ISO 3574:2012
Current
Current
The latest, up-to-date edition.
Cold-reduced carbon steel sheet of commercial and drawing qualities
Available format(s)
Hardcopy , PDF
Language(s)
English, Russian
Published date
10-12-2012
£62.00
Excluding VAT
ISO 3074:2012 applies to cold-reduced carbon steel sheet of commercial and drawing qualities. It is suitable for applications where the surface is of prime importance.
| Committee |
ISO/TC 17/SC 12
|
| DevelopmentNote |
Supersedes ISO/DIS 3574. (12/2012)
|
| DocumentType |
Standard
|
| Pages |
10
|
| ProductNote |
THIS STANDARD ALSO REFERS TO JIS G 3141.
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NEN ISO 3574 : 2013 | Identical |
| NFA 36 401 : 1983 | Similar to |
| BS 1449-1:1983 | Similar to |
| DIN 1623-1:1983-02 | Similar to |
| 15/30284318 DC : 0 | BS EN ISO 9227 - CORROSION TESTS IN ARTIFICIAL ATMOSPHERES - SALT SPRAY TESTS |
| BS ISO 15750-2:2002 | Packaging. Steel drums Non-removable head (tight head) drums with a minimum total capacity of 121 l, 216,5 l and 230 l |
| 12/30258891 DC : 0 | BS ISO 5002 - HOT-ROLLED AND COLD-REDUCED ELECTROLYTIC ZINC-COATED CARBON STEEL SHEET OF COMMERCIAL AND DRAWING QUALITIES |
| 07/30144587 DC : 0 | BS ISO 6932 - COLD-REDUCED CARBON STEEL STRIP WITH A MAXIMUM CARBON CONTENT OF 0,25% |
| BS ISO 15750-1 : 2002 | PACKAGING - STEEL DRUMS - PART 1: REMOVABLE HEAD (OPEN HEAD) DRUMS WITH A MINIMUM TOTAL CAPACITY OF 208 L, 210 L AND 216,5 L |
| 12/30237859 DC : 0 | BS ISO 16539 - CORROSION OF METALS AND ALLOYS - ACCELERATED CYCLIC CORROSION TESTS WITH EXPOSURE TO SYNTHETIC OCEAN WATER SALT-DEPOSITION PROCESS -"DRY" AND "WET" CONDITIONS AT CONSTANT ABSOLUTE HUMIDITY |
| BS ISO 16432 : 2006 AMD 17294 | RESISTANCE WELDING - PROCEDURE FOR PROJECTION WELDING OF UNCOATED AND COATED LOW CARBON STEELS USING EMBOSSED PROJECTION(S) |
| BS ISO 15750-3 : 2002 | PACKAGING - STEEL DRUMS - PART 3: INSERTED FLANGE-TYPE CLOSURE SYSTEMS |
| 14/30287983 DC : 0 | BS ISO 4997 - COLD-REDUCED CARBON STEEL SHEET OF STRUCTURAL QUALITY |
| 16/30334455 DC : 0 | BS EN ISO 9455-13 - SOFT SOLDERING FLUXES - TEST METHODS - PART 13: DETERMINATION OF FLUX SPATTERING |
| INCITS/ISO/IEC 22050 : 2002 | INFORMATION TECHNOLOGY - DATA INTERCHANGE ON 12,7 MM, 384-TRACK MAGNETIC TAPE CARTRIDGES - ULTRIUM-1 FORMAT |
| ISO 16539:2013 | Corrosion of metals and alloys — Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process — "Dry" and "wet" conditions at constant absolute humidity |
| ISO 4948-2:1981 | Steels — Classification — Part 2: Classification of unalloyed and alloy steels according to main quality classes and main property or application characteristics |
| EN ISO 9455-13:2017 | Soft soldering fluxes - Test methods - Part 13: Determination of flux spattering (ISO 9455-13:2017) |
| BS EN 2328:2006 | Aerospace series. Washers, tab in corrosion resisting steel, cadmium plated for flight control rods. Dimensions |
| I.S. EN ISO 14373:2015 | RESISTANCE WELDING - PROCEDURE FOR SPOT WELDING OF UNCOATED AND COATED LOW CARBON STEELS (ISO 14373:2015) |
| DIN EN ISO 15750-1:2008-09 | Packaging - Steel drums - Part 1: Removable head (open head) drums with a minimum total capacity of 208 l, 210 l and 216,5 l (ISO 15750-1:2002) |
| DIN EN ISO 15750-2:2008-09 | Packaging - Steel drums - Part 2: Non-removable head (tight head) drums with a minimum total capacity of 212 l, 216,5 l and 230 l (ISO 15750-2:2002) |
| EN 12928:2000 | Inserted flange type closure systems for steel drums with a total capacity of 17 l to 230 l |
| EN 61284:1997 | Overhead lines - Requirements and tests for fittings |
| 12/30249839 DC : 0 | BS EN ISO 9227 - CORROSION TESTS IN ARTIFICIAL ATMOSPHERES - SALT SPRAY TESTS |
| 14/30274816 DC : 0 | BS EN ISO 16089 - MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES |
| 17/30334106 DC : 0 | BS ISO 13887 - STEEL SHEET, COLD-REDUCED, OF HIGHER YIELD STRENGTH WITH IMPROVED FORMABILITY |
| PREN ISO 16701 : DRAFT 2011 | CORROSION OF METALS AND ALLOYS - CORROSION IN ARTIFICIAL ATMOSPHERE - ACCELERATED CORROSION TEST INVOLVING EXPOSURE UNDER CONTROLLED CONDITIONS OF HUMIDITY CYCLING AND INTERMITTENT SPRAYING OF A SALT SOLUTION (ISO/DIS 16701:2011) |
| I.S. EN ISO 11844-2:2008 | CORROSION OF METALS AND ALLOYS - CLASSIFICATION OF LOW CORROSIVITY OF INDOOR ATMOSPHERES - PART 2: DETERMINATION OF CORROSION ATTACK IN INDOOR ATMOSPHERES |
| 00/714723 DC : DRAFT OCT 2000 | ISO/DIS 14373 - WELDING - RESISTANCE SPOT WELDS - PROCEDURE FOR SPOT WELDING OF UNCOATED AND COATED LOW CARBON AND HIGH STRENGTH STEELS |
| CEI EN 61284 : 1999 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR FITTINGS |
| BS ISO 13887:2017 | Steel sheet, cold-reduced, of higher yield strength with improved formability |
| ISO 630:1995 | Structural steels — Plates, wide flats, bars, sections and profiles |
| ISO 21182:2013 | Light conveyor belts — Determination of the coefficient of friction |
| BS EN 13218 : 2002 | MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES |
| DIN EN 13218:2010-09 | MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES |
| I.S. EN ISO 21182:2013 | LIGHT CONVEYOR BELTS - DETERMINATION OF THE COEFFICIENT OF FRICTION (ISO 21182:2013) |
| DIN EN 13218:2002-09 | MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES |
| I.S. EN ISO 9227:2017 | CORROSION TESTS IN ARTIFICIAL ATMOSPHERES - SALT SPRAY TESTS (ISO 9227:2017) |
| BS 7569:1994 | Recommendations for the packaging of dangerous goods for transport |
| BS 3900-A3(2004) : 2004 | PAINTS AND VARNISHES - STANDARD PANELS FOR TESTING |
| BS 3900-F12(1997) : 1997 AMD 13288 | METHODS OF TEST FOR PAINTS - DETERMINATION OF RESISTANCE TO NEUTRAL SALT SPRAY (FOG) |
| BS 3900-A3:1986 | Methods of test for paints Standard panels for paint testing |
| NF EN ISO 15750-3 : 2008 | PACKAGING - STEEL DRUMS - PART 3: INSERTED FLANGE-TYPE CLOSURE SYSTEMS |
| BS EN ISO 9455-13:2017 | Soft soldering fluxes. Test methods Determination of flux spattering |
| BS EN 605:1992 | Paints and varnishes. Standard panels for testing |
| BS ISO 4997:2015 | Cold-reduced carbon steel sheet of structural quality |
| BS EN ISO 15750-1:2008 | Packaging. Steel drums Removable head (open head) drums with a minimum total capacity of 208 l, 210 l and 216,5 l |
| BS ISO 11844-2 : 2005 | CORROSION OF METALS AND ALLOYS - CLASSIFICATION OF LOW CORROSIVITY OF INDOOR ATMOSPHERES - PART 2: DETERMINATION OF CORROSION ATTACK IN INDOOR ATMOSPHERES |
| 13/30280530 DC : 0 | BS ISO 5954 - COLD-REDUCED CARBON STEEL SHEET ACCORDING TO HARDNESS REQUIREMENTS |
| BS ISO 16701 : 2003 | CORROSION OF METALS AND ALLOYS - CORROSION IN ARTIFICIAL ATMOSPHERE - ACCELERATED CORROSION TEST INVOLVING EXPOSURE UNDER CONTROLLED CONDITIONS OF HUMIDITY CYCLING AND INTERMITTENT SPRAYING OF A SALT SOLUTION |
| NF EN ISO 15750-2 : 2008 | PACKAGING - STEEL DRUMS - PART 2: NON-REMOVABLE HEAD (TIGHT HEAD) DRUMS WITH A MINIMUM TOTAL CAPACITY OF 212 L, 216,5 L AND 230 L |
| EN ISO 16151:2008 | Corrosion of metals and alloys - Accelerated cyclic tests with exposure to acidified salt spray, 'dry' and 'wet' conditions (ISO 16151:2005) |
| BS EN ISO 16089:2015 | Machine tools. Safety. Stationary grinding machines |
| ISO 16089:2015 | Machine tools — Safety — Stationary grinding machines |
| I.S. EN ISO 16701:2015 | CORROSION OF METALS AND ALLOYS - CORROSION IN ARTIFICIAL ATMOSPHERE - ACCELERATED CORROSION TEST INVOLVING EXPOSURE UNDER CONTROLLED CONDITIONS OF HUMIDITY CYCLING AND INTERMITTENT SPRAYING OF A SALT SOLUTION (ISO 16701:2015) |
| I.S. EN ISO 15750-3:2008 | PACKAGING - STEEL DRUMS - PART 3: INSERTED FLANGE-TYPE CLOSURE SYSTEMS |
| I.S. EN ISO 15750-1:2008 | PACKAGING - STEEL DRUMS - PART 1: REMOVABLE HEAD (OPEN HEAD) DRUMS WITH A MINIMUM TOTAL CAPACITY OF 208 L, 210 L AND 216,5 L |
| ISO 5002:2013 | Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities |
| ISO 4997:2015 | Cold-reduced carbon steel sheet of structural quality |
| I.S. EN ISO 16151:2008 | CORROSION OF METALS AND ALLOYS - ACCELERATED CYCLIC TESTS WITH EXPOSURE TO ACIDIFIED SALT SPRAY, 'DRY' AND 'WET' CONDITIONS |
| ISO 5954:2014 | Cold-reduced carbon steel sheet according to hardness requirements |
| EN ISO 9227:2017 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
| DIN EN ISO 14373:2015-06 | Resistance welding - Procedure for spot welding of uncoated and coated low carbon steels (ISO 14373:2015) |
| ISO 16701:2015 | Corrosion of metals and alloys — Corrosion in artificial atmosphere — Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution |
| ISO 15750-2:2002 | Packaging — Steel drums — Part 2: Non-removable head (tight head) drums with a minimum total capacity of 212 l, 216,5 l and 230 l |
| DIN EN ISO 7253:2002-04 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO NEUTRAL SALT SPRAY (FOG) |
| EN 61029-2-4:2011 | Safety of transportable motor-operated electric tools - Part 2-4: Particular requirements for bench grinders |
| EN ISO 11844-2:2008 | Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 2: Determination of corrosion attack in indoor atmospheres (ISO 11844-2:2005) |
| EN ISO 16432:2007 | Resistance welding - Procedure for projection welding of uncoated and coated low carbon steels using embossed projection(s) (ISO 16432:2006) |
| EN ISO 15750-3:2008 | Packaging - Steel drums - Part 3: Inserted flange-type closure systems (ISO 15750-3:2002) |
| DIN EN ISO 16151:2008-07 | CORROSION OF METALS AND ALLOYS - ACCELERATED CYCLIC TESTS WITH EXPOSURE TO ACIFIED SALT SPRAY, 'DRY' AND 'WET' CONDITIONS |
| 01/713017 DC : DRAFT SEP 2001 | ISO/CD 9227 - CORROSION TESTS IN ARTIFICIAL ATMOSPHERES - SALT SPRAY TESTS (REVISED) |
| BS ISO 16539:2013 | Corrosion of metals and alloys. Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process. \'Dry\' and \'wet\' conditions at constant absolute humidity |
| 11/30231401 DC : 0 | BS EN ISO 16701 - CORROSION OF METALS AND ALLOYS - CORROSION IN ARTIFICIAL ATMOSPHERE - ACCELERATED CORROSION TEST INVOLVING EXPOSURE UNDER CONTROLLED CONDITIONS OF HUMIDITY CYCLING AND INTERMITTENT SPRAYING OF A SALT SOLUTION |
| DIN EN ISO 11844-2:2008-08 | CORROSION OF METALS AND ALLOYS - CLASSIFICATION OF LOW CORROSIVITY OF INDOOR ATMOSPHERES - PART 2: DETERMINATION OF CORROSION ATTACK IN INDOOR ATMOSPHERES |
| ISO/IEC 22050:2002 | Information technology — Data interchange on 12,7 mm, 384-track magnetic tape cartridges — Ultrium-1 format |
| BS ISO 16151 : 2005 | CORROSION OF METALS AND ALLOYS - ACCELERATED CYCLIC TESTS WITH EXPOSURE TO ACIDIFIED SALT SPRAY, "DRY" AND "WET" CONDITIONS |
| PREN 2328 : 200P1 | AEROSPACE SERIES - WASHERS, TAB IN CORROSION RESISTING STEEL CADMIUM PLATED FOR FLIGHT CONTROL RODS - DIMENSIONS |
| BS ISO 16433 : 2006 AMD 17291 | RESISTANCE WELDING - PROCEDURE FOR SEAM WELDING OF UNCOATED AND COATED LOW CARBON STEELS |
| BS EN ISO 16151:2008 | Corrosion of metals and alloys. Accelerated cyclic tests with exposure to acidified salt spray, \'dry\' and \'wet\' conditions |
| I.S. EN ISO 9455-13:2017 | SOFT SOLDERING FLUXES - TEST METHODS - PART 13: DETERMINATION OF FLUX SPATTERING (ISO 9455-13:2017) |
| ISO 13887:2017 | Steel sheet, cold-reduced, of higher yield strength with improved formability |
| I.S. EN ISO 15750-2:2008 | PACKAGING - STEEL DRUMS - PART 2: NON-REMOVABLE HEAD (TIGHT HEAD) DRUMS WITH A MINIMUM TOTAL CAPACITY OF 212 L, 216,5 L AND 230 L |
| ISO 6932:2014 | Cold-reduced carbon steel strip with a maximum carbon content of 0,25 % |
| DIN EN ISO 16432:2007-09 | Resistance welding - Procedure for projection welding of uncoated and coated low carbon steels using embossed projection(s) (ISO 16432:2006) |
| DIN EN ISO 16433:2007-09 | Resistance welding - Procedure for seam welding of uncoated and coated low carbon steels (ISO 16433:2006) |
| ISO 16432:2006 | Resistance welding — Procedure for projection welding of uncoated and coated low carbon steels using embossed projection(s) |
| BS EN ISO 16432:2007 | Resistance welding. Procedure for projection welding of uncoated and coated low carbon steels using embossed projection(s) |
| DIN EN ISO 21182:2013-09 | Light conveyor belts - Determination of the coefficient of friction (ISO 21182:2013) |
| BS EN ISO 7253:2001 | Paints and varnishes. Determination of resistance to neutral salt spray (fog) |
| ISO 14373:2015 | Resistance welding — Procedure for spot welding of uncoated and coated low carbon steels |
| ISO 16433:2006 | Resistance welding — Procedure for seam welding of uncoated and coated low carbon steels |
| BS EN ISO 9227:2017 | Corrosion tests in artificial atmospheres. Salt spray tests |
| ISO 11844-2:2005 | Corrosion of metals and alloys — Classification of low corrosivity of indoor atmospheres — Part 2: Determination of corrosion attack in indoor atmospheres |
| ISO 15750-3:2002 | Packaging — Steel drums — Part 3: Inserted flange-type closure systems |
| DIN EN ISO 15750-3:2008-09 | Packaging - Steel drums - Part 3: Inserted flange-type closure systems (ISO 15750-3:2002) |
| EN ISO 15750-1:2008 | Packaging - Steel drums - Part 1: Removable head (open head) drums with a minimum total capacity of 208 l, 210 l and 216,5 l (ISO 15750-1:2002) |
| EN 2328:2006 | Aerospace series - Washers, tab in corrosion resisting steel, cadmium plated for flight control rods - Dimensions |
| EN 605 : 1992 | PAINTS AND VARNISHES - STANDARD PANELS FOR TESTING |
| EN ISO 21182:2013 | Light conveyor belts - Determination of the coefficient of friction (ISO 21182:2013) |
| EN ISO 14373:2015 | Resistance welding - Procedure for spot welding of uncoated and coated low carbon steels (ISO 14373:2015) |
| EN ISO 16089:2015 | Machine tools - Safety - Stationary grinding machines (ISO 16089:2015) |
| EN ISO 7253 : 2001 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO NEUTRAL SALT SPRAY (FOG) |
| EN ISO 16433:2007 | Resistance welding - Procedure for seam welding of uncoated and coated low carbon steels (ISO 16433:2006) |
| EN ISO 16701:2015 | Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution (ISO 16701:2015, Corrected version 2018-10) |
| EN ISO 15750-2:2008 | Packaging - Steel drums - Part 2: Non-removable head (tight head) drums with a minimum total capacity of 212 l, 216,5 l and 230 l (ISO 15750-2:2002) |
| ECMA 319 : 1ED 2001 | DATA INTERCHANGE ON 12,7 MM - 384-TRACK MAGNETIC TAPE CARTRIDGES - ULTRIUM-1 FORMAT |
| BS EN 61284:1998 | Overhead lines. Requirements and tests for fittings |
| 17/30350881 DC : DRAFT SEP 2017 | BS ISO 14993 - CORROSION OF METALS AND ALLOYS - ACCELERATED TESTING INVOLVING CYCLIC EXPOSURE TO SALT MIST, DRY AND WET CONDITIONS |
| BS EN ISO 15750-2:2008 | Packaging. Steel drums Non-removable head (tight head) drums with a minimum total capacity of 212 l, 216,5 l and 230 l |
| 09/30196126 DC : 0 | BS ISO 11118 - GAS CYLINDERS - NON-REFILLABLE METALLIC GAS CYLINDERS - SPECIFICATION AND TEST METHODS |
| ISO 9455-13:2017 | Soft soldering fluxes — Test methods — Part 13: Determination of flux spattering |
| 13/30280533 DC : 0 | BS ISO 6932 - COLD-REDUCED CARBON STEEL STRIP WITH A MAXIMUM CARBON CONTENT OF 0,25% |
| BS EN ISO 15750-3:2008 | Packaging. Steel drums Inserted flange-type closure systems |
| DIN EN ISO 16701:2015-10 | Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution (ISO 16701:2015) |
| BS EN ISO 16701:2015 | Corrosion of metals and alloys. Corrosion in artificial atmosphere. Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution |
| BS EN ISO 11844-2:2008 | Corrosion of metals and alloys. Classification of low corrosivity of indoor atmospheres Determination of corrosion attack in indoor atmospheres |
| BS ISO 5954:2007 | Cold-reduced carbon steel sheet according to hardness requirements |
| 13/30266458 DC : 0 | BS EN ISO 14373 - RESISTANCE WELDING - PROCEDURE FOR SPOT WELDING OF UNCOATED AND COATED LOW CARBON STEELS |
| BS ISO 6932:2014 | Cold-reduced carbon steel strip with a maximum carbon content of 0,25 % |
| BS EN 61029-2-4:2011 | Safety of transportable motor-operated electric tools Particular requirements for bench grinders |
| CAN/CSA-ISO/IEC 22050-04 (R2012) | Information Technology - Data Interchange on 12,7 mm, 384-Track Magnetic Tape Cartridges - Ultrium-1 Format (Adopted ISO/IEC 22050:2002, first edition, 2002-10-01) |
| BS 7479:1991 | Method for salt spray corrosion tests in artificial atmospheres |
| ISO 16151:2005 | Corrosion of metals and alloys — Accelerated cyclic tests with exposure to acidified salt spray, "dry" and "wet" conditions |
| NF EN ISO 15750-1 : 2008 | PACKAGING - STEEL DRUMS - PART 1: REMOVABLE HEAD (OPEN HEAD) DRUMS WITH A MINIMUM TOTAL CAPACITY OF 208 L, 210 L AND 216,5 L |
| ISO 1052:1982 | Steels for general engineering purposes |
| DIN EN ISO 16089:2016-06 | Machine tools - Safety - Stationary grinding machines (ISO 16089:2015) |
| I.S. EN ISO 16089:2015 | MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES (ISO/DIS 16089:2014) |
| ISO 7253:1996 | Paints and varnishes — Determination of resistance to neutral salt spray (fog) |
| BS EN ISO 16433:2007 | Resistance welding. Procedure for seam welding of uncoated and coated low carbon steels |
| BS EN ISO 21182:2013 | Light conveyor belts. Determination of the coefficient of friction |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| BS EN 12928:2000 | Inserted flange type closure systems for steel drums with a total capacity of 17 l to 230 l |
| BS EN ISO 14373:2015 | Resistance welding. Procedure for spot welding of uncoated and coated low carbon steels |
| NS-EN ISO 16701:2025 | Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution (ISO 16701:2025) |
| I.S. EN 13218:2002 | MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES |
| UNE-EN 61029-2-4:2011 | Safety of transportable motor-operated electric tools - Part 2-4: Particular requirements for bench grinders |
| UNE-EN ISO 16701:2015 | Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution (ISO 16701:2015, Corrected version 2018-10) |
| UNE-EN ISO 9455-13:2018 | Soft soldering fluxes - Test methods - Part 13: Determination of flux spattering (ISO 9455-13:2017) |
| UNE-EN ISO 9227:2017 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
| ASME B32.100 : 2016 | PREFERRED METRIC SIZES FOR FLAT, ROUND, SQUARE, RECTANGULAR AND HEXAGONAL METAL PRODUCTS |
| ISO 10275:2007 | Metallic materials — Sheet and strip — Determination of tensile strain hardening exponent |
| ISO 16162:2012 | Cold-rolled steel sheet products — Dimensional and shape tolerances |
| ASTM A 1008/A1008M : 2016-09 | SPECIFICATION FOR STEEL, SHEET, COLD-ROLLED, CARBON, STRUCTURAL, HIGH-STRENGTH LOW-ALLOY, HIGH-STRENGTH LOW-ALLOY WITH IMPROVED FORMABILITY, SOLUTION HARDENED, AND BAKE HARDENABLE |
| ISO 6892-1:2016 | Metallic materials — Tensile testing — Part 1: Method of test at room temperature |
| EN 10130:2006 | Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions |
| ISO 10113:2006 | Metallic materials — Sheet and strip — Determination of plastic strain ratio |
Summarise
£62.00
Excluding VAT
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.