IEC 60695-2-13:2010+AMD1:2014 CSV
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods- Glow-wire ignition temperature (GWIT) test method for materials
Hardcopy , PDF
English - French
12-02-2014
24-08-2021
IEC 60695-2-13:2010+A1:2014 specifies the details of the glow-wire test to be applied to test specimens of solid electrical insulating materials or other solid materials for ignitability testing to determine the glow-wire ignition temperature (GWIT). The GWIT is the temperature which is 25 K (or 30 K) higher than the maximum test temperature, determined during this standardized procedure, at which the tested material does not ignite, or if sustained and continuous flaming combustion does not occur for a time longer than 5 s for any single flame event and the specimen is not totally consumed. This second edition of IEC 60695-2-13 cancels and replaces the first edition published in 2000. It also constitutes a technical revision. The main changes with respect to the previous edition are:
- modified title;
- addition of an Introduction;
- clarification of Scope;
- expansion of Clause 2: Normative references;
- expansion of Clause 3;
- revision of Clause 4 to alignment with the IEC 60695-11 series to introduce guidance on test programs for material variations;
- clarification of Clause 8: Conditioning (now Clause 7);
- deletion of Clause 9: Initial measurement;
- expansion of Clause 10: Test procedures (now Clause 8);
- expansion of Clause 11: Observation and measurement (now Clause 9);
- clarification of Clause 12: Evaluation of test results (now Clause 10);
- expansion of Clause 13: Test report (now Clause 11).
This publication is to be read in conjunction with IEC 60695-2-10:2000.
This consolidated version consists of the second edition (2010) and its amendment 1 (2014). Therefore, no need to order amendment in addition to this publication.
| Committee |
TC 89
|
| DevelopmentNote |
Supersedes IEC 60695-2-1/3. (05/2001) To be used in conjunction with IEC 60695-2-10. (10/2010) Stability Date: 2020. (02/2014)
|
| DocumentType |
Standard
|
| Pages |
51
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NBR IEC 60695-2-13 : 2013 | Identical |
| NF EN 60695-2-13 : 2011 AMD 1 2014 | Identical |
| GOST IEC 60695-2-13 : 2012 | Identical |
| NBN EN 60695 2-13 : 2011 AMD 1 2014 | Identical |
| NEN EN IEC 60695-2-13 : 2011 AMD 1 2014 | Identical |
| I.S. EN 60695-2-13:2010 | Identical |
| SAC GB/T 5169-13 : 2013 | Identical |
| VDE 0471-2-13 : 2015 | Identical |
| DIN EN 60695-2-13 : 2015 | Identical |
| BS EN 60695-2-13 : 2010 | Identical |
| EN 60695-2-1-3 : 1996 | Identical |
| NEN 10695-2-1-3 : 1996 | Identical |
| UNE-EN 60695-2-13:2011 | Identical |
| PN EN 60695-2-13 : 2011 AMD 1 2014 | Identical |
| DIN EN 60695-2-1-3 : 1997 | Corresponds |
| BS EN 60695-2-1-3 : 1996 | Identical |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.