• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

IEC 60947-3:2008+AMD1:2012+AMD2:2015 CSV

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

28-09-2021

Language(s)

English - French

Published date

27-07-2015

IEC 60947-3:2008+A1:2012+A2:2015 applies to switches, disconnectors, switch-disconnectors and fuse-combination units to be used in distribution circuits and motor circuits of which the rated voltage does not exceed 1 000 V a.c. or 1 500 V d.c. The manufacturer shall specify the type, ratings and characteristics according to the relevant standard of any incorporated fuses. The technical content is therefore identical to the base edition and its amendment and has been prepared for user convenience. A vertical line in the margin shows where the base publication has been modified by amendment 1. Additions and deletions are displayed in red, with deletions being struck through. The contents of the corrigenda of September 2012 and of November 2013 have been included in this copy. This consolidated version consists of the third edition (2008), its amendment 1 (2012) and its amendment 2 (2015). Therefore, no need to order amendments in addition to this publication.

This publication is to be read in conjunction with IEC 60947-1:2011.

Committee
TC 121/SC 121A
DevelopmentNote
To be read in conjunction with IEC 60947-1. (01/2004) Stability date: 2017. (07/2015)
DocumentType
Standard
Pages
284
PublisherName
International Electrotechnical Committee
Status
Superseded
SupersededBy
Supersedes

BS EN 62475:2010 High-current test techniques. Definitions and requirements for test currents and measuring systems
13/30289140 DC : 0 BS EN 60364-9-1 ED 1.0 - LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 9-1: INSTALLATION DESIGN AND,,SAFETY REQUIREMENTS FOR PHOTOVOLTAIC POWER SYSTEMS (PV)
UNE-HD 50573.5.57:2014 Co-ordination of electrical equipment for protection, isolation, switching and control
04/30111859 DC : 0 IEC 62271-1 - HIGH-VOLTAGE SWITCHGEAR AND CONTROL GEAR - PART 1: COMMON SPECIFICATIONS
BS EN 62040-5-3:2017 Uninterruptible power systems (UPS) DC output UPS. Performance and test requirements
14/30278956 DC : 0 BS ISO 17842-2 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 2: OPERATION, MAINTENANCE AND USE
BS EN 61439-2:2011 Low-voltage switchgear and controlgear assemblies Power switchgear and controlgear assemblies
CEI EN 62475 : 2011 HIGH-CURRENT TEST TECHNIQUES - DEFINITIONS AND REQUIREMENTS FOR TEST CURRENTS AND MEASURING SYSTEMS
S.R. HD 60364-5-537:2016 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-53: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - DEVICES FOR PROTECTION, ISOLATION, SWITCHING, CONTROL AND MONITORING - CLAUSE 537: ISOLATION AND SWITCHING
10/30227671 DC : 0 BS EN 14678-1 - LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
I.S. EN 61439-2:2011 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 2: POWER SWITCHGEAR AND CONTROLGEAR ASSEMBLIES (IEC 61439-2:2011)
CSA C22.2 No. 61010.1 : 2012 : FR SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
IEC 61892-3:2012 Mobile and fixed offshore units - Electrical installations - Part 3: Equipment
IEC 62683-1:2017 Low-voltage switchgear and controlgear - Product data and properties for information exchange - Part 1: Catalogue data
I.S. EN 60694:1999 COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS
I.S. EN 62683-1:2017 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PRODUCT DATA AND PROPERTIES FOR INFORMATION EXCHANGE - PART 1: CATALOGUE DATA
I.S. EN 60309-1:1999 PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 1: GENERAL REQUIREMENTS (IEC 60309-1:1999 (EQV))
CEI EN 60601-2-22 : 2014 MEDICAL ELECTRICAL EQUIPMENT - PART 2-22: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF SURGICAL, COSMETIC, THERAPEUTIC AND DIAGNOSTIC LASER EQUIPMENT
I.S. EN 60269-1:2007 LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS
EN 60204-1 : 2006 COR 2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
EN 62683-1:2017 Low-voltage switchgear and controlgear - Product data and properties for information exchange - Part 1: Catalogue data
EN 62271-1:2017 High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear
I.S. EN 61241-1:2004 ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 1: PROTECTION BY ENCLOSURES "TD"
BS EN 60947-2:2017 Low-voltage switchgear and controlgear Circuit-breakers
CSA C22.2 No. 61980-1 : 2016 ELECTRIC VEHICLE WIRELESS POWER TRANSFER (WPT) SYSTEMS - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 61010.1 : 2012 : INC : UPD 1 :2015 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
EN 13617-1:2012 Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
IEC 61851-1:2017 Electric vehicle conductive charging system - Part 1: General requirements
ISO 20898:2008 Industrial trucks — Electrical requirements
17/30338554 DC : 0 BS EN 1175 - SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL/ELECTRONIC REQUIREMENTS
BS EN IEC 61204-7:2018 Low-voltage switch mode power supplies Safety requirements
IEC 60439-1:1999+AMD1:2004 CSV Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies
15/30286010 DC : 0 BS ISO 14990-1 - EARTH-MOVING MACHINERY - ELECTRICAL SAFETY OF MACHINES UTILISING ELECTRIC DRIVES AND RELATED COMPONENTS AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
BS EN 12622 : 2009 SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES
IEC 60694:1996+AMD1:2000+AMD2:2001 CSV Common specifications for high-voltage switchgear and controlgear standards
CLC/TR 60269-5:2011 Low-voltage fuses - Part 5: Guidance for the application of low-voltage fuses
EN 60269-1:2007/A2:2014 LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS (IEC 60269-1:2006/A2:2014)
EN 60947-6-1:2005/A1:2014 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 6-1: MULTIPLE FUNCTION EQUIPMENT - TRANSFER SWITCHING EQUIPMENT (IEC 60947-6-1:2005/A1:2013)
EN 60694:1996/A2:2001 COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS
EN 62626-1:2014 Low-voltage switchgear and controlgear enclosed equipment - Part 1: Enclosed switch-disconnectors outside the scope of IEC 60947-3 to provide isolation during repair and maintenance work
EN 61241-1:2004/corrigendum Dec. 2006 ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 1: PROTECTION BY ENCLOSURES "TD"
EN 62040-5-3:2017 Uninterruptible power systems (UPS) - Part 5-3: DC output UPS - Performance and test requirements
EN 1175-1:1998+A1:2010 Safety of industrial trucks - Electrical requirements - Part 1: General requirements for battery powered trucks
EN 60947-4-1 : 2010 AMD 1 2012 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS (IEC 60947-4-1:2009/A1:2012)
EN 61851-1:2011 Electric vehicle conductive charging system - Part 1: General requirements
EN 62683:2015 Low-voltage switchgear and controlgear - Product data and properties for information exchange
HD 60364-4-43:2010 Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent
EN 12622:2009+A1:2013 Safety of machine tools - Hydraulic press brakes
EN 62475 : 2010 HIGH-CURRENT TEST TECHNIQUES - DEFINITIONS AND REQUIREMENTS FOR TEST CURRENTS AND MEASURING SYSTEMS
DIN EN 14678-3:2013-03 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 3: REFUELLING INSTALLATIONS AT COMMERCIAL AND INDUSTRIAL PREMISES
BS EN 61241-1:2004 Electrical apparatus for use in the presence of combustible dust Protection by enclosures \'tD\'
BS EN 45510-2-7:2002 Guide for the procurement of power station equipment. Electrical equipment Switchgear and controlgear
I.S. EN 62626-1:2014 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ENCLOSED EQUIPMENT - PART 1: ENCLOSED SWITCH-DISCONNECTORS OUTSIDE THE SCOPE OF IEC 60947-3 TO PROVIDE ISOLATION DURING REPAIR AND MAINTENANCE WORK
10/30233953 DC : 0 BS EN 16191 - TUNNELLING MACHINERY - SAFETY REQUIREMENTS
BS EN 61241-0:2006 Electrical apparatus for use in the presence of combustible dust General requirements
02/204778 DC : DRAFT JULY 2002 IEC 61241-0 ED.1 - ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 0: GENERAL REQUIREMENTS
10/30202620 DC : 0 BS EN 62626-1 - LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR - ENCLOSED SWITCH FOR VARIOUS APPLICATIONS TO PROVIDE ISOLATION OF ELECTRICAL EQUIPMENT DURING REPAIR AND MAINTENANCE WORK
BS EN 14678-3:2013 LPG equipment and accessories. Construction and performance of LPG equipment for automotive filling stations Refuelling installations at commercial and industrial premises
NF EN 60309-1 : 1999 AMD 2 2013 PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 1: GENERAL REQUIREMENTS
03/118895 DC : 0 EN 12622 - SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES
CEI UNI EN 45510-2-7 : 2006 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
EN IEC 61204-7:2018 Low-voltage switch mode power supplies - Part 7: Safety requirements
BS EN 60269-1 : 2007 LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS
CEI UNI EN 45510-2-4 : 2000 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-4: ELECTRICAL EQUIPMENT - HIGH POWER STATIC CONVERTORS
EN 60947-2:2017 Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
I.S. EN 60601-2-57:2011 MEDICAL ELECTRICAL EQUIPMENT - PART 2-57: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF NON-LASER LIGHT SOURCE EQUIPMENT INTENDED FOR THERAPEUTIC, DIAGNOSTIC, MONITORING AND COSMETIC/AESTHETIC USE
I.S. EN 50156-1:2015 ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 1: REQUIREMENTS FOR APPLICATION DESIGN AND INSTALLATION
I.S. EN 62040-5-3:2017 UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 5-3: DC OUTPUT UPS - PERFORMANCE AND TEST REQUIREMENTS
I.S. EN 62683:2015 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PRODUCT DATA AND PROPERTIES FOR INFORMATION EXCHANGE
S.R. HD 60364-7-712:2016 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-712: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - PHOTOVOLTAIC (PV) SYSTEMS
NF EN 61010-1 : 2011 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
UNE-EN 62626-1:2014 Low-voltage switchgear and controlgear enclosed equipment - Part 1: Enclosed switch-disconnectors outside the scope of IEC 60947-3 to provide isolation during repair and maintenance work
IEC 61241-0:2004 Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements
IEC TR 61912-1:2007 Low-voltage switchgear and controlgear - Overcurrent protective devices - Part 1: Application of short-circuit ratings
I.S. EN 60204-32:2008 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES
IEC 62271-1:2017 High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear
IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
ISO/TR 18569:2004 Safety of machinery Guidelines for the understanding and use of safety of machinery standards
IEC 60364-4-43:2008 Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent
I.S. EN 62040-3:2011 UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 3: METHOD OF SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS
EN 61010-1:2010 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
IEC 60947-2:2016 Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
IEC 60204-33:2009 Safety of machinery - Electrical equipment of machines - Part 33: Requirements for semiconductor fabrication equipment
IEC 60364-7-712:2017 Low voltage electrical installations - Part 7-712: Requirements for special installations or locations - Solar photovoltaic (PV) power supply systems
DIN EN 13617-1:2012-08 Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
BS EN 1175-1 : 1998 SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 1: GENERAL REQUIREMENTS FOR BATTERY POWERED TRUCKS
17/30354643 DC : 0 BS EN 62933-2-1 - ELECTRIC ENERGY STORAGE (ESS) SYSTEMS - PART 2-1: UNIT PARAMETERS AND TESTING METHODS - GENERAL SPECIFICATION
UNE-EN 61851-1:2012 Electric vehicle conductive charging system - Part 1: General requirements
06/30154990 DC : 0 BS EN 60204-32 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES
I.S. EN 14678-1:2013 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
I.S. EN ISO 14224:2016 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT (ISO 14224:2016)
I.S. EN 12622:2009 SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES
IEC 60947-2:2016 RLV Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
EN 60947-1:2007/A2:2014 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES (IEC 60947-1:2007/A2:2014)
I.S. EN 13617-1:2012 PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
I.S. EN 1175-1:1998 SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 1: GENERAL REQUIREMENTS FOR BATTERY POWERED TRUCKS
ISA 61241-0 : 2006 ELECTRICAL APPARATUS FOR USE IN ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS - GENERAL REQUIREMENTS
02/211967 DC : DRAFT DEC 2002 IEC 61204-7 ED.1 - LOW VOLTAGE POWER SUPPLIES, D.C. OUTPUT - PART 7: SAFETY REQUIREMENTS
BS EN 60601-2-57:2011 Medical electrical equipment Particular requirements for the basic safety and essential performance of non-laser light source equipment intended for therapeutic, diagnostic, monitoring and cosmetic/aesthetic use
PREN 13617-1 : DRAFT 2010 PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
BS EN 62626-1:2014 Low-voltage switchgear and controlgear enclosed equipment Enclosed switch-disconnectors outside the scope of IEC 60947-3 to provide isolation during repair and maintenance work
BS ISO 20898:2008 Industrial trucks. Electrical requirements
10/30219405 DC : 0 BS EN 13617-1 - PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
14/30297921 DC : 0 BS EN 62040-5-3 - UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 5-3: METHOD OF SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS FOR D.C. UPS
I.S. HD 50573-5-57:2014 CO-ORDINATION OF ELECTRICAL EQUIPMENT FOR PROTECTION, ISOLATION, SWITCHING AND CONTROL
CEI EN 61439-2 : 2012 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 2: POWER SWITCHGEAR AND CONTROLGEAR ASSEMBLIES
07/30165742 DC : 0 BS EN 60947-4-1 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS
BS EN 60601-2-22:2013 Medical electrical equipment Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment
IEC TR 63054:2017 Low-voltage switchgear and controlgear - Fire risk analysis and risk reduction measures
18/30371712 DC BS EN 60947-6-1. Low-voltage switchgear and controlgear Part 6-1. Multiple function equipment. Transfer switching equipment
16/30301665 DC : 0 BS EN 61439-2 ED3.0 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 2: POWER SWITCHGEAR AND CONTROLGEAR ASSEMBLIES
10/30232643 DC : 0 BS EN 62613-1 - HIGH-VOLTAGE PLUGS, SOCKET-OUTLETS AND SHIP COUPLERS FOR HIGH-VOLTAGE SHORE CONNECTION SYSTEMS (HVSC-SYSTEMS) - PART 1: GENERAL REQUIREMENTS
ISA S82.01 : 1994 ELECTRICAL AND ELECTRONIC TEST, MEASURING, CONTROLLING AND RELATED EQUIPMENT - GENERAL REQUIREMENTS
DD IEC/TS 62091:2003 Low-voltage switchgear and controlgear. Controllers for drivers of stationary fire pumps
PREN 16191 : DRAFT 2010 TUNNELLING MACHINERY - SAFETY REQUIREMENTS
EN 62040-3:2011 Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements
IEC TR 60269-5:2014 Low-voltage fuses - Part 5: Guidance for the application of low-voltage fuses
EN IEC 62933-2-1:2018 Electrical energy storage (EES) systems - Part 2-1: Unit parameters and testing methods - General specification
BS EN 62040-3:2011 Uninterruptible power systems (UPS) Method of specifying the performance and test requirements
BS EN 62271-1:2017 High-voltage switchgear and controlgear Common specifications for alternating current switchgear and controlgear
I.S. EN IEC 62933-2-1:2018 ELECTRICAL ENERGY STORAGE (EES) SYSTEMS - PART 2-1: UNIT PARAMETERS AND TESTING METHODS - GENERAL SPECIFICATION
I.S. EN 60947-2:2017 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 2: CIRCUIT-BREAKERS
I.S. EN IEC 61204-7:2018 LOW-VOLTAGE SWITCH MODE POWER SUPPLIES - PART 7: SAFETY REQUIREMENTS
BIS IS/IEC 62271-1 : 2007 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS
CSA C22.2 No. 60601-2-57:2011 MEDICAL ELECTRICAL EQUIPMENT - PART 2-57: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF NON-LASER LIGHT SOURCE EQUIPMENT INTENDED FOR THERAPEUTIC, DIAGNOSTIC, MONITORING AND COSMETIC/AESTHETIC USE
UNI EN 14678-3 : 2013 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 3: REFUELLING INSTALLATIONS AT COMMERCIAL AND INDUSTRIAL PREMISES
CAN/CSA-C22.2 NO. 61010-1-12 (R2017) Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements (Tri-national standard, with UL 61010-1 and ANSI/ISA-61010-1 (82.02.01)
ISO 17842-2:2015 Safety of amusement rides and amusement devices Part 2: Operation and use
I.S. EN 61851-1:2011 ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 1: GENERAL REQUIREMENTS
ISO 12643-1:2009 Graphic technology — Safety requirements for graphic technology equipment and systems — Part 1: General requirements
I.S. EN 61010-1:2010/A1:2019 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
IEC 60947-4-1:2009+AMD1:2012 CSV Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
IEC 61204-7:2016 EXV LOW-VOLTAGE SWITCH MODE POWER SUPPLIES - PART 7: SAFETY REQUIREMENTS
IEC 61241-1-1:1999 Electrical apparatus for use in the presence of combustible dust - Part 1-1: Electrical apparatus protected by enclosures and surface temperature limitation - Specification for apparatus
I.S. EN 60204-1:2006 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
IEC 62933-2-1:2017 Electrical energy storage (EES) systems - Part 2-1: Unit parameters and testing methods - General specification
NF EN 61851-1 : 2012 ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 1: GENERAL REQUIREMENTS
DIN EN 12622:2014-02 Safety of machine tools - Hydraulic press brakes (includes Amendment A1:2013)
UNE-HD 60364-7-712:2017 Low-voltage electrical installations - Part 7-712: Requirements for special installations or locations - Photovoltaic (PV) systems
UNE-EN 60947-4-1:2011 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
18/30375223 DC BS EN 60947-4-3. Low-voltage switchgear and controlgear Part 4-3. Contactors and motor-starters. Semiconductor controllers and semiconductor contactors for non-motor loads
UNE-EN 14678-1:2013 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers
ISO 14224:2016 Petroleum, petrochemical and natural gas industries Collection and exchange of reliability and maintenance data for equipment
UNE-EN 61010-1:2011 Safety requirements for electrical equipment for measurement, control and laboratory use -- Part 1: General requirements
EN 60601-2-22:2013 Medical electrical equipment - Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment
UNE-HD 60364-5-53:2016 Low-voltage electrical installations - Part 5-53: Selection and erection of electrical equipment - Switchgear and controlgear
ISA 61010-1 : 2008 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
UNE-EN 60204-1:2007 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
UNI EN 13617-1 : 2012 PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
EN 14678-1:2013 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers
UNI EN 1175-1 : 2010 SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 1: GENERAL REQUIREMENTS FOR BATTERY POWERED TRUCKS
UNI EN 14678-1 : 2013 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
UNI EN 12622 : 2014 SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES
NF EN 62626-1 : 2014 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ENCLOSED EQUIPMENT - PART 1: ENCLOSED SWITCH-DISCONNECTORS OUTSIDE THE SCOPE OF IEC 60947-3 TO PROVIDE ISOLATION DURING REPAIR AND MAINTENANCE WORK
NF EN 61439-2 : 2012 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 2: POWER SWITCHGEAR AND CONTROLGEAR ASSEMBLIES
PREN 14678-1 : DRAFT 2010 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
PREN 1175 : DRAFT 2017 SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL/ELECTRONIC REQUIREMENTS
S.R. CLC/TR 60269-5:2011 LOW-VOLTAGE FUSES - PART 5: GUIDANCE FOR THE APPLICATION OF LOW-VOLTAGE FUSES
08/30190505 DC : 0 BS ISO 12643-1 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
BS ISO 12643-1:2009 Graphic technology. Safety requirements for graphic technology equipment and systems General requirements
04/30121678 DC : DRAFT AUG 2004
IEC TS 62091:2003 Low-voltage switchgear and controlgear - Controllers for drivers of stationary fire pumps
PD IEC/TR 61912:2006 Application of the short-circuit ratings of low-voltage switchgear and controlgear
09/30204033 DC : 0 BS EN 61439-2 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 2: POWER SWITCHGEAR AND CONTROLGEAR ASSEMBLIES
07/30168572 DC : 0 BS IEC 61010-1 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
UNE-EN 61439-2:2012 Low-voltage switchgear and controlgear assemblies - Part 2: Power switchgear and controlgear assemblies
09/30165797 DC : 0 BS EN 60601-2-57 ED.1 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-57: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF NON-LASER LIGHT SOURCE EQUIPMENT INTENDED FOR THERAPEUTIC, DIAGNOSTIC, MONITORING AND COSMETIC/AESTHETIC USE
DIN VDE 0660-102 : 1992 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS
CSA C22.2 No. 60601.2.22 : 2008 : R2014 MEDICAL ELECTRICAL EQUIPMENT - PART 2-22: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF SURGICAL, COSMETIC, THERAPEUTIC AND DIAGNOSTIC LASER EQUIPMENT
BS EN 60947-1 : 2007 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
CSA C22.2 NO. 60947-4-1:14 (R2019) Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters ( Bi-national standard, with UL 60947-4-1)
UNI CEI EN 45510-2-7 : 2011 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
IEC TR 61818:2003 Application guide for low-voltage fuses
S.R. HD 60364-5-53:2015 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-53: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
I.S. EN 60947-6-1:2005 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 6-1: MULTIPLE FUNCTION EQUIPMENT - TRANSFER SWITCHING EQUIPMENT
I.S. EN 60601-2-22:2013 MEDICAL ELECTRICAL EQUIPMENT - PART 2-22: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF SURGICAL, COSMETIC, THERAPEUTIC AND DIAGNOSTIC LASER EQUIPMENT (IEC 60601-2-22:2007 (EQV) + A1:2012 (EQV))
ISA 61241-1 : 2006 ELECTRICAL APPARATUS FOR USE IN ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS - PROTECTION BY ENCLOSURES "TD"
ISO 14990-1:2016 Earth-moving machinery — Electrical safety of machines utilizing electric drives and related components and systems — Part 1: General requirements
I.S. EN 60947-7-2:2009 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 7-2: ANCILLARY EQUIPMENT - PROTECTIVE CONDUCTOR TERMINAL BLOCKS FOR COPPER CONDUCTORS
BS EN 62683:2015 Low-voltage switchgear and controlgear. Product data and properties for information exchange
CEI 13-26 : 1999 WATT-HOUR METERS AND POWER LIMITERS FOR LOW-VOLTAGE NETWORKS (INTEGRATED UNITS) PERMITTED OR NOT FOR PROCESSING AND REMOTE MANAGEMENT OF DATA
CSA C22.2 No. 60601.2.22 : 2008 MEDICAL ELECTRICAL EQUIPMENT - PART 2-22: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF SURGICAL, COSMETIC, THERAPEUTIC AND DIAGNOSTIC LASER EQUIPMENT
CEI UNI EN 45510-2-3 : 2000 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-3: ELECTRICAL EQUIPMENT - STATIONARY BATTERIES AND CHARGERS
I.S. EN 61010-1:2010 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
IEC 62040-1:2017 EXV UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1: SAFETY REQUIREMENTS
IEC PAS 63108:2017 Electrical installation in ships - Primary DC distribution - System design architecture
I.S. EN 61241-0:2006 ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 0: GENERAL REQUIREMENTS
I.S. HD 60364-4-43:2010 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-43: PROTECTION FOR SAFETY - PROTECTION AGAINST OVERCURRENT
I.S. EN 60439-1:2000 LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1 - TYPE TESTED AND PARTIALLY TYPE TESTED ASSEMBLIES
IEC 61439-2:2011 Low-voltage switchgear and controlgear assemblies - Part 2: Power switchgear and controlgear assemblies
IEC 60309-1:1999+AMD1:2005+AMD2:2012 CSV Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements
BS PD88-5(2010) : 2010 LOW-VOLTAGE FUSES - PART 5: GUIDANCE FOR THE APPLICATION OF LOW-VOLTAGE FUSES
PD IEC/TS 62548:2013 Photovoltaic (PV) arrays. Design requirements
07/30169755 DC : 0 BS EN 60364-5-53 - LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-53: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - PROTECTION, ISOLATION, SWITCHING, CONTROL AND MONITORING
IEC 61241-1:2004 Electrical apparatus for use in the presence of combustible dust - Part 1: Protection by enclosures "tD"
BS EN 60947-2:2017+A1:2020 Low-voltage switchgear and controlgear Circuit-breakers
IEC TS 62850:2013 Safety requirements for electrical equipment for measurement, control, and laboratory use - General requirements for equipment intended to be used in educational establishments by children
15/30297990 DC : 0 BS EN 62840-2 ED 1.0 - ELECTRIC VEHICLE BATTERY SWAP SYSTEM - PART 2: SAFETY REQUIREMENTS
BS EN 61851-1:2011 Electric vehicle conductive charging system General requirements
14/30238347 DC : 0 BS EN 60204-1 ED 6.0 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
08/30195018 DC : DRAFT DEC 2008 BS EN 60204-33 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 33: REQUIREMENTS FOR SEMICONDUCTOR FABRICATION EQUIPMENT
BS EN 62282-4-101:2014 Fuel cell technologies Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Safety of electrically powered industrial trucks
BS EN 13617-1:2012 Petrol filling stations Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
08/30185258 DC : DRAFT JULY 2008 BS EN 60269-5 - LOW-VOLTAGE FUSES - PART 5: GUIDANCE FOR THE APPLICATION OF LOW-VOLTAGE FUSES
UNE-EN 1175-1:1998 SAFETY OF INDUSTRIAL TRUCKS. ELECTRICAL REQUIREMENTS. PART 1: GENERAL REQUIREMENTS FOR BATTERY POWERED TRUCKS.
IEC 60269-1:2006+AMD1:2009+AMD2:2014 CSV Low-voltage fuses - Part 1: General requirements
13/30292412 DC : 0 BS EN 62683 - PRODUCT DATA AND PROPERTIES FOR INFORMATION EXCHANGE
IEC 62040-5-3:2016 Uninterruptible power systems (UPS) - Part 5-3: DC output UPS - Performance and test requirements
IEC 60309-2:1999+AMD1:2005+AMD2:2012 CSV Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories
IEC 62282-4-101:2014 Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks
UNE-EN 12622:2011 Safety of machine tools - Hydraulic press brakes
IEC 60601-2-22:2007+AMD1:2012 CSV Medical electrical equipment - Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment
UNE-EN 60601-2-57:2012 Medical electrical equipment - Part 2-57: Particular requirements for the basic safety and essential performance of non-laser light source equipment intended for therapeutic, diagnostic, monitoring and cosmetic/aesthetic use
UNE-EN 13617-1:2012 Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
ISO 22734-2:2011 Hydrogen generators using water electrolysis process Part 2: Residential applications
IEC 62475:2010 High-current test techniques - Definitions and requirements for test currents and measuring systems
IEC 62040-3:2011 Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements
IEC 60601-2-57:2011 Medical electrical equipment - Part 2-57: Particular requirements for the basic safety and essential performance of non-laser light source equipment intended for therapeutic, diagnostic, monitoring and cosmetic/aesthetic use
IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV Low-voltage switchgear and controlgear - Part 1: General rules
IEC 60947-6-1:2005+AMD1:2013 CSV Low-voltage switchgear and controlgear - Part 6-1: Multiple functionequipment - Transfer switching equipment
BS ISO 14990-1:2016 Earth-moving machinery. Electrical safety of machines utilizing electric drives and related components and systems General requirements
BS EN 60439-1:1999 Low-voltage switchgear and controlgear assemblies Type-tested and partially type-tested assemblies
BS EN 50156-1:2015 Electrical equipment for furnaces and ancillary equipment Requirements for application design and installation
BS EN 60204-33:2011 Safety of machinery. Electrical equipment of machines Requirements for semiconductor fabrication equipment
15/30269927 DC : 0 BS EN 61851-1 ED 3.0 - ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM PART 1: GENERAL REQUIREMENTS
10/30230568 DC : 0 BS EN 61892-3 - MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 3: EQUIPMENT
BS IEC 62548:2016 Photovoltaic (PV) arrays. Design requirements
UNE-HD 60364-4-43:2013 Low-voltage electrical installations -- Part 4-43: Protection for safety - Protection against overcurrent
12/30260546 DC : 0 BS EN 50156-1 - ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 1: REQUIREMENTS FOR APPLICATION DESIGN AND INSTALLATION
BS ISO 22734-2:2011 Hydrogen generators using water electrolysis process Residential applications
07/30153021 DC : 0 BS IEC 60204-33 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 33: REQUIREMENTS FOR SEMICONDUCTOR FABRICATION EQUIPMENT
EN 45510-2-7:2002 Guide for procurement of power station equipment - Part 2-7: Electrical equipment - Switchgear and controlgear
EN 14678-3:2013 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 3: Refuelling installations at commercial and industrial premises
HD 60364-5-537:2016/A11:2017 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-53: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - DEVICES FOR PROTECTION, ISOLATION, SWITCHING, CONTROL AND MONITORING - CLAUSE 537: ISOLATION AND SWITCHING
BS EN 60947-4-1 : 2010 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS
PD IEC/TR 63054:2017 Low-voltage switchgear and controlgear. Fire risk analysis and risk reduction measures
06/30151625 DC : DRAFT JUN 2006 BS IEC TR 61912-1 - APPLICATION OF THE SHORT-CIRCUIT RATINGS OF LOW-VOLTAGE SWITCHGEAR AND CONTROL GEAR
BS EN 62683-1:2017 Low-voltage switchgear and controlgear. Product data and properties for information exchange Catalogue data
16/30328756 DC : 0 BS EN 13814-2 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 2: OPERATION, MAINTENANCE AND USE
02/205209 DC : DRAFT JULY 2002 IEC 61241-1 ED.1 - ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 1: PROTECTION BY ENCLOSURES 'TD'
15/30314469 DC : 0 BS EN 62548 ED.1 - PHOTOVOLTAIC (PV) ARRAYS - DESIGN REQUIREMENTS
15/30265353 DC : 0 BS EN 62271-1 ED 2 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS FOR ALTERNATING CURRENT SWITCHGEAR AND CONTROLGEAR
BS EN 60694:1997 Common specifications for high-voltage switchgear and controlgear standards
CSA C22.2 No. 60601-2-57 : 2011 : R2016 MEDICAL ELECTRICAL EQUIPMENT - PART 2-57: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF NON-LASER LIGHT SOURCE EQUIPMENT INTENDED FOR THERAPEUTIC, DIAGNOSTIC, MONITORING AND COSMETIC/AESTHETIC USE
05/30135633 DC : DRAFT JUN 2005 IEC 60269-1 ED 4 - LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS
EN 61439-2 : 2011 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 2: POWER SWITCHGEAR AND CONTROLGEAR ASSEMBLIES (IEC 61439-2:2011)
BS ISO 17842-2:2015 Safety of amusement rides and amusement devices Operation and use
BIS IS/ISO 12643-1 : 2009 GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
15/30329828 DC : 0 BS EN 60601-2-22 ED 4.0 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-22: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF SURGICAL; COSMETIC; THERAPEUTIC AND DIAGNOSTIC LASER EQUIPMENT
PD IEC/TR 61912-1:2007 Low-voltage switchgear and controlgear. Overcurrent protective devices Application of short-circuit ratings
07/30169774 DC : 0 BS EN 60364-5-53 - LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-53: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - PROTECTION, ISOLATION, SWITCHING, CONTROL AND MONITORING
BS IEC 61892-3:2012 Mobile and fixed offshore units. Electrical installations Equipment
CSA C22.2 No. 60601.2.22 : 2008 : INC : AMD 1 : 2014 : R201400 MEDICAL ELECTRICAL EQUIPMENT - PART 2-22: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF SURGICAL, COSMETIC, THERAPEUTIC AND DIAGNOSTIC LASER EQUIPMENT
UNE-EN 62683:2016 Low-voltage switchgear and controlgear - Product data and properties for information exchange
CSA C22.2 No. 61010.1 :2012 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
03/311404 DC : 0 IEC 61010-1 ED.3 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
UNE-EN 62475:2012 High-current test techniques - Definitions and requirements for test currents and measuring systems
UNE-EN 60947-6-1:2006 Low-voltage switchgear and controlgear -- Part 6-1: Multiple function equipment - Transfer switching equipment (IEC 60947-6-1:2005)
CSA C22.2 No. 61010.1 : 2012 : INC : UPD 1 : 2015 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
I.S. EN 62475:2010 HIGH-CURRENT TEST TECHNIQUES - DEFINITIONS AND REQUIREMENTS FOR TEST CURRENTS AND MEASURING SYSTEMS
I.S. EN 14678-3:2013 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 3: REFUELLING INSTALLATIONS AT COMMERCIAL AND INDUSTRIAL PREMISES
UNI ISO 20898 : 2009 INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS
I.S. EN 60947-1:2007 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
CSA C22.2 No. 61010.1 : 2012 : INC : UPD 2 :2016 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
CEI UNI EN 45510-2-2 : 1999 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-2: ELECTRICAL EQUIPMENT - UNINTERRUPTIBLE POWER SUPPLIES
BS EN 60309-1 : 1999 PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 1: GENERAL REQUIREMENTS
I.S. EN 60947-4-1:2010 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS (IEC 60947-4-1:2009 (EQV))
BS EN 60947-6-1:2005 Low-voltage switchgear and controlgear Multiple function equipment. Transfer switching equipment
IEC 60947-2 REDLINE : 5ED 2016 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 2: CIRCUIT-BREAKERS
IEC 60364-7-712 REDLINE : 2ED 2017 LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-712: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - SOLAR PHOTOVOLTAIC (PV) POWER SUPPLY SYSTEMS
HD 50573-5-57:2014 Co-ordination of electrical equipment for protection, isolation, switching and control
BIS IS/IEC 60947-4-1 : 2000 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4: CONTACTORS AND MOTOR-STARTERS - SECTION 1: ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS
CSA C22.2 No. 61010.1 : 2012 : INC : UPD 2 : 2016 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
IEC 62091:2007 Low-voltage switchgear and controlgear - Controllers for drivers of stationary fire pumps
IEC 62840-2:2016 Electric vehicle battery swap system - Part 2: Safety requirements
I.S. EN 60204-33:2011 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 33: REQUIREMENTS FOR SEMICONDUCTOR FABRICATION EQUIPMENT
I.S. EN 62271-1:2017 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS FOR ALTERNATING CURRENT SWITCHGEAR AND CONTROLGEAR
DIN EN 14678-1:2013-06 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers
CEI 32-18 : 2005 APPLICATION GUIDE FOR LOW-VOLTAGE FUSES
BS ISO 22734-1:2008 Hydrogen generators using water electrolysis process Industrial and commercial applications
IEC 62626-1:2014 Low-voltage switchgear and controlgear enclosed equipment - Part 1: Enclosed switch-disconnectors outside the scope of IEC 60947-3 to provide isolation during repair and maintenance work
PD IEC/TR 60269-5:2010 Low-voltage fuses Guidance for the application of low-voltage fuses
02/203840 DC : DRAFT MAY 2002 IEC 60204-1/ED.5.0 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
IEC 60204-32:2008 Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
PD ISO/TR 18569:2004 Safety of machinery. Guidelines for the understanding and use of safety of machinery standards.
ISO 22734-1:2008 Hydrogen generators using water electrolysis process Part 1: Industrial and commercial applications
BS EN 45510-2-2:1999 Guide for the procurement of power station equipment. Electrical equipment Uninterruptible power supplies - Uninterruptible power supplies for power plants
BS EN 14678-1:2013 LPG equipment and accessories. Construction and performance of LPG equipment for automotive filling stations Dispensers
PD IEC/TS 62850:2013 Safety requirements for electrical equipment for measurement, control, and laboratory use. General requirements for equipment intended to be used in educational establishments by children
IEC 61010-1:2010+AMD1:2016 CSV Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
BS EN ISO 14224:2016 Petroleum, petrochemical and natural gas industries. Collection and exchange of reliability and maintenance data for equipment
BS EN 60204-1 : 2006 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
BS EN 60204-32:2008 Safety of machinery. Electrical equipment of machines Requirements for hoisting machines
EN 60309-1:1999/A1:2007/AC:2014 PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 1: GENERAL REQUIREMENTS (IEC 60309-1:1999/A2:2012)
HD 60364-5-53:2015/A11:2017 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-53: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
UNE-ISO 22734-1:2012 Hydrogen generators using water electrolysis process. Part 1: Industrial and commercial applications
EN 60947-7-2:2009 Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors
EN 50156-1:2015 Electrical equipment for furnaces and ancillary equipment - Part 1: Requirements for application design and installation
HD 60364-7-712:2016 Low-voltage electrical installations - Part 7-712: Requirements for special installations or locations - Photovoltaic (PV) systems
IEC 60364-7-712:2017 RLV Low voltage electrical installations - Part 7-712: Requirements for special installations or locations - Solar photovoltaic (PV) power supply systems
EN 60439-1:1999/A1:2004 LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1 - TYPE TESTED AND PARTIALLY TYPE TESTED ASSEMBLIES
EN 60204-32:2008 Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
EN 60204-33:2011 Safety of machinery - Electrical equipment of machines - Part 33: Requirements for semiconductor fabrication equipment
EN 62282-4-101:2014 Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks
EN 60601-2-57:2011 Medical electrical equipment - Part 2-57: Particular requirements for the basic safety and essential performance of non-laser light source equipment intended for therapeutic, diagnostic, monitoring and cosmetic/aesthetic use
CEI 18-58 : 2013 MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 3: EQUIPMENT
EN 61241-0:2006 Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements
UNE-HD 60364-5-537:2017 Low-voltage electrical installations - Part 5-53: Selection and erection of electrical equipment - Devices for protection, isolation, switching, control and monitoring - Clause 537: Isolation and switching
BS 88-1(2007) : 2007 LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS

IEC 60364-7-712:2017 Low voltage electrical installations - Part 7-712: Requirements for special installations or locations - Solar photovoltaic (PV) power supply systems
IEC 61000-4-4 : 3.0EN+(REDLINE+VERSION) ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST
IEC 60947-4-1:2009+AMD1:2012 CSV Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
IEC 60050-441:1984 International Electrotechnical Vocabulary (IEV) - Part 441: Switchgear, controlgear and fuses
IEC 60947-5-1 : 4.0 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
IEC 61000-4-4:2012 RLV Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
IEC 61000-4-6 : 4.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS
IEC 61000-4-6:2013 Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
CISPR 22:2008 Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
IEC 60410:1973 Sampling plans and procedures for inspection by attributes
IEC 60447:2004 Basic and safety principles for man-machine interface, marking and identification - Actuating principles
IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV Low-voltage switchgear and controlgear - Part 1: General rules
IEC 61000-4-2:2008 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
CISPR 11:2015 RLV Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
IEC 60947-2:2016 Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
IEC TR 60664-2-1:2011 Insulation coordination for equipment within low-voltage systems - Part 2-1: Application guide - Explanation of the application of the IEC 60664 series, dimensioning examples and dielectric testing
IEC 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests

View more information
£562.88
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.