• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ISO 1302:2002

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

20-12-2021

Language(s)

English, French

Published date

14-02-2002

This International Standard specifies the rules for the indication of surface texture in technical product documentation (e.g. drawings, specifications, contracts, reports) by means of graphical symbols and textual indications.

It is applicable to the indication of requirements for surfaces by means of profile parameters, according to ISO 4287, related to the R-profile (roughness parameters), W-profile (waviness parameters) and P-profile (structural parameters), to motif parameters, according to ISO 12085, related to the roughness motif and waviness motif, as well as to parameters related to the material ratio curve according to ISO 13565-2 and ISO 13565-3.

NOTE For the indication of requirements for surface imperfections (pores, scratches etc.), which cannot be specified using surface texture parameters, reference is made to ISO 8785, which covers surface imperfections.

DevelopmentNote
Supersedes ISO/FDIS 1302 (02/2002)
DocumentType
Standard
Pages
46
PublisherName
International Organization for Standardization
Status
Superseded
SupersededBy
Supersedes

BS EN 61076-2-102:2002 Connectors for electronic equipment. Circular connectors Circular connectors with assessed quality. Detail specification for plugs and jacks for external low voltage power supply
I.S. EN 61515:2016 MINERAL INSULATED METAL-SHEATHED THERMOCOUPLE CABLES AND THERMOCOUPLES
I.S. EN ISO 286-2:2010 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS (ISO 286-2:2010)
DIN ISO 8062:1998-08 CASTINGS - SYSTEM OF DIMENSIONAL TOLERANCES AND MACHINING ALLOWANCES
DIN ISO 10110-8:2012-02 Optics and photonics - Preparation of drawings for optical elements and systems - Part 8: Surface texture; roughness and waviness (ISO 10110-8:2010)
DIN EN 16701:2015-04 ENERGETIC MATERIALS FOR DEFENCE - SAFETY, VULNERABILITY - FRIABILITY
UNE-EN 50180-2:2015 Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 2: Requirement for bushing components
BS ISO 5781:2000 Hydraulic fluid power. Pressure reducing valves, sequence valves, unloading valves, throttle valves and check valves. Mounting surfaces
14/30250046 DC : 0 BS EN 61076-2-111 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-111: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR POWER CONNECTORS WITH M12 SCREW-LOCKING
BS ISO 10073:2008 Tools for moulding. Support pillars
06/30157850 DC : 0 BS EN 13083 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - ADAPTOR FOR BOTTOM LOADING AND UNLOADING
11/30254515 DC : 0 BS EN 4560 - AEROSPACE SERIES - PIPE COUPLING 37 DEGREES, SPHERICAL, UP TO 21000 KPA - INCH SERIES - TECHNICAL SPECIFICATION
12/30260519 DC : 0 BS EN ISO 1179-1 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 1: THREADED PORTS (ISO/DIS 1179-1:2012)
BS EN 60512-16-9:2008 Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts and terminations. Test 16i. Grounding contact spring holding force
CEI EN 62282-6-300 : 2013 FUEL CELL TECHNOLOGIES - PART 6-300: MICRO FUEL CELL POWER SYSTEMS - FUEL CARTRIDGE INTERCHANGEABILITY
INCITS/ISO/IEC 15780 : 1998 INFORMATION TECHNOLOGY - 8 MM WIDE MAGNETIC TAPE CARTRIDGE - HELICAL SCAN RECORDING - AIT-1 FORMAT
INCITS/ISO/IEC 20062 : 2001 : R2007 INFORMATION TECHNOLOGY - 8 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - VXA-1 FORMAT
CEI EN 60603-7-1 : 2012 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-1: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS
DIN ISO 6414:1984-02 TECHNICAL DRAWINGS FOR GLASSWARE
14/30272936 DC : 0 BS EN ISO 17450-3 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 3: TOLERANCED FEATURES
INCITS/ISO/IEC 11319 : 1993 INFORMATION TECHNOLOGY - 8 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING
11/30247446 DC : 0 BS EN ISO 12625-11 - TISSUE PAPER AND TISSUE PRODUCTS - PART 11: DETERMINATION OF WET BALL BURST STRENGTH
BS ISO 16840-2:2018 Wheelchair seating Determination of physical and mechanical characteristics of seat cushions intended to manage tissue integrity
DIN ISO 11900-1:2011-10 Tools for pressing - Ball-lock punch retainers - Part 1: Types A and B, rectangular and square for light duty (ISO 11900-1:2007)
BS 2774(1983) : 1983 AMD 8620 SPECIFICATION FOR DRAWING CONVENTIONS FOR LABORATORY GLASS APPARATUS
UNE-EN ISO 1179-1:2014 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 1179-1:2013)
12/30270756 DC : 0 BS EN 61076-3-104 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-104: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED FREE AND FIXED CONNECTORS FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 2000 MHZ
10/30196826 DC : 0 BS ISO 12671 - THERMAL SPRAYING - THERMALLY SPRAYED COATINGS - SYMBOLIC REPRESENTATION ON DRAWINGS
10/30199074 DC : 0 BS ISO 6162-1 - HYDRAULIC FLUID POWER - FLANGE CONNECTORS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 1: FLANGE CONNECTORS FOR USE AT PRESSURES OF 3,5 MPA (35 BAR) TO 35 MPA (350 BAR), DN 13 TO DN 127
I.S. EN ISO 1938-2:2017 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES (ISO 1938-2:2017)
05/30138267 DC : DRAFT AUG 2005 EN 1426 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION
11/30242579 DC : 0 BS EN ISO 6873:2000 - DENTAL GYPSUM PRODUCTS
13/30263803 DC : 0 BS ISO 17296-4 - ADDITIVE MANUFACTURING - RAPID TECHNOLOGIES (RAPID PROTOTYPING) - PART 4: DATA PROCESSING
BS ISO 14541:2013 Hydraulic fluid power. Dimensions and requirements for screw-to-connect quick-action couplings for general purpose
ISO 7789:2007 Hydraulic fluid power Two-, three- and four-port screw-in cartridge valves Cavities
BS EN ISO 6149-1:2007 Connections for hydraulic fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing Ports with truncated housing for O-ring seal
ECMA 210 : 2ED 95 12,65 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DATA - D3-1 FORMAT
12/30276397 DC : 0 BS ISO/IEC 18745-1 - TEST METHODS FOR MACHINE READABLE TRAVEL DOCUMENTS (MRTD) - PART 1: PHYSICAL TEST METHODS FOR PASSPORT BOOKS (DURABILITY)
BS ISO 5599-2:2001 Pneumatic fluid power. Five-port directional control valves Mounting interface surfaces with optional electrical connector
ECMA 291 : 1ED 99 8 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING AIT-1 WITH MIC FORMAT
DIN EN ISO 2553:2014-04 WELDING AND ALLIED PROCESSES - SYMBOLIC REPRESENTATION ON DRAWINGS - WELDED JOINTS (ISO 2553:2013)
11/30245576 DC : DRAFT MAR 2011 BS EN 3155-001 - AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 001: TECHNICAL SPECIFICATION
08/30168345 DC : DRAFT JULY 2008 BS ISO 15136-1 - DOWNHOLE EQUIPMENT FOR PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS
14/30299349 DC : 0 BS EN ISO 1938-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES
00/201724 DC : DRAFT APR 2000 IEC 61076-1 - CONNECTORS - PRODUCT REQUIREMENTS - PART 1: GENERIC SPECIFICATION
ECMA 169 : 1ED 92 8 MM WIDE MAGNETIC TAPE CARTRIDGE DUAL AZIMUTH FORMAT FOR INFORMATION INTERCHANGE HELICAL SCAN RECORDING
ECMA 247 : 2ED 98 8 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - HH-1 FORMAT
ANSI INCITS 282 : 1996 : R2001 INFORMATION TECHNOLOGY - MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE 0.50 IN (12.65 MM), SERIAL SERPENTINE, 128 TRACK, 62 500 BPI (2460 BPMM) DLT3 FORMAT
DIN ISO 6149-3:1996-11 CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING - PART 3: LIGHT DUTY (L SERIES) STUD ENDS - DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS
DIN ISO 3601-2:2010-08 Fluid power systems - O-rings - Part 2: Housing dimensions for general applications (ISO 3601-2:2008)
I.S. EN 61076-3-103:2004 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 3-103: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR SINGLE ROW CONNECTORS WITH NON-REMOVABLE RIBBON CABLE CONTACTS ON 1,25 MM PITCH USED FOR HIGH SPEED SERIAL DATA (HSSDC)
EN ISO 4981 : 1997 RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF RESISTANCE TO COMBINED SHEAR FLEXING AND RUBBING
BS ISO 12085 : 96 AMD 9951 GEOMETRIC PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: PROFILE METHOD - MOTIF PARAMETERS
I.S. EN 60512-16-5:2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-5: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16E: GAUGE RETENTION FORCE (RESILIENT CONTACTS)
I.S. ENV 13419-2:1999 BUILDING PRODUCTS - DETERMINATION OF THE EMISSION OF VOLATILE ORGANIC COMPOUNDS - PART 2: EMISSION TEST CELL METHOD
INCITS/ISO/IEC 15521 : 1998 : R2005 INFORMATION TECHNOLOGY - 3,81 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DDS-3 FORMAT USING 125 M LENGTH TAPES
INCITS/ISO/IEC 11557 : 1992 : R1999 INFORMATION TECHNOLOGY - 3.81 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DDS-DC FORMAT USING 60 M AND 90 M LENGTH TAPES
ANSI INCITS 341 : 2000 : R2005 INFORMATION TECHNOLOGY - 25.4 MM (1 IN) TYPE DCRSI RECORDED INSTRUMENTATION - DIGITAL CARTRIDGE TAPE FORMAT
14/30304019 DC : 0 BS ISO 5781 - HYDRAULIC FLUID POWER - PRESSURE-REDUCING VALVES, SEQUENCE VALVES, UNLOADING VALVES, THROTTLE VALVES AND CHECK VALVES - MOUNTING SURFACES
BS 7389-1:1990 Pneumatic fluid power valve mounting surfaces Specification for five-port directional control valves (without electrical connector)
05/30135256 DC : DRAFT JUN 2005 ISO/DIS 1179-1 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 1: THREADED PORTS
PD 8888:2001 Technical product documentation (TPD). An interim report
15/30319542 DC : 0 BS ISO 484-1 - SHIPBUILDING - SHIP SCREW PROPELLERS - MANUFACTURING TOLERANCES - PART 1: PROPELLERS OF DIAMETER GREATER THAN 2,50 M
BS ISO 10135:1994 Technical drawings. Simplified representation of moulded, cast and forged parts
BS EN 61076-4-101:2001 Connectors for electronic equipment Printed board connectors with assessed quality. Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917
BS EN ISO 1179-4:2008 Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Stud ends for general use only with metal-to-metal sealing (type B)
BS ISO 484-2:2015 Shipbuilding. Ship screw propellers. Manufacturing tolerances Propellers of diameter between 0,80 and 2,50 m inclusive
BS EN ISO/IEC 9661:1997 Information technology. Data interchange on 12,7 mm wide magnetic tape cartridges. 18 tracks, 1 491 data bytes per millimetre
BS EN ISO 8062-3:2007 Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts General dimensional and geometrical tolerances and machining allowances for castings
BS EN 62282-6-300:2013 Fuel cell technologies Micro fuel cell power systems. Fuel cartridge interchangeability
INCITS/ISO/IEC 13923 : 1996 : R2002 INFORMATION TECHNOLOGY - 3,81 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DDS-2 FORMAT USING 120 M LENGTH TAPE
BS EN ISO 12671:2014 Thermal spraying. Thermally sprayed coatings. Symbolic representation on drawings
07/30165274 DC : 0 BS EN 61076-2-106 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-106: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CIRCULAR CONNECTORS M16 * 0.75 WITH SCREW-LOCKING DEGREE OF PROTECTION IP40
DD ENV 1999-1.1 : DRAFT DEC 2000 EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 101: GENERAL RULES - GENERAL RULES AND RULES FOR BUILDINGS
96/709825 DC : DRAFT JUL 1996 ISO/CD 6164-2 - HYDRAULIC FLUID POWER - ONE-PIECE SQUARE-FLANGE CONNECTORS - PART 2: FOUR-SCREW SQUARE-FLANGE CONNECTORS FOR USE AT PRESSURES OF 31,5 MPA (315 BAR) TO 40 MPA (400 BAR), DN 10 TO DN 80
BS EN ISO 12625-11:2012 Tissue paper and tissue products Determination of wet ball burst strength
BS ISO 4148:2004 Road vehicles. Special warning lamps. Dimensions
DIN 504:2004-09 DRIVING COMPONENTS - EYE-TYPE BEARINGS
CAN/CSA-ISO/IEC 16382-04 (R2014) Information Technology - Data Interchange on 12,7 mm 208-Track Magnetic Tape Cartridges - DLT 6 Format (Adopted ISO/IEC 16382:2000, first edition, 2000-05-15)
ECMA 170 : 1ED 92 3,81 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DDS FORMAT USING 60 M AND 90 M LENGTH TAPES
BS EN ISO 17450-3:2016 Geometrical product specifications (GPS). General concepts Toleranced features
BS EN ISO 1179-3:2008 Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H)
02/206147 DC : DRAFT AUG 2002 IEC 60603-7-4 ED.1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-4: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 250 MHZ (CAT 6, UNSHIELDED)
01/714272 DC : 0 ISO/DIS 1179-1 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 1: THREADED PORTS
CSA ISO/IEC 22051:2004 INFORMATION TECHNOLOGY - DATA INTERCHANGE ON 12,7 MM, 448-TRACK MAGNETIC TAPE CARTRIDGES - SDLT1 FORMAT
BS EN 61515:1996 Mineral insulated thermocouple cables and thermocouples
BS EN 60130-9:2011 Connectors for frequencies below 3 MHz Circular connectors for radio and associated sound equipment
08/30174605 DC : DRAFT SEP 2008 BS ISO 5597 - HYDRAULIC FLUID POWER - CYLINDERS - HOUSINGS FOR SINGLE-ACTING PISTON AND ROD SEALS IN RECIPROCATING APPLICATIONS - DIMENSIONS AND TOLERANCES
ANSI INCITS 328 : 2000 : R2015 INFORMATION TECHNOLOGY - 19 MM DD-2 HELICAL SCAN DIGITAL COMPUTER TAPE CASSETTE FOR INFORMATION INTERCHANGE
ECMA 329 : 1ED 2001 8 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - AIT-3 FORMAT
PREN 4560 : 200P2 AEROSPACE SERIES - PIPE COUPLING, 37 DEGREES, SPHERICAL, UP TO 21000 KPA - INCH SERIES - TECHNICAL SPECIFICATION
BS 5595-2:1981 Interchangeable magnetic twelve-disk pack for information processing Specification for 200 Mbytes magnetic twelve-disk pack
PD 5500:2000 SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS
BS EN 60127-6:2014 Miniature fuses Fuse-holders for miniature fuse-links
ANSI INCITS 197 : 1991 : R2017 INFORMATION SYSTEMS - UNRECORDED MAGNETIC TAPE AND CARTRIDGE FOR INFORMATION INTERCHANGE 1/2 IN (12.65 MM), SERIAL SERPENTINE, 22-TRACK, 6667 FTPI (262 FTPMM) AND 48-TRACK, 10,000 FTPI (394 FTPMM)
CSA ISO/IEC 10373-1:2007 IDENTIFICATION CARDS - TEST METHODS - PART 1: GENERAL CHARACTERISTICS
PREN 2604 : 200P1 AEROSPACE SERIES - STRAIGHT METRIC-SIZE UNIONS WITH LOCKING RING - 8 DEGREES 30 MINUTES UNION INTERFACE - DIMENSIONS
PREN 2603 : 200P1 AEROSPACE SERIES - STRAIGHT METRIC-SIZE UNIONS WITH LOCKING RING - PORT END - DIMENSIONS
ANSI INCITS 312 : 1998 INFORMATION TECHNOLOGY - MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE, 0.50 IN (12.65 MM), SERIAL SERPENTINE, 128-TRACK, 81 600 BPI (3212 BPMM) DLT4 FORMAT
ANSI INCITS 328 : 2000 INFORMATION TECHNOLOGY - 19 MM DD-2 HELICAL SCAN DIGITAL COMPUTER TAPE CASSETTE FOR INFORMATION INTERCHANGE
DIN 505:2004-09 DRIVING COMPONENTS - CAP BEARINGS, HALF BEARINGS - FASTENING WITH TWO SCREWS
PREN 2602 : 200P1 AEROSPACE SERIES - PORTS FOR INSTALLATION OF STRAIGHT METRIC-SIZE UNIONS WITH LOCKING RING - DIMENSIONS
CEI EN 61076-2-102 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 2-102: CIRCULAR CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR PLUGS AND JACKS FOR EXTERNAL LOW VOLTAGE POWER SUPPLY
INCITS/ISO/IEC 12246 : 1993 INFORMATION TECHNOLOGY - 8 MM WIDE MAGNETIC TAPE CARTRIDGE DUAL AZIMUTH FORMAT FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING
CSA ISO/IEC 18836 : 2004 INFORMATION TECHNOLOGY - 8 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - MAMMOTHTAPE-2 FORMAT
ANSI INCITS 315 : 1998 INFORMATION TECHNOLOGY - MAGNETIC TAPE AND CARTRIDGE FOR INFORMATION INTERCHANGE - UNRECORDED, 128-TRACK, PARALLEL SERPENTINE, 12.65 MM (1/2 IN), 2550 FTPMM (64 770 FTPI)
PREN 3155-001 : 200P5 AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 001: TECHNICAL SPECIFICATION
STANAG 3323 : 0 PIPE (TUBE) CONNECTIONS TO AIRCRAFT INSTRUMENTS (IMPERIAL AND METRIC)
AAMI ISO 5356-1 : 2004 ANAESTHETIC AND RESPIRATORY EQUIPMENT - CONICAL CONNECTORS - PART 1: CONES AND SOCKETS
I.S. EN 61076-2-107:2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-107: DETAIL SPECIFICATION FOR CIRCULAR HYBRID CONNECTORS M12 WITH ELECTRICAL AND FIBRE-OPTIC CONTACTS WITH SCREW LOCKING
IEC PAS 61076-2-109:2010 Connectors for electronic equipment - Product requirements - Part 2-109: Circular connectors - Detail specification for connectors M12 x 1 with screw-locking, for data transmissions with frequencies up to 500 MHz
I.S. EN 60130-9:2011 CONNECTORS FOR FREQUENCIES BELOW 3 MHZ - PART 9: CIRCULAR CONNECTORS FOR RADIO AND ASSOCIATED SOUND EQUIPMENT
I.S. EN ISO 6149-1:2007 CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 1: PORTS WITH TRUNCATED HOUSING FOR O-RING SEAL
I.S. EN ISO 10135:2009 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DRAWING INDICATIONS FOR MOULDED PARTS IN TECHNICAL PRODUCT DOCUMENTATION (TPD)
I.S. EN 26873:1992 DENTISTRY - DENTAL GYPSUM PRODUCTS
IEC 60884-2-4:2007 Plugs and socket-outlets for household and similar purposes - Part 2-4: Particular requirements for plugs and socket-outlets for SELV
CSA B78.2 : 0 DIMENSIONING AND TOLERANCING OF TECHNICAL DRAWINGS
AAGSP-02 : 2015 CHARACTERISTICS OF GASEOUS BREATHING OXYGEN, LIQUID BREATHING OXYGEN AND SUPPLY PRESSURES, HOSES AND REPLENISHMENT COUPLINGS
I.S. EN 61076-4-101:2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-101: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART CONNECTOR MODULES, HAVING A BASIC GRID OF 2,0 MM FOR PRINTED BOARDS AND BACKPLANES IN ACCORDANCE WITH IEC 60917
AWS C4.6M : 2006 THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRIC PRODUCT SPECIFICATION AND QUALITY TOLERANCES
ANSI INCITS 213 : 1994 INFORMATION TECHNOLOGY - 90-MM (3.54-IN) OPTICAL DISK CARTRIDGE REWRITABLE AND READ ONLY USING DISCRETE BLOCK FORMAT (DBF) METHOD FOR DIGITAL INFORMATION INTERCHANGE
UNE-EN ISO 286-2:2011 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)
BS 2000-49(2000) : 2000 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION
CEI EN 61076-4-111 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT PART 4-111: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART POWER CONNECTOR MODULES, FOR PRINTED BOARDS AND BACKPLANES HAVING EARLY MATING FEATURES, AND HAVING A BASIC GRID OF 2,5 MM IN ACCORDANCE WITH IEC 60917-1
I.S. EN ISO 12671:2014 THERMAL SPRAYING - THERMALLY SPRAYED COATINGS - SYMBOLIC REPRESENTATION ON DRAWINGS (ISO 12671:2012)
ISO 18084:2011 Press tools for tablets — Punches and dies
ISO 13012-2:2009 Rolling bearings Accessories for sleeve type linear ball bearings Part 2: Boundary dimensions and tolerances for series 5
ISO 8399-2:1998 Aerospace — Accessory drives and mounting flanges (Metric series) — Part 2: Dimensions
CEI EN 61515 : 1997 MINERAL INSULATED METAL-SHEATHED THERMOCOUPLE CABLES AND THERMOCOUPLES
ISO/IEC 15307:1997 Information technology — Data interchange on 12,7 mm 128-track magnetic tape cartridges — DLT 4 format
ISO 6195:2013 Fluid power systems and components Cylinder-rod wiper-ring housings in reciprocating applications Dimensions and tolerances
ISO 4148:2004 Road vehicles Special warning lamps Dimensions
ISO/IEC 9661:1994 Information technology Data interchange on 12,7 mm wide magnetic tape cartridges 18 tracks, 1 491 data bytes per millimetre
I.S. EN 61076-2-113:2017 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-113: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS WITH M12 SCREW LOCKING WITH POWER AND SIGNAL CONTACTS FOR DATA TRANSMISSION WITH FREQUENCY UP TO 100 MHZ
ECMA 198 : 2ED 95 3,81 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DDS-2 FORMAT USING 120 M LENGTH TAPES
BS 2000-49(2007) : 2007 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION
ECMA 259 : 1ED 97 DATA INTERCHANGE ON 12,7 MM 208-TRACK MAGNETIC TAPE CARTRIDGES - DLT5 FORMAT
EN 1400:2013+A1:2014 Child use and care articles - Soothers for babies and young children - Safety requirements and test methods
I.S. EN ISO 17450-3:2016 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS PART 3: TOLERANCED FEATURES (ISO 17450-3:2016)
BS EN 61076-1:2006 Connectors for electronic equipment. Product requirements Generic specification
CEI EN 60512-16-9 : 2009 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-9: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16I: GROUNDING CONTACT SPRING HOLDING FORCE
BIS IS 10187 : 2013 HYDRAULIC FLUID POWER - FOUR-PORT DIRECTIONAL CONTROL VALVES - MOUNTING SURFACES
I.S. EN ISO 25178-1:2016 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 1: INDICATION OF SURFACE TEXTURE (ISO 25178-1:2016)
ISO 14541:2013 Hydraulic fluid power — Dimensions and requirements for screw-to-connect quick-action couplings for general purpose
ISO 10372:1992 Hydraulic fluid power — Four- and five-port servovalves — Mounting surfaces
I.S. EN ISO 1179-2:2013 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS WITH ELASTOMERIC SEALING (TYPE E) (ISO 1179-2:2013)
I.S. EN 61076-2-105:2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-105: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR M5 CONNECTORS WITH SCREW-LOCKING
ISO 6414:1982 Technical drawings for glassware
ISO/IEC 10373:1993 Identification cards Test methods
ISO 7465:2007 Passenger lifts and service lifts — Guide rails for lift cars and counterweights — T-type
UNE-EN 856:2015 Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification
ISO/IEC 11321:1992 Information technology 3,81 mm wide magnetic tape cartridge for information interchange Helical scan recording DATA/DAT format
DIN EN 13081:2012-05 Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler (includes Amendment A1:2012)
DIN EN 14879-1 E : 2005 ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 1: TERMINOLOGY, DESIGN AND PREPARATION OF SUBSTRATE
BS EN ISO 12402-7 : 2007 PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS
BS EN 14665:2004 Thermal spraying. Thermally sprayed coatings. Symbolic representation on drawings
DIN EN 14879-1:2005-12 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate
BS EN 196-1:2016 Methods of testing cement Determination of strength
BS EN 12332-1:1999 Rubber- or plastics-coated fabrics. Determination of bursting strength Steel ball method
BS EN ISO 4288:1998 Geometric product specification (GPS). Surface texture. Profile method: Rules and procedures for the assessment of surface texture
ISO 12402-7:2006 Personal flotation devices Part 7: Materials and components Safety requirements and test methods
BS EN 14350-1:2004 Child use and care articles. Drinking equipment General and mechanical requirements and tests
IEC 61076-3-103:2003 Connectors for electronic equipment - Part 3-103: Rectangular connectors - Detail specification for single row connectors with non-removable ribbon cable contacts on 1,25 mm pitch used for high speed serial data (HSSDC)
IEC 61076-4-111:2002 Connectors for electronic equipment - Part 4-111: Printed board connectors with assessed quality - Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm in accordance with IEC 60917-1
BS EN ISO 12085 : 1998 GEOMETRIC PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: PROFILE METHOD - MOTIF PARAMETERS
UNE-EN 854:2015 Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification
BS EN 857:2015 Rubber hoses and hose assemblies. Wire braid reinforced compact type for hydraulic applications. Specification
BS EN 4560:2015 Aerospace series. Pipe coupling 37°, spherical up to 21 000 kPa. Inch series. Technical specification
UNE-EN 16313:2014 Connections for heating and cooling appliances - Detachable connection with outside threaded pipe G ¾ A and inside cone
IEC 61076-2-105:2008 Connectors for electronic equipment - Product requirements - Part 2-105: Circular connectors - Detail specification for M5 connectors with screw-locking
I.S. EN 854:2015 RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE REINFORCED HYDRAULIC TYPE - SPECIFICATION
DIN 740-1:1986-08 POWER TRANSMISSION ENGINEERING; FLEXIBLE SHAFT COUPLINGS; TECHNICAL DELIVERY CONDITIONS
EN 61076-5 : 2001 CONNECTORS FOR USE IN D.C., LOW-FREQUENCY ANALOGUE AND DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 5: IN-LINE SOCKETS WITH ASSESSED QUALITY - SECTIONAL SPECIFICATION
EN ISO 19054:2006/A1:2016 RAIL SYSTEMS FOR SUPPORTING MEDICAL EQUIPMENT (ISO 19054:2005/AMD 1:2016)
EN 175301-801:2006 Detail Specification: High density rectangular connectors, round removable crimp contacts
IEC 60335-2-40:2018 RLV Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
EN 50243:2002 Outdoor bushings for 24 kV and 36 kV and for 5 kA and 8 kA, for liquid filled transformers
EN 61076-4-108:2002 Connectors for electronic equipment - Part 4-108: Printed board connectors with assessed quality - Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1
EN 61076-4-101:2001 Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality - Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917
EN 60603-7-5:2010 Connectors for electronic equipment - Part 7-5: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz
OVE/ONORM EN 61076-2-101 : 2013 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-101: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR M12 CONNECTORS WITH SCREW-LOCKING (IEC 61076-2-101:2012)
EN 12332-1 : 1998 RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF BURSTING STRENGTH - PART 1: STEEL BALL METHOD
EN 13083:2008+A1:2013 Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading
DIN ISO 10242-2:2010-11 Tools for pressing - Punch holder shanks - Part 2: Type C (ISO 10242-2:2008)
DIN EN 562:2003-09 GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES
EN 61076-4-114:2003 Connectors for electronic equipment - Part 4-114: Printed board connectors - Detail specification for two-part connector with integrated shielding function having a grid of 1 mm x 1,5 mm
DIN EN 14665:2005-02 THERMAL SPRAYING - THERMALLY SPRAYED COATINGS - SYMBOLIC REPRESENTATION ON DRAWINGS
EN 61076-2-106:2011 Connectors for electronic equipment - Product requirements - Part 2-106: Circular connectors - Detail specification for connectors M 16 x 0,75 with screw-locking and degree of protection IP40 or IP65/67
OVE/ONORM EN 61076-2-104 : 2015 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-104: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CIRCULAR CONNECTORS WITH M8 SCREW-LOCKING OR SNAP-LOCKING (IEC 61076-2-104:2014)
EN 12890:2000 Founding - Patterns, pattern equipment and coreboxes for the production of sand moulds and sand cores
DIN EN 14882:2005-11 Rubber or plastic coated fabrics - Determination of the static and dynamic coefficient of friction
EN 61076-2-104:2014 Connectors for electronic equipment - Product requirements - Part 2-104: Circular connectors - Detail specification for circular connectors with M8 screw-locking or snap-locking
EN 61076-1:2006 Connectors for electronic equipment - Product requirements - Part 1: Generic specification
EN 13081:2008+A1:2012 Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler
EN 50180-2:2015 Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 2: Requirement for bushing components
EN 61076-4-113:2003 Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications
DIN EN 853:2016-09 Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification
EN 61076-4-110:2002 Connectors for electronic equipment - Part 4-110: Printed board connectors with assessed quality - Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function
ONORM EN ISO 8062-3 : 2009 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS
11/30050625 DC : 0 BS EN ISO 2553 - WELDING AND ALLIED PROCESSES - SYMBOLIC REPRESENTATION ON DRAWINGS - WELDED, BRAZED AND SOLDERED JOINTS
DIN 1197-2:1990-06 PICK EYES - OVAL - PLUG GAUGES
DIN ISO 13012-2:2010-02 Rolling bearings - Accessories for sleeve type linear ball bearings - Part 2: Boundary dimensions and tolerances for series 5 (ISO 13012-2:2009)
DIN ISO 6149-2:1996-11 PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING - PART 2: HEAVY DUTY (S SERIES) STUD ENDS - DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS
ISO 10069-2:2008 Tools for pressing — Elastomer pressure springs — Part 2: Specification of accessories
DIN EN ISO 12671:2014-07 Thermal spraying - Thermally sprayed coatings - Symbolic representation on drawings (ISO 12671:2012)
BS EN 61076-2-106:2011 Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for connectors M 16 x 0,75 with screw-locking and degree of protection IP40 or IP65/67
BS EN ISO/IEC 10373:1995 Identification cards. Test methods
BS ISO 6621-2:2003 Internal combustion engines. Piston rings Inspection measuring principles
BS EN ISO 10135:2009 Geometrical product specifications (GPS). Drawing indications for moulded parts in technical product documentation (TPD)
DIN ISO 6149-1:1996-11 CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING - PART 1: PORTS WITH O-RING SEAL IN TRUNCATED HOUSING
DIN ISO 128-22:1999-11 Technical drawings - General principles of presentation - Part 22: Basic conventions and applications for leader lines and reference lines (ISO 128-22:1999)
BS ISO 6149-3:1993 Connections for fluid power and general use. Ports and stud ends with ISO 261 threads and O-ring sealing Light-duty (L series) stud ends. Dimensions, design, test methods and requirements
INCITS/ISO/IEC 18836 : 2001 INFORMATION TECHNOLOGY - 8 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - MAMMOTH TAPE-2 FORMAT
UNE-EN ISO 8430-2:2016 Resistance spot welding - Electrode holders - Part 2: Morse taper fixing (ISO 8430-2:2016)
15/30322585 DC : 0 BS EN ISO 12402-7 - PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS
INCITS/ISO/IEC 18836 : 2001 : R2006 INFORMATION TECHNOLOGY - 8 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - MAMMOTH TAPE-2 FORMAT
I.S. EN 14665:2004 THERMAL SPRAYING - THERMALLY SPRAYED COATINGS - SYMBOLIC REPRESENTATION ON DRAWINGS
05/30110749 DC : DRAFT SEP 2005 ISO/IEC 10373-1 - IDENTIFICATION CARDS - PART 1: GENERAL CHARACTERISTICS
BS EN 60603-7-1:2011 Connectors for electronic equipment Detail specification for 8-way, shielded, free and fixed connectors
BS ISO 8693:2011 Tools for moulding. Flat ejector pins
BS ISO/IEC 11559:1993 Information technology. Data interchange on 12,7 mm wide 18-track magnetic tape cartridges. Extended format
DIN EN ISO 1938-1:2016-03 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015)
07/30173191 DC : 0 BS ISO 5171 - GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES
ISO 4401:2005 Hydraulic fluid power — Four-port directional control valves — Mounting surfaces
BS EN 50180-2:2015 Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers Requirement for bushing components
BS ISO 7789:2007 Hydraulic fluid power. Two-, three- and four-port screw-in cartridge valves. Cavities
ISO/IEC 15757:1998 Information technology Data interchange on 8 mm wide magnetic tape cartridge Helical scan recording DA-2 format
01/714274 DC : 0 ISO/DIS 1179-3 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H)
BS ISO 13486-1:1999 Road vehicles. Hydraulic braking systems Double-flare pipes, tapped holes, male fittings and tube seats
I.S. EN ISO 16000-10:2006 INDOOR AIR - PART 10: DETERMINATION OF THE EMISSION OF VOLATILE ORGANIC COMPOUNDS FROM BUILDING PRODUCTS AND FURNISHING - EMISSION TEST CELL METHOD
DIN CEN ISO/TS 8062-2;DIN SPEC 91184:2014-03 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013)
BS ISO 10110-8:2010 Optics and photonics. Preparation of drawings for optical elements and systems Surface texture; roughness and waviness
BS ISO 10069-1:2008 Tools for pressing. Elastomer pressure springs General specification
BS EN 61076-2-105:2008 Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for M5 connectors with screw-locking
ANSI INCITS 266 : 1996 : R2001 INFORMATION TECHNOLOGY - MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE, 0.50 IN (12.65 MM), SERIAL SERPENTINE, 112-TRACK, 42 500 BPI (1 673 BPMM), DLT2 FORMAT
CEI EN 61076-4-110 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-110: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR LATCHED CABLE CONNECTOR SYSTEM HAVING A BASIC GRID OF 2,0 MM INCLUDING FULL SHIELDING AND LATCHING FUNCTION
BS 5595-1:1978 Interchangeable magnetic twelve-disk pack for information processing Specification for 100 Mbytes magnetic twelve-disk pack
DIN EN ISO 8015:2011-09 Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011)
ANSI INCITS 345 : 2001 MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE, 0.50 IN (12.65 MM), SERIAL SERPENTINE, 208-TRACK, 98214 BPI (3866 BPMM) DLT6 FORMAT
BS ISO 8062-4:2017 Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts General tolerances for castings using profile tolerancing in a general datum system
ISO/IEC 20062:2001 Information technology 8 mm wide magnetic tape cartridge for information interchange Helical scan recording VXA-1 format
15/30333838 DC : 0 BS ISO/ASTM 52901 - ADDITIVE MANUFACTURING - GENERAL PRINCIPLES - REQUIREMENTS FOR PURCHASED AM PARTS
06/30128792 DC : DRAFT JUN 2006 ISO 7789 - HYDRAULIC FLUID POWER - TWO, THREE AND FOUR-PORT SCREW-IN CARTRIDGE VALVES - CAVITIES
PD CEN ISO/TS 8062-2:2013 Geometrical Product Specifications (GPS). Dimensional and geometrical tolerances for moulded parts Rules
BS ISO 18418-1:2014 Gasoline engines. Medium pressure liquid fuel supply connections 60° female cone connectors
DIN ISO 4379:1995-10 PLAIN BEARINGS - COPPER ALLOY BUSHES
BS ISO 12671 : 2012 THERMAL SPRAYING - THERMALLY SPRAYED COATINGS - SYMBOLIC REPRESENTATION ON DRAWINGS
INCITS/ISO/IEC 11557 : 1992 : R2004 INFORMATION TECHNOLOGY - 3.81 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DDS-DC FORMAT USING 60 M AND 90 M LENGTH TAPES
BS EN ISO 1179-1:2013 Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Threaded ports
DD IEC/PAS 61076-2-109:2010 Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for connectors M 12 × 1 with screw-locking, for data transmissions with frequencies up to 500 MHz
ANSI INCITS 266 : 1996 : R2006 INFORMATION TECHNOLOGY - MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE, 0.50 IN (12.65 MM), SERIAL SERPENTINE, 112-TRACK, 42 500 BPI (1 673 BPMM), DLT2 FORMAT
BS ISO 13948-1:2015 Diesel engines. Fuel injection pumps and fuel injector low-pressure connections Threaded connections
11/30232899 DC : 0 BS ISO 6162-2 - HYDRAULIC FLUID POWER - FLANGE CONNECTIONS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 2: FLANGE CONNECTORS, PORTS AND MOUNTING SURFACES FOR USE AT A PRESSURE OF 42 MPA (420 BAR), DN 13 TO DN 76
BS ISO 15407-2:2003 Pneumatic fluid power. Five-port directional control valves, sizes 18 mm and 26 mm Mounting interface surfaces with optional electrical connector
BS EN 16701:2014 Energetic materials for defence. Safety, vulnerability. Friability
BS ISO 8694:2011 Tools for moulding. Shouldered ejector pins
BS ISO 3601-2:2016 Fluid power systems. O-rings Housing dimensions for general applications
BS ISO 6751:2011 Tools for moulding. Ejector pins with cylindrical head
BS ISO 9181:2007 Tools for pressing. Round punches with 60° conical head and reduced shank
BS EN 61076-3-118:2010 Connectors for electronic equipment. Product requirements Rectangular connectors. Detail specification for a 4 pole + PE power connector with push-pull coupling
05/30135258 DC : DRAFT JUN 2005 ISO 1179-2 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS AND ELASTOMERIC SEALING (TYPE E)
BS ISO 10372:1992 Hydraulic fluid power. Four-and five-port servovalves. Mounting surfaces
BS ISO 11900-1:2007 Tools for pressing. Ball-lock punch retainers Types A and B, rectangular and square for light duty
ISO/IEC 10777:1991 Information technology — 3,81 mm wide magnetic tape cartridge for information interchange — Helical scan recording — DDS format
ANSI INCITS 341 : 2000 INFORMATION TECHNOLOGY - 25.4 MM (1 IN) TYPE DCRSI RECORDED INSTRUMENTATION - DIGITAL CARTRIDGE TAPE FORMAT
UNI EN ISO 8062-3 : 2009 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS
BS ISO 8018:2007 Tools for moulding. Guide bushes, headed, and locating guide bushes, headed
BS ISO 17775:2006 Aircraft. Ground-service connections. Potable water, toilet-flush water and toilet drain
CAN/CSA-ISO/IEC 23651-04 (R2014) Information Technology - 8 mm Wide Magnetic Tape Cartridge for Information Interchange - Helical Scan Recording - AIT-3 Format (Adopted ISO/IEC 23651:2003, first edition, 2003-08-01)
07/30144373 DC : 0 BS ISO 3601-2 - FLUID POWER SYSTEMS - O-RINGS - PART 2: HOUSING DIMENSIONS FOR GENERAL APPLICATIONS
DIN CEN ISO/TS 8062-2; DIN SPEC 91184:2014-03 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013)
10/30234803 DC : 0 BS EN 61169-1 ED.2 - RADIO FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS
NF EN 61076 4 115 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-115: PRINTED BOARD CONNECTORS - BACKPLANE CONNECTOR FOR INFINIBAND EQUIPMENT
15/30320011 DC : 0 BS ISO 484-2 - SHIPBUILDING - SHIP SCREW PROPELLERS - MANUFACTURING TOLERANCES - PART 2: PROPELLERS OF DIAMETER BETWEEN 0,80 AND 2,50 M INCLUSIVE
07/30164079 DC : 0 BS ISO 679 - METHODS OF TESTING CEMENTS - DETERMINATION OF STRENGTH
03/100166 DC : DRAFT JAN 2003 IEC 60603-7-5 ED.1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-5: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 250 MHZ
BS ISO 9449:2007 Tools for moulding. Centring sleeves
BS ISO/IEC 12247:1993 Information technology. 3,81 mm wide magnetic tape cartridge for information interchange. Helical scan recording. DDS format using 60 m and 90 m length tapes
03/100167 DC : DRAFT JAN 2003 IEC 60603-3-105 ED.1 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 3-105: DETAIL SPECIFICATION FOR 4 PAIR BALANCED, INDIVIDUALLY SHIELDED, FIXED AND FREE CONNECTORS WITH CHARACTERISTIC IMPEDENCE OF 100 OHMS, COVERING A FREQUENCY RANGE FROM DC TO 1500 MHZ
BS ISO/IEC 13923:1996 Information technology. 3,81 mm wide magnetic tape cartridge for information interchange. Helical scan recording. DDS-2 format using 120 m length tape
DIN EN ISO 1179-1:2014-03 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 1179-1:2013)
BS ISO 15786:2008 Technical drawings. Simplified representation and dimensioning of holes
BS EN ISO 286-2:2010 Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes Tables of standard tolerance classes and limit deviations for holes and shafts
UNI EN ISO 10135 : 2009 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DRAWING INDICATIONS FOR MOULDED PARTS IN TECHNICAL PRODUCT DOCUMENTATION (TPD)
09/30185454 DC : 0 BS ISO 10110-8 - OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 8: SURFACE TEXTURE
DD ENV 61111:2002 Matting of insulating material for electrical purposes
CEI EN 61076-2-106 : 2012 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-106: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS M 16 X 0,75 WITH SCREW-LOCKING AND DEGREE OF PROTECTION IP40 OR IP65/67
04/30112325 DC : DRAFT APR 2004 IEC 61076-3-104 ED.2 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 3-104: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR 8-WAY, SHIELDED FREE AND FIXED CONNECTORS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 1000 MHZ
10/30216372 DC : 0 BS EN 61076-2-101 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-101: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR M12 CONNECTORS WITH SCREW-LOCKING
05/30140423 DC : DRAFT OCT 2005 ISO 7465 - PASSENGER LIFTS AND SERVICE LIFTS - GUIDE RAILS FOR LIFT CARS AND COUNTERWEIGHTS - T-TYPE
BS QC 480000(1995) : 1995 CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C. LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED DATA APPLICATIONS - PART 1: GENERIC SPECIFICATION
BS EN 61076-4-113:2003 Connectors for electronic equipment Printed board connectors with assessed quality Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications
EN 61076-2-113:2017 Connectors for electronic equipment - Product requirements - Part 2-113: Circular connectors - Detail specification for connectors with M12 screw locking with power and signal contacts for data transmission with frequency up to 100 MHz
02/564963 DC : DRAFT NOV 2002 EN 13419-2 - BUILDING PRODUCTS - DETERMINATION OF THE EMISSION OF VOLATILE ORGANIC COMPOUNDS - PART 2: EMISSION TEST CELL METHOD
CSA ISO/IEC 10373-1 : 2007 : R2012 IDENTIFICATION CARDS - TEST METHODS - PART 1: GENERAL CHARACTERISTICS
INCITS/ISO/IEC 15521 : 1998 INFORMATION TECHNOLOGY - 3,81 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DDS-3 FORMAT USING 125 M LENGTH TAPES
I.S. EN ISO 1179-4:2008 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B)
CEI EN 50299-2 : 2016 OIL-IMMERSED CABLE CONNECTION ASSEMBLIES FOR TRANSFORMERS AND REACTORS HAVING HIGHEST VOLTAGE FOR EQUIPMENT UM FROM 72,5 KV TO 550 KV - PART 2: DRY-TYPE CABLE TERMINATIONS
BS EN 61076-3-103:2004 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Rectangular connectors Detail specification for single row connectors with non-removable ribbon cable contacts on 1,25 mm pitch used for high speed serial data (HSSDC)
PREN 2645 : 200P1 AEROSPACE SERIES - STRAIGHT METRIC-SIZE UNIONS WITH LOCKING RING - LOCKING RING - DIMENSIONS
ANSI INCITS 267 : 1996 : R2006 INFORMATION TECHNOLOGY - HELICAL-SCAN DIGITAL COMPUTER TAPE CARTRIDGE, 12.65 MM (0.498 IN), FOR INFORMATION INTERCHANGE
CEI EN 60512-16-5 : 2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-5: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16E: GAUGE RETENTION FORCE (RESILIENT CONTACTS)
BS ISO/IEC 11557:1992 Information technology. 3,81 mm wide magnetic tape cartridge for information interchange. Helical scan recording. DDS-DC format using 60 m and 90 m length tapes
CSA E60127.6 : 2003 MINIATURE FUSES - PART 6: FUSE-HOLDERS FOR MINIATURE CARTRIDGE FUSE-LINKS
CEI EN 61076-4-115 : 2004 CONNECTORS FOR ELECTRONIC EQUIPMENT PART 4-115: PRINTED BOARD CONNECTORS BACKPLANE CONNECTOR FOR INFINIBAND EQUIPMENT
CSA ISO/IEC 10373-1 : 2007 : INC : AMD 1 : 2014 : R201200 IDENTIFICATION CARDS - TEST METHODS - PART 1: GENERAL CHARACTERISTICS
CAN/CSA-E60127-6-03 (R2017) Miniature Fuses - Part 6: Fuse-Holders for Miniature Cartridge Fuse-Links (Adopted CEI/IEC 127-6:1994, first edition, 1994-04, including Amendment 1:1996, with Canadian deviations) | Coupe-circuit miniatures - Partie 6: Ensembles-porteurs pour cartouches de coupe-circuit miniatures (norme CEI/IEC 127-6:1994 adoptée, première édition, 1994-04, y compris l\'Amendement 1:1996, avec exigences propres au Canada)
BS IEC 61111:1992 Matting of insulating material for electrical purposes
BS 2000-49(2015) : 2015 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION
CAN/CSA-ISO/IEC 20062-04 (R2012) Information Technology - 8 mm Wide Magnetic Tape Cartridge for Information Interchange - Helical Scan Recording - VXA-1 Format (Adopted ISO/IEC 20062:2001, first edition, 2001-12-15)
06/30133697 DC : 0 EN 1177 - IMPACT ATTENUATING PLAYGROUND SURFACING - TEST METHODS
CAN/CSA-ISO/IEC 10373-2:16 Identification cards - Test methods - Part 2: Cards with magnetic stripes (Adopted ISO/IEC 10373-2:2015, third edition, 2015-01-15)
PREN 6096 : DRAFT 2018 AEROSPACE SERIES - BEARING, SPHERICAL PLAIN WITH SELF-LUBRICATING LINER, EXTRA WIDE INNER RING IN CORROSION RESISTING STEEL - DIMENSIONS AND LOADS - INCH SERIES
DIN ISO 15786:2014-12 TECHNICAL DRAWINGS - SIMPLIFIED REPRESENTATION AND DIMENSIONING OF HOLES (ISO 15786:2008)
CSA ISO/IEC 20062 : 2004 INFORMATION TECHNOLOGY - 8 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - VXA-1 FORMAT
ISO 484-2:2015 Shipbuilding — Ship screw propellers — Manufacturing tolerances — Part 2: Propellers of diameter between 0,80 and 2,50 m inclusive
ECMA 145 : 1ED 90 8 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING
DIN 506:2004-09 DRIVING COMPONENTS - CAP-BEARINGS, HALF BEARINGS - FASTENING WITH FOUR SCREWS
DIN 3969-1:1991-10 SURFACE ROUGHNESS OF TOOTH FLANKS; ROUGHNESS PARAMETERS, SURFACE GRADES
CSA Z234.3 : 1989 GUIDE FOR THE SELECTION AND USE OF PREFERRED NUMBERS
UNE-EN ISO 286-1:2011 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010)
BS ISO 16900-5 : 2016 RESPIRATORY PROTECTIVE DEVICES - METHODS OF TEST AND TEST EQUIPMENT - PART 5: BREATHING MACHINE, METABOLIC SIMULATOR, RPD HEADFORMS AND TORSO, TOOLS AND VERIFICATION TOOLS
INCITS/ISO/IEC 13923 : 1996 : R2007 INFORMATION TECHNOLOGY - 3,81 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DDS-2 FORMAT USING 120 M LENGTH TAPE
ECMA 246 : 2ED 98 8 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - AIT-1 FORMAT
I.S. EN 61076-4-111:2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRINTED BOARD CONNECTORS WITH ASSESSED QUALIFY - DETAIL SPECIFICATION FOR TWO-PART POWER CONNECTOR MODULES, FOR PRINTED BOARDS AND BACKPLANES HAVING EARLY MATING FEATURES, AND HAVING A BASIC GRID OF 2,5 MM IN ACCORDANCE WITH IEC 60917-1
SAE J 515 : 2015 SPECIFICATION FOR O-RING MATERIALS USED WITH HYDRAULIC CONNECTORS
STANAG 7106 : 2015 CHARACTERISTICS OF GASEOUS BREATHING OXYGEN, LIQUID BREATHING OXYGEN AND SUPPLY PRESSURES, HOSES AND REPLENISHMENT COUPLINGS
ECMA 150 : 2ED 92 3,81mm WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DDS-DC FORMAT USING 60m AND 90m LENGTH TAPES
ANSI INCITS 180 : 1990 : R2001 MAGNETIC TAPE AND CARTRIDGE FOR INFORMATION INTERCHANGE - 18-TRACK, PARALLEL, 1/2 INCH (12.65 MM), 37871 CPI (1491 CPMM), GROUP-CODED - REQUIREMENTS FOR RECORDING
ISO 10242-3:2008 Tools for pressing — Punch holder shanks — Part 3: Type D
BS EN 61076-2-101:2012 Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for M12 connectors with screw-locking
I.S. EN ISO 1179-1:2013 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 1: THREADED PORTS (ISO 1179-1:2013)
ISO 5171:2009 Gas welding equipment Pressure gauges used in welding, cutting and allied processes
ISO 6149-1:2006 Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 1: Ports with truncated housing for O-ring seal
UNI EN ISO 12625-11 : 2013 TISSUE PAPER AND TISSUE PRODUCTS - PART 11: DETERMINATION OF WET BALL BURST STRENGTH
DIN EN ISO 12625-11:2013-04 TISSUE PAPER AND TISSUE PRODUCTS - PART 11: DETERMINATION OF WET BALL BURST STRENGTH (ISO 12625-11:2012)
CEI EN 50343 : 2015 RAILWAY APPLICATIONS - ROLLING STOCK - RULES FOR INSTALLATION OF CABLING
EN ISO/IEC 10373 : 1995 IDENTIFICATION CARDS - TEST METHODS
I.S. EN 50243:2002 OUTDOOR BUSHINGS FOR 24 KV AND 36 KV AND FOR 5 KA AND 8 KA, FOR LIQUID FILLED TRANSFORMERS
UNI ISO 7465 : 2010 PASSENGER LIFTS AND SERVICE LIFTS - GUIDE RAILS FOR LIFT CARS AND COUNTERWEIGHTS - T-TYPE
ISO/ASTM 52901:2017 Additive manufacturing — General principles — Requirements for purchased AM parts
UNI EN ISO 2553 : 2014 WELDING AND ALLIED PROCESSES - SYMBOLIC REPRESENTATION ON DRAWINGS - WELDED JOINTS
SAE J 518/3 : 2015 HYDRAULIC FLANGE CLAMPS, 2-SCREW FLANGE CONNECTION TO BE USED WITH SAE J518-1, (CODE 61) CONNECTIONS WHERE ONLY LOW PRESSURE IS REQUIRED
IEC 60335-2-40 REDLINE : 6.0 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-40: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEAT PUMPS, AIR-CONDITIONERS AND DEHUMIDIFIERS
EN ISO 12625-11:2012 Tissue paper and tissue products - Part 11: Determination of wet ball burst strength (ISO 12625-11:2012)
UNE-EN 50299-2:2015 Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment Um from 72,5 kV to 550 kV - Part 2: Dry-type cable terminations
NF EN 61076 4 113 : 2005 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRINTED BOARD CONNECTORS - PART 4-113: DETAIL SPECIFICATION FOR TWO-PART CONNECTORS HAVING 5 ROWS WITH A GRID OF 2,54 MM FOR PRINTED BOARDS AND BACKPLANES IN BUS APPLICATIONS
NF EN 61076-2-105 : 2009 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-105: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR M5 CONNECTORS WITH SCREW-LOCKING
ISO 9181:2007 Tools for pressing Round punches with 60 degrees conical head and reduced shank
ISO/TR 17209:2013 Hydraulic fluid power Two-, three- and four-port screw-in cartridge valves Cavities with ISO 725 (UN and UNF) threads
ISO/IEC 23651:2003 Information technology 8 mm wide magnetic tape cartridge for information interchange Helical scan recording AIT-3 format
ISO 15218:2003 Pneumatic fluid power — 3/2 solenoid valves — Mounting interface surfaces
I.S. EN ISO 12085:1998 GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE - PROFILE METHOD - MOTIF PARAMETERS
EN 1426:2015 Bitumen and bituminous binders - Determination of needle penetration
IEC PAS 61076-3-126:2018 Connectors for electrical and electronic equipment - Product requirements - Part 3-126: Rectangular connectors - Detail specification for 5 pole power connector for industrial environments with push-pull locking
IEC PAS 61076-3-110:2002 Connectors for electronic equipment - Part 3-110: Detail specification for 8 way connectors for frequencies up to 600 MHz
ISO 11687-1:1995 Plain bearings Pedestal plain bearings Part 1: Pillow blocks
I.S. EN 856:2015 RUBBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL WIRE REINFORCED HYDRAULIC TYPE - SPECIFICATION
DIN EN ISO 20482 E : 2014 METALLIC MATERIALS - SHEET AND STRIP - ERICHSEN CUPPING TEST (ISO 20482:2013)
DIN EN 12890 : 2002-05 FOUNDING - PATTERNS, PATTERN EQUIPMENT AND COREBOXES FOR THE PRODUCTION OF SAND MOULDS AND SAND CORES
DIN EN 14350-1:2004-11 CHILD USE AND CARE ARTICLES - DRINKING EQUIPMENT - PART 1: GENERAL AND MECHANICAL REQUIREMENTS AND TESTS
DIN EN 15272-2:2007-06 Inland navigation vessels - Equipment for rope leading - Part 2: Fairlead; German version EN 15272-2:2007
DIN EN ISO 20482:2014-03 METALLIC MATERIALS - SHEET AND STRIP - ERICHSEN CUPPING TEST (ISO 20482:2013)
DIN EN 14372:2004-11 CHILD USE AND CARE ARTICLES - CUTLERY AND FEEDING UTENSILS - SAFETY REQUIREMENTS AND TESTS
DIN EN 15049:2007-12 Railway applications - Suspension components - Torsion bar, steel
DIN EN ISO 9312:2013-12 RESISTANCE WELDING EQUIPMENT - INSULATED PINS FOR USE IN ELECTRODE BACK-UPS (ISO 9312:2013)
BS EN 25827:1992 Specification for spot welding. Electrode back-ups and clamps
BS EN ISO 9974-1:2000 Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Threaded ports
BS EN ISO 20482:2013 Metallic materials. Sheet and strip. Erichsen cupping test
ISO 8430-2:2016 Resistance spot welding Electrode holders Part 2: Morse taper fixing
ISO 8062-3:2007 Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 3: General dimensional and geometrical tolerances and machining allowances for castings
BS EN ISO 9312:2013 Resistance welding equipment. Insulated pins for use in electrode back-ups
I.S. EN ISO 9013:2017 THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRICAL PRODUCT SPECIFICATION AND QUALITY TOLERANCES (ISO 9013:2017)
DIN EN ISO 6149-1:2007-05 CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 1: PORTS WITH TRUNCATED HOUSING FOR O-RING SEAL
I.S. EN ISO 15136-1:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS
I.S. EN ISO 9312:2013 RESISTANCE WELDING EQUIPMENT - INSULATED PINS FOR USE IN ELECTRODE BACK-UPS (ISO 9312:2013)
I.S. EN ISO 6873:2013 DENTISTRY - GYPSUM PRODUCTS (ISO 6873:2013)
DIN EN 22553:1997-03 WELDED, BRAZED AND SOLDERED JOINTS - SYMBOLIC REPRESENTATION ON DRAWINGS
I.S. EN 1426:2015 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION
I.S. EN 13083:2008 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - ADAPTOR FOR BOTTOM LOADING AND UNLOADING
I.S. EN 4560:2015 AEROSPACE SERIES - PIPE COUPLING 37 DEGREES, SPHERICAL, UP TO 21000 KPA - INCH SERIES - TECHNICAL SPECIFICATION
DIN ISO 16792:2008-12 TECHNICAL PRODUCT DOCUMENTATION - DIGITAL PRODUCT DEFINITION DATA PRACTICES
I.S. EN 13081:2008 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - VAPOUR COLLECTION ADAPTOR AND COUPLER
DIN EN 12890:2000-06 FOUNDING - PATTERNS, PATTERN EQUIPMENT AND CORE BOXES FOR THE PRODUCTION OF SAND MOULDS AND SAND CORES
I.S. EN 853:2015 RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED HYDRAULIC TYPE - SPECIFICATION
I.S. EN 857:2015 RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED COMPACT TYPE FOR HYDRAULIC APPLICATIONS - SPECIFICATION
EN 60603-7:2009/A1:2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS (IEC 60603-7:2008/A1:2011)
UNI EN ISO 12402-7 : 2011 PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS
I.S. EN ISO 20482:2013 METALLIC MATERIALS - SHEET AND STRIP - ERICHSEN CUPPING TEST (ISO 20482:2013)
I.S. EN 196-1:2016 METHODS OF TESTING CEMENT - PART 1: DETERMINATION OF STRENGTH
ONORM ISO 6005 : 2015 ALPINE SKIS - SKI BINDING SCREWS - TEST METHODS (ISO 6005:1991)
I.S. EN ISO 14744-6:2000 WELDING - ACCEPTANCE INSPECTION OF ELECTRON BEAM WELDING MACHINES - PART 6: MEASUREMENT OF STABILITY OF SPOT POSITION
BS 308-1:1984 Engineering drawing practice Recommendations for general principles
VDI 3357:2014-01 Sliding elements in large stamping dies
BS 308-2:1985 Engineering drawing practice Recommendations for dimensioning and tolerancing of size
BS 308-3:1990 Engineering drawing practice Recommendations for geometrical tolerancing
VDI 2736 Blatt 1:2016-07 Thermoplastic gear wheels - Materials, material selection, production methods, production tolerances, form design
PD 5500:2003 Specification for unfired fusion welded pressure vessels
VDI/VDE 2612 Blatt 5:2015-02 Measurement and testing of gearings - Surface roughness measurement of cylindrical gears and bevel gears by means of stylus-type instruments
BS 7011-2.2:1998 Consumable accessories for light microscopes. Slides Specification for materials and quality of finish
VDI 3387:2014-09 Heel guidings in large stamping and forming dies
ASME B46.1 : 2009 SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY)
VDI 3405 Blatt 2:2013-08 Additive manufacturing processes, rapid manufacturing - Beam melting of metallic parts - Qualification, quality assurance and post processing
OVE/ONORM EN 60603-7 : 2012 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS (IEC 60603-7:2008 + A1:2011)
BS CECC 22000:1993 Harmonized system of quality assessment for electronic components. Generic specification. Radio frequency coaxial connectors (Parts I, II and III)
BS 6615:1996 Specification for dimensional tolerances for metal and metal alloy castings
BS 7062:1988 Guide to construction and use of 12.7 mm (0.5 in) wide magnetic tape cartridges for data interchange, recording at 1491 data bytes per millimetre (37871 data bytes per inch), on 18 tracks
DIN 503:2004-09 Driving components - Flange bearings - Fastened with four screws
DIN 7080:2005-05 Pressure resistant circular sight glasses of borosilicate glass without limitation in the range of low temperature
15/30331399 DC : 0 BS EN 6096 - AEROSPACE SERIES - BEARINGS SPHERICAL PLAIN WITH SELF-LUBRICATING LINER EXTRA WIDE INNER RING IN CORROSION RESISTING STEEL - DIMENSIONS AND LOADS - INCH SERIES
11/30244521 DC : 0 BS EN 61076-3-100 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-110: DETAIL SPECIFICATION FOR SHIELDED, FREE AND FIXED CONNECTORS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 1000 MHZ
12/30242885 DC : 0 BS ISO 16839 - STEEL WIRE ROPES - DETERMINATION OF THE COMPLIANCE CHARACTERISTICS OF STEEL WIRE ROPES SUBJECTED TO LATERAL LOAD
DIN ISO 7368:1994-02 HYDRAULIC FLUID POWER - TWO-PORT SLIP-IN CARTRIDGE VALVES - CAVITIES
I.S. EN 61076-2-106:2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-106: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS M 16 X 0,75 WITH SCREW-LOCKING AND DEGREE OF PROTECTION IP40 OR IP65/67
I.S. EN ISO 12163:2000 DENTAL BASEPLATE/MODELLING WAX (ISO 12163:1999)
I.S. EN 61076-3-118:2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-118: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR A 4 POLE + PE POWER CONNECTOR WITH PUSH-PULL COUPLING
I.S. EN 60603-7-1:2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-1: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS
06/30150647 DC : DRAFT MAY 2006 BS EN ISO 5981 - RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF RESISTANCE TO COMBINED SHEAR FLEXING AND RUBBING
14/30310866 DC : 0 BS EN 4836 - AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREE CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING REDUCER- FLARED END - WITH EXTRA FINE THREAD PITCH - INCH SERIES
DIN EN ISO 8062-3 E : 2008 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS
15/30312477 DC : 0 BS ISO 10656 - RESISTANCE WELDING EQUIPMENT - TRANSFORMERS - INTEGRATED TRANSFORMERS FOR WELDING GUNS
09/30199060 DC : 0 BS ISO 11926-2 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 263 INCH THREADS AND O-RING SEALING - PART 2: HEAVY-DUTY (S SERIES) STUD ENDS
01/714275 DC : 0 ISO/DIS 1179-4 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B)
DIN ISO 10073:2010-05 Tools for moulding - Support pillars (ISO 10073:2008)
BS EN 16313:2013 Connections for heating and cooling appliances. Detachable connection with outside threaded pipe G ¾ A and inside cone
96/709826 DC : DRAFT JUL 1996 ISO/CD 6164-1 - HYDRAULIC FLUID POWER - ONE-PIECE SQUARE-FLANGE CONNECTORS - PART 1: FOUR-SCREW SQUARE-FLANGE CONNECTORS FOR USE AT PRESSURE OF 25MPA (250 BAR) TO 35 MPA (350 BAR), DN 10 TO DN 63
I.S. EN ISO 12625-11:2012 TISSUE PAPER AND TISSUE PRODUCTS - PART 11: DETERMINATION OF WET BALL BURST STRENGTH (ISO 12625-11:2012)
BS EN ISO 1938-2:2017 Geometrical product specifications (GPS). Dimensional measuring equipment Reference disk gauges
BS ISO 15407-1:2000 Pneumatic fluid power. Five-port directional control valves, sizes 18 mm and 26 mm Mounting interface surfaces without electrical connector
CEI EN 61076-2-107 : 2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-107: DETAIL SPECIFICATION FOR CIRCULAR HYBRID CONNECTORS M12 WITH ELECTRICAL AND FIBRE-OPTIC CONTACTS WITH SCREW LOCKING
BS ISO 10069-2:2008 Tools for pressing. Elastomer pressure springs Specification of accessories
14/30304022 DC : 0 BS ISO 7368 - HYDRAULIC FLUID POWER - TWO-PORT SLIP-IN CARTRIDGE VALVES - CAVITIES
CEI EN 61076-3-118 : 2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-118: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR A 4 POLE + PE POWER CONNECTOR WITH PUSH-PULL COUPLING
BS ISO 7200:1984 Technical drawing. Title blocks
06/30125744 DC : 0 EN 13081 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - VAPOUR COLLECTION ADAPTOR AND COUPLER
13/30269784 DC : 0 BS ISO/IEC 10373-2 - IDENTIFICATION CARDS - TEST METHODS - PART 2: CARDS WITH MAGNETIC STRIPES
14/30288036 DC : 0 BS ISO 13948-1 - DIESEL ENGINES - FUEL INJECTION PUMPS AND FUEL INJECTOR - PART 1: THREADED CONNECTIONS
ISO 484-1:2015 Shipbuilding — Ship screw propellers — Manufacturing tolerances — Part 1: Propellers of diameter greater than 2,50 m
BS ISO 13012-1:2009 Rolling bearings. Accessories for sleeve type linear ball bearings Boundary dimensions and tolerances for series 1 and 3
BS EN ISO 8430-1:2016 Resistance spot welding. Electrode holders Taper fixing 1:10
BS ISO 8017:2007 Tools for moulding. Guide pillars, straight and shouldered, and locating guide pillars, shouldered
10/30215350 DC : 0 BS ISO 16873 - HYDRAULIC FLUID POWER - PRESSURE SWITCHES - MOUNTING SURFACES
INCITS/ISO/IEC 18809 : 2000 : R2006 INFORMATION TECHNOLOGY - 8 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING AIT-1 WITH MIC FORMAT
04/30109558 DC : DRAFT FEB 2004 ISO 16000-10 - INDOOR AIR - PART 10: DETERMINATION OF THE EMISSION OF VOLATILE ORGANIC COMPOUNDS - EMISSION TEST CELL METHOD
DD IEC/PAS 61076-2-110:2010 Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for circular connectors M 12 x 1 with screw-locking, for high speed Ethernet and high speed data communication with frequencies up to 500 MHz and 10 gigabits/s
13/30213519 DC : 0 BS EN ISO 25178-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 1: INDICATION OF SURFACE TEXTURE
BS ISO 128-22:1999 Technical drawings. General principles of presentation Basic conventions and applications for leader lines and reference lines
04/30077768 DC : DRAFT FEB 2004 ISO 4401 - HYDRAULIC FLUID POWER - FOUR-PORT DIRECTIONAL CONTROL VALVES - MOUNTING SURFACES
BS EN 50299-2:2014 Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment Um from 72,5 kV to 550 kV Dry-type cable terminations
17/30338768 DC : 0 BS ISO 20929 - TOOLS FOR PRESSING - HEEL GUIDE PLATES IN LARGE STAMPING AND FORMING DIES
BS ISO 18084:2011 Press tools for tablets. Punches and dies
ECMA 209 : 1ED 94 DATA INTERCHANGE ON 12,7 MM 128-TRACK MAGNETIC TAPE CARTRIDGES - DLT3 FORMAT
10/30227785 DC : 0 BS EN 61076-2-109 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-109: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS M 12 X 1 WITH SCREW-LOCKING, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 500 MHZ
BS EN 61169-1:2013 Radio-frequency connectors Generic specification. General requirements and measuring methods
DIN EN ISO 8062-3:2008-09 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007)
CEI EN 61076-4-114 : 2004 CONNECTORS FOR ELECTRONIC EQUIPMENT PART 4-114: PRINTED BOARD CONNECTORS - DETAIL SPECIFICATION FOR TWO-PART CONNECTOR WITH INTEGRATED SHIELDING FUNCTION HAVING A GRID OF 1 MM X 1,5 MM
BS ISO 13565-2 : 1996 AMD 9950 GEOMETRIC PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - HEIGHT CHARACTERIZATION USING THE LINEAR MATERIAL RATIO CURVE
BS ISO 7790:2013 Hydraulic fluid power. Four-port modular stack valves and four-port directional control valves, sizes 02, 03, 05, 07, 08 and 10. Clamping dimensions
04/30124527 DC : DRAFT OCT 2004 ISO/DIS 6149-3 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 3: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR LIGHT-DUTY (L SERIES) STUD ENDS
BS ISO 6263:2013 Hydraulic fluid power. Compensated flow-control valves. Mounting surfaces
16/30333974 DC : 0 BS ISO 12251 - DIESEL ENGINES - CLAMP MOUNTED CR FUEL INJECTORS - MOUNTING DIMENSIONS
NF EN 60512-16-9 : 2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-9: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16I: GROUNDING CONTACT SPRING HOLDING FORCE
BS ISO/IEC 11319:1993 Information technology. 8 mm wide magnetic tape cartridge for information interchange. Helical scan recording
ECMA 182 : 1ED 92 DATA INTERCHANGE ON 12,7 MM 48-TRACK MAGNETIC TAPE CARTRIDGES - DLT1 FORMAT
BS ISO/IEC 10777:1991 Information technology. 3,81 mm wide magnetic tape cartridge for information interchange. Helical scan recording. DDS format
DIN EN ISO 1179-2:2014-03 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2013)
INCITS/ISO/IEC 15757 : 1998 INFORMATION TECHNOLOGY - DATA INTERCHANGE ON 8 MM WIDE MAGNETIC TAPE CARTRIDGE - HELICAL SCAN RECORDING - DA-2 FORMAT
04/30117476 DC : DRAFT JUL 2004 ISO 17775 - AIRCRAFT GROUND SERVICE INTERFACES - POTABLE WATER, TOILET FLUSH WATER AND TOILET DRAIN
NF ISO 16840-2 : 2018 WHEELCHAIR SEATING - PART 2: DETERMINATION OF PHYSICAL AND MECHANICAL CHARACTERISTICS OF SEAT CUSHIONS INTENDED TO MANAGE TISSUE INTEGRITY
UNE-EN ISO 17450-3:2017 Geometrical product specifications (GPS) - General concepts - Part 3: Toleranced features (ISO 17450-3:2016)
CEI EN 61076-4-108 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT PART 4-108: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY DETAIL SPECIFICATION FOR CABLE-TO-BOARD CONNECTORS, WITH A MODULAR PITCH OF 25 MM AND INTEGRATED SHIELDING FUNCTION, APPLICABLE FOR TRANSVERSE PACKING DENSITY OF 15 MM, HAVING A BASIC GRID OF 2,5 MM IN ACCORDANCE WITH IEC 60917-1
11/30247545 DC : 0 BS EN 16313 - CONNECTIONS FOR HEATING AND COOLING APPLIANCES - DETACHABLE CONNECTION WITH OUTSIDE THREADED PIPE G [3/4] A AND INSIDE CONE
DIN ISO 10069-2:2010-11 Tools for pressing - Elastomer pressure springs - Part 2: Specification of accessories (ISO 10069-2:2008)
BS ISO/ASTM 52901 : 2017 ADDITIVE MANUFACTURING - GENERAL PRINCIPLES - REQUIREMENTS FOR PURCHASED AM PARTS
02/702684 DC : DRAFT FEB 2002 PREN 14372 - CHILD USE AND CARE ARTICLES - CUTLERY AND FEEDING UTENSILS - SAFETY REQUIREMENTS AND TESTS
I.S. EN 61076-4-113:2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRINTED BOARD CONNECTORS - PART 4-113: DETAIL SPECIFICATION FOR TWO-PART CONNECTORS HAVING 5 ROWS WITH A GRID OF 2,54 MM FOR PRINTED BOARDS AND BACKPLANES IN BUS APPLICATIONS
CSA ISO/IEC 16382 :2004 INFORMATION TECHNOLOGY - DATA INTERCHANGE ON 12,7 MM 208-TRACK MAGNETIC TAPE CARTRIDGES - DLT 6 FORMAT
BS EN ISO 1179-2:2013 Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)
09/30199057 DC : 0 BS ISO 11926-1 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 263 UN AND UNF THREADS AND O-RING SEALING - PART 1: PORTS WITH TRUNCATED HOUSING FOR O-RING SEAL
05/30135263 DC : DRAFT JUN 2005 ISO 1179-4 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B)
BS EN 175301-801:2006 Detail specification. High density rectangular connectors, round removable crimp contacts
ANSI INCITS 334 : 2000 MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE, 0.50 IN (12.65 MM) SERIAL SERPENTINE 128-TRACK, 62500 BPI (2460 BPMM) DLT3XT FORMAT
ECMA 320 : 1ED 2001 DATA INTERCHANGE ON 12,7 MM - 448-TRACK MAGNETIC TAPE CARTRIDGES - SDLT1 FORMAT
BS EN ISO 17296-3:2016 Additive manufacturing. General principles Main characteristics and corresponding test methods
ANSI INCITS 242 : 1994 : R1999 INFORMATION SYSTEMS - MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - 0.50 IN (12.65 MM), SERIAL SERPENTINE, 48-TRACK, 42 500 BPI (1673 BPMM)
IEC 60335-2-40:2018 Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
BS ISO/IEC 13962:1995 Information technology. Data interchange on 12,7 mm, 112-track magnetic tape cartridges. DLT 2 format
BS EN 50243:2002 Outdoor bushings for 24 kV and 36 kV and for 5 kA and 8 kA, for liquid filled transformers
NF ISO 10110-8 : 2010 OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 8: SURFACE TEXTURE - ROUGHNESS AND WAVINESS
CLC/TS 61111:2006 Matting of insulating material for electrical purposes
BS EN ISO 8430-3:2016 Resistance spot welding. Electrode holders Parallel shank fixing for end thrust
ECMA 316 : 2ED 2001 8 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - VXA-1 FORMAT
BS EN 50343 : 2014 RAILWAY APPLICATIONS - ROLLING STOCK - RULES FOR INSTALLATION OF CABLING
15/30329002 DC : 0 BS ISO 18418-1 - GASOLINE ENGINES - MEDIUM PRESSURE LIQUID FUEL SUPPLY CONNECTIONS - PART 1: 60 DEGREES FEMALE CONE CONNECTORS
BS EN 61076-2-109:2014 Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for connectors with M 12 × 1 screw-locking, for data transmission frequencies up to 500 MHz
INCITS/ISO/IEC 15780 : 1998 : R2005 INFORMATION TECHNOLOGY - 8 MM WIDE MAGNETIC TAPE CARTRIDGE - HELICAL SCAN RECORDING - AIT-1 FORMAT
IEC PAS 60603-7-3:2004 Connectors for electronic equipment - Part 7-3: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz
UNI EN ISO 286-1 : 2010 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCES, DEVIATIONS AND FITS
INCITS/ISO/IEC 22051 : 2002 INFORMATION TECHNOLOGY - DATA INTERCHANGE ON 12,7 MM, 448-TRACK MAGNETIC TAPE CARTRIDGES - SDLT1 FORMAT
UNI EN ISO 1179-4 : 2008 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B)
BS 7823-3:1995 Pedestal plain bearings Specification for centre flange bearings
BS EN 61076-4-115:2003 Connectors for electronic equipment. Printed board connectors with assessed quality Backplane connector for InfiniBand equipment
CSA E60127.6 : 2003 : R2012 MINIATURE FUSES - PART 6: FUSE-HOLDERS FOR MINIATURE CARTRIDGE FUSE-LINKS
ISO 15407-2:2003 Pneumatic fluid power — Five-port directional control valves, sizes 18 mm and 26 mm — Part 2: Mounting interface surfaces with optional electrical connector
BS ISO 10907-1:2008 Tools for moulding. Locating rings Locating rings for mounting without thermal insulating sheets in small or medium moulds (types A and B)
CSA ISO/IEC 23651 : 2004 INFORMATION TECHNOLOGY - 8 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - AIT-3 FORMAT
15/30273275 DC : 0 BS ISO 18388 - TECHNICAL PRODUCT DOCUMENTATION (TPD) - RELIEF GROOVES - TYPES AND DIMENSIONING
DIN ISO 8775:1988-06 AEROSPACE - GASEOUS OXYGEN REPLENISHMENT CONNECTION FOR USE IN FLUID SYSTEMS (NEW TYPE) - DIMENSIONS (INCH SERIES)
ANSI INCITS 329 : 2000 INFORMATION TECHNOLOGY - MAGNETIC TAPE CARTRIDGE, 0.50 IN (12.65 MM), SERIAL SERPENTINE, 208-TRACK, 85 940 BPI (3383 BPMM), DLT 5 FORMAT
ANSI INCITS 329 : 2000 : R2015 INFORMATION TECHNOLOGY - MAGNETIC TAPE CARTRIDGE, 0.50 IN (12.65 MM), SERIAL SERPENTINE, 208-TRACK, 85 940 BPI (3383 BPMM), DLT 5 FORMAT
CSA ISO/IEC 18810:2004 INFORMATION TECHNOLOGY - 8 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING AIT-2 WITH MIC FORMAT
CAN/CSA-ISO/IEC 18810-04 (R2012) Information Technology - 8 mm Wide Magnetic Tape Cartridge for Information Interchange - Helical Scan Recording AIT-2 with MIC Format (Adopted ISO/IEC 18810:2001, first edition, 2001-02-01)
DIN EN ISO 12671 E : 2014 THERMAL SPRAYING - THERMALLY SPRAYED COATINGS - SYMBOLIC REPRESENTATION ON DRAWINGS (ISO 12671:2012)
INCITS/ISO/IEC 18810 : 2001 INFORMATION TECHNOLOGY - 8 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING AIT-2 WITH MIC FORMAT
NF EN 60603-7-3 : DEC 2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-3: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 100 MHZ
ECMA 292 : 1ED 99 8 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING AIT-2 WITH MIC FORMAT
I.S. EN 16313:2013 CONNECTIONS FOR HEATING AND COOLING APPLIANCES - DETACHABLE CONNECTION WITH OUTSIDE THREADED PIPE G 3/4 A AND INSIDE CONE
BS ISO 7368:2016 Hydraulic fluid power. Two-port slip-in cartridge valves. Cavities
IEC PAS 61076-3-104:2002 Connectors for electronic equipment - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors, for data transmissions with frequencies up to 600 MHz minimum
EN IEC 61076-2-111:2018 Connectors for electrical and electronic equipment - Product requirements - Part 2-111: Circular connectors - Detail specification for power connectors with M12 screw-locking
IEC PAS 61076-2-114:2016 Connectors for electronic equipment - Product requirements - Part 2-114: Circular connectors - Detail specification for data and power connectors with M8 screw-locking
BS ISO 13012-2:2009 Rolling bearings. Accessories for sleeve type linear ball bearings Boundary dimensions and tolerances for series 5
ANSI INCITS 197 : 1991 : R2002 INFORMATION SYSTEMS - UNRECORDED MAGNETIC TAPE AND CARTRIDGE FOR INFORMATION INTERCHANGE 1/2 IN (12.65 MM), SERIAL SERPENTINE, 22-TRACK, 6667 FTPI (262 FTPMM) AND 48-TRACK, 10,000 FTPI (394 FTPMM)
CEI EN 61076-1 : 2007 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 1: GENERIC SPECIFICATION
I.S. CLC/TS 61111:2006 MATTING OF INSULATING MATERIAL FOR ELECTRICAL PURPOSES
I.S. EN 60512-16-9:2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-9: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16I: GROUNDING CONTACT SPRING HOLDING FORCE
S.R. CEN ISO/TS 8062-2:2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013, CORRECTED VERSION 2013-11-01)
I.S. EN 61076-2-109:2014 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-109: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS WITH M 12 X 1 SCREW-LOCKING, FOR DATA TRANSMISSION FREQUENCIES UP TO 500 MHZ
I.S. EN 62282-6-300:2013 FUEL CELL TECHNOLOGIES - PART 6-300: MICRO FUEL CELL POWER SYSTEMS - FUEL CARTRIDGE INTERCHANGEABILITY (IEC 62282-6-300:2012 (EQV))
I.S. EN ISO 8015:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES
I.S. EN 61076-5:2002 CONNECTORS FOR USE IN D.C., LOW-FREQUENCY ANALOGUE AND DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 5: IN-LINE SOCKETS WITH ASSESSED QUALITY - SECTIONAL SPECIFICATION
ISO 679:2009 Cement Test methods Determination of strength
ISO/IEC 18810:2001 Information technology 8 mm wide magnetic tape cartridge for information interchange Helical scan recording AIT-2 with MIC format
UNE-EN ISO 8015:2012 Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011)
ECMA 197 : 1ED 93 DATA INTERCHANGE ON 12,7 MM 112-TRACK MAGNETIC TAPE CARTRIDGES - DLT2 FORMAT
I.S. EN 175301-801:2006 DETAIL SPECIFICATION: HIGH DENSITY RECTANGULAR CONNECTORS, ROUND REMOVABLE CRIMP CONTACTS
UNE-EN ISO 12671:2014 Thermal spraying - Thermally sprayed coatings - Symbolic representation on drawings (ISO 12671:2012)
ISO/IEC 18809:2000 Information technology 8 mm wide magnetic tape cartridge for information interchange Helical scan recording AIT-1 with MIC format
CEI EN 50299-1 : 2016 OIL-IMMERSED CABLE CONNECTION ASSEMBLIES FOR TRANSFORMERS AND REACTORS HAVING HIGHEST VOLTAGE FOR EQUIPMENT UM FROM 72,5 KV TO 550 KV - PART 1: FLUID-FILLED CABLE TERMINATIONS
ISO 10242-2:2008 Tools for pressing — Punch holder shanks — Part 2: Type C
ISO 286-1:2010 Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits
ISO 6164:1994 Hydraulic fluid power Four-screw, one-piece square-flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar)
SAE J 1502 : 2013 CONNECTIONS FOR FLUID POWER AND GENERAL USE - HYDRAULIC COUPLINGS - DIAGNOSTIC
SAE J 518/2 : 2017 HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, 4-SCREW FLANGE CONNECTION - PART 2: 42 MPA (CODE 62)
ASTM F 3018 : 2017 Standard Guide for Assessment of Hard-on-Hard Articulation Total Hip Replacement and Hip Resurfacing Arthroplasty Devices
UNI EN ISO 1179-3 : 2008 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H)
CEI EN 61076-2-105 : 2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-105: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR M5 CONNECTORS WITH SCREW-LOCKING
ISO 8693:2011 Tools for moulding Flat ejector pins
NF ISO 5829 : 2011 RESISTANCE SPOT WELDING - ELECTRODE ADAPTORS, FEMALE TAPER 1:10
EN ISO 6149-1:2007 Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring seal (ISO 6149-1:2007)
ISO/IEC 15780:1998 Information technology 8 mm wide magnetic tape cartridge Helical scan recording AIT-1 format
ISO 15407-1:2000 Pneumatic fluid power — Five-port directional control valves, sizes 18 mm and 26 mm — Part 1: Mounting interface surfaces without electrical connector
ISO 5597:2010 Hydraulic fluid power Cylinders Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications
I.S. EN 61076-3-104:2017 CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-104: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED FREE AND FIXED CONNECTORS FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 2000 MHZ
ISO 1103:2007 Road vehicles — Coupling balls for caravans and light trailers — Dimensions
ISO 7368:2016 Hydraulic fluid power — Two-port slip-in cartridge valves — Cavities
ISO 15786:2008 Technical drawings — Simplified representation and dimensioning of holes
ISO/IEC 22051:2002 Information technology Data interchange on 12,7 mm, 448-track magnetic tape cartridges SDLT1 format
ISO 6621-2:2003 Internal combustion engines Piston rings Part 2: Inspection measuring principles
ISO 10303-214:2010 Industrial automation systems and integration Product data representation and exchange Part 214: Application protocol: Core data for automotive mechanical design processes
ISO/IEC 11319:1993 Information technology 8 mm wide magnetic tape cartridge for information interchange Helical scan recording
IEC PAS 61076-3-109:2001 Connectors for electronic equipment - Part 3-109: Detail specification for two-part cable to board connector for high speed data application in a harsh industrial environment - Protection rate IP67 according to IEC 60529
ISO 4379:1993 Plain bearings Copper alloy bushes
IEC 61076-3-104:2017 Connectors for electrical and electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz
IEC 61076-4-110:2001 Connectors for electronic equipment - Part 4-110: Printed board connectors with assessed quality - Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function
ISO/IEC 15896:1999 Information technology Data interchange on 12,7 mm 208-track magnetic tape cartridges DLT 5 format
ISO 13948-1:2015 Diesel engines Fuel injection pumps and fuel injector low-pressure connections Part 1: Threaded connections
ISO 5781:2016 Hydraulic fluid power Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves Mounting surfaces
ISO 9271:1992 Decontamination of radioactively contaminated surfaces — Testing of decontamination agents for textiles
I.S. CWA 14249:2003 REVISED FUNSTEP APPLICATION REFERENCE MODEL
ISO 10907-1:2008 Tools for moulding — Locating rings — Part 1: Locating rings for mounting without thermal insulating sheets in small or medium moulds (types A and B)
ISO 10069-1:2008 Tools for pressing — Elastomer pressure springs — Part 1: General specification
DIN EN ISO 9013 E : 2003 THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRICAL PRODUCT SPECIFICATION AND QUALITY TOLERANCES (ISO 9013:2017)
DIN EN ISO 6873:2013-07 DENTISTRY - GYPSUM PRODUCTS (ISO 6873:2013)
DIN EN 1426:2015-09 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION
DIN EN 13083:2013-08 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - ADAPTOR FOR BOTTOM LOADING AND UNLOADING
DIN EN ISO 14744-6:2000-07 WELDING - ACCEPTANCE INSPECTION OF ELECTRON BEAM WELDING MACHINES - PART 6: MEASUREMENT OF STABILITY OF SPOT POSITION
DIN EN ISO 4288:1998-04 GPS - Surface texture: Profile method - Rules and procedures for the assessment of surface texture (ISO 4288:1996)
DIN EN 14882 E : 2005 RUBBER OR PLASTIC COATED FABRICS - DETERMINATION OF THE STATIC AND DYNAMIC COEFFICIENT OF FRICTION
DIN EN ISO 9013:2003-07 THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRICAL PRODUCT SPECIFICATION AND QUALITY TOLERANCES (ISO 9013:2017)
DIN EN ISO 19054:2006-09 RAIL SYSTEMS FOR SUPPORTING MEDICAL EQUIPMENT (ISO 19054:2005 + AMD1:2016)
UNE-EN ISO 9013:2017 Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2017)
IEC 61076-4-113:2002 Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications
BS EN ISO 9974-3:2000 Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Stud ends with metal-to-metal sealing (type B)
ISO 10135:2007 Geometrical product specifications (GPS) — Drawing indications for moulded parts in technical product documentation (TPD)
IEC 60603-7:2008+AMD1:2011 CSV Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors
UNE-EN 1426:2015 Bitumen and bituminous binders - Determination of needle penetration
BS EN 853:2015 Rubber hoses and hose assemblies. Wire braid reinforced hydraulic type. Specification
IEC 61169-1:2013 Radio frequency connectors - Part 1: Generic specification - General requirements and measuring methods
BS EN ISO 14660-2:2000 Geometrical product specifications (GPS). Geometrical features Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature
IEC 62282-6-300:2012 Fuel cell technologies - Part 6-300: Micro fuel cell power systems - Fuel cartridge interchangeability
UNE-EN 853:2015 Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification
IEC 60603-7-1:2011 Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors
DIN EN ISO 9312 E : 2013 RESISTANCE WELDING EQUIPMENT - INSULATED PINS FOR USE IN ELECTRODE BACK-UPS (ISO 9312:2013)
BS EN 837-1:1998 Pressure gauges Bourdon tube pressure gauges. Dimensions, metrology, requirements and testing
I.S. EN ISO 12402-7:2006 PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS
EN 837-1:1996/AC:1998 PRESSURE GAUGES - BOURDON TUBE PRESSURE GAUGES - DIMENSIONS, METROLOGY, REQUIREMENTS AND TESTING
I.S. EN 837-1:1997 PRESSURE GAUGES - PART 1: BOURDON TUBE PRESSURE GAUGES - DIMENSIONS, METROLOGY, REQUIREMENTS AND TESTING
DIN EN 856:2016-09 RUBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL WIRE REINFORCED HYDRAULIC TYPE - SPECIFICATION
EN ISO 12402-7:2006/A1:2011 PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS
EN ISO 6149-3:2007 Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends (ISO 6149-3:2006)
UNI EN ISO 9312 : 2013 RESISTANCE WELDING EQUIPMENT - INSULATED PINS FOR USE IN ELECTRODE BACK-UPS
UNI EN 13083 : 2013 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - ADAPTOR FOR BOTTOM LOADING AND UNLOADING
UNI EN ISO 6873 : 2013 DENTISTRY - GYPSUM PRODUCTS
UNI EN ISO 20482 : 2014 METALLIC MATERIALS - SHEET AND STRIP - ERICHSEN CUPPING TEST
UNI EN 16313 : 2013 CONNECTIONS FOR HEATING AND COOLING APPLIANCES - DETACHABLE CONNECTION WITH OUTSIDE THREADED PIPE G 3/4 A AND INSIDE CONE
UNI EN 13081 : 2012 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - VAPOUR COLLECTION ADAPTOR AND COUPLER
DIN ISO 10242-3:2010-11 Tools for pressing - Punch holder shanks - Part 3: Type D (ISO 10242-3:2008)
ISO 6263:2013 Hydraulic fluid power — Compensated flow-control valves — Mounting surfaces
DIN 65035:1993-11 AEROSPACE; STEEL, NICKEL- AND COBALT-ALLOY STOCK, FORGINGS AND RINGS; TECHNICAL SPECIFICATION
BS ISO 16839:2013 Steel wire ropes. Determination of the transverse rigidity of steel wire ropes under no axial load condition
DIN 28120:2004-06 Circular sight glasses with case in main power connection
BS EN 3155-001:2009 Aerospace series. Electrical contacts used in elements of connection Technical specification
DIN EN ISO-IEC 10373 : 1995 IDENTIFICATION CARDS; TEST METHODS
ISO 16900-5:2016 Respiratory protective devices Methods of test and test equipment Part 5: Breathing machine, metabolic simulator, RPD headforms and torso, tools and verification tools
DIN ISO 9183-2 E : 2012 TOOLS FOR PRESSING - WEAR PLATES FOR PRESS DIES - PART 2: TYPE B (ISO 9183-2:2011)
02/206148 DC : 0 IEC 60603-7-5. ED. 1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-5: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 250 MHZ (CAT 6, SHIELDED)
CEI EN 61076-2-113 : 1ED 2017 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-113: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS WITH M12 SCREW LOCKING WITH POWER AND SIGNAL CONTACTS FOR DATA TRANSMISSION WITH FREQUENCY UP TO 100 MHZ
ISO/IEC 15718:1998 Information technology Data interchange on 8 mm wide magnetic tape cartridge Helical scan recording HH-1 format
99/702254 DC : DRAFT JAN 1999 ISO/DIS 7465 - PASSENGER LIFTS AND SERVICE LIFTS - GUIDE RAILS FOR LIFTS AND COUNTERWEIGHTS - T-TYPE
PD ISO/TS 16840-12:2015 Wheelchair seating Apparatus and method for cushion envelopment testing
ANSI INCITS 345 : 2001 : R2006 MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE, 0.50 IN (12.65 MM), SERIAL SERPENTINE, 208-TRACK, 98214 BPI (3866 BPMM) DLT6 FORMAT
ANSI INCITS 265 : 1995 : R2006 INFORMATION TECHNOLOGY - MAGNETIC TAPE AND CARTRIDGE FOR INFORMATION INTERCHANGE - UNRECORDED, 36-TRACK, PARALLEL, 12.57 MM (0.495 IN), 1944 FTPMM (49378 FTPI) GROUP-CODED RECORDING
17/30340059 DC : 0 BS EN 61076-3-119 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-119: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR UNSHIELDED, FREE AND FIXED 10 WAY CONNECTORS WITH PUSH-PULL COUPLING FOR INDUSTRIAL ENVIRONMENTS WITH FREQUENCIES UP TO 100 MHZ
14/30261577 DC : 0 BS EN ISO 9013 - THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRICAL PRODUCT SPECIFICATION AND QUALITY TOLERANCES
BS EN ISO 286-1:2010 Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes Basis of tolerances, deviations and fits
NF EN 60603-7 : 2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS
ISO 17775:2006 Aircraft — Ground-service connections — Potable water, toilet-flush water and toilet drain
DIN ISO 18084:2012-08 Press tools for tablets - Punches and dies (ISO 18084:2011)
DIN SPEC 91184 E : 2014 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013)
BS EN 61076-2-107:2010 Connectors for electronic equipment. Product requirements Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw locking
BS ISO 5597:2010 Hydraulic fluid power. Cylinders. Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications
API 11D2 : 2010 PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PUMPS
I.S. EN ISO 2553:2013 WELDING AND ALLIED PROCESSES - SYMBOLIC REPRESENTATION ON DRAWINGS - WELDED JOINTS (ISO 2553:2013)
I.S. EN 562:2003 GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES
IEC 61076-2-113:2017 Connectors for electronic equipment - Product requirements - Part 2-113: Circular connectors - Detail specification for connectors with M12 screw locking with power and signal contacts for data transmission with frequency up to 100 MHz
BS ISO/IEC 10373-2:2015 Identification cards. Test methods Cards with magnetic stripes
UNI CEN ISO/TS 8062-2 : 2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES
BS ISO/TR 10064-4:1998 Code of inspection practice Recommendations relative to surface texture and tooth contact pattern checking
BS EN 61076-4-111:2002 Connectors for electronic equipment. Printed board connectors with assessed quality Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm in accordance with IEC 60917-1
05/30127945 DC : DRAFT JAN 2005 ISO/IEC 10373-2 - IDENTIFICATION CARDS - TEST METHODS - PART 2: CARDS WITH MAGNETIC STRIPES
BS ISO 1103:2007 Road vehicles. Coupling balls for caravans and light trailers. Dimensions
12/30235292 DC : 0 BS EN 50343 - RAILWAY APPLICATIONS - ROLLING STOCK - RULES FOR INSTALLATION OF CABLING
DIN 7647:1995-08 Compression couplings with spherical liner - Male stud compression couplings
BS EN ISO 2553:2013 Welding and allied processes. Symbolic representation on drawings. Welded joints
BS ISO 6149-1:1993 Connections for fluid power and general use. Ports and stud ends with ISO 261 threads and O-ring sealing Ports with O-ring in truncated housing
DD IEC PAS 61076-2-107 : DRAFT 2007 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-107: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CIRCULAR HYBRID CONNECTORS M12 WITH ELECTRICAL AND FIBRE-OPTIC CONTACTS WITH SCREW-LOCKING
SAE J 2337-2 : 2017 CONNECTIONS FOR FLUID POWER AND HIGH PRESSURE USE - PORTS, STUD ENDS, AND PLUGS WITH ISO 261 THREADS AND O-RING SEALING - PART 2: STUD END REQUIREMENTS, DIMENSIONS, DESIGN, AND TEST METHODS
14/30297577 DC : 0 BS EN 61076-2-113 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-113: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS WITH DATA AND POWER CONTACTS WITH M12 SCREW-LOCKING
BS EN ISO 8015:2011 Geometrical product specifications (GPS). Fundamentals. Concepts, principles and rules
ISO 2974:2018 Diesel engines — 60° female cones for high-pressure fuel injection components
04/30124525 DC : DRAFT OCT 2004 ISO/DIS 6149-2 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 2: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR HEAVY-DUTY (S SERIES) STUD ENDS
10/30202369 DC : 0 BS ISO 13948-2 - DIESEL ENGINES - FUEL INJECTION PUMPS AND FUEL INJECTOR LOW-PRESSURE CONNECTIONS - PART 2: NON-THREADED (PUSH-ON) CONNECTIONS
BS EN 50299-1:2014 Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment Um from 72,5 kV to 550 kV Fluid-filled cable terminations
12/30259014 DC : 0 BS EN 60127-6 - MINIATURE FUSES - PART 6: FUSE-HOLDERS FOR MINIATURE FUSE-LINKS
12/30230676 DC : 0 BS EN ISO 16792 - TECHNICAL PRODUCT DOCUMENTATION - DIGITAL PRODUCT DEFINITION DATA PRACTICES
ISO/IEC 13421:1993 Information technology Data Interchange on 12,7 mm, 48-track magnetic tape cartridges DLT 1 format
ISO/IEC 13923:1996 Information technology 3,81 mm wide magnetic tape cartridge for information interchange Helical scan recording DDS-2 format using 120 m length tape
I.S. EN ISO 286-1:2010/AC:2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCES, DEVIATIONS AND FITS (ISO 286-1:2010)
UNE-EN ISO 25178-1:2016 Geometrical product specifications (GPS) - Surface texture: Areal - Part 1: Indication of surface texture (ISO 25178-1:2016)
UNE-EN 50299-1:2015 Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment Um from 72,5 kV to 550 kV - Part 1: Fluid-filled cable terminations
I.S. EN 61076-2-101:2012 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-101: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR M12 CONNECTORS WITH SCREW-LOCKING (IEC 61076-2-101:2012 (EQV))
I.S. EN 1400:2013 CHILD USE AND CARE ARTICLES - SOOTHERS FOR BABIES AND YOUNG CHILDREN - SAFETY REQUIREMENTS AND TEST METHODS
96/709929 DC : DRAFT JUL 1996 ISO/CD 7368 - HYDRAULIC FLUID POWER - TWO-PORT SLIP-IN CARTRIDGE VALVES - CAVATIES
INCITS/ISO/IEC 17462 : 2000 INFORMATION TECHNOLOGY - 3,81 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DDS-4 FORMAT
13/30268325 DC : 0 BS EN 61076-2-112 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 2-112: PRODUCT REQUIREMENTS - CIRCULAR CONNECTORS, DETAIL SPECIFICATION FOR M12 POWER CONNECTORS UP TO 12 AMPS WITH SCREW-LOCKING
BS 5681:1979 Specification for taper pins, unhardened - metric series
UNI EN ISO 286-2 : 2010 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS
ISO/IEC 13962:1995 Information technology Data interchange on 12,7 mm, 112-track magnetic tape cartridges DLT 2 format
CAN/CSA-ISO/IEC 22051-04 (R2012) Information Technology - Data Interchange on 12,7 mm, 448-Track Magnetic Tape Cartridges - SDLT1 Format (Adopted ISO/IEC 22051:2002, first edition, 2002-10-01)
PD ISO/TR 17209:2013 Hydraulic fluid power. Two-, three-and four-port screw-in cartridge valves. Cavities with ISO 725 (UN and UNF) threads
BS ISO/IEC 12248:1993 Information technology. 3,81 mm wide magnetic tape cartridge for information interchange. Helical scan recording. DATA/DAT-DC format using 60 m and 90 m length tapes
01/714273 DC : 0 ISO/DIS 1179-2 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS WITH ELASTOMERIC SEALING (TYPE E)
DIN EN 16313:2013-08 Connections for heating and cooling appliances - Detachable connection with outside threaded pipe G 3/4 A and inside cone
04/30125936 DC : DRAFT NOV 2004 ISO 10135 - TECHNICAL PRODUCT DOCUMENTATION (TPD) - DRAWING INDICATIONS FOR MOULDED PARTS
EN IEC 61076-3-119:2018 Connectors for electrical and electronic equipment - Product requirements - Part 3-119: Rectangular connectors - Detail specification for shielded and unshielded, free and fixed 10-way connectors with push-pull coupling for industrial environments for data transmission with frequencies up to 100 MHz
03/306714 DC : DRAFT APR 2003 EN 14665 - THERMAL SPRAYING - THERMAL SPRAYED COATINGS - SYMBOLIC REPRESENTATION ON DRAWINGS
BS HD 60269-3 : 2010 LOW-VOLTAGE FUSES - PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO F
BS EN 60512-16-5:2008 Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts and terminations. Test 16e. Gauge retention force (resilient contacts)
BS EN ISO 8430-2:2016 Resistance spot welding. Electrode holders Morse taper fixing
DIN ISO 15786 E : 2014 TECHNICAL DRAWINGS - SIMPLIFIED REPRESENTATION AND DIMENSIONING OF HOLES (ISO 15786:2008)
BS ISO/IEC 13421:1993 Information technology. Data interchange on 12,7 mm, 48-track magnetic tape cartridges. DLT 1 format
BS ISO 6264:1998 Hydraulic fluid power. Pressure-relief valves. Mounting surfaces
15/30284673 DC : 0 BS EN ISO 17450-4 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - BASIC CONCEPTS - PART 4: GEOMETRICAL CHARACTERISTICS FOR QUANTIFYING FORM, ORIENTATION LOCATION AND RUN-OUT DEVIATION
BS EN 61076-4-110:2002 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function
BS ISO 6162-1:2012 Hydraulic fluid power. Flange connections with split or one-piece flange clamps and metric or inch screws Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
08/30163094 DC : DRAFT FEB 2008 BS EN ISO 286-2 AMD1 - ISO SYSTEM OF LIMITS AND FITS - PART 2: TABLES OF STANDARD TOLERANCE GRADES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS
BS ISO 10242-3:2008 Tools for pressing. Punch holder shanks Type D
DD ENV 1375-1:1994 Identification card systems. Intersector integrated circuit(s) card additional formats ID-000 card size and physical characteristics
NF EN 60603-7-4 : 2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-4: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 250 MHZ
BS EN 61076-4-108:2002 Connectors for electronic equipment. Printed board connectors with assessed quality Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1
BS ISO 6149-2:1993 Connections for fluid power and general use. Ports and stud ends with ISO 261 threads and O-ring sealing Heavy-duty (S series) stud ends. Dimensions, design, test methods and requirements.
BS EN 60603-7-5:2010 Connectors for electronic equipment Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz
BIS IS/ISO 6621-2 : 2003(R2014) INTERNAL COMBUSTION ENGINES - PISTON RINGS - PART 2: INSPECTION MEASURING PRINCIPLES
CSA ISO/IEC 17462 :2004 INFORMATION TECHNOLOGY - 3,81 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DDS-4 FORMAT
ANSI INCITS 328 : 2000 : R2005 INFORMATION TECHNOLOGY - 19 MM DD-2 HELICAL SCAN DIGITAL COMPUTER TAPE CASSETTE FOR INFORMATION INTERCHANGE
03/100336 DC : DRAFT MAR 2003 IEC 60603-7-7 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-7: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 600 MHZ
PREN 2605 : DRAFT 87 AEROSPACE SERIES - STRAIGHT METRIC-SIZE UNIONS WITH LOCKING RING - 24 DEGREES UNION INTERFACE - DIMENSIONS
BS ISO 6195:2013 Fluid power systems and components. Cylinder-rod wiper-ring housings in reciprocating applications. Dimensions and tolerances
SAE J 518/1 : 2013 HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, 4-SCREW FLANGE CONNECTION - PART 1: 3.5 MPA TO 35 MPA (CODE 61)
XP PREN 3155-001 : 1993 XP AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 001: TECHNICAL SPECIFICATION
03/100165 DC : DRAFT JAN 2003 IEC 60603-7-2 ED.1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-2: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 100 MHZ
BS ISO 16792:2006 Technical product documentation. Digital product definition data practices
BS ISO 10242-2:2008 Tools for pressing. Punch holder shanks Type C
INCITS/ISO/IEC 23651 : 2003 INFORMATION TECHNOLOGY - 8 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - AIT-3 FORMAT
UNE-EN ISO 12625-11:2013 Tissue paper and tissue products - Part 11: Determination of wet ball burst strength (ISO 12625-11:2012)
BS ISO 10242-1:2011 Tools for pressing. Punch holder shanks Type A
BS A 328-2:1999 Accessory drives and mounting flanges (Metric sizes) Dimensions
DIN ISO 13012-1:2010-02 Rolling bearings - Accessories for sleeve type linear ball bearings - Part 1: Boundary dimensions and tolerances for series 1 and 3 (ISO 13012-1:2009)
CAN/CSA-ISO/IEC 17462-04 (R2014) Information Technology - 3,81 mm Wide Magnetic Tape Cartridge for Information Interchange - Helical Scan Recording - DDS-4 Format (Adopted ISO/IEC 17462:2000, first edition, 2000-09-15)
ANSI INCITS 267 : 1996 : R2001 INFORMATION TECHNOLOGY - HELICAL-SCAN DIGITAL COMPUTER TAPE CARTRIDGE, 12.65 MM (0.498 IN), FOR INFORMATION INTERCHANGE
INCITS/ISO/IEC 20062 : 2001 INFORMATION TECHNOLOGY - 8 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - VXA-1 FORMAT
CAN/CSA-ISO/IEC 18836-04 (R2012) Information Technology - 8 mm Wide Magnetic Tape Cartridge for Information Interchange - Helical Scan Recording - Mammoth Tape-2 Format (Adopted ISO/IEC 18836:2001, first edition, 2001-02-15)
SAE J 2337-3 : 2017 CONNECTIONS FOR FLUID POWER AND HIGH PRESSURE USE - PORTS, STUD ENDS, AND PLUGS WITH ISO 261 THREADS AND O-RING SEALING - PART 3: PORT PLUG REQUIREMENTS, DIMENSIONS, DESIGN, AND TEST METHODS
AWS C4.6M:2006(R2012) THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRIC PRODUCT SPECIFICATION AND QUALITY TOLERANCES
STANAG 3296 : 0 AIRCRAFT GASEOUS OXYGEN REPLENISHMENT COUPLINGS
API 7CW : 2015 CASING WEAR TESTS
SAE J 2337-1 : 2014 CONNECTIONS FOR FLUID POWER AND HIGH PRESSURE USE - PORTS, STUD ENDS, AND PLUGS WITH ISO 261 THREADS AND O-RING SEALING - PART 1: PORTS WITH RECESSED CONICAL SEAT REQUIREMENTS, DIMENSIONS, DESIGN, AND TEST METHODS
ARINC 628-6 : 2002 CABIN EQUIPMENT INTERFACES - PART 6: FIBER OPTIC CABLE ASSEMBLY GENERAL SPECIFICATION
I.S. EN 16701:2014 ENERGETIC MATERIALS FOR DEFENCE - SAFETY, VULNERABILITY - FRIABILITY
I.S. EN 50299-2:2014 OIL-IMMERSED CABLE CONNECTION ASSEMBLIES FOR TRANSFORMERS AND REACTORS HAVING HIGHEST VOLTAGE FOR EQUIPMENT UM FROM 72,5 KV TO 550 KV - PART 2: DRY-TYPE CABLE TERMINATIONS
I.S. EN 3155-001:2016 AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 001: TECHNICAL SPECIFICATION
I.S. EN ISO 5171:2010 GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES
ISO 8062-4:2017 Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 4: General tolerances for castings using profile tolerancing in a general datum system
I.S. EN 60603-7:2009 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS (IEC 60603-7:2008)
NF EN 60512-16-5 : 2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-5: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16E: GAUGE RETENTION FORCE (RESILIENT CONTACTS)
I.S. EN 61076-2-104:2014 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-104: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CIRCULAR CONNECTORS WITH M8 SCREW-LOCKING OR SNAP-LOCKING
I.S. EN 60127-6:2014 MINIATURE FUSES - PART 6: FUSE-HOLDERS FOR MINIATURE FUSE-LINKS
I.S. EN 61076-4-110:2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-110: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR LATCHED CABLE CONNECTOR SYSTEM HAVING A BASIC GRID OF 2,0 MM INCLUDING FULL SHIELDING AND LATCHING FUNCTION
I.S. EN ISO 8062-3:2007 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS
BS ISO/IEC 18745-1:2014 Information technology. Test methods for machine readable travel documents (MRTD) and associated devices Physical test methods for passport books (durability)
I.S. EN ISO 8430-2:2016 RESISTANCE SPOT WELDING - ELECTRODE HOLDERS - PART 2: MORSE TAPER FIXING (ISO 8430-2:2016)
DIN EN ISO 286-2:2010-11 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS
I.S. EN 61076-1:2006&A1:2019 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 1: GENERIC SPECIFICATION
ISO/IEC 15521:1998 Information technology 3,81 mm wide magnetic tape cartridge for information interchange Helical scan recording DDS-3 format using 125 m length tapes
DIN EN 1400:2014-07 CHILD USE AND CARE ARTICLES - SOOTHERS FOR BABIES AND YOUNG CHILDREN - SAFETY REQUIREMENTS AND TEST METHODS
ISO 10648-1:1997 Containment enclosures — Part 1: Design principles
BS EN ISO 5171:2010 Gas welding equipment. Pressure gauges used in welding, cutting and allied processes
UNE-EN ISO 1179-2:2014 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2013)
ISO/IEC 10373-1:2006 Identification cards Test methods Part 1: General characteristics
ISO 286-2:2010 Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
ISO 5599-2:2001 Pneumatic fluid power — Five-port directional control valves — Part 2: Mounting interface surfaces with optional electrical connector
EN ISO 2553:2013 Welding and allied processes - Symbolic representation on drawings - Welded joints (ISO 2553:2013)
ISO/IEC 18745-1:2014 Information technology Test methods for machine readable travel documents (MRTD) and associated devices Part 1: Physical test methods for passport books (durability)
ISO/IEC 11557:1992 Information technology 3,81 mm wide magnetic tape cartridge for information interchange Helical scan recording DDS-DC format using 60 m and 90 m length tapes
ISO 9449:2007 Tools for moulding Centring sleeves
ISO 10656:2016 Resistance welding equipment Transformers Integrated transformers for welding guns
I.S. EN 50343:2014 RAILWAY APPLICATIONS - ROLLING STOCK - RULES FOR INSTALLATION OF CABLING
ISO 16840-2:2018 Wheelchair seating — Part 2: Determination of physical and mechanical characteristics of seat cushions intended to manage tissue integrity
ISO 7790:2013 Hydraulic fluid power — Four-port modular stack valves and four-port directional control valves, sizes 02, 03, 05, 07, 08 and 10 — Clamping dimensions
IEC 60245-2:1994+AMD1:1997+AMD2:1997 CSV Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 2: Test methods
ISO 11900-1:2007 Tools for pressing Ball-lock punch retainers Part 1: Types A and B, rectangular and square for light duty
ISO 6162-1:2012 Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
IEC 60269-3:2010+AMD1:2013+AMD2:2019 CSV Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar applications) - Examples of standardized systems of fuses A to F
IEC PAS 61076-2-107:2007 Connectors for electronic equipment - Product requirements - Part 2-107: Circular connectors - Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw-locking
ISO 9183-2:2011 Tools for pressing — Wear plates for press dies — Part 2: Type B
I.S. ENV 1999-1-1:1998 EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL RULES - GENERAL RULES AND RULES FOR BUILDINGS
I.S. EN ISO 10373:1995 IDENTIFICATION CARDS - TEST METHODS
I.S. EN 61169-1:2013 RADIO-FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS
ISO 7379:1983 Hexagon socket head shoulder screws
ISO 8017:2007 Tools for moulding Guide pillars, straight and shouldered, and locating guide pillars, shouldered
ISO 16873:2011 Hydraulic fluid power — Pressure switches — Mounting surfaces
IEC PAS 61076-3-111:2002 Connectors for electronic equipment - Part 3-111: Detail specification for 8-way, shielded and unshielded, free and fixed connectors, for industrial environments for frequencies up to 250 MHz
EN 61169-1:2013/AC:2016-02 RADIO-FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS (IEC 61169-1:2013)
EN ISO 6414:1994 Technical drawings for glassware (ISO 6414:1982)
I.S. EN ISO 6414:1995 TECHNICAL DRAWINGS FOR GLASSWARE
DIN EN 15049 E : 2007 RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - TORSION BAR, STEEL
BS EN 22553:1995 Welded, brazed and soldered joints. Symbolic representation on drawings
IEC 61076-4-101:2001 Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality - Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917
BS EN ISO 9013:2017 Thermal cutting. Classification of thermal cuts. Geometrical product specification and quality tolerances
ISO 9974-1:1996 Connections for general use and fluid power Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Part 1: Threaded ports
ISO 17450-3:2016 Geometrical product specifications (GPS) General concepts Part 3: Toleranced features
UNE-EN 13081:2009 Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler
BS EN ISO 6149-3:2007 Connections for hydraulic fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing Dimensions, design, test methods and requirements for light-duty (L series) stud ends
BS EN 1375:2002 Identification card system. Intersector integrated circuit(s) card additional formats. ID-000 card size and physical characteristics
BS EN 12890:2000 Founding. Patterns, pattern equipment and coreboxes for the production of sand moulds and sand cores
BS EN ISO 13565-2:1998 Geometric product specifications (GPS). Surface texture: Profile method. Surfaces having stratified functional properties Height characterization using the linear material ration curve
BS EN 1400-2:2002 Child use and care articles. Soothers for babies and young children Mechanical requirements and tests
IEC 61076-2-106:2011 Connectors for electronic equipment - Product requirements - Part 2-106: Circular connectors - Detail specification for connectors M 16 x 0,75 with screw-locking and degree of protection IP40 or IP65/67
ISO 12163:1999 Dental baseplate/modelling wax
BS EN 14879-1:2005 0rganic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Terminology, design and preparation of substrate
ISO 128-1:2003 Technical drawings General principles of presentation Part 1: Introduction and index
IEC 61076-4-115:2003 Connectors for electronic equipment - Part 4-115: Printed board connectors - Backplane connector for InfiniBand equipment
BS EN 837-3:1998 Pressure gauges Diaphragm and capsule pressure gauges. Dimensions, metrology, requirements and testing
BS EN ISO 19054 : 2006 RAIL SYSTEMS FOR SUPPORTING MEDICAL EQUIPMENT (ISO 19054:2005)
BS EN ISO 5620-2:1997 Shipbuilding and marine structures. Filling connection for drinking water tanks Components
UNE-EN 13083:2009 Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading
BS EN 13081 : 2008 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - VAPOUR COLLECTION ADAPTOR AND COUPLER
BS EN ISO 12163:2000 Dental baseplate/modelling wax
BS EN ISO 6873:2013 Dentistry. Gypsum products
UNE-EN ISO 2553:2014 Welding and allied processes - Symbolic representation on drawings - Welded joints (ISO 2553:2013)
UNE-EN ISO 5171:2011 Gas welding equipment - Pressure gauges used in welding, cutting and allied processes (ISO 5171:2009)
ISO 8430-1:2016 Resistance spot welding Electrode holders Part 1: Taper fixing 1:10
BS EN 13083 : 2008 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - ADAPTOR FOR BOTTOM LOADING AND UNLOADING
UNE-EN 857:2015 Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification
IEC 61076-2-107:2010 Connectors for electronic equipment - Product requirements - Part 2-107: Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw locking
ISO 1179-3:2007 Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H)
ISO 13565-3:1998 Geometrical Product Specifications (GPS) Surface texture: Profile method; Surfaces having stratified functional properties Part 3: Height characterization using the material probability curve
IEC 61076-2-109:2014 Connectors for electronic equipment - Product requirements - Part 2-109: Circular connectors - Detail specification for connectors with M 12 x 1 screw-locking, for data transmission frequencies up to 500 MHz
ISO 9974-3:1996 Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 3: Stud ends with metal-to-metal sealing (type B)
IEC 61076-4-108:2002 Connectors for electronic equipment - Part 4-108: Printed board connectors with assessed quality - Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1
ISO 1179-1:2013 Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 1: Threaded ports
ISO 1938-1:2015 Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 1: Plain limit gauges of linear size
ISO 25178-1:2016 Geometrical product specifications (GPS) Surface texture: Areal Part 1: Indication of surface texture
BS EN 15272-2:2007 Inland navigation vessels. Rope leading Fairlead
BS EN 14882:2005 Rubber or plastic coated fabrics. Determination of the static and dynamic coefficient of friction
ISO 14660-2:1999 Geometrical Product Specifications (GPS) Geometrical features Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature
IEC 61076-2-101:2012 Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking
ISO 9974-2:1996 Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 2: Stud ends with elastomeric sealing (type E)
ISO 20482:2013 Metallic materials — Sheet and strip — Erichsen cupping test
ISO 15136-1:2009 Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 1: Pumps
ISO 8015:2011 Geometrical product specifications (GPS) Fundamentals Concepts, principles and rules
IEC 61076-3-118:2010 Connectors for electronic equipment - Product requirements - Part 3-118: Rectangular connectors - Detail specification for a 4 pole plus PE power connector with push-pull coupling
ISO 6264:1998 Hydraulic fluid power — Pressure-relief valves — Mounting surfaces
IEC 60130-9:2011 Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment
BS EN 14372:2004 Child use and care articles. Cutlery and feeding utensils. Safety requirements and tests
IEC 61076-2-104:2014 Connectors for electronic equipment - Product requirements - Part 2-104: Circular connectors - Detail specification for circular connectors with M8 screw-locking or snap-locking
BS EN 15049:2007 Railway applications. Suspension components. Torsion bar, steel
ISO 9013:2017 Thermal cutting — Classification of thermal cuts — Geometrical product specification and quality tolerances
IEC 61076-4-114:2003 Connectors for electronic equipment - Part 4-114: Printed board connectors - Detail specification for two-part connector with integrated shielding function having a grid of 1 mm x 1,5 mm
IEC 60127-6:2014 Miniature fuses - Part 6: Fuse-holders for miniature fuse-links
BS EN 1426:2015 Bitumen and bituminous binders. Determination of needle penetration
IEC 60512-16-5:2008 Connectors for electronic equipment - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts)
BS EN 25822:1992 Spot welding equipment. Taper plug gauges and taper ring gauges
ISO 16000-10:2006 Indoor air Part 10: Determination of the emission of volatile organic compounds from building products and furnishing Emission test cell method
ISO 17296-3:2014 Additive manufacturing — General principles — Part 3: Main characteristics and corresponding test methods
ISO 6149-2:2006 Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends
UNE-EN ISO 20482:2014 Metallic materials - Sheet and strip - Erichsen cupping test (ISO 20482:2013)
ISO 19054:2005 Rail systems for supporting medical equipment
IEC 61076-1:2006 Connectors for electronic equipment - Product requirements - Part 1: Generic specification
ISO 6149-3:2006 Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends
ISO 12671:2012 Thermal spraying - Thermally sprayed coatings - Symbolic representation on drawings
ISO 14744-6:2000 Welding Acceptance inspection of electron beam welding machines Part 6: Measurement of stability of spot position
IEC 61076-2-102:2002 Connectors for electronic equipment - Part 2-102: Circular connectors with assessed quality - Detail specification for plugs and jacks for external low voltage power supply
EN 61515:2016 Mineral insulated metal-sheathed thermocouple cables and thermocouples
DIN EN 15016-1:2005-01 Technical drawings - Railway applications - Part 1: General Principles
EN 837-3:1996 Pressure gauges - Part 3: Diaphragm and capsule pressure gauges - Dimensions, metrology, requirements and testing
EN 196-1:2016 Methods of testing cement - Part 1: Determination of strength
EN 14350-1 : 2004 CHILD USE AND CARE ARTICLES - DRINKING EQUIPMENT - PART 1: GENERAL AND MECHANICAL REQUIREMENTS AND TESTS
EN ISO 14744-6:2000 Welding - Acceptance inspection of electron beam welding machines - Part 6: Measurement of stability of spot position (ISO 14744-6:2000)
EN ISO 8430-1:2016 Resistance spot welding - Electrode holders - Part 1: Taper fixing 1:10 (ISO 8430-1:2016)
EN 853:2015 Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification
EN 14372:2004 Child use and care articles - Cutlery and feeding utensils - Safety requirements and tests
I.S. EN ISO 13565-2:1998 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 2: HEIGHT CHARACTERIZATION USING THE LINEAR MATERIAL RATIO
EN ISO 6873:2013 Dentistry - Gypsum products (ISO 6873:2013)
EN ISO 16000-10:2006 Indoor air - Part 10: Determination of the emission of volatile organic compounds from building products and furnishing - Emission test cell method (ISO 16000-10:2006)
EN ISO 6149-2:2007 Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends (ISO 6149-2:2007)
EN 1400-2 : 2002 CHILD USE AND CARE ARTICLES - SOOTHERS FOR BABIES AND YOUNG CHILDREN - MECHANICAL REQUIREMENTS AND TESTS
EN ISO 15136-1:2009 Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps (ISO 15136-1:2009)
EN ISO 5620-2 : 1996 SHIPBUILDING AND MARINE STRUCTURES - FILLING CONNECTION FOR DRINKING WATER TANKS - PART 2: COMPONENTS
EN ISO/IEC 9661 : 1995
EN 16701:2014 Energetic materials for defence - Safety, vulnerability - Friability
EN ISO 1179-2:2013 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2013)
EN ISO 9312:2013 Resistance welding equipment - Insulated pins for use in electrode back-ups (ISO 9312:2013)
EN 14665:2004 Thermal spraying - Thermally sprayed coatings - Symbolic representation on drawings
EN 15049:2007 Railway applications - Suspension components - Torsion bar, steel
EN 15016-1:2004 Technical drawings - Railway applications - Part 1: General Principles
EN ISO 25178-1:2016 Geometrical product specifications (GPS) - Surface texture: Areal - Part 1: Indication of surface texture (ISO 25178-1:2016)
EN ISO 9013:2017 Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2017)
EN ISO 8430-3:2016 Resistance spot welding - Electrode holders - Part 3: Parallel shank fixing for end thrust (ISO 8430-3:2016)
EN 1375:2002 Identification card system - Intersector integrated circuit(s) card additional formats - ID-000 card size and physical characteristics
EN ISO 1179-1:2013 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 1179-1:2013)
EN 25822:1991 Spot welding equipment - Taper plug gauges and taper ring gauges (ISO 5822:1988)
EN ISO 9974-2:2000 Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 2: Stud ends with elastomeric sealing (type E) (ISO 9974-2:1996)
EN 854:2015 Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification
EN ISO 5171:2010 Gas welding equipment - Pressure gauges used in welding, cutting and allied processes (ISO 5171:2009)
EN ISO 8015:2011 Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011)
EN 857:2015 Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification
EN 4560:2015 Aerospace series - Pipe coupling 37°, spherical up to 21 000 kPa - Inch series - Technical specification
EN 15272-2:2007 Inland navigation vessels - Equipment for rope leading - Part 2: Fairlead
EN ISO 1179-3:2008 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) (ISO 1179-3:2007)
EN ISO 17296-3:2016 Additive manufacturing - General principles - Part 3: Main characteristics and corresponding test methods (ISO 17296-3:2014)
EN 14882:2005 Rubber or plastic coated fabrics - Determination of the static and dynamic coefficient of friction
EN 26873 : 1991 DENTISTRY - DENTAL GYPSUM PRODUCTS
EN ISO 286-1:2010/AC:2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCES, DEVIATIONS AND FITS (ISO 286-1:2010/COR 1:2013)
EN 16313:2013 Connections for heating and cooling appliances - Detachable connection with outside threaded pipe G ¾ A and inside cone
EN ISO 17450-3:2016 Geometrical product specifications (GPS) - General concepts - Part 3: Toleranced features (ISO 17450-3:2016)
EN 22553:1994 Welded, brazed and soldered joints - Symbolic representation on drawings (ISO 2553:1992)
EN ISO 20482:2013 Metallic materials - Sheet and strip - Erichsen cupping test (ISO 20482:2013)
EN 25827:1992 Spot welding - Electrode back-ups and clamps (ISO 5827:1983)
EN ISO 1179-4 : 2008 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only with metal-to-metal sealing (type B) (ISO 1179-4:2007)
EN 856:2015 Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification
EN ISO 8430-2:2016 Resistance spot welding - Electrode holders - Part 2: Morse taper fixing (ISO 8430-2:2016)
EN ISO 8062-3 : 2007 COR 2009 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS
EN ISO 286-2:2010/AC:2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS (ISO 286-2:2010/COR 1:2013)
EN ISO 14660-2 : 1999 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL FEATURES - PART 2: EXTRACTED MEDIAN LINE OF A CYLINDER AND A CONE, EXTRACTED MEDIAN SURFACE, LOCAL SIZE OF AN EXTRACTED FEATURE
EN ISO 1938-1:2015 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015)
ENV 1999-1-1 : 1998 EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL RULES - GENERAL RULES AND RULES FOR BUILDINGS
EN 3155-001:2016 Aerospace series - Electrical contacts used in elements of connection - Part 001: Technical Specification
EN ISO 10135:2009 Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007)
EN ISO 1938-2:2017 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017)
EN 562 : 2003 GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES
EN ISO 12163 : 2000 DENTAL BASEPLATE/MODELLING WAX
I.S. EN ISO 4288:1998 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - RULES AND PROCEDURES FOR THE ASSESSMENT OF SURFACE TEXTURE
I.S. EN ISO 13565-3:2000 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE -PROFILE METHOD - SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 3: HEIGHT CHARACTERIZATION USING THE MATERIAL PROBABILITY CURVE
EN ISO 9974-1:2000 Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 9974-1:1996)
EN 14879-1:2005 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate
EN ISO 9974-3:2000 Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3: Stud ends with metal-to-metal sealing (type B) (ISO 9974-3:1996)
INCITS/ISO/IEC 18809 : 2000 INFORMATION TECHNOLOGY - 8 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING AIT-1 WITH MIC FORMAT
ANSI INCITS 329 : 2000 : R2005 INFORMATION TECHNOLOGY - MAGNETIC TAPE CARTRIDGE, 0.50 IN (12.65 MM), SERIAL SERPENTINE, 208-TRACK, 85 940 BPI (3383 BPMM), DLT 5 FORMAT
DIN EN ISO 1938-2 E : 2017 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES (ISO 1938-2:2017)
ANSI INCITS 334 : 2000 : R2005 MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE, 0.50 IN (12.65 MM) SERIAL SERPENTINE 128-TRACK, 62500 BPI (2460 BPMM) DLT3XT FORMAT
DIN ISO 9183-2:2012-09 Tools for pressing - Wear plates for press dies - Part 2: Type B (ISO 9183-2:2011)
ONORM EN ISO 12402-7 : 2015 PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS (ISO 12402-7:2006 + AMD 1:2011)
DIN EN ISO 10135:2010-02 Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007)
01/207165 DC : DRAFT OCT 2001 IEC 61076-3-110 ED.1 - CONNECTORS FOR USE IN D.C., LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED APPLICATIONS - PART 3-110: DETAIL SPECIFICATION FOR 8 WAY CONNECTORS FOR FREQUENCIES UP TO 600 MHZ [CATEGORY 7 DETAIL SPECIFICATION]
BS ISO 17296-3 : 2014 ADDITIVE MANUFACTURING - GENERAL PRINCIPLES - PART 3: MAIN CHARACTERISTICS AND CORRESPONDING TEST METHODS
DIN EN 16701 E : 2015 ENERGETIC MATERIALS FOR DEFENCE - SAFETY, VULNERABILITY - FRIABILITY
ECMA 171 : 1ED 92 3,81 mm WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DATA/DAT-DC FORMAT USING 60 m AND 90 m LENGTH TAPES
ECMA 236 : 1ED 96 3,81 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DDS-3 FORMAT USING 125 M LENGTH TAPES
INCITS/ISO/IEC 12248 : 1993 INFORMATION TECHNOLOGY - 3,81 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DATA/DAT-DC FORMAT USING 60 M AND 90 M LENGTH TAPES
ONORM EN ISO 2553 : 2014 WELDING AND ALLIED PROCESSES - SYMBOLIC REPRESENTATION ON DRAWINGS - WELDED JOINTS (ISO 2553:2013)
DIN ISO 10069-1:2010-11 Tools for pressing - Elastomer pressure springs - Part 1: General specification (ISO 10069-1:2008)
I.S. EN ISO 19054:2006 RAIL SYSTEMS FOR SUPPORTING MEDICAL EQUIPMENT (ISO 19054:2005)
PD IEC/PAS 61076-2-114:2016 Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for data and power connectors with M8 screw-locking
CEI EN 61076-2-101 : 2013 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-101: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR M12 CONNECTORS WITH SCREW-LOCKING
DIN ISO 12166 E : 2006 RESISTANCE WELDING EQUIPMENT - PARTICULAR SPECIFICATIONS APPLICABLE TO TRANSFORMERS WITH ONE SECONDARY WINDING FOR MULTISPOT WELDING, AS USED IN THE AUTOMOBILE INDUSTRY
INCITS/ISO/IEC 15757 : 1998 : R2005 INFORMATION TECHNOLOGY - DATA INTERCHANGE ON 8 MM WIDE MAGNETIC TAPE CARTRIDGE - HELICAL SCAN RECORDING - DA-2 FORMAT
BS EN ISO 25178-1:2016 Geometrical product specifications (GPS). Surface texture: Areal Indication of surface texture
11/30256742 DC : 0 BS EN 62282-6-300 - FUEL CELL TECHNOLOGIES - PART 6-300: MICRO FUEL CELL POWER SYSTEMS - FUEL CARTRIDGE INTERCHANGEABILITY
ECMA 249 : 2ED 98 8MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DA-2 FORMAT
BS 2634-3:1980 Specification for roughness comparison specimens Cast surfaces
BS EN 61076-5:2001 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications In-line sockets with assessed quality. Sectional specification
ANSI INCITS 334 : 2000 : R2015 MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE, 0.50 IN (12.65 MM) SERIAL SERPENTINE 128-TRACK, 62500 BPI (2460 BPMM) DLT3XT FORMAT
ASTM F 1054 : 2001 Standard Specification for Conical Fittings (Withdrawn 2005)
I.S. EN 61076-4-114:2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-114: PRINTED BOARD CONNECTORS - DETAIL SPECIFICATION FOR TWO-PART CONNECTOR WITH INTEGRATED SHIELDING FUNCTION HAVING A GRID OF 1 MM X 1,5 MM
BS 2C 19:1994 Specification for pressure re-oiling connection (new type)
DIN EN ISO 1179-4:2008-08 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B)
ISO 18418-1:2016 Gasoline engines — Medium pressure liquid fuel supply connections — Part 1: 60° female cone connectors
DIN EN ISO 1938-2:2017-05 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES (ISO 1938-2:2017)
10/30218335 DC : 0 BS EN 60603-7-1 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-1: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS
15/30316155 DC : 0 BS ISO 16840-2 - WHEELCHAIR SEATING - PART 2: DETERMINATION OF PHYSICAL AND MECHANICAL CHARACTERISTICS OF DEVICES INTENDED TO MANAGE TISSUE INTEGRITY - SEAT CUSHIONS
11/30239331 DC : 0 BS ISO 14541 - HYDRAULIC FLUID POWER - DIMENSIONS AND REQUIREMENTS FOR SCREW-TO-CONNECT TYPE QUICK-ACTION COUPLINGS FOR GENERAL PURPOSE
BS ISO 9183-2:2011 Tools for pressing. Wear plates for press dies Type B
11/30237803 DC : 0 BS ISO 7790 - HYDRAULIC FLUID POWER - FOUR-PORT MODULAR STACK VALVES AND FOUR-PORT DIRECTIONAL CONTROL VALVES, SIZES 02, 03, 05, 07, 08 AND 10 - CLAMPING DIMENSIONS
NF EN 61076-2-107 : 2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-107: DETAIL SPECIFICATION FOR CIRCULAR HYBRID CONNECTORS M12 WITH ELECTRICAL AND FIBRE-OPTIC CONTACTS WITH SCREW LOCKING
15/30329306 DC : 0 BS ISO 2974 - DIESEL ENGINES - 60 DEGREE FEMALE CONES FOR HIGH-PRESSURE FUEL INJECTION COMPONENTS
BS ISO 484-1:2015 Shipbuilding. Ship screw propellers. Manufacturing tolerances Propellers of diameter greater than 2,50 m
ECMA 231 : 1ED 95 DATA INTERCHANGE ON 12,7 MM 128-TRACK MAGNETIC TAPE CARTRIDGES - DLT 4 FORMAT
SAE J 1926/2 : 2016 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ASME B1.1 THREADS AND O-RING SEALING - PART 2: HEAVY-DUTY (S SERIES) STUD ENDS
ISO 13012-1:2009 Rolling bearings Accessories for sleeve type linear ball bearings Part 1: Boundary dimensions and tolerances for series 1 and 3
EN ISO 12671 : 2014 THERMAL SPRAYING - THERMALLY SPRAYED COATINGS - SYMBOLIC REPRESENTATION ON DRAWINGS (ISO 12671:2012)
ECMA 196 : 1ED 93 DATA INTERCHANGE ON 12,7 MM 36-TRACK MAGNETIC TAPE CARTRIDGES
BS EN 15016-1:2004 Technical drawings. Railway applications General Principles
16/30328245 DC : 0 BS ISO 6164 - HYDRAULIC FLUID POWER - FOUR-SCREW, ONE-PIECE SQUARE FLANGE CONNECTIONS FOR USE AT PRESSURES OF 42 MPA, DN 10 TO 80
CSA B78.1 : 0 TECHNICAL DRAWINGS - GENERAL PRINCIPLES
09/30202313 DC : 0 BS EN 12514-3 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 3: SAFETY REQUIREMENTS AND TESTS - VALVES AND METERS
ANSI INCITS 322 : 2015 INFORMATION TECHNOLOGY - CARD DURABILITY TEST METHODS
BS EN ISO 1938-1:2015 Geometrical product specifications (GPS). Dimensional measuring equipment Plain limit gauges of linear size
BS ISO 16873:2011 Hydraulic fluid power. Pressure switches. Mounting surfaces
BS ISO/IEC 12246:1993 Information technology. 8 mm wide magnetic tape cartridge dual azimuth format for information interchange. Helical scan recording
BS EN 61076-4-107:2001 Connectors for electronic equipment Printed board connectors with assessed quality. Detail specification for shielded two-part connectors having a basic grid of 2,0 mm, fixed part with solder and press-in terminations for printed boards, free part with non-accessible insulation displacement and crimp terminations
UNE-EN ISO 8430-3:2016 Resistance spot welding - Electrode holders - Part 3: Parallel shank fixing for end thrust (ISO 8430-3:2016)
BS EN 1400 : 2013 CHILD USE AND CARE ARTICLES - SOOTHERS FOR BABIES AND YOUNG CHILDREN - SAFETY REQUIREMENTS AND TEST METHODS
09/30213890 DC : 0 BS EN 61076-3-110 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 3-110: DETAIL SPECIFICATION FOR SHIELDED, FREE AND FIXED CONNECTORSFOR DATA TRANSMISSION WITH FREQUENCIES UP TO 1000 MHZ
12/30250038 DC : 0 BS ISO 2698 - DIESEL ENGINES - CLAMP-MOUNTED FUEL INJECTORS, TYPES 7 AND 28
12/30260523 DC : 0 BS EN ISO 1179-2 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD NDS WITH ELASTOMERIC SEALING (TYPE E) (ISO/DIS 1179-2:2012)
13/30271610 DC : 0 BS ISO 17296-3 - ADDITIVE MANUFACTURING - RAPID TECHNOLOGIES (RAPID PROTOTYPING) - PART 3: TEST METHODS
BS 88-3(2010) : 2010 COR 2014 LOW-VOLTAGE FUSES - PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO F
ISO 2553:2013 Welding and allied processes Symbolic representation on drawings Welded joints
BS 2794-3:1978 Specification for textile machinery and accessories. Drafting equipment for preparation and spinning machinery Ring-spinning frames and speedframes - top and bottom aprons
UNI EN ISO 8015 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES
BS ISO 12251:2017 Diesel engines. Clamp mounted CR fuel injectors. Mounting dimensions
DIN EN ISO 1179-3:2008-08 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H)
NF EN ISO 25178-1 : 2016 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 1: INDICATION OF SURFACE TEXTURE
ANSI INCITS 265 : 1995 : R2001 INFORMATION TECHNOLOGY - MAGNETIC TAPE AND CARTRIDGE FOR INFORMATION INTERCHANGE - UNRECORDED, 36-TRACK, PARALLEL, 12.57 MM (0.495 IN), 1944 FTPMM (49378 FTPI) GROUP-CODED RECORDING
I.S. EN ISO/IEC 9661:1998 INFORMATION TECHNOLOGY - DATA INTERCHANGE ON 12.7 MM WIDE MAGNETIC TAPE CARTRIDGES - 18 TRACKS, 1491 DATA BYTES PER MILLIMETRE
BS EN 60603-7 : 2009 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS
DIN 3863:2003-08 COMPRESSION COUPLINGS - SPHERICAL LINERS - DESIGN AND TYPES OF PORT END U AND Y
13/30281716 DC : 0 BS EN 50299-2 - OIL-IMMERSED CABLE CONNECTION ASSEMBLIES FOR TRANSFORMERS AND REACTORS HAVING HIGHEST VOLTAGE FOR EQUIPMENT U[M] FROM 72,5 KV TO 550 KV - PART 2: DRY-TYPE CABLE TERMINATIONS
17/30353044 DC : 0 BS EN ISO 2553 - WELDING AND ALLIED PROCESSES - SYMBOLIC REPRESENTATION ON DRAWINGS - WELDED JOINTS
I.S. EN ISO 17296-3:2016 ADDITIVE MANUFACTURING - GENERAL PRINCIPLES - PART 3: MAIN CHARACTERISTICS AND CORRESPONDING TEST METHODS (ISO 17296-3:2014)
BS EN 61076-2-113:2017 Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for connectors with M12 screw locking with power and signal contacts for data transmission with frequency up to 100 MHz
BS ISO/IEC 11321:1992 Information technology. 3,81 mm wide magnetic tape cartridge for information interchange. Helical scan recording. DATA/DAT format
BS EN 61076-2-104:2014 Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for circular connectors with M8 screw-locking or snap-locking
INCITS/ISO/IEC 18810 : 2001 : R2006 INFORMATION TECHNOLOGY - 8 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING AIT-2 WITH MIC FORMAT
14/30301109 DC : 0 BS EN 50180-2 - BUSHINGS ABOVE 1 KV UP TO 52 KV AND FROM 250 A TO 3,15 KA FOR LIQUID FILLED TRANSFORMERS - PART 2: REQUIREMENT FOR BUSHING COMPONENTS
DIN ISO 6162-1:2006-02 HYDRAULIC FLUID POWER - FLANGE CONNECTORS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 1: FLANGE CONNECTORS FOR USE AT PRESSURES OF 3,5 MPA (35 BAR) TO 35 MPA (350 BAR), DN 13 TO DN 127
CEI EN 50243 : 2002 OUTDOOR BUSHINGS FOR 24 KV AND 36 KV AND FOR 5 KA AND 8 KA, FOR LIQUID FILLED TRANSFORMERS
DIN 3237-1:1994-10 STRAIGHT PATTERN VALVES WITH FLANGE SOCKET IN MAIN POWER CONNECTION - PART 1: WITHOUT LINING
DIN 502:2004-09 Driving Components - Flange bearings - Fastened with two screws
13/30274174 DC : 0 BS ISO 8133 - HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR ACCESSORIES FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) COMPACT SERIES
NF ISO 5597 : 2010 HYDRAULIC FLUID POWER - CYLINDERS - DIMENSIONS AND TOLERANCES OF HOUSINGS FOR SINGLE-ACTING PISTON AND ROD SEALS IN RECIPROCATING APPLICATIONS
04/30124528 DC : DRAFT OCT 2004 ISO/DIS 6149-1 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 1: PORTS WITH TRUNCATED HOUSING FOR O-RING SEAL
13/30240527 DC : 0 BS ISO 129-2 - TECHNICAL PRODUCT DOCUMENTATION - INDICATION OF DIMENSIONS AND TOLERANCES - PART 2: DIMENSIONING OF MECHANICAL ENGINEERING DRAWINGS
13/30253349 DC : 0 BS ISO 10110-19 - OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 19: OPTICAL FREEFORM SURFACES
DIN ISO 10907-1:2010-05 Tools for moulding - Locating rings - Part 1: Locating rings for mounting without thermal insulating sheets in small or medium moulds (types A and B) (ISO 10907-1:2008)
BS ISO 4288 : 96 AMD 9918 GEOMETRIC PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE - PROFILE METHOD: RULES AND PROCEDURES FOR THE ASSESSMENT OF SURFACE TEXTURE
BS EN 61076-3-104:2017 Connectors for electrical and electronic equipment. Product requirements Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz
ANSI INCITS 242 : 1994 : R2004 INFORMATION SYSTEMS - MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - 0.50 IN (12.65 MM), SERIAL SERPENTINE, 48-TRACK, 42 500 BPI (1673 BPMM)
SAE J 1926/3 : 2016 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ASME B1.1 THREADS AND O-RING SEALING - PART 3: LIGHT-DUTY (L-SERIES) STUD ENDS
NF ISO 5830 : 2011 RESISTANCE SPOT WELDING - MALE ELECTRODE CAPS
BS ISO 4401:2005 Hydraulic fluid power. Four-port directional control valves. Mounting surfaces
ECMA 120 : 3ED 93 DATA INTERCHANGE ON 12.7 MM 18-TRACK MAGNETIC TAPE CARTRIDGES
09/30199068 DC : 0 BS ISO 11926-3 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 263 INCH THREADS AND O-RING SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS
ISO/IEC 15895:1999 Information technology Data interchange on 12,7 mm 128-track magnetic tape cartridges DLT 3-XT format
I.S. EN 61076-4-115:2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-115: PRINTED BOARD CONNECTORS - BACKPLANE CONNECTOR FOR INFINIBAND EQUIPMENT
API 7-2 : 2017 THREADING AND GAUGING OF ROTARY SHOULDERED CONNECTIONS
CSA ISO/IEC 10373-1 : 2007 : INC : AMD 1 : 2014 : R2017 IDENTIFICATION CARDS - TEST METHODS - PART 1: GENERAL CHARACTERISTICS
ANSI INCITS 180 : 1990 : R2006 MAGNETIC TAPE AND CARTRIDGE FOR INFORMATION INTERCHANGE - 18-TRACK, PARALLEL, 1/2 INCH (12.65 MM), 37871 CPI (1491 CPMM), GROUP-CODED - REQUIREMENTS FOR RECORDING
PREN 4833 : DRAFT 2017 AEROSPACE SERIES - PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING LOCKED FITTING - FLARELESS END - INCH SERIES - EXTRA FINE THREAD PITCH
05/30135261 DC : DRAFT JUN 2005 ISO 1179-3 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H)
08/30189288 DC : DRAFT SEP 2008 BS EN 61076-2-107 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-107: DETAIL SPECIFICATION FOR CIRCULAR HYBRID CONNECTORS M12 WITH ELECTRICAL AND FIBRE-OPTIC CONTACTS WITH SCREW LOCKING
01/206171 DC : DRAFT AUG 2001
UNE-EN ISO 8430-1:2016 Resistance spot welding - Electrode holders - Part 1: Taper fixing 1:10 (ISO 8430-1:2016)
ANSI INCITS 282 : 1996 : R2006 INFORMATION TECHNOLOGY - MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE 0.50 IN (12.65 MM), SERIAL SERPENTINE, 128 TRACK, 62 500 BPI (2460 BPMM) DLT3 FORMAT
BS EN 61076-4-114:2003 Connectors for electronic equipment. Printed board connectors with assessed quality Detail specification for two-part connector with integrated shielding function having a grid of 1 mm x 1,5 mm
ISO 6751:2011 Tools for moulding — Ejector pins with cylindrical head
SAE J 1926/1 : 2016 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ASME B1.1 THREADS AND O-RING SEALING - PART 1: THREADED PORT WITH O-RING SEAL IN TRUNCATED HOUSING
INCITS/ISO/IEC 17462 : 2000 : R2006 INFORMATION TECHNOLOGY - 3,81 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DDS-4 FORMAT
DIN ISO 8693:2012-07 Tools for moulding - Flat ejector pins (ISO 8693:2011)
DIN CEN ISO/TS 8062-2;DIN SPEC 91184:2014-03 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013)
PREN 4836 : DRAFT 2017 AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING REDUCER - FLARELESS END - INCH SERIES - EXTRA FINE THREAD PITCH
DIN 406-10:1992-12 TECHNICAL DRAWINGS; DIMENSIONING; DEFINITIONS, GENERAL PRINCIPLES
BS ISO/IEC 10373-1 : 2006 IDENTIFICATION CARDS - TEST METHODS - PART 1: GENERAL CHARACTERISTICS
DIN ISO 6162-2:2006-02 HYDRAULIC FLUID POWER - FLANGE CONNECTORS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 2: FLANGE CONNECTORS FOR USE AT PRESSURES OF 35 MPA (350 BAR) TO 40 MPA (400 BAR), DN 13 TO DN 51
ISO/IEC 18836:2001 Information technology 8 mm wide magnetic tape cartridge for information interchange Helical scan recording MammothTape-2 format
ECMA 286 : 2ED 2000 DATA INTERCHANGE ON 12,7 MM 208-TRACK MAGNETIC TAPE CARTRIDGES - DLT 6 FORMAT
ECMA 152 : 2ED 93 DATA INTERCHANGE ON 12,7 MM 18-TRACK MAGNETIC TAPE CARTRIDGES - EXTENDED FORMAT
ECMA 146 : 1ED 90 3,81 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DATA/DAT FORMAT
IEC 61515:2016 Mineral insulated metal-sheathed thermocouple cables and thermocouples
UNI EN ISO 12671 : 2014 THERMAL SPRAYING - THERMALLY SPRAYED COATINGS - SYMBOLIC REPRESENTATION ON DRAWINGS
CEI EN 175301-801 : 2007 DETAIL SPECIFICATION: HIGH DENSITY RECTANGULAR CONNECTORS, ROUND REMOVABLE CRIMP CONTACTS
I.S. EN 61076-2-102:2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 2-102: CIRCULAR CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR PLUGS AND JACKS FOR EXTERNAL LOW VOLTAGE POWER SUPPLY
CEI EN 60130-9 : 2012 CONNECTORS FOR FREQUENCIES BELOW 3 MHZ - PART 9: CIRCULAR CONNECTORS FOR RADIO AND ASSOCIATED SOUND EQUIPMENT
I.S. EN IEC 61076-3-119:2018 CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-119: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR SHIELDED AND UNSHIELDED, FREE AND FIXED 10-WAY CONNECTORS WITH PUSH-PULL COUPLING FOR INDUSTRIAL ENVIRONMENTS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 100 MHZ
ECMA 258 : 1ED 97 DATA INTERCHANGE ON 12,7 MM 128-TRACK MAGNETIC TAPE CARTRIDGES - DLT 3-XT FORMAT
I.S. EN 50299-1:2014 OIL-IMMERSED CABLE CONNECTION ASSEMBLIES FOR TRANSFORMERS AND REACTORS HAVING HIGHEST VOLTAGE FOR EQUIPMENT UM FROM 72,5 KV TO 550 KV - PART 1: FLUID-FILLED CABLE TERMINATIONS
UNE-EN 62282-6-300:2013 Fuel cell technologies - Part 6-300: Micro fuel cell power systems - Fuel cartridge interchangeability
I.S. EN ISO 1938-1:2015 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: PLAIN LIMIT GAUGES OF LINEAR SIZE (ISO 1938-1:2015)
I.S. EN ISO 8430-3:2016 RESISTANCE SPOT WELDING - ELECTRODE HOLDERS - PART 3: PARALLEL SHANK FIXING FOR END THRUST (ISO 8430-3:2016)
ISO/TS 16840-12:2015 Wheelchair seating Part 12: Apparatus and method for cushion envelopment testing
I.S. EN IEC 61076-2-111:2018 CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-111: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR POWER CONNECTORS WITH M12 SCREW-LOCKING
I.S. EN ISO 8430-1:2016 RESISTANCE SPOT WELDING - ELECTRODE HOLDERS - PART 1: TAPER FIXING 1:10 (ISO 8430-1:2016)
ISO/IEC 16382:2000 Information technology Data interchange on 12,7 mm 208-track magnetic tape cartridges DLT 6 format
I.S. EN ISO 1179-3:2008 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H)
ISO 16792:2015 Technical product documentation Digital product definition data practices
ISO 6162-2:2018 Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76
NFPA T3.5.50 : 2009 : R2014 HYDRAULIC FLUID POWER - TWO-, THREE-, AND FOUR-PORT SCREW-IN CARTRIDGE VALVES - CAVITIES WITH UN AND UNF THREADS
NFPA T3.5.50 : 2009 HYDRAULIC FLUID POWER - TWO-, THREE-, AND FOUR-PORT SCREW-IN CARTRIDGE VALVES - CAVITIES WITH UN AND UNF THREADS
ISO 11687-3:1995 Plain bearings Pedestal plain bearings Part 3: Centre flange bearings
UNI EN ISO 5171 : 2010 GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES
UNI EN ISO 1179-1 : 2013 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 1: THREADED PORTS
UNI EN ISO 1179-2 : 2013 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS WITH ELASTOMERIC SEALING (TYPE E)
I.S. EN 50180-2:2015 BUSHINGS ABOVE 1 KV UP TO 52 KV AND FROM 250 A TO 3,15 KA FOR LIQUID FILLED TRANSFORMERS - PART 2: REQUIREMENT FOR BUSHING COMPONENTS
ECMA 288 : 1ED 99 3,81 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DDS-4 FORMAT
UNE-EN ISO 17296-3:2017 Additive manufacturing - General principles - Part 3: Main characteristics and corresponding test methods (ISO 17296-3:2014)
NF EN 61076 4-114 : 2005 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-114: PRINTED BOARD CONNECTORS - DETAIL SPECIFICATION FOR TWO-PART CONNECTOR WITH INTEGRATED SHIELDING FUNCTION HAVING A GRID OF 1 MM X 1,5 MM
UNE-EN 1400:2013 Child use and care articles - Soothers for babies and young children - Safety requirements and test methods
BS ISO 2974:2018 Diesel engines. 60° female cones for high-pressure fuel injection components
ISO/IEC 10373-2:2015 Identification cards Test methods Part 2: Cards with magnetic stripes
ISO 468:1982 Surface roughness — Parameters, their values and general rules for specifying requirements
ISO 12251:2017 Diesel engines — Clamp mounted CR fuel injectors — Mounting dimensions
DIN EN ISO 5171:2010-07 GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES
ISO 10110-8:2010 Optics and photonics Preparation of drawings for optical elements and systems Part 8: Surface texture; roughness and waviness
ISO 16839:2013 Steel wire ropes — Determination of the transverse rigidity of steel wire ropes under no axial load condition
ISO 10073:2008 Tools for moulding — Support pillars
I.S. EN 61076-4-108:2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-108: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR CABLE-TO-BOARD CONNECTORS, WITH A MODULAR PITCH OF 25 MM AND INTEGRATED SHIELDING FUNCTION, APPLICABLE FOR TRANSVERSE PACKING DENSITY OF 15 MM, HAVING A BASIC GRID OF 2,5 MM IN ACCORDANCE WITH IEC 60917-1
ISO 8018:2007 Tools for moulding Guide bushes, headed, and locating guide bushes, headed
ISO 11687-2:1995 Plain bearings Pedestal plain bearings Part 2: Side flange bearings
IEC 60269-3:2010+AMD1:2013 CSV Low-voltage fuses - Part 3: Supplementary requirements for fuses foruse by unskilled persons (fuses mainly for household or similar applications) - Examples of standardized systems of fuses A to F
ISO 8694:2011 Tools for moulding — Shouldered ejector pins
ISO 3601-2:2016 Fluid power systems — O-rings — Part 2: Housing dimensions for general applications
ISO/IEC 12248:1993 Information technology 3,81 mm wide magnetic tape cartridge for information interchange Helical scan recording DATA/DAT-DC format using 60 m and 90 m length tapes
ISO/TR 10064-4:1998 Code of inspection practice Part 4: Recommendations relative to surface texture and tooth contact pattern checking
IEC PAS 61076-2-110:2010 Connectors for electronic equipment - Product requirements - Part 2-110: Circular connectors - Detail specification for circular connectors M12 x 1 with screw-locking, for high speed Ethernet and high speed data communication with frequencies up to 500 MHz and 10 gigabits/s
IEC 61076-5:2001 Connectors for use in d.c., low-frequency analogue and digital high-speed data applications - Part 5: In-line sockets with assessed quality - Sectional specification
EN 61076-3-104:2017 Connectors for electrical and electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz
CEN ISO/TS 8062-2 : 2013 COR 2014 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013, CORRECTED VERSION 2013-11-01)
DIN EN ISO 12402-7:2015-08 (Draft) PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS
DIN EN ISO 6149-3:2007-05 Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends (ISO 6149-3:2006)
DIN EN ISO 19054 E : 2017 RAIL SYSTEMS FOR SUPPORTING MEDICAL EQUIPMENT (ISO 19054:2005 + AMD1:2016)
DIN EN ISO 16000-10:2006-06 Indoor air - Part 10: Determination of the emission of volatile organic compounds from building products and furnishing - Emission test cell method (ISO 16000-10:2006)
DIN EN ISO 6149-2:2007-05 Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends (ISO 6149-2:2006)
DIN EN 14372 E : 2004 CHILD USE AND CARE ARTICLES - CUTLERY AND FEEDING UTENSILS SAFETY - REQUIREMENTS AND TESTS
UNE-EN ISO 9312:2013 Resistance welding equipment - Insulated pins for use in electrode back-ups (ISO 9312:2013)
ISO 1179-2:2013 Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)
BS EN ISO 16000-10:2006 Indoor air Determination of the emission of volatile organic compounds from building products and furnishing. Emission test cell method
BS EN ISO 14744-6:2001 Welding. Acceptance inspection of electron beam welding machines Measurement of stability of spot position
ISO 5620-2:1992 Shipbuilding and marine structures Filling connection for drinking water tanks Part 2: Components
ISO 8430-3:2016 Resistance spot welding Electrode holders Part 3: Parallel shank fixing for end thrust
BS EN ISO 15136-1:2001 Downhole equipment for petroleum and natural gas industries. Progressing cavity pump systems for artificial lift Pumps
ISO 9312:2013 Resistance welding equipment — Insulated pins for use in electrode back-ups
BS EN ISO 9974-2:2000 Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Stud ends with elastomeric sealing (type E)
ISO 1938-2:2017 Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 2: Reference disk gauges
BS EN 854:2015 Rubber hoses and hose assemblies. Textile reinforced hydraulic type. Specification
ISO/TS 8062-2:2013 Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 2: Rules
BS EN ISO 6149-2:2007 Connections for hydraulic fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends
ISO 1179-4:2007 Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 4: Stud ends for general use only with metal-to-metal sealing (type B)
BS EN ISO 13565-3:2000 Geometric product specifications (GPS). Surface texture: Profile method. Surfaces having stratified functional properties Height characterization using the material probability curve
BS EN 562:2003 Gas welding equipment. Pressure gauges used in welding, cutting and allied processes
ISO 6873:2013 Dentistry — Gypsum products
IEC 60512-16-9:2008 Connectors for electronic equipment - Tests and measurements - Part 16-9: Mechanical tests on contacts and terminations - Test 16i: Grounding contact spring holding force
HD 22.2 S3:1997/A1:2002 CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V AND HAVING THERMOSETTING INSULATION - TEST METHODS
EN 61076-4-115:2003 Connectors for electronic equipment - Part 4-115: Printed board connectors - Backplane connector for InfiniBand equipment
EN 61076-2-101:2012 Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking
EN 60512-16-5:2008 Connectors for electronic equipment - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts)
EN ISO 4288 : 1997 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - RULES AND PROCEDURES FOR THE ASSESSMENT OF SURFACE TEXTURE
EN 61076-2-109 : 2014 Connectors for electronic equipment - Product requirements - Part 2-109: Circular connectors - Detail specification for connectors with M 12 × 1 screw-locking, for data transmission frequencies up to 500 MHz
EN 61076-4-107:2001 Connectors for electronic equipment - Part 4-107: Printed board connectors with assessed quality - Detail specification for shielded two-part connectors having a basic grid of 2,0 mm, fixed part with solder and press-in terminations for printed boards, free part with non-accessible insulation displacement and crimp terminations
EN 61076-4-111:2002 Connectors for electronic equipment - Part 4-111: Printed board connectors with assessed quality - Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm in accordance with IEC 60917-1
EN 60130-9:2011 Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment
EN 50299-1:2014 Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment Um from 72,5 kV to 550 kV - Part 1: Fluid-filled cable terminations
EN ISO 12085:1997/AC:2008 GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE - PROFILE METHOD - MOTIF PARAMETERS
DIN EN 857:2016-09 RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED COMPACT TYPE FOR HYDRAULIC APPLICATIONS - SPECIFICATION
EN ISO 13565-3 : 2000 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE - PROFILE METHOD - SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 3: HEIGHT CHARACTERIZATION USING THE MATERIAL PROBABILITY CURVE
EN 50299-2:2014 Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment Um from 72,5 kV to 550 kV - Part 2: Dry-type cable terminations
DIN EN 854:2016-09 RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE REINFORCED HYDRAULIC TYPE - SPECIFICATION
DIN ISO 12166:2006-02 RESISTANCE WELDING EQUIPMENT - PARTICULAR SPECIFICATIONS APPLICABLE TO TRANSFORMERS WITH ONE SECONDARY WINDING FOR MULTISPOT WELDING, AS USED IN THE AUTOMOBILE INDUSTRY
EN 61076-2-102:2002 Connectors for electronic equipment - Part 2-102: Circular connectors with assessed quality - Detail specification for plugs and jacks for external low voltage power supply
EN 62282-6-300:2013 Fuel cell technologies - Part 6-300: Micro fuel cell power systems - Fuel cartridge interchangeability
EN 60603-7-1:2011 Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors
EN 60512-16-9 : 2008 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-9: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16I: GROUNDING CONTACT SPRING HOLDING FORCE
EN 61076-2-107 : 2010 Connectors for electronic equipment - Product requirements - Part 2-107: Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw locking
EN 50343 : 2014 AMD 1 2017 RAILWAY APPLICATIONS - ROLLING STOCK - RULES FOR INSTALLATION OF CABLING
EN 61076-2-105:2008 Connectors for electronic equipment - Product requirements - Part 2-105: Circular connectors - Detail specification for M5 connectors with screw-locking
DIN ISO 10242-1:2012-06 Tools for pressing - Punch holder shanks - Part 1: Type A (ISO 10242-1:2011)
EN ISO 13565-2 : 1997 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 2: HEIGHT CHARACTERIZATION USING THE LINEAR MATERIAL RATIO
EN 61076-3-103:2004 Connectors for electronic equipment - Part 3-103: Rectangular connectors - Detail specification for single row connectors with non-removable ribbon cable contacts on 1,25 mm pitch used for high speed serial data (HSSDC)
EN 60127-6:2014 Miniature fuses - Part 6: Fuse-holders for miniature fuse-links
EN 61076-3-118 : 2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-118: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR A 4 POLE + PE POWER CONNECTOR WITH PUSH-PULL COUPLING
BS 4215-4:1990 Resistance spot welding electrodes, electrode holders and ancillary equipment Specification for taper plug gauges and taper ring gauges

EN ISO 4287:1998/A1:2009 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - TERMS, DEFINITIONS AND SURFACE TEXTURE PARAMETERS
ISO/TR 14638:1995 Geometrical product specification (GPS) Masterplan
ISO 12179:2000 Geometrical Product Specifications (GPS) Surface texture: Profile method Calibration of contact (stylus) instruments
EN ISO 13565-3 : 2000 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE - PROFILE METHOD - SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 3: HEIGHT CHARACTERIZATION USING THE MATERIAL PROBABILITY CURVE
ISO 4287:1997 Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters
ISO 13565-3:1998 Geometrical Product Specifications (GPS) Surface texture: Profile method; Surfaces having stratified functional properties Part 3: Height characterization using the material probability curve
EN ISO 4288 : 1997 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - RULES AND PROCEDURES FOR THE ASSESSMENT OF SURFACE TEXTURE
ISO 1101:2017 Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out
EN ISO 14660-1:1999 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL FEATURES - PART 1: GENERAL TERMS AND DEFINITIONS
EN ISO 81714-1:2010 Design of graphical symbols for use in the technical documentation of products - Part 1: Basic rules (ISO 81714-1:2010)
ISO 14253-1:2017 Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 1: Decision rules for verifying conformity or nonconformity with specifications
EN ISO 3098-2:2000 Technical product documentation - Lettering - Part 2: Latin alphabet, numberal and marks (ISO 3098-2:2000)
EN ISO 8785 : 1999 GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE IMPERFECTIONS - TERMS, DEFINITIONS AND PARAMETERS
EN ISO 11562:1997/AC:2008 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - METROLOGICAL CHARACTERISTICS OF PHASE CORRECT FILTERS
ISO 10135:2007 Geometrical product specifications (GPS) — Drawing indications for moulded parts in technical product documentation (TPD)
ISO 81714-1:2010 Design of graphical symbols for use in the technical documentation of products Part 1: Basic rules
ISO 1456:2009 Metallic and other inorganic coatings — Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium
EN ISO 13565-2 : 1997 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 2: HEIGHT CHARACTERIZATION USING THE LINEAR MATERIAL RATIO
ISO 5436-2:2012 Geometrical product specifications (GPS) — Surface texture: Profile method; Measurement standards — Part 2: Software measurement standards
ISO 3274:1996 Geometrical Product Specifications (GPS) — Surface texture: Profile method — Nominal characteristics of contact (stylus) instruments
ISO 3098-2:2000 Technical product documentation — Lettering — Part 2: Latin alphabet, numerals and marks
ISO 8785:1998 Geometrical Product Specification (GPS) — Surface imperfections — Terms, definitions and parameters
ISO 129-1:2004 Technical drawings Indication of dimensions and tolerances Part 1: General principles
ISO 5436-1:2000 Geometrical Product Specifications (GPS) Surface texture: Profile method; Measurement standards Part 1: Material measures
EN ISO 13565-1 : 1997 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 1: FILTERING AND GENERAL MEASUREMENT CONDITIONS
ISO 14660-1:1999 Geometrical Product Specifications (GPS) Geometrical features Part 1: General terms and definitions
EN ISO 12085:1997/AC:2008 GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE - PROFILE METHOD - MOTIF PARAMETERS
EN ISO 3274 : 1997 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS
ISO 10209-1:1992 Technical product documentation — Vocabulary — Part 1: Terms relating to technical drawings: general and types of drawings

View more information
£58.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.