY 'I'
01/120061 DC : DRAFT JAN 2001 ISO 12648 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR PRINTING PRESS SYSTEMS
11/30239006 DC : 0 BS EN 13237 - POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
12/30258880 DC : 0 BS EN 60825-1 ED.3 - SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS
05/30128501 DC : DRAFT JAN 2005 IEC 60079-6 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 6: OIL-IMMERSION 'O'
BS ISO 6826:1997 Reciprocating internal combustion engines. Fire protection
BS EN 62282-3-100:2012 Fuel cell technologies Stationary fuel cell power systems. Safety
12/30270980 DC : 0 BS EN 1127-2 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
17/30293127 DC : 0 BS ISO 19880-3 - GASEOUS HYDROGEN - FUELING STATIONS - PART 3: VALVES
10/30227671 DC : 0 BS EN 14678-1 - LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
BS EN 62282-3-1:2007 Fuel cell technologies Stationary fuel cell power systems. Safety
03/108481 DC : DRAFT MAY 2003 ISO 11223 - PETROLEUM AND LIQUID PETROLEUM PRODUCTS - DIRECT STATIC MEASUREMENTS - MEASUREMENT OF CONTENT OF VERTICAL STORAGE TANKS BY HYDROSTATIC TANK GAUGING
12/30260078 DC : 0 BS EN 60092-502 IEC 60092-502 - ELECTRICAL INSTALLATIONS IN SHIPS - PART 502: TANKERS - SPECIAL FEATURES
CEN/TR 15339-4:2014 Thermal spraying - Safety requirements for thermal spraying equipment - Part 4: Gas and liquid fuel supply
PD ISO/PAS 19891-1:2016 Ships and marine technology. Specifications for gas detectors intended for use on board ships Portable gas detectors for atmosphere testing of enclosed spaces
BS EN 61987-12:2016 Industrial-process measurement and control. Data structures and elements in process equipment catalogues Lists of properties (LOPs) for flow measuring equipment for electronic data exchange
17/30356593 DC : 0 BS EN ISO 15138 - PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - HEATING, VENTILATION AND AIR-CONDITIONING
05/30132844 DC : DRAFT APR 2005 EN 15207 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - PLUG/SOCKET CONNECTION AND SUPPLY CHARACTERISTICS FOR SERVICE EQUIPMENT IN HAZARDOUS AREAS
I.S. EN 62798:2014 INDUSTRIAL ELECTROHEATING EQUIPMENT - TEST METHODS FOR INFRARED EMITTERS
I.S. CLC TR 50427:2005 ASSESSMENT OF INADVERTENT IGNITION OF FLAMMABLE ATMOSPHERES BY RADIO-FREQUENCY RADIATION - GUIDE
07/30162732 DC : 0 BS EN 60079-10-2 - EXPLOSIVE ATMOSPHERES - PART 10-2: CLASSIFICATION OF AREAS - COMBUSTIBLE DUST ATMOSPHERES
BS EN 45544-1:2015 Workplace atmospheres. Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours General requirements and test methods
06/30157092 DC : 0 ISO/DIS 21789 - GAS TURBINE APPLICATIONS - SAFETY
BS 7812:1995 Guide for selection, specification, installation, operation and maintenance of automatic liquid level and temperature measuring instruments on petroleum storage tanks
NF EN 60079-15 : 2010 EXPLOSIVE ATMOSPHERES - PART 15: EQUIPMENT PROTECTION BY TYPE OF PROTECTION 'N'
PREN 12405-3 : DRAFT 2013 GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
03/313403 DC : DRAFT SEP 2003 IEC 60079-27 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 27: FIELDBUS INTRINSICALLY SAFE CONCEPT (FISCO) AND FIELDBUS NON-INCENDIVE CONCEPT (FNICO)
BIS IS/IEC 60079-25 : 2010 EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS
14/30312016 DC : 0 BS EN ISO/IEC 60079-13 - EXPLOSIVE ATMOSPHERES - PART 13: EQUIPMENT PROTECTION BY PRESSURIZED ROOM 'P' AND ARTIFICIALLY VENTILATED ROOM 'V'
UNE-EN 60079-10-1:2016 Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres
I.S. EN ISO 13297:2014 SMALL CRAFT - ELECTRICAL SYSTEMS - ALTERNATING CURRENT INSTALLATIONS (ISO 13297:2014)
BS EN 61285:2015 Industrial-process control. Safety of analyzer houses
CSA C22.4 No. 1 : 2009(R2018) OBJECTIVE-BASED INDUSTRIAL ELECTRICAL CODE
08/30173506 DC : DRAFT JAN 2008 BS EN 1539 - DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS
NF EN 15268 : 2008 PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION AND SUBMERSIBLE PUMP ASSEMBLIES
I.S. EN 60034-30:2009 ROTATING ELECTRICAL MACHINES - PART 30: EFFICIENCY CLASSES OF SINGLE-SPEED, THREE-PHASE, CAGE-INDUCTION MOTORS
BS EN 62013-1:2006 Caplights for use in mines susceptible to firedamp General requirements. Construction and testing in relation to the risk of explosion
IEC 60079-33:2012 Explosive atmospheres - Part 33: Equipment protection by special protection 's'
DIN EN 12405-3:2016-04 Gas meters - Conversion devices - Part 3: Flow computer
CSA E60079.15 : 2002 : R2011 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ELECTRICAL APPARATUS WITH TYPE OF PROTECTION "n"
DIN EN ISO 17621 E : 2015 WORKPLACE ATMOSPHERES - SHORT TERM DETECTOR TUBE MEASUREMENT SYSTEMS - REQUIREMENTS AND TEST METHODS (ISO 17621:2015)
CEI EN 50104 : 2011 ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF OXYGEN - PERFORMANCE REQUIREMENTS AND TEST METHODS
DIN IEC 60721-1:1993-05 ELECTRICAL ENGINEERING; CLASSIFICATION OF ENVIRONMENTAL CONDITIONS; ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES
CEI EN 50495 : 2011 SAFETY DEVICES REQUIRED FOR THE SAFE FUNCTIONING OF EQUIPMENT WITH RESPECT TO EXPLOSION RISKS
ISO/TS 19880-1:2016 Gaseous hydrogen Fuelling stations Part 1: General requirements
EN 15339-2:2007 Thermal spraying - Safety requirements for thermal spraying equipment - Part 2: Gas control units
API 616 : 2011 GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
CSA C22.2 No. 61010.2.042 : 1998: R2013 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PARTICULAR REQUIREMENTS FOR AUTOCLAVES AND STERILIZERS USING TOXIC GAS FOR THE TREATMENT OF MEDICAL MATERIALS, AND FOR LABORATORY PROCESSES
UNE-EN 12405-1:2006 Gas meters - Conversion devices - Part 1: Volume conversion
I.S. EN 50176:2009 STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
I.S. EN 1012-3:2013 COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS
I.S. EN 415-10:2014 SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
I.S. EN 62282-5-1:2012 FUEL CELL TECHNOLOGIES - PART 5-1: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-5-1:2012 (EQV))
PREN 13012 : DRAFT 2010 PETROL FILLING STATIONS - CONSTRUCTION AND PERFORMANCE OF AUTOMATIC NOZZLES FOR USE ON FUEL DISPENSERS
CEI EN 61285 : 2016 INDUSTRIAL-PROCESS CONTROL - SAFETY OF ANALYZER HOUSES
UNI EN 13175 : 2015 LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS
BS EN 60079-19 : 2011 EXPLOSIVE ATMOSPHERES - PART 19: EQUIPMENT REPAIR, OVERHAUL AND RECLAMATION
S.R. CEN/TR 15339-4:2014 THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 4: GAS AND LIQUID FUEL SUPPLY
I.S. EN 60079-15:2010 EXPLOSIVE ATMOSPHERES - PART 15: EQUIPMENT PROTECTION BY TYPE OF PROTECTION 'N'
ONORM EN ISO 13297 : 2015 SMALL CRAFT - ELECTRICAL SYSTEMS - ALTERNATING CURRENT INSTALLATIONS (ISO 13297:2014)
BIS IS/IEC 60079-2 : 2007 EXPLOSIVE ATMOSPHERES - PART 2: EQUIPMENT PROTECTION BY PRESSURIZED ENCLOSURE 'P'
I.S. EN 1474-1:2008 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
BS EN 12405-1 : 2005 GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
S.R. CEN/TR 16787:2014 INDUSTRIAL GAS INSTALLATION - GUIDELINE
I.S. EN 61241-1:2004 ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 1: PROTECTION BY ENCLOSURES "TD"
I.S. EN ISO 15970:2014 NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR (ISO 15970:2008)
I.S. EN 13175:2014 LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS
I.S. EN 15714-2:2009 INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS
ISO 16923:2016 Natural gas fuelling stations — CNG stations for fuelling vehicles
CEI EN 60079-32-2 : 2016 EXPLOSIVE ATMOSPHERES - PART 32-2: ELECTROSTATICS HAZARDS - TESTS
EN 16657:2016 Tanks for the transport of dangerous goods - Transport tank equipment for overfill prevention devices for static tanks
PD CLC/TR 60079-32-1:2015 Explosive atmospheres Electrostatic hazards, guidance
ISO/IEC 80079-38:2016 Explosive atmospheres Part 38: Equipment and components in explosive atmospheres in underground mines
BS ISO 13577-1:2016 Industrial furnaces and associated processing equipment. Safety General requirements
BS EN ISO 8846:2017 Small craft. Electrical devices. Protection against ignition of surrounding flammable gases
BS EN ISO 6416:2005 Hydrometry. Measurement of discharge by the ultrasonic (acoustic) method
I.S. EN 1034-17:2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES
CEI EN 60079-29-4 : 2011 EXPLOSIVE ATMOSPHERES - PART 29-4: GAS DETECTORS - PERFORMANCE REQUIREMENTS OF OPEN PATH DETECTORS FOR FLAMMABLE GASES
CSA C22.2 No. 60079-25 : 2014 EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS
S.R. CLC/TS 60034-31:2011 ROTATING ELECTRICAL MACHINES - PART 31: SELECTION OF ENERGY-EFFICIENT MOTORS INCLUDING VARIABLE SPEED APPLICATIONS - APPLICATION GUIDE
UNE-EN 50050-3:2014 Electrostatic hand-held spraying equipment - Safety requirements - Part 3: Hand-held spraying equipment for ignitable flock
17/30356734 DC : 0 BS EN 14236 - ULTRASONIC DOMESTIC GAS METERS
EN ISO 6416:2017 Hydrometry - Measurement of discharge by the ultrasonic transit time (time of flight) method (ISO 6416:2017)
18/30369304 DC : DRAFT APR 2018 BS EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
EN ISO 13297:2014 Small craft - Electrical systems - Alternating current installations (ISO 13297:2014)
UNI EN 12405-1 : 2010 GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
I.S. EN 61241-11:2007 ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 11: PROTECTION BY INTRINSIC SAFETY "ID"
I.S. EN 61987-16:2017 INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 16: LISTS OF PROPERTIES (LOPS) FOR DENSITY MEASURING EQUIPMENT FOR ELECTRONIC DATA EXCHANGE
I.S. EN 61779-1:2003 ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
EN 12261:2018 Gas meters - Turbine gas meters
IEC 60079-1 REDLINE : 7ED 2014 EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D'
NF ISO 16110-1 : 2009 HYDROGEN GENERATORS USING FUEL PROCESSING TECHNOLOGIES - PART 1: SAFETY
NF EN 50050 : 2007 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT
GOST R IEC 62086-2 : 2005 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 2: ELECTRICAL RESISTANCE TRACE HEATING - APPLICATION GUIDE FOR DESIGN, INSTALLATION AND MAINTENANCE
DIN EN ISO/IEC 80079-38:2012-08 (Draft) EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079-38:2016)
I.S. EN 16009:2011 FLAMELESS EXPLOSION VENTING DEVICES
EN 60079-19:2011/A1:2015 EXPLOSIVE ATMOSPHERES - PART 19: EQUIPMENT REPAIR, OVERHAUL AND RECLAMATION (IEC 60079-19:2010)
EN 13617-1:2012 Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
IEC 60079-18:2014 RLV Explosive atmospheres - Part 18: Equipment protection by encapsulation “m”
AAMI ES60601-1 : 2005 : INC : AMD 1 : 2012 : R201200 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
ISO 6826:1997 Reciprocating internal combustion engines Fire protection
AAMI ES60601-1 : 2005 : INC : AMD 2 : 2012 : R201200 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
IEC 61241-1-2:1999 Electrical apparatus for use in the presence of combustible dust - Part 1-2: Electrical apparatus protected by enclosures and surface temperature limitation - Selection, installation and maintenance
IEC 60079-7:2015+AMD1:2017 CSV Explosive atmospheres - Part 7: Equipment protection by increased safety "e"
EN 378-3:2016 Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site and personal protection
EN ISO 80079-36:2016 Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements (ISO 80079-36:2016)
AAMI ES60601-1 : 2005 : R2012 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
DIN EN 1804-3:2010-05 Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems (includes Amendment A1:2010)
EN IEC 60079-7:2015/A1:2018 EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E' (IEC 60079-7:2015/A1:2017)
BS EN ISO 80079-36:2016 Explosive atmospheres Non-electrical equipment for explosive atmospheres. Basic method and requirements
DIN EN 13355:2010-06 COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
DIN EN 1473:2016-10 Installation and equipment for liquefied natural gas - Design of onshore installations
BS EN 1755:2015 Industrial Trucks. Safety requirements and verification. Supplementary requirements for operation in potentially explosive atmospheres
BS EN 13463-1:2009 Non-electrical equipment for use in potentially explosive atmospheres Basic method and requirements
UNE-EN 1127-1:2012 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
BS ISO 26142:2010 Hydrogen detection apparatus. Stationary applications
BS EN 13160-1:2003 Leak detection systems General principles
BS EN 50174-2 : 2009 INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS
IEC 60079-26:2014 RLV Explosive atmospheres - Part 26: Equipment with Equipment Protection Level (EPL) Ga
BS EN 14797:2006 Explosion venting devices
13/30238229 DC : 0 BS EN 62052-31 - ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TEST AND TEST CONDITIONS - PART 31: PRODUCT SAFETY REQUIREMENTS
09/30200619 DC : 0 BS IEC 61892-1 - MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS AND CONDITIONS
BS EN 60079-18 : 2015 EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M'
IEC 62086-2:2001 Electrical apparatus for explosive gas atmospheres - Electrical resistance trace heating - Part 2: Application guide for design, installation and maintenance
I.S. EN 12583:2014 GAS INFRASTRUCTURE - COMPRESSOR STATIONS - FUNCTIONAL REQUIREMENTS
I.S. EN 12921-1:2005 MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS
CLC/TR 60079-33:2015 Explosive atmospheres - Part 33: Equipment protection by special protection 's'
EN 60079-26:2015 Explosive atmospheres - Part 26: Equipment with Equipment Protection Level (EPL) Ga
EN 60695-1-10:2017 Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines
EN 12753:2005+A1:2010 Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements
EN 62052-31:2016 Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 31: Product safety requirements and tests
DIN EN 137:2007-01 RESPIRATORY PROTECTIVE DEVICES - SELF-CONTAINED OPEN-CIRCUIT COMPRESSED AIR BREATHING APPARATUS WITH FULL FACE MASK - REQUIREMENTS, TESTING, MARKING
EN 60079-25:2010/AC:2013 EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS (IEC 60079-25:2010)
EN 1034-17:2012 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 17: Tissue making machines
EN 62013-1:2006 Caplights for use in mines susceptible to firedamp - Part 1: General requirements - Construction and testing in relation to the risk of explosion
EN 62282-3-1 : 2007 FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
DIN EN 14797:2007-03 Explosion venting devices
DIN EN 13922:2011-11 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - OVERFILL PREVENTION SYSTEMS FOR LIQUID FUELS
EN 61241-14:2004 Electrical apparatus for use in the presence of combustible dust - Part 14: Selection and installation
EN 61158-2:2014 Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition
EN 13463-1:2009 Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements
DIN EN 12312-5:2009-08 Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment (includes Amendment A1:2009)
EN 61241-1:2004/corrigendum Dec. 2006 ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 1: PROTECTION BY ENCLOSURES "TD"
EN 1010-1:2004+A1:2010 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements
EN 12050-1:2015 Wastewater lifting plants for buildings and sites - Part 1: Lifting plants for wastewater containing faecal matter
EN 50176:2009 Stationary electrostatic application equipment for ignitable liquid coating material - Safety requirements
IEC 60695-1-10:2016 RLV Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines
EN 16191:2014 Tunnelling machinery - Safety requirements
EN 13237:2012 Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres
EN 50177:2009/A1:2012 STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE COATING POWDERS - SAFETY REQUIREMENTS
EN 61784-5-3:2013 Industrial communication networks - Profiles - Part 5-3: Installation of fieldbuses - Installation profiles for CPF 3
EN 61987-12:2016 Industrial- Process Measurement and Control - Data Structures and Elements in Process Equipment Catalogues - Part 12: Lists of properties (LOPs) for flow measuring equipment for electronic data exchange
EN 12941:1998/A2:2008 RESPIRATORY PROTECTIVE DEVICES - POWERED FILTERING DEVICES INCORPORATING A HELMET OR A HOOD - REQUIREMENTS, TESTING, MARKING
EN 60034-30-1:2014 Rotating electrical machines - Part 30-1: Efficiency classes of line operated AC motors (IE code)
EN 12779:2015 Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements
EN 13160-3:2016 Leak detection systems - Part 3: Requirements and test/assessment methods for liquid systems for tanks
EN 61987-13:2016 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 13: Lists of properties (LOP) for Pressure Measuring Equipment for electronic data exchange
EN 12621:2006+A1:2010 Machinery for the supply and circulation of coating materials under pressure - Safety requirements
EN 61241-17:2005 Electrical apparatus for use in the presence of combustible dust - Part 17: Inspection and maintenance of electrical installations in hazardous areas (other than mines)
EN 1248:2001+A1:2009 Foundry machinery - Safety requirements for abrasive blasting equipment
EN 60079-28:2015 Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation
EN 60079-29-4:2010 Explosive atmospheres - Part 29-4: Gas detectors - Performance requirements of open path detectors for flammable gases
EN 60079-32-2:2015 Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests
EN 62086-1:2005 Electrical apparatus for explosive gas atmospheres - Electrical resistance trace heating - Part 1: General and testing requirements
EN 60079-31:2014 Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t"
EN 50495:2010 Safety devices required for the safe functioning of equipment with respect to explosion risks
EN 62657-1:2017 Industrial communication networks - Wireless communication networks - Part 1: Wireless communication requirements and spectrum considerations
EN 12921-1:2005+A1:2010 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements
EN 12215:2004+A1:2009 Coating plants - Spray booths for application of organic liquid coating materials - Safety requirements
EN 12757-1:2005+A1:2010 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing
EN 62952-1:2016 Power sources for a wireless communication device - Part 1: General requirements of power modules
EN 13355:2004+A1:2009 Coating plants - Combined booths - Safety requirements
EN 60079-27:2008 Explosive atmospheres - Part 27: Fieldbus intrinsically safe concept (FISCO)
EN 13160-1:2016 Leak detection systems - Part 1: General Principles
EN 50050-3:2013 Electrostatic hand-held spraying equipment - Safety requirements - Part 3: Hand-held spraying equipment for ignitable flock
EN ISO 80079-37:2016 Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical type of protection constructional safety 'c', control of ignition sources 'b', liquid immersion 'k' (ISO 80079-37:2016)
DIN EN 14492-2:2010-05 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
HD 60364-5-54:2011/A11:2017 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-54: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - EARTHING ARRANGEMENTS AND PROTECTIVE CONDUCTORS
EN 62086-2:2005 Electrical apparatus for explosive gas atmospheres - Electrical resistance trace heating - Part 2: Application guide for design, installation and maintenance
EN 60702-2:2002/A1:2015 MINERAL INSULATED CABLES AND THEIR TERMINATIONS WITH A RATED VOLTAGE NOT EXCEEDING 750 V - PART 2: TERMINATIONS (IEC 60702-2:2002/A1:2015)
EN 62798:2014/AC:2014 INDUSTRIAL ELECTROHEATING EQUIPMENT - TEST METHODS FOR INFRARED EMITTERS (IEC 62798:2014)
DEFSTAN 00-101(PT3)/1(2005) : 2005 DESIGN STANDARDS FOR EXPLOSIVES SAFETY IN MOD SHIPS AND SUBMARINES - PART 3: ELECTRICAL EQUIPMENT AND INSTALLATION
ANSI/CSA AMERICA FC 3-2004 (R2017) PORTABLE FUEL CELL POWER SYSTEMS
DEFSTAN 00-101(PT3)/2(2008) : 2008 DESIGN STANDARDS FOR EXPLOSIVES SAFETY IN MOD SHIPS AND SUBMARINES - PART 3: ELECTRICAL EQUIPMENT AND INSTALLATION
OVE/ONORM EN 62282-4-101 : 2015 FUEL CELL TECHNOLOGIES - PART 4-101: FUEL CELL POWER SYSTEMS FOR PROPULSION OTHER THAN ROAD VEHICLES AND AUXILIARY POWER UNITS (APU) - SAFETY OF ELECTRICALLY POWERED INDUSTRIAL TRUCKS (IEC 62282-4-101:2014)
OVE/ONORM EN 60079-29-1 : 2008 EXPLOSIVE ATMOSPHERES - PART 29-1: GAS DETECTORS - PERFORMANCE REQUIREMENTS OF DETECTORS FOR FLAMMABLE GASES
OVE/ONORM EN 61936-1 : 2015 AC AUG 2017 POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES (IEC 61936-1:2010, MOD. + COR.:2011 + A1:2014)
CSA FC 3 : 2004 PORTABLE FUEL CELL POWER SYSTEMS
17/30350924 DC : 0 BS EN 60079-42 ED.1.0 - EXPLOSIVE ATMOSPHERES - PART 42: ELECTRICAL SAFETY DEVICES FOR EQUIPMENT
BS EN 60079-32-2:2015 Explosive atmospheres Electrostatics hazards. Tests
09/30162983 DC : 0 BS ISO 13297 - SMALL CRAFT - ELECTRICAL SYSTEMS - ALTERNATING CURRENT INSTALLATIONS
03/301332 DC : DRAFT JAN 2003 ISO 12649 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR BINDING AND FINISHING SYSTEMS AND EQUIPMENT
BS EN 16299:2013 Cathodic protection of external surfaces of above ground storage tankbases in contact with soil or foundations
BS EN 62282-5-1:2012 Fuel cell technologies Portable fuel cell power systems. Safety
BS EN 60079-26:2015 Explosive atmospheres Equipment with Equipment Protection Level (EPL) Ga
CEI EN 60079-13 : 2011 EXPLOSIVE ATMOSPHERES - PART 13: EQUIPMENT PROTECTION BY PRESSURIZED ROOMS 'P'
I.S. EN 62282-3-1:2007 FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
BS EN 61987-13:2016 Industrial-process measurement and control. Data structures and elements in process equipment catalogues Lists of properties (LOP) for Pressure Measuring Equipment for electronic data exchange
NF EN 60079-29-1 : 2008 EXPLOSIVE ATMOSPHERES - PART 29-1: GAS DETECTORS - PERFORMANCE REQUIREMENTS OF DETECTORS FOR FLAMMABLE GASES
DIN EN ISO 13137:2014-03 Workplace atmospheres - Pumps for personal sampling of chemical and biological agents - Requirements and test methods (ISO 13137:2013)
NF EN 14677 : 2008 SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL
NF EN 60079-19 : 2011 AMD 1 2015 EXPLOSIVE ATMOSPHERES - PART 19: EQUIPMENT REPAIR, OVERHAUL AND RECLAMATION
04/30113660 DC : DRAFT MAY 2004 IEC 60079-7 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 7: INCREASED SAFETY 'E'
BS EN 61241-1:2004 Electrical apparatus for use in the presence of combustible dust Protection by enclosures \'tD\'
11/30248842 DC : 0 BS EN 50050-1:2011 - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 1: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIALS
UNI EN 14116 : 2014 TANKS FOR TRANSPORT OF DANGEROUS GOODS - DIGITAL INTERFACE FOR PRODUCT RECOGNITION DEVICES FOR LIQUID FUELS
15/30293847 DC : 0 BS EN ISO 6416 - HYDROMETRY - MEASUREMENT OF DISCHARGE BY THE ULTRASONIC TRANSIT TIME (TIME OF FLIGHT) METHOD
PREN 1672-1 : DRAFT 2012 FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
BS EN 60079-29-2:2015 Explosive atmospheres Gas detectors. Selection, installation, use and maintenance of detectors for flammable gases and oxygen
CEN/TR 16787:2014 Industrial Gas Installation - Guideline
12/30265289 DC : 0 BS EN 12050-1 - WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 1: LIFTING PLANTS FOR WASTEWATER CONTAINING FAECAL MATTER
BS EN ISO 15970:2014 Natural gas. Measurement of properties. Volumetric properties: density, pressure, temperature and compression factor
04/30115023 DC : DRAFT JUL 2004 CLC TR 50427 - ASSESSMENT OF INADVERTENT IGNITION OF FLAMMABLE ATMOSPHERES BY RADIO-FREQUENCY RADIATION - GUIDE
00/243930 DC : DRAFT AUG 2000 IEC 60079-18. ED. 2. ELECTRICAL APPARATUS FOR EXPLOSIVE ATMOSPHERES - PART 18: ENCAPSULATION 'M'
00/241099 DC : DRAFT MAR 2000 IEC 60079-17 EDITION 3 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 17: INSPECTION AND MAINTENANCE OF ELECTRICAL INSTALLATIONS IN HAZARDOUS AREAS (OTHER THAN MINES)
BS EN ISO/IEC 80079-34:2011 Explosive atmospheres Application of quality systems for equipment manufacture
BS EN 62086-2:2005 Electrical apparatus for explosive gas atmospheres. Electrical resistance trace heating Application guide for design, installation and maintenance
08/30180312 DC : DRAFT MAR 2008 BS EN 50223 - STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS
I.S. EN 60079-27:2008 EXPLOSIVE ATMOSPHERES - PART 27: FIELDBUS INTRINSICALLY SAFE CONCEPT (FISCO)
I.S. EN 61241-14:2004 ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 14: SELECTION AND INSTALLATION
I.S. EN 14116:2012 TANKS FOR TRANSPORT OF DANGEROUS GOODS - DIGITAL INTERFACE FOR PRODUCT RECOGNITION DEVICES FOR LIQUID FUELS
12/30259421 DC : 0 BS EN 1672-1 - FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
14/30301251 DC : 0 BS EN 13160-1 - LEAK DETECTION SYSTEMS - PART 1: GENERAL PRINCIPLES
UNI EN 16191 : 2014 TUNNELLING MACHINERY - SAFETY REQUIREMENTS
BS EN 60079-27:2008 Explosive atmospheres Fieldbus intrinsically safe concept (FISCO)
UNE-EN 60079-29-4:2011 Explosive atmospheres -- Part 29-4: Gas detectors - Performance requirements of open path detectors for flammable gases
02/204778 DC : DRAFT JULY 2002 IEC 61241-0 ED.1 - ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 0: GENERAL REQUIREMENTS
BS ISO 14839-4:2012 Mechanical vibration. Vibration of rotating machinery equipped with active magnetic bearings Technical guidelines
06/30145758 DC : DRAFT FEB 2006 ISO 16852 - FLAME ARRESTERS - PERFORMANCE REQUIREMENTS, TEST METHODS AND LIMITS FOR USE
DD CLC/TS 60034-31:2011 Rotating electrical machines Selection of energy-efficient motors including variable speed applications. Application guide
10/30230365 DC : 0 BS EN 50050-2 - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER
05/30128234 DC : DRAFT FEB 2005 EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
14/30254778 DC : 0 BS EN ISO 17621 - WORKPLACE ATMOSPHERES - SHORT TERM DETECTOR TUBE MEASUREMENT SYSTEMS - REQUIREMENTS AND TEST METHODS
04/30099567 DC : DRAFT SEP 2004 ISO 18132 - REFRIGERATED LIGHT HYDROCARBON FLUIDS - MEASUREMENT OF LIQUID LEVELS ON BOARD SHIPS CARRYING LIQUEFIED GASES - GENERAL GUIDANCE
EN 60079-13:2017 Explosive atmospheres - Part 13: Equipment protection by pressurized room "p" and artificially ventilated room "v"
UNI CEI EN 45510-2-5 : 2011 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-5: ELECTRICAL EQUIPMENT - MOTORS
PREN 1953 : DRAFT 2011 ATOMISING AND SPRAYING EQUIPMENT FOR COATING MATERIALS - SAFETY REQUIREMENTS
BS EN 61987-14:2016 Industrial-process measurement and control. Data structures and elements in process equipment catalogues Lists of properties (LOP) for temperature measuring equipment for electronic data exchange
DIN EN ISO 15970:2014-09 NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR (ISO 15970:2008)
BS EN 61987-16:2017 Industrial-process measurement and control. Data structures and elements in process equipment catalogues List of properties (LOPs) for density measuring equipment for electronic data exchange
DD IEC TS 60034-31 : DRAFT JULY 2010 ROTATING ELECTRICAL MACHINES - PART 31: SELECTION OF ENERGY-EFFICIENT MOTORS INCLUDING VARIABLE SPEED APPLICATIONS - APPLICATION GUIDE
06/30160085 DC : 0 BS ISO 15970 - NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR
BS IEC 60092-502:1999 Electrical installation in ships Tankers. Special features
BS EN 50223:2015 Stationary electrostatic application equipment for ignitable flock material. Safety requirements
11/30247355 DC : 0 BS EN 60034-30 ED 2 - ROTATING ELECTRICAL MACHINES - PART 30: EFFICIENCY CLASSES OF SINGLE-SPEED, THREE-PHASE, CAGE-INDUCTION MOTORS (IE-CODE)
UNE-EN 50104:2011 Electrical apparatus for the detection and measurement of oxygen - Performance requirements and test methods
BS 7849-1:1996 Petroleum and liquid petroleum products. Direct static measurements. Contents of vertical storage tanks Mass measurement by hydrostatic tank gauging
BS EN 15268:2008 Petrol filling stations. Safety requirements for the construction of submersible pump assemblies
CEI EN 50176 : 2010 STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
05/30127970 DC : DRAFT JAN 2005 EN 1127-1 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
PD ISO/TS 19883:2017 Safety of pressure swing adsorption systems for hydrogen separation and purification
I.S. EN 60079-28:2015 EXPLOSIVE ATMOSPHERES - PART 28: PROTECTION OF EQUIPMENT AND TRANSMISSION SYSTEMS USING OPTICAL RADIATION
ISA 12.13.01 : 2003 PERFORMANCE REQUIREMENTS FOR COMBUSTIBLE GAS DETECTORS
12/30212889 DC : 0 BS ISO 13137 - WORKPLACE ATMOSPHERES - PUMPS FOR PERSONAL SAMPLING OF CHEMICAL AND BIOLOGICAL AGENTS - REQUIREMENTS AND TEST METHODS
I.S. EN ISO 80079-36:2016 EXPLOSIVE ATMOSPHERES - PART 36: NON-ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES - BASIC METHOD AND REQUIREMENTS (ISO/DIS 80079-36:2014)
S.R. CLC/TS 50131-7:2010 ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 7: APPLICATION GUIDELINES
UNE-EN 12405-3:2016 Gas meters - Conversion devices - Part 3: Flow computer
API 677 : 2006 : R2010 GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES
EN 50174-2 : 2009 AMD 2 2014 INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS
UNI EN 16009 : 2011 FLAMELESS EXPLOSION VENTING DEVICES
IEC 60079-13:2017 Explosive atmospheres - Part 13: Equipment protection by pressurized room "p" and artificially ventilated room "v"
PREN 1539 : DRAFT 2012 DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS
I.S. EN 60079-30-2:2017 EXPLOSIVE ATMOSPHERES - PART 30-2: ELECTRICAL RESISTANCE TRACE HEATING - APPLICATION GUIDE FOR DESIGN, INSTALLATION AND MAINTENANCE
DIN EN 14116:2014-12 TANKS FOR TRANSPORT OF DANGEROUS GOODS - DIGITAL INTERFACE FOR PRODUCT RECOGNITION DEVICES FOR LIQUID FUELS
UNE-EN 60079-31:2016 Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t"
I.S. EN ISO 15138:2007 PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - HEATING, VENTILATION AND AIR-CONDITIONING
BS EN 60079-7 : 2015 EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E' (IEC 60079-7:2015)
BS EN ISO/IEC 80079-38 : 2016 EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079 38:2016)
ISO 10574:1993 Refrigerated light-hydrocarbon fluids — Measurement of liquid levels in tanks containing liquefied gases — Float-type level gauges
S.R. CLC/TR 60079-32-1:2015 EXPLOSIVE ATMOSPHERES - PART 32-1: ELECTROSTATIC HAZARDS - GUIDANCE
CEI EN 60079-30-1 : 2008 EXPLOSIVE ATMOSPHERES - PART 30-1: ELECTRICAL RESISTANCE TRACE HEATING - GENERAL AND TESTING REQUIREMENTS
CSA C22.3 No. 61936-1 : 2008 : R2015 POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES
BS EN 50177 : 2009 STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE COATING POWDERS - SAFETY REQUIREMENTS
I.S. EN ISO/IEC 80079-34:2011 EXPLOSIVE ATMOSPHERES - PART 34: APPLICATION OF QUALITY SYSTEMS FOR EQUIPMENT MANUFACTURE
IEC TR 60079-20:1996 Electrical apparatus for explosive gas atmospheres - Part 20: Data for flammable gases and vapours, relating to the use of electrical apparatus
UNI EN 15268 : 2009 PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION OF SUBMERSIBLE PUMP ASSEMBLIES
I.S. EN 50050:2006 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT
ISO 13577-1:2016 Industrial furnaces and associated processing equipment Safety Part 1: General requirements
GOST R IEC 62086-1 : 2005 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ELECTRICAL RESISTANCE TRACE HEATERS - PART 1: GENERAL TECHNICAL REQUIREMENTS AND TEST METHODS
CEI EN 60695-1-10 : 2012 FIRE HAZARD TESTING - PART 1-10: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - GENERAL GUIDELINES
ISO 12649:2004 Graphic technology Safety requirements for binding and finishing systems and equipment
CEI EN 60079-25 : 2012 EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS
CEI EN 50174-3 : 2014 INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS
BS EN 61310-2:2008 Safety of machinery. Indication, marking and actuation Requirements for marking
UNI EN ISO 15138 : 2008 PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - HEATING, VENTILATION AND AIR-CONDITIONING
ISO 6416:2017 Hydrometry — Measurement of discharge by the ultrasonic transit time (time of flight) method
I.S. EN 50177:2009 STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE COATING POWDERS - SAFETY REQUIREMENTS
16/30341165 DC : 0 BS EN 14492-2 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
I.S. EN 61987-12:2016 INDUSTRIAL- PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 12: LISTS OF PROPERTIES (LOPS) FOR FLOW MEASURING EQUIPMENT FOR ELECTRONIC DATA EXCHANGE
CLC/TS 60034-31:2011 Rotating electrical machines - Part 31: Selection of energy-efficient motors including variable speed applications - Application guide
UNE-EN ISO 13137:2014 Workplace atmospheres - Pumps for personal sampling of chemical and biological agents - Requirements and test methods (ISO 13137:2013)
IEC 61779-6:1999 Electrical apparatus for the detection and measurement of flammable gases - Part 6: Guide for the selection, installation, use and maintenance of apparatus for the detection and measurement of flammable gases
ISO 18647:2017 Petroleum and natural gas industries — Modular drilling rigs for offshore fixed platforms
NF EN 50174-2 : 2009 AMD 1 2011 INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS
BS EN 1127-1:2019 Explosive atmospheres. Explosion prevention and protection Basic concepts and methodology
BS EN 1127-1:2011 Explosive atmospheres. Explosion prevention and protection Basic concepts and methodology
CEI EN 60079-15 : 2012 EXPLOSIVE ATMOSPHERES - PART 15: EQUIPMENT PROTECTION BY TYPE OF PROTECTION 'N'
BIS IS/IEC 60079-15 : 2005 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 15: CONSTRUCTION, TEST AND MARKING OF TYPE OF PROTECTION 'N' ELECTRICAL APPARATUS
EN 13012:2012 Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers
BS EN 13175:2014 LPG Equipment and accessories. Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings
NF EN 15339-2 : 2007 THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 2: GAS CONTROL UNITS
EN 14236:2007 Ultrasonic domestic gas meters
IEC TS 60079-43:2017 Explosive atmospheres - Part 43: Equipment in adverse service conditions
IEC 61936-1:2010+AMD1:2014 CSV Power installations exceeding 1 kV a.c. - Part 1: Common rules
I.S. EN 14591-4:2007 EXPLOSION PREVENTION AND PROTECTION IN UNDERGROUND MINES - PROTECTIVE SYSTEMS - PART 4: AUTOMATIC EXTINGUISHING SYSTEMS FOR ROAD HEADERS
I.S. EN 62086-2:2005 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ELECTRICAL RESISTANCE TRACE HEATING - PART 2: APPLICATION GUIDE FOR DESIGN, INSTALLATION AND MAINTENANCE
AAMI ES60601-1 : 2005 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
I.S. EN 15268:2008 PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION OF SUBMERSIBLE PUMP ASSEMBLIES
IEC 60079-1:2014 RLV Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
I.S. EN 14492-2:2006 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
IEC 60079-29-4:2009 Explosive atmospheres - Part 29-4: Gas detectors - Performance requirements of open path detectors for flammable gases
DIN EN 12779:2016-03 Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements
DIN EN 1010-1:2011-06 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements (includes Amendment A1:2010)
DIN EN 12215:2010-06 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
IEC 60079-10-1:2015 RLV Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres
DIN EN 12941:2009-02 RESPIRATORY PROTECTIVE DEVICES - POWERED FILTERING DEVICES INCORPORATING A HELMET OR A HOOD - REQUIREMENTS, TESTING, MARKING
DIN EN 12942:2009-02 RESPIRATORY PROTECTIVE DEVICES - POWER ASSISTED FILTERING DEVICES INCORPORATING FULL FACE MASKS, HALF MASKS OR QUARTER MASKS - REQUIREMENTS, TESTING, MARKING
DIN EN 12621:2011-07 Machinery for the supply and circulation of coating materials under pressure - Safety requirements (includes Amendment A1:2010)
DIN EN 12581:2011-02 Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements (includes Amendment A1:2010)
DIN EN 12981:2010-06 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
DIN EN 13617-1:2012-08 Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
DIN EN 14681:2010-10 Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces (includes Amendment A1:2010)
DIN EN ISO 80079-36 E : 2016 EXPLOSIVE ATMOSPHERES - PART 36: NON-ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES - BASIC METHOD AND REQUIREMENTS (ISO 80079-36:2016)
BS EN 13355 : 2004 COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
ISO 80079-36:2016 Explosive atmospheres Part 36: Non-electrical equipment for explosive atmospheres Basic method and requirements
17/30362889 DC : 0 BS EN 13175 - LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS
EN 62282-3-100:2012 Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety
BS EN 12757-1 : 2005 MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
BS EN 1473:2016 Installation and equipment for liquefied natural gas. Design of onshore installations
BS EN 12981 : 2005 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
IEC 61779-1:1998 Electrical apparatus for the detection and measurement of flammable gases - Part 1: General requirements and test methods
09/30205023 DC : 0 BS EN 61158-2 - INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 2: PHYSICAL LAYER SPECIFICATION AND SERVICE DEFINITION
BS EN 60825-1:2014 Safety of laser products Equipment classification and requirements
EEMUA 181 : 1995 GUIDE TO RISK BASED ASSESSMENTS OF IN-SITU LARGE EX 'E' AND EX 'N' MACHINES
CSA M421 : 2011 USE OF ELECTRICITY IN MINES
I.S. EN 12215:2004 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
I.S. EN 14492-1:2006 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
I.S. EN 15207:2014 TANKS FOR TRANSPORT OF DANGEROUS GOODS - PLUG/SOCKET CONNECTION AND SUPPLY CHARACTERISTICS FOR SERVICE EQUIPMENT IN HAZARDOUS AREAS WITH 24 V NOMINAL SUPPLY VOLTAGE
I.S. EN 14678-1:2013 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
I.S. EN 1248:2001 FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR ABRASIVE BLASTING EQUIPMENT
UNI EN 1804-3 : 2010 MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 3: HYDRAULIC CONTROL SYSTEMS
I.S. EN 1804-3:2006 MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 3: HYDRAULIC CONTROL SYSTEMS
DIN EN 1755:2016-02 Industrial Trucks - Safety requirements and verification - Supplementary requirements for operation in potentially explosive atmospheres
DIN EN 1248:2010-06 Foundry machinery - Safety requirements for abrasive blasting equipment (includes Amendment A1:2009)
DIN EN 1473:1997-11 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
I.S. EN 137:2006 RESPIRATORY PROTECTIVE DEVICES - SELF-CONTAINED OPEN-CIRCUIT COMPRESSED AIR BREATHING APPARATUS WITH FULL FACE MASK - REQUIREMENTS, TESTING, MARKING
I.S. EN 13237:2012 POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
I.S. EN 13012:2012 PETROL FILLING STATIONS - CONSTRUCTION AND PERFORMANCE OF AUTOMATIC NOZZLES FOR USE ON FUEL DISPENSERS
I.S. EN 12757-1:2005 MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
I.S. EN 60079-11:2012 EXPLOSIVE ATMOSPHERES - PART 11: EQUIPMENT PROTECTION BY INTRINSIC SAFETY 'I'
DIN EN 1127-1:2011-10 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
DIN EN 14492-1:2010-06 Cranes - Power driven winches and hoists - Part 1: Power driven winches (includes Amendment A1:2009)
DIN EN 12583:2000-11 GAS INFRASTRUCTURE - COMPRESSOR STATIONS - FUNCTIONAL REQUIREMENTS
I.S. EN 13160-3:2016 LEAK DETECTION SYSTEMS - PART 3: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR LIQUID SYSTEMS FOR TANKS
I.S. EN 12921-3:2005 MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 3: SAFETY OF MACHINES USING FLAMMABLE CLEANING LIQUIDS
I.S. EN 12621:2006 MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
DIN EN 13852-2:2005-03 Cranes - Offshore cranes - Part 2: Floating cranes
DIN EN 13463-1:2009-07 NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS
I.S. EN 14681:2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES
I.S. EN 13160-1:2016 LEAK DETECTION SYSTEMS - PART 1: GENERAL PRINCIPLES
I.S. EN 12981:2005 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
I.S. EN 378-3:2016 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 3: INSTALLATION SITE AND PERSONAL PROTECTION
I.S. EN 1539:2015 DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS
I.S. EN 13355:2005 COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
I.S. EN 1755:2015 INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - SUPPLEMENTARY REQUIREMENTS FOR OPERATION IN POTENTIALLY EXPLOSIVE ATMOSPHERES
EN 60079-10-1:2015 Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres
I.S. EN 12312-5:2005 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 5: AIRCRAFT FUELLING EQUIPMENT
I.S. EN 1473:2016 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
I.S. EN 12779:2015 SAFETY OF WOODWORKING MACHINES - CHIP AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATION - SAFETY RELATED PERFORMANCES AND SAFETY REQUIREMENTS
I.S. EN 13617-1:2012 PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
EN 12312-5:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment
EN 60079-14:2014/AC:2016 EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016)
EN 60079-15:2010 Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
I.S. EN 1010-1:2005 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS
DIN EN 15339-2:2007-06 Thermal spraying - Safety requirements for thermal spraying equipment - Part 2: Gas control units
EN 60825-1:2014/AC:2017-06 SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS (IEC 60825-1:2014)
EN 1804-3:2006+A1:2010 Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems
I.S. EN 1953:2013 ATOMISING AND SPRAYING EQUIPMENT FOR COATING MATERIALS - SAFETY REQUIREMENTS
I.S. EN 12753:2005 THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS
I.S. EN 12050-1:2015 WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 1: LIFTING PLANTS FOR WASTEWATER CONTAINING FAECAL MATTER
I.S. EN 12581:2006 COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
EN 45544-1:2015 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 1: General requirements and test methods
VDI/VDE 3518 Blatt 1:2011-05 Multigas sensors - Terms, configuration, function and classification
VDE 0165-10 : 1999 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 17: INSPECTION AND MAINTENANCE OF ELECTRICAL INSTALLATIONS IN HAZARDOUS AREAS (OTHER THAN MINES)
ONORM EN ISO 13137 : 2014 WORKPLACE ATMOSPHERES - PUMPS FOR PERSONAL SAMPLING OF CHEMICAL AND BIOLOGICAL AGENTS - REQUIREMENTS AND TEST METHODS (ISO 13137:2013)
BIS IS/IEC 60079-11 : 2006 EXPLOSIVE ATMOSPHERES - PART 11: EQUIPMENT PROTECTION BY INTRINSIC SAFETY 'I'
VDI 4631:2011-02 Quality criteria for biogas plants
BIS IS/IEC 60079-18 : 2009 EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M'
VDI 2263 Blatt 7:2010-07 Dust fires and dust explosions - Hazards - assessment - protective measures - Dust fires and explosion protection in spraying and drying integrated equipment
VDI 2263 Blatt 6:2017-08 Dust fires and dust explosions - Hazards - assessment - protective measures - Dust fires and explosion protection in dust extracting installations
VDI 2263 Blatt 5.1:2014-10 Dust fires and dust explosions - Hazards, assessment, protective measures - Explosion protection in fluid bed dryers - Hints and examples of operation
VDI 2262 Blatt 1:2013-06 Workplace air - Reduction of exposure to air pollutants - Legal principles, terms and definitions, basic organisational measures for industrial safety and environmental protection
DIN EN 61779-1 : 2001 AMD 11 2004 ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
VDE 0411-2-042 : 1997 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-042: PARTICULAR REQUIREMENTS FOR AUTOCLAVES AND STERILIZERS USING TOXIC GAS FOR THE TREATMENT OF MEDICAL MATERIALS, AND FOR LABORATORY PROCESSES
OVE/ONORM EN 60601-1 : 2014 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005 + COR.:2006 + COR.:2007 + A1:2012)
VDI/VDE 3515:2007-12 Multi-contact plug system for electrodes used in process analysis technology
UNE-EN 13616-1:2016 Overfill prevention devices for static tanks for liquid fuels - Part 1: Overfill prevention devices with closure device
CEI EN 50050-2 : 2014 ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER
I.S. EN ISO 13137:2013 WORKPLACE ATMOSPHERES - PUMPS FOR PERSONAL SAMPLING OF CHEMICAL AND BIOLOGICAL AGENTS - REQUIREMENTS AND TEST METHODS (ISO 13137:2013)
DIN EN ISO 80079-37 E : 2016 EXPLOSIVE ATMOSPHERES - PART 37: NON-ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES - NON-ELECTRICAL TYPE OF PROTECTION CONSTRUCTIONAL SAFETY 'C', CONTROL OF IGNITION SOURCES 'B', LIQUID IMMERSION 'K' (ISO 80079-37:2016)
ISO 11223:2004 Petroleum and liquid petroleum products Direct static measurements Measurement of content of vertical storage tanks by hydrostatic tank gauging
17/30321967 DC : 0 BS ISO/IEC 20435-1 - WORKPLACE ATMOSPHERES - PART 1: GAS DETECTORS - PERFORMANCE REQUIREMENTS OF DETECTORS FOR TOXIC GASES
10/30219402 DC : 0 BS EN 13012 - PETROL FILLING STATIONS - CONSTRUCTION AND PERFORMANCE OF AUTOMATIC NOZZLES FOR USE ON FUEL DISPENSERS
12/30262932 DC : 0 BS EN 15339-3 - THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 3: TORCHES FOR THERMAL SPRAYING AND THEIR CONNECTION AND SUPPLY UNITS
15/30332072 DC : 0 BS EN 62952-3 ED. 1.0 - POWER SOURCES FOR A WIRELESS COMMUNICATION DEVICE - PART 3: ENERGY HARVESTING SPECIFICATION
DIN EN ISO 15970 E : 2014 NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR (ISO 15970:2008)
13/30257895 DC : 0 BS EN 1755 - SAFETY OF INDUSTRIAL TRUCKS - OPERATION IN POTENTIALLY EXPLOSIVE ATMOSPHERES - USE IN FLAMMABLE GAS, VAPOUR, MIST AND DUST
13/30289289 DC : 0 BS EN 12405-3 - GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
PD CEN/CLC/TR 16832:2015 Selection, use, care and maintenance of personal protective equipment for preventing electrostatic risks in hazardous areas (explosion risks)
PREN 14678-1 : DRAFT 2010 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
BS EN 50050-2:2013 Electrostatic hand-held spraying equipment. Safety requirements Hand-held spraying equipment for ignitable coating powder
PREN 12941 : DRAFT 2016 RESPIRATORY PROTECTIVE DEVICES - POWERED FILTERING DEVICES INCORPORATING A LOOSE FITTING RESPIRATORY INTERFACE - REQUIREMENTS, TESTING, MARKING
DIN EN ISO 80079-37:2016-12 Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical type of protection constructional safety "c", control of ignition sources "b", liquid immersion "k" (ISO 80079-37:2016)
PREN 1473 : DRAFT 2018 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
BS EN 60079-31:2014 Explosive atmospheres Equipment dust ignition protection by enclosure \'t\'
PREN 13617-1 : DRAFT 2010 PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
11/30247811 DC : 0 BS EN 415-10 - SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
EN ISO 8846:2017 Small craft - Electrical devices - Protection against ignition of surrounding flammable gases (ISO 8846:1990)
I.S. EN 61987-13:2016 INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 13: LISTS OF PROPERTIES (LOP) FOR PRESSURE MEASURING EQUIPMENT FOR ELECTRONIC DATA EXCHANGE
NF EN 61285 : 2015 INDUSTRIAL-PROCESS CONTROL - SAFETY OF ANALYZER HOUSES
14/30300117 DC : 0 BS EN 13175 - LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS
BS IEC 62086-1 : 2001 AMD 16069 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ELECTRICAL RESISTANCE TRACE HEATING - PART 1: GENERAL AND TESTING REQUIREMENTS
BS EN ISO 16904:2016 Petroleum and natural gas industries. Design and testing of LNG marine transfer arms for conventional onshore terminals
UNE-EN 16657:2016 Tanks for the transport of dangerous goods - Transport tank equipment for overfill prevention devices for static tanks
09/30175678 DC : 0 BS EN 14681:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES
BS PD CEN/TR 16832 : 2015 SELECTION, USE, CARE AND MAINTENANCE OF PERSONAL PROTECTIVE EQUIPMENT FOR PREVENTING ELECTROSTATIC RISKS IN HAZARDOUS AREAS (EXPLOSION RISKS)
ISO 13707:2000 Petroleum and natural gas industries Reciprocating compressors
PD IEC/TS 60079-40:2015 Explosive atmospheres Requirements for process sealing between flammable process fluids and electrical systems
DIN EN 14677:2008-11 SAFETY OF MACHINERY - SECONDARY STEEL MAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL
I.S. EN 62086-1:2005 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ELECTRICAL RESISTANCE TRACE HEATING - PART 1: GENERAL AND TESTING REQUIREMENTS
12/30260552 DC : 0 BS EN 50174-3:201X - INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS
CLC/TR 50427:2004 Assessment of inadvertent ignition of flammable atmospheres by radio-frequency radiation - Guide
PREN 14492-1 : DRAFT 2015 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
BS EN 60079-10-2:2015 Explosive atmospheres Classification of areas. Explosive dust atmospheres
12/30258755 DC : 0 BS EN 1539 - DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS
15/30303554 DC : 0 BS ISO 18647 - SPECIFICATIONS FOR OFFSHORE MODULAR DRILLING RIGS ON FIXED PLATFORMS
15/30318557 DC : 0 BS EN 61987-14 ED. 1.0 - INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 14: LISTS OF PROPERTIES (LOP) FOR TEMPERATURE MEASURING EQUIPMENT FOR ELECTRONIC DATA EXCHANGE
04/30114086 DC : DRAFT JUL 2004 EN ISO 10440-1 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS (OIL-FREE)
PD IEC 60079-20:2000 Electrical apparatus for explosive gas atmospheres Data for flammable gases and vapours, relating to the use of electrical apparatus
14/30278882 DC : 0 BS EN 60079-7 IEC 60079-7 ED. 5.0 - EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E'
10/30215694 DC : 0 BS ISO 18132-3 - REFRIGERATED HYDROCARBON FLUIDS AND NON-PETROLEUM BASED LIQUEFIED GASEOUS FUELS - GENERAL REQUIREMENTS FOR AUTOMATIC TANK GAUGES - PART 3: AUTOMATIC TANK GAUGES FOR LIQUEFIED PETROLEUM AND CHEMICAL GASES ON BOARD MARINE CARRIERS AND FLOATING STORAGE
14/30311363 DC : 0 PD IEC/TS 60079-39 ED1.0 - EXPLOSIVE ATMOSPHERES - PART 39: INTRINSICALLY SAFE SYSTEMS WITH ELECTRONICALLY CONTROLLED SPARK DURATION LIMITATION
07/30161347 DC : 0 BS EN 60034-30 - ROTATING ELECTRICAL MACHINES - PART 30: EFFICIENCY CLASSES OF SINGLE-SPEED THREE-PHASE CAGE INDUCTION MOTORS
BS EN 60079-17:2014 Explosive atmospheres Electrical installations inspection and maintenance
16/30354071 DC : 0 BS EN 62282-3-100 - FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
BS EN 62798:2014 Industrial electroheating equipment. Test methods for infrared emitters
EN 1473:2016 Installation and equipment for liquefied natural gas - Design of onshore installations
NF EN 50495 : 2010 SAFETY DEVICES REQUIRED FOR THE SAFE FUNCTIONING OF EQUIPMENT WITH RESPECT TO EXPLOSION RISKS
10/30219405 DC : 0 BS EN 13617-1 - PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
03/313426 DC : DRAFT NOV 2003 IEC 62013-1 - CAPLIGHTS FOR USE IN MINES SUSCEPTIBLE TO FIREDAMP - PART 1: GENERAL REQUIREMENTS - CONSTRUCTION AND TESTING IN RELATION TO THE RISK OF EXPLOSION
CEI EN 60079-17 : 2015 EXPLOSIVE ATMOSPHERES - PART 17: ELECTRICAL INSTALLATIONS INSPECTION AND MAINTENANCE
BS EN ISO 13137:2013 Workplace atmospheres — Pumps for personal sampling of chemical and biological agents — Requirements and test methods
BS EN 1034-17:2012 Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Tissue making machines
BS ISO 18132-3:2011 Refrigerated hydrocarbon and nonpetroleum based liquefied gaseous fuels. General requirements for automatic tank gauges Automatic tank gauges for liquefied petroleum and chemical gases on board marine carriers and floating storage
09/30209043 DC : 0 BS EN 13922 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - OVERFILL PREVENTION SYSTEMS FOR LIQUID FUELS
I.S. EN 13616-2:2016 OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS - PART 2: OVERFILL PREVENTION DEVICES WITHOUT A CLOSURE DEVICE
I.S. EN 60034-30-1:2014 ROTATING ELECTRICAL MACHINES - PART 30-1: EFFICIENCY CLASSES OF LINE OPERATED AC MOTORS (IE CODE)
CEI EN 50050-1 : 2014 ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 1: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIALS
09/30182350 DC : 0 BS EN 12757-1:2005/A1 - MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
BS EN 50050-3:2013 Electrostatic hand-held spraying equipment. Safety requirements Hand-held spraying equipment for ignitable flock
IEC TS 60079-27:2002 Electrical apparatus for explosive gas atmospheres - Part 27: Fieldbus intrinsically safe concept (FISCO)
DIN EN 15268 E : 2008 PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION OF SUBMERSIBLE PUMP ASSEMBLIES
CEI EN 62282-3-100 : 2012 FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
04/30117615 DC : DRAFT AUG 2004 IEC 61310-2 - SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 2: REQUIREMENTS FOR MARKING
BS EN 15714-2:2009 Industrial valves. Actuators Electric actuators for industrial valves. Basic requirements
BS EN 62086-1:2005 Electrical apparatus for explosive gas atmospheres. Electrical resistance trace heating General and testing requirements
DIN EN 16191:2014-09 TUNNELLING MACHINERY - SAFETY REQUIREMENTS
13/30248785 DC : 0 BS EN 61800-2 - ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 2: GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR LOW VOLTAGE ADJUSTABLE FREQUENCY A.C. POWER DRIVE SYSTEMS
DIN EN ISO 13137 E : 2014 WORKPLACE ATMOSPHERES - PUMPS FOR PERSONAL SAMPLING OF CHEMICAL AND BIOLOGICAL AGENTS - REQUIREMENTS AND TEST METHODS (ISO 13137:2013)
17/30347443 DC : DRAFT JUN 2017 BS EN 12480 - GAS METERS - ROTARY DISPLACEMENT GAS METERS
NF EN 62086-2 : 2006 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ELECTRICAL RESISTANCE TRACE HEATING - PART 2: APPLICATION GUIDE FOR DESIGN, INSTALLATION AND MAINTENANCE
UNE-EN ISO 17621:2016 Workplace atmospheres - Short term detector tube measurement systems - Requirements and test methods (ISO 17621:2015)
07/30154511 DC : 0 BS ISO 18132-2 - REFRIGERATED LIGHT HYDROCARBON FLUIDS - GENERAL REQUIREMENTS FOR AUTOMATIC LEVELS GAUGES - PART 2: GAUGES IN REFRIGERATED-TYPE SHORE TANKS
02/204779 DC : DRAFT JULY 2002 IEC 61241-17 ED.1 - ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 17: INSPECTION AND MAINTENANCE OF ELECTRICAL INSTALLATIONS IN HAZARDOUS AREAS (OTHER THAN MINES)
UNE-EN ISO 16904:2016 Petroleum and natural gas industries - Design and testing of LNG marine transfer arms for conventional onshore terminals (ISO 16904:2016)
PD CEN/TR 16787:2014 Industrial Gas Installation. Guideline
04/30112677 DC : 0 IEC 61779-1 ED.2 - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
UNE-EN 60079-5:2016 Explosive atmospheres - Part 5: Equipment protection by powder filling "q"
BS EN 60034-30-1:2014 Rotating electrical machines Efficiency classes of line operated AC motors (IE code)
NF EN 60601-1 : 2007-01 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
07/30152812 DC : DRAFT AUG 2007 BS EN 50174-2 - INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS
BS ISO 12648:2006 Graphic technology. Safety requirements for printing press systems
BS EN 16191:2014 Tunnelling machinery. Safety requirements
04/30110212 DC : DRAFT MAR 2004 ISO 12648 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR PRINTING PRESS SYSTEMS
BS EN 45510-2-5:2002 Guide for the procurement of power station equipment. Electrical equipment Motors
BS ISO 14661:2000 Thermal turbines for industrial applications (steam turbines, gas expansion turbines). General requirements
BS EN 1012-3:2013 Compressors and vacuum pumps. Safety requirements Process compressors
DIN EN ISO 17621:2015-12 WORKPLACE ATMOSPHERES - SHORT TERM DETECTOR TUBE MEASUREMENT SYSTEMS - REQUIREMENTS AND TEST METHODS (ISO 17621:2015)
EN 60079-30-2:2017 Explosive atmospheres - Part 30-2: Electrical resistance trace heating - Application guide for design, installation and maintenance
PREN 16191 : DRAFT 2010 TUNNELLING MACHINERY - SAFETY REQUIREMENTS
CEI EN 60721-1 : 2003 CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - PART 1: ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES
08/30191891 DC : DRAFT OCT 2008 BS EN 61936-1 - POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES
CSA PLUS 2203 : 2001 HAZARDOUS LOCATIONS - GUIDE FOR THE DESIGN, TESTING, CONSTRUCTION, AND INSTALLATION OF EQUIPMENT IN EXPLOSIVE ATMOSPHERES
BS ISO 21789:2009 Gas turbine applications — Safety
14/30292850 DC : 0 BS EN 12779 - SAFETY OF WOODWORKING MACHINES - CHIPS AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATIONS - SAFETY REQUIREMENTS
CSA E60079.6 : 2002 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 6: OIL-IMMERSION "O"
I.S. EN 50628:2016 ERECTION OF ELECTRICAL INSTALLATIONS IN UNDERGROUND MINES
UNE-EN 60079-10-2:2016 Explosive atmospheres - Part 10-2: Classification of areas - Explosive dust atmospheres
BS ISO 15970 : 2008 NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR
BS EN 60721-1:1996 Classification of environmental conditions Environmental parameters and their severities
DIN EN 415-10:2014-07 SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
NF EN 1474-1 : 2009 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
I.S. EN 60079-10-1:2015 EXPLOSIVE ATMOSPHERES - PART 10-1: CLASSIFICATION OF AREAS - EXPLOSIVE GAS ATMOSPHERES
PREN 13617-3 : DRAFT 2010 PETROL FILLING STATIONS - PART 3: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SHEAR VALVES
PREN 12779 : DRAFT 2014 SAFETY OF WOODWORKING MACHINES - CHIPS AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATIONS - SAFETY REQUIREMENTS
PREN 12942 : DRAFT 2016 RESPIRATORY PROTECTIVE DEVICES - POWER FILTERING DEVICES INCORPORATING FULL FACE MASKS, HALF MASKS OR QUARTER MASKS - REQUIREMENTS, TESTING, MARKING
I.S. EN 16299:2013 CATHODIC PROTECTION OF EXTERNAL SURFACES OF ABOVE GROUND STORAGE TANK BASES IN CONTACT WITH SOIL OR FOUNDATIONS
ISO 4266:1994 Petroleum and liquid petroleum products — Measurement of temperature and level in storage tanks — Automatic methods
API 613:2003 SPECIAL PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES
IEC 60079-10-2:2015 RLV Explosive atmospheres - Part 10-2: Classification of areas - Explosive dust atmospheres
I.S. EN 60079-7:2015 EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E'
IEC 60335-2-69:2016 RLV Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for commercial use
NF EN 60079-30-2 : 2007 ELECTRICAL ATMOSPHERES - PART 2: ELECTRICAL RESISTANCE TRACE HEATING - APPLICATION GUIDE FOR DESIGN, INSTALLATION AND MAINTENANCE
I.S. EN 61158-2:2014 INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 2: PHYSICAL LAYER SPECIFICATION AND SERVICE DEFINITION
IEC TS 62642-7:2011 Alarm systems - Intrusion and hold-up systems - Part 7: Application guidelines
I.S. EN 50050-1:2013 ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 1: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIALS
I.S. EN 60079-29-2:2015 EXPLOSIVE ATMOSPHERES - PART 29-2: GAS DETECTORS - SELECTION, INSTALLATION, USE AND MAINTENANCE OF DETECTORS FOR FLAMMABLE GASES AND OXYGEN
S.R. CEN/CLC/TR 16832:2015&LC:2015 SELECTION, USE, CARE AND MAINTENANCE OF PERSONAL PROTECTIVE EQUIPMENT FOR PREVENTING ELECTROSTATIC RISKS IN HAZARDOUS AREAS (EXPLOSION RISKS)
I.S. EN 50050-2:2013 ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER
I.S. EN 12405-3:2015 GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
I.S. EN 15339-2:2007 THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 2: GAS CONTROL UNITS
BS EN 60079-29-4:2010 Explosive atmospheres Gas detectors. Performance requirements of open path detectors for flammable gases
NF EN 60079-25 : 2011 EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS
I.S. EN 60079-17:2014 EXPLOSIVE ATMOSPHERES - PART 17: ELECTRICAL INSTALLATIONS INSPECTION AND MAINTENANCE
I.S. EN 14236:2007 ULTRASONIC DOMESTIC GAS METERS
CSA C22.3 No. 61936-1 : 2008 POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES
I.S. EN 60601- 1:2006&A1:2013&AC:2014&A12:2014 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
UNI EN 415-10 : 2014 SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
BIS IS/IEC 60079-30-1 : 2007 EXPLOSIVE ATMOSPHERES - PART 30: ELECTRICAL RESISTANCE TRACE HEATING - SECTION 1: GENERAL AND TESTING REQUIREMENTS
I.S. EN 50174-3:2013 INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS
ISO/TS 19883:2017 Safety of pressure swing adsorption systems for hydrogen separation and purification
ISO/TS 20100:2008 Gaseous hydrogen Fuelling stations
CEI EN 60079-18 : 2016 EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M'
CEN/CLC/TR 16832:2015 Selection, use, care and maintenance of personal protective equipment for preventing electrostatic risks in hazardous areas (explosion risks)
BIS IS/IEC 60079-30-2 : 2007 EXPLOSIVE ATMOSPHERES - PART 30: ELECTRICAL RESISTANCE TRACE HEATING - SECTION 2: APPLICATION GUIDE FOR DESIGN, INSTALLATION AND MAINTENANCE
I.S. EN ISO 17621:2015 WORKPLACE ATMOSPHERES - SHORT TERM DETECTOR TUBE MEASUREMENT SYSTEMS - REQUIREMENTS AND TEST METHODS (ISO 17621:2015)
PREN 13160-1 : DRAFT 2014 LEAK DETECTION SYSTEMS - PART 1: GENERAL PRINCIPLES
IEC 60079-15:2017 Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
I.S. EN 60079-32-2:2015 EXPLOSIVE ATMOSPHERES - PART 32-2: ELECTROSTATICS HAZARDS - TESTS
CEI EN 60079-30-2 : 2008 EXPLOSIVE ATMOSPHERES - PART 30-2: ELECTRICAL RESISTANCE TRACE HEATING - APPLICATION GUIDE FOR DESIGN, INSTALLATION AND MAINTENANCE
BS EN 60079-15:2010 Explosive atmospheres Equipment protection by type of protection \'n\'
IEC 60839-1-1:1988 Alarm systems. Part 1: General requirements. Section One: General
IEC 61987-16:2016 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 16: List of properties (LOPs) for density measuring equipment for electronic data exchange
PREN 14116 : DRAFT 2011 TANKS FOR TRANSPORT OF DANGEROUS GOODS - DIGITAL INTERFACE FOR THE PRODUCT RECOGNITION DEVICE
ISO/PAS 19891-1:2016 Ships and marine technology Specifications for gas detectors intended for use on board ships Part 1: Portable gas detectors for atmosphere testing of enclosed spaces
UNE-EN ISO/IEC 80079-34:2012 Explosive atmospheres - Part 34: Application of quality systems for equipment manufacture
PREN 50174-3 : DRAFT 2012 INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS
PD IEC/TR 60601-4-3:2015 Medical electrical equipment Guidance and interpretation. Considerations of unaddressed safety aspects in the third edition of IEC 60601-1 and proposals for new requirements
BS EN 60079-30-1:2017 Explosive atmospheres Electrical resistance trace heating. General and testing requirements
UNI EN 16299 : 2013 CATHODIC PROTECTION OF EXTERNAL SURFACES OF ABOVE GROUND STORAGE TANK BASES IN CONTACT WITH SOIL OR FOUNDATIONS
EN 61936-1 : 2010 AMD 1 2014 POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES (IEC 61936-1:2010/A1:2014)
EN 12405-1:2005+A2:2010 Gas meters - Conversion devices - Part 1: Volume conversion
I.S. EN 60702-2:2002 MINERAL INSULATED CABLES AND THEIR TERMINATIONS WITH A RATED VOLTAGE NOT EXCEEDING 750 V - PART 2: TERMINATIONS
ISO 19372:2015 Microturbines applications — Safety
DIN EN 12921-1:2011-02 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements (includes Amendment A1:2010)
ISO 14661:2000 Thermal turbines for industrial applications (steam turbines, gas expansion turbines) General requirements
EN ISO/IEC 80079-38:2016 Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016)
ISO 16110-1:2007 Hydrogen generators using fuel processing technologies Part 1: Safety
IEC TS 60034-31:2010 Rotating electrical machines - Part 31: Selection of energy-efficient motors including variable speed applications - Application guide
IEC 61241-0:2004 Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements
I.S. EN 12261:2002 GAS METERS - TURBINE GAS METERS
IEC 60092-502:1999 Electrical installations in ships - Part 502: Tankers - Special features
IEC 61241-1-1:1999 Electrical apparatus for use in the presence of combustible dust - Part 1-1: Electrical apparatus protected by enclosures and surface temperature limitation - Specification for apparatus
I.S. EN 61310-2:2008 SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 2: REQUIREMENTS FOR MARKING
IEC 60335-2-69:2016 Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for commercial use
IEC 60079-26 REDLINE : 3ED 2014 EXPLOSIVE ATMOSPHERES - PART 26: EQUIPMENT WITH EQUIPMENT PROTECTION LEVEL (EPL) GA
ISO 21789:2009 Gas turbine applications — Safety
DIN EN 1710:2008-08 EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
EEMUA 186 : 2016 A PRACTITIONER'S HANDBOOK FOR POTENTIALLY EXPLOSIVE ATMOSPHERES
DIN EN 12583:2014-07 GAS INFRASTRUCTURE - COMPRESSOR STATIONS - FUNCTIONAL REQUIREMENTS
DIN EN 1953:2013-12 ATOMISING AND SPRAYING EQUIPMENT FOR COATING MATERIALS - SAFETY REQUIREMENTS
DIN EN 12312-5 E : 2009 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 5: AIRCRAFT FUELLING EQUIPMENT
DIN EN 12050-1:2015-05 WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 1: LIFTING PLANTS FOR WASTEWATER CONTAINING FAECAL MATTER
IEC 60079-11:2011 RLV Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
IEC 61158-2:2014 Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition
UNE-EN 60079-14:2016 Explosive atmospheres - Part 14: Electrical installations design, selection and erection
12/30264905 DC : 0 BS EN 61158-2 - INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 2: PHYSICAL LAYER SPECIFICATION AND SERVICE DEFINITION
UNE-EN 1755:2016 Industrial Trucks - Safety requirements and verification - Supplementary requirements for operation in potentially explosive atmospheres
BS EN 13012:2012 Petrol filling stations. Construction and performance of automatic nozzles for use on fuel dispensers
BS EN 1010-1 : 2004 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS
08/30190078 DC : DRAFT SEP 2008 BS ISO 26142 - HYDROGEN DETECTOR
IEC 61241-14:2004 Electrical apparatus for use in the presence of combustible dust - Part 14: Selection and installation
BS EN 12921-3 : 2005 MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 3: SAFETY OF MACHINES USING FLAMMABLE CLEANING LIQUIDS
BS EN 12215 : 2004 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
BS EN 12312-5 : 2005 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 5: AIRCRAFT FUELLING EQUIPMENT
IEC 60079-11 REDLINE : 6.0 EXPLOSIVE ATMOSPHERES - PART 11: EQUIPMENT PROTECTION BY INTRINSIC SAFETY 'I'
IEC 61987-13:2016 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 13: Lists of properties (LOP) for pressure measuring equipment for electronic data exchange
UNE-EN 14678-1:2013 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers
UNE-EN 60825-1:2015 Safety of laser products - Part 1: Equipment classification and requirements
I.S. EN 13922:2011 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - OVERFILL PREVENTION SYSTEMS FOR LIQUID FUELS
ISO 16904:2016 Petroleum and natural gas industries Design and testing of LNG marine transfer arms for conventional onshore terminals
BS EN 12753 : 2005 THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS
IEC 61241-17:2005 Electrical apparatus for use in the presence of combustible dust - Part 17: Inspection and maintenance of electrical installations in hazardous areas (other than mines)
BS EN 60079-14:2014 Explosive atmospheres Electrical installations design, selection and erection
UNE-EN 60079-11:2013 Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
04/30106146 DC : DRAFT MARCH 2004 BS EN 60601-1 - MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
IEC 62282-5-1:2012 Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety
OVE/ONORM EN 62282-3-100 : 2013 FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-3-100:2012)
I.S. EN 60825-1:2014 SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS
CSA M421 : 2011 : R2016 USE OF ELECTRICITY IN MINES
UNE-EN 60601-1:2008 Medical electrical equipment -- Part 1: General requirements for basic safety and essential performance
ONORM EN ISO/IEC 80079-34 : 2013 EXPLOSIVE ATMOSPHERES - PART 34: APPLICATION OF QUALITY SYSTEMS FOR EQUIPMENT MANUFACTURE (ISO/IEC 80079-34:2011, MODIFIED)
UNI EN 13922 : 2011 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - OVERFILL PREVENTION SYSTEMS FOR LIQUID FUELS
EN 1474-1:2008 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 1: Design and testing of transfer arms
UNI EN 13617-1 : 2012 PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
EN 16299:2013 Cathodic protection of external surfaces of above ground storage tank bases in contact with soil or foundations
EN 14678-1:2013 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers
EN 137:2006 Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with full face mask - Requirements, testing, marking
UNI EN 12921-1 : 2010 MACHINES FOR SURFACE CLEANING AND PRE- TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS
UNI EN 15207 : 2015 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - PLUG/SOCKET CONNECTION AND SUPPLY CHARACTERISTICS FOR SERVICE EQUIPMENT IN HAZARDOUS AREAS WITH 24 V NOMINAL SUPPLY VOLTAGE
UNI EN 14677 : 2008 SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL
UNI EN 12581 : 2010 COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
UNI EN 1010-1 : 2011 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS
UNI EN 12942 : 2009 RESPIRATORY PROTECTIVE DEVICES - POWER ASSISTED FILTERING DEVICES INCORPORATING FULL FACE MASKS, HALF MASKS OR QUARTER MASKS - REQUIREMENTS, TESTING, MARKING
UNI EN 12941 : 2009 RESPIRATORY PROTECTIVE DEVICES - POWERED FILTERING DEVICES INCORPORATING A HELMET OR A HOOD - REQUIREMENTS, TESTING, MARKING
UNI EN 13463-1 : 2009 NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS
UNI EN 12981 : 2009 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
UNI EN 1012-3 : 2014 COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS
UNI EN 12757-1 : 2010 MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
CSA E60079.14 : 2002 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ELECTRICAL INSTALLATIONS IN EXPLOSIVE GAS ATMOSPHERES (OTHER THAN MINES)
UNI EN 1953 : 2013 Atomising and spraying equipment for coating materials - Safety requirements
UNI EN 14591-4 : 2008 EXPLOSION PREVENTION AND PROTECTION IN UNDERGROUND MINES - PROTECTIVE SYSTEMS - PART 4: AUTOMATIC EXTINGUISHING SYSTEMS FOR ROAD HEADERS
UNI EN 12753 : 2010 THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS
UNI EN 14492-2 : 2009 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
UNI EN 1248 : 2009 FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR ABRASIVE BLASTING EQUIPMENT
UNI EN 1710 : 2008 EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
UNI EN 14678-1 : 2013 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
UNI EN 13355 : 2009 COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
UNI EN 12215 : 2010 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
UNI EN 14492-1 : 2009 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
UNI EN 12921-3 : 2009 MACHINES FOR SURFACE CLEANING AND PRE- TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 3: SAFETY OF MACHINES USING FLAMMABLE CLEANING LIQUIDS
UNI EN 12621 : 2010 MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
UNI EN 12583 : 2014 GAS INFRASTRUCTURE - COMPRESSOR STATIONS - FUNCTIONAL REQUIREMENTS
UNI EN 14681 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES
UNE-EN 50223:2016 Stationary electrostatic application equipment for ignitable flock material - Safety requirements
08/30183108 DC : DRAFT MAY 2008 BS IEC/TS 60034-31 - ROTATING ELECTRICAL MACHINES - PART 31: GUIDE FOR THE SELECTION AND APPLICATION OF ENERGY-EFFICIENT MOTORS INCLUDING VARIABLE-SPEED APPLICATIONS
I.S. EN 62952-1:2016 POWER SOURCES FOR A WIRELESS COMMUNICATION DEVICE - PART 1: GENERAL REQUIREMENTS OF POWER MODULES
I.S. EN 45510-2-5:2002 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-5: ELECTRICAL EQUIPMENT - MOTORS
DIN EN ISO/IEC 80079-38 E : 2017 EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079-38:2016)
BS EN 50176:2009 Stationary electrostatic application equipment for ignitable liquid coating material. Safety requirements
17/30342922 DC : 0 BS EN 61987-92 - INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 92: LISTS OF PROPERTIES (LOP) OF MEASURING EQUIPMENT FOR ELECTRONIC DATA EXCHANGE - ASPECT LOPS
12/30258747 DC : DRAFT MAR 2012 BS EN 12583 - GAS INFRASTRUCTURE - COMPRESSOR STATIONS - FUNCTIONAL REQUIREMENTS
UNE-EN ISO 8846:2017 Small craft - Electrical devices - Protection against ignition of surrounding flammable gases (ISO 8846:1990)
04/30113665 DC : DRAFT MAY 2004 IEC 60079-19 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 19: REPAIR AND OVERHAUL FOR APPARATUS USED IN EXPLOSIVE ATMOSPHERES (OTHER THAN EXPLOSIVES)
I.S. EN 13463-1:2009 NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS
DIN EN 1474-1:2009-03 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
04/30112683 DC : 0 IEC 61779-6 ED.2 - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 6: GUIDE FOR THE SELECTION, INSTALLATION, USE AND MAINTENANCE OF APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES
DIN EN 16191 E : 2014 TUNNELLING MACHINERY - SAFETY REQUIREMENTS
NF EN 60079-29-2 : 2008 EXPLOSIVE ATMOSPHERES - PART 29-2: GAS DETECTORS - SELECTION, INSTALLATION, USE AND MAINTENANCE OF DETECTORS FOR FLAMMABLE GASES AND OXYGEN
CSA C22.4 PACKAGE : 2009 CONSISTS OF C22.4 NO. 1-09, OBJECTIVE-BASED INDUSTRIAL ELECTRICAL CODE AND C22.4 NO. 2-09, OBJECTIVE-BASED INDUSTRIAL ELECTRICAL CODE - SAFETY MANAGEMENT SYSTEM REQUIREMENTS
BS EN 61241-11:2006 Electrical apparatus for use in the presence of combustible dust Protection by intrinsic safety \'iD\'
UNE-EN 60079-13:2011 Explosive atmospheres - Part 13: Equipment protection by pressurized room "p"
BS EN 60034-30:2009 Rotating electrical machines Efficiency classes of single-speed, three-phase, cage-induction motors (IE-code)
CEN/TR 15339-3:2014 Thermal spraying - Safety requirements for thermal spraying equipment - Part 3: Torches for thermal spraying and their connection and supply units
PREN 14236 : DRAFT 2017 ULTRASONIC DOMESTIC GAS METERS
BS IEC 60092-201:1994 Electrical installation in ships System design. General
UNE-EN 62282-3-1:2011 Fuel cell technologies - Part 3-1: Stationary fuel cell power systems - Safety
BS EN 60079-13:2017 Explosive atmospheres Equipment protection by pressurized room \'p\' and artificially ventilated room \'v\'
PD ISO/TR 9464:2008 Guidelines for the use of ISO 5167:2003
EN 15714-2:2009 Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements
PREN 50050-3 : DRAFT 2011 ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 3: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE FLOCK
I.S. EN 60079-30-1:2017 EXPLOSIVE ATMOSPHERES - PART 30-1: ELECTRICAL RESISTANCE TRACE HEATING - GENERAL AND TESTING REQUIREMENTS
PREN 50050-2 : DRAFT 2011 ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER
BS ISO 18132-1:2011 Refrigerated hydrocarbon and nonpetroleum based liquefied gaseous fuels. General requirements for automatic tank gauges Automatic tank gauges for liquefied natural gas on board marine carriers and floating storage
14/30267384 DC : 0 BS EN 60079-30-1 ED 1.0 - EXPLOSIVE ATMOSPHERES - PART 30-1: ELECTRICAL RESISTANCE TRACE HEATING - GENERAL; TYPE TESTING AND DESIGN REQUIREMENTS
BS EN 12405-3:2015 Gas meters. Conversion devices Flow computer
12/30229938 DC : 0 BS IEC 61577-2 ED 2.0 - RADIATION PROTECTION INSTRUMENTATION - RADON AND RADON DECAY PRODUCT MEASURING INSTRUMENTS - PART 2: SPECIFIC REQUIREMENTS FOR [222]RN AND [220]RN MEASURING INSTRUMENTS
I.S. EN 60079-2:2014 EXPLOSIVE ATMOSPHERES - PART 2: EQUIPMENT PROTECTION BY PRESSURIZED ENCLOSURE 'P'
CEI EN 60034-30 : 2011 ROTATING ELECTRICAL MACHINES - PART 30: EFFICIENCY CLASSES OF SINGLE-SPEED, THREE-PHASE, CAGE-INDUCTION MOTORS (IE CODE)
14/30264811 DC : 0 BS EN 62798 ED 1.0 - INDUSTRIAL ELECTROHEATING EQUIPMENT - TEST METHODS FOR INFRARED EMITTERS
08/30190505 DC : 0 BS ISO 12643-1 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
UNI EN 15714-2 : 2009 INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS
12/30268608 DC : 0 BS EN 60079-17/ED 5 - EXPLOSIVE ATMOSPHERES - PART 17: ELECTRICAL INSTALLATIONS INSPECTION AND MAINTENANCE
BS ISO 13689:2001 Refrigerated light hydrocarbon fluids. Measurement of liquid levels in tanks containing liquefied gases. Microwave-type level gauge
13/30286135 DC : 0 BS EN 13616-1 - OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS - REQUIREMENTS AND TEST/ASSESSMENT METHODS - PART 1: OVERFILL PREVENTION DEVICES WITH CLOSURE DEVICE
I.S. EN 13616-1:2016 OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS -PART 1: OVERFILL PREVENTION DEVICES WITH CLOSURE DEVICE
10/30219408 DC : 0 BS EN 13617-2 - PETROL FILLING STATIONS - PART 2: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SAFE BREAKS FOR USE ON METERING PUMPS AND DISPENSERS
BS EN 415-10:2014 Safety of packaging machines General Requirements
CEN/TR 16832 : 2015 COR 2015 SELECTION, USE, CARE AND MAINTENANCE OF PERSONAL PROTECTIVE EQUIPMENT FOR PREVENTING ELECTROSTATIC RISKS IN HAZARDOUS AREAS (EXPLOSION RISKS)
11/30248845 DC : 0 BS EN 50050-2:2011 - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER
04/30068318 DC : DRAFT APR 2004 IEC 62086-2 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ELECTRICAL RESISTANCE TRACE HEATING - PART 2: APPLICATION GUIDE FOR DESIGN, INSTALLATION AND MAINTENANCE
06/30127203 DC : DRAFT OCT 2006 ISO 15138 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - HEATING, VENTILATION AND AIR CONDITIONING
EN 14116:2012+A1:2014 Tanks for transport of dangerous goods - Digital interface for product recognition devices for liquid fuels
CEI EN 62952-1 : 1ED 2017 POWER SOURCES FOR A WIRELESS COMMUNICATION DEVICE - PART 1: GENERAL REQUIREMENTS OF POWER MODULES
UNI EN ISO 13297 : 2015 SMALL CRAFT - ELECTRICAL SYSTEMS - ALTERNATING CURRENT INSTALLATIONS
PREN 1755 : DRAFT 2013 SAFETY OF INDUSTRIAL TRUCKS - OPERATION IN POTENTIALLY EXPLOSIVE ATMOSPHERES - USE IN FLAMMABLE GAS, VAPOUR, MIST AND DUST
BS EN 1474-1:2008 Installation and equipment for liquefied natural gas. Design and testing of marine transfer systems Design and testing of transfer arms
UNE-EN ISO 15970:2014 Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor (ISO 15970:2008)
10/30219411 DC : 0 BS EN 13617-3 - PETROL FILLING STATIONS - PART 3: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SHEAR VALVES
13/30267448 DC : 0 BS EN 60079-6 ED 4.0 - EXPLOSIVE ATMOSPHERES - PART 6: EQUIPMENT PROTECTION BY LIQUID IMMERSION 'O'
I.S. EN 50174-2:2009 INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS
08/30175652 DC : DRAFT SEP 2008 BS EN 1248 AMD1 - FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR ABRASIVE BLASTING EQUIPMENT
API 677 : 2006 : R2016 GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES
DIN EN 1034-17 E : 2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES
PD IEC/TS 60079-46:2017 Explosive atmospheres Equipment assemblies
13/30278077 DC : 0 BS EN ISO 16904 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND TESTING OF LNG MARINE TRANSFER ARMS FOR CONVENTIONAL ONSHORE TERMINALS
BS EN 50495:2010 Safety devices required for the safe functioning of equipment with respect to explosion risks
DIN EN 12405-3 E : 2016 GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
04/30105027 DC : DRAFT JUNE 2004 ISO 21789 - GAS TURBINES - SAFETY
CEI UNI EN 45510-2-5 : 2006 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-5: ELECTRICAL EQUIPMENT - MOTORS
BS EN 62952-1:2016 Power sources for a wireless communication device General requirements of power modules
04/30123544 DC : DRAFT OCT 2004 IEC 60079-1 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 1: FLAMEPROOF ENCLOSURES 'D'
DIN EN 15268:2008-11 PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION OF SUBMERSIBLE PUMP
DIN EN 1034-17:2012-11 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 17: Tissue making machines
BS EN ISO 17621:2015 Workplace atmospheres. Short term detector tube measurement systems. Requirements and test methods
UNE-EN 13175:2015 LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings
BS EN 13616-1:2016 Overfill prevention devices for static tanks for liquid fuels Overfill prevention devices with closure device
UNE-EN 60079-30-1:2017 Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements
BS EN 60079-10-1:2015 Explosive atmospheres Classification of areas. Explosive gas atmospheres
09/30194936 DC : DRAFT JAN 2009 BS EN ISO 28460 - PETROLEUM AND NATURAL GAS INDUSTRIES - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - SHIP-TO-SHORE INTERFACE AND PORT OPERATIONS
API 677 :2006 GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES
BS 7527-1:1991 Classification of environmental conditions. Environmental conditions appearing in nature Environmental parameters and their severities
CSA E60079.2 : 2002 : R2011 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ELECTRICAL APPARATUS - TYPE OF PROTECTION "p"
BS EN 60079-2:2014 Explosive atmospheres Equipment protection by pressurized enclosure \'p\'
BIS IS/IEC 60079-1 : 2007 EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D'
ANSI/CSA FC 1:2014 FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
BS 7701:1993 Specification for float-type level gauges for measuring liquid levels in tanks containing refrigerated light-hydrocarbon fluids
06/30149534 DC : DRAFT APR 2006 IEC 60079-27 - EXPLOSIVE ATMOSPHERES - PART 27: FIELDBUS INTRINSICALLY SAFE CONCEPT (FISCO)
BIS IS/IEC 60079-26 : 2006 EXPLOSIVE ATMOSPHERES - PART 26: EQUIPMENT WITH EQUIPMENT PROTECTION LEVEL (EPL) GA
UNE-EN 60079-25:2017 Explosive atmospheres -- Part 25: Intrinsically safe electrical systems
API 616 REDLINE : 2011 GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
UNI EN 1127-1 : 2011 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
ISO 15138:2007 Petroleum and natural gas industries Offshore production installations Heating, ventilation and air-conditioning
CSA E60079.5 : 2002 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - SAND-FILLED APPARATUS
UNE-EN 16299:2013 Cathodic protection of external surfaces of above ground storage tank bases in contact with soil or foundations
CSA E60079.2:2002 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ELECTRICAL APPARATUS - TYPE OF PROTECTION "p"
BS EN ISO 15138:2007 Petroleum and natural gas industries. Offshore production installations. Heating, ventilation and air-conditioning
PREN 13617-2 : DRAFT 2010 PETROL FILLING STATIONS - PART 2: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SAFE BREAKS FOR USE ON METERING PUMPS AND DISPENSERS
BS EN ISO 13297:2014 Small craft. Electrical systems. Alternating current installations
EEMUA 209 : 2015 GUIDE TO THE DEVELOPMENT AND IMPLEMENTATION OF ON-LINE ANALYSER APPLICATIONS
IEC 60695-1-10 REDLINE : 2ED 2016 FIRE HAZARD TESTING - PART 1-10: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - GENERAL GUIDELINES
CEI CLC/TR 50427 : 2005 ASSESSMENT OF INADVERTENT IGNITION OF FLAMMABLE ATMOSPHERES BY RADIO-FREQUENCY RADIATION - GUIDE
I.S. HD 60364-5-54:2011 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-54: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - EARTHING ARRANGEMENTS AND PROTECTIVE CONDUCTORS
I.S. EN 61784-5-3:2013 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 5-3: INSTALLATION OF FIELDBUSES - INSTALLATION PROFILES FOR CPF 3
BS PD IEC TS 60079-32-1 : 2013 EXPLOSIVE ATMOSPHERES - PART 32-1: ELECTROSTATIC HAZARDS, GUIDANCE
I.S. EN 61241-17:2005 ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 17: INSPECTION AND MAINTENANCE OF ELECTRICAL INSTALLATIONS IN HAZARDOUS AREAS (OTHER THAN MINES)
ISA 61241-1 : 2006 ELECTRICAL APPARATUS FOR USE IN ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS - PROTECTION BY ENCLOSURES "TD"
BS EN 60702-2 : 2002 MINERAL INSULATED CABLES AND THEIR TERMINATIONS WITH A RATED VOLTAGE NOT EXCEEDING 750 V - PART 2: TERMINATIONS
CEI UNI EN ISO/IEC 80079-34 : 2013 EXPLOSIVE ATMOSPHERES - PART 34: APPLICATION OF QUALITY SYSTEMS FOR EQUIPMENT MANUFACTURE
EN 50174-3:2013/A1:2017 INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS
I.S. EN 1127-1:2011 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
I.S. EN 14677:2008 SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL
ISO 12648:2006 Graphic technology Safety requirements for printing press systems
I.S. EN 62282-3-100:2012 FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-3-100:2012 (EQV))
I.S. EN 16191:2014 TUNNELLING MACHINERY - SAFETY REQUIREMENTS
I.S. EN 60695-1-10:2017 FIRE HAZARD TESTING - PART 1-10: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - GENERAL GUIDELINES
S.R. HD 60364-5-54:2011 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-54: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - EARTHING ARRANGEMENTS AND PROTECTIVE CONDUCTORS
I.S. EN ISO/IEC 80079-38:2016 EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC/DIS 80079-38:2012)
I.S. EN 50104:2010 ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF OXYGEN - PERFORMANCE REQUIREMENTS AND TEST METHODS
ISO 13297:2014 Small craft Electrical systems Alternating current installations
I.S. EN ISO 80079-37:2016 EXPLOSIVE ATMOSPHERES - PART 37: NON-ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES - NON-ELECTRICAL TYPE OF PROTECTION CONSTRUCTIONAL SAFETY ''C'', CONTROL OF IGNITION SOURCES ''B'', LIQUID IMMERSION ''K'' (ISO/DIS 80079-37:2014)
I.S. EN 61987-14:2016 INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 14: LISTS OF PROPERTIES (LOP) FOR TEMPERATURE MEASURING EQUIPMENT FOR ELECTRONIC DATA EXCHANGE
I.S. EN 45544-1:2015 WORKPLACE ATMOSPHERES - ELECTRICAL APPARATUS USED FOR THE DIRECT DETECTION AND DIRECT CONCENTRATION MEASUREMENT OF TOXIC GASES AND VAPOURS - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
PREN 15207 : DRAFT 2012 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - PLUG/SOCKET CONNECTION AND SUPPLY CHARACTERISTICS FOR SERVICE EQUIPMENT IN HAZARDOUS AREAS WITH 24 V NOMINAL SUPPLY VOLTAGE
PREN 12050-1 : DRAFT 2012 WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 1: LIFTING PLANTS FOR WASTEWATER CONTAINING FAECAL MATTER
GOST R 52350.15 : 2005 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 15: CONSTRUCTION, TEST AND MARKING OF TYPE OF PROTECTION "N" ELECTRICAL APPARATUS
S.R. CEN/TR 15339-3:2014 THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 3: TORCHES FOR THERMAL SPRAYING AND THEIR CONNECTION AND SUPPLY UNITS
UNE-EN ISO 80079-37:2018 Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical type of protection constructional safety 'c', control of ignition sources 'b', liquid immersion 'k' (ISO 80079-37:2016)
BIS IS/IEC 60079-28 : 2006 EXPLOSIVE ATMOSPHERES - PART 28: PROTECTION OF EQUIPMENT AND TRANSMISSION SYSTEMS USING OPTICAL RADIATION
UNE-EN ISO 13297:2015 Small craft - Electrical systems - Alternating current installations (ISO 13297:2014)
CEI EN 60079-29-2 : 2016 EXPLOSIVE ATMOSPHERES - PART 29-2: GAS DETECTORS - SELECTION, INSTALLATION, USE AND MAINTENANCE OF DETECTORS FOR FLAMMABLE GASES AND OXYGEN
CLC/TS 50131-7:2010 Alarm systems - Intrusion and hold-up systems - Part 7: Application guidelines
EN ISO 15138:2007 Petroleum and natural gas industries - Offshore production installations - Heating, ventilation and air-conditioning (ISO 15138:2007)
UNE-EN 50050-1:2014 Electrostatic hand-held spraying equipment - Safety requirements - Part 1: Hand-held spraying equipment for ignitable liquid coating materials
DIN EN 12753:2011-02 Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements (includes Amendment A1:2010)
I.S. EN 61936-1:2010 POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES
UNE-EN 14116:2013 Tanks for transport of dangerous goods - Digital interface for product recognition devices for liquid fuels
I.S. EN 60079-6:2015 EXPLOSIVE ATMOSPHERES - PART 6: EQUIPMENT PROTECTION BY LIQUID IMMERSION 'O'
ISO/TR 9464:2008 Guidelines for the use of ISO 5167:2003
IEC 60079-11:2011 Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
DIN EN 12757-1:2011-02 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing (includes Amendment A1:2010)
EN 12480:2018 Gas meters - Rotary displacement gas meters
IEC 60079-5 REDLINE : 4ED 2015 EXPLOSIVE ATMOSPHERES - PART 5: EQUIPMENT PROTECTION BY POWDER FILLING 'Q'
IEC 60079-29-2 REDLINE : 2ED 2015 EXPLOSIVE ATMOSPHERES - PART 29-2: GAS DETECTORS - SELECTION, INSTALLATION, USE AND MAINTENANCE OF DETECTORS FOR FLAMMABLE GASES AND OXYGEN
IEC TS 60079-40:2015 Explosive atmospheres - Part 40: Requirements for process sealing between flammable process fluids and electrical systems
IEC 60050-426:2008 International Electrotechnical Vocabulary (IEV) - Part 426: Equipment for explosive atmospheres
I.S. EN 12405-1:2005 GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
I.S. EN 61241-0:2006 ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 0: GENERAL REQUIREMENTS
IEC 60364-5-54:2011 Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors
BS EN 14593-1:2005 Respiratory protective devices. Compressed air line breathing apparatus with demand valve Apparatus with a full mask. Requirements, testing, marking
I.S. EN 12480:2018 GAS METERS - ROTARY DISPLACEMENT GAS METERS
IEC 62657-1:2017 Industrial communication networks - Wireless communication networks - Part 1: Wireless communication requirements and spectrum considerations
IEC 61892-7:2014 Mobile and fixed offshore units - Electrical installations - Part 7: Hazardous areas
IEC 60079-6:2015 Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o"
EN 13922:2011 Tanks for transport of dangerous goods - Service equipment for tanks - Overfill prevention systems for liquid fuels
DIN EN 13012:2012-09 Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers
DIN EN 14797 E : 2007 EXPLOSION VENTING DEVICES
DIN EN 61158-2:2015-02 INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 2: PHYSICAL LAYER SPECIFICATION AND SERVICE DEFINITION (IEC 61158-2:2014)
BS EN 50628:2016 Erection of electrical installations in underground mines
09/30214292 DC : 0 BS EN 60079-35-1 - CAPLIGHTS FOR USE IN MINES SUSCEPTIBLE TO FIREDAMP - PART 1: GENERAL REQUIREMENTS - CONSTRUCTION AND TESTING IN RELATION TO THE RISK OF EXPLOSION
BS EN 12050-1:2015 Wastewater lifting plants for buildings and sites Lifting plants for wastewater containing faecal matter
BS EN ISO 13691:2002 Petroleum and natural gas industries. High-speed special-purpose gear units
IEC 62013-1:2005 Caplights for use in mines susceptible to firedamp - Part 1: General requirements - Construction and testing in relation to the risk of explosion
IEC 62052-31:2015 Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 31: Product safety requirements and tests
BS EN 60601-1 : 2006 MEDICAL ELECTRICAL EQUIPMENT PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
UNE-EN 12621:2006 Machinery for the supply and circulation of coating materials under pressure - Safety requirements
13/30277685 DC : 0 BS EN 60519-1 - SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS
13/30276640 DC : 0 BS EN 62282-4-101 ED 1.0 - FUEL CELL TECHNOLOGIES - PART 4-101: FUEL CELL POWER SYSTEMS FOR PROPULSION FOR OTHER THAN ROAD VEHICLES AND AUXILIARY POWER UNITS - FUEL CELL POWER SYSTEMS FOR ELECTRICALLY POWERED INDUSTRIAL TRUCKS - SAFETY
BS EN 14116 : 2012 TANKS FOR TRANSPORT OF DANGEROUS GOODS - DIGITAL INTERFACE FOR PRODUCT RECOGNITION DEVICES FOR LIQUID FUELS
BS EN 60079-11:2012 Explosive atmospheres Equipment protection by intrinsic safety \'i\'
BS EN 12583:2014 Gas Infrastructure. Compressor stations. Functional requirements
IEC 60079-30-1:2007 Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements
DIN EN 15207 E : 2015 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - PLUG/SOCKET CONNECTION AND SUPPLY CHARACTERISTICS FOR SERVICE EQUIPMENT IN HAZARDOUS AREAS WITH 24 V NOMINAL SUPPLY VOLTAGE
IEC 61241-1:2004 Electrical apparatus for use in the presence of combustible dust - Part 1: Protection by enclosures "tD"
ISO 26142:2010 Hydrogen detection apparatus Stationary applications
BS EN 1804-3 : 2006 MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 3: HYDRAULIC CONTROL SYSTEMS
IEC 60079-27:2008 Explosive atmospheres - Part 27: Fieldbus intrinsically safe concept (FISCO)
IEC 60079-25:2010 Explosive atmospheres - Part 25: Intrinsically safe electrical systems
IEC 60079-30-2:2007 Explosive atmospheres - Part 30-2: Electrical resistance trace heating - Application guide for design, installation and maintenance
UNE-EN 60079-6:2016 Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o"
ISO/IEC 80079-34:2011 Explosive atmospheres Part 34: Application of quality systems for equipment manufacture
BS EN 61784-5-3:2013 Industrial communication networks. Profiles Installation of fieldbuses. Installation profiles for CPF 3
BS EN 62282-4-101:2014 Fuel cell technologies Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Safety of electrically powered industrial trucks
BS EN 14236:2007 Ultrasonic domestic gas meters
BS EN 13617-1:2012 Petrol filling stations Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
05/30138005 DC : DRAFT AUG 2005 IEC 60079-14 ED 4 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS IN HAZARDOUS AREAS (OTHER THAN MINES)
BS EN 12621 : 2006 MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
12/30276304 DC : 0 BS EN 61892-7 ED 3.0 - MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 7: HAZARDOUS AREAS
17/30361391 DC : 0 BS EN 50174-2 - INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS
BS EN 12779:2015 Safety of woodworking machines. Chip and dust extraction systems with fixed installation. Safety requirements
BS EN 15339-2:2007 Thermal spraying. Safety requirements for thermal spraying equipment Gas control units
BS EN 15207:2014 Tanks for the transport of dangerous goods. Plug/socket connection and supply characteristics for service equipment in hazardous areas with 24 V nominal supply voltage
UNE-EN 13160-3:2017 Leak detection systems - Part 3: Requirements and test/assessment methods for liquid systems for tanks
UNE-EN 1539:2010 Dryers and ovens, in which flammable substances are released - Safety requirements
IEC 62086-1:2001 Electrical apparatus for explosive gas atmospheres - Electrical resistance trace heating - Part 1: General and testing requirements
BS EN 60079-35-1:2011 Household and similar electrical appliances - Safety - Part 2-82: Particular requirements for amusement machines and personal service machines
IEC 62282-4-101:2014 Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks
EN ISO/IEC 80079-34:2011 Explosive atmospheres - Part 34: Application of quality systems for equipment manufacture (ISO/IEC 80079-34:2011)
BS ISO 19372:2015 Microturbines applications. Safety
08/30175787 DC : DRAFT JAN 2008 BS EN 60079-11 - EXPLOSIVE ATMOSPHERES - PART 11: EQUIPMENT PROTECTION BY INTRINSIC SAFETY "I"
11/30211394 DC : DRAFT MAR 2011 BS ISO 20100 - GASEOUS HYDROGEN - FUELLING STATIONS
BS EN 13237:2012 Potentially explosive atmospheres. Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres
IEC 61241-11:2005 Electrical apparatus for use in the presence of combustible dust - Part 11: Protection by intrinsic safety 'iD'
IEC 60079-5:2015 RLV Explosive atmospheres - Part 5: Equipment protection by powder filling "q"
UNE-EN 13012:2012 Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers
UNE-EN 62282-5-1:2013 Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety
IEC 61310-2:2007 Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
IEC 60079-31:2013 Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t"
BS EN 1248 : 2001 FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR ABRASIVE BLASTING EQUIPMENT
BS EN 14492-1 : 2006 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
UNE-EN 13617-1:2012 Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
ISO 17621:2015 Workplace atmospheres Short term detector tube measurement systems Requirements and test methods
ISO 13691:2001 Petroleum and natural gas industries — High-speed special-purpose gear units
UNE-ISO 16110-1:2015 Hydrogen generators using fuel processing technologies -- Part 1: Safety
IEC 60079-29-2:2015 RLV Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen
IEC 60825-1:2014 Safety of laser products - Part 1: Equipment classification and requirements
ISO 22734-2:2011 Hydrogen generators using water electrolysis process Part 2: Residential applications
ISO 13137:2013 Workplace atmospheres — Pumps for personal sampling of chemical and biological agents — Requirements and test methods
IEC 60702-2:2002+AMD1:2015 CSV Mineral insulated cables and their terminations with a rated voltagenot exceeding 750 V - Part 2: Terminations
ISO 80079-37:2016 Explosive atmospheres Part 37: Non-electrical equipment for explosive atmospheres Non-electrical type of protection constructional safety 'c', control of ignition sources 'b', liquid immersion 'k'
IEC 62282-3-100:2012 Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety
IEC 60079-10-1:2015 Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres
PD CLC/TR 60079-33:2015 Explosive atmospheres Equipment protection by special protection \'s\'
BS EN 1710 : 2005 EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
BS EN 61936-1 : 2010 POWER INSTALLATIONS EXCEEDING 1 KV A.C - PART 1: COMMON RULES
BS EN 378-3:2016 Refrigerating systems and heat pumps. Safety and environmental requirements Installation site and personal protection
BS IEC 60079-33 : 2012 EXPLOSIVE ATMOSPHERES - PART 33: EQUIPMENT PROTECTION BY SPECIAL PROTECTION 'S'
IEC 60079-19:2010+AMD1:2015 CSV Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation
IEC 60079-35-1:2011 Explosive atmospheres - Part 35-1: Caplights for use in mines susceptible to firedamp - General requirements - Construction and testing in relation to the risk of explosion
UNE-EN 61936-1:2012 Power installations exceeding 1 kV a.c. -- Part 1: Common rules
BS EN 12941 : 1999 RESPIRATORY PROTECTIVE DEVICES - POWERED FILTERING DEVICES INCORPORATING A HELMET OR A HOOD - REQUIREMENTS, TESTING, MARKING
UNE-EN 12050-1:2015 Wastewater lifting plants for buildings and sites - Part 1: Lifting plants for wastewater containing faecal matter
09/30150663 DC : 0 BS ISO 22734-2 - HYDROGEN GENERATORS USING WATER ELECTROLYSIS PROCESS - PART 2: RESIDENTIAL APPLICATIONS
13/30271432 DC : 0 BS EN 60079-18 ED 4.0 - EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M'
BS EN 13922:2011 Tanks for transport of dangerous goods. Service equipment for tanks. Overfill prevention systems for liquid fuels
IEC 61987-14:2016 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 14: Lists of properties (LOP) for temperature measuring equipment for electronic data exchange
BS EN 62052-31:2016 Electricity metering equipment (AC). General requirements, tests and test conditions Product safety requirements and tests
BS ISO 22734-2:2011 Hydrogen generators using water electrolysis process Residential applications
UNE-EN 13463-1:2011 Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements
BS EN 1539:2015 Dryers and ovens, in which flammable substances are released. Safety requirements
IEC 61285:2015 Industrial-process control - Safety of analyser houses
UNE-EN 60079-2:2015 Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p"
UNE-EN 13922:2012 Tanks for transport of dangerous goods - Service equipment for tanks - Overfill prevention systems for liquid fuels
UNE-EN 13160-1:2017 Leak detection systems - Part 1: General Principles
UNE-EN 60079-35-1:2012 Explosive atmospheres - Part 35-1: Caplights for use in mines susceptible to firedamp - General requirements - Construction and testing in relation to the risk of explosion
ISO 15970:2008 Natural gas Measurement of properties Volumetric properties: density, pressure, temperature and compression factor
DIN EN 15207:2015-03 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - PLUG/SOCKET CONNECTION AND SUPPLY CHARACTERISTICS FOR SERVICE EQUIPMENT IN HAZARDOUS AREAS WITH 24 V NOMINAL SUPPLY VOLTAGE
DIN EN ISO 80079-36:2016-12 Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements (ISO 80079-36:2016)
EN 50223:2015 Stationary electrostatic application equipment for ignitable flock material - Safety requirements
EI Model code of safe practice Part 15:2015 MODEL CODE OF SAFE PRACTICE - PART 15: AREA CLASSIFICATION FOR INSTALLATIONS HANDLING FLAMMABLE FLUIDS
EN 415-10:2014 Safety of packaging machines - Part 10: General Requirements
EN 1710:2005+A1:2008/AC:2010 EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
EN ISO 15970:2014 Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor (ISO 15970:2008)
UNI EN 13012 : 2012 PETROL FILLING STATIONS - CONSTRUCTION AND PERFORMANCE OF AUTOMATIC NOZZLES FOR USE ON FUEL DISPENSERS
EN 1755:2015 Industrial Trucks - Safety requirements and verification - Supplementary requirements for operation in potentially explosive atmospheres
EN ISO 16923:2018 Natural gas fuelling stations - CNG stations for fuelling vehicles (ISO 16923:2016)
EN 14797:2006 Explosion venting devices
EN 16009:2011 Flameless explosion venting devices
EN 15268:2008 Petrol filling stations - Safety requirements for the construction of submersible pump assemblies
EN ISO 16904:2016 Petroleum and natural gas industries - Design and testing of LNG marine transfer arms for conventional onshore terminals (ISO 16904:2016)
EN ISO 13691:2002 Petroleum and natural gas industries - High-speed special-purpose gear units (ISO 13691:2001)
EN 1539:2015 Dryers and ovens, in which flammable substances are released - Safety requirements
EN 12581:2005+A1:2010 Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements
EN 1953:2013 Atomising and spraying equipment for coating materials - Safety requirements
EN 13616-1:2016 Overfill prevention devices for static tanks for liquid fuels - Part 1: Overfill prevention devices with closure device
EN 14492-1:2006+A1:2009/AC:2010 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
EN 14681:2006+A1:2010 Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces
EN 45510-2-5:2002 Guide for procurement of power station equipment - Part 2-5: Electrical equipment - Motors
OVE/ONORM EN 60079-10-1 : 2009 EXPLOSIVE ATMOSPHERES - PART 10-1: CLASSIFICATION OF AREAS - EXPLOSIVE GAS ATMOSPHERES
EN 14492-2:2006+A1:2009/AC:2010 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
EN 14677:2008 Safety of machinery - Secondary steelmaking - Machinery and equipment for treatment of liquid steel
EN 15207:2014 Tanks for the transport of dangerous goods - Plug/socket connection and supply characteristics for service equipment in hazardous areas with 24 V nominal supply voltage
EN 13852-2:2004 Cranes - Offshore cranes - Part 2: Floating cranes
GOST R 52350.27 : 2005 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 27: FIELDBUS INTRINSICALLY SAFE CONCEPT (FISCO) AND FIELDBUS NON-INCENDIVE CONCEPT (FNICO)
BS EN 13616-2:2016 Overfill prevention devices for static tanks for liquid fuels Overfill prevention devices without a closure device
13/30271477 DC : 0 BS EN 61285 ED 3.0 - INDUSTRIAL-PROCESS CONTROL - SAFETY OF ANALYSER HOUSES
UNE-EN 60695-1-10:2017 Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines
CCS GUIDELINE E-20 : DEC 2017 COMPARTMENT FLOODING WATER LEVEL DETECTORS (INCLUDING SENSORS)
PREN 13617-4 : DRAFT 2010 PETROL FILLING STATIONS - PART 4: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SWIVELS FOR USE ON METERING PUMPS AND DISPENSERS
UNE-EN 60079-30-2:2017 Explosive atmospheres - Part 30-2: Electrical resistance trace heating - Application guide for design, installation and maintenance
BS EN 61241-14:2004 Electrical apparatus for use in the presence of combustible dust Selection and installation
UNE-EN 60079-15:2013 Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
UNE-EN 50177:2010 Stationary electrostatic application equipment for ignitable coating powders - Safety requirements
11/30239992 DC : 0 BS EN 14116 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - DIGITAL INTERFACE FOR THE PRODUCT RECOGNITION DEVICE
NF EN 62952-1 : 2017 POWER SOURCES FOR A WIRELESS COMMUNICATION DEVICE - PART 1: GENERAL REQUIREMENTS OF POWER MODULES
BS EN 50104:2010 Electrical apparatus for the detection and measurement of oxygen. Performance requirements and test methods
I.S. EN 60079-25:2010 EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS (IEC 60079-25:2010 (EQV))
PD CEN/TR 15339-3:2014 Thermal spraying. Safety requirements for thermal spraying equipment Torches for thermal spraying and their connection and supply units
PD ISO/TS 18683:2015 Guidelines for systems and installations for supply of LNG as fuel to ships
CEI EN 60034-30-1 : 2015 ROTATING ELECTRICAL MACHINES - PART 30-1: EFFICIENCY CLASSES OF LINE OPERATED AC MOTORS (IE CODE)
UNE-EN 60079-28:2016 Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation
02/205211 DC : DRAFT JULY 2002 IEC 61241-14 ED.1 - ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 14: SELECTION AND INSTALLATION
BS EN 60079-25:2010 Explosive atmospheres Intrinsically safe electrical systems
02/205209 DC : DRAFT JULY 2002 IEC 61241-1 ED.1 - ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 1: PROTECTION BY ENCLOSURES 'TD'
PREN 13160-3 : DRAFT 2014 LEAK DETECTION SYSTEMS - PART 3: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR LIQUID SYSTEMS FOR TANKS
BS EN 14677:2008 Safety of machinery. Secondary steelmaking. Machinery and equipment for treatment of liquid steel
12/30273102 DC : 0 BS EN 60702-2:2002+A1 - MINERAL INSULATED CABLES AND THEIR TERMINATIONS WITH A RATED VOLTAGE NOT EXCEEDING 750 V - PART 2: TERMINATIONS
10/30214970 DC : 0 BS EN 13616 - OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID PETROLEUM FUELS
PD CEN/TR 15339-4:2014 Thermal spraying. Safety requirements for thermal spraying equipment Gas and liquid fuel supply
07/30168628 DC : 0 BS EN 60079-15 - EXPLOSIVE ATMOSPHERES - PART 15: EQUIPMENT PROTECTION BY TYPE OF PROTECTION "N"
BS EN 50050-1:2013 Electrostatic hand-held spraying equipment. Safety requirements Hand-held spraying equipment for ignitable liquid coating materials
I.S. EN 62013-1:2006 CAPLIGHTS FOR USE IN MINES SUSCEPTIBLE TO FIREDAMP - PART 1: GENERAL REQUIREMENTS - CONSTRUCTION AND TESTING IN RELATION TO THE RISK OF EXPLOSION
10/30238615 DC : DRAFT NOV 2010 BS EN 62282-3-100 - FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
CEI EN 50050-3 : 2014 ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 3: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE FLOCK
13/30267536 DC : 0 BS EN 60079-29-1 ED 2.0 - EXPLOSIVE ATMOSPHERES - PART 29-1: GAS DETECTORS - PERFORMANCE REQUIREMENTS OF DETECTORS FOR FLAMMABLE GASES
12/30243459 DC : 0 BS ISO/IEC 80079-37 - EXPLOSIVE ATMOSPHERES - PART 37: NON-ELECTRICAL EQUIPMENT FOR USE IN EXPLOSIVE ATMOSPHERES - NON-ELECTRICAL TYPE OF PROTECTION CONSTRUCTIONAL SAFETY 'CH', CONTROL OF IGNITION SOURCES 'BH', LIQUID IMMERSION 'KH'
12/30261231 DC : 0 BS EN 15207 - TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - PLUG/SOCKET CONNECTION AND SUPPLY CHARACTERISTICS FOR SERVICE EQUIPMENT IN HAZARDOUS AREAS WITH 24 V NOMINAL SUPPLY VOLTAGE
BS IEC 62086-2 : 2001 AMD 16068 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ELECTRICAL RESISTANCE TRACE HEATING - PART 2: APPLICATION GUIDE FOR DESIGN, INSTALLATION AND MAINTENANCE
10/30233953 DC : 0 BS EN 16191 - TUNNELLING MACHINERY - SAFETY REQUIREMENTS
14/30267617 DC : 0 IEC 60079-10-1 ED 2.0 - EXPLOSIVE ATMOSPHERES - PART 10-1: CLASSIFICATION OF AREAS - EXPLOSIVE GAS ATMOSPHERES
09/30208493 DC : 0 BS EN 16009 - FLAMELESS EXPLOSION VENTING DEVICES (TYPE C STANDARD)
14/30300075 DC : 0 BS EN 60034-12 ED 3.0 - ROTATING ELECTRICAL MACHINES - PART 12: STARTING PERFORMANCE OF SINGLE-SPEED THREE-PHASE CAGE INDUCTION MOTORS
PD IEC/TS 60079-39:2015 Explosive atmospheres Intrinsically safe systems with electronically controlled spark duration limitation
NF EN ISO/IEC 80079-34 : 2011 EXPLOSIVE ATMOSPHERES - PART 34: APPLICATION OF QUALITY SYSTEMS FOR EQUIPMENT MANUFACTURE
BS ISO 16923 : 2016 NATURAL GAS FUELLING STATIONS - CNG STATIONS FOR FUELLING VEHICLES
BS EN 61241-0:2006 Electrical apparatus for use in the presence of combustible dust General requirements
CSA E60079.6 : 2002 : R2011 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 6: OIL-IMMERSION "O"
UNE-EN 15207:2015 Tanks for the transport of dangerous goods - Plug/socket connection and supply characteristics for service equipment in hazardous areas with 24 V nominal supply voltage
07/30167448 DC : 0 BS EN 60079-13 - EXPLOSIVE ATMOSPHERES - PART 13: EQUIPMENT PROTECTION BY PRESSURIZED ROOM "P"
17/30356728 DC : 0 BS EN 12261 - GAS METERS - TURBINE GAS METERS
UNE-EN 13616-2:2016 Overfill prevention devices for static tanks for liquid fuels - Part 2: Overfill prevention devices without a closure device
BS EN 16009:2011 Flameless explosion venting devices
IEC 60309-3:1994 Plugs, socket-outlets and couplers for industrial purposes - Part 3: Particular requirements for plugs, socket-outlets, connectors and appliance inlets for use in explosive gas atmospheres
ISO 14839-4:2012 Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings — Part 4: Technical guidelines
08/30186475 DC : 0 BS EN 13617-1 AMD1 - PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
08/30186575 DC : DRAFT JULY 2008 BS EN 60079-15 ED. 4 - EXPLOSIVE ATMOSPHERES - PART 15: EQUIPMENT PROTECTION BY TYPE OF PROTECTION "N"
05/30135286 DC : 0 EN 15268 - PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION AND PERFORMANCE OF SUBMERSIBLE PUMP ASSEMBLIES
14/30297213 DC : 0 BS EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
11/30247086 DC : 0 BS EN 60079-1 ED. 7.0 - EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES "D"
BS ISO 12649:2004 Graphic technology. Safety requirements for binding and finishing systems and equipment
17/30323887 DC : 0 BS EN 62990-131 - WORKPLACE ATMOSPHERES - PART 1: GAS DETECTORS - PERFORMANCE REQUIREMENTS OF DETECTORS FOR TOXIC GASES
CSA E60079.7 : 2003 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 7: INCREASED SAFETY "E"
NF EN 61310-2 : 2008 SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 2: REQUIREMENTS FOR MARKING
PD IEC/TS 60079-43:2017 Explosive atmospheres Equipment in adverse service conditions
BS EN ISO 16923:2018 Natural gas fuelling stations. CNG stations for fuelling vehicles
14/30267605 DC : 0 BS EN 60079-30-2 ED 1.0 - EXPLOSIVE ATMOSPHERES - PART 30-2: ELECTRICAL RESISTANCE TRACE HEATING - APPLICATION GUIDE FOR DESIGN; INSTALLATION AND MAINTENANCE
04/30068313 DC : DRAFT APR 2004 IEC 62086-1 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ELECTRICAL RESISTANCE TRACE HEATING - PART 1: GENERAL AND TESTING REQUIREMENTS
BS EN 60079-28:2015 Explosive atmospheres Protection of equipment and transmission systems using optical radiation
CEI EN 60079-6 : 2016 EXPLOSIVE ATMOSPHERES - PART 6: EQUIPMENT PROTECTION BY LIQUID IMMERSION 'O'
NF EN 60079-30-1 : 2007 EXPLOSIVE ATMOSPHERES - PART 30-1: ELECTRICAL RESISTANCE TRACE HEATING - GENERAL AND TESTING REQUIREMENTS
PREN 12261 : DRAFT 2017 GAS METERS - TURBINE GAS METERS
IEC TS 60079-39:2015 Explosive atmospheres - Part 39: Intrinsically safe systems with electronically controlled spark duration limitation
ISO 13578:2017 Industrial furnaces and associated processing equipment — Safety requirements for machinery and equipment for production of steel by electric arc furnaces
BS EN 14591-4:2007 Explosion prevention and protection in underground mines. Protective systems Automatic extinguishing systems for road headers
01/208953 DC : DRAFT DEC 2001 IEC 61936-3 ED.1 - POWER INSTALLATIONS EXCEEDING 1 KV AC - PART 3: PARTICULAR REQUIREMENTS FOR POWER GENERATION AND INDUSTRIAL INSTALLATIONS
CEI EN 61784-5-3 : 2014 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 5-3: INSTALLATION OF FIELDBUSES - INSTALLATION PROFILES FOR CPF 3
CSA E60079.5 : 2002 : R2011 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - SAND-FILLED APPARATUS
CSA E60079.15 : 2002 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ELECTRICAL APPARATUS WITH TYPE OF PROTECTION "n"
UNE-EN 15714-2:2010 Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements
NF EN 62086-1 : 2006 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ELECTRICAL RESISTANCE TRACE HEATING - PART 1: GENERAL AND TESTING REQUIREMENTS
BS EN 61779-1:2000 Electrical apparatus for the detection and measurement of flammable gases General requirements and test methods
BS EN 60079-6:2007 Explosive atmospheres Equipment protected by oil immersion \'o\'
SAE J 2578 : 2014 RECOMMENDED PRACTICE FOR GENERAL FUEL CELL VEHICLE SAFETY
I.S. EN ISO 16904:2016 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND TESTING OF LNG MARINE TRANSFER ARMS FOR CONVENTIONAL ONSHORE TERMINALS (ISO 16904:2016)
BIS IS/IEC 60079-7 : 2006 EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E'
DIN EN 15714-2:2010-02 Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements
DIN EN 14677 E : 2008 SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL
I.S. EN 61285:2015 INDUSTRIAL-PROCESS CONTROL - SAFETY OF ANALYZER HOUSES
BIS IS/IEC 60079-31 : 2008 EXPLOSIVE ATMOSPHERES - PART 31: EQUIPMENT DUST IGNITION PROTECTION BY ENCLOSURE "T"
UNI EN ISO 15970 : 2014 NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR
ISO 18132-3:2011 Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels — General requirements for automatic tank gauges — Part 3: Automatic tank gauges for liquefied petroleum and chemical gases on board marine carriers and floating storage
NF EN 1012-3 : 2014 COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS
I.S. EN 60079-10-2:2015 EXPLOSIVE ATMOSPHERES - PART 10-2: CLASSIFICATION OF AREAS - EXPLOSIVE DUST ATMOSPHERES
I.S. EN 50050-3:2013 ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 3: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE FLOCK
UNE-EN 60079-29-2:2016 Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen
I.S. EN 60079-26:2015 EXPLOSIVE ATMOSPHERES - PART 26: EQUIPMENT WITH EQUIPMENT PROTECTION LEVEL (EPL) GA
I.S. EN 60079-1:2014 EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D'
BS EN 62657-1:2017 Industrial communication networks. Wireless communication networks Wireless communication requirements and spectrum considerations
I.S. EN 60079-5:2015 EXPLOSIVE ATMOSPHERES - PART 5: EQUIPMENT PROTECTION BY POWDER FILLING 'Q'
I.S. EN 62657-1:2017 INDUSTRIAL COMMUNICATION NETWORKS - WIRELESS COMMUNICATION NETWORKS - PART 1: WIRELESS COMMUNICATION REQUIREMENTS AND SPECTRUM CONSIDERATIONS
I.S. EN ISO 16923:2018 NATURAL GAS FUELLING STATIONS - CNG STATIONS FOR FUELLING VEHICLES (ISO 16923:2016)
I.S. EN 62052-31:2016 ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 31: PRODUCT SAFETY REQUIREMENTS AND TESTS
I.S. EN 50495:2010 SAFETY DEVICES REQUIRED FOR THE SAFE FUNCTIONING OF EQUIPMENT WITH RESPECT TO EXPLOSION RISKS
PREN 1127-2 : DRAFT 2012 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
EN 60079-18:2015/A1:2017 EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M' (IEC 60079-18:2014/A1:2017)
ISO 11223-1:1995 Petroleum and liquid petroleum products Direct static measurements Contents of vertical storage tanks Part 1: Mass measurement by hydrostatic tank gauging
BS EN 50174-3 : 2013 INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS
NF EN 60079-29-4 : 2010 EXPLOSIVE ATMOSPHERES - PART 29-4: GAS DETECTORS - PERFORMANCE REQUIREMENTS OF OPEN PATH DETECTORS FOR FLAMMABLE GASES
UNE-EN 60079-19:2011 Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation
IEC TS 60079-46:2017 Explosive atmospheres - Part 46: Equipment assemblies
NF EN 60079-35-1 : 2011 EXPLOSIVE ATMOSPHERES - PART 35-1: CAPLIGHTS FOR USE IN MINES SUSCEPTIBLE TO FIREDAMP - GENERAL REQUIREMENTS - CONSTRUCTION AND TESTING IN RELATION TO THE RISK OF EXPLOSION
ISO 18132-1:2011 Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels — General requirements for automatic tank gauges — Part 1: Automatic tank gauges for liquefied natural gas on board marine carriers and floating storage
ISO 19891-1:2017 Ships and marine technology — Specifications for gas detectors intended for use on board ships — Part 1: Portable gas detectors for atmosphere testing of enclosed spaces
I.S. EN 60079-18:2015 EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M'
I.S. EN 60079-14:2014 EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION
CSA C22.2 No. 60601.1 : 2014 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
DIN EN 13175:2015-02 LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS
UNI CEI EN ISO/IEC 80079-34 : 2012 EXPLOSIVE ATMOSPHERES - PART 34: APPLICATION OF QUALITY SYSTEMS FOR EQUIPMENT MANUFACTURE
DIN EN 16009:2011-10 Flameless explosion venting devices
BIS IS 2148 : 2004 AMD 2 2008 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - FLAMEPROOF ENCLOSURES "D"
CEI EN 60079-28 : 2016 EXPLOSIVE ATMOSPHERES - PART 28: PROTECTION OF EQUIPMENT AND TRANSMISSION SYSTEMS USING OPTICAL RADIATION
CLC/TR 60079-32-1:2015 Explosive atmospheres - Part 32-1: Electrostatic Hazards - Guidance
I.S. EN 60079-31:2014 EXPLOSIVE ATMOSPHERES - PART 31: EQUIPMENT DUST IGNITION PROTECTION BY ENCLOSURE 'T'
ISO/TS 18683:2015 Guidelines for systems and installations for supply of LNG as fuel to ships
IEC 60079-18 : 2014 REDLINE EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M'
IEC 60079-10-2 REDLINE : 2ED 2015 EXPLOSIVE ATMOSPHERES - PART 10-2: CLASSIFICATION OF AREAS - EXPLOSIVE DUST ATMOSPHERES
IEC 60079-10-1 REDLINE : 2ED 2015 EXPLOSIVE ATMOSPHERES - PART 10-1: CLASSIFICATION OF AREAS - EXPLOSIVE GAS ATMOSPHERES
I.S. EN ISO 6416:2017 HYDROMETRY - MEASUREMENT OF DISCHARGE BY THE ULTRASONIC TRANSIT TIME (TIME OF FLIGHT) METHOD (ISO 6416:2017)
I.S. EN 50223:2015 STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS
I.S. EN 60079-13:2017 EXPLOSIVE ATMOSPHERES - PART 13: EQUIPMENT PROTECTION BY PRESSURIZED ROOM 'P' AND ARTIFICIALLY VENTILATED ROOM 'V'
PD 60079-14:2000 Guide to application of BS EN 60079-14
DIN EN 14678-1:2013-06 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers
DIN EN 12405-1:2011-04 GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
DIN EN 13237:2013-01 POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
DIN EN 14492-2:2016-08 (Draft) CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
DIN EN 12921-3:2010-02 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids (includes Amendment A1:2008)
DIN EN 14681 E : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES
DIN EN 14492-1:2015-05 (Draft) Cranes - Power driven winches & hoists - part 1 power driven winches; German and English version prEN 14492-1:2015
BS ISO 13691 : 2001 AMD 14307 PETROLEUM AND NATURAL GAS INDUSTRIES - HIGH-SPEED SPECIAL-PURPOSE GEAR UNITS
BS EN 13852-2:2004 Cranes. Offshore cranes Floating cranes
UNE-EN 60079-32-2:2016 Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests
BS ISO 22734-1:2008 Hydrogen generators using water electrolysis process Industrial and commercial applications
UNE-EN 12779:2016 Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements
IEC 60079-17:2013 Explosive atmospheres - Part 17: Electrical installations inspection and maintenance
12/30269297 DC : 0 BS EN 60079-14/ED 5 - EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION
BS EN 12581 : 2005 COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
ISO 22734-1:2008 Hydrogen generators using water electrolysis process Part 1: Industrial and commercial applications
BS EN 14583:2004 Workplace atmospheres. Volumetric bioaerosol sampling devices. Requirements and test methods
IEC 60034-30:2008 Rotating electrical machines - Part 30: Efficiency classes of single-speed, three-phase, cage-induction motors (IE-code)
IEC 60721-1:1990+AMD1:1992+AMD2:1995 CSV Classification of environmental conditions - Part 1: Environmental parameters and their severities
13/30286778 DC : 0 BS EN 60079-1 - EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D'
BS EN 61158-2:2014 Industrial communication networks. Fieldbus specifications Physical layer specification and service definition
UNE-EN ISO 80079-36:2017 Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements (ISO 80079-36:2016)
IEC 61987-12:2016 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 12: Lists of properties (LOPs) for flow measuring equipment for electronic data exchange
DD ISO/TS 20100:2008 Gaseous hydrogen. Fuelling stations
BS EN 14678-1:2013 LPG equipment and accessories. Construction and performance of LPG equipment for automotive filling stations Dispensers
16/30354067 DC : 0 BS EN 62282-5-100 - FUEL CELL TECHNOLOGIES - PART 5-100: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY
BS EN 137:2006 Respiratory protective devices. Self-contained open-circuit compressed air breathing apparatus with full face mask. Requirements, testing, marking
BS IEC 61892-7:2014 Mobile and fixed offshore units. Electrical installations Hazardous areas
BS EN 1953:2013 Atomising and spraying equipment for coating materials. Safety requirements
07/30170388 DC : 0 BS EN 60364-5-54 - LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-54: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - EARTHING ARRANGEMENTS, PROTECTIVE CONDUCTORS AND PROTECTIVE BONDING CONDUCTORS
BS EN 12942 : 1999 RESPIRATORY PROTECTIVE DEVICES - POWER ASSISTED FILTERING DEVICES INCORPORATING FULL FACE MASKS, HALF MASKS OR QUARTER MASKS - REQUIREMENTS, TESTING, MARKING
12/30236742 DC : 0 BS ISO/IEC 80079-36 - EXPLOSIVE ATMOSPHERES - PART 36: NON-ELECTRICAL EQUIPMENT FOR USE IN EXPLOSIVE ATMOSPHERES - BASIC METHODS AND REQUIREMENTS
IEC 62952-1:2016 Power sources for a wireless communication device - Part 1: General requirements of power modules
BS EN 14681 : 2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES
BS EN 14492-2 : 2006 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
IEC 62282-3-1:2007 Fuel cell technologies - Part 3-1: Stationary fuel cell power systems - Safety
BS EN 12921-1 : 2005 MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS
IEC 60601-1:2005+AMD1:2012 CSV Medical electrical equipment - Part 1: General requirements for basic safety and essential performance
EN 60079-2:2014/AC:2015 EXPLOSIVE ATMOSPHERES - PART 2: EQUIPMENT PROTECTION BY PRESSURIZED ENCLOSURE 'P' (IEC 60079-2:2014)
EN 1012-3:2013 Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors
EN ISO 13137:2013 Workplace atmospheres - Pumps for personal sampling of chemical and biological agents - Requirements and test methods (ISO 13137:2013)
EN 12921-3:2005+A1:2008 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids
EN 12583:2014 Gas Infrastructure - Compressor stations - Functional requirements
EN 12981:2005+A1:2009 Coating plants - Spray booths for application of organic powder coating material - Safety requirements
EN 12942:1998/A2:2008 RESPIRATORY PROTECTIVE DEVICES - POWER ASSISTED FILTERING DEVICES INCORPORATING FULL FACE MASKS, HALF MASKS OR QUARTER MASKS - REQUIREMENTS, TESTING, MARKING
UNE-ISO 22734-1:2012 Hydrogen generators using water electrolysis process. Part 1: Industrial and commercial applications
EN 62282-5-1:2012 FUEL CELL TECHNOLOGIES - PART 5-1: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-5-1:2012)
EN 60079-17:2014 Explosive atmospheres - Part 17: Electrical installations inspection and maintenance
EN 61241-11:2006 Electrical apparatus for use in the presence of combustible dust - Part 11: Protection by intrinsic safety "iD"
EN 61779-1 : 2000 AMD 11 2004 ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
EN 12405-3 : 2015 GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
EN 1127-1:2011 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
EN 50104:2010 Electrical apparatus for the detection and measurement of oxygen - Performance requirements and test methods
EN ISO 17621:2015 Workplace atmospheres - Short term detector tube measurement systems - Requirements and test methods (ISO 17621:2015)
EN 45544-1:2015 WORKPLACE ATMOSPHERES - ELECTRICAL APPARATUS USED FOR THE DIRECT DETECTION AND DIRECT CONCENTRATION MEASUREMENT OF TOXIC GASES AND VAPOURS - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
EN 60721-1:1995/A2:1995 CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - PART 1: ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES
EN 60079-1:2014 Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
EN 60079-11:2012 Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
I.S. EN 14583:2004 WORKPLACE ATMOSPHERES - VOLUMETRIC BIOAEROSOL SAMPLING DEVICES - REQUIREMENTS AND TEST METHODS
EN 50628:2016 Erection of electrical installations in underground mines
DIN EN 16299:2013-06 CATHODIC PROTECTION OF EXTERNAL SURFACES OF ABOVE GROUND STORAGE TANK BASES IN CONTACT WITH SOIL OR FOUNDATIONS
EN 14591-4:2007/AC:2008 EXPLOSION PREVENTION AND PROTECTION IN UNDERGROUND MINES - PROTECTIVE SYSTEMS - PART 4: AUTOMATIC EXTINGUISHING SYSTEMS FOR ROAD HEADERS
EN 60079-29-2:2015 Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen
EN 60034-30:2009 Rotating electrical machines - Part 30: Efficiency classes of single-speed, three-phase, cage-induction motors (IE-code)
EN 50050-1:2013 Electrostatic hand-held spraying equipment - Safety requirements - Part 1: Hand-held spraying equipment for ignitable liquid coating materials
EN 60079-6:2015 Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o"
EN 62282-4-101:2014 Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks
EN 61987-14:2016 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 14: Lists of properties (LOP) for temperature measuring equipment for electronic data exchange
EN 60079-35-1:2011/AC:2011 EXPLOSIVE ATMOSPHERES - PART 35-1: CAPLIGHTS FOR USE IN MINES SUSCEPTIBLE TO FIREDAMP - GENERAL REQUIREMENTS - CONSTRUCTION AND TESTING IN RELATION TO THE RISK OF EXPLOSION
EN 61285:2015 Industrial-process control - Safety of analyzer houses
EN 50050-2 : 2013 ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER
EN 60079-5:2015 Explosive atmospheres - Part 5: Equipment protection by powder filling "q"
EN 60079-10-2:2015 Explosive atmospheres - Part 10-2: Classification of areas - Explosive dust atmospheres
EN 14583:2004 Workplace atmospheres - Volumetric bioaerosol sampling devices - Requirements and test methods
EN 61241-0:2006 Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements
EN 61310-2:2008 Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking

View more information
£351.80
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.