ISO 11114-2:2013
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 2: Non-metallic materials
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
20-10-2021
English, French
21-03-2013
ISO 11114-2:2013 gives guidance in the selection and evaluation of compatibility between non-metallic materials for gas cylinders and valves and the gas contents. It also covers bundles, tubes and pressure drums.
ISO 11114-2:2013 can be helpful for composite and laminated materials used for gas cylinders.
It does not cover the subject completely and is intended to give guidance only in evaluating the compatibility of gas/material combinations.
Only the influence of the gas in changing the material and mechanical properties is considered (for example chemical reaction or change in physical state). The basic properties of the materials, such as mechanical properties, required for design purposes are normally available from the materials' supplier and are not considered.
The compatibility data given are related to single component gases but can be used to some extent for gas mixtures. Ceramics, glasses, and adhesives are not covered.
Other aspects such as quality of delivered gas are not considered.
ISO 11114-2:2013 is not intended to be used for cryogenic fluids (see ISO 21010).
DevelopmentNote |
Supersedes ISO/DIS 11114-2. (03/2013)
|
DocumentType |
Standard
|
Pages |
14
|
PublisherName |
International Organization for Standardization
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
NF EN ISO 11114-2 : 2013 | Identical |
NBN EN ISO 11114-2 : 2013 | Identical |
NEN EN ISO 11114-2 : 2013 | Identical |
NS EN ISO 11114-2 : 2013 | Identical |
I.S. EN ISO 11114-2:2013 | Identical |
PN EN ISO 11114-2 : 2013 | Identical |
SN EN ISO 11114-2 : 2013 | Identical |
UNI EN ISO 11114-2 : 2013 | Identical |
UNE-EN ISO 11114-2:2013 | Identical |
EN ISO 11114-2:2013 | Identical |
DIN EN ISO 11114-2:2013-07 | Identical |
ONORM EN ISO 11114-2 : 2013 | Identical |
BIS IS/ISO 11114-2 : 2000 | Identical |
BS EN ISO 11114-2:2013 | Identical |
ISO 17879:2017 | Gas cylinders — Self-closing cylinder valves — Specification and type testing |
EN 13175:2014 | LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS |
BS EN ISO 25760:2015 | Gas cylinders. Operational procedures for the safe removal of valves from gas cylinders |
BS ISO 12619-14:2017 | Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components Flexible fuel line |
10/30196141 DC : 0 | BS ISO 11119-3 - GAS CYLINDERS OF COMPOSITE CONSTRUCTION - SPECIFICATION AND TEST METHODS - PART 3: FULLY WRAPPED FIBRE REINFORCED COMPOSITE GAS CYLINDERS AND TUBES WITH NON-METALLIC AND NON-LOAD SHARING METAL LINERS |
I.S. EN ISO 11118:2015&LC:2015-12 | GAS CYLINDERS - NON-REFILLABLE METALLIC GAS CYLINDERS - SPECIFICATION AND TEST METHODS (ISO 11118:2015) |
BS ISO 21013-2 : 2007 | CRYOGENIC VESSELS - PRESSURE-RELIEF ACCESSORIES FOR CRYOGENIC SERVICE - PART 2: NON-RECLOSABLE PRESSURE-RELIEF DEVICES |
11/30196123 DC : DRAFT MAY 2011 | BS ISO 11119-2 - GAS CYLINDERS OF COMPOSITE CONSTRUCTION - SPECIFICATION AND TEST METHODS - PART 2: FULLY WRAPPED FIBRE REINFORCED COMPOSITE GAS CYLINDERS WITH LOAD-SHARING METAL LINERS |
02/705544 DC : DRAFT APR 2002 | BS EN ISO 10297 - TRANSPORTABLE GAS CYLINDERS - CYLINDER VALVES - SPECIFICATION AND TYPE TESTING |
17/30359992 DC : 0 | BS ISO 21266-1 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH[2]) AND HYDROGEN/NATURAL GAS BLENDS FUEL SYSTEMS - PART 1: SAFETY REQUIREMENTS |
BS EN ISO 24431:2016 | Gas cylinders. Seamless, welded and composite cylinders for compressed and liquefied gases (excluding acetylene). Inspection at time of filling |
16/30299123 DC : 0 | BS EN ISO 15996 - GAS CYLINDERS - RESIDUAL PRESSURE VALVES - SPECIFICATION AND TYPE TESTING OF CYLINDER VALVES INCORPORATING RESIDUAL PRESSURE DEVICES |
15/30315882 DC : 0 | BS ISO 12619-3:2014/AMD 1 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH2) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 3: PRESSURE REGULATOR |
DIN EN ISO 11118:2016-03 | GAS CYLINDERS - NON-REFILLABLE METALLIC GAS CYLINDERS - SPECIFICATION AND TEST METHODS |
DIN EN 16509:2014-12 | TRANSPORTABLE GAS CYLINDERS - NON-REFILLABLE, SMALL TRANSPORTABLE, STEEL CYLINDERS OF CAPACITIES UP TO AND INCLUDING 120 ML CONTAINING COMPRESSED OR LIQUEFIED GASES (COMPACT CYLINDERS) - DESIGN, CONSTRUCTION, FILLING AND TESTING |
ISO 21013-1:2008 | Cryogenic vessels Pressure-relief accessories for cryogenic service Part 1: Reclosable pressure-relief valves |
NF EN ISO 15995 : 2011 | GAS CYLINDERS - SPECIFICATIONS AND TESTING OF LPG CYLINDER VALVES - MANUALLY OPERATED |
DIN EN ISO 15995:2010-11 | GAS CYLINDERS - SPECIFICATIONS AND TESTING OF LPG CYLINDER VALVES - MANUALLY OPERATED |
12/30197523 DC : 0 | BS ISO 12619-2 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH[2]) AND HYDROGEN/METHANE BLENDS FUEL COMPONENTS - PART 2: PERFORMANCE AND GENERAL TEST METHODS |
16/30342629 DC : 0 | BS ISO 12619-9 - ROAD VEHICLES - COMPRESSED NATURAL GAS (CNG) FUEL SYSTEM COMPONENTS - PART 9: PRESSURE RELIEF VALVE (PRV) |
BS EN ISO 10961:2012 | Gas cylinders. Cylinder bundles. Design, manufacture, testing and inspection |
PREN 14129 : DRAFT 2011 | LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG TANKS |
BS ISO 21011:2008 | Cryogenic vessels. Valves for cryogenic service |
17/30362705 DC : 0 | BS EN 15202 - LPG EQUIPMENT AND ACCESSORIES - ESSENTIAL OPERATIONAL DIMENSIONS FOR LPG CYLINDER VALVE OUTLET AND ASSOCIATED EQUIPMENT CONNECTIONS |
16/30321031 DC : 0 | BS ISO 12619-6 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH[2]) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 6: AUTOMATIC VALVE |
BS ISO 12619-16:2017 | Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components Fittings |
10/30227668 DC : 0 | BS EN 14678-3 - LPG EQUIPMENT AND ACCESSORIES - PART 3: REFUELLING INSTALLATIONS AT PRIVATE AND INDUSTRIAL PREMISES |
15/30315879 DC : 0 | BS ISO 12619-2:2014/AMD 1 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH2) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 2: PERFORMANCE AND GENERAL TEST METHODS |
DIN EN ISO 13293:2013-03 | RECREATIONAL DIVING SERVICES - REQUIREMENTS FOR GAS BLENDER TRAINING PROGRAMMES (ISO 13293:2012) |
10/30227671 DC : 0 | BS EN 14678-1 - LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS |
BS ISO 12619-12:2017 | Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components Gas-tight housing and ventilation hoses |
14/30281578 DC : 0 | BS ISO 14456 - GAS CYLINDERS - GAS PROPERTIES AND ASSOCIATED CLASSIFICATION (FTSC) CODES |
BS EN 16509:2014 | Transportable gas cylinders. Non-refillable, small transportable, steel cylinders of capacities up to and including 120 ml containing compressed or liquefied gases (compact cylinders). Design, construction, filling and testing |
12/30250279 DC : 0 | BS EN 12252 - LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS |
PD ISO/TS 19883:2017 | Safety of pressure swing adsorption systems for hydrogen separation and purification |
09/30202307 DC : 0 | BS EN 12514-1 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 1: SAFETY REQUIREMENTS AND TESTS - TERMINOLOGY, GENERAL REQUIREMENTS |
I.S. EN 14678-3:2013 | LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 3: REFUELLING INSTALLATIONS AT COMMERCIAL AND INDUSTRIAL PREMISES |
I.S. EN ISO 25760:2015 | GAS CYLINDERS - OPERATIONAL PROCEDURES FOR THE SAFE REMOVAL OF VALVES FROM GAS CYLINDERS (ISO 25760:2009) |
ISO 21010:2017 | Cryogenic vessels — Gas/material compatibility |
ISO 12619-13:2017 | Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 13: Rigid fuel line in stainless steel |
I.S. EN 16119:2013 | LPG EQUIPMENT AND ACCESSORIES - SEALING CAPS AND PLUGS FOR LPG CYLINDER AND PRESSURE VESSEL VALVES - SPECIFICATION AND TESTING |
UNI EN 13175 : 2015 | LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS |
BS EN ISO 7396-1:2016 | Medical gas pipeline systems Pipeline systems for compressed medical gases and vacuum |
ISO 12619-16:2017 | Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 16: Fittings |
I.S. EN 13175:2014 | LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS |
ONORM EN ISO 15245-1 : 2013 | GAS CYLINDERS - PARALLEL THREADS FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATION (ISO 15245-1:2001 + AMD 1:2013) |
ISO 21172-1:2015 | Gas cylinders Welded steel pressure drums up to 3 000 litres capacity for the transport of gases Design and construction Part 1: Capacities up to 1 000 litres |
ISO 12619-11:2017 | Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 11: Excess flow valve |
UNE-EN ISO 17879:2017 | Gas cylinders - Self-closing cylinder valves - Specification and type testing (ISO 17879:2017) |
BS EN 13175:2014 | LPG Equipment and accessories. Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings |
UNE-EN 16119:2013 | LPG equipment and accessories - Sealing caps and plugs for LPG cylinder and pressure vessel valves - Specification and testing |
I.S. EN ISO 9539:2010 | GAS WELDING EQUIPMENT - MATERIALS FOR EQUIPMENT USED IN GAS WELDING, CUTTING AND ALLIED PROCESSES (ISO 9539:2010) |
EN 15202:2012 | LPG equipment and accessories - Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections |
I.S. EN 15202:2012 | LPG EQUIPMENT AND ACCESSORIES - ESSENTIAL OPERATIONAL DIMENSIONS FOR LPG CYLINDER VALVE OUTLET AND ASSOCIATED EQUIPMENT CONNECTIONS |
DIN EN ISO 11114-1:2012-07 | GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 1: METALLIC MATERIALS (ISO 11114-1:2012 + AMD.1:2017) |
DIN EN 14678-2:2012-04 | LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 2: Components other than dispensers and installation requirements (includes Amendment A1:2012) |
BS EN ISO 11623:2015 | Gas cylinders. Composite construction. Periodic inspection and testing |
BS EN 14208:2004 | Transportable gas cylinders. Specification for welded pressure drums up to 1000 litre capacity for the transport of gases. Design and construction |
BS EN 12863:2002 | Transportable gas cylinders. Periodic inspection and maintenance of dissolved acetylene cylinders |
ISO 13341:2010 | Gas cylinders — Fitting of valves to gas cylinders |
BS EN 13807:2017 | Transportable gas cylinders. Battery vehicles and multiple-element gas containers (MEGCs). Design, manufacture, identification and testing |
DIN EN 14893:2014-09 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
BS EN 14678-2 : 2007 | LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 2: COMPONENTS OTHER THAN DISPENSERS AND INSTALLATION REQUIREMENTS |
BS EN 15202:2012 | LPG equipment and accessories. Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections |
BS EN ISO 11114-3:2010 | Gas cylinders. Compatibility of cylinder and valve materials with gas contents Autogenous ignition test for non-metallic materials in oxygen atmosphere |
BS EN 13760:2003 | Automotive LPG filling system for light and heavy duty vehicles. Nozzle, test requirements and dimensions |
DIN EN 12863:2002-09 | TRANSPORTABLE GAS CYLINDERS - PERIODIC INSPECTION AND MAINTENANCE OF DISSOLVED ACETYLENE CYLINDERS |
I.S. EN 14678-2:2007 | LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 2: COMPONENTS OTHER THAN DISPENSERS AND INSTALLATION REQUIREMENTS |
I.S. EN ISO 11623:2015 | GAS CYLINDERS - COMPOSITE CONSTRUCTION - PERIODIC INSPECTION AND TESTING (ISO 11623:2015, CORRECTED VERSION 2017-02) |
ONORM EN 13953 : 2015 | LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR TRANSPORTABLE REFILLABLE CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) |
DIN EN ISO 10692-2:2003-04 | GAS CYLINDERS - GAS CYLINDER VALVE CONNECTIONS FOR USE IN THE MICROELECTRONIC INDUSTRY - PART 2: SPECIFICATION AND TYPE TESTING FOR VALVE TO CYLINDER CONNECTIONS |
I.S. EN 13760:2003 | AUTOMOTIVE LPG FILLING SYSTEM FOR LIGHT AND HEAVY DUTY VEHICLES - NOZZLE, TEST REQUIREMENTS AND DIMENSIONS |
ONORM EN 12245 : 2012 | TRANSPORTABLE GAS CYLINDERS - FULLY WRAPPED COMPOSITE CYLINDERS |
DIN EN 16119:2013-05 | LPG equipment and accessories - Sealing caps and plugs for LPG cylinder and pressure vessel valves - Specification and testing |
DIN EN 14678-3:2013-03 | LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 3: REFUELLING INSTALLATIONS AT COMMERCIAL AND INDUSTRIAL PREMISES |
15/30309725 DC : 0 | BS ISO 19016 - GAS CYLINDERS - CYLINDERS AND TUBES OF COMPOSITE CONSTRUCTION - MODAL ACOUSTIC EMISSION (MAE) TESTING FOR PERIODIC INSPECTION AND TESTING |
08/30167437 DC : DRAFT JAN 2008 | BS EN ISO 28622 - PRESSURE RELIEF VALVES FOR TRANSPORTABLE REFILLABLE CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) |
18/30347942 DC : DRAFT APR 2018 | BS ISO 20766-9 - ROAD VEHICLES - LIQUEFIED PETROLEUM GAS (LPG) FUEL SYSTEMS COMPONENTS - PART 9: PRESSURE RELIEVE DEVICE (PRD) |
13/30248693 DC : 0 | BS EN 14893 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
17/30293100 DC : 0 | BS ISO 19882 - GASEOUS HYDROGEN - THERMALLY ACTIVATED PRESSURE RELIEF DEVICES FOR COMPRESSED HYDROGEN VEHICLE FUEL CONTAINERS |
16/30342728 DC : 0 | BS ISO 12619-8 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH2) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 8: PRESSURE INDICATOR |
PREN ISO 11114-3 : DRAFT 2008 | TRANSPORTABLE GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 3: AUTOGENEOUS IGNITION TEST IN OXYGEN ATMOSPHERE |
16/30301299 DC : 0 | BS EN ISO 17879 - GAS CYLINDERS - SELF-CLOSING CYLINDER VALVES - SPECIFICATION AND TYPE TESTING |
BS ISO 24431:2006 | Gas cylinders. Cylinders for compressed and liquefied gases (excluding acetylene). Inspection at the time of filling |
ISO 21013-2:2007 | Cryogenic vessels Pressure-relief accessories for cryogenic service Part 2: Non-reclosable pressure-relief devices |
17/30347933 DC : 0 | BS ISO 20766-4 - ROAD VEHICLES - LIQUEFIED PETROLEUM GAS (LPG) FUEL SYSTEM COMPONENTS - PART 4: LEVEL INDICATOR |
12/30265334 DC : 0 | BS EN 13953 - LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR TRANSPORTABLE REFILLABLE CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) |
BS ISO 10961 : 2010 | GAS CYLINDERS - CYLINDER BUNDLES - DESIGN, MANUFACTURE, TESTING AND INSPECTION |
16/30343646 DC : 0 | BS ISO 12619-16 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH2) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 16: FITTINGS |
11/30248684 DC : 0 | BS EN 14129 - LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG TANKS |
EN ISO 7396-1:2016 | Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum (ISO 7396-1:2016) |
BS ISO 12619-8:2017 | Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components Pressure indicator |
17/30347930 DC : 0 | BS ISO 20766-3 - ROAD VEHICLES - LIQUEFIED PETROLEUM GAS (LPG) FUEL SYSTEMS COMPONENTS - PART 3: 80% STOP VALVE |
BS EN 14678-3:2013 | LPG equipment and accessories. Construction and performance of LPG equipment for automotive filling stations Refuelling installations at commercial and industrial premises |
BS ISO 12619-6:2017 | Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blend fuel system components Automatic valve |
EN ISO 15995:2010 | Gas cylinders - Specifications and testing of LPG cylinder valves - Manually operated (ISO 15995:2006) |
UNI EN ISO 9539 : 2014 | GAS WELDING EQUIPMENT - MATERIALS FOR EQUIPMENT USED IN GAS WELDING, CUTTING AND ALLIED PROCESSES |
BS ISO 12619-11:2017 | Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components Excess flow valve |
UNI EN 16119 : 2013 | LPG EQUIPMENT AND ACCESSORIES - SEALING CAPS AND PLUGS FOR LPG CYLINDER AND PRESSURE VESSEL VALVES - SPECIFICATION AND TESTING |
06/30154011 DC : DRAFT JULY 2006 | ISO 21013-1 - CRYOGENIC VESSELS - PRESSURE RELIEF ACCESSORIES FOR - CRYOGENIC SERVICE - PART 1: RECLOSABLE PRESSURE RELIEF VALVES |
NF EN ISO 14245 : 2011 | GAS CYLINDERS - SPECIFICATIONS AND TESTING OF LPG CYLINDER VALVES - SELF-CLOSING |
15/30296830 DC : 0 | BS EN ISO 18119 - GAS CYLINDERS - SEAMLESS STEEL AND SEAMLESS ALUMINIUM-ALLOY GAS CYLINDERS AND TUBES - PERIODIC INSPECTION AND TESTING |
04/19971661 DC : DRAFT APR 2004 | BS ISO 15995 - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) CYLINDER VALVES - MANUALLY OPERATED |
ISO 21011:2008 | Cryogenic vessels — Valves for cryogenic service |
08/30149718 DC : DRAFT JULY 2008 | BS EN ISO 13341 - TRANSPORTABLE GAS CYLINDERS - FITTING OF VALVES TO GAS CYLINDERS |
04/30077792 DC : DRAFT JUL 2004 | ISO 3500 - GAS CYLINDERS - SEAMLESS STEEL CO[2] CYLINDERS FOR FIXED FIRE-FIGHTING INSTALLATIONS ON SHIPS |
15/30280941 DC : 0 | BS EN ISO 24431 - GAS CYLINDERS - CYLINDERS FOR COMPRESSED AND LIQUEFIED GASES (EXCLUDING ACETYLENE) - INSPECTION AT TIME OF FILLING |
ISO 11119-3:2013 | Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450L with non-load-sharing metallic or non-metallic liners |
ISO 14245:2006 | Gas cylinders Specifications and testing of LPG cylinder valves Self-closing |
DIN EN 14893 E : 2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
I.S. EN ISO 7396-1:2016 | MEDICAL GAS PIPELINE SYSTEMS - PART 1: PIPELINE SYSTEMS FOR COMPRESSED MEDICAL GASES AND VACUUM (ISO 7396-1:2016) |
BS EN ISO 9539 : 2010 | GAS WELDING EQUIPMENT- MATERIALS FOR EQUIPMENT USED IN GAS WELDING, CUTTING AND ALLIED PROCESSES |
I.S. EN 14071:2015 | LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS - ANCILLARY EQUIPMENT |
I.S. EN 16509:2014 | TRANSPORTABLE GAS CYLINDERS - NON-REFILLABLE, SMALL TRANSPORTABLE, STEEL CYLINDERS OF CAPACITIES UP TO AND INCLUDING 120 ML CONTAINING COMPRESSED OR LIQUEFIED GASES (COMPACT CYLINDERS) - DESIGN, CONSTRUCTION, FILLING AND TESTING |
BS EN ISO 15996:2017 | Gas cylinders. Residual pressure valves. Specification and type testing of cylinder valves incorporating residual pressure devices |
BS ISO 12619-2 : 2014 | ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH[2]) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 2: PERFORMANCE AND GENERAL TEST METHODS |
BS ISO 12619-3 : 2014 | ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH[2]) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 3: PRESSURE REGULATOR |
UNE-EN ISO 13293:2013 | Recreational diving services - Requirements for gas blender training programmes (ISO 13293:2012) |
ISO 12619-3:2014 | Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 3: Pressure regulator |
ISO/TS 19883:2017 | Safety of pressure swing adsorption systems for hydrogen separation and purification |
UNE-EN 14678-2:2009 | LPG equipment and accessories - Equipment for Liquefied Petroleum Gas automotive filling stations - Part 2: Components other than dispensers, and installation requirements |
ISO 11119-2:2012 | Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners |
UNE-EN 14071:2015 | LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Ancillary equipment |
BS EN 14071:2015 | LPG equipment and accessories. Pressure relief valves for LPG pressure vessels. Ancillary equipment |
UNI EN ISO 15245-1 : 2013 | GAS CYLINDERS - PARALLEL THREADS FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATION |
EN ISO 10961:2012 | Gas cylinders - Cylinder bundles - Design, manufacture, testing and inspection (ISO 10961:2010) |
EN 14071:2015 | LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Ancillary equipment |
PREN ISO 12209 : DRAFT 2012 | GAS CYLINDERS - OUTLET CONNECTIONS FOR GAS CYLINDER VALVES FOR COMPRESSED BREATHABLE AIR (ISO/DIS 12209:2012) |
DIN EN 12252:2014-07 | LPG equipment and accessories - Equipping of LPG road tankers |
DIN EN ISO 22435:2013-03 | GAS CYLINDERS - CYLINDER VALVES WITH INTEGRATED PRESSURE REGULATORS - SPECIFICATION AND TYPE TESTING (ISO 22435:2007 + AMD.1:2012) |
UNE-EN ISO 13341:2011 | Gas cylinders - Fitting of valves to gas cylinders (ISO 13341:2010) |
DIN EN 14427:2014-09 | LPG equipment and accessories - Transportable refillable fully wrapped composite cylinders for LPG - Design and construction |
BS EN 12252:2014 | LPG equipment and accessories. Equipping of LPG road tankers |
BS EN 1968:2002 | Transportable gas cylinders. Periodic inspection and testing of seamless steel gas cylinders |
UNE-EN 13799:2012 | LPG equipment and accessories - Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels |
BS EN ISO 13341 : 2010 | GAS CYLINDERS - FITTING OF VALVES TO GAS CYLINDERS |
ISO 12209:2013 | Gas cylinders — Outlet connections for gas cylinder valves for compressed breathable air |
17/30362889 DC : 0 | BS EN 13175 - LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS |
BS EN 1797:2001 | Cryogenic vessels. Gas/material compatibility |
I.S. EN ISO 11114-1:2012 | GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 1: METALLIC MATERIALS (ISO 11114-1:2012) |
I.S. EN 14678-1:2013 | LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS |
EN 13953:2015 | LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG) |
I.S. EN 13953:2015 | LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR TRANSPORTABLE REFILLABLE CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) |
I.S. EN 13799:2012 | LPG EQUIPMENT AND ACCESSORIES - CONTENTS GAUGES FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSELS |
I.S. EN ISO 13341:2010 | GAS CYLINDERS - FITTING OF VALVES TO GAS CYLINDERS (ISO 13341:2010) |
I.S. EN 14129:2014 | LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS |
I.S. EN ISO 14113:2013 | GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) (ISO 14113:2013) |
I.S. EN 13807:2017 | TRANSPORTABLE GAS CYLINDERS - BATTERY VEHICLES - DESIGN, MANUFACTURE, IDENTIFICATION AND TESTING |
DIN EN 12252:2000-10 | LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS |
I.S. EN ISO 11114-3:2010 | GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 3: AUTOGENOUS IGNITION TEST FOR NON-METALLIC MATERIALS IN OXYGEN ATMOSPHERE |
I.S. EN 14893:2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
I.S. EN 12252:2014 | LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS |
I.S. EN ISO 10297:2014 | GAS CYLINDERS - CYLINDER VALVES - SPECIFICATION AND TYPE TESTING (ISO 10297:2014, CORRECTED VERSION 2014-11-01) |
I.S. EN 14427:2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE FULLY WRAPPED COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
I.S. EN 12245:2009 | TRANSPORTABLE GAS CYLINDERS - FULLY WRAPPED COMPOSITE CYLINDERS |
UNE-EN ISO 24431:2017 | Gas cylinders - Seamless, welded and composite cylinders for compressed and liquefied gases (excluding acetylene) - Inspection at time of filling (ISO 24431:2016) |
PREN 13953 : DRAFT 2012 | LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR TRANSPORTABLE REFILLABLE CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) |
17/30362339 DC : 0 | BS ISO 16964 - GAS CYLINDERS - FLEXIBLE HOSES ASSEMBLIES - SPECIFICATION AND TESTING |
10/30197274 DC : 0 | BS ISO 21013-4 - CRYOGENIC VESSELS - PILOT OPERATED PRESSURE RELIEF DEVICES - PART 4: PRESSURE-RELIEF ACCESSORIES FOR CRYOGENIC SERVICE |
PREN 14678-1 : DRAFT 2010 | LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS |
10/30218988 DC : 0 | BS EN 13175 - LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) TANK VALVES AND FITTINGS |
UNI EN ISO 10961 : 2012 | GAS CYLINDERS - CYLINDER BUNDLES - DESIGN, MANUFACTURE, TESTING AND INSPECTION |
16/30343643 DC : 0 | BS ISO 12619-15 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH2) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 15: FILTER |
17/30341479 DC : 0 | BS ISO 16111 - TRANSPORTABLE GAS STORAGE DEVICES - HYDROGEN ABSORBED IN REVERSIBLE METAL HYDRIDE |
14/30300117 DC : 0 | BS EN 13175 - LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS |
I.S. EN 12863:2002 | TRANSPORTABLE GAS CYLINDERS - PERIODIC INSPECTION AND MAINTENANCE OF DISSOLVED ACETYLENE CYLINDERS |
18/30347939 DC : DRAFT APR 2018 | BS ISO 20766-6 - ROAD VEHICLES - LIQUEFIED PETROLEUM GAS (LPG) FUEL SYSTEMS COMPONENTS - PART 6: PRESSURE RELIEF VALVES (PRV) |
BS ISO 21172-1:2015 | Gas cylinders. Welded steel pressure drums up to 3 000 litres capacity for the transport of gases. Design and construction Capacities up to 1 000 litres |
I.S. EN ISO 14245:2010 | GAS CYLINDERS - SPECIFICATIONS AND TESTING OF LPG CYLINDER VALVES - SELF-CLOSING |
DIN EN ISO 14245:2010-11 | GAS CYLINDERS - SPECIFICATIONS AND TESTING OF LPG CYLINDER VALVES - SELF-CLOSING |
09/30205570 DC : 0 | BS EN 13799 - LPG EQUIPMENT AND ACCESSORIES - CONTENTS GAUGES FOR LPG TANKS |
BS EN ISO 15995:2010 | Gas cylinders. Specifications and testing of LPG cylinder valves. Manually operated |
16/30343631 DC : 0 | BS ISO 12619-11 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH2) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 11: EXCESS FLOW VALVE |
12/30246391 DC : DRAFT JULY 2012 | BS ISO 10297 - GAS CYLINDERS - CYLINDER VALVES - SPECIFICATION AND TYPE TESTING |
BS ISO 12619-9:2017 | Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components Pressure relief valve (PRV) |
17/30342725 DC : 0 | BS ISO 12619-7 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH[2]) AND HYDROGEN/NATURAL GAS BLENDS FUEL SYSTEM COMPONENTS - PART 7: GAS INJECTOR |
BS ISO 16111:2008 | Transportable gas storage devices. Hydrogen absorbed in reversible metal hydride |
14/30287821 DC : 0 | BS EN 13807 - TRANSPORTABLE GAS CYLINDERS - BATTERY VEHICLES - DESIGN, MANUFACTURE, IDENTIFICATION AND TESTING |
I.S. EN 14876:2007 | TRANSPORTABLE GAS CYLINDERS - PERIODIC INSPECTION AND TESTING OF WELDED STEEL PRESSURE DRUMS |
16/30342632 DC : 0 | BS ISO 12619-10 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH2) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 10: PRESSURE RELIEF VALVE (PRD) |
16/30343634 DC : 0 | BS ISO 12619-12 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH2) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 12: GAS-TIGHT HOUSING AND VENTILATION HOSES |
17/30359995 DC : 0 | BS ISO 21266-2 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH[2]) AND HYDROGEN/NATURAL GAS BLENDS FUEL SYSTEMS - PART 2: TEST METHODS |
BS ISO 21013-1:2008 | Cryogenic vessels. Pressure-relief accessories for cryogenic service Reclosable pressure-relief valves |
08/30195387 DC : 0 | BS EN ISO 11114-3 - TRANSPORTABLE GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 3: AUTOGENEOUS IGNITION TEST IN OXYGEN ATMOSPHERE |
BS ISO 12619-7:2017 | Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components Gas injector |
SAE AIR 6464 : 2013 | EUROCAE/SAE WG80/AE-7AFC HYDROGEN FUEL CELLS AIRCRAFT FUEL CELL SAFETY GUIDELINES |
ISO/TS 19880-1:2016 | Gaseous hydrogen Fuelling stations Part 1: General requirements |
I.S. EN ISO 17879:2017 | GAS CYLINDERS - SELF-CLOSING CYLINDER VALVES - SPECIFICATION AND TYPE TESTING (ISO 17879:2017) |
BS ISO 3500 : 2005 | GAS CYLINDERS - SEAMLESS STEEL CO[2] CYLINDERS FOR FIXED FIRE-FIGHTING INSTALLATIONS ON SHIPS |
ISO 11119-1:2012 | Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 1: Hoop wrapped fibre reinforced composite gas cylinders and tubes up to 450 l |
ISO 18119:2018 | Gas cylinders — Seamless steel and seamless aluminium-alloy gas cylinders and tubes — Periodic inspection and testing |
EN ISO 17879:2017 | Gas cylinders - Self-closing cylinder valves - Specification and type testing (ISO 17879:2017) |
DIN EN ISO 7396-1:2016-09 | MEDICAL GAS PIPELINE SYSTEMS - PART 1: PIPELINE SYSTEMS FOR COMPRESSED MEDICAL GASES AND VACUUM (ISO 7396-1:2016) |
ISO 12619-6:2017 | Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 6: Automatic valve |
UNI EN 14678-3 : 2013 | LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 3: REFUELLING INSTALLATIONS AT COMMERCIAL AND INDUSTRIAL PREMISES |
I.S. EN ISO 15996:2017 | GAS CYLINDERS - RESIDUAL PRESSURE VALVES - SPECIFICATION AND TYPE TESTING OF CYLINDER VALVES INCORPORATING RESIDUAL PRESSURE DEVICES (ISO 15996:2017) |
EN ISO 14245:2010 | Gas cylinders - Specifications and testing of LPG cylinder valves - Self-closing (ISO 14245:2006) |
ISO 16111:2008 | Transportable gas storage devices Hydrogen absorbed in reversible metal hydride |
DIN EN 12863:2006-02 | TRANSPORTABLE GAS CYLINDERS - PERIODIC INSPECTION AND MAINTENANCE OF DISSOLVED ACETYLENE CYLINDERS |
DIN EN 1968:2005-12 | TRANSPORTABLE GAS CYLINDERS - PERIODIC INSPECTION AND TESTING OF SEAMLESS STEEL GAS CYLINDERS |
DIN EN 12245:2012-03 | Transportable gas cylinders - Fully wrapped composite cylinders (includes Amendment A1:2011) |
DIN EN ISO 14113:2014-02 | GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) (ISO 14113:2013) |
DIN EN ISO 15245-1:2013-11 | Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification (ISO 15245-1:2001 + Amd 1:2013) (includes Amendment A1:2013) |
DIN EN 13807:2016-02 (Draft) | TRANSPORTABLE GAS CYLINDERS - BATTERY VEHICLES AND MULTIPLE-ELEMENT GAS CONTAINERS (MEGCS) - DESIGN, MANUFACTURE, IDENTIFICATION AND TESTING |
BS EN ISO 15245-1 : 2001 | GAS CYLINDERS - PARALLEL THREADS FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATION |
BS EN 1919:2000 | Transportable gas cylinders. Cylinders for liquefied gases (excluding acetylene and LPG). Inspection at time of filling |
UNE-EN 14678-1:2013 | LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers |
UNE-EN 13953:2015 | LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG) |
UNE-EN 13807:2017 | Transportable gas cylinders - Battery vehicles and multiple-element gas containers (MEGCs) - Design, manufacture, identification and testing |
UNI EN 15202 : 2012 | LPG EQUIPMENT AND ACCESSORIES - ESSENTIAL OPERATIONAL DIMENSIONS FOR LPG CYLINDER VALVE OUTLET AND ASSOCIATED EQUIPMENT CONNECTIONS |
ISO 9539:2010 | Gas welding equipment Materials for equipment used in gas welding, cutting and allied processes |
18/30359998 DC : 0 | BS ISO 19880-1 - GASEOUS HYDROGEN - FUELLING STATIONS - PART 1: GENERAL REQUIREMENTS |
I.S. EN 1802:2002 | TRANSPORTABLE GAS CYLINDERS - PERIODIC INSPECTION AND TESTING OF SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS |
I.S. EN 1803:2002 | TRANSPORTABLE GAS CYLINDERS - PERIODIC INSPECTION AND TESTING OF WELDED CARBON STEEL GAS CYLINDERS |
EN 14678-1:2013 | LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers |
EN ISO 24431:2016 | Gas cylinders - Seamless, welded and composite cylinders for compressed and liquefied gases (excluding acetylene) - Inspection at time of filling (ISO 24431:2016) |
UNI EN 13799 : 2012 | LPG EQUIPMENT AND ACCESSORIES - CONTENTS GAUGES FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSELS |
UNI EN ISO 14113 : 2013 | GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) |
UNI EN ISO 11114-3 : 2011 | GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 3: AUTOGENOUS IGNITION TEST FOR NON-METALLIC MATERIALS IN OXYGEN ATMOSPHERE |
UNI EN 14893 : 2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
UNI EN 14427 : 2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE FULLY WRAPPED COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
UNI EN 12245 : 2011 | TRANSPORTABLE GAS CYLINDERS - FULLY WRAPPED COMPOSITE CYLINDERS |
UNI EN 14129 : 2014 | LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS |
UNI EN 14678-2 : 2012 | LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 2: COMPONENTS OTHER THAN DISPENSERS AND INSTALLATION REQUIREMENTS |
UNI EN ISO 22435 : 2013 | GAS CYLINDERS - CYLINDER VALVES WITH INTEGRATED PRESSURE REGULATORS - SPECIFICATION AND TYPE TESTING |
UNI EN 14678-1 : 2013 | LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS |
UNI EN 12252 : 2014 | LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS |
ONORM EN 14427 : 2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE FULLY WRAPPED COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
UNE-EN 16509:2015 | Transportable gas cylinders - Non-refillable, small transportable, steel cylinders of capacities up to and including 120 ml containing compressed or liquefied gases (compact cylinders) - Design, construction, filling and testing |
BS ISO 15995:2006 | Gas cylinders. Specification and testing of LPG cylinder valves. Manually operated |
10/30218991 DC : 0 | BS EN 16119 - LPG EQUIPMENT AND ACCESSORIES - SEALING CAPS AND PLUGS FOR CYLINDER AND TANK VALVES - SPECIFICATION AND TESTING |
ISO 14456:2015 | Gas cylinders — Gas properties and associated classification (FTSC) codes |
BS ISO 25760 : 2009 | GAS CYLINDERS - OPERATIONAL PROCEDURES FOR THE SAFE REMOVAL OF VALVES FROM GAS CYLINDERS |
17/30342698 DC : DRAFT SEP 2017 | BS EN ISO 10460 - GAS CYLINDERS - WELDED ALUMINIUM-ALLOY, CARBON AND STAINLESS STEEL GAS CYLINDERS - PERIODIC INSPECTION AND TESTING |
BS ISO 12619-10:2017 | Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components Pressure relief device (PRD) |
08/30190636 DC : DRAFT OCT 2008 | BS ISO 10961 - GAS CYLINDERS - CYLINDER BUNDLES - DESIGN, MANUFACTURE, IDENTIFICATION AND TESTING |
BS ISO 12619-15:2017 | Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components Filter |
11/30204154 DC : 0 | BS EN ISO 13293 - RECREATIONAL DIVING SERVICES - REQUIREMENTS FOR GAS BLENDER TRAINING PROGRAMMES |
PREN 13807 : DRAFT 2014 | TRANSPORTABLE GAS CYLINDERS - BATTERY VEHICLES - DESIGN, MANUFACTURE, IDENTIFICATION AND TESTING |
08/30166803 DC : DRAFT FEB 2008 | BS EN ISO 9539 - MATERIALS FOR EQUIPMENT USED IN GAS WELDING, CUTTING AND ALLIED PROCESSES |
BS EN ISO 14245:2010 | Gas cylinders. Specifications and testing of LPG cylinder valves. Self-closing |
12/30266928 DC : 0 | BS EN 14071 - LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS - ANCILLARY EQUIPMENT |
10/30196135 DC : 0 | BS ISO 11515 - GAS CYLINDERS - REFILABLE COMPOSITE REINFORCED TUBES OF WATER CAPACITY BETWEEN 150 L AND 3000 L - DESIGN, CONSTRUCTION AND TESTING |
BS EN ISO 13293:2012 | Recreational diving services. Requirements for gas blender training programmes |
12/30230931 DC : 0 | BS EN ISO 11623 - GAS CYLINDERS - COMPOSITE CONSTRUCTION - PERIODIC INSPECTION AND TESTING |
BS ISO 12619-13:2017 | Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components Rigid fuel line in stainless steel |
13/30281067 DC : 0 | BS EN 12252 - LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS |
BS EN ISO 17879:2017 | Gas cylinders. Self-closing cylinder valves. Specification and type testing |
DIN EN ISO 25760:2015-04 | Gas cylinders - Operational procedures for the safe removal of valves from gas cylinders (ISO 25760:2009) |
BS EN ISO 12209 : 2013 | GAS CYLINDERS - OUTLET CONNECTIONS FOR GAS CYLINDER VALVES FOR COMPRESSED BREATHABLE AIR (ISO 12209:2013) |
16/30343637 DC : 0 | BS ISO 12619-13 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH2) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 13: RIGID FUEL LINE IN STAINLESS STEEL |
13/30247203 DC : 0 | BS ISO 16964 - GAS CYLINDERS - FLEXIBLE HOSES ASSEMBLIES - SPECIFICATION AND TESTING |
UNE-EN 13175:2015 | LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings |
BS EN ISO 11118:2015 | Gas cylinders. Non-refillable metallic gas cylinders. Specification and test methods |
UNI EN 16509 : 2014 | TRANSPORTABLE GAS CYLINDERS - NON-REFILLABLE, SMALL TRANSPORTABLE, STEEL CYLINDERS OF CAPACITIES UP TO AND INCLUDING 120 ML CONTAINING COMPRESSED OR LIQUEFIED GASES (COMPACT CYLINDERS) - DESIGN, CONSTRUCTION, FILLING AND TESTING |
BS ISO 14245:2006 | Gas cylinders. Specification and testing of LPG cylinder valves. Self-closing |
UNE-EN ISO 9539:2011 | Gas welding equipment - Materials for equipment used in gas welding, cutting and allied processes (ISO 9539:2010) |
I.S. EN ISO 15245-1:2002 | GAS CYLINDERS - PARALLEL THREADS FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATION (ISO 15245-1:2001) |
UNE-EN ISO 11118:2016 | Gas cylinders - Non-refillable metallic gas cylinders - Specification and test methods (ISO 11118:2015) |
UNI EN ISO 15995 : 2010 | GAS CYLINDERS - SPECIFICATIONS AND TESTING OF LPG CYLINDER VALVES - MANUALLY OPERATED |
AAGSP-11 : 2017 | GUIDE OF LUBRICANTS FOR USE IN OXYGEN SYSTEMS AND USE OF MATERIALS IN OXYGEN RICH ENVIRONMENTS |
BS ISO 16964:2015 | Gas cylinders. Flexible hoses assemblies. Specification and testing |
ISO 10460:2005 | Gas cylinders Welded carbon-steel gas cylinders Periodic inspection and testing |
I.S. EN ISO 24431:2016 | GAS CYLINDERS - SEAMLESS, WELDED AND COMPOSITE CYLINDERS FOR COMPRESSED AND LIQUEFIED GASES (EXCLUDING ACETYLENE) - INSPECTION AT TIME OF FILLING (ISO 24431:2016) |
ISO 21013-4:2012 | Cryogenic vessels — Pilot operated pressure relief devices — Part 4: Pressure-relief accessories for cryogenic service |
ISO 12619-12:2017 | Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 12: Gas-tight housing and ventilation hoses |
ISO 12619-9:2017 | Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 9: Pressure relief valve (PRV) |
I.S. EN ISO 10961:2012 | GAS CYLINDERS - CYLINDER BUNDLES - DESIGN, MANUFACTURE, TESTING AND INSPECTION (ISO 10961:2010) |
ISO 12619-10:2017 | Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 10: Pressure relief device (PRD) |
BS ISO 21013-4:2012 | Cryogenic vessels. Pilot operated pressure-relief devices Pressure-relief accessories for cryogenic service |
PREN ISO 11623 : DRAFT 2012 | GAS CYLINDERS - COMPOSITE CONSTRUCTION - PERIODIC INSPECTION AND TESTING (ISO/DIS 11623:2012) |
BS EN ISO 14456:2016 | Gas cylinders. Gas properties and associated classification (FTSC) codes |
DIN EN 14071:2015-08 | LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS - ANCILLARY EQUIPMENT |
ISO 12619-8:2017 | Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 8: Pressure indicator |
ONORM EN ISO 14245 : 2010 | GAS CYLINDERS - SPECIFICATIONS AND TESTING OF LPG CYLINDER VALVES - SELF-CLOSING |
PREN 13799 : DRAFT 2009 | LPG EQUIPMENT AND ACCESSORIES - CONTENTS GAUGES FOR LPG TANKS |
PREN 14893 : DRAFT 2013 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
UNE-EN ISO 7396-1:2016 | Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum (ISO 7396-1:2016) |
DIN EN ISO 12209:2013-12 | GAS CYLINDERS - OUTLET CONNECTIONS FOR GAS CYLINDER VALVES FOR COMPRESSED BREATHABLE AIR (ISO 12209:2013 + AMD 1:2016, CORRECTED VERSION 2017-03) |
ISO 12619-2:2014 | Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 2: Performance and general test methods |
ONORM EN ISO 15995 : 2010 | GAS CYLINDERS - SPECIFICATIONS AND TESTING OF LPG CYLINDER VALVES - MANUALLY OPERATED |
ISO 11515:2013 | Gas cylinders — Refillable composite reinforced tubes of water capacity between 450 L and 3000 L — Design, construction and testing |
ISO 7396-1:2016 | Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum |
ISO 16964:2015 | Gas cylinders Flexible hoses assemblies Specification and testing |
I.S. EN ISO 15995:2010 | GAS CYLINDERS - SPECIFICATIONS AND TESTING OF LPG CYLINDER VALVES - MANUALLY OPERATED |
DIN EN 13769:2005-09 | TRANSPORTABLE GAS CYLINDERS - CYLINDER BUNDLES - DESIGN, MANUFACTURE, IDENTIFICATION AND TESTING |
DIN EN 13953:2015-05 | LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG) |
DIN EN 14129:2014-05 | LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS |
DIN EN 13799:2012-06 | LPG equipment and accessories - Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels |
BS EN 14129:2014 | LPG Equipment and accessories. Pressure relief valves for LPG pressure vessels |
ISO 10297:2014 | Gas cylinders — Cylinder valves — Specification and type testing |
ISO 25760:2009 | Gas cylinders — Operational procedures for the safe removal of valves from gas cylinders |
ISO 24431:2016 | Gas cylinders Seamless, welded and composite cylinders for compressed and liquefied gases (excluding acetylene) Inspection at time of filling |
UNE-EN ISO 10297:2015 | Gas cylinders - Cylinder valves - Specification and type testing (ISO 10297:2014, Corrected version 2014-11-01) |
BS EN 1920:2000 | Transportable gas cylinders. Cylinders for compressed gases (excluding acetylene). Inspection at time of filling |
BS EN ISO 22435 : 2007 | GAS CYLINDERS - CYLINDER VALVES WITH INTEGRATED PRESSURE REGULATORS - SPECIFICATION AND TYPE TESTING |
BS EN 14427:2014 | LPG equipment and accessories. Transportable refillable fully wrapped composite cylinders for LPG. Design and construction |
BS EN 13799:2012 | LPG equipment and accessories. Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels |
ISO 10692-2:2001 | Gas cylinders — Gas cylinder valve connections for use in the micro-electronics industry — Part 2: Specification and type testing for valve to cylinder connections |
UNE-EN ISO 14113:2013 | Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (ISO 14113:2013) |
UNE-EN ISO 12209:2014 | Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air (ISO 12209:2013) |
BS EN ISO 11114-1 : 2012 | GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 1: METALLIC MATERIALS (ISO 11114-1:2012) |
ISO 14113:2013 | Gas welding equipment — Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) |
ISO 11118:2015 | Gas cylinders — Non-refillable metallic gas cylinders — Specification and test methods |
BS EN 14876:2007 | Transportable gas cylinders. Periodic inspection and testing of welded steel pressure drums |
UNE-EN 14427:2014 | LPG equipment and accessories - Transportable refillable fully wrapped composite cylinders for LPG - Design and construction |
ISO 22734-2:2011 | Hydrogen generators using water electrolysis process Part 2: Residential applications |
ISO 15245-1:2001 | Gas cylinders Parallel threads for connection of valves to gas cylinders Part 1: Specification |
BS EN ISO 10692-2:2001 | Gas cylinders. Gas cylinder valve connections for use in the microelectronics industry Specification and type testing for valve to cylinder connections |
ISO 11114-1:2012 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 1: Metallic materials |
UNE-EN 12245:2009 | Transportable gas cylinders - Fully wrapped composite cylinders |
UNE-EN 15202:2012 | LPG equipment and accessories - Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections |
BS EN 13769:2003 | Transportable gas cylinders. Cylinder bundles. Design, manufacture, identification and testing |
BS EN 13953:2015 | LPG equipment and accessories. Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG) |
BS EN ISO 10297 : 2014 | GAS CYLINDERS - CYLINDER VALVES - SPECIFICATION AND TYPE TESTING |
09/30150663 DC : 0 | BS ISO 22734-2 - HYDROGEN GENERATORS USING WATER ELECTROLYSIS PROCESS - PART 2: RESIDENTIAL APPLICATIONS |
BS EN 14513:2005 | Transportable gas cylinders. Bursting disc pressure relief devices (excluding acetylene gas cylinders) |
EN ISO 11118 : 2015 COR 2015 | GAS CYLINDERS - NON-REFILLABLE METALLIC GAS CYLINDERS - SPECIFICATION AND TEST METHODS (ISO 11118:2015) |
ISO 13293:2012 | Recreational diving services — Requirements for gas blender training programmes |
BS ISO 22734-2:2011 | Hydrogen generators using water electrolysis process Residential applications |
ISO 22435:2007 | Gas cylinders — Cylinder valves with integrated pressure regulators — Specification and type testing |
ISO 10961:2010 | Gas cylinders Cylinder bundles Design, manufacture, testing and inspection |
BS EN 1802:2002 | Transportable gas cylinders. Periodic inspection and testing of seamless aluminium alloy gas cylinders |
BS EN 1803:2002 | Transportable gas cylinders. Periodic inspection and testing of welded carbon steel gas cylinders |
DIN EN 13769:2003-12 | TRANSPORTABLE GAS CYLINDERS - CYLINDER BUNDLES - DESIGN, MANUFACTURE, IDENTIFICATION AND TESTING |
EN 13799:2012 | LPG equipment and accessories - Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels |
EN 14893:2014 | LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres |
EN 1803:2002 | Transportable gas cylinders - Periodic inspection and testing of welded carbon steel gas cylinders |
EN 14427:2014 | LPG equipment and accessories - Transportable refillable fully wrapped composite cylinders for LPG - Design and construction |
EN ISO 13293:2012 | Recreational diving services - Requirements for gas blender training programmes (ISO 13293:2012) |
EN 16509:2014 | Transportable gas cylinders - Non-refillable, small transportable, steel cylinders of capacities up to and including 120 ml containing compressed or liquefied gases (compact cylinders) - Design, construction, filling and testing |
ONORM EN 16119 : 2013 | LPG EQUIPMENT AND ACCESSORIES - SEALING CAPS AND PLUGS FOR LPG CYLINDER AND PRESSURE VESSEL VALVES - SPECIFICATION AND TESTING |
EN ISO 11114-3:2010 | Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere (ISO 11114-3:2010) |
EN 14678-2:2007+A1:2012 | LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 2: Components other than dispensers and installation requirements |
EN 14129:2014 | LPG Equipment and accessories - Pressure relief valves for LPG pressure vessels |
EN 1802:2002 | Transportable gas cylinders - Periodic inspection and testing of seamless aluminium alloy gas cylinders |
EN 1797:2001 | Cryogenic vessels - Gas/material compatibility |
EN 14876:2007 | Transportable gas cylinders - Periodic inspection and testing of welded steel pressure drums |
EN 14513:2005 | Transportable gas cylinders - Bursting disc pressure relief devices (excluding acetylene gas cylinders) |
EN ISO 10692-2:2001 | Gas cylinders - Gas cylinder valve connections for use in the microelectronics industry - Part 2: Specification and type testing for valve to cylinder connections (ISO 10692-2:2001) |
EN ISO 14456:2016 | Gas cylinders - Gas properties and associated classification (FTSC) codes (ISO 14456:2015) |
EN 12245:2009+A1:2011 | Transportable gas cylinders - Fully wrapped composite cylinders |
EN 14678-3:2013 | LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 3: Refuelling installations at commercial and industrial premises |
EN ISO 11623:2015 | Gas cylinders - Composite construction - Periodic inspection and testing (ISO 11623:2015, Corrected version 2017-02) |
EN ISO 25760:2015 | Gas cylinders - Operational procedures for the safe removal of valves from gas cylinders (ISO 25760:2009) |
EN 14208:2004 | Transportable gas cylinders - Specification for welded pressure drums up to 1000 litre capacity for the transport of gases - Design and construction |
EN ISO 14113:2013 | Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (ISO 14113:2013) |
EN 13807:2017 | Transportable gas cylinders - Battery vehicles and multiple-element gas containers (MEGCs) - Design, manufacture, identification and testing |
AEP-42 : 2006 | GUIDE TO USE OF MATERIALS IN OXYGEN-ENRICHED ENVIRONMENTS |
04/30107772 DC : DRAFT JAN 2004 | PREN 14876 - TRANSPORTABLE GAS CYLINDERS - PERIODIC INSPECTION AND TESTING OF WELDED STEEL PRESSURE DRUMS |
PREN 12252 : DRAFT 2013 | LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS |
ISO 12619-7:2017 | Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 7: Gas injector |
UNE-EN ISO 14456:2017 | Gas cylinders - Gas properties and associated classification (FTSC) codes (ISO 14456:2015) |
UNE-EN 14893:2014 | LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres |
09/30198861 DC : 0 | BS EN ISO 11114-1 - TRANSPORTABLE GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 1: METALLIC MATERIALS |
UNI EN ISO 14245 : 2010 | GAS CYLINDERS - SPECIFICATIONS AND TESTING OF LPG CYLINDER VALVES - SELF-CLOSING |
12/30241747 DC : 0 | BS EN ISO 12209 - GAS CYLINDERS - OUTLET CONNECTIONS FOR GAS CYLINDER VALVES FOR COMPRESSED BREATHABLE AIR |
DIN EN ISO 9539:2014-04 | GAS WELDING EQUIPMENT - MATERIALS FOR EQUIPMENT USED IN GAS WELDING, CUTTING AND ALLIED PROCESSES (ISO 9539:2010 + AMD.1:2013) |
16/30343640 DC : 0 | BS ISO 12619-14 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH2) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 14: FLEXIBLE FUEL LINE |
04/30118084 DC : DRAFT AUG 2004 | ISO 21011 - CRYOGENIC VESSELS - VALVES FOR CRYOGENIC SERVICE |
10/30218994 DC : 0 | BS EN 15202 - LPG EQUIPMENT AND ACCESSORIES - ESSENTIAL OPERATIONAL DIMENSIONS FOR LPG CYLINDER VALVE OUTLET AND ASSOCIATED EQUIPMENT CONNECTIONS |
DIN EN ISO 10961:2012-06 | GAS CYLINDERS - CYLINDER BUNDLES - DESIGN, MANUFACTURE, TESTING AND INSPECTION (ISO 10961:2010) |
04/19971669 DC : DRAFT APR 2004 | BS ISO 14245 - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) CYLINDER VALVES - SELF CLOSING |
UNE-EN ISO 25760:2015 | Gas cylinders - Operational procedures for the safe removal of valves from gas cylinders (ISO 25760:2009) |
BS EN 16119:2013 | LPG equipment and accessories. Sealing caps and plugs for LPG cylinder and pressure vessel valves. Specification and testing |
13/30264471 DC : 0 | BS ISO 21172-1 - GAS CYLINDERS - WELDED STEEL PRESSURE DRUMS UP TO 3000 LITRES CAPACITY FOR THE TRANSPORT OF GASES - DESIGN AND CONSTRUCTION - PART 1: CAPACITIES UP TO 1000 LITRES |
18/30321883 DC : 0 | BS EN ISO 15995 - GAS CYLINDERS - SPECIFICATIONS AND TESTING OF LPG CYLINDER VALVES - MANUALLY OPERATED |
07/30148170 DC : 0 | BS ISO 16111 - TRANSPORTABLE GAS STORAGE DEVICES - HYDROGEN ABSORBED IN REVERSIBLE METAL HYDRIDE |
11/30229997 DC : 0 | BS EN 14427 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
I.S. EN ISO 12209:2013 | GAS CYLINDERS - OUTLET CONNECTIONS FOR GAS CYLINDER VALVES FOR COMPRESSED BREATHABLE AIR (ISO 12209:2013) |
BS ISO 14456 : 2015 | GAS CYLINDERS - GAS PROPERTIES AND ASSOCIATED CLASSIFICATION (FTSC) CODES |
ISO 10461:2005 | Gas cylinders Seamless aluminium-alloy gas cylinders Periodic inspection and testing |
UNE-EN 14678-3:2013 | LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 3: Refuelling installations at commercial and industrial premises |
16/30339669 DC : 0 | BS ISO 21010 - CRYOGENIC VESSELS - GAS/MATERIALS COMPATIBILITY |
BS ISO 11515 : 2013 | GAS CYLINDERS - REFILLABLE COMPOSITE REINFORCED TUBES OF WATER CAPACITY BETWEEN 450 L AND 3000 L - DESIGN, CONSTRUCTION AND TESTING |
05/30131633 DC : DRAFT APR 2005 | ISO 22435 - GAS CYLINDERS - CYLINDER VALVES WITH INTEGRATED PRESSURE REGULATOR - SPECIFICATION AND TYPE TESTING |
UNI EN ISO 13293 : 2013 | RECREATIONAL DIVING SERVICES - REQUIREMENTS FOR GAS BLENDER TRAINING PROGRAMMES |
ISO 3500:2005 | Gas cylinders Seamless steel CO2 cylinders for fixed fire-fighting installations on ships |
ISO 15995:2006 | Gas cylinders Specifications and testing of LPG cylinder valves Manually operated |
I.S. EN ISO 13293:2012 | RECREATIONAL DIVING SERVICES - REQUIREMENTS FOR GAS BLENDER TRAINING PROGRAMMES (ISO 13293:2012) |
I.S. EN ISO 14456:2016 | GAS CYLINDERS - GAS PROPERTIES AND ASSOCIATED CLASSIFICATION (FTSC) CODES (ISO 14456:2015) |
ISO 11622:2005 | Gas cylinders Conditions for filling gas cylinders |
ISO 12619-15:2017 | Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 15: Filter |
DIN EN 13175:2015-02 | LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS |
ISO 12619-14:2017 | Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 14: Flexible fuel line |
ISO 15996:2017 | Gas cylinders — Residual pressure valves — Specification and type testing of cylinder valves incorporating residual pressure devices |
DIN EN ISO 24431:2015-08 (Draft) | GAS CYLINDERS - SEAMLESS, WELDED AND COMPOSITE CYLINDERS FOR COMPRESSED AND LIQUEFIED GASES (EXCLUDING ACETYLENE) - INSPECTION AT TIME OF FILLING (ISO 24431:2016) |
EN ISO 15996:2017 | Gas cylinders - Residual pressure valves - Specification and type testing of cylinder valves incorporating residual pressure devices (ISO 15996:2017) |
DIN EN 14678-1:2013-06 | LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers |
DIN EN ISO 11114-3:2011-04 | Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere (ISO 11114-3:2010) |
DIN EN ISO 13341:2015-11 | GAS CYLINDERS - FITTING OF VALVES TO GAS CYLINDERS (ISO 13341:2010 + AMD 1:2015) |
UNE-EN ISO 11114-3:2011 | Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere (ISO 11114-3:2010) |
BS ISO 22734-1:2008 | Hydrogen generators using water electrolysis process Industrial and commercial applications |
UNE-EN ISO 11623:2016 | Gas cylinders - Composite construction - Periodic inspection and testing (ISO 11623:2015, Corrected version 2017-02) |
ISO 11114-3:2010 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere |
ISO 22734-1:2008 | Hydrogen generators using water electrolysis process Part 1: Industrial and commercial applications |
BS EN 14678-1:2013 | LPG equipment and accessories. Construction and performance of LPG equipment for automotive filling stations Dispensers |
BS EN 14893:2014 | LPG equipment and accessories. Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres |
BS EN ISO 14113:2013 | Gas welding equipment. Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) |
ISO 11623:2015 | Gas cylinders — Composite construction — Periodic inspection and testing |
DIN EN 15202:2012-09 | LPG EQUIPMENT AND ACCESSORIES - ESSENTIAL OPERATIONAL DIMENSIONS FOR LPG CYLINDER VALVE OUTLET AND ASSOCIATED EQUIPMENT CONNECTIONS |
EN 12252:2014 | LPG equipment and accessories - Equipping of LPG road tankers |
EN 13760:2003 | Automotive LPG filling system for light and heavy duty vehicles - Nozzle, test requirements and dimensions |
UNE-ISO 22734-1:2012 | Hydrogen generators using water electrolysis process. Part 1: Industrial and commercial applications |
DIN EN 14876:2007-04 | Transportable gas cylinders - Periodic inspection and testing of welded steel pressure drums |
DIN EN 13807:2017-05 | TRANSPORTABLE GAS CYLINDERS - BATTERY VEHICLES AND MULTIPLE-ELEMENT GAS CONTAINERS (MEGCS) - DESIGN, MANUFACTURE, IDENTIFICATION AND TESTING |
EN 16119:2013 | LPG equipment and accessories - Sealing caps and plugs for LPG cylinder and pressure vessel valves - Specification and testing |
EN ISO 12209 : 2013 AMD 1/COR 17 | GAS CYLINDERS - OUTLET CONNECTIONS FOR GAS CYLINDER VALVES FOR COMPRESSED BREATHABLE AIR (ISO 12209:2013/AMD 1:2016, CORRECTED VERSION 2017-03) |
DIN EN 14513:2005-06 | Transportable gas cylinders - Bursting disc pressure relief devices (excluding acetylene gas cylinders) |
I.S. EN ISO 22435:2007 | GAS CYLINDERS - CYLINDER VALVES WITH INTEGRATED PRESSURE REGULATORS - SPECIFICATION AND TYPE TESTING (ISO 22435:2007) |
ONORM EN ISO 22435 : 2013 | GAS CYLINDERS - CYLINDER VALVES WITH INTEGRATED PRESSURE REGULATORS - SPECIFICATION AND TYPE TESTING (ISO 22435:2007+AMD 1:2012) |
AS 2337.3:2020 | Gas cylinder test stations Transportable gas cylinders - Periodic inspection and testing of composite cylinders (ISO 11623:2015, MOD) |
ISO 9539:2010 | Gas welding equipment Materials for equipment used in gas welding, cutting and allied processes |
ISO 11114-1:2012 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 1: Metallic materials |
ISO 15001:2010 | Anaesthetic and respiratory equipment Compatibility with oxygen |
SA TS 19883:2020 | Safety of pressure swing adsorption systems for hydrogen separation and purification (ISO/TS 19883:2017, MOD) |
ISO 11114-3:2010 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere |
ISO 10297:2014 | Gas cylinders — Cylinder valves — Specification and type testing |
ISO 10156:2017 | Gas cylinders — Gases and gas mixtures — Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets |
ISO 1817:2015 | Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.