• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ISO 261:1998

Current

Current

The latest, up-to-date edition.

ISO general purpose metric screw threads General plan

Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English, French

Published date

20-12-1998

This International Standard specifies ISO general purpose metric screw threads (M) having basic profile according to ISO 68-1. Basic dimensions are given in ISO 724. For tolerances see ISO 965-1.

DocumentType
Standard
Pages
5
PublisherName
International Organization for Standardization
Status
Current
Supersedes

Standards Relationship
UNE 17702:2002 Identical
NBN EN 24015 : 1992 Identical
DIN 13-12 Beiblatt:1975-11 Similar to
NBN EN 29168 : 1995 Identical
NBN EN 27435 : 1992 Identical
NBN EN 27434 : 1992 Identical
NF ISO 261 : 1999 Identical
BIS IS 4218-2 : 2001 Identical
NBN EN 27436 : 1992 Identical
BS ISO 261:1998 Identical
NBN E 03 003 : 1984 Identical
NBN EN 28839 : 1992 Identical
NFE 03 013 : 1982 Similar to
NS 1872 : 1ED 1983 Identical
NBN EN 286-4 : 1994 Identical
NBN EN 24766 : 1992 Identical
PN ISO 261 : 2001 Identical
NEN ISO 261 : 1999 Identical
UNI ISO 261:2022 Identical
DIN ISO 261:1999-11 Identical
DIN 13-12:1988-10 Corresponds

ISO 17447-2:2015 Road Vehicles Glow-plugs with conical seating and their cylinder head housing Part 2: Basic characteristics and dimensions for ceramic-sheath-type glow-plugs
BS ISO 1751:2012 Ships and marine technology. Ships’ side scuttles
BS EN ISO 14582:2013 Fasteners. Hexalobular socket countersunk head screws, high head
02/704463 DC : DRAFT MAR 2002 PREN 14399-4 - HIGH-STRENGTH STRUCTURAL BOLTING FOR PRELOADING - PART 4: SYSTEM HV - HEXAGON BOLT AND NUT ASSEMBLIES
04/30104779 DC : DRAFT SEP 2004 BS ISO 14508 - ROAD VEHICLES - SPARK PLUGS - TERMINALS
BS IEC 60191-1:2007 Mechanical standardization of semiconductor devices General rules for the preparation of outline drawings of discrete devices
ISO 6149-4:2017 Connections for fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
UNE-EN ISO 7380-2:2012 Button head screws - Part 2: Hexagon socket button head screws with collar (ISO 7380-2:2011)
CEI EN 61056-2 : 2014 GENERAL PURPOSE LEAD-ACID BATTERIES (VALVE-REGULATED TYPES) - PART 2: DIMENSIONS, TERMINALS AND MARKING
BS ISO 17447-1:2015 Road Vehicles. Glow-plugs with conical seating and their cylinder head housing Basic characteristics and dimensions for metal-sheath-type glow-plugs
10/30219414 DC : 0 BS EN 13617-4 - PETROL FILLING STATIONS - PART 4: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SWIVELS FOR USE ON METERING PUMPS AND DISPENSERS
EN IEC 60191-1:2018 Mechanical standardization of semiconductor devices - Part 1: General rules for the preparation of outline drawings of discrete devices
DIN EN ISO 14582 E : 2014 FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK HEAD SCREWS, HIGH HEAD (ISO 14582:2013)
BS EN 16329:2013 Diesel and domestic heating fuels. Determination of cold filter plugging point. Linear cooling bath method
05/30125061 DC : DRAFT MAR 2005 ISO 9974-4 - CONNECTIONS FOR GENERAL USE AND FLUID POWER STUD ENDS WITH ISO 261 THREADS WITH ELASTOMER METAL-TO-METAL SEALING - PART 4: DIMENSIONS, METHODS AND REQUIREMENTS FOR EXTERNAL PORT PLUGS
NF ISO 4144 : 2009 PIPEWORK - STAINLESS STEEL FITTINGS THREADED IN ACCORDANCE WITH ISO 7-1
13/30277431 DC : 0 BS EN 14399-3 - HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 3: SYSTEM HR - HEXAGON BOLT AND NUT ASSEMBLIES
02/705734 DC : DRAFT MAY 2002 EN ISO 17292 - METAL BALL VALVES FOR THE PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES
I.S. EN 24032:1992 HEXAGON NUTS, STYLE 1 - PRODUCT GRADES A AND B
BS 308-1.10(1996) : 1996 TECHNICAL DRAWINGS - SCREW THREADS AND THREADED PARTS - GENERAL CONVENTIONS
BS ISO/IEC 2593:1993 Information technology. Telecommunications and information exchange between systems. 34-pole DTE/DCE interface connector mateability dimensions and contact number assignments
04/30102972 DC : DRAFT SEP 2004 BS ISO 19812 - ROAD VEHICLES - M10 X 1 COMPACT SPARK PLUGS WITH FLAT SEATING AND 16 MM HEXAGON AND THEIR CYLINDER HEAD HOUSING
12/30258455 DC : 0 FPREN 60065:2011+FPRAA - AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
I.S. EN 24014:1992 HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B
02/614072 DC : DRAFT NOV 2002 EN ISO 9409-1 - MANIPULATING INDUSTRIAL ROBOTS - MECHANICAL INTERFACES - PART 1: PLATES
09/30202626 DC : 0 BS EN ISO 12474 - HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD
02/709495 DC : DRAFT JULY 2002 EN 13617-4 - PETROL FILLING STATIONS - PART 4: SAFETY AND ENVIRONMENTAL REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SWIVELS FOR USE ON METERING PUMPS AND DISPENSERS
10/30199074 DC : 0 BS ISO 6162-1 - HYDRAULIC FLUID POWER - FLANGE CONNECTORS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 1: FLANGE CONNECTORS FOR USE AT PRESSURES OF 3,5 MPA (35 BAR) TO 35 MPA (350 BAR), DN 13 TO DN 127
I.S. EN 116:2015 DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - STEPWISE COOLING BATH METHOD
API 674 REDLINE : 2010 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
BS EN ISO 6149-1:2007 Connections for hydraulic fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing Ports with truncated housing for O-ring seal
CSA ISO 4903 : 1995 INFORMATION TECHNOLOGY - DATA COMMUNICATION - 15-POLE DTE/DCE INTERFACE CONNECTER AND CONTACT NUMBER ASSIGNMENTS
BIS IS 5474 : 2012(R2017) SHIPBUILDING - SHIPS' SIDE SCUTTLES
ISO 13707:2000 Petroleum and natural gas industries Reciprocating compressors
BS ISO 8434-1 : 94 AMD 9583 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - 24 DEGREE COMPRESSION FITTINGS
DIN ISO 1751:2015-12 SHIPS AND MARINE TECHNOLOGY - SHIPS' SIDE SCUTTLES (ISO 1751:2012)
API 618 : 2007 RECIPROCATING COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
NF EN ISO 8434-1 : 2007 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
BS 4219-3:1985 Slotted set screws: metric series Specification for slotted set screws with long dog point
DIN ISO 262:1999-11 ISO general purpose metric screw threads - Selected sizes for screws, bolts and nuts (ISO 262:1998)
05/30135570 DC : DRAFT NOV 2005 ISO 2705 - ROAD VEHICLES - M12 X 1,25 SPARK PLUGS WITH FLAT SEATING AND THEIR CYLINDER HEAD HOUSINGS
DIN ISO 6149-3:1996-11 CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING - PART 3: LIGHT DUTY (L SERIES) STUD ENDS - DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS
98/714983 DC : DRAFT SEP 1998 ISO/CD 6149-4 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING - PART 4: EXTERNAL HEX AND INTERNAL HEX PORT PLUGS - DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS
BS ISO 7041:2012 Prevailing torque type hexagon nuts (with non-metallic insert), style 2. Property classes 9 and 12
DIN EN ISO 4766:2011-11 Slotted set screws with flat point (ISO 4766:2011)
BS ISO 28741:2013 Road vehicles. Spark-plugs and their cylinder head housings. Basic characteristics and dimensions
API 685 : 2011 SEALLESS CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL, AND GAS INDUSTRY PROCESS SERVICE
BS ISO 8434-2:2007 Metallic tube connections for fluid power and general use 37° flared connectors
10/30227442 DC : 0 BS EN ISO 13710 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - RECIPROCATING POSITIVE DISPLACEMENT PUMPS
BS ISO 2346:2001 Road vehicles. M14 x 1,25 compact spark-plugs with flat seating and 19 mm hexagon and their cylinder head housing
BS ISO 19812:2006 Road vehicles. M10 x 1 compact spark-plugs with flat seating and 16 mm hexagon and their cylinder head housings
ISO 7720:2012 Prevailing torque type all-metal hexagon nuts, style 2 Property class 9
BS ISO 22977:2005 Road vehicles. M12 x 1,25 spark-plugs with flat seating and 14 mm bi-hexagon and their cylinder head housing
UNE-EN ISO 12474:2011 Hexagon socket head cap screws with metric fine pitch thread (ISO 12474:2010)
08/30176283 DC : DRAFT JAN 2008 BS ISO 6358-2 - PNEUMATIC FLUID POWER - DETERMINATION OF FLOW-RATE CHARACTERISTICS OF COMPONENTS USING COMPRESSIBLE FLUIDS - PART 2: GENERAL RULES
I.S. EN ISO 898-2:2012 MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 2: NUTS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-2:2012)
MIL-DTL-32546 Base Document:2016 Connectors, Electrical, Circular, for High-Speed Data Bus Transmission, Copper Conductor, General Specification for
13/30277311 DC : 0 BS ISO 17447-2 - ROAD VEHICLES - GLOW-PLUGS WITH CONICAL SEATING AND THEIR CYLINDER HEAD HOUSING - PART 2: BASIC CHARACTERISTICS AND DIMENSIONS FOR CERAMIC-SHEATH-TYPE GLOW-PLUGS
98/714984 DC : DRAFT SEP 1998 ISO/CD 8434-3 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 3: O-RING FACE SEAL FITTINGS
BS EN ISO 10439-1:2015 Petroleum, petrochemical and natural gas industries. Axial and centrifugal compressors and expander-compressors General requirements
BS EN 60255-27:2014 Measuring relays and protection equipment Product safety requirements
03/303649 DC : DRAFT MAR 2003 ISO 6415 - INTERNAL COMBUSTION ENGINES - SPIN-ON FILTERS FOR LUBRICATING OIL - DIMENSIONS
I.S. EN 1515-4:2009 FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC
03/118014 DC : DRAFT DEC 2003 ISO 7121 - METAL BALL VALVES FOR GENERAL-PURPOSE INDUSTRIAL APPLICATIONS
API 617 : 2014 AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS
BS EN ISO 3266 : 2010 FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010+A1:2015)
CAN/CSA-ISO 4903-95 (R2013) Information Technology - Data Communication - 15-Pole DTE/DCE Interface Connector and Contact Number Assignments (Adopted ISO/IEC 4903:1989)
BS 7635(1993) : 1993 AMD 8439 SPECIFICATION FOR SLOTTED CHEESE HEAD SCREWS: PRODUCT GRADE A
BS ISO 15072:2012 Hexagon bolts with flange with metric fine pitch thread. Small series. Product grade A
98/201910 DC : DRAFT APRIL 1998 PREN 50297 - PHOTOELECTRIC CONTROL UNITS FOR ROAD AND STREET LIGHTING
09/30187535 DC : 0 BS EN 13000 - CRANES - MOBILE CRANES
BS 7432:1991 Specification for dental cartridge syringes
BIS IS 2269 : 2006 HEXAGON SOCKET HEAD CAP SCREWS
NF EN ISO 12474 : 2010 HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD
CSA 4.6 : 2007 : INC : ADD A : 2010 : R2012 AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS
DIN EN ISO 7380-1:2011-11 Button head screws - Part 1: Hexagon socket button head screws (ISO 7380-1:2011)
CAN/CSA-ISO/IEC 2593-02 (R2011) Information Technology - Telecommunications and Information Exchange Between Systems - 34-pole DTE/DCE Interface Connector Mateability Dimensions and Contact Number Assignments (Adopted ISO/IEC 2593:2000, fourth edition, 2000-12-15)
ANSI Z21.87 : 2007 : R2012 AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS
ANSI NGV4.6 :1999 MANUALLY OPERATED VALVES FOR NATURAL GAS DISPENSING SYSTEMS
GGG-D-2782 Base Document:1991 DRIVE, POWER, PORTABLE; FOR PIPE AND BOLT THREADING, ELECTRIC (WITH ACCESSORIES)
PREN 14399-8 : DRAFT 2015 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES
PREN 4645-001 : 200P1 AEROSPACE SERIES - CONNECTORS, OPTICAL, CIRCULAR, SINGLE AND MULTIPIN, COUPLED BY THREADED RING, SELF-LOCKING 1,25 MM DIAMETER FERRULE WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 001: TECHNICAL SPECIFICATION
ISO 12149:1999 Bolted bonnet steel globe valves for general-purpose applications
SAE ARP 4945 : 2013 AEROSPACE-SOLENOID VALVE, HYDRAULIC, THREE WAY, TWO POSITION, DIRECT ACTING
API 677 : 2006 : R2010 GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES
BIS IS 12427 : 2001 FASTENERS - THREADED STEEL FASTENERS - HEXAGON HEAD TRANSMISSION TOWER BOLTS - SPECIFICATION
CSA 12.56 : 1999 MANUALLY OPERATED VALVES FOR NATURAL GAS DISPENSING SYSTEMS
API 618 : 2007 : R2016 RECIPROCATING COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV Information technology equipment - Safety - Part 1: General requirements
I.S. EN 62109-1:2010 SAFETY OF POWER CONVERTERS FOR USE IN PHOTOVOLTAIC POWER SYSTEMS - PART 1: GENERAL REQUIREMENTS
PREN 3794 : 200P1 AEROSPACE SERIES - ANAEROBIC POLYMERISABLE COMPOUNDS - TEST METHOD - DETERMINATION OF TORQUE STRENGTH ON THREADED FASTENERS
I.S. EN 61056-2:2012 GENERAL PURPOSE LEAD-ACID BATTERIES (VALVE-REGULATED TYPES) - PART 2: DIMENSIONS, TERMINALS AND MARKING (IEC 61056-2:2012 (EQV) + CORRIGENDUM OCT. 2012 (EQV))
DIN EN 14399-10:2016-01 (Draft) HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD
ISO 2344:1998 Road vehicles M14 x 1,25 spark-plugs with conical seating and their cylinder head housings
IP 309 : 2016 DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - STEPWISE COOLING BATH METHOD
I.S. EN ISO 6149-1:2007 CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 1: PORTS WITH TRUNCATED HOUSING FOR O-RING SEAL
PREN 13012 : DRAFT 2010 PETROL FILLING STATIONS - CONSTRUCTION AND PERFORMANCE OF AUTOMATIC NOZZLES FOR USE ON FUEL DISPENSERS
CSA B78.2 : 0 DIMENSIONING AND TOLERANCING OF TECHNICAL DRAWINGS
ISO 8434-3:2005 Metallic tube connections for fluid power and general use — Part 3: O-ring face seal connectors
ISO 16857:2013 Ships and marine technology — Loose gear of lifting appliances on ships — Shackles
ISO 7180:1986 Pneumatic fluid power Cylinders Bore and port thread sizes
I.S. EN ISO 14581:2013 FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK FLAT HEAD SCREWS (ISO 14581:2013)
BS EN 60065 : 2014 AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014, MODIFIED)
I.S. EN 13000:2010 Cranes - Mobile cranes
BS EN 61730-1 : 2007 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
BS EN 61056-2:2012 General purpose lead-acid batteries (valve-regulated types) Dimensions, terminals and marking
ISO 15071:2011 Hexagon bolts with flange Small series Product grade A
ISO 4144:2003 Pipework Stainless steel fittings threaded in accordance with ISO 7-1
EN 14399-8:2007 High-strength structural bolting assemblies for preloading - Part 8: System HV - Hexagon fit bolt and nut assemblies
BIS IS 4218-3 : 1999 AMD 1 2012 ISO GENERAL PURPOSE METRIC SCREW THREADS - PART 3: BASIC DIMENSIONS
SAE J 1502 : 2013 CONNECTIONS FOR FLUID POWER AND GENERAL USE - HYDRAULIC COUPLINGS - DIAGNOSTIC
SAE J 2593 : 2015 INFORMATION REPORT FOR THE INSTALLATION OF FLUID CONDUCTORS AND CONNECTORS
CSA C22.2 No. 61730-1 : 2011 : INC : AMD 2 : 2015 : R2016 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
NF EN ISO 3266 : 2010 AMD 1 2016 FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES
EN 13012:2012 Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers
CSA C22.2 No. 61730-1 : 2011 : INC : AMD 1 : 2013 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
UNI EN 14399-7 : 2008 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 7: SYSTEM HR - COUNTERSUNK HEAD BOLT AND NUT ASSEMBLIES
ISO 9997:1999 Dental cartridge syringes
I.S. EN ISO 10642:2004 HEXAGON SOCKET COUNTERSUNK HEAD SCREWS (ISO 10642:2004)
I.S. EN 3645-001:2015 AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, SCOOP-PROOF, TRIPLE START THREADED COUPLING, OPERATING TEMPERATURE 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
CSA C22.2 No. 62368-1 : 2014 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
UNE 60719:2017 Fittings for hand operated metallic valves for installations using gaseous fuels.
DIN EN ISO 7719:2016-05 (Draft) PREVAILING TORQUE TYPE ALL-METAL HEXAGON REGULAR NUTS - PROPERTY CLASSES 5, 8 AND 10 (ISO 7719:2012)
DIN EN ISO 10512:2016-05 (Draft) PREVAILING TORQUE TYPE HEXAGON REGULAR NUTS (WITH NON-METALLIC INSERT) WITH METRIC FINE PITCH THREAD - PROPERTY CLASSES 6, 8 AND 10 (ISO 10512:2012)
DIN EN 1591-1:2014-04 FLANGES AND THEIR JOINTS - DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS - PART 1: CALCULATION
DIN EN ISO 7040:2016-05 (Draft) PREVAILING TORQUE TYPE HEXAGON REGULAR NUTS (WITH NON-METALLIC INSERT) - PROPERTY CLASSES 5, 8 AND 10 (ISO 7040:2012)
EN 13617-4:2012 Petrol filling stations - Part 4: Safety requirements for construction and performance of swivels for use on metering pumps and dispensers
DIN EN ISO 7045:2011-12 Pan head screws with type H or type Z cross recess - Product grade A (ISO 7045:2011)
DIN EN ISO 10642:2013-04 HEXAGON SOCKET COUNTERSUNK HEAD SCREWS (ISO 10642:2004 + AMD 1:2012)
UNE-EN 13617-2:2012 Petrol filling stations - Part 2: Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers
UNE-EN ISO 898-1:2015 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013)
UNE-EN 13617-4:2012 Petrol filling stations - Part 4: Safety requirements for construction and performance of swivels for use on metering pumps and dispensers
BS EN 13828:2003 Building valves. Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings. Tests and requirements
BS EN ISO 10442:2002 Petroleum, chemical and gas service industries. Packaged, integrally geared centrifugal air compressors
ISO 4029:2003 Hexagon socket set screws with cup point
BS EN ISO 4762:2004 Hexagon socket head cap screws
BS EN ISO 7045:2011 Pan head screws with type H or type Z cross recess. Product grade A
BS EN ISO 4029:2003 Hexagon socket set screws with cup point
UNE-EN 331:2016 Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings
BS EN 60950:2000 Safety of information technology equipment
BS EN 13000 : 2010 CRANES - MOBILE CRANES
BS EN ISO 8434-4:2000 Metallic tube connections for fluid power and general use 24° cone connectors with O-ring weld-on nipples
BS EN ISO 3506-3:2009 Mechanical properties of corrosion-resistant stainless steel fasteners Set screws and similar fasteners not under tensile stress
BS EN ISO 7719:2012 Prevailing torque type all-metal hexagon regular nuts. Property classes 5, 8 and 10
ISO 3506-2:2009 Mechanical properties of corrosion-resistant stainless steel fasteners Part 2: Nuts
BS EN ISO 10437:2003 Petroleum, petrochemical and natural gas industries. Steam turbines. Special-purpose applications
BS EN ISO 14579:2011 Hexalobular socket head cap screws
UNE-EN ISO 10513:2013 Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread - Property classes 8, 10 and 12 (ISO 10513:2012)
ISO 15547:2000 Petroleum and natural gas industries Plate heat exchangers
I.S. EN ISO 21269:2004 HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD
DIN EN 20898-2:1994-02 MECHANICAL PROPERTIES OF FASTENERS - PART 2: NUTS WITH COARSE PITCH THREAD AND SPECIFIED PROOF LOAD VALUES
I.S. EN ISO 2010:2011 SLOTTED RAISED COUNTERSUNK HEAD SCREWS - PRODUCT GRADE A (ISO 2010:2011)
I.S. EN ISO 7045:2011 PAN HEAD SCREWS WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A (ISO 7045:2011)
EN 50243:2002 Outdoor bushings for 24 kV and 36 kV and for 5 kA and 8 kA, for liquid filled transformers
DIN EN ISO 4029:2004-05 Hexagon socket set screws with cup point (ISO 4029:2003)
DIN EN 13828:2003-12 BUILDING VALVES - MANUALLY OPERATED COPPER ALLOY AND STAINLESS STEEL BALL VALVES FOR POTABLE WATER SUPPLY IN BUILDINGS - TESTS AND REQUIREMENTS
DIN ISO 965-1:1999-11 ISO GENERAL PURPOSE METRIC SCREW THREADS - TOLERANCES - PART 1: PRINCIPLES AND BASIC DATA (ISO 965-1:2013)
EN 61056-2:2012 General purpose lead-acid batteries (valve-regulated types) - Part 2: Dimensions, terminals and marking
EN 60255-27:2014 Measuring relays and protection equipment - Part 27: Product safety requirements
EN 116:2015 Diesel and domestic heating fuels - Determination of cold filter plugging point - Stepwise cooling bath method
ONORM EN 13617-2 : 2012 PETROL FILLING STATIONS - PART 2: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SAFE BREAKS FOR USE ON METERING PUMPS AND DISPENSERS
DIN EN ISO 8434-1:2008-02 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
EN 60950-1:2006/A2:2013 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005/A2:2013, MODIFIED)
DIN EN 14399-8:2008-03 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES
DIN EN 13889:2009-02 FORGED STEEL SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES, GRADE 6 - SAFETY
ONORM EN 16329 : 2013 DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - LINEAR COOLING BATH METHOD
EN ISO 4029:2003 Hexagon socket set screws with cup point (ISO 4029:2003)
ONORM EN ISO 7380-2 : 2011 BUTTON HEAD SCREWS - PART 2: HEXAGON SOCKET BUTTON HEAD SCREWS WITH COLLAR (ISO 7380-2:2011)
ONORM EN ISO 14581 : 2013 FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK FLAT HEAD SCREWS (ISO 14581:2013)
ONORM EN ISO 7380-1 : 2011 BUTTON HEAD SCREWS - PART 1: HEXAGON SOCKET BUTTON HEAD SCREWS (ISO 7380-1:2011)
DIN EN ISO 14581:2014-02 Fasteners - Hexalobular socket countersunk flat head screws (ISO 14581:2013)
DIN ISO 6149-2:1996-11 PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING - PART 2: HEAVY DUTY (S SERIES) STUD ENDS - DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS
10/30165716 DC : 0 BS ISO 898-6 - MECHANICAL PROPERTIES OF FASTENERS - PART 6: NUTS WITH SPECIFIED PROOF LOAD VALUES - FINE PITCH THREAD
13/30277434 DC : 0 BS EN 14399-4 - HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 4: SYSTEM HV - HEXAGON BOLT AND NUT ASSEMBLIES
DIN ISO 6149-1:1996-11 CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING - PART 1: PORTS WITH O-RING SEAL IN TRUNCATED HOUSING
13/30273299 DC : 0 BS ISO 18418-1 - GASOLINE ENGINES - MEDIUM PRESSURE LIQUID FUEL SUPPLY CONNECTIONS - PART 1: 60 DEGREES FEMALE CONE CONNECTORS
BS ISO 6149-3:1993 Connections for fluid power and general use. Ports and stud ends with ISO 261 threads and O-ring sealing Light-duty (L series) stud ends. Dimensions, design, test methods and requirements
09/30203245 DC : 0 BS ISO 7380-2 - HEXAGON SOCKET BUTTON HEAD SCREWS - PART 2: BUTTON HEAD WITH COLLAR (HEAD SHAPE B)
DIN EN ISO 9168:2009-10 DENTISTRY - HOSE CONNECTORS FOR AIR DRIVEN DENTAL HANDPIECES
BS ISO 6020-1:2007 Hydraulic fluid power. Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series Medium series
I.S. EN 24034:1992 HEXAGON NUTS - PRODUCT GRADE C
BS 4219-1:1985 Slotted set screws: metric series Specification for slotted set screws with flat point
12/30258456 DC : 0 BS EN 60950-1:2006/FPRAE:2011 - INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
BS 4219-2:1985 Slotted set screws: metric series Specification for slotted set screws with cone point
I.S. EN 24018:1992 HEXAGONAL HEAD SCREWS - PRODUCT GRADES C
I.S. EN ISO 7380-1:2011 BUTTON HEAD SCREWS - PART 1: HEXAGON SOCKET BUTTON HEAD SCREWS
16/30353142 DC : 0 BS EN 3645-001 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, SCOOP-PROOF, TRIPLE START THREADED COUPLING, OPERATING TEMPERATURE 175 DEGRES C OR 200 DEGRES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
BS ISO 2705:2006 Road vehicles. M12 x 1,25 spark plugs with flat seating and their cylinder head housings
ISO 3903:2012 Ships and marine technology — Ships' ordinary rectangular windows
ISO 10945:1994 Hydraulic fluid power Gas-loaded accumulators Dimensions of gas ports
BS ISO 16857:2013 Ships and marine technology. Loose gear of lifting appliances on ships. Shackles
09/30208217 DC : 0 BS ISO 1207 - SLOTTED CHEESE HEAD SCREWS - PRODUCT GRADE A
BS 6913-14:1997 Operation and maintenance of earth-moving machinery Specification for lubrication fittings. Grease-gun nozzles
BS ISO 7720:2012 Prevailing torque type all-metal hexagon nuts, style 2. Property class 9
05/30135789 DC : DRAFT JUL 2005 EN ISO 8434-1 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREES CONE CONNECTORS
BS ISO 8434-6:2009 Metallic tube connections for fluid power and general use 60° cone connectors with or without O-ring
API 616 : 2011 GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
BS ISO 18418-1:2014 Gasoline engines. Medium pressure liquid fuel supply connections 60° female cone connectors
15/30328131 DC : 0 BS EN 3660-001 - AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 001: TECHNICAL SPECIFICATION
14/30287198 DC : 0 BS ISO 15171-2 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - HYDRAULIC COUPLINGS FOR DIAGNOSTIC PURPOSES - PART 2: COUPLING FOR CONNECTION UNDER PRESSURE
BS ISO 13948-1:2015 Diesel engines. Fuel injection pumps and fuel injector low-pressure connections Threaded connections
07/30166055 DC : 0 BS EN 14399-10 - HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD
11/30232899 DC : 0 BS ISO 6162-2 - HYDRAULIC FLUID POWER - FLANGE CONNECTIONS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 2: FLANGE CONNECTORS, PORTS AND MOUNTING SURFACES FOR USE AT A PRESSURE OF 42 MPA (420 BAR), DN 13 TO DN 76
BS ISO 2344:1998 Road vehicles. M14 x 1,25 spark plugs with conical seating and their cylinder head housings
12/30236938 DC : 0 BS ISO 28741 - ROAD VEHICLES - SPARK-PLUGS AND THEIR CYLINDER HEAD HOUSINGS - BASIC CHARACTERISTICS AND DIMENSIONS
API 676 REDLINE : 2009 POSITIVE DISPLACEMENT PUMPS - ROTARY
BS 7201-2:1995 Hydraulic fluid power. Gas loaded accumulators Dimensions of gas ports
BS ISO 6149-4 : 2006 CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 4: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR EXTERNAL HEX AND INTERNAL HEX PORT PLUGS
UNI EN 1515-4 : 2010 FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC
11/30250287 DC : 0 BS EN 60255-27 - MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 27: PRODUCT SAFETY REQUIREMENTS
CSA Z10524 : 2002 PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW-METERING DEVICES FOR MEDICAL GAS SYSTEMS
12/30264722 DC : 0 BS ISO 965-1 - ISO GENERAL-PURPOSE METRIC SCREW THREADS - TOLERANCES - PART 1: PRINCIPLES AND BASIC DATA
DIN EN ISO 9168 E : 2009 DENTISTRY - HOSE CONNECTORS FOR AIR DRIVEN DENTAL HANDPIECES
03/105149 DC : DRAFT MAR 2003 PREN 14620-2 - DESIGN AND MANUFACTURE OF SITE BUILT, VERTICAL, CYLINDRICAL, FLAT-BOTTOMED STEEL TANKS FOR THE STORAGE OF REFRIGERATED, LIQUEFIED GASES WITH OPERATING TEMPERATURES BETWEEN -5 DEGREES C AND -165 DEGREES C - PART 2: METALLIC COMPONENTS
CSA ISO/IEC 2593:2002 Information Technology - Telecommunications and Information Exchange Between Systems - 34-pole DTE/DCE Interface Connector Mateability Dimensions and Contact Number Assignments (Adopted ISO/IEC 2593:2000, fourth edition, 2000-12-15)
BS ISO 7183:2007 Compressed-air dryers. Specifications and testing
MIL C 38999 : J CONNECTOR, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT (BAYONET THREADED & BREECH COUPLING) ENVIRONMENT RESISTANT, REMOVABLE CRIMP & HERMETIC SOLDER CONTACTS
ISO 8470:2006 Road vehicles M14 x 1,25 spark-plugs with flat seating and 16 mm hexagon and their cylinder head housings
BIS IS 8886-1 : 2012(R2017) SHIPS' ORDINARY RECTANGULAR WINDOWS - SPECIFICATION - PART 1: CLASSIFICATION, DIMENSIONS, MATERIALS, MARKING AND DESIGNATION
SAE AS 29600 : 2017 CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, COMPOSITE, HIGH DENSITY, QUICK COUPLING, ENVIRONMENT RESISTANT, REMOVABLE CRIMP CONTACTS ASSOCIATED HARDWARE, GENERAL SPECIFICATION FOR
BS ISO 3019-2:2001 Hydraulic fluid power. Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors Metric series
MIL-DTL-38999 Revision M:2015 Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded or Breech Coupling), Environment Resistant with Crimp Removable Contacts or Hermetically Sealed with Fixed, Solderable Contacts, General Specification for
03/308870 DC : DRAFT MAY 2003 ISO 2974 - DIESEL ENGINES - HIGH-PRESSURE FUEL INJECTION PIPE END-CONNECTIONS WITH 60 DEGREE FEMALE CONE
I.S. EN 60255-27:2014 MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 27: PRODUCT SAFETY REQUIREMENTS
I.S. EN 14399-10:2009 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD
DIN EN ISO 7380-2:2011-11 Button head screws - Part 2: Hexagon socket button head screws with collar (ISO 7380-2:2011)
ISO 7041:2012 Prevailing torque type hexagon nuts (with non-metallic insert), style 2 Property classes 9 and 12
PREN 3660-001 : 200P3 AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 001: TECHNICAL SPECIFICATION
UNI EN ISO 14582 : 2014 FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK HEAD SCREWS, HIGH HEAD
CSA 4.6 : 2007 : INC : ADD A : 2010 : R2016 AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS
ANSI NGV4.6 : 1999 : R2014 MANUALLY OPERATED VALVES FOR NATURAL GAS DISPENSING SYSTEMS
UNE-EN 14399-4:2016 High-strength structural bolting assemblies for preloading - Part 4: System HV - Hexagon bolt and nut assemblies
NF EN ISO 7380-2 : 2011 BUTTON HEAD SCREWS - PART 2: HEXAGON SOCKET BUTTON HEAD SCREWS WITH COLLAR
API 672 : 2004 PACKAGED, INTEGRALLY GEARED CENTRIFUGAL AIR COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
ISO 2974:2018 Diesel engines — 60° female cones for high-pressure fuel injection components
ISO 14661:2000 Thermal turbines for industrial applications (steam turbines, gas expansion turbines) General requirements
API 611 : 2008 GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
ANSI Z21.87 : 2007 : INC : ADD A : 2010 : R2012 AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS
ISO 6415:2005 Internal combustion engines — Spin-on filters for lubricating oil — Dimensions
I.S. EN ISO 7380-2:2011 BUTTON HEAD SCREWS - PART 2: HEXAGON SOCKET BUTTON HEAD SCREWS WITH COLLAR
CSA C22.2 No. 61730-1 : 2011 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
API 674 : 2010 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
API 674 : 2010 : ERR 1 : 2014 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
BS EN 13445-3 : 2014 UNFIRED PRESSURE VESSELS - PART 3: DESIGN
NF EN 1515-4 : 2010 FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC
BS EN ISO 7380-2:2011 Button head screws Hexagon socket button head screws with collar
I.S. EN ISO 12474:2010 HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD
I.S. EN 60191-1:2007 MECHANICAL STANDARDIZATION OF SEMICONDUCTOR DEVICES - PART 1: GENERAL RULES FOR THE PREPARATION OF OUTLINE DRAWINGS OF DISCRETE DEVICES
ISO 6302:1993 Earth-moving machinery Drain, fill and level plugs
ISO 2704:1998 Road vehicles M10 x 1 spark-plugs with flat seating and their cylinder head housings
ISO 8678:1988 Cup head square neck bolts with small head and short neck Product grade B
ISO 6149-1:2006 Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 1: Ports with truncated housing for O-ring seal
ISO 9624:1997 Thermoplastics pipes for fluids under pressure Mating dimensions of flange adapters and loose backing flanges
PREN ISO 1207 : DRAFT 2009 SLOTTED CHEESE HEAD SCREWS - PRODUCT GRADE A
PREN 14399-10 : DRAFT 2015 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD
I.S. EN 50243:2002 OUTDOOR BUSHINGS FOR 24 KV AND 36 KV AND FOR 5 KA AND 8 KA, FOR LIQUID FILLED TRANSFORMERS
UNI EN 14399-10 : 2009 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD
ISO 2705:2006 Road vehicles M12 x 1,25 spark-plugs with flat seating and their cylinder head housings
UNE-EN ISO 6149-4:2017 Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs (ISO 6149-4:2017)
NF EN ISO 4766 : 2011 SLOTTED SET SCREWS WITH FLAT POINT
ONORM EN 14399-10 : JUN 2009 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD
SAE J 518/3 : 2015 HYDRAULIC FLANGE CLAMPS, 2-SCREW FLANGE CONNECTION TO BE USED WITH SAE J518-1, (CODE 61) CONNECTIONS WHERE ONLY LOW PRESSURE IS REQUIRED
ISO 7043:2012 Prevailing torque type hexagon nuts with flange (with non-metallic insert), style 2 — Product grades A and B
UNI EN ISO 7048 : 2011 CROSS-RECESSED CHEESE HEAD SCREWS
UNI ISO 8434-2 : 2012 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 2: 37 DEGREE FLARED CONNECTORS
NF EN 60950-1 : 2006 AMD 2 2014 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
DIN EN ISO 8434-1:2016-10 (Draft) METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
EN 14399-10:2018 High-strength structural bolting assemblies for preloading - Part 10: System HRC - Bolt and nut assemblies with calibrated preload
EN ISO 6149-4:2017 CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 4: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR EXTERNAL HEX AND INTERNAL HEX PORT PLUGS (ISO 6149-4:2017)
UNI EN ISO 15245-1 : 2013 GAS CYLINDERS - PARALLEL THREADS FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATION
BS EN ISO 8434-1:2007 Metallic tube connections for fluid power and general use 24 degree cone connectors
ISO 7183:2007 Compressed-air dryers Specifications and testing
DIN EN ISO 3506-3:2010-04 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009)
DIN EN 13000:2014-11 CRANES - MOBILE CRANES
DIN EN ISO 17292:2016-05 METAL BALL VALVES FOR PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES (ISO 17292:2015)
DIN EN 13617-4:2012-05 Petrol filling stations - Part 4: Safety requirements for construction and performance of swivels for use on metering pumps and dispensers
DIN EN ISO 898-1:2013-05 MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013)
DIN EN ISO 8765:2011-06 Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:2011)
DIN EN ISO 898-5:2012-09 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012)
BS EN ISO 9409-1:2004 Manipulating industrial robots. Mechanical interfaces Plates
BS EN ISO 3506-1:2009 Mechanical properties of corrosion-resistant stainless steel fasteners Bolts, screws and studs
BS EN ISO 13709:2003 Centrifugal pumps for petroleum, petrochemical and natural gas industries
UNE-EN ISO 1207:2011 Slotted cheese head screws - Product grade A (ISO 1207:2011)
BS EN ISO 4027:2003 Hexagon socket set screws with cone point
UNE-EN ISO 14584:2011 Hexalobular socket raised countersunk head screws (ISO 14584:2011)
BS EN ISO 9974-1:2000 Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Threaded ports
UNE-EN ISO 10512:2013 Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread - Property classes 6, 8 and 10 (ISO 10512:2012)
UNE-EN 61056-2:2013 General purpose lead-acid batteries (valve-regulated types) - Part 2: Dimensions, terminals and marking
BS EN ISO 3506-2:2009 Mechanical properties of corrosion-resistant stainless steel fasteners Nuts
ISO 17292:2015 Metal ball valves for petroleum, petrochemical and allied industries
ONORM EN ISO 10642 : 2013 HEXAGON SOCKET COUNTERSUNK HEAD SCREWS (ISO 10642:2004+AMD 1:2012)
ISO 10642:2004 Hexagon socket countersunk head screws
BS EN 1591-1:2013 Flanges and their joints. Design rules for gasketed circular flange connections Calculation
UNE-EN ISO 7046-1:2012 Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 1: Steel of property class 4.8 (ISO 7046-1:2011)
UNE-EN ISO 2010:2012 Slotted raised countersunk head screws - Product grade A (ISO 2010:2011)
BS EN ISO 7047:2011 Raised countersunk head screws (common head style) with type H or type Z cross recess. Product grade A
EN 60065:2014/AC:2017-01 AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014/COR2:2016)
I.S. EN ISO 4762:2004 HEXAGON SOCKET HEAD CAP SCREWS
I.S. EN 14399-3:2015 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 3: SYSTEM HR - HEXAGON BOLT AND NUT ASSEMBLIES
I.S. EN 14399-4:2015 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 4: SYSTEM HV - HEXAGON BOLT AND NUT ASSEMBLIES
I.S. EN ISO 7719:2012 PREVAILING TORQUE TYPE ALL-METAL HEXAGON REGULAR NUTS - PROPERTY CLASSES 5, 8 AND 10 (ISO 7719:2012)
I.S. EN ISO 14583:2011 HEXALOBULAR SOCKET PAN HEAD SCREWS
I.S. EN 13012:2012 PETROL FILLING STATIONS - CONSTRUCTION AND PERFORMANCE OF AUTOMATIC NOZZLES FOR USE ON FUEL DISPENSERS
I.S. EN ISO 10440-1:2007 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY TYPE POSITIVE-DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS
DIN EN ISO 7046-2:2011-12 Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws (ISO 7046-2:2011)
DIN EN ISO 6149-1:2007-05 CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 1: PORTS WITH TRUNCATED HOUSING FOR O-RING SEAL
I.S. EN 13617-4:2012 PETROL FILLING STATIONS - PART 4: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SWIVELS FOR USE ON METERING PUMPS AND DISPENSERS
DIN EN ISO 7380:2004-05 HEXAGON SOCKET BUTTON HEAD SCREWS
I.S. EN ISO 7042:2012 PREVAILING TORQUE TYPE ALL-METAL HEXAGON HIGH NUTS - PROPERTY CLASSES 5, 8, 10 AND 12 (ISO 7042:2012)
DIN EN 24032:1992-02 HEXAGON NUTS, STYLE 1 - PRODUCT GRADES A AND B
DIN EN 24014:1992-02 HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B
DIN EN 24036:1992-02 HEXAGON THIN NUTS - PRODUCT GRADE B (UNCHAMFERED)
DIN EN 24035:1992-02 HEXAGON THIN NUTS (CHAMFERED) - PRODUCT GRADES A AND B
I.S. EN 13889:2003 FORGED STEEL SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES - GRADE 6 - SAFETY
I.S. EN ISO 10512:2012 PREVAILING TORQUE TYPE HEXAGON REGULAR NUTS (WITH NON-METALLIC INSERT) WITH METRIC FINE PITCH THREAD - PROPERTY CLASSES 6, 8 AND 10 (ISO 10512:2012)
I.S. EN ISO 2320:2015 FASTENERS - PREVAILING TORQUE STEEL NUTS - FUNCTIONAL PROPERTIES (ISO 2320:2015)
I.S. EN 331:2015 MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS
I.S. EN ISO 7047:2011 RAISED COUNTERSUNK HEAD SCREWS (COMMON HEAD STYLE) WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A (ISO 7047:2011)
I.S. EN ISO 7046-2:2011 COUNTERSUNK FLAT HEAD SCREWS (COMMON HEAD STYLE) WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A - PART 2: STEEL SCREWS OF PROPERTY CLASS 8.8, STAINLESS STEEL SCREWS AND NON-FERROUS METAL SCREWS (ISO 7046-2:2011)
I.S. EN ISO 14580:2011 HEXALOBULAR SOCKET CHEESE HEAD SCREWS
I.S. EN ISO 10511:2012 PREVAILING TORQUE TYPE HEXAGON THIN NUTS (WITH NON-METALLIC INSERT) (ISO 10511:2012)
I.S. EN ISO 10513:2012 PREVAILING TORQUE TYPE ALL-METAL HEXAGON HIGH NUTS WITH METRIC FINE PITCH THREAD - PROPERTY CLASSES 8, 10 AND 12 (ISO 10513:2012)
I.S. EN ISO 14579:2011 HEXALOBULAR SOCKET HEAD CAP SCREWS
I.S. EN ISO 898-1:2013 MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013)
I.S. EN 13617-2:2012 PETROL FILLING STATIONS - PART 2: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SAFE BREAKS FOR USE ON METERING PUMPS AND DISPENSERS
I.S. EN ISO 1580:2011 SLOTTED PAN HEAD SCREWS - PRODUCT GRADE A (ISO 1580:2011)
I.S. EN ISO 9409-1:2004 MANIPULATING INDUSTRIAL ROBOTS - MECHANICAL INTERFACES - PART 1: PLATES
DIN ISO 724:2010-01 ISO general purpose metric screw threads - Basic dimensions (ISO 724:1993 + Cor. 1:2009)
DIN EN 24034:1992-02 HEXAGON NUTS - PRODUCT GRADES C
DIN EN ISO 7046-1:2011-12 Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 1: Steel screws of property class 4.8 (ISO 7046-1:2011)
I.S. EN ISO 8765:2011 HEXAGON HEAD BOLTS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
DIN EN 14399-3:2015-04 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 3: SYSTEM HR - HEXAGON BOLT AND NUT ASSEMBLIES
I.S. EN ISO 7040:2012 PREVAILING TORQUE TYPE HEXAGON REGULAR NUTS (WITH NON-METALLIC INSERT) - PROPERTY CLASSES 5, 8 AND 10 (ISO 7040:2012)
I.S. EN ISO 14584:2011 HEXALOBULAR SOCKET RAISED COUNTERSUNK HEAD SCREWS
I.S. EN ISO 7048:2011 CROSS-RECESSED CHEESE HEAD SCREWS
I.S. EN ISO 3506-3:2009 MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 3: SET SCREWS AND SIMILAR FASTENERS NOT UNDER TENSILE STRESS
DIN EN 24017:1992-02 HEXAGON HEAD SCREWS - PRODUCT GRADES A AND B
I.S. EN ISO 898-5:2012 MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 5: SET SCREWS AND SIMILAR THREADED FASTENERS WITH SPECIFIED HARDNESS CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-5:2012)
I.S. EN 1591-1:2013 FLANGES AND THEIR JOINTS - DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS - PART 1: CALCULATION
I.S. EN ISO 1207:2011 SLOTTED CHEESE HEAD SCREWS - PRODUCT GRADE A
I.S. EN ISO 17292:2015 METAL BALL VALVES FOR PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES (ISO 17292:2015)
I.S. EN ISO 2009:2011 SLOTTED COUNTERSUNK FLAT HEAD SCREWS - PRODUCT GRADE A (ISO 2009:2011)
I.S. EN ISO 7046-1:2011 COUNTERSUNK FLAT HEAD SCREWS (COMMON HEAD STYLE) WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A - PART 1: STEEL OF PROPERTY CLASS 4.8 (ISO 7046-1:2011)
DIN EN 24018:1992-02 HEXAGON HEAD SCREWS - PRODUCT GRADE C
DIN EN ISO 9409-1:1997-06 MANIPULATING INDUSTRIAL ROBOTS - MECHANICAL INTERACES - PART 1: PLATES
DIN EN ISO 9409-2:2003-10 MANIPULATING INDUSTRIAL ROBOTS - MECHANICAL INTERFACES - PART 2: SHAFTS
VDI 3334:2015-03 Machining of internal threads
BS 4168-3:1994 Hexagon socket screws and wrench keys: metric series Specification for hexagon socket set screws with cone point
BIS IS 13252-1 : 2010 AMD 1 2013 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
BS 4168-5:1994 Hexagon socket screws and wrench keys: metric series Specification for hexagon socket set screws with cup point
ASME B1.21M : 1997 : R2008 METRIC SCREW THREADS - MJ PROFILE
NF EN ISO 8765 : 2011 HEXAGON HEAD BOLTS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
ASME B1.21M : 1997 METRIC SCREW THREADS - MJ PROFILE
BS 4168-2:1994 Hexagon socket screws and wrench keys: metric series Specification for hexagon socket set screws with flat point
ONORM EN ISO 8765 : 2011 HEXAGON HEAD BOLTS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
ASME B1.21M : 1997 : R2013 METRIC SCREW THREADS - MJ PROFILE
BIS IS 13252 : 2003 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - GENERAL REQUIREMENTS
BS 4168-4:1994 Hexagon socket screws and wrench keys: metric series Specification for hexagon socket set screws with dog point
BS AU 262-3:1997 Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing M 10 glow plugs
10/30219402 DC : 0 BS EN 13012 - PETROL FILLING STATIONS - CONSTRUCTION AND PERFORMANCE OF AUTOMATIC NOZZLES FOR USE ON FUEL DISPENSERS
12/30239877 DC : 0 BS EN 60065 ED 8.0 - AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
BS ISO 1919:1998 Road vehicles. M14 x 1,25 spark plugs with flat seating and their cylinder head housings
I.S. EN ISO 8434-1:2007 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
11/30234861 DC : 0 BS ISO 3903 - SHIPS AND MARINE TECHNOLOGY - SHIPS' ORDINARY RECTANGULAR WINDOWS
CEI EN 60191-1 : 2008 MECHANICAL STANDARDIZATION OF SEMICONDUCTOR DEVICES - PART 1: GENERAL RULES FOR THE PREPARATION OF OUTLINE DRAWINGS OF DISCRETE DEVICES
API 685 REDLINE : 2011 SEALLESS CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL, AND GAS INDUSTRY PROCESS SERVICE
09/30199060 DC : 0 BS ISO 11926-2 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 263 INCH THREADS AND O-RING SEALING - PART 2: HEAVY-DUTY (S SERIES) STUD ENDS
BS ISO 4162:2012 Hexagon bolts with flange. Small series. Product grade A with driving feature of product grade B
ISO 7299-2:2009 Diesel engines End-mounting flanges for pumps Part 2: High-pressure supply pumps for common rail fuel injection systems
I.S. EN 24035:1992 HEXAGON THIN NUTS (CHAMFERED) - PRODUCT GRADES A AND B
BS 2000-309(2015) : 2015 DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - STEPWISE COOLING BATH METHOD
DIN EN ISO 14581 E : 2014 FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK FLAT HEAD SCREWS (ISO 14581:2013)
11/30234855 DC : DRAFT APR 2011 BS ISO 1751 - SHIPS AND MARINE TECHNOLOGY - SHIPS'SIDE SCUTTLES
13/30277307 DC : 0 BS ISO 17447-1 - ROAD VEHICLES - GLOW-PLUGS WITH CONICAL SEATING AND THEIR CYLINDER HEAD HOUSING - PART 1: BASIC CHARACTERISTICS AND DIMENSIONS FOR METAL-SHEATH-TYPE GLOW-PLUGS
09/30208236 DC : 0 BS ISO 4766 - SLOTTED SET SCREWS WITH FLAT POINT
I.S. EN ISO 898-6:1996 MECHANICAL PROPERTIES OF FASTENERS - PART 6: NUTS WITH SPECIFIED PROOF LOAD VALUES - FINE PITCH THREAD
17/30368045 DC : 0 PREN 4857-1 - AEROSPACE SERIES- MINIATURE CONNECTORS, HIGH DENSITY, ELECTRICAL, CIRCULAR, SCOOP-PROOF, TRIPLE START THREADED COUPLING, OPERATING TEMPERATURES 175 DEGREES C CONTINUOUS OR 200 DEGREES C CONTINUOUS - SHELL SIZES: 05 TO 07 - PART 001: TECHNICAL SPECIFICATION
BS EN ISO 12474:2010 Hexagon socket head cap screws with metric fine pitch thread
BS ISO 7121:2016 Steel ball valves for general-purpose industrial applications
ISO 6550-3:2013 Road vehicles Sheath-type glow-plugs with conical seating and their cylinder head housing Part 3: M10 glow-plugs
BS ISO 9974-4:2006 Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Dimensions, design, test methods and requirements for external hex and internal hex port plugs
11/30251420 DC : 0 BS EN 16329 - DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - LINEAR COOLING BATH METHOD
UNI EN ISO 4766 : 2012 SLOTTED SET SCREWS WITH FLAT POINT
BS ISO 7299-2:2009 Diesel engines. End-mounting flanges for pumps High-pressure supply pumps for common rail fuel injection systems
MIL-DTL-83538 Revision D:2006 CONNECTORS AND ACCESSORIES, ELECTRICAL, CIRCULAR, UMBILICAL, ENVIRONMENT RESISTANT, REMOVABLE CRIMP CONTACTS FOR MIL-STD-1760 APPLICATIONS (METRIC), GENERAL SPECIFICATION FOR
16/30313948 DC : 0 BS ISO 18139 - SHIPS AND MARINE TECHNOLOGY - GLOBE VALVES FOR USE IN LOW TEMPERATURE APPLICATIONS - DESIGN AND TESTING REQUIREMENTS
04/30098930 DC : DRAFT FEB 2004 ISO 6550-4 - ROAD VEHICLES - SHEATH-TYPE GLOW-PLUGS WITH CONICAL SEATING AND THEIR CYLINDER HEAD HOUSING - PART 4: M8 X 1 GLOW PLUGS (N983)
04/30114086 DC : DRAFT JUL 2004 EN ISO 10440-1 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS (OIL-FREE)
15/30322555 DC : 0 BS ISO 7121 - STEEL BALL VALVES FOR GENERAL-PURPOSE INDUSTRIAL APPLICATIONS
PREN ISO 4766 : DRAFT 2009 SLOTTED SET SCREWS WITH FLAT POINT
BS ISO 9669:1990 Series 1 freight containers. Interface connections for tank containers
04/30124527 DC : DRAFT OCT 2004 ISO/DIS 6149-3 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 3: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR LIGHT-DUTY (L SERIES) STUD ENDS
07/30155222 DC : 0 BS ISO 28741 - ROAD VEHICLES - SPARK-PLUGS AND THEIR CYLINDER HEAD HOUSINGS - BASIC CHARACTERISTICS AND DIMENSIONS
BS 7796:1995 Specification for hydraulic fluid power. Four-screw split-flange connections for use at pressures of 2,5 MPa to 40 MPa (25 bar to 400 bar). Type 1 metric series and type 11 inch series
12/30247796 DC : DRAFT JAN 2012 BS EN 1591-1 - FLANGES AND THEIR JOINTS - DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS - PART 1: CALCULATIONS
ONORM EN 1515-4 : 2010 FLANSCHE UND IHRE VERBINDUNGEN - SCHRAUBEN UND MUTTERN - TEIL 4: AUSWAHL VON SCHRAUBEN UND MUTTERN ZUR ANWENDUNG IM GUELTIGKEITSBEREICH DER DRUCKGERAETERICHTLINIE 97/23/EG
EN ISO 15245-1:2001/A1:2013 GAS CYLINDERS - PARALLEL THREADS FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATION (ISO 15245-1:2001/AMD 1:2013)
UNE-EN ISO 9168:2010 Dentistry - Hose connectors for air driven dental handpieces (ISO 9168:2009)
11/30238881 DC : 0 BS ISO 2974 - DIESEL ENGINES - 60 DEGREES FEMALE CONES FOR HIGH-PRESSURE FUEL INJECTION COMPONENTS
15/30332551 DC : 0 BS EN 14399-10 - HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD
09/30199057 DC : 0 BS ISO 11926-1 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 263 UN AND UNF THREADS AND O-RING SEALING - PART 1: PORTS WITH TRUNCATED HOUSING FOR O-RING SEAL
BS ISO 17447-2:2015 Road Vehicles. Glow-plugs with conical seating and their cylinder head housing Basic characteristics and dimensions for ceramic-sheath-type glow-plugs
09/30185734 DC : 0 BS EN 116/BS 2000-309 - DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT
10/30165712 DC : 0 BS ISO 898-2 - MECHANICAL PROPERTIES OF FASTENERS - PART 2: NUTS WITH SPECIFIED PROOF LOAD VALUES; COARSE THREAD
UNI ISO 8434-6 : 2012 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 6: 60 DEGREE CONE CONNECTORS WITH OR WITHOUT O-RING
BS EN 50243:2002 Outdoor bushings for 24 kV and 36 kV and for 5 kA and 8 kA, for liquid filled transformers
BS ISO 18139:2017 Ships and marine technology. Globe valves for use in low temperature applications. Design and testing requirements
BS ISO 14661:2000 Thermal turbines for industrial applications (steam turbines, gas expansion turbines). General requirements
15/30329002 DC : 0 BS ISO 18418-1 - GASOLINE ENGINES - MEDIUM PRESSURE LIQUID FUEL SUPPLY CONNECTIONS - PART 1: 60 DEGREES FEMALE CONE CONNECTORS
PREN 14399-3 : DRAFT 2013 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 3: SYSTEM HR - HEXAGON BOLT AND NUT ASSEMBLIES
BS 3951-2.6(1992) : 1992 FREIGHT CONTAINERS - SPECIFICATION FOR TESTING OF SERIES 1 FREIGHT CONTAINERS - INTERFACE CONNECTIONS FOR TANK CONTAINERS
BS ISO 14508:2006 Road vehicles. Spark plugs. Terminals
BS 3934-1:1992 Mechanical standardization of semiconductor devices Recommendations for the preparation of drawings of semiconductor devices
BS EN ISO 898-2:2012 Mechanical properties of fasteners made of carbon steel and alloy steel Nuts with specified property classes. Coarse thread and fine pitch thread
PREN 3645-001 : 200P2 AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, SCOOP-PROOF, TRIPLE START THREADED COUPLING, OPERATING TEMPERATURE 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
DIN 13-12:1988-10 ISO METRIC SCREW THREADS - 1 MM TO 300 MM DIAMETER COARSE AND FINE PITCH THREADS - SELECTED DIAMETERS AND PITCHES
ISO 2347:1994 Road vehicles M14 x 1,25 compact spark-plugs with conical seating and their cylinder head housing
ANSI Z21.87 :2007 AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS
API 611 : 2008 : R2014 GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
CSA HGV 4.6 : 2013 MANUALLY OPERATED VALVES FOR USE IN GASEOUS HYDROGEN VEHICLE FUELING STATIONS
API STD 541 : 2014 FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 375 KW (500 HORSEPOWER) AND LARGER
ISO 3253:1998 Gas welding equipment Hose connections for equipment for welding, cutting and allied processes
API 613:2003 SPECIAL PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES
I.S. EN ISO 14582:2013 FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK HEAD SCREWS, HIGH HEAD (ISO 14582:2013)
I.S. EN 13445-3:2014 UNFIRED PRESSURE VESSELS - PART 3: DESIGN
ISO 4162:2012 Hexagon bolts with flange Small series Product grade A with driving feature of product grade B
I.S. EN ISO 10439-1:2015 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS - PART 1: GENERAL REQUIREMENTS (ISO 10439-1:2015)
ISO 9974-4:2016 Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
CEI EN 60255-27 : 2014 MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 27: PRODUCT SAFETY REQUIREMENTS
ISO 16030:2001 Pneumatic fluid power — Connections — Ports and stud ends
EN 14399-7:2007 High-strength structural bolting assemblies for preloading - Part 7: System HR - Countersunk head bolt and nut assemblies
ISO 2345:1994 Road vehicles M18 x 1,5 spark-plugs with conical seating and their cylinder head housing
UNE-EN 16329:2013 Diesel and domestic heating fuels - Determination of cold filter plugging point - Linear cooling bath method
UNE-EN ISO 898-2:2013 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012)
EN IEC 62688:2018 Concentrator photovoltaic (CPV) modules and assemblies - Safety qualification
UNE-EN ISO 4766:2012 Slotted set screws with flat point (ISO 4766:2011)
BS ISO 10945:1994 Hydraulic fluid power. Gas-loaded accumulators. Dimensions of gas ports
ISO 12125:2012 Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread, style 2 — Product grades A and B
UNI EN ISO 8434-1 : 2007 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
EN 13445-3:2014/A4:2018 UNFIRED PRESSURE VESSELS - PART 3: DESIGN
I.S. EN 60950-1:2006 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005 (MOD))
ISO 6164:1994 Hydraulic fluid power Four-screw, one-piece square-flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar)
SAE J 518/2 : 2017 HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, 4-SCREW FLANGE CONNECTION - PART 2: 42 MPA (CODE 62)
UNI EN ISO 7380-2 : 2012 BUTTON HEAD SCREWS - PART 2: HEXAGON SOCKET BUTTON HEAD SCREWS WITH COLLAR
UNI EN ISO 12474 : 2010 HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD
ISO 6020-1:2007 Hydraulic fluid power — Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series — Part 1: Medium series
API 612 : 2014 PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES - STEAM TURBINES - SPECIAL-PURPOSE APPLICATIONS
EN ISO 6149-1:2007 Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring seal (ISO 6149-1:2007)
EN ISO 8434-1:2007/AC:2009 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
ISO 4762:2004 Hexagon socket head cap screws
ISO 4903:1989 Information technology Data communication 15-pole DTE/DCE interface connector and contact number assignments
ONORM EN 3645-001 : 2015 AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, SCOOP-PROOF, TRIPLE START THREADED COUPLING, OPERATING TEMPERATURE 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
ISO 12151-4:2007 Connections for hydraulic fluid power and general use Hose fittings Part 4: Hose fittings with ISO 6149 metric stud ends
ISO 8434-6:2009 Metallic tube connections for fluid power and general use — Part 6: 60 degree cone connectors with or without O-ring
ISO 7380:2004 Hexagon socket button head screws
ISO 10663:2012 Hexagon nuts with flange, style 2 — Fine pitch thread
ISO 10303-214:2010 Industrial automation systems and integration Product data representation and exchange Part 214: Application protocol: Core data for automotive mechanical design processes
ISO 7412:1984 Hexagon bolts for high-strength structural bolting with large width across flats (short thread length) Product grade C Property classes 8.8 and 10.9
ISO 13948-1:2015 Diesel engines Fuel injection pumps and fuel injector low-pressure connections Part 1: Threaded connections
DIN EN ISO 7042:2016-05 (Draft) PREVAILING TORQUE TYPE ALL-METAL HEXAGON HIGH NUTS - PROPERTY CLASSES 5, 8, 10 AND 12 (ISO 7042:2012)
DIN EN 13617-2:2012-05 Petrol filling stations - Part 2: Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers
BS EN ISO 9997:2000 Dental cartridge syringes
DIN EN 3660-001:2016-04 AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 001: TECHNICAL SPECIFICATION
DIN EN ISO 7047:2011-12 Raised countersunk head screws (common head style) with type H or type Z cross recess - Product grade A (ISO 7047:2011)
DIN EN ISO 7048:2011-07 Cross-recessed cheese head screws (ISO 7048:2011)
DIN EN ISO 15245-1:2013-11 Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification (ISO 15245-1:2001 + Amd 1:2013) (includes Amendment A1:2013)
DIN EN ISO 8765 E : 2011 HEXAGON HEAD BOLTS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
DIN EN ISO 4762:2004-06 Hexagon socket head cap screws (ISO 4762:2004)
DIN EN 331:2016-04 MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS
DIN EN ISO 1580:2011-12 Slotted pan head screws - Product grade A (ISO 1580:2011)
ISO 4028:2003 Hexagon socket set screws with dog point
BS EN 13617-4:2012 Petrol filling stations Safety requirements for construction and performance of swivels for use on metering pumps and dispensers
BS EN 13889 : 2003 FORGED STEEL SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES - GRADE 6 - SAFETY
BS EN ISO 4028:2003 Hexagon socket set screws with dog point
UNE-EN ISO 2320:2017 Fasteners - Prevailing torque steel nuts - Functional properties (ISO 2320:2015)
UNE-EN ISO 1580:2012 Slotted pan head screws - Product grade A (ISO 1580:2011)
BS EN ISO 7042:2012 Prevailing torque type all-metal hexagon high nuts. Property classes 5, 8, 10 and 12
BS EN ISO 21269:2004 Hexagon socket head cap screws with metric fine pitch thread
BS EN ISO 9974-3:2000 Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Stud ends with metal-to-metal sealing (type B)
BS EN 27435:1992 Slotted set screws with long dog point
UNE-EN ISO 7048:2011 Cross-recessed cheese head screws (ISO 7048:2011)
ISO 6410-1:1993 Technical drawings — Screw threads and threaded parts — Part 1: General conventions
IEC 60255-27:2013 Measuring relays and protection equipment - Part 27: Product safety requirements
BS EN ISO 898-1:2013 Mechanical properties of fasteners made of carbon steel and alloy steel Bolts, screws and studs with specified property classes. Coarse thread and fine pitch thread
BS EN 13012:2012 Petrol filling stations. Construction and performance of automatic nozzles for use on fuel dispensers
BS EN ISO 10513:2012 Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread. Property classes 8, 10 and 12
UNE-EN 62109-1:2011 Safety of power converters for use in photovoltaic power systems -- Part 1: General requirements
BS EN ISO 15245-1 : 2001 GAS CYLINDERS - PARALLEL THREADS FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATION
00/243909 DC : DRAFT AUG 2000 IEC 61730-1 - PHOTOVOLTAIC MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
ISO 7048:2011 Cross-recessed cheese head screws
ISO 8434-4:1995 Metallic tube connections for fluid power and general use Part 4: 24 degree cone connectors with O-ring weld-on nipples
UNE-EN ISO 2009:2012 Slotted countersunk flat head screws - Product grade A (ISO 2009:2011)
UNI EN ISO 3506-2 : 2010 MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 2: NUTS
CSA C22.2 No. 60950-1 :2007 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 60950-1 : 2007 : INC : AMD 1 : 2011 : R2012 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
ONORM EN ISO 3506-2 : 2010 MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 2: NUTS
API STD 612:2020 Petroleum, Petrochemical, and Natural Gas Industries - Steam Turbines - Special-purpose Applications
UNE-EN 60950-1:2007 Information technology equipment - Safety - Part 1: General requirements
CSA C22.2 No. 60950-1 : 2007 : INC : AMD 2 : 2014 : R201200 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 60950-1 : 2007 : R2012 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 60950-1 : 2007 : INC : UPD 1 : 2011 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
UNI EN ISO 3506-1 : 2010 MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS
CSA C22.2 No. 60950-1 : 2007 : INC : AMD 2 : 2014 : R2016 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
ONORM EN ISO 3506-1 : 2010 MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS
ONORM EN 116 : 2015 DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - STEPWISE COOLING BATH METHOD
EN ISO 6410-1:1996 Technical drawings - Screw threads and threaded parts - Part 1: General conventions (ISO 6410-1:1993)
EN ISO 9409-2:2003 Manipulating industrial robots - Mechanical interfaces - Part 2: Shafts (ISO 9409-2:2002)
EN ISO 7048:2011 Cross-recessed cheese head screws (ISO 7048:2011)
EN ISO 9409-1:2004 Manipulating industrial robots - Mechanical interfaces - Part 1: Plates (ISO 9409-1:2004)
EN ISO 10513:2012 Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread - Property classes 8, 10 and 12 (ISO 10513:2012)
EN ISO 6149-3:2007 Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends (ISO 6149-3:2006)
UNI EN 1591-1 : 2014 FLANGES AND THEIR JOINTS - DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS - PART 1: CALCULATION
UNI EN ISO 8765 : 2011 HEXAGON HEAD BOLTS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
UNI EN ISO 7042 : 2013 PREVAILING TORQUE TYPE ALL-METAL HEXAGON HIGH NUTS - PROPERTY CLASSES 5, 8, 10 AND 12
UNI EN ISO 14579 : 2011 HEXALOBULAR SOCKET HEAD CAP SCREWS
UNI EN ISO 2009 : 2012 SLOTTED COUNTERSUNK FLAT HEAD SCREWS - PRODUCT GRADE A
UNI EN ISO 10512 : 2013 PREVAILING TORQUE TYPE HEXAGON REGULAR NUTS (WITH NON-METALLIC INSERT) WITH METRIC FINE PITCH THREAD - PROPERTY CLASSES 6, 8 AND 10
UNI EN ISO 7040 : 2013 PREVAILING TORQUE TYPE HEXAGON REGULAR NUTS (WITH NON-METALLIC INSERT) - PROPERTY CLASSES 5, 8 AND 10
UNI EN 13889 : 2009 FORGED STEEL SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES - GRADE 6: SAFETY
UNI EN ISO 7719 : 2013 PREVAILING TORQUE TYPE ALL-METAL HEXAGON REGULAR NUTS - PROPERTY CLASSES 5, 8 AND 10
UNI EN ISO 10513 : 2013 PREVAILING TORQUE TYPE ALL-METAL HEXAGON HIGH NUTS WITH METRIC FINE PITCH THREAD - PROPERTY CLASSES 8, 10 AND 12
UNI EN ISO 14580 : 2011 HEXALOBULAR SOCKET CHEESE HEAD SCREWS
UNI EN ISO 898-1 : 2013 MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD
EN ISO 14583:2011 Hexalobular socket pan head screws (ISO 14583:2011)
UNI EN ISO 1207 : 2012 SLOTTED CHEESE HEAD SCREWS - PRODUCT GRADE A
UNI EN ISO 1580 : 2012 SLOTTED PAN HEAD SCREWS - PRODUCT GRADE A
UNI EN ISO 7045 : 2012 PAN HEAD SCREWS WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A
UNI EN ISO 3506-3 : 2010 MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 3: SET SCREWS AND SIMILAR FASTENERS NOT UNDER TENSILE STRESS
UNI EN ISO 2010 : 2012 SLOTTED RAISED COUNTERSUNK HEAD SCREWS - PRODUCT GRADE A
UNI EN ISO 14583 : 2011 HEXALOBULAR SOCKET PAN HEAD SCREWS
UNI EN ISO 7047 : 2012 RAISED COUNTERSUNK HEAD SCREWS (COMMON HEAD STYLE) WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A
UNI EN ISO 7046-2 : 2012 COUNTERSUNK FLAT HEAD SCREWS (COMMON HEAD STYLE) WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A - PART 2: STEEL SCREWS OF PROPERTY CLASS 8.8, STAINLESS STEEL SCREWS AND NON-FERROUS METAL SCREWS
BS 3643-1:1981 ISO metric screw threads Principles and basic data
UNI EN 13000 : 2014 CRANES - MOBILE CRANES
UNI EN ISO 898-5 : 2012 MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 5: SET SCREWS AND SIMILAR THREADED FASTENERS WITH SPECIFIED HARDNESS CLASSES - COARSE THREAD AND FINE PITCH THREAD
UNI EN ISO 10511 : 2013 PREVAILING TORQUE TYPE HEXAGON THIN NUTS (WITH NON-METALLIC INSERT)
UNI EN ISO 7046-1 : 2012 COUNTERSUNK FLAT HEAD SCREWS (COMMON HEAD STYLE) WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A - PART 1: STEEL OF PROPERTY CLASS 4.8
UNI EN ISO 10440-1 : 2008 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY-TYPE POSITIVE-DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS
UNI EN ISO 14584 : 2011 HEXALOBULAR SOCKET RAISED COUNTERSUNK HEAD SCREWS
UNI EN ISO 10642 : 2013 HEXAGON SOCKET COUNTERSUNK HEAD SCREWS
UNI EN ISO 9168 : 2009 DENTISTRY - HOSE CONNECTORS FOR AIR DRIVEN DENTAL HANDPIECES
DIN ISO 3903 E : 2015 SHIPS AND MARINE TECHNOLOGY - SHIPS' ORDINARY RECTANGULAR WINDOWS (ISO 3903:2012)
BS 2000-612(2013) : 2013 DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - LINEAR COOLING BATH METHOD
UNI EN ISO 7380-1 : 2012 BUTTON HEAD SCREWS - PART 1: HEXAGON SOCKET BUTTON HEAD SCREWS
10/30231432 DC : 0 BS EN ISO 10439-1 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS - PART 1: GENERAL REQUIREMENTS
14/30298880 DC : 0 BS EN ISO 2320 - FASTENERS - PREVAILING TORQUE TYPE STEEL NUTS - MECHANICAL AND PERFORMANCE PROPERTIES
10/30218476 DC : 0 BS EN 61056-2 ED. 3 - GENERAL PURPOSE LEAD-ACID BATTERIES (VALVE-REGULATED TYPES) - PART 2: DIMENSIONS, TERMINALS AND MARKING
BS ISO 3903:2012 Ships and marine technology. Ships’ ordinary rectangular windows
BS ISO 16246:2005 Road vehicles. M12 x 1,25 spark-plugs with flat seating and 14 mm hexagon and their cylinder head housing
EN 13000:2010+A1:2014 Cranes - Mobile cranes
SAE J 2494-2 : 2017 DIMENSIONAL SPECIFICATIONS FOR NON-METALLIC BODY PUSH-TO-CONNECT FITTINGS USED ON A VEHICULAR AIR BRAKE SYSTEM
I.S. EN ISO 8434-4:2000 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 4: 24 DEGREE CONE CONNECTORS WITH O-RING WELD-ON NIPPLES
I.S. EN 29168:1994 DENTAL HANDPIECES - HOSE CONNECTORS
PREN 14620-2 : DRAFT 2003 DESIGN AND MANUFACTURE OF SITE BUILT, VERTICAL, CYLINDRICAL, FLAT-BOTTOMED STEEL TANKS FOR THE STORAGE OF REFRIGERATED, LIQUEFIED GASES WITH OPERATING TEMPERATURES BETWEEN -5 DEGREE C AND -165 DEGREE C - PART 2: METALLIC COMPONENTS
09/30203242 DC : 0 BS ISO 7380-1 - HEXAGON SOCKET BUTTON HEAD SCREWS - PART 1: BUTTON HEAD (HEAD SHAPE A)
BS EN ISO 9168:2009 Dentistry. Hose connectors for air driven dental handpieces
BS ISO 6149-1:1993 Connections for fluid power and general use. Ports and stud ends with ISO 261 threads and O-ring sealing Ports with O-ring in truncated housing
BS ISO 965-3:1998 ISO general purpose metric screw threads. Tolerances Deviations for constructional screw threads
SAE J 2337-2 : 2017 CONNECTIONS FOR FLUID POWER AND HIGH PRESSURE USE - PORTS, STUD ENDS, AND PLUGS WITH ISO 261 THREADS AND O-RING SEALING - PART 2: STUD END REQUIREMENTS, DIMENSIONS, DESIGN, AND TEST METHODS
04/30124525 DC : DRAFT OCT 2004 ISO/DIS 6149-2 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 2: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR HEAVY-DUTY (S SERIES) STUD ENDS
DIN ISO 16030:2007-05 PNEUMATIC FLUID POWER - CONNECTIONS - PORTS AND STUD ENDS
UNI EN ISO 14581 : 2014 FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK FLAT HEAD SCREWS
BS EN 14399-8:2007 High-strength structural bolting assemblies for preloading System HV. Hexagon fit bolt and nut assemblies
10/30219408 DC : 0 BS EN 13617-2 - PETROL FILLING STATIONS - PART 2: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SAFE BREAKS FOR USE ON METERING PUMPS AND DISPENSERS
08/30168843 DC : DRAFT MAR 2008 BS EN ISO 9168 - DENTISTRY - HOSE CONNECTORS FOR AIR DRIVEN DENTAL HANDPIECES
BS 6913-13:1997 Operation and maintenance of earth-moving machinery Specification for lubrication fittings. Nipple type
DIN EN ISO 3266:2016-05 FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010 + AMD 1:2015)
ISO 7121:2016 Steel ball valves for general-purpose industrial applications
BS ISO 7180:1986 Pneumatic fluid power. Cylinders. Bore and port thread sizes
12/30244452 DC : 0 BS ISO 16857 - SHIPS AND MARINE TECHNOLOGY - LOOSE GEAR OF LIFTING APPLIANCES ON SHIPS - SHACKLES
UNE-EN 60065:2015 Audio, video and similar electronic apparatus - Safety requirements
DIN ISO 3019-2:2004-02 Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Part 2: Metric series (ISO 3019-2:2001)
BS EN 1515-4:2009 Flanges and their joints. Bolting Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
BS ISO 10663:2012 Hexagon nuts with flange, style 2. Fine pitch thread
BS ISO 4902:1989 Information technology. Data communication. 37-pole DTE/DCE interface connector and contact number assignments
PREN 116 : DRAFT 2009 DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT
DIN ISO 965-1:2017-05 ISO GENERAL PURPOSE METRIC SCREW THREADS - TOLERANCES - PART 1: PRINCIPLES AND BASIC DATA (ISO 965-1:2013)
DIN ISO 6020-1:2010-07 Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Part 1: Medium series (ISO 6020-1:2007)
13/30287034 DC : 0 BS EN 3660-001 - AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 001: TECHNICAL SPECIFICATION
10/30214867 DC : 0 BS EN ISO 21049 - PUMPS - SHAFT-SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS
BS ISO 6162-1:2012 Hydraulic fluid power. Flange connections with split or one-piece flange clamps and metric or inch screws Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
XP PREN 3660-001 : 1994 XP AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 001: TECHNICAL SPECIFICATION
08/30152628 DC : DRAFT SEP 2008 BS ISO 6550-4 - ROAD VEHICLES - SHEATH-TYPE GLOW-PLUGS WITH CONICAL SEATING AND THEIR CYLINDER HEAD HOUSING - PART 4: M8 X 1 GLOW-PLUGS
01/206938 DC : DRAFT OCT 2001 IEC 60255-27 ED.1.0 - MEASURING RELAYS AND EQUIPMENT - PART 27: PRODUCT SAFETY REQUIREMENTS FOR MEASURING RELAYS AND PROTECTION EQUIPMENT
11/30232174 DC : DRAFT AUG 2011 BS ISO 6550-3 - ROAD VEHICLES - SHEATH-TYPE GLOW-PLUGS WITH CONICAL SEATING AND THEIR CYLINDER HEAD HOUSING - PART 3: M10 GLOW-PLUGS
BS ISO 6149-2:1993 Connections for fluid power and general use. Ports and stud ends with ISO 261 threads and O-ring sealing Heavy-duty (S series) stud ends. Dimensions, design, test methods and requirements.
BS EN ISO 7380-1:2011 Button head screws Hexagon socket button head screws
05/30129010 DC : DRAFT FEB 2005 IEC 60191-1 ED.2 - MECHANICAL STANDARDIZATION OF SEMICONDUCTOR DEVICES - PART 1: GENERAL RULES FOR THE PREPARATION OF OUTLINE DRAWINGS OF DISCRETE DEVICES
BS ISO 8434-4 : 1995 AMD 11038 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - 24 DEGREE CONE CONNECTORS WITH O-RING WELD-ON NIPPLES
02/705659 DC : DRAFT APR 2002 ISO/DIS 21049 - PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS
API 675 : 2012 POSITIVE DISPLACEMENT PUMPS - CONTROLLED VOLUME FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
SAE J 1453/2 : 2015 Specification for O-Ring Face Seal Connectors: Part 2 - Requirements, Dimensions, and Tests for Steel Unions, Bulkheads, Swivels, Braze Sleeves, Braze-on Tube Ends, Caps, and Connectors with ISO 6149-2 Metric Stud Ends and ISO 6162 4-Bolt Flange Heads
08/30173031 DC : DRAFT JAN 2008 BS EN 1515-4 - FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC
BS ISO 4903:1989 Information technology. Data communication. 15-pole DTE/DCE interface connector and contact number assignments
SAE J 518/1 : 2013 HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, 4-SCREW FLANGE CONNECTION - PART 1: 3.5 MPA TO 35 MPA (CODE 61)
API 674 : 2010(R2016) POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
BS ISO 262:1998 ISO general purpose metric screw threads. Selected sizes for screws, bolts and nuts
BS AU 261:1995 Diesel engines. High-pressure fuel injection pipe end-connections with 60° female cone
ISO 2346:2001 Road vehicles M14 x 1,25 compact spark-plugs with flat seating and 19 mm hexagon and their cylinder head housing
CSA C22.2 No. 234 : 1990 SAFETY OF COMPONENT POWER SUPPLIES
API 616 REDLINE : 2011 GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
I.S. EN ISO 15245-1:2002 GAS CYLINDERS - PARALLEL THREADS FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATION (ISO 15245-1:2001)
ANSI Z21.40.2 : 1996 : INC : ADD A : 1997 : R2017 GAS-FIRED, WORK ACTIVATED AIR-CONDITIONING AND HEAT PUMP APPLIANCES (INTERNAL COMBUSTION)
ANSI Z21.40.2 : 1996 : INC : ADD A : 1997 : R2012 GAS-FIRED, WORK ACTIVATED AIR-CONDITIONING AND HEAT PUMP APPLIANCES (INTERNAL COMBUSTION)
SAE J 2494 : 2011 PUSH-TO-CONNECT TUBE FITTINGS FOR USE IN THE PIPING OF VEHICULAR AIR BRAKE
IS 1367 : Part 3 : 2017 TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 3: MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND BOLTS, SCREWS AND STUDS
SAE J 2337-3 : 2017 CONNECTIONS FOR FLUID POWER AND HIGH PRESSURE USE - PORTS, STUD ENDS, AND PLUGS WITH ISO 261 THREADS AND O-RING SEALING - PART 3: PORT PLUG REQUIREMENTS, DIMENSIONS, DESIGN, AND TEST METHODS
DIN EN 1515-4 E : 2010 FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC
ANSI Z21.87 : 2007 : INC : ADD A : 2010 : R2017 AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS
SAE J 2494-1 : 2017 DIMENSIONAL SPECIFICATIONS FOR METALLIC BODY PUSH-TO-CONNECT FITTINGS USED ON A VEHICULAR AIR BRAKE SYSTEM
API 676 CHINESE : 2009 POSITIVE DISPLACEMENT PUMPS - ROTARY
API 682 CHINESE : 2014 PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS
API STD 676 : 2009 POSITIVE DISPLACEMENT PUMPS - ROTARY
CSA C22.2 No. 60065 : 2016 AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
API 546 : 2008 BRUSHLESS SYNCHRONOUS MACHINES - 500 KVA AND LARGER
CSA 12.56 : 1999 : R2018 MANUALLY OPERATED VALVES FOR NATURAL GAS DISPENSING SYSTEMS
API 610 : 2010 CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
API 676 : 2009 : R2015 POSITIVE DISPLACEMENT PUMPS - ROTARY
CSA C22.2 No. 61730-1 : 2011 : INC : UPD 1 : 2013 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
PREN 13617-2 : DRAFT 2010 PETROL FILLING STATIONS - PART 2: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SAFE BREAKS FOR USE ON METERING PUMPS AND DISPENSERS
API 610 REDLINE : 2010 CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
API 674 : 2010 : ERR 2 : 2015 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
SAE J 2337-1 : 2014 CONNECTIONS FOR FLUID POWER AND HIGH PRESSURE USE - PORTS, STUD ENDS, AND PLUGS WITH ISO 261 THREADS AND O-RING SEALING - PART 1: PORTS WITH RECESSED CONICAL SEAT REQUIREMENTS, DIMENSIONS, DESIGN, AND TEST METHODS
SAE MA 1421 : 2018 AEROSPACE SELECTED DIAMETER-PITCH COMBINATIONS OF METRIC 60 DEGREES SCREW THREADS FOR SHAFT OR BEARING RETAINING SCREW THREADS
API 662 : 2006 PLATE HEAT EXCHANGERS FOR GENERAL REFINERY SERVICES
ISO 17447-1:2015 Road Vehicles Glow-plugs with conical seating and their cylinder head housing Part 1: Basic characteristics and dimensions for metal-sheath-type glow-plugs
API 674 : 2010 : INC : ERR 1 : 2015 : R2016 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
BS EN 3660-001:2016 Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors Technical specification
I.S. EN 60065:2014 AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
I.S. EN IEC 60191-1:2018 MECHANICAL STANDARDIZATION OF SEMICONDUCTOR DEVICES - PART 1: GENERAL RULES FOR THE PREPARATION OF OUTLINE DRAWINGS OF DISCRETE DEVICES
NF EN ISO 9168 : 2009 DENTISTRY - HOSE CONNECTORS FOR AIR DRIVEN DENTAL HANDPIECES
PREN 331 : DRAFT 2013 MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS
I.S. EN ISO 3266:2010 FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010)
UNI ISO 8434-3 : 2012 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 3: O-RING FACE SEAL CONNECTORS
DIN EN 14399-8:2016-01 (Draft) HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES
ISO 4161:2012 Hexagon nuts with flange, style 2 — Coarse thread
UNI EN ISO 898-2 : 2012 MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 2: NUTS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD
BS EN 14399-7:2007 High-strength structural bolting assemblies for preloading System HR. Countersunk head bolt and nut assemblies
ISO 2415:2004 Forged shackles for general lifting purposes — Dee shackles and bow shackles
ISO 1751:2012 Ships and marine technology — Ships' side scuttles
ISO 18139:2017 Ships and marine technology — Globe valves for use in low temperature applications — Design and testing requirements
I.S. EN 16329:2013 DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - LINEAR COOLING BATH METHOD
ISO 7044:2012 Prevailing torque type all-metal hexagon nuts with flange, style 2 — Product grades A and B
I.S. EN 3660-001:2016 AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 001: TECHNICAL SPECIFICATION
DIN EN ISO 12474:2011-01 Hexagon socket head cap screws with metric fine pitch thread (ISO 12474:2010)
BS EN 14399-10:2009 High-strength structural bolting assemblies for preloading System HRC. Bolt and nut assemblies with calibrated preload
15/30332548 DC : 0 BS EN 14399-8 - HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES
BS ISO 6550-4:2014 Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing M8 x 1 glow-plugs
UNE-EN ISO 14581:2016 Fasteners - Hexalobular socket countersunk flat head screws (ISO 14581:2013)
ISO 19812:2006 Road vehicles M10 x 1 compact spark-plugs with flat seating and 16 mm hexagon and their cylinder head housings
I.S. EN 4645-001:2010 AEROSPACE SERIES - CONNECTORS, OPTICAL, CIRCULAR, SINGLE AND MULTIPIN, COUPLED BY THREADED RING, SELF-LOCKING 1,25 MM DIAMETER FERRULE WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 001: TECHNICAL SPECIFICATION
ISO 16246:2005 Road vehicles M12 x 1,25 spark-plugs with flat seating and 14 mm hexagon and their cylinder head housing
EN 13617-2:2012 Petrol filling stations - Part 2: Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers
ISO 6162-1:2012 Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
ISO 4775:1984 Hexagon nuts for high-strength structural bolting with large width across flats Product grade B Property classes 8 and 10
ISO 7379:1983 Hexagon socket head shoulder screws
ISO 8434-2:2007 Metallic tube connections for fluid power and general use — Part 2: 37 degree flared connectors
ISO 8434-1:2007 Metallic tube connections for fluid power and general use Part 1: 24 degree cone connectors
ISO 14508:2006 Road vehicles Spark-plugs Terminals
ISO 6550-4:2014 Road vehicles Sheath-type glow-plugs with conical seating and their cylinder head housing Part 4: M8 x 1 glow-plugs
ISO 15072:2012 Hexagon bolts with flange with metric fine pitch thread Small series Product grade A
EN ISO 9997:1999 Dental cartridge syringes (ISO 9997:1999)
I.S. EN ISO 13709:2009 CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
I.S. EN ISO 9997:2000 DENTAL CARTRIDGE SYRINGES
DIN EN 13012:2012-09 Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers
DIN EN 27436:1992-10 SLOTTED SET SCREWS WITH CUP POINT
DIN EN ISO 2320:2016-05 FASTENERS - PREVAILING TORQUE STEEL NUTS - FUNCTIONAL PROPERTIES (ISO 2320:2015)
DIN EN ISO 2010:2011-12 Slotted raised countersunk head screws - Product grade A (ISO 2010:2011)
DIN EN 27435:1992-10 SLOTTED SET SCREWS WITH LONG DOG POINT
ONORM EN 13012 : 2012 PETROL FILLING STATIONS - CONSTRUCTION AND PERFORMANCE OF AUTOMATIC NOZZLES FOR USE ON FUEL DISPENSERS
DIN EN ISO 14584:2011-06 Hexalobular socket raised countersunk head screws (ISO 14584:2011)
DIN EN 27434:1992-10 SLOTTED SET SCREWS WITH CONE POINT
DIN EN ISO 2009:2011-12 Slotted countersunk flat head screws - Product grade A (ISO 2009:2011)
BS EN ISO 10642 : 2004 HEXAGON SOCKET COUNTERSUNK HEAD SCREWS
BS EN ISO 2342:2003 Slotted headless screws with shank
UNE-EN ISO 17292:2016 Metal ball valves for petroleum, petrochemical and allied industries (ISO 17292:2015)
BS EN ISO 13691:2002 Petroleum and natural gas industries. High-speed special-purpose gear units
BS EN 14399-3:2015 High-strength structural bolting assemblies for preloading System HR. Hexagon bolt and nut assemblies
BS EN 3645-001:2015 Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175°C or 200°C continuous Technical specification
ISO 9974-1:1996 Connections for general use and fluid power Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Part 1: Threaded ports
BS EN ISO 10512:2012 Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread. Property classes 6, 8 and 10
UNE-EN ISO 14579:2011 Hexalobular socket head cap screws (ISO 14579:2011)
BS EN ISO 17292:2015 Metal ball valves for petroleum, petrochemical and allied industries
BS EN ISO 10511:2012 Prevailing torque type hexagon thin nuts (with non-metallic insert)
BS EN 27436:1992 Slotted set screws with cup point
BS EN ISO 6149-3:2007 Connections for hydraulic fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing Dimensions, design, test methods and requirements for light-duty (L series) stud ends
UNE-EN ISO 3506-2:2010 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009)
BS EN ISO 10440-1:2001 Petroleum and natural gas industries. Rotary-type positive-displacement compressors Process compressors (oil-free)
ISO 7045:2011 Pan head screws with type H or type Z cross recess Product grade A
ISO 7042:2012 Prevailing torque type all-metal hexagon high nuts — Property classes 5, 8, 10 and 12
UNE-EN ISO 7047:2012 Raised countersunk head screws (common head style) with type H or type Z cross recess - Product grade A (ISO 7047:2011)
BS EN 14620-2:2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0°C and -165°C Metallic components
IEC 61056-2:2012 General purpose lead-acid batteries (valve-regulated types) - Part 2: Dimensions, terminals and marking
ISO 14579:2011 Hexalobular socket head cap screws
ISO 2320:2015 Fasteners Prevailing torque steel nuts Functional properties
ISO 965-3:1998 ISO general purpose metric screw threads Tolerances Part 3: Deviations for constructional screw threads
BS EN ISO 14584:2011 Hexalobular socket raised countersunk head screws
ISO 3266:2010 Forged steel eyebolts grade 4 for general lifting purposes
ISO 14582:2013 Fasteners — Hexalobular socket countersunk head screws, high head
BS EN 20898-2:1994 Mechanical properties of fasteners Nuts with specified proof load values. Coarse thread
BS EN ISO 7046-2:2011 Countersunk flat head screws (common head style) with type H or type Z cross recess. Product grade A Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws
BS EN ISO 15547:2001 Petroleum and natural gas industries. Plate heat exchangers
ISO 10437:2003 Petroleum, petrochemical and natural gas industries — Steam turbines — Special-purpose applications
EN ISO 3506-1:2009 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009)
BS EN 28839:1992 Mechanical properties of fasteners. Bolts, screws, studs and nuts made of non-ferrous metals
BS EN ISO 1207:2011 Slotted cheese head screws. Product grade A
I.S. EN ISO 3506-2:2009 MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 2: NUTS
ISO 898-1:2013 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread
BS EN 62109-1:2010 Safety of power converters for use in photovoltaic power systems General requirements
UNE-EN ISO 7046-2:2012 Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws (ISO 7046-2:2011)
ISO 13710:2004 Petroleum, petrochemical and natural gas industries Reciprocating positive displacement pumps
BS EN ISO 7380:2004 Hexagon socket button head screws
ISO 12474:2010 Hexagon socket head cap screws with metric fine pitch thread
BS EN 331:2015 Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings
BS EN 27434:1992 Slotted set screws with cone point
UNE-EN ISO 14580:2011 Hexalobular socket cheese head screws (ISO 14580:2011)
BS EN ISO 7048:2011 Cross-recessed cheese head screws
UNE-EN 1515-4:2010 Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
ISO 898-5:2012 Mechanical properties of fasteners made of carbon steel and alloy steel Part 5: Set screws and similar threaded fasteners with specified hardness classes Coarse thread and fine pitch thread
ISO 9974-3:1996 Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 3: Stud ends with metal-to-metal sealing (type B)
ISO 7380-1:2011 Button head screws — Part 1: Hexagon socket button head screws
ISO 2342:2003 Slotted headless screws with shank
ISO 2009:2011 Slotted countersunk flat head screws Product grade A
ISO 7046-1:2011 Countersunk flat head screws (common head style) with type H or type Z cross recess Product grade A Part 1: Steel screws of property class 4.8
UNE-EN 13012:2012 Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers
ISO 4766:2011 Slotted set screws with flat point
ISO 14581:2013 Fasteners — Hexalobular socket countersunk flat head screws
ISO 9409-2:2002 Manipulating industrial robots Mechanical interfaces Part 2: Shafts
ISO 10442:2002 Petroleum, chemical and gas service industries Packaged, integrally geared centrifugal air compressors
BS EN ISO 13710:2004 Petroleum, petrochemical and natural gas industries. Reciprocating positive displacement pumps
ISO 898-6:1994 Mechanical properties of fasteners Part 6: Nuts with specified proof load values Fine pitch thread
ISO 7719:2012 Prevailing torque type all-metal hexagon regular nuts — Property classes 5, 8 and 10
ISO 13691:2001 Petroleum and natural gas industries — High-speed special-purpose gear units
ISO 9974-2:1996 Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 2: Stud ends with elastomeric sealing (type E)
UNE-EN ISO 8765:2011 Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:2011)
ISO 9168:2009 Dentistry Hose connectors for air driven dental handpieces
ISO 10439-1:2015 Petroleum, petrochemical and natural gas industries Axial and centrifugal compressors and expander-compressors Part 1: General requirements
ISO 21269:2004 Hexagon socket head cap screws with metric fine pitch thread
ISO 10511:2012 Prevailing torque type hexagon thin nuts (with non-metallic insert)
ISO 7046-2:2011 Countersunk flat head screws (common head style) with type H or type Z cross recess Product grade A Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws
ISO 7380-2:2011 Button head screws — Part 2: Hexagon socket button head screws with collar
ISO 965-1:2013 ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data
ISO 15245-1:2001 Gas cylinders Parallel threads for connection of valves to gas cylinders Part 1: Specification
ISO 1207:2011 Slotted cheese head screws Product grade A
ISO 14580:2011 Hexalobular socket cheese head screws
BS EN ISO 1580:2011 Slotted pan head screws. Product grade A
BS EN 60950-1 : 2006 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
ISO 898-2:2012 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread
ISO 10513:2012 Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread — Property classes 8, 10 and 12
ISO 1580:2011 Slotted pan head screws Product grade A
UNE-EN 1591-1:2014 Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation
ISO 9409-1:2004 Manipulating industrial robots — Mechanical interfaces — Part 1: Plates
ISO 14583:2011 Hexalobular socket pan head screws
UNE-EN ISO 3506-3:2010 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009)
UNE-EN 13000:2010 Cranes - Mobile cranes
BS EN ISO 2320:2015 Fasteners. Prevailing torque steel nuts. Functional properties
I.S. EN ISO 3506-1:2009 MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS
BS EN 1515-1:2000 Flanges and their joints. Bolting Selection of bolting
BS EN ISO 14583:2011 Hexalobular socket pan head screws
ISO 6149-2:2006 Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends
ISO 7040:2012 Prevailing torque type hexagon regular nuts (with non-metallic insert) — Property classes 5, 8 and 10
ISO 10440-1:2007 Petroleum, petrochemical and natural gas industries — Rotary-type positive-displacement compressors — Part 1: Process compressors
BS EN 14399-4:2005 High-strength structural bolting assemblies for preloading System HV. Hexagon bolt and nut assemblies
ISO 4026:2003 Hexagon socket set screws with flat point
UNE-EN ISO 898-5:2013 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012)
UNE-EN ISO 7719:2013 Prevailing torque type all-metal hexagon regular nuts - Property classes 5, 8 and 10 (ISO 7719:2012)
ISO 10512:2012 Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread — Property classes 6, 8 and 10
EN ISO 3506-2:2009 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009)
16/30242287 DC : 0 BS EN 62688 - CONCENTRATOR PHOTOVOLTAIC (CPV) MODULE AND ASSEMBLY SAFETY QUALIFICATION
ISO 8765:2011 Hexagon head bolts with metric fine pitch thread Product grades A and B
ISO 7047:2011 Raised countersunk head screws (common head style) with type H or type Z cross recess Product grade A
ISO 6149-3:2006 Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends
BS EN ISO 14580:2011 Hexalobular socket cheese head screws
ISO 4027:2003 Hexagon socket set screws with cone point
BS EN ISO 8765:2011 Hexagon head bolts with metric fine pitch thread. Product grades A and B
DIN EN ISO 4026:2004-05 Hexagon socket set screws with flat point (ISO 4026:2003)
DIN EN ISO 14579:2011-06 Hexalobular socket head cap screws (ISO 14579:2011)
EN 1515-4:2009 Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
EN 62109-1 : 2010 SAFETY OF POWER CONVERTERS FOR USE IN PHOTOVOLTAIC POWER SYSTEMS - PART 1: GENERAL REQUIREMENTS
EN ISO 7040:2012 Prevailing torque type hexagon regular nuts (with non-metallic insert) - Property classes 5, 8 and 10 (ISO 7040:2012)
EN 28839 : 1991 MECHANICAL PROPERTIES OF FASTENERS - BOLTS, SCREWS, STUDS AND NUTS MADE OF NON-FERROUS METALS (ISO 8839:1986)
EN ISO 13709:2009 Centrifugal pumps for petroleum, petrochemical and natural gas industries (ISO 13709:2009)
EN ISO 10437:2003 Petroleum, petrochemical and natural gas industries - Steam turbines - Special-purpose applications (ISO 10437:2003)
UNI EN 13617-4 : 2012 PETROL FILLING STATIONS - PART 4: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SWIVELS FOR USE ON METERING PUMPS AND DISPENSERS
EN ISO 14584:2011 Hexalobular socket raised countersunk head screws (ISO 14584:2011)
UNI EN 13617-2 : 2012 PETROL FILLING STATIONS - PART 2: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SAFE BREAKS FOR USE ON METERING PUMPS AND DISPENSERS
EN 24035 : 1991 HEXAGON THIN NUTS (CHAMFERED) - PRODUCT GRADES A AND B
EN ISO 7045:2011 Pan head screws with type H or type Z cross recess - Product grade A (ISO 7045:2011)
EN ISO 7042:2012 Prevailing torque type all-metal hexagon high nuts - Property classes 5, 8, 10 and 12 (ISO 7042:2012)
EN ISO 6149-2:2007 Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends (ISO 6149-2:2007)
UNI EN 13012 : 2012 PETROL FILLING STATIONS - CONSTRUCTION AND PERFORMANCE OF AUTOMATIC NOZZLES FOR USE ON FUEL DISPENSERS
EN 13828:2003 Building valves - Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings -Tests and requirements
EN ISO 898-1:2013 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013)
EN ISO 1207:2011 Slotted cheese head screws - Product grade A (ISO 1207:2011)
EN ISO 14580:2011 Hexalobular socket cheese head screws (ISO 14580:2011)
EN ISO 7046-1:2011 Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 1: Steel screws of property class 4.8 (ISO 7046-1:2011)
EN ISO 7380:2004 Hexagon socket button head screws (ISO 7380:2004)
EN ISO 9168:2009 Dentistry - Hose connectors for air driven dental handpieces (ISO 9168:2009)
EN 16329:2013 Diesel and domestic heating fuels - Determination of cold filter plugging point - Linear cooling bath method
EN ISO 17292:2015 METAL BALL VALVES FOR PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES (ISO 17292:2015)
EN 1515-1:1999 Flanges and their joints - Bolting - Part 1: Selection of bolting
EN ISO 1580:2011 Slotted pan head screws - Product grade A (ISO 1580:2011)
EN 13889:2003+A1:2008 Forged steel shackles for general lifting purposes - Dee shackles and bow shackles - Grade 6 - Safety
EN ISO 14582:2013 Fasteners - Hexalobular socket countersunk head screws, high head (ISO 14582:2013)
EN ISO 13691:2002 Petroleum and natural gas industries - High-speed special-purpose gear units (ISO 13691:2001)
EN ISO 10642:2004/A1:2012 HEXAGON SOCKET COUNTERSUNK HEAD SCREWS (ISO 10642:2004/AMD 1:2012)
EN ISO 4762:2004 Hexagon socket head cap screws (ISO 4762:2004)
EN 24034 : 1991 HEXAGON NUTS - PRODUCT GRADE C
EN ISO 9974-2:2000 Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 2: Stud ends with elastomeric sealing (type E) (ISO 9974-2:1996)
EN ISO 7719:2012 Prevailing torque type all-metal hexagon regular nuts - Property classes 5, 8 and 10 (ISO 7719:2012)
EN ISO 10439-1:2015 Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 1: General requirements (ISO 10439-1:2015)
EN ISO 10512:2012 Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread - Property classes 6, 8 and 10 (ISO 10512:2012)
EN ISO 14579:2011 Hexalobular socket head cap screws (ISO 14579:2011)
EN ISO 8765:2011 Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:2011)
EN 20898-2 : 1993 MECHANICAL PROPERTIES OF FASTENERS - PART 2: NUTS WITH SPECIFIED PROOF LOAD VALUES - COARSE THREAD (ISO 898-2:1992)
EN ISO 4766:2011 Slotted set screws with flat point (ISO 4766:2011)
EN ISO 13631:2002 Petroleum and natural gas industries - Packaged reciprocating gas compressors (ISO 13631:2002)
EN 4645-001:2010 Aerospace series - Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder - Part 001: Technical specification
EN 14620-2:2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 2: Metallic components
EN 27434 : 1992 SLOTTED SET SCREWS WITH CONE POINT (ISO 7434:1983)
EN ISO 7046-2:2011 Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws (ISO 7046-2:2011)
EN ISO 3266:2010/A1:2015 FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010+A1:2015)
EN ISO 7047:2011 Raised countersunk head screws (common head style) with type H or type Z cross recess - Product grade A (ISO 7047:2011)
EN ISO 7380-1:2011 Button head screws - Part 1: Hexagon socket button head screws (ISO 7380-1:2011)
EN ISO 2010:2011 Slotted raised countersunk head screws - Product grade A (ISO 2010:2011)
EN ISO 10442:2002 Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors (ISO 10442:2002)
EN 3660-001:2016 Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 001: Technical specification
EN 1591-1:2013 Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation
EN 14399-4:2015 High-strength structural bolting assemblies for preloading - Part 4: System HV - Hexagon bolt and nut assemblies
EN ISO 14581:2013 Fasteners - Hexalobular socket countersunk flat head screws (ISO 14581:2013)
EN ISO 21049:2004 Pumps - Shaft sealing systems for centrifugal and rotary pumps (ISO 21049:2004)
EN ISO 7380-2:2011 Button head screws - Part 2: Hexagon socket button head screws with collar (ISO 7380-2:2011)
EN 286-3:1994 Simple unfired pressure vessels designed to contain air or nitrogen - Part 3: Steel pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock
EN ISO 4027:2003 Hexagon socket set screws with cone point (ISO 4027:2003)
EN ISO 2320:2015 Fasteners - Prevailing torque steel nuts - Functional properties (ISO 2320:2015)
EN ISO 15547 : 2001 PETROLEUM AND NATURAL GAS INDUSTRIES - PLATE HEAT EXCHANGERS
EN 3645-001:2015 Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 001: Technical specification
EN ISO 4026:2003 Hexagon socket set screws with flat point (ISO 4026:2003)
EN 27435 : 1992 SLOTTED SET SCREWS WITH LONG DOG POINT (ISO 7435:1983)
EN ISO 2342:2003 Slotted headless screws with shank (ISO 2342:2003)
EN ISO 10440-1:2007 Petroleum, petrochemical and natural gas industries - Rotary-type positive-displacement compressors - Part 1: Process compressors (ISO 10440-1:2007)
EN ISO 12474:2010 Hexagon socket head cap screws with metric fine pitch thread (ISO 12474:2010)
EN ISO 3506-3:2009 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009)
EN ISO 4028 : 2003 Hexagon socket set screws with dog point (ISO 4028:2003)
EN ISO 13710:2004 Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps (ISO 13710:2004)
EN 27436 : 1992 SLOTTED SET SCREWS WITH CUP POINT (ISO 7436:1983)
EN ISO 10511:2012 Prevailing torque type hexagon thin nuts (with non-metallic insert) (ISO 10511:2012)
EN 14399-3:2015 High-strength structural bolting assemblies for preloading - Part 3: System HR - Hexagon bolt and nut assemblies
EN ISO 21269:2004 Hexagon socket head cap screws with metric fine pitch thread (ISO 21269:2004)
EN ISO 8434-4 : 2000 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 4: 24 DEGREE CONE CONNECTORS WITH O-RING WELD-ON NIPPLES
EN ISO 898-5:2012 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012)
EN ISO 898-6 : 1995 MECHANICAL PROPERTIES OF FASTENERS - PART 6: NUTS WITH SPECIFIED PROOF LOAD VALUES - FINE PITCH THREAD
EN ISO 9974-1:2000 Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 9974-1:1996)
EN 24032 : 1991 HEXAGON NUTS, STYLE 1 - PRODUCT GRADES A AND B
EN ISO 2009:2011 Slotted countersunk flat head screws - Product grade A (ISO 2009:2011)
EN 24766 : 1992 SLOTTED SET SCREWS WITH FLAT POINT
EN 331:2015 Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings
EN 286-4:1994 Simple unfired pressure vessels designed to contain air or nitrogen - Part 4: Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock
EN ISO 9974-3:2000 Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3: Stud ends with metal-to-metal sealing (type B) (ISO 9974-3:1996)
PREN 13617-4 : DRAFT 2010 PETROL FILLING STATIONS - PART 4: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SWIVELS FOR USE ON METERING PUMPS AND DISPENSERS
BS ISO 12151-4:2007 Connections for hydraulic fluid power and general use. Hose fittings Hose fittings with ISO 6149 metric stud ends
BS EN 4645-001:2010 Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder Technical specification
BS 4219-4:1985 Slotted set screws: metric series Specification for slotted set screws with cup point
DIN EN ISO 14582:2014-02 FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK HEAD SCREWS, HIGH HEAD (ISO 14582:2013)
BS EN ISO 4766:2011 Slotted set screws with flat point
BS ISO 16030:2001 Pneumatic fluid power. Connections. Ports and stud ends
I.S. EN ISO 7380:2004 HEXAGON SOCKET BUTTON HEAD SCREWS
07/30167562 DC : 0 BS EN 4645-001 - AEROSPACE SERIES - CONNECTORS, OPTICAL, CIRCULAR, SINGLE AND MULTIPIN, COUPLED BY THREADED RING, 1,25 MM DIA. FERRULE WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 001: TECHNICAL SPECIFICATION
I.S. EN 24766:1993 SLOTTED SET SCREWS WITH FLAT POINT
ISO 18418-1:2016 Gasoline engines — Medium pressure liquid fuel supply connections — Part 1: 60° female cone connectors
02/711555 DC : 0 BS ISO 2415 - FORGED SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES
15/30332545 DC : 0 BS EN 14399-7 - HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 7: SYSTEM HR - COUNTERSUNK HEAD BOLT AND NUT ASSEMBLIES
PREN 14399-4 : DRAFT 2013 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 4: SYSTEM HV - HEXAGON BOLT AND NUT ASSEMBLIES
DIN EN ISO 8434-1 E : 2008 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
BS ISO 8470:2006 Road vehicles M14 x 1,25 spark-plugs with flat seating and 16 mm hexagon and their cylinder head housings
13/30279702 DC : 0 BS EN 331 - MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS
15/30329306 DC : 0 BS ISO 2974 - DIESEL ENGINES - 60 DEGREE FEMALE CONES FOR HIGH-PRESSURE FUEL INJECTION COMPONENTS
CSA HGV 4.4 : 2013(R2018) STANDARD FOR BREAKAWAY DEVICES FOR COMPRESSED HYDROGEN DISPENSING HOSES AND SYSTEMS
14/30299749 DC : 0 BS EN ISO 17292 - METAL BALL VALVES FOR PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES
ISO 724:1993 ISO general-purpose metric screw threads — Basic dimensions
MSS SP 133 : 2010 EXCESS FLOW VALVES FOR LOW PRESSURE FUEL GAS APPLIANCES
DIN EN 16329:2013-07 Diesel and domestic heating fuels - Determination of cold filter plugging point - Linear cooling bath method
16/30328245 DC : 0 BS ISO 6164 - HYDRAULIC FLUID POWER - FOUR-SCREW, ONE-PIECE SQUARE FLANGE CONNECTIONS FOR USE AT PRESSURES OF 42 MPA, DN 10 TO 80
BS ISO 15171-2:2016 Connections for fluid power and general use. Hydraulic couplings for diagnostic purposes Coupling with M16 x 2 end for connection under pressure
UNE-EN ISO 7380-1:2012 Button head screws - Part 1: Hexagon socket button head screws (ISO 7380-1:2011)
BS ISO 6415:2005 Internal combustion engines. Spin-on filters for lubricating oil. Dimensions
04/30008013 DC : 0 BS ISO 3266 - EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES
09/30155614 DC : 0 BS ISO 15698-1 - STEEL FOR THE REINFORCEMENT OF CONCRETE - HEADED BARS - PART 1: REQUIREMENTS
API 611 REDLINE : 2008 GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
DIN EN 14399-10 E : 2009 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD
API 677 :2006 GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES
BS EN ISO 14581:2013 Fasteners. Hexalobular socket countersunk flat head screws
BS ISO 6550-3:2013 Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing M10 glow-plugs
14/30297664 DC : 0 BS EN 3645-001 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, SCOOP-PROOF, TRIPLE START THREADED COUPLING, OPERATING TEMPERATURE 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
NF EN ISO 7380-1 : 2011 BUTTON HEAD SCREWS - PART 1: HEXAGON SOCKET BUTTON HEAD SCREWS
09/30171555 DC : DRAFT SEP 2009 BS EN ISO 10437 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - STEAM TURBINES - SPECIAL-PURPOSE APPLICATIONS
DIN EN 1515-4:2010-04 Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
06/30029245 DC : 0 EN 3660-062 - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 062: CABLE OUTLET, STYLE K, 90 DEGREE, FOR HEAT SHRINKABLE BOOT SHIELDED, SEALED, SELF LOCKING - PRODUCT STANDARD
CSA C22.2 No. 61730-1 : 2011 : INC : AMD 2 : 2015 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
API 677 : 2006 : R2016 GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES
97/713936 DC : DRAFT AUG 1997 PREN 13000 - CRANES - SAFETY - MOBILE CRANES
CEI EN 50243 : 2002 OUTDOOR BUSHINGS FOR 24 KV AND 36 KV AND FOR 5 KA AND 8 KA, FOR LIQUID FILLED TRANSFORMERS
DIN 202:1999-11 SCREW THREADS - GENERAL PLAN
NF EN 61730-1 : 2007 AMD 11 2015 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
DIN ISO 6162-1:2006-02 HYDRAULIC FLUID POWER - FLANGE CONNECTORS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 1: FLANGE CONNECTORS FOR USE AT PRESSURES OF 3,5 MPA (35 BAR) TO 35 MPA (350 BAR), DN 13 TO DN 127
04/30124528 DC : DRAFT OCT 2004 ISO/DIS 6149-1 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 1: PORTS WITH TRUNCATED HOUSING FOR O-RING SEAL
BS ISO 2704:1998 Road vehicles. M10 x 1 spark plugs with flat seating and their cylinder head housings
DIN ISO 3903:2015-12 SHIPS AND MARINE TECHNOLOGY - SHIPS' ORDINARY RECTANGULAR WINDOWS (ISO 3903:2012)
UNI EN ISO 19879 : 2011 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER CONNECTIONS
API 673 : 2014 CENTRIFUGAL FANS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
05/30127096 DC : DRAFT FEB 2005 ISO 6149-4 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH METRIC THREADS AND O-RING SEALING - PART 4: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR EXTERNAL HEX AND INTERNAL HEX PORT PLUGS
BS ISO 4161:2012 Hexagon nuts with flange, style 2. Coarse thread
09/30199068 DC : 0 BS ISO 11926-3 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 263 INCH THREADS AND O-RING SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS
ONORM EN ISO 8434-1 : 2009 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
07/30174056 DC : 0 BS EN 60065 - AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
06/30151815 DC : 0 BS ISO 898-1 - MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS
BS ISO 2110:1989 Information technology. Data communication. 25-pole DTE/DCE interface connector and contact number assignments
BS ISO 5483:2003 Ships and marine technology. Drain facilities from oil and water tanks
ISO 12126:2012 Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch thread, style 2 — Product grades A and B
CSA C22.2 No. 62109-1 : 2016 SAFETY OF POWER CONVERTERS FOR USE IN PHOTOVOLTAIC POWER SYSTEMS - PART 1: GENERAL REQUIREMENTS
03/313530 DC : DRAFT AUG 2003 ISO 16246 - ROAD VEHICLES - M12 X 1.25 SPARK-PLUGS WITH FLAT SEATING AND 14 MM HEXAGON AND THEIR CYLINDER HEAD HOUSING
UNE-EN 14399-3:2016 High-strength structural bolting assemblies for preloading - Part 3: System HR - Hexagon bolt and nut assemblies
NF ISO 8434-6 : 2009 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 6: 60 DEGREES CONE CONNECTORS WITH OR WITHOUT O-RING
UNI ISO 12151-4 : 2012 CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 4: HOSE FITTINGS WITH ISO 6149 METRIC STUD ENDS
API 682 : 2014 PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS
CSA ISO 4903 : 1995 : R2004 INFORMATION TECHNOLOGY - DATA COMMUNICATION - 15-POLE DTE/DCE INTERFACE CONNECTER AND CONTACT NUMBER ASSIGNMENTS
DIN ISO 6162-2:2006-02 HYDRAULIC FLUID POWER - FLANGE CONNECTORS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 2: FLANGE CONNECTORS FOR USE AT PRESSURES OF 35 MPA (350 BAR) TO 40 MPA (400 BAR), DN 13 TO DN 51
API 619 : 2010 ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
PREN 3795 : 200P1 AEROSPACE SERIES - ANAEROBIC POLYMERISABLE COMPOUNDS - TEST METHOD - DETERMINATION OF FREEDOM FROM EXCESSIVE CURE RATE
API 619 REDLINE : 2010 ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
PREN 14399-7 : DRAFT 2015 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 7: SYSTEM HR - COUNTERSUNK HEAD BOLT AND NUT ASSEMBLIES
CSA HGV 4.5 : 2013 STANDARD FOR PRIORITY AND SEQUENCING EQUIPMENT FOR HYDROGEN VEHICLE FUELING
I.S. EN ISO 9168:2009 DENTISTRY - HOSE CONNECTORS FOR AIR DRIVEN DENTAL HANDPIECES
I.S. EN ISO 4766:2011 SLOTTED SET SCREWS WITH FLAT POINT
I.S. EN 61730-1:2007 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
I.S. EN 14399-7:2007 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 7: SYSTEM HR - COUNTERSUNK HEAD BOLT AND NUT ASSEMBLIES
CSA HGV 4.7:2013:(R2018) AUTOMATIC VALVES FOR USE IN GASEOUS HYDROGEN VEHICLE FUELING STATIONS
ISO 22977:2005 Road vehicles M12 x 1,25 spark-plugs with flat seating and 14 mm bi-hexagon and their cylinder head housing
I.S. EN IEC 62688:2018 CONCENTRATOR PHOTOVOLTAIC (CPV) MODULES AND ASSEMBLIES - SAFETY QUALIFICATION
ISO 6162-2:2018 Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76
UNI EN 14399-8 : 2008 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES
SAE J 1949 : 2015 ROAD VEHICLES - HIGH PRESSURE FUEL INJECTION PIPE END-CONNECTIONS WITH 60 DEGREE FEMALE CONE
ISO 28741:2013 Road vehicles — Spark-plugs and their cylinder head housings — Basic characteristics and dimensions
CSA 6.5 : 2015 AUTOMATIC VALVES FOR GAS APPLIANCES
ISO 3019-2:2001 Hydraulic fluid power — Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors — Part 2: Metric series
BS ISO 8434-3:2005 Metallic tube connections for fluid power and general use O-ring face seal connectors
I.S. EN ISO 6149-4:2017 CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 4: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR EXTERNAL HEX AND INTERNAL HEX PORT PLUGS (ISO 6149-4:2017)
BS ISO 2974:2018 Diesel engines. 60° female cones for high-pressure fuel injection components
DIN EN 14399-7:2016-01 (Draft) HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 7: SYSTEM HR - COUNTERSUNK HEAD BOLT AND NUT ASSEMBLIES
IEC 60950:1999 Safety of information technology equipment
ISO 5483:2003 Ships and marine technology — Drain facilities from oil and water tanks
I.S. EN 14399-8:2007 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES
ISO 262:1998 ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts
IEC 60191-1:2018 Mechanical standardization of semiconductor devices - Part 1: General rules for the preparation of outline drawings of discrete devices
ISO 6162:1994 Hydraulic fluid power Four-screw split-flange connections for use at pressures of 2,5 MPa to 40 MPa (25 bar to 400 bar) Type I metric series and type II inch series
ISO 3506-1:2009 Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs
ISO 3506-3:2009 Mechanical properties of corrosion-resistant stainless steel fasteners Part 3: Set screws and similar fasteners not under tensile stress
DIN EN ISO 6149-3:2007-05 Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends (ISO 6149-3:2006)
DIN EN 14399-4:2015-04 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 4: SYSTEM HV - HEXAGON BOLT AND NUT ASSEMBLIES
DIN EN ISO 9409-1:2004-09 MANIPULATING INDUSTRIAL ROBOTS - MECHANICAL INTERFACES - PART 1: PLATES
DIN EN ISO 10511:2016-05 (Draft) PREVAILING TORQUE TYPE HEXAGON THIN NUTS (WITH NON-METALLIC INSERT) (ISO 10511:2012)
DIN EN ISO 1207:2011-10 Slotted cheese head screws - Product grade A (ISO 1207:2011)
DIN EN ISO 6149-2:2007-05 Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends (ISO 6149-2:2006)
DIN EN ISO 10513:2016-05 (Draft) PREVAILING TORQUE TYPE ALL-METAL HEXAGON HIGH NUTS WITH METRIC FINE PITCH THREAD - PROPERTY CLASSES 8, 10 AND 12 (ISO 10513:2012)
DIN EN 24015:1991-12 Hexagon head bolts with reduced shank (shank diameter pitch diameter); product grade B (ISO 4015:1979)
UNE-EN ISO 7045:2012 Pan head screws with type H or type Z cross recess - Product grade A (ISO 7045:2011)
UNE-EN ISO 7042:2013 Prevailing torque type all-metal hexagon high nuts - Property classes 5, 8, 10 and 12 (ISO 7042:2012)
BS ISO 13691 : 2001 AMD 14307 PETROLEUM AND NATURAL GAS INDUSTRIES - HIGH-SPEED SPECIAL-PURPOSE GEAR UNITS
BS EN ISO 9409-2:2003 Manipulating industrial robots. Mechanical interfaces Shafts
UNE-EN ISO 7040:2013 Prevailing torque type hexagon regular nuts (with non-metallic insert) - Property classes 5, 8 and 10 (ISO 7040:2012)
ISO 14584:2011 Hexalobular socket raised countersunk head screws
BS EN ISO 13631:2002 Petroleum and natural gas industries. Packaged reciprocating gas compressors
BS EN 24766:1992 Slotted set screws with flat point
UNE-EN ISO 14583:2011 Hexalobular socket pan head screws (ISO 14583:2011)
ISO 2010:2011 Slotted raised countersunk head screws Product grade A
BS EN ISO 7046-1:2011 Countersunk flat head screws (common head style) with type H or type Z cross recess. Product grade A Steel of property class 4.8
UNE-EN ISO 10511:2013 Prevailing torque type hexagon thin nuts (with non-metallic insert) (ISO 10511:2012)
BS EN ISO 2009:2011 Slotted countersunk flat head screws. Product grade A
IEC 62109-1:2010 Safety of power converters for use in photovoltaic power systems - Part 1: General requirements
BS EN ISO 9974-2:2000 Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Stud ends with elastomeric sealing (type E)
BS EN 13617-2:2012 Petrol filling stations Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers
BS EN 116:2015 Diesel and domestic heating fuels. Determination of cold filter plugging point. Stepwise cooling bath method
BS EN ISO 6149-2:2007 Connections for hydraulic fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends
BS EN ISO 2010:2011 Slotted raised countersunk head screws. Product grade A
BS EN ISO 21049:2004 Pumps. Shaft sealing systems for centrifugal and rotary pumps
ISO 13709:2009 Centrifugal pumps for petroleum, petrochemical and natural gas industries
BS EN ISO 4026:2003 Hexagon socket set screws with flat point
BS EN ISO 7040:2012 Prevailing torque type hexagon regular nuts (with non-metallic insert). Property classes 5, 8 and 10
BS EN ISO 6410-1:1996 Technical drawings. Screw threads and threaded parts General conventions
BS EN ISO 898-5:2012 Mechanical properties of fasteners made of carbon steel and alloy steel Set screws and similar threaded fasteners with specified hardness classes. Coarse thread and fine pitch thread
DIN VDE 0805 : 1990 AMD 1 1991 SAFETY OF INFORMATION TECHNOLOGY EQUIPMENT INCLUDING ELECTRICAL BUSINESS EQUIPMENT
ONORM EN 13617-4 : 2012 PETROL FILLING STATIONS - PART 4: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SWIVELS FOR USE ON METERING PUMPS AND DISPENSERS
DIN 2174:1998-09 COLD-FORMING TAPS FOR ISO METRIC COARSE PITCH THREAD M2 TO M16 AND ISO METRIC FINE PITCH THREAD M3 X 0.25 TO M24 X 2 - DIMENSIONS
DIN EN ISO 14583:2011-06 Hexalobular socket pan head screws (ISO 14583:2011)
EN 60191-1:2007 Mechanical standardization of semiconductor devices - Part 1: General rules for the preparation of outline drawings of discrete devices
DIN EN ISO 21269:2004-06 HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD
EN 61730-1:2007/A11:2014 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION (IEC 61730-1:2004, MODIFIED)
DIN EN ISO 898-6:1996-02 MECHANICAL PROPERTIES OF FASTENERS - PART 6: NUTS WITH SPECIFIED PROOF LOAD VALUES - FINE PITCH THREAD
EN 60950:2000/corrigendum:2002 SAFETY OF INFORMATION TECHNOLOGY EQUIPMENT
DIN EN ISO 14580:2011-06 Hexalobular socket cheese head screws (ISO 14580:2011)
DIN EN ISO 898-2:2012-08 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012)
DIN EN ISO 4028:2004-05 Hexagon socket set screws with dog point (ISO 4028:2003)
BS 4681:1991 Specification for reusable metal dental mirrors and handles
BS 415(1998) : 1998 AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
ASME B1.13M:2005 METRIC SCREW THREADS - M PROFILE
ASME B1.13M : 2005 (R2015) METRIC SCREW THREADS - M PROFILE
ASME B1.13M : 2005 : R2010 METRIC SCREW THREADS - M PROFILE
CSA/ANSI LC 6:08 (R2018) Natural gas operated diaphragm pumps
BS 7002(1992) : AMD 9831 SPECIFICATION FOR SAFETY OF INFORMATION TECHNOLOGY EQUIPMENT, INCLUDING ELECTRICAL BUSINESS EQUIPMENT
CSA/ANSI Z21.21 : 2015 AUTOMATIC VALVES FOR GAS APPLIANCES

ISO 724:1993 ISO general-purpose metric screw threads — Basic dimensions
ISO 5408:2009 Screw threads Vocabulary
ISO 262:1998 ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts
ISO 68-1:1998 ISO general purpose screw threads — Basic profile — Part 1: Metric screw threads
ISO 965-1:2013 ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data

View more information
£39.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.