• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ISO 2854:1976

Current
Current

The latest, up-to-date edition.

Statistical interpretation of data — Techniques of estimation and tests relating to means and variances
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English, French

Published date

01-02-1976

Comparison of a variance with a given value, estimation of a variance, comparison of two variances, estimation of the ratio of two variances, and the same procedures for a mean with known or unknown variance are dealt with. Techniques are valid for sample elements drawn at random and being independent, when the distribution of the observed variable is normal, for a sample size not too small (5 to 10 at least) approximately also when the distribution does not deviate very much from the normal. Techniques of verification of the hypothesis of normality are briefly dealt with in the examples.

DevelopmentNote
Also numbered as BS 2846-4(1976) (06/2005)
DocumentType
Standard
Pages
46
PublisherName
International Organization for Standardization
Status
Current

Standards Relationship
NBN X 03 002 : 1985 Identical
PN ISO 2854 : 1994 Identical
UNI ISO 2854 : 1988 Identical
UNE 66050:1978 Identical
UNE 66047:1978 Identical
UNE 66052:1978 Identical
UNE 66045:1978 Identical
NFX 06 072 : 1978 Similar to
NFX 06 055 : 1987 Similar to
UNE 66046:1978 Identical
NFX 06 054 : 1987 Similar to
UNE 66049:1978 Identical
UNE 66059:1978 IN Identical
NFX 06 063 : 1987 Similar to
NFX 06 051 : 1987 Similar to
NFX 06 053 : 1987 Similar to
NFX 06 062 : 1987 Similar to
NFX 06 056 : 1987 Similar to
NFX 06 061 : 1987 Similar to
UNE 66053:1978 Identical
UNE 66056:1978 Identical
UNE 66051:1978 Identical
NFX 06 058 : 1987 Similar to
NFX 06 057 : 1987 Similar to
UNE 66054:1978 Identical
UNE 66048:1978 Identical
NFX 06 060 : 1987 Similar to

CEI 56-39 : 2000 GOODNESS-OF-FIT TESTS, CONFIDENCE INTERVALS AND LOWER CONFIDENCE LIMITS FOR WEIBULL DISTRIBUTED DATA
PD CR 14245:2001 Guidelines for the application of EN 197-2. Conformity Evaluation
09/30205529 DC : 0 BS EN 459-3 - BUILDING LIME - PART 3: CONFORMITY EVALUATION
CEI EN 62058-11 : 2011 ELECTRICITY METERING EQUIPMENT (A/C/) - ACCEPTANCE INSPECTION - PART 11: GENERAL ACCEPTANCE INSPECTION METHODS
BS ISO 5667-12:2017 Water quality. Sampling Guidance on sampling of bottom sediments from rivers, lakes and estuarine areas
S.R. CEN/TR 15840:2009 EVALUATION OF CONFORMITY OF FLY ASH FOR CONCRETE - GUIDELINES FOR THE APPLICATION OF EN 450-2
02/104526 DC : DRAFT JULY 2002 EN 13263-2 - SILICA FUME FOR CONCRETE - PART 2: CONFORMITY EVALUATION
ONORM EN ISO 12958 : 2010 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF WATER FLOW CAPACITY IN THEIR PLANE
DIN EN 1006:2009-10 Advanced technical ceramics - Monolithic ceramics - Guidance on the selection of test pieces for the evaluation of properties
11/30218527 DC : 0 BS ISO 17123-5 - OPTICS AND OPTICAL INSTRUMENTS - FIELD PROCEDURES FOR TESTING GEODETIC AND SURVEYING INSTRUMENTS - PART 5: TOTAL STATIONS
BS 2846-3:1975 Guide to statistical interpretation of data Determination of a statistical tolerance interval
12/30247200 DC : 0 BS ISO 3951-1 - SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 1: SPECIFICATION FOR SINGLE SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION FOR A SINGLE QUALITY CHARACTERISTIC AND A SINGLE AQL
15/30318694 DC : 0 BS ISO 12828-2 - VALIDATION METHODS FOR FIRE GAS ANALYSES - PART 2: VALIDATION OF QUANTIFICATION METHOD
17/30338834 DC : 0 BS EN ISO 11058 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF WATER PERMEABILITY CHARACTERISTICS NORMAL TO THE PLANE, WITHOUT LOAD
BS 6002-4.1:1994 Sampling procedures for inspection by variables. Specification for sequential sampling plans for percent nonconforming. Known standard deviation
DD ENV 1006:2003 Advanced technical ceramics. Monolithic ceramics. Guidance on the selection of test pieces for the evaluation of properties
DD ENV 197-2:1996 Cement Conformity evaluation
18/30333968 DC : 0 BS ISO 8573-4 - COMPRESSED AIR - CONTAMINANT MEASUREMENT - PART 4: PARTICLE CONTENT
BS ISO 16269-6:2014 Statistical interpretation of data Determination of statistical tolerance intervals
08/30185918 DC : 0 BS EN 1006 - ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - GUIDANCE ON THE SELECTION OF TEST PIECES FOR THE EVALUATION OF PROPERTIES
BS ISO 11648-1:2003 Statistical aspects of sampling from bulk materials General principles
BS EN 61649:2008 Weibull analysis
05/30130595 DC : DRAFT MAR 2005 BS EN 15167-2 - GROUND GRANULATED BLASTFURNACE SLAG FOR USE IN CONCRETE, MORTAR AND GROUT - PART 2: CONFORMITY EVALUATION
CSA ISO/TR 10017 : 2003 : R2013 GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000
BS EN 61810-2:2017 Electromechanical elementary relays Reliability
ISO 22514-7:2012 Statistical methods in process management Capability and performance Part 7: Capability of measurement processes
I.S. EN ISO 10776:2012 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF WATER PERMEABILITY CHARACTERISTICS NORMAL TO THE PLANE, UNDER LOAD (ISO 10776:2012)
I.S. EN 61649:2008 WEIBULL ANALYSIS
DD CEN/TS 14632:2006 Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure. Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP). Guidance for the assessment of conformity
IEC 60810:2017 Lamps, light sources and LED packages for road vehicles - Performance requirements
ISO 16269-6:2014 Statistical interpretation of data Part 6: Determination of statistical tolerance intervals
ISO 12828-2:2016 Validation method for fire gas analysis Part 2: Intralaboratory validation of quantification methods
ISO 3951-3:2007 Sampling procedures for inspection by variables Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
ISO 3951-5:2006 Sampling procedures for inspection by variables Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation)
DIN EN ISO 10456:2010-05 Building materials and products - Hygrothermal properties - Tabulated design values and procedures for determining declared and design thermal values (ISO 10456:2007 + Cor. 1:2009); German version EN ISO 10456:2007 + AC:2009
UNE-EN ISO 12958:2010 Geotextiles and geotextile-related products - Determination of water flow capacity in their plane (ISO 12958:2010)
BS EN 450-2:2005 Fly ash for concrete Conformity evaluation
BS EN ISO 16890-2:2016 Air filters for general ventilation Measurement of fractional efficiency and air flow resistance
UNE-EN ISO 16890-2:2017 Air filters for general ventilation - Part 2: Measurement of fractional efficiency and air flow resistance (ISO 16890-2:2016)
BS EN ISO 11058:2010 Geotextiles and geotextile-related products. Determination of water permeability characteristics normal to the plane, without load
EN 197-2:2014 Cement - Part 2: Conformity evaluation
BS EN 326-2 : 2010 WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL
15/30278074 DC : 0 BS EN ISO 16890-3 - AIR FILTERS FOR GENERAL VENTILATION - PART 3: DETERMINATION OF THE GRAVIMETRIC EFFICIENCY AND THE AIR FLOW RESISTANCE VERSUS THE MASS OF TEST DUST CAPTURED
UNE-EN ISO 16890-3:2017 Air filters for general ventilation - Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured (ISO 16890-3:2016)
BS EN ISO 16890-3:2016 Air filters for general ventilation Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured
DIN EN ISO 15007-1:2003-10 ROAD VEHICLES - MEASUREMENT OF DRIVER VISUAL BEHAVIOUR WITH RESPECT TO TRANSPORT INFORMATION AND CONTROL SYSTEMS - PART 1: DEFINITIONS AND PARAMETERS
EN 12603:2002 Glass in building - Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data
EN 60810 : 2018 LAMPS, LIGHT SOURCES AND LED PACKAGES FOR ROAD VEHICLES - PERFORMANCE REQUIREMENTS
EN ISO 10456:2007/AC:2009 BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES AND PROCEDURES FOR DETERMINING DECLARED AND DESIGN THERMAL VALUES
EN 12260:2003 Water quality - Determination of nitrogen - Determination of bound nitrogen (TNb), following oxidation to nitrogen oxides
EN 1006:2009 Advanced technical ceramics - Monolithic ceramics - Guidance on the selection of test pieces for the evaluation of properties
ENV 197-2 : 1995 CEMENT - CONFORMITY EVALUATION
UNI EN ISO 29461-1 : 2013 AIR INTAKE FILTER SYSTEMS FOR ROTARY MACHINERY - TEST METHODS - PART 1: STATIC FILTER ELEMENTS
EN 61649:2008 Weibull analysis
I.S. EN IEC 60810:2018 LAMPS, LIGHT SOURCES AND LED PACKAGES FOR ROAD VEHICLES - PERFORMANCE REQUIREMENTS
07/30112904 DC : 0 BS IEC 61649 - WEIBULL ANALYSIS - GOODNESS-OF-FIT TESTS AND CONFIDENCE INTERVALS FOR WEIBULL DISTRIBUTED DATA
I.S. EN ISO 16890-3:2016 AIR FILTERS FOR GENERAL VENTILATION - PART 3: DETERMINATION OF THE GRAVIMETRIC EFFICIENCY AND THE AIR FLOW RESISTANCE VERSUS THE MASS OF TEST DUST CAPTURED (ISO 16890-3:2016)
I.S. EN 1482-1:2007 FERTILIZERS AND LIMING MATERIALS - SAMPLING AND SAMPLE PREPARATION - PART 1: SAMPLING
I.S. EN ISO 16890-2:2016 AIR FILTERS FOR GENERAL VENTILATION - PART 2: MEASUREMENT OF FRACTIONAL EFFICIENCY AND AIR FLOW RESISTANCE (ISO 16890-2:2016)
I.S. EN 779:2012 PARTICULATE AIR FILTERS FOR GENERAL VENTILATION - DETERMINATION OF THE FILTRATION PERFORMANCE
17/30335786 DC : 0 BS ISO 19867-1 - CLEAN COOKSTOVES AND CLEAN COOKING SOLUTIONS - HARMONIZED LABORATORY TEST PROTOCOLS - PART 1: STANDARD TEST SEQUENCE FOR EMISSIONS AND PERFORMANCE, SAFETY AND DURABILITY
05/30136177 DC : DRAFT JULY 2005 EN 1482-1 - FERTILIZERS AND LIMING MATERIALS - SAMPLING AND SAMPLE PREPARATION - PART 1: SAMPLING
DIN EN ISO 10776:2012-12 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF WATER PERMEABILITY CHARACTERISTICS NORMAL TO THE PLANE, UNDER LOAD (ISO 10776:2012)
09/30204392 DC : 0 BS ISO 12958 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF WATER FLOW CAPACITY IN THEIR PLANE
ISO 12500-2:2007 Filters for compressed air — Test methods — Part 2: Oil vapours
ONORM EN ISO 11058 : 2010 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF WATER PERMEABILITY CHARACTERISTICS NORMAL TO THE PLANE, WITHOUT LOAD
BS ISO 3951-4:2011 Sampling procedures for inspection by variables Procedures for assessment of declared quality levels
BS ISO 22514-7:2012 Statistical methods in process management. Capability and performance Capability of measurement processes
NF EN 61649 : 2008 WEIBULL ANALYSIS
03/102154 DC : DRAFT MAY 2003 CEN TS 14632 - PLASTICS PIPING SYSTEMS FOR DRAINAGE, SEWERAGE AND WATER SUPPLY, PRESSURE AND NON-PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
12/30242633 DC : 0 BS ISO 16269-6 - STATISTICAL INTERPRETATION OF DATA - PART 6: DETERMINATION OF STATISTICAL TOLERANCE INTERVALS
BS ISO 8573-4:2001 Compressed air Test methods for solid particle content
BS ISO 8423:2008 Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)
DIN ISO 3951:1992-08 SAMPLING PROCEDURES AND CHARTS FOR INSPECTION BY VARIABLES FOR PERCENT NONCONFORMING
PD IEC/TS 62282-7-2:2014 Fuel cell technologies Test methods. Single cell and stack performance tests for solid oxide fuel cells (SOFC)
12/30254896 DC : 0 BS EN 197-2 - CEMENT - PART 2: CONFORMITY EVALUATION
05/30135474 DC : DRAFT JUNE 2005 BS 600 - A GUIDE TO THE APPLICATION OF STATISTICAL METHODS TO QUALITY AND STANDARDIZATION
BS ISO 7183:2007 Compressed-air dryers. Specifications and testing
08/30168462 DC : DRAFT APR 2008 BS ISO 1217 - DISPLACEMENT COMPRESSORS - ACCEPTANCE TEST
14/30298580 DC : 0 BS EN 16480 - PUMPS - MINIMUM REQUIRED EFFICIENCY OF ROTODYNAMIC WATER PUMPS
I.S. EN 1006:2009 ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - GUIDANCE ON THE SELECTION OF TEST PIECES FOR THE EVALUATION OF PROPERTIES
I.S. EN 60810:2015 LAMPS FOR ROAD VEHICLES - PERFORMANCE REQUIREMENTS
UNE-EN 62058-11:2011 Electricity metering equipment (a.c.) - Acceptance inspection -- Part 11: General acceptance inspection methods
IEC 61810-2:2017 Electromechanical elementary relays - Part 2: Reliability
EN 61810-2:2017 Electromechanical elementary relays - Part 2: Reliability
PREN 16480 : DRAFT 2017 PUMPS - ROTODYNAMIC PUMPS - MINIMUM REQUIRED EFFICIENCY OF WATER PUMPS AND METHODS OF QUALIFICATION AND VERIFICATION
DIN EN 197-2:2014-05 CEMENT - PART 2: CONFORMITY EVALUATION
ISO 7183:2007 Compressed-air dryers Specifications and testing
DIN EN 326-2:2014-10 Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control; German version EN 326-2:2010+A1:2014
DIN EN ISO 16890-3:2015-08 (Draft) AIR FILTERS FOR GENERAL VENTILATION - PART 3: DETERMINATION OF THE GRAVIMETRIC EFFICIENCY AND THE AIR FLOW RESISTANCE VERSUS THE MASS OF TEST DUST CAPTURED (ISO 16890-3:2016)
DD ISO/TS 21220:2009 Particulate air filters for general ventilation. Determination of filtration performance
IEC 62058-11:2008 Electricity metering equipment (AC) - Acceptance inspection - Part 11: General acceptance inspection methods
ISO 10456:2007 Building materials and products — Hygrothermal properties — Tabulated design values and procedures for determining declared and design thermal values
I.S. EN ISO 10456:2007 BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES AND PROCEDURES FOR DETERMINING DECLARED AND DESIGN THERMAL VALUES
I.S. EN ISO 15007-1:2014 ROAD VEHICLES - MEASUREMENT OF DRIVER VISUAL BEHAVIOUR WITH RESPECT TO TRANSPORT INFORMATION AND CONTROL SYSTEMS - PART 1: DEFINITIONS AND PARAMETERS (ISO 15007-1:2014)
I.S. EN ISO 12958:2010 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF WATER FLOW CAPACITY IN THEIR PLANE
DIN EN 197-2:2000-11 CEMENT - PART 2: CONFORMITY EVALUATION
UNI EN ISO 12958 : 2010 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF WATER FLOW CAPACITY IN THEIR PLANE
I.S. EN 326-2:2010 WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL
UNI ISO/TR 18532 : 2010 Guide to the application of statistical methods for quality and standardization in the industrial sector
BS 6000:1996 Guide for the selection of an acceptance sampling system, scheme or plan for inspection of discrete items in lots
DIN EN ISO 16890-3:2017-08 AIR FILTERS FOR GENERAL VENTILATION - PART 3: DETERMINATION OF THE GRAVIMETRIC EFFICIENCY AND THE AIR FLOW RESISTANCE VERSUS THE MASS OF TEST DUST CAPTURED (ISO 16890-3:2016)
BS 2846-7:1997 Guide to statistical interpretation of data Tests for departure from normality
I.S. EN 12260:2003 WATER QUALITY - DETERMINATION OF NITROGEN - DETERMINATION OF BOUND NITROGEN (TNB), FOLLOWING OXIDATION TO NITROGEN OXIDES
I.S. EN 450-2:2005 FLY ASH FOR CONCRETE - PART 2: CONFORMITY EVALUATION
BS EN 62058-11:2010 Electricity metering equipment (a.c.). Acceptance inspection General acceptance inspection methods
16/30314233 DC : 0 BS ISO 6658 - SENSORY ANALYSIS - METHODOLOGY - GENERAL GUIDANCE
PD CEN/TR 14245:2014 Cement. Guidelines for the application of EN 197-2 Conformity Evaluation
03/312758 DC : DRAFT AUG 2003 ISO 6658 - SENSORY ANALYSIS - METHODOLOGY - GENERAL GUIDANCE
02/400873 DC : DRAFT OCT 2002 BS 6002-1 - SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 1: SPECIFICATION FOR SINGLE SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION FOR A SINGLE QUALITY CHARACTERISTIC AND A SINGLE AQL
BS ISO 8573-5:2001 Compressed air Test methods for oil vapour and organic solvent content
ISO 8573-4:2001 Compressed air Part 4: Test methods for solid particle content
ISO/TR 18532:2009 Guidance on the application of statistical methods to quality and to industrial standardization
UNE-ISO 16269-6:2015 Statistical interpretation of data - Part 6: Determination of statistical tolerance intervals
09/30142128 DC : 0 BS ISO 11462-2 - GUIDELINES FOR IMPLEMENTATION OF STATISTICAL PROCESS CONTROL (SPC) - PART 2: CATALOGUE OF TOOLS AND TECHNIQUES
BS EN 1006:2009 Advanced technical ceramics. Monolithic ceramics. Guidance on the selection of test pieces for the evaluation of properties
I.S. EN 62058-11:2010 ELECTRICITY METERING EQUIPMENT (A.C.) - ACCEPTANCE INSPECTION - PART 11: GENERAL ACCEPTANCE INSPECTION METHODS
16/30269189 DC : DRAFT JAN 2016 BS ISO 5667-12 - WATER QUALITY - SAMPLING - PART 12: GUIDANCE ON SAMPLING OF BOTTOM SEDIMENTS
BS EN ISO 10776:2012 Geotextiles and geotextile-related products. Determination of water permeability characteristics normal to the plane, under load
S.R. CEN/TR 14245:2014 CEMENT - GUIDELINES FOR THE APPLICATION OF EN 197-2 CONFORMITY EVALUATION
02/100390 DC : DRAFT JAN 2002 PREN 450-2 - FLY ASH FOR CONCRETE - PART 2: CONFORMITY EVALUATION
ISO 1217:2009 Displacement compressors Acceptance tests
UNI ISO 22514-7:2014 STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 7: CAPABILITY OF MEASUREMENT PROCESSES
BS ISO 1217 : 2009 DISPLACEMENT COMPRESSORS - ACCEPTANCE TESTS
ISO 11648-1:2003 Statistical aspects of sampling from bulk materials Part 1: General principles
ISO 6658:2017 Sensory analysis — Methodology — General guidance
BS EN IEC 60810:2018 Lamps, light sources and led packages for road vehicles. Performance requirements
PREN 197-2 : DRAFT 2012 CEMENT - PART 2: CONFORMITY EVALUATION
UNI ISO/TR 8550-3 : 2014 GUIDANCE ON THE SELECTION AND USAGE OF ACCEPTANCE SAMPLING SYSTEMS FOR INSPECTION OF DISCRETE ITEMS IN LOTS - PART 3: SAMPLING BY VARIABLES
ISO 11058:2010 Geotextiles and geotextile-related products Determination of water permeability characteristics normal to the plane, without load
ISO 12500-1:2007 Filters for compressed air Test methods Part 1: Oil aerosols
ISO 5667-10:1992 Water quality Sampling Part 10: Guidance on sampling of waste waters
I.S. EN ISO 11058:2010 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF WATER PERMEABILITY CHARACTERISTICS NORMAL TO THE PLANE, WITHOUT LOAD
NF EN ISO 11058 : 2010 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF WATER PERMEABILITY CHARACTERISTICS NORMAL TO THE PLANE, WITHOUT LOAD
S.R. CR 14245:2001 GUIDELINES FOR THE APPLICATION OF EN 197-2 'CONFORMITY EVALUATION'
DIN EN 12260:2003-12 Water quality - Determination of nitrogen - Determination of bound nitrogen (TN), following oxidation to nitrogen oxides
DIN EN ISO 16890-2 E : 2017 AIR FILTERS FOR GENERAL VENTILATION - PART 2: MEASUREMENT OF FRACTIONAL EFFICIENCY AND AIR FLOW RESISTANCE (ISO 16890-2:2016)
DIN EN ISO 29461-1:2014-03 Air intake filter systems for rotary machinery - Test methods - Part 1: Static filter elements (ISO 29461-1:2013)
UNE-EN ISO 10456:2012 Building materials and products - Hygrothermal properties -Tabulated design values and procedures for determining declared and design thermal values (ISO 10456:2007)
BS EN 197-2:2014 Cement Conformity evaluation
ONORM EN 197-2 : 2014 CEMENT - PART 2: CONFORMITY EVALUATION
UNE-EN 779:2013 Particulate air filters for general ventilation - Determination of the filtration performance
DIN EN ISO 16890-2:2017-08 Air filters for general ventilation - Part 2: Measurement of fractional efficiency and air flow resistance (ISO 16890-2:2016)
UNI EN ISO 15007-1 : 2014 ROAD VEHICLES - MEASUREMENT OF DRIVER VISUAL BEHAVIOUR WITH RESPECT TO TRANSPORT INFORMATION AND CONTROL SYSTEMS - PART 1: DEFINITIONS AND PARAMETERS
UNI EN 15167-2 : 2006 GROUND GRANULATED BLAST FURNACE SLAG FOR USE IN CONCRETE, MORTAR AND GROUT - PART 2: CONFORMITY EVALUATION
BS 4200-3:1979 Guide on the reliability of electronic equipment and parts used therein Presentation of reliability data on electronic components (or parts)
UNI EN 326-2 : 2014 WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL
UNI EN ISO 11058 : 2010 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF WATER PERMEABILITY CHARACTERISTICS NORMAL TO THE PLANE, WITHOUT LOAD
ISO 29461-1:2013 Air intake filter systems for rotary machinery Test methods Part 1: Static filter elements
UNI EN ISO 10456 : 2008 BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES AND PROCEDURES FOR DETERMINING DECLARED AND DESIGN THERMAL VALUES
UNI ISO 13053-2 : 2014 QUANTITATIVE METHODS IN PROCESS IMPROVEMENT - SIX SIGMA - PART 2: TOOLS AND TECHNIQUES
UNI EN 779 : 2012 PARTICULATE AIR FILTERS FOR GENERAL VENTILATION - DETERMINATION OF THE FILTRATION PERFORMANCE
BS ISO 13053-2:2011 Quantitative methods in process improvement. Six Sigma Tools and techniques
BS IEC 60605-4:2001 Equipment reliability testing Statistical procedures for exponential distribution. Point estimates, confidence intervals, prediction intervals and tolerance intervals
UNI CEN/TR 14245 : 2015 CEMENT - GUIDELINES FOR THE APPLICATION OF EN 197-2 CONFORMITY EVALUATION
UNI EN ISO 10776 : 2012 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF WATER PERMEABILITY CHARACTERISTICS NORMAL TO THE PLANE, UNDER LOAD
BS 6068-2.83(2003) : 2003 WATER QUALITY - DETERMINATION OF NITROGEN - DETERMINATION OF BOUND NITROGEN (TN[B]), FOLLOWING OXIDATION TO NITROGEN OXIDES
17/30344899 DC : 0 BS ISO 17123-5 - OPTICS AND OPTICAL INSTRUMENTS - FIELD PROCEDURES FOR TESTING GEODETIC AND SURVEYING INSTRUMENTS - PART 5: TOTAL STATIONS
UNI EN 1006 : 2009 ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - GUIDANCE ON THE SELECTION OF TEST PIECES FOR THE EVALUATION OF PROPERTIES
UNI ISO 3951-4 : 2014 SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 4: PROCEDURES FOR ASSESSMENT OF DECLARED QUALITY LEVELS
BS ISO 3951-1:2013 Sampling procedures for inspection by variables Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
BS 6068-2.62(1998) : 1998 WATER QUALITY - PHYSICAL, CHEMICAL AND BIOCHEMICAL METHODS - DETERMINATION OF NITROGEN - METHOD USING OXIDATIVE DIGESTION WITH PEROXODISULFATE
BS ISO 12500-1:2007 Filters for compressed air. Test methods Oil aerosols
09/30196396 DC : 0 BS ISO 13822 - BASES FOR DESIGN OF STRUCTURES - ASSESSMENT OF EXISTING STRUCTURES
PD CEN/TR 15840:2009 Evaluation of conformity of fly ash for concrete. Guidelines for the application of EN 450-2
94/110814 DC : DRAFT JAN 1995 ISO/DIS 12576 - THERMAL INSULATING MATERIALS AND PRODUCTS FOR BUILDINGS - CONFORMITY CONTROL SYSTEMS
04/30119227 DC : DRAFT SEP 2004 BS ISO 6002-2 - SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 2: GENERAL SPECIFICATION FOR SINGLE SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION OF INDEPENDENT QUALITY CHARACTERISTICS
UNI ISO 11462-2 : 2014 GUIDELINES FOR IMPLEMENTATION OF STATISTICAL PROCESS CONTROL (SPC) - PART 2: CATALOGUE OF TOOLS AND TECHNIQUES
ISO 3951-1:2013 Sampling procedures for inspection by variables — Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
12/30227451 DC : DRAFT AUG 2012 BS EN 16480 - PUMPS - MINIMUM REQUIRED EFFICIENCY OF ROTODYNAMIC WATER PUMPS
PREN ISO 15007-1 : DRAFT 2013 ROAD VEHICLES - MEASUREMENT OF DRIVER VISUAL BEHAVIOUR WITH RESPECT TO TRANSPORT INFORMATION AND CONTROL SYSTEMS - PART 1: DEFINITIONS AND PARAMETERS (ISO/DIS 15007-1:2013)
BS ISO 8573-6:2003 Compressed air Test methods for gaseous contaminant content
BS ISO 19003:2006 Rubber and rubber products. Guidance on the application of statistics to physical testing
PD ISO/TR 10017:2003 Guidance on statistical techniques for ISO 9001:2000
UNE-ISO 3951-1:2012 Sampling procedures for inspection by variables -- Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
BS 6002-4:2006 Sampling procedures for inspection by variables Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation)
UNE-EN 61649:2012 Weibull analysis
UNI ISO 11648-1 : 2008 STATISTICAL ASPECTS OF SAMPLING FROM BULK MATERIALS - PART 1: GENERAL PRINCIPLES
GOST R ISO 16269-6 : 2005 STATISTICAL METHODS - STATISTICAL INTERPRETATION OF DATA - DETERMINATION OF STATISTICAL TOLERANCE INTERVALS
ISO 10576-1:2003 Statistical methods — Guidelines for the evaluation of conformity with specified requirements — Part 1: General principles
ISO 5667-12:2017 Water quality — Sampling — Part 12: Guidance on sampling of bottom sediments from rivers, lakes and estuarine areas
ISO 8688-2:1989 Tool life testing in milling — Part 2: End milling
PREN 459-3 : DRAFT 2009 BUILDING LIME - PART 3: CONFORMITY EVALUATION
EN IEC 60810:2018 Lamps, light sources and led packages for road vehicles - Performance requirements
ISO/TR 10017:2003 Guidance on statistical techniques for ISO 9001:2000
I.S. ENV 1006:2003 ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - GUIDANCE ON THE SELECTION OF TEST PIECES FOR THE EVALUATION OF PROPERTIES
ISO 39511:2018 Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)
ISO 14820-1:2016 Fertilizers and liming materials Sampling and sample preparation Part 1: Sampling
I.S. EN 61810-2:2017 ELECTROMECHANICAL ELEMENTARY RELAYS - PART 2: RELIABILITY
ISO 2602:1980 Statistical interpretation of test results Estimation of the mean Confidence interval
S.R. ISO/TR 10017:2003 GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000
CEN/TR 15840:2009 Evaluation of conformity of fly ash for concrete - Guidelines for the application of EN 450-2
PREN ISO 12958 : DRAFT 2009 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF WATER FLOW CAPACITY IN THEIR PLANE
ISO 11462-2:2010 Guidelines for implementation of statistical process control (SPC) — Part 2: Catalogue of tools and techniques
ISO 8573-5:2001 Compressed air — Part 5: Test methods for oil vapour and organic solvent content
ISO 14595:2014 Microbeam analysis — Electron probe microanalysis — Guidelines for the specification of certified reference materials (CRMs)
ISO/TR 8550-3:2007 Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots Part 3: Sampling by variables
DIN EN ISO 12958:2010-08 Geotextiles and geotextile-related products - Determination of water flow capacity in their plane (ISO 12958:2010)
16/30350012 DC : 0 BS EN 60810 - LAMPS, LIGHT SOURCES AND LED PACKAGES FOR ROAD VEHICLES - PERFORMANCE REQUIREMENTS
ISO 15007-1:2014 Road vehicles Measurement of driver visual behaviour with respect to transport information and control systems Part 1: Definitions and parameters
BS EN 779:2012 Particulate air filters for general ventilation. Determination of the filtration performance
ISO 12958:2010 Geotextiles and geotextile-related products Determination of water flow capacity in their plane
BS EN 12838:2000 Installations and equipment for liquefied natural gas. Suitability testing of LNG sampling systems
ISO 16890-2:2016 Air filters for general ventilation — Part 2: Measurement of fractional efficiency and air flow resistance
ISO 16890-3:2016 Air filters for general ventilation Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured
UNI EN 197-2 : 2014 CEMENT - PART 2: CONFORMITY EVALUATION
07/30113225 DC : 0 BS ISO 21220 - PARTICULATE AIR FILTERS FOR GENERAL VENTILATION - DETERMINATION OF THE FILTRATION PERFORMANCE
BS EN 12260:2003 Water quality. Determination of nitrogen. Determination of bound nitrogen (TN<sub>b</sub>), following oxidation to nitrogen oxides
BS EN ISO 15007-1:2014 Road vehicles. Measurement of driver visual behaviour with respect to transport information and control systems Definitions and parameters
BS EN 20140-2:1993 Determination, verification and application of precision data
ISO 10776:2012 Geotextiles and geotextile-related products — Determination of water permeability characteristics normal to the plane, under load
I.S. EN 197-2:2014 CEMENT - PART 2: CONFORMITY EVALUATION
CEN/TR 14245:2014 Cement - Guidelines for the application of EN 197-2 Conformity Evaluation
09/30200844 DC : 0 BS EN 779 - PARTICULATE AIR FILTERS FOR GENERAL VENTILATION - DETERMINATION OF THE FILTRATION PERFORMANCE
ISO/TS 21220:2009 Particulate air filters for general ventilation Determination of filtration performance
IEC 61649:2008 Weibull analysis
ISO 13053-2:2011 Quantitative methods in process improvement — Six Sigma — Part 2: Tools and techniques
UNE-EN ISO 29461-1:2014 Air intake filter systems for rotary machinery - Test methods - Part 1: Static filter elements (ISO 29461-1:2013)
UNE-ISO 13053-2:2012 Quantitative methods in process improvement -- Six Sigma -- Part 2: Tools and techniques
BS EN 60810:2015 Lamps for road vehicles. Performance requirements
10/30211683 DC : 0 BS EN ISO 29461-1 - AIR INTAKE FILTER SYSTEMS FOR ROTARY MACHINERY - TEST METHODS - PART 1: STATIC FILTER ELEMENTS
14/30268894 DC : 0 BS EN ISO 16890-2 - AIR FILTERS FOR GENERAL VENTILATION - PART 2: MEASUREMENT OF FRACTIONAL EFFICIENCY AND AIR FLOW RESISTANCE
BS EN ISO 10456:2007 Building materials and products. Hygrothermal properties. Tabulated design values and procedures for determining declared and design thermal values
UNE-ISO 3951-2:2012 Sampling procedures for inspection by variables -- Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
BS EN 13562:2000 Geotextiles and geotextile-related products. Determination of resistance to penetration by water (hydrostatic pressure test)
BS EN ISO 11905-1:1998 Water quality. Determination of nitrogen. Method using oxidative digestion with peroxodisulfate
BS EN 1482-1:2007 Fertilizers and liming materials. Sampling and sample preparation Sampling
UNE-EN ISO 15007-1:2015 Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Part 1: Definitions and parameters (ISO 15007-1:2014)
EN ISO 16890-2:2016 Air filters for general ventilation - Part 2: Measurement of fractional efficiency and air flow resistance (ISO 16890-2:2016)
EN 450-2:2005 Fly ash for concrete - Part 2: Conformity evaluation
ONORM EN ISO 29461-1 : 2014 AIR INTAKE FILTER SYSTEMS FOR ROTARY MACHINERY - TEST METHODS - PART 1: STATIC FILTER ELEMENTS (ISO 29461-1:2013)
EN 779:2012 Particulate air filters for general ventilation - Determination of the filtration performance
EN 1482-1:2007 Fertilizers and liming materials - Sampling and sample preparation - Part 1: Sampling
EN ISO 15007-1:2014 Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Part 1: Definitions and parameters (ISO 15007-1:2014)
EN 15167-2:2006 Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 2: Conformity evaluation
EN 326-2:2010+A1:2014 Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control
EN 918 : 1995 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DYNAMIC PERFORATION TEST (CONE DROP TEST)
EN ISO 10776:2012 Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane, under load (ISO 10776:2012)
EN ISO 12958:2010 Geotextiles and geotextile-related products - Determination of water flow capacity in their plane (ISO 12958:2010)
EN ISO 16890-3:2016 Air filters for general ventilation - Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured (ISO 16890-3:2016)
EN ISO 11058:2010 Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane, without load (ISO 11058:2010)
ISO 19003:2006 Rubber and rubber products — Guidance on the application of statistics to physical testing
13/30235808 DC : 0 BS EN ISO 15007-1 - ROAD VEHICLES - MEASUREMENT OF DRIVER VISUAL BEHAVIOUR WITH RESPECT TO TRANSPORT INFORMATION AND CONTROL SYSTEMS - PART 1: DEFINITIONS AND PARAMETERS
I.S. CEN TS 14632:2006 PLASTICS PIPING SYSTEMS FOR DRAINAGE, SEWERAGE AND WATER SUPPLY, PRESSURE AND NON-PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON POLYESTER RESIN (UP) - GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
07/30167025 DC : 0 BS EN 62058-11 - ELECTRICITY METERING EQUIPMENT (AC) - ACCEPTANCE INSPECTION - PART 11: GENERAL ACCEPTANCE INSPECTION METHODS
ISO 8423:2008 Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)
BS IEC 61649:1997 Procedures for goodness-of-fit tests, confidence intervals and lower confidence limits for Weibull distributed data
UNI ISO 3951-1 : 2014 SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 1: SPECIFICATION FOR SINGLE SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION FOR A SINGLE QUALITY CHARACTERISTIC AND A SINGLE AQL
BS ISO 10725:2000 Acceptance sampling plans and procedures for the inspection of bulk materials
BS ISO 14595:2014 Microbeam analysis. Electron probe microanalysis. Guidelines for the specification of certified reference materials (CRMs)
UNE-EN ISO 10776:2012 Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane, under load (ISO 10776:2012)
BS ISO 8573-3:1999 Compressed air Test methods for measurement of humidity
BS ISO 12500-2:2007 Filters for compressed air. Test methods Oil vapours
09/30175168 DC : 0 BS EN ISO 10769 - CLAY GEOSYNTHETIC BARRIERS (GBR-C) - DETERMINATION OF WATER ABSORPTION OF BENTONITE
00/708386 DC : DRAFT MAY 2000 ISO/DIS 15007-1 - ROAD VEHICLES - MEASUREMENT OF DRIVER VISUAL BEHAVIOUR WITH RESPECT TO TRANSPORT INFORMATION AND CONTROL SYSTEMS
BS 6002-5(2011) : 2011 SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PROCEDURES FOR ASSESSMENT OF DECLARED QUALITY LEVELS
CSA ISO/TR 10017:2003 GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000
03/102177 DC : DRAFT OCT 2003 BS ISO 16269-6 - STATISTICAL INTERPRETATION OF DATA - PART 6: DETERMINATION OF A STATISTICAL TOLERANCE INTERVAL
BS 6002-1:1993 Sampling procedures for inspection by variables Specification for single sampling plans indexed by acceptable quality level (AQL) for lot-by-lot inspection
ISO 3951-4:2011 Sampling procedures for inspection by variables — Part 4: Procedures for assessment of declared quality levels
ISO 8688-1:1989 Tool life testing in milling — Part 1: Face milling
ISO 13822:2010 Bases for design of structures Assessment of existing structures
ISO 19867-1:2018 Clean cookstoves and clean cooking solutions — Harmonized laboratory test protocols — Part 1: Standard test sequence for emissions and performance, safety and durability
CEI EN 61649 : 2010 WEIBULL ANALYSIS
ISO 3951:1989 Sampling procedures and charts for inspection by variables for percent nonconforming
17/30367211 DC : 0 BS EN 16480 - PUMPS - ROTODYNAMIC PUMPS - MINIMUM REQUIRED EFFICIENCY OF WATER PUMPS AND METHODS OF QUALIFICATION AND VERIFICATION
ISO 8573-6:2003 Compressed air — Part 6: Test methods for gaseous contaminant content
DIN EN 326-2 E : 2000 WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL
EN ISO 29461-1:2013 Air intake filter systems for rotary machinery - Test methods - Part 1: Static filter elements (ISO 29461-1:2013)
DIN EN ISO 11058:2010-08 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF WATER PERMEABILITY CHARACTERISTICS NORMAL TO THE PLANE, WITHOUT LOAD
BS EN ISO 29461-1:2013 Air intake filter systems for rotary machinery. Test methods Static filter elements
BS EN ISO 12958:2010 Geotextiles and geotextile-related products. Determination of water flow capacity in their plane
BS EN 12603:2002 Glass in building. Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data
BS EN 15167-2:2006 Ground granulated blast furnace slag for use in concrete, mortar and grout Conformity evaluation
CR 14245:2001 Guidelines for the application of EN 197-2 "Conformity Evaluation"
I.S. EN ISO 29461-1:2013 AIR INTAKE FILTER SYSTEMS FOR ROTARY MACHINERY - TEST METHODS - PART 1: STATIC FILTER ELEMENTS (ISO 29461-1:2013)
EN 13562:2000 Geotextiles and geotextile-related products - Determination of resistance to penetration by water (hydrostatic pressure test)
DIN EN 326-2:2000-10 WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL
DIN EN 799 E : 2003 BAR CODING - SYMBOLOGY SPECIFICATIONS "CODE 128"
EN 62058-11:2010 Electricity metering equipment (a.c.) - Acceptance inspection - Part 11: General acceptance inspection methods
EN 12838:2000 Installations and equipment for liquefied natural gas - Suitability testing of LNG sampling systems
DIN EN 1482-1:2007-04 Fertilizers and liming materials - Sampling and sample preparation - Part 1: Sampling
DIN EN 450-2:2005-05 Fly ash for concrete - Part 2: Conformity evaluation
DIN EN 779:2012-10 PARTICULATE AIR FILTERS FOR GENERAL VENTILATION - DETERMINATION OF THE FILTRATION PERFORMANCE
BS 2750-2(1993) : 1993 ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - DETERMINATION, VERIFICATION AND APPLICATION OF PRECISION DATA

AS/NZS IEC 61649:2020 Weibull analysis

View more information
£159.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.