• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ISO 1127:1992

Current
Current

The latest, up-to-date edition.

Stainless steel tubes Dimensions, tolerances and conventional masses per unit length
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English, French

Published date

17-12-1992

The outside diameters and thicknesses of the tubes have been selected from ISO 4200. If thicknesses greater than 14,2 mm are needed, they should be choosen from ISO 4200. Specifies the diameters, tolerances and other parameters of tubes. It tabulates conventional masses for austenitic (table 1) and for ferritic and martensitic (table 2) stainless steel tubes.

DocumentType
Standard
Pages
8
PublisherName
International Organization for Standardization
Status
Current
Supersedes

IEC 60998-2-5:1996+AMD1:1999 CSV Connecting devices for low-voltage circuits for household and similar purposes - Part 2-5: Particular requirements for connecting boxes (junction and/or tapping) for terminals or connecting devices
DIN 4935-1 E : 2002 STAINLESS STEEL WIRE WRAPPED WELL SCREENS - PART 1: SIZES DN 40 TO DN 100 THREADED SCREENS WITH CONTINUOUS SLOT
BS ISO 8434-1 : 94 AMD 9583 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - 24 DEGREE COMPRESSION FITTINGS
BS ISO 8434-2:2007 Metallic tube connections for fluid power and general use 37° flared connectors
DD ENV 1090-6:2001 Execution of steel structures Supplementary rules for stainless steel
ISO 9330-6:1997 Welded steel tubes for pressure purposes — Technical delivery conditions — Part 6: Longitudinally welded austenitic stainless steel tubes
S.R. CWA 16519:2012 DESIGN AND CONSTRUCTION CODE FOR MECHANICAL EQUIPMENTS OF INNOVATIVE NUCLEAR INSTALLATIONS
DIN EN ISO 8434-1 E : 2008 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
BS EN 14034-1 : 2004 DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 1: DETERMINATION OF THE MAXIMUM EXPLOSION PRESSURE P[MAX] OF DUST CLOUDS
BS EN ISO 8434-4:2000 Metallic tube connections for fluid power and general use 24° cone connectors with O-ring weld-on nipples
EN 13312-4:2001 Biotechnology - Performance criteria for piping and instrumentation - Part 4: Tubes and pipes
EN 10253-4:2008/AC:2009 BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
EN 1267:2012 Industrial valves - Test of flow resistance using water as test fluid
DIN EN ISO 15748-2:2002-09 SHIPS AND MARINE TECHNOLOGY - POTABLE WATER SUPPLY ON SHIPS AND MARINE STRUCTURES - PART 2: METHOD OF CALCULATION
DIN 4935-3:2002-06 STAINLESS STEEL WIRE WRAPPED WELL SCREENS - PART 3: SIZES DN 500 TO DN 1000 FLANGED SCREENS WITH CONTINUOUS SLOT
EN 10079:2007 Definition of steel products
EN 10297-2:2005/AC:2007 SEAMLESS CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL
EN 10253-3:2008 Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
EN 10296-2:2005/AC:2007 WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL
DIN EN 1090-2:2011-10 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
UNI EN 1949 : 2013 SPECIFICATION FOR THE INSTALLATION OF LPG SYSTEMS FOR HABITATION PURPOSES IN LEISURE ACCOMMODATION VEHICLES AND ACCOMMODATION PURPOSES IN OTHER VEHICLES
EN 10357:2013 Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry
DIN EN ISO 8434-1:2008-02 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
EN 10220:2002 Seamless and welded steel tubes - Dimensions and masses per unit length
12/30258099 DC BS EN 267. Forced draught burners for liquid fuels
DIN 4935-3 E : 2002 STAINLESS STEEL WIRE WRAPPED WELL SCREENS - PART 3: SIZES DN 500 TO DN 1000 FLANGED SCREENS WITH CONTINUOUS SLOT
EN 10217-7:2014 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
16/30290140 DC : 0 BS EN ISO 8434-1 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREES CONE CONNECTORS
05/30135789 DC : DRAFT JUL 2005 EN ISO 8434-1 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREES CONE CONNECTORS
UNI EN 10217-7 : 2014 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES
PREN 10253-4 : DRAFT 2017 BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC & AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
PREN 1090-2 : DRAFT 2015 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
09/30201899 DC : 0 BS EN 1949 - SPECIFICATION FOR THE INSTALLATION OF LPG SYSTEMS FOR HABITATION PURPOSES IN LEISURE ACCOMMODATION VEHICLES AND ACCOMMODATION PURPOSES IN OTHER VEHICLES
DIN 18799-3:1999-08 LADDERS FOR CONSTRUCTION WORKS - PART 3: LADDERS FOR CHIMNEYS - SAFETY REQUIREMENTS AND TESTS
UNE-EN 1090-2:2011 Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
BS EN 10253-4:2008 Butt-welding pipe fittings Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
BS EN 1090-2 : 2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
BS ISO 15500-16 : 2012 ROAD VEHICLES - COMPRESSED NATURAL GAS (CNG) FUEL SYSTEM COMPONENTS - PART 16: RIGID FUEL LINE IN STAINLESS STEEL
ISO 1609:1986 Vacuum technology Flange dimensions
ISO 2604-5:1978 Steel products for pressure purposes Quality requirements Part 5: Longitudinally welded austenitic stainless steel tubes
UNI ISO 8434-2 : 2012 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 2: 37 DEGREE FLARED CONNECTORS
DIN EN 1090-2:2015-07 (Draft) EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
UNI EN 1090-2 : 2011 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
BS EN ISO 8434-1:2007 Metallic tube connections for fluid power and general use 24 degree cone connectors
DIN EN 10216-5:2014-03 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
EN 267:2009+A1:2011 Automatic forced draught burners for liquid fuels
DIN EN 10297-2 E : 2006 SEAMLESS CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL
DIN EN 1124-3:2009-02 PIPES AND FITTINGS OF LONGITUDINALLY WELDED STAINLESS STEEL PIPES WITH SPIGOT AND SOCKET FOR WASTE WATER SYSTEMS - PART 3: SYSTEM X - DIMENSIONS
DIN EN 267:2012-03 (Draft) AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS
DIN EN 267:2011-11 Automatic forced draught burners for liquid fuels
DIN EN 10297-2:2006-02 Seamless steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
DIN EN 10296-2 : 2007-06 WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL
BS EN 10220:2002 Seamless and welded steel tubes. Dimensions and masses per unit length
BS EN ISO 15748-1:2002 Ships and marine technology. Potable water supply on ships and marine structures Planning and design
I.S. EN 1949:2011 SPECIFICATION FOR THE INSTALLATION OF LPG SYSTEMS FOR HABITATION PURPOSES IN LEISURE ACCOMMODATION VEHICLES AND ACCOMMODATION PURPOSES IN OTHER VEHICLES (INCLUDING IRISH NATIONAL ANNEX)
I.S. EN 1267:2012 INDUSTRIAL VALVES - TEST OF FLOW RESISTANCE USING WATER AS TEST FLUID
I.S. EN 14034-2:2006 DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 2: DETERMINATION OF THE MAXIMUM RATE OF EXPLOSION PRESSURE RISE (DP/DT)[MAX] OF DUST CLOUDS
I.S. EN 14034-4:2004 DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 4: DETERMINATION OF THE LIMITING OXYGEN CONCENTRATION LOC OF DUST CLOUDS
DIN EN 14034-3:2011-04 Determination of explosion characteristics of dust clouds - Part 3: Determination of the lower explosion limit LEL of dust clouds (includes Amendment A1:2011)
DIN EN 14034-1:2011-04 Determination of explosion characteristics of dust clouds - Part 1: Determination of the maximum explosion pressure p<(Index)max> of dust clouds (includes Amendment A1:2011)
I.S. EN 10296-2:2006 WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL
I.S. EN 10216-5:2013 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES
I.S. EN 10217-7:2014 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES
DIN EN 14034-2:2011-04 Determination of explosion characteristics of dust clouds - Part 2: Determination of the maximum rate of explosion pressure rise (dp/dt)<(Index)max> of dust clouds (includes Amendment A1:2011)
DIN EN 14034-4:2011-04 Determination of explosion characteristics of dust clouds - Part 4: Determination of the limiting oxygen concentration LOC of dust clouds (includes Amendment A1:2011)
I.S. EN 14034-3:2006 DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 3: DETERMINATION OF THE LOWER EXPLOSION LIMIT LEL OF DUST CLOUDS
I.S. EN 14034-1:2004 DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 1: DETERMINATION OF THE MAXIMUM EXPLOSION PRESSURE P[MAX] OF DUST CLOUDS
I.S. EN 1124-3:2008 PIPES AND FITTINGS OF LONGITUDINALLY WELDED STAINLESS STEEL PIPES WITH SPIGOT AND SOCKET FOR WASTE WATER SYSTEMS - PART 3: SYSTEM X - DIMENSIONS
I.S. EN 10079:2007 DEFINITION OF STEEL PRODUCTS
UNI EN 14034-1 : 2011 DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 1: DETERMINATION OF THE MAXIMUM EXPLOSION PRESSURE PMAX OF DUST CLOUDS
KTA 3407 : 2014 PIPE PENETRATIONS THROUGH THE REACTOR CONTAINMENT VESSEL
VDI 2083 Blatt 13.3:2010-10 Cleanroom technology - Quality, production, and distribution of ultrapure water - Pharmacy and other life-science applications
BS 3600:1976 Specification for dimensions and masses per unit length of welded and seamless steel pipes and tubes for pressure purposes
BS 6362:1990 Specification for stainless steel tubes suitable for screwing in accordance with BS 21 \'Pipe threads for tubes and fittings where pressure-tight joints are made on the threads\'
DIN 6656:1997-12 PNEUMATIC TUBE SYSTEMS - CONVEYOR TUBES, CONVEYOR TUBE BENDS AND SLEEVES FOR PNEUMATIC TUBES LINES IN STEEL AND STAINLESS STEEL
I.S. EN ISO 8434-1:2007 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
BS EN 10253-3:2008 Butt-welding pipe fittings Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
DIN EN 10357 E : 2014 AUSTENITIC, AUSTENITIC-FERRITIC AND FERRITIC LONGITUDINALLY WELDED STAINLESS STEEL TUBES FOR THE FOOD AND CHEMICAL INDUSTRY
ISO 12614-10:2014 Road vehicles Liquefied natural gas (LNG) fuel system components Part 10: Rigid fuel line in stainless steel
DIN EN 10253-4:2008-06 BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
UNI EN 10216-5 : 2014 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES
UNI EN 806-4 : 2010 SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 4: INSTALLATION
ONORM EN 10217-7 : 2014 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES
BS EN 806-4:2010 Specifications for installations inside buildings conveying water for human consumption Installation
BS ISO 14661:2000 Thermal turbines for industrial applications (steam turbines, gas expansion turbines). General requirements
BS EN 10357:2013 Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry
PREN 1949 : DRAFT 2009 SPECIFICATION FOR THE INSTALLATION OF LPG SYSTEMS FOR HABITATION PURPOSES IN LEISURE ACCOMMODATION VEHICLES AND ACCOMMODATION PURPOSES IN OTHER VEHICLES
UNI EN 10253-4 : 2009 BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
I.S. EN 10357:2013 AUSTENITIC, AUSTENITIC-FERRITIC AND FERRITIC LONGITUDINALLY WELDED STAINLESS STEEL TUBES FOR THE FOOD AND CHEMICAL INDUSTRY
ISO 9329-4:1997 Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 4: Austenitic stainless steels
UNI EN 1092-1 : 2013 FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
KTA 3211.1 : 2015 PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 1: MATERIALS
DIN EN 1092-1:2016-05 (Draft) FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
UNI EN ISO 8434-1 : 2007 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
EN 1090-2:2008+A1:2011 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
I.S. EN 1092-1:2007 FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES,FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
DIN EN 1949:2013-05 Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and accommodation purposes in other vehicles (includes Amendment A1:2013)
BS EN 10217-7:2014 Welded steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes
DIN EN 10296-2 E : 2006 WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL
BS EN ISO 15748-2:2002 Ships and marine technology. Potable water supply on ships and marine structures Method of calculation
UNE-EN 1267:2012 Industrial valves - Test of flow resistance using water as test fluid
UNE-EN 1949:2011 Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and accommodation purposes in other vehicles
ISO 8434-4:1995 Metallic tube connections for fluid power and general use Part 4: 24 degree cone connectors with O-ring weld-on nipples
ISO 15748-2:2002 Ships and marine technology — Potable water supply on ships and marine structures — Part 2: Method of calculation
UNI EN 267 : 2011 AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS
ONORM EN 1090-2 : 2012 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
DIN EN 14198:2017-03 RAILWAY APPLICATIONS - BRAKING - REQUIREMENTS FOR THE BRAKE SYSTEM OF TRAINS HAULED BY LOCOMOTIVES
EN ISO 15748-1 : 2002 SHIPS AND MARINE TECHNOLOGY - POTABLE WATER SUPPLY ON SHIPS AND MARINE STRUCTURES - PLANNING AND DESIGN
UNI EN 1267 : 2012 INDUSTRIAL VALVES - TEST OF FLOW RESISTANCE USING WATER AS TEST FLUID
UNI EN 14034-3 : 2011 DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 3: DETERMINATION OF THE LOWER EXPLOSION LIMIT LEL OF DUST CLOUDS
ONORM EN 1949 : 2013 SPECIFICATION FOR THE INSTALLATION OF LPG SYSTEMS FOR HABITATION PURPOSES IN LEISURE ACCOMMODATION VEHICLES AND ACCOMMODATION PURPOSES OTHER VEHICLES
UNI EN 14034-2 : 2011 DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 2: DETERMINATION OF THE MAXIMUM RATE OF EXPLOSION PRESSURE RISE (DP/DT)[MAX] OF DUST CLOUDS
UNI EN 1124-3 : 2008 PIPES AND FITTINGS OF LONGITUDINALLY WELDED STAINLESS STEEL PIPES WITH SPIGOT AND SOCKET FOR WASTE WATER SYSTEMS - PART 3: SYSTEM X - DIMENSIONS
UNI EN 14034-4 : 2011 DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 4: DETERMINATION OF THE LIMITING OXYGEN CONCENTRATION LOC OF DUST CLOUDS
I.S. EN ISO 8434-4:2000 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 4: 24 DEGREE CONE CONNECTORS WITH O-RING WELD-ON NIPPLES
EN 10216-5:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
16/30336440 DC : DRAFT MAR 2016 BS EN 1092-1 - FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
15/30320416 DC : 0 BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
ISO 15500-16:2012 Road vehicles Compressed natural gas (CNG) fuel system components Part 16: Rigid fuel line in stainless steel
BS ISO 12619-13:2017 Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components Rigid fuel line in stainless steel
UNI EN 10253-3 : 2009 BUTT-WELDING PIPE FITTINGS - PART 3: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITHOUT SPECIFIC INSPECTION REQUIREMENTS
DIN EN 10253-3:2009-02 BUTT-WELDING PIPE FITTINGS - PART 3: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITHOUT SPECIFIC INSPECTION REQUIREMENTS
DIN EN 806-4:2010-06 Specifications for installations inside buildings conveying water for human consumption - Part 4: Installation
ISO 14661:2000 Thermal turbines for industrial applications (steam turbines, gas expansion turbines) General requirements
DIN 4935-2 E : 2002 STAINLESS STEEL WIRE WRAPPED WELL SCREENS - PART 2: SIZES DN 100 TO DN 500 THREADED SCREENS WITH CONTINUOUS SLOT
BS ISO 8434-4 : 1995 AMD 11038 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - 24 DEGREE CONE CONNECTORS WITH O-RING WELD-ON NIPPLES
ISO 12619-13:2017 Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 13: Rigid fuel line in stainless steel
DIN EN 14198:2015-01 (Draft) RAILWAY APPLICATIONS - BRAKING - REQUIREMENTS FOR THE BRAKE SYSTEM OF TRAINS HAULED BY LOCOMOTIVES
EN 1092-1:2018 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges
DIN EN ISO 8434-1:2016-10 (Draft) METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
DIN EN 1267:2012-04 Industrial valves - Test of flow resistance using water as test fluid
EN ISO 8434-1:2007/AC:2009 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
I.S. EN 806-4:2010 SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 4: INSTALLATION
ISO 8434-1:2007 Metallic tube connections for fluid power and general use Part 1: 24 degree cone connectors
ISO 8434-2:2007 Metallic tube connections for fluid power and general use — Part 2: 37 degree flared connectors
BS EN 1949:2011+A1:2013 Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and accommodation purposes in other vehicles
I.S. EN 267:2009 AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS
BS EN 267 : 2009 AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS
DIN EN 10217-7:2015-01 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
BS EN 14034-4 : 2004 DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 4: DETERMINATION OF THE LIMITING OXYGEN CONCENTRATION LOC OF DUST CLOUDS
BS EN 10216-5:2013 Seamless steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes
BS EN 1124-3:2008 Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems System X. Dimensions
BS EN 13312-4:2001 Biotechnology. Performance criteria for piping and instrumentation Tubes and pipes
BS EN 10296-2:2005 Welded circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions Stainless steel
BS EN 10246-2:2000 Non-destructive testing of steel tubes Automatic eddy current testing of seamless and welded (except submerged arc welded) austenitic and austenitic-ferritic steel tubes for verification of hydraulic leak-tightness
BS EN 10079:2007 Definition of steel products
ISO 15748-1:2002 Ships and marine technology — Potable water supply on ships and marine structures — Part 1: Planning and design
UNE-EN 10216-5:2014 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
BS EN 10297-2:2005 Seamless circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions Stainless steel
DIN EN ISO 15748-1:2002-09 SHIPS AND MARINE TECHNOLOGY - POTABLE WATER SUPPLY ON SHIPS AND MARINE STRUCTURES - PART 1: PLANNING AND DESIGN
EN 14034-2:2006+A1:2011 Determination of explosion characteristics of dust clouds - Part 2: Determination of the maximum rate of explosion pressure rise (dp/dt)max of dust clouds
EN ISO 15748-2 : 2002 SHIPS AND MARINE TECHNOLOGY - POTABLE WATER SUPPLY ON SHIPS AND MARINE STRUCTURES - PART 2: METHOD OF CALCULATION
EN 806-4:2010 Specifications for installations inside buildings conveying water for human consumption - Part 4: Installation
EN 14034-3:2006+A1:2011 Determination of explosion characteristics of dust clouds - Part 3: Determination of the lower explosion limit LEL of dust clouds
EN 14034-4:2004+A1:2011 Determination of explosion characteristics of dust clouds - Part 4: Determination of the limiting oxygen concentration LOC of dust clouds
EN 14034-1:2004+A1:2011 Determination of explosion characteristics of dust clouds - Part 1: Determination of the maximum explosion pressure pmax of dust clouds
EN ISO 8434-4 : 2000 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 4: 24 DEGREE CONE CONNECTORS WITH O-RING WELD-ON NIPPLES
I.S. EN 10246-2:2000 NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 2: AUTOMATIC EDDY CURRENT TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) AUSTENITIC AND AUSTENITIC-FERRITIC STEEL TUBES FOR VERIFICATION OF HYDRAULIC LEAK-TIGHTNESS
11/30197571 DC : 0 BS ISO 25832-1 - IMPLANTS FOR SURGERY - SEAMLESS TUBES FOR SURGICAL IMPLANTS - PART 1: MATERIALS BASED ON IRON
10/30197495 DC : 0 BS ISO 15500-16 - ROAD VEHICLES - COMPRESSED NATURAL GAS (CNG) FUEL SYSTEM COMPONENTS - PART 16: RIGID FUEL LINE
BS ISO 12614-10:2014 Road vehicles. Liquefied natural gas (LNG) fuel system components Rigid fuel line in stainless steel
DIN 28025:2003-02 NOZZLES OF STAINLESS STEEL - PN 10 TO PN 40
09/30202711 DC : 0 BS EN 1267 - INDUSTRIAL VALVES - TEST OF FLOW RESISTANCE USING WATER AS TEST FLUID
ONORM EN ISO 8434-1 : 2009 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
BS 6362:1984 Specification for stainless steel tubes suitable for screwing in accordance with BS 21 \'Pipe threads for tubes and fittings where pressure-tight joints are made on the threads\'
I.S. EN 1090-2:2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
UNI EN 10357 : 2014 AUSTENITIC, AUSTENITIC-FERRITIC AND FERRITIC LONGITUDINALLY WELDED STAINLESS STEEL TUBES FOR THE FOOD AND CHEMICAL INDUSTRY
I.S. EN 10253-4:2008 BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
I.S. EN 10253-3:2008 BUTT-WELDING PIPE FITTINGS - PART 3: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITHOUT SPECIFIC INSPECTION REQUIREMENTS
BS EN 1949 : 2011 SPECIFICATION FOR THE INSTALLATION OF LPG SYSTEMS FOR HABITATION PURPOSES IN LEISURE ACCOMMODATION VEHICLES AND ACCOMMODATION PURPOSES IN OTHER VEHICLES
BS EN 14034-3 : 2006 DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 3: DETERMINATION OF THE LOWER EXPLOSION LIMIT LEL OF DUST CLOUDS
BS EN 14034-2 : 2006 DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 2: DETERMINATION OF THE MAXIMUM RATE OF EXPLOSION PRESSURE RISE (DP/DT)[MAX] OF DUST CLOUDS
BS EN 1267:2012 Industrial valves. Test of flow resistance using water as test fluid
EN 1124-3:2008 Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 3: System X - Dimensions
DIN EN 10079:2007-06 Definition of steel products
DIN EN 10296-2:2006-02 Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
EN 10246-2:2000 Non-destructive testing of steel tubes - Part 2: Automatic eddy current testing of seamless and welded (except submerged arc-welded) austenitic and austenitic-ferritic steel tubes for verification of hydraulic leak-tightness
DIN 4935-1:2002-06 STAINLESS STEEL WIRE WRAPPED WELL SCREENS - PART 1: SIZES DN 40 TO DN 100 THREADED SCREENS WITH CONTINUOUS SLOT
EN 1949:2011+A1:2013 Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and accommodation purposes in other vehicles
DIN EN 10357:2014-03 Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry
DIN 4935-2:2002-06 STAINLESS STEEL WIRE WRAPPED WELL SCREENS - PART 2: SIZES DN 100 TO DN 500 THREADED SCREENS WITH CONTINUOUS SLOT
ASME B32.100 : 2016 PREFERRED METRIC SIZES FOR FLAT, ROUND, SQUARE, RECTANGULAR AND HEXAGONAL METAL PRODUCTS

ISO 4200:1991 Plain end steel tubes, welded and seamless — General tables of dimensions and masses per unit length
ISO 5252:1991 Steel tubes — Tolerance systems

View more information
£58.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.