ISO 12215-6:2008
Current
The latest, up-to-date edition.
Small craft — Hull construction and scantlings — Part 6: Structural arrangements and details
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English, French
20-03-2008
ISO 12215-6:2008 concerns structural details and structural components not explicitly included in ISO 12215-5, ISO 12215-7, ISO 12215-8 and ISO 12215-9. It applies to monohull and multihull small craft constructed from fibre reinforced plastics (FRP), aluminium or steel alloys, wood or other suitable boat building material, with a hull length, in accordance with ISO 8666, of up to 24 m.
ISO 12215-6:2008 fulfils two functions. Firstly, it supports ISO 12215-5 by providing further explanations and calculation procedures and formulae. Secondly, it gives a number of examples of arrangements and structural details which illustrate principles of good practice. These principles provide a standard against which alternative arrangements and structural details can be benchmarked, using the equivalence criteria specified in ISO 12215-6:2008.
DevelopmentNote |
Supersedes ISO/DIS 12215-6. (03/2008)
|
DocumentType |
Standard
|
Pages |
52
|
PublisherName |
International Organization for Standardization
|
Status |
Current
|
Standards | Relationship |
UNE-EN ISO 12215-6:2008 | Identical |
SANS 12215-6 : 1ED 2009(R2015) | Identical |
NEN EN ISO 12215-6 : 2008 | Identical |
EN ISO 12215-6:2018 | Identical |
NF EN ISO 12215-6:2018 | Identical |
SAC GB/T 19314.6 : 2019 | Identical |
ÖNORM EN ISO 12215-6: 2019 04 15 | Identical |
PN-EN ISO 12215-6:2018-12/Ap1:2022-09 | Identical |
UNI EN ISO 12215-6 : 2008 | Identical |
SN EN ISO 12215-6 : 2008 | Identical |
DIN EN ISO 12215-6:2008-07 | Identical |
SN EN ISO 12215-6:2019 | Identical |
BS EN ISO 12215-6:2008 | Identical |
EN ISO 12215-6:2008 | Identical |
NS EN ISO 12215-6 : 1ED 2008 | Identical |
I.S. EN ISO 12215-6:2008 | Identical |
UNE-EN ISO 12215-6:2019 | Identical |
JIS F 1034-6:2020 | Identical |
NF EN ISO 12215-6 : 2008 | Identical |
PN EN ISO 12215-6 : 2009 | Identical |
NBN EN ISO 12215-6 : 2008 | Identical |
DIN EN ISO 12215-6:2019-05 | Identical |
ONORM EN ISO 12215-6 : 2008 | Identical |
SANS 12215-6:2009(R2021) | Identical |
NS-EN ISO 12215-6:2018 | Identical |
PN-EN ISO 12215-6:2018-12 | Identical |
DIN EN ISO 12215-6:2020-05 | Identical |
UNI EN ISO 12215-5 : 2014 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION |
I.S. EN ISO 6185-3:2014 | INFLATABLE BOATS - PART 3: BOATS WITH A HULL LENGTH LESS THAN 8 M WITH A MOTOR RATING OF 15 KW AND GREATER (ISO 6185-3:2014) |
ONORM EN ISO 6185-4 : 2015 | INFLATABLE BOATS - PART 4: BOATS WITH A HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER (ISO 6185-4:2011, CORRECTED VERSION 2014-08-01) |
UNE-EN ISO 6185-3:2015 | Inflatable boats - Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater (ISO 6185-3:2014) |
BS EN ISO 21487 : 2012 | SMALL CRAFT - PERMANENTLY INSTALLED PETROL AND DIESEL FUEL TANKS |
UNE-EN ISO 12215-9:2013 | Small craft - Hull construction and scantlings - Part 9: Sailing craft appendages (ISO 12215-9:2012) |
UNI EN ISO 6185-4 : 2011 | INFLATABLE BOATS - PART 4: BOATS WITH A HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER |
DIN EN ISO 6185-3:2014-12 | INFLATABLE BOATS - PART 3: BOATS WITH A HULL LENGTH LESS THAN 8 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER (ISO 6185-3:2014) |
NF EN ISO 6185-4 : 2011 | INFLATABLE BOATS - PART 4: BOATS WITH AN HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER |
DIN EN ISO 21487 E : 2016 | SMALL CRAFT - PERMANENTLY INSTALLED PETROL AND DIESEL FUEL TANKS (ISO 21487:2012 + AMD 1:2014 + AMD 2:2015) |
I.S. EN ISO 6185-4:2011 | INFLATABLE BOATS - PART 4: BOATS WITH A HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER (ISO 6185-4:2011, CORRECTED VERSION 2014-08-01) |
PREN ISO 6185-3 : DRAFT 2013 | INFLATABLE BOATS - PART 3: BOATS WITH A MAXIMUM MOTOR POWER RATING OF 15 KW AND GREATER (ISO/DIS 6185-3:2013) |
I.S. EN ISO 12215-9:2012 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 9: SAILING CRAFT APPENDAGES (ISO 12215-9:2012) |
UNI EN ISO 12215-9 : 2012 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 9: SAILING CRAFT APPENDAGES |
BS EN ISO 6185-4:2011 | Inflatable boats Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater |
EN ISO 21487:2012/A2:2015 | SMALL CRAFT - PERMANENTLY INSTALLED PETROL AND DIESEL FUEL TANKS (ISO 21487:2012/AMD 2:2015) |
DIN EN ISO 12215-5:2014-10 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION (ISO 12215-5:2008 + AMD 1:2014) |
BS EN ISO 12215-5 : 2008 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION |
UNE-EN ISO 12215-5:2008 | Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2008) |
DIN EN ISO 21487:2016-05 | SMALL CRAFT - PERMANENTLY INSTALLED PETROL AND DIESEL FUEL TANKS (ISO 21487:2012 + AMD 1:2014 + AMD 2:2015) |
BS EN ISO 12215-9:2012 | Small craft. Hull construction and scantlings Sailing craft appendages |
DIN EN ISO 12215-9:2013-01 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 9: SAILING CRAFT APPENDAGES (ISO 12215-9:2012) |
ISO 12215-5:2008 | Small craft Hull construction and scantlings Part 5: Design pressures for monohulls, design stresses, scantlings determination |
BS EN ISO 6185-3:2014 | Inflatable boats Boats with a hull length less than 8 m with a motor rating of 15 kW and greater |
ONORM EN ISO 12215-5 : 2014 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION (ISO 12215-5:2008 + AMD 1:2014) |
I.S. EN ISO 12215-5:2008 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION (ISO 12215-5:2008) |
EN ISO 12215-5:2008/A1:2014 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION (ISO 12215-5:2008/AMD 1:2014) |
UNI EN ISO 6185-3 : 2014 | INFLATABLE BOATS - PART 3: BOATS WITH A HULL LENGTH LESS THAN 8 M WITH A MOTOR RATING OF 15 KW AND GREATER |
ISO 21487:2012 | Small craft — Permanently installed petrol and diesel fuel tanks |
UNE-EN ISO 6185-4:2012 | Inflatable boats - Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater (ISO 6185-4:2011, Corrected version 2014-08-01) |
13/30229200 DC : 0 | BS EN ISO 6185-3 - INFLATABLE BOATS - PART 3: BOATS WITH A MAXIMUM MOTOR POWER RATING OF 15 KW AND GREATER |
17/30366966 DC : 0 | BS EN ISO 12215-7 - SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 7: SCANTLINGS DETERMINATION OF MULTIHULLS |
DIN EN ISO 6185-4:2011-10 | INFLATABLE BOATS - PART 4: BOATS WITH A HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER |
ISO 6185-3:2014 | Inflatable boats — Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater |
ISO 12215-9:2012 | Small craft Hull construction and scantlings Part 9: Sailing craft appendages |
EN ISO 6185-3:2014 | Inflatable boats - Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater (ISO 6185-3:2014) |
EN ISO 6185-4:2011 | Inflatable boats - Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater (ISO 6185-4:2011, Corrected version 2014-08-01) |
EN ISO 12215-9:2012 | Small craft - Hull construction and scantlings - Part 9: Sailing craft appendages (ISO 12215-9:2012) |
UNE-EN ISO 21487:2013 | Small craft - Permanently installed petrol and diesel fuel tanks (ISO 21487:2012) |
ISO 6185-4:2011 | Inflatable boats Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater |
I.S. EN ISO 21487:2012 | SMALL CRAFT - PERMANENTLY INSTALLED PETROL AND DIESEL FUEL TANKS (ISO 21487:2012) |
2003/44/EC : 2003 COR 1 2006 | DIRECTIVE 2003/44/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 16 JUNE 2003 AMENDING DIRECTIVE 94/25/EC ON THE APPROXIMATION OF THE LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO RECREATIONAL CRAFT |
ISO 12215-5:2008 | Small craft Hull construction and scantlings Part 5: Design pressures for monohulls, design stresses, scantlings determination |
ISO 2553:2013 | Welding and allied processes Symbolic representation on drawings Welded joints |
ISO 9692-4:2003 | Welding and allied processes — Recommendations for joint preparation — Part 4: Clad steels |
ISO 6520-1:2007 | Welding and allied processes Classification of geometric imperfections in metallic materials Part 1: Fusion welding |
ISO 13920:1996 | Welding — General tolerances for welded constructions — Dimensions for lengths and angles — Shape and position |
ISO 10042:2005 | Welding Arc-welded joints in aluminium and its alloys Quality levels for imperfections |
ISO 12215-9:2012 | Small craft Hull construction and scantlings Part 9: Sailing craft appendages |
ISO 12215-8:2009 | Small craft — Hull construction and scantlings — Part 8: Rudders |
1994/25/EC : 1994 | DIRECTIVE 94/25/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 16 JUNE 1994 ON THE APPROXIMATION OF THE LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO RECREATIONAL CRAFT |
ISO 8666:2016 | Small craft Principal data |
ISO 5817:2014 | Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections |
ISO 9692-1:2013 | Welding and allied processes — Types of joint preparation — Part 1: Manual metal arc welding, gas-shielded metal arc welding, gas welding, TIG welding and beam welding of steels |
ISO 12215-3:2002 | Small craft — Hull construction and scantlings — Part 3: Materials: Steel, aluminium alloys, wood, other materials |
ISO 9692-3:2016 | Welding and allied processes Types of joint preparation Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys |
ISO 6520-2:2013 | Welding and allied processes — Classification of geometric imperfections in metallic materials — Part 2: Welding with pressure |
ISO 9692-2:1998 | Welding and allied processes — Joint preparation — Part 2: Submerged arc welding of steels |
ISO 12216:2002 | Small craft Windows, portlights, hatches, deadlights and doors Strength and watertightness requirements |
ISO 4063:2009 | Welding and allied processes — Nomenclature of processes and reference numbers |
ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials General rules |
EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.