ISO 3320:2013
Current
Current
The latest, up-to-date edition.
Fluid power systems and components — Cylinder bores and piston rod diameters and area ratios — Metric series
Available format(s)
Hardcopy , PDF
Language(s)
English, French
Published date
02-12-2013
£41.00
Excluding VAT
ISO 3320:2013 establishes a metric series of cylinder bore and piston rod diameters for hydraulic and pneumatic cylinders, and specifies for each pair of diameters a corresponding standard ratio between the useful areas.
It applies only to the dimensional criteria of products manufactured in conformity with ISO 3320:2013; it does not apply to their functional characteristics.
| Committee |
ISO/TC 131/SC 3
|
| DevelopmentNote |
Supersedes ANSI B93.52M (04/2005) Supersedes ISO/DIS 3320 & ISO 7181. (12/2013)
|
| DocumentType |
Standard
|
| Pages |
4
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| JIS B 8366-1:2018 | Identical |
| DIN ISO 3320:2016-01 | Identical |
| NF ISO 3320 : 2014 | Identical |
| BS ISO 3320:2013 | Identical |
| NEN ISO 3320 : 2013 | Identical |
| NFE 49 049 : 1992 | Similar to |
| DIN 24333:1979-06 | Corresponds |
| NS ISO 3320 : 1ED 1992 | Identical |
| NFE 48 052 : 1979 | Similar to |
| NBN E 48 002 : 1988 | Identical |
| UNE 101360:1986 | Identical |
| PN ISO 3320 : 1998 | Identical |
| BS ISO 8131:1992 | Hydraulic fluid power. Single rod cylinders, 16 MPa (160 bar) compact series. Tolerances |
| BS ISO 6981:1992 | Hydraulic fluid power. Cylinders. Rod end plain eyes. Mounting dimensions |
| BS ISO 8132:2014 | Hydraulic fluid power. Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series |
| 13/30286407 DC : 0 | BS ISO 10766 - HYDRAULIC FLUID POWER - CYLINDERS - HOUSING DIMENSIONS FOR RECTANGULAR-SECTION-CUT BEARING RINGS FOR PISTONS AND RODS |
| BS ISO 13726:2008 | Hydraulic fluid power. Single rod cylinders, 16 MPa (160 bar) compact series with bores from 250 mm to 500 mm. Accessory mounting dimensions |
| 09/30199986 DC : 0 | BS ISO 15524 - PNEUMATIC FLUID POWER - SINGLE ROD SHORT STROKE CYLINDERS |
| BS ISO 10762:2015 | Hydraulic fluid power. Mounting dimensions for cylinders, 10 MPa (100 bar) series |
| 04/30098195 DC : DRAFT JUL 2004 | ISO 6020-2 - HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) SERIES - PART 2: COMPACT SERIES |
| BS ISO 7425-1:1988 | Hydraulic fluid power. Housing for elastomer-energized, plastic-faced seals. Dimensions and tolerances Piston seal housings |
| 01/714184 DC : DRAFT OCT 2001 | ISO/DIS 15552 - PNEUMATIC FLUID POWER - CYLINDERS WITH DETACHABLE MOUNTINGS, 1000 KPA (10 BAR) SERIES, BORES FROM 32 MM TO 320 MM - BASIC, MOUNTING AND ACCESSORIES DIMENSIONS |
| ISO 13726:2008 | Hydraulic fluid power — Single rod cylinders, 16 MPa (160 bar) compact series with bores from 250 mm to 500 mm — Accessory mounting dimensions |
| BS 4742-3:1985 | Hydraulic equipment for agricultural machinery Specification for dimensions and pressure rating of single-acting telescopic tipping cylinders for trailers |
| BS ISO 6022:2006 | Hydraulic fluid power. Mounting dimensions for single rod cylinders, 25M Pa (250 bar) series |
| 06/30128831 DC : DRAFT MAR 2006 | ISO 6020-1 - HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) SERIES - PART 1: MEDIUM SERIES |
| ISO 6195:2013 | Fluid power systems and components — Cylinder-rod wiper-ring housings in reciprocating applications — Dimensions and tolerances |
| ISO 21287:2004 | Pneumatic fluid power — Cylinders — Compact cylinders, 1000 kPa (10 bar) series, bores from 20 mm to 100 mm |
| DIN ISO 4395:2011-05 | Fluid power systems and components - Cylinder piston rod end types and dimensions (ISO 4395:2009 + Cor. 1:2010) |
| DIN ISO 6022:2008-06 | HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR SINGLE ROD CYLINDERS, 25 MPA (250 BAR) SERIES |
| DIN ISO 21287:2005-12 | Pneumatic fluid power - Cylinders - Compact cylinders, 1000 kPa (10 bar) series, bores from 20 mm to 100 mm (ISO 21287:2004) |
| ISO 7425-1:1988 | Hydraulic fluid power — Housings for elastomer-energized, plastic-faced seals — Dimensions and tolerances — Part 1: Piston seal housings |
| BS ISO 6020-1:2007 | Hydraulic fluid power. Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series Medium series |
| 07/30173477 DC : 0 | BS ISO 4395 - FLUID POWER SYSTEMS AND COMPONENTS - CYLINDER PISTON ROD END TYPES AND DIMENSIONS |
| BS ISO 8136:1986 | Hydraulic fluid power. Single rod cylinders, 160 bar (16 MPa) medium series. Port dimensions |
| ISO 8136:1986 | Hydraulic fluid power — Single rod cylinders, 160 bar (16 MPa) medium series — Port dimensions |
| BS ISO 6020-2:2015 | Hydraulic fluid power. Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series Compact series |
| 04/104967 DC : DRAFT APR 2004 | ISO/DIS 10766 - HYDRAULIC FLUID POWER - CYLINDERS - HOUSING DIMENSIONS FOR RECTANGULAR-SECTION-CUT BEARING RINGS FOR PISTONS AND RODS |
| 06/30128838 DC : DRAFT MAR 2006 | ISO 13726 - HYDRAULIC FLUID POWER - SINGLE ROD CYLINDERS, 16 MPA (160 BAR) COMPACT SERIES WITH BORES FROM 250 MM TO 500 MM - ACCESSORY MOUNTING DIMENSIONS |
| 04/30116417 DC : DRAFT JUL 2004 | ISO 8133 - HYDRAULIC FLUID POWER - SINGLE ROD CYLINDERS, 16 MPA (160 BAR) COMPACT SERIES - ACCESSORY MOUNTING DIMENSIONS |
| BS ISO 8138:1998 | Hydraulic fluid power. Single rod cylinders, 16 MPA (160 bar) compact series. Port dimensions |
| BS ISO 6020-3:2015 | Hydraulic fluid power. Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series Compact series with bores from 250 mm to 500 mm |
| ANSI B93.111M : 87(R1994) | FLUID POWER SYSTEMS AND COMPONENTS - CYLINDERS - HOUSING FOR ROD WIPER RINGS IN RECIPROCATING APPLICATIONS - DIMENSIONS AND TOLERANCES, |
| ISO 8132:2014 | Hydraulic fluid power — Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series |
| ISO 10766:2014 | Hydraulic fluid power — Cylinders — Housing dimensions for rectangular-section-cut bearing rings for pistons and rods |
| ISO 8138:1998 | Hydraulic fluid power — Single rod cylinders, 16 MPa (160 bar) compact series — Port dimensions |
| I.S. EN 13445-6:2014 | UNFIRED PRESSURE VESSELS - PART 6: REQUIREMENTS FOR THE DESIGN AND FABRICATION OF PRESSURE VESSELS AND PRESSURE PARTS CONSTRUCTED FROM SPHEROIDAL GRAPHITE CAST IRON |
| BS ISO 8133:2014 | Hydraulic fluid power. Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) compact series |
| ANSI B93.107M : 1987 | |
| 98/715115 DC : DRAFT SEP 1998 | ISO/CD 6982 - HYDRAULIC FLUID POWER - CYLINDERS - ROD END SPHERICAL EYES - MOUNTING DIMENSIONS |
| 98/706002 DC : DRAFT APR 1998 | ISO/CD 3601-5 - FLUID SYSTEMS - SEALING DEVICES - O-RINGS - PART 5: ANTI-EXTRUSIONS DEVICES (BACK-UP RINGS) |
| 13/30274177 DC : 0 | BS ISO 10762 - HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR CYLINDERS, 10 MPA (100 BAR) SERIES |
| BS ISO 7425-2:1989 | Hydraulic fluid power. Housing for elastomer-energized, plastic-faced seals. Dimensions and tolerances Rod seal housings |
| BS ISO 16656:2004 | Hydraulic fluid power. Single rod, short-stroke cylinders with bores from 32 mm to 100 mm for use at 10 MPa (100 bar). Mounting dimensions |
| BS ISO 8137:1986 | Hydraulic fluid power. Single rod cylinders, 250 bar (25 MPa) series. Port dimensions |
| ISO 6022:2006 | Hydraulic fluid power — Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series |
| BS ISO 6982:1992 | Hydraulic fluid power. Cylinders. Rod end spherical eyes. Mounting dimensions |
| 14/30291030 DC : 0 | BS ISO 6432 - PNEUMATIC FLUID POWER - SINGLE ROD CYLINDERS, 1000 KPA (10 BAR) SERIES, BORES FROM 8 TO 25 MM - BASIC AND MOUNTING DIMENSIONS |
| BS ISO 15524:2011 | Pneumatic fluid power. Cylinders. Single-rod short-stroke cylinders, 1000 kPa (10 bar) series, bores from 20 mm to 100 mm |
| DIN ISO 6195:2015-02 (Draft) | FLUID POWER SYSTEMS AND COMPONENTS - CYLINDER-ROD WIPER-RING HOUSINGS IN RECIPROCATING APPLICATIONS - DIMENSIONS AND TOLERANCES |
| ISO 15524:2011 | Pneumatic fluid power — Cylinders — Single-rod short-stroke cylinders, 1 000 kPa (10 bar) series, bores from 20 mm to 100 mm |
| ANSI B93.103M : 1987 | HYDRAULIC FLUID POWER - SINGLE ROD CYLINDERS, 160 BAR (16 MPA) COMPACT SERIES - TOLERANCES, |
| ISO 6020-1:2007 | Hydraulic fluid power — Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series — Part 1: Medium series |
| ISO 5597:2010 | Hydraulic fluid power — Cylinders — Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications |
| ISO 6020-3:2015 | Hydraulic fluid power — Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series — Part 3: Compact series with bores from 250 mm to 500 mm |
| ISO 15552:2018 | Pneumatic fluid power — Cylinders with detachable mountings, 1 000 kPa (10 bar) series, bores from 32 mm to 320 mm — Basic, mounting and accessories dimensions |
| ISO 6432:2015 | Pneumatic fluid power — Single rod cylinders, 1 000 kPa (10 bar) series, bores from 8 mm to 25 mm — Basic and mounting dimensions |
| ISO 16656:2016 | Hydraulic fluid power — Single rod, short-stroke cylinders with bores from 32 mm to 100 mm for use at 10 MPa (100 bar) — Mounting dimensions |
| ISO 6020-2:2015 | Hydraulic fluid power — Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series — Part 2: Compact series |
| ISO 4395:2009 | Fluid power systems and components — Cylinder piston rod end types and dimensions |
| 13/30274171 DC : 0 | BS ISO 8132 - HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR ACCESSORIES FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) MEDIUM AND 25 MPA (250 BAR) SERIES |
| 14/30274168 DC : 0 | BS ISO 6020-3 - HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) SERIES - PART 3: COMPACT SERIES WITH BORES FROM 250 MM TO 500 MM |
| BS ISO 5597:2010 | Hydraulic fluid power. Cylinders. Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications |
| BS ISO 21287:2004 | Pneumatic fluid power. Cylinders. Compact cylinders, 1000 kPa (10 bar) series, bores from 20 mm to 100 mm |
| BS ISO 4395:2009 | Fluid power systems and components. Cylinder piston rod end types and dimensions |
| ISO 8133:2014 | Hydraulic fluid power — Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) compact series |
| BS ISO 10766:2014 | Hydraulic fluid power. Cylinders. Housing dimensions for rectangular-section-cut bearing rings for pistons and rods |
| BS ISO 6432:2015 | Pneumatic fluid power. Single rod cylinders, 1 000 kPa (10 bar) series, bores from 8 mm to 25 mm. Basic and mounting dimensions |
| 98/715116 DC : DRAFT SEP 1998 | ISO/CD 6981 - HYDRAULIC FLUID POWER - CYLINDERS - ROD END PLAIN EYES - MOUNTING DIMENSIONS |
| BS 5751:1979 | Specification for dimensions of housings for hydraulic seals for reciprocating applications |
| BS ISO 8135:1999 | Hydraulic fluid power. Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series. Tolerances |
| BS ISO 7180:1986 | Pneumatic fluid power. Cylinders. Bore and port thread sizes |
| BS ISO 7181:1991 | Hydraulic fluid power. Cylinders. Bore and rod area ratios |
| DIN ISO 6020-1:2010-07 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Part 1: Medium series (ISO 6020-1:2007) |
| BS ISO 6195:2013 | Fluid power systems and components. Cylinder-rod wiper-ring housings in reciprocating applications. Dimensions and tolerances |
| ISO 7425-2:1989 | Hydraulic fluid power — Housings for elastomer-energized, plastic-faced seals — Dimensions and tolerances — Part 2: Rod seal housings |
| ISO 6981:1992 | Hydraulic fluid power — Cylinders — Rod end plain eyes — Mounting dimensions |
| ANSI B93.106M : 1987 | HYDRAULIC FLUID POWER - SINGLE ROD CYLINDERS, 160 BAR (16 MPA) MEDIUM SERIES - PORT DIMENSIONS, |
| ISO 6547:1981 | Hydraulic fluid power — Cylinders — Piston seal housings incorporating bearing rings — Dimensions and tolerances |
| ISO 10099:2001 | Pneumatic fluid power — Cylinders — Final examination and acceptance criteria |
| BS ISO 10099:2001 | Pneumatic fluid power. Cylinders. Final examination and acceptance criteria |
| 04/30098199 DC : DRAFT JUL 2004 | ISO 6022 - HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR SINGLE ROD CYLINDERS, 25 MPA (250 BAR) SERIES |
| ISO 10762:2015 | Hydraulic fluid power — Mounting dimensions for cylinders, 10 MPa (100 bar) series |
| ANSI B93.108M : 1987 | HYDRAULIC FLUID POWER - SINGLE ROD CYLINDERS, 160 BAR (16 MPA) COMPACT SERIES - PORT DIMENSIONS, |
| 14/30284271 DC : 0 | BS ISO 6020-2 - HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) SERIES - PART 2: COMPACT SERIES |
| 99/704445 DC : DRAFT FEB 1999 | ISO/CD 15552-1 - PNEUMATIC FLUID POWER - CYLINDERS WITH DETACHABLE MOUNTINGS, 1 000 KPA (10 BAR) SERIES, BORES FROM 32 MM TO 320 MM - PART 1: BASIC AND MOUNTING DIMENSIONS |
| 13/30274174 DC : 0 | BS ISO 8133 - HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR ACCESSORIES FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) COMPACT SERIES |
| BS ISO 6547:1981 | Hydraulic fluid power. Cylinders. Piston seal housings incorporating bearing rings. Dimensions and tolerances |
| 04/30098205 DC : DRAFT JUL 2004 | ISO 8132 - HYDRAULIC FLUID POWER - SINGLE ROD CYLINDERS, (16 MPA) 160 BAR MEDIUM AND 25 MPA (250 BAR) SERIES - MOUNTING DIMENSIONS FOR ACCESSORIES |
| BS ISO 15552:2004 | Pneumatic fluid power. Cylinders with detachable mountings, 1 000 kPa 10 bar series, bores from 32 mm to 320 mm. Basic, mounting and accessories dimensions |
| 08/30174605 DC : DRAFT SEP 2008 | BS ISO 5597 - HYDRAULIC FLUID POWER - CYLINDERS - HOUSINGS FOR SINGLE-ACTING PISTON AND ROD SEALS IN RECIPROCATING APPLICATIONS - DIMENSIONS AND TOLERANCES |
| ANSI B93.91M : 1987 | HYDRAULIC FLUID POWER - CYLINDERS - ROD END SPHERICAL EYES - MOUNTING DIMENSIONS, |
| ISO 6982:1992 | Hydraulic fluid power — Cylinders — Rod end spherical eyes — Mounting dimensions |
| ISO 8137:1986 | Hydraulic fluid power — Single rod cylinders, 250 bar (25 MPa) series — Port dimensions |
| ISO 5598:2008 | Fluid power systems and components — Vocabulary |
| ISO 3:1973 | Preferred numbers — Series of preferred numbers |
| ISO 6099:2009 | Fluid power systems and components — Cylinders — Identification code for mounting dimensions and mounting types |
Summarise
£41.00
Excluding VAT
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.