ISO 376:2011
Current
Current
The latest, up-to-date edition.
Metallic materials — Calibration of force-proving instruments used for the verification of uniaxial testing machines
Available format(s)
Hardcopy , PDF
Language(s)
French, English
Published date
07-06-2011
£148.00
Excluding VAT
ISO 376:2011 specifies a method for the calibration of force-proving instruments used for the static verification of uniaxial testing machines (e.g. tension/compression testing machines) and describes a procedure for the classification of these instruments.
It is applicable to force-proving instruments in which the force is determined by measuring the elastic deformation of a loaded member or a quantity which is proportional to it.
| Committee |
ISO/TC 164/SC 1
|
| DevelopmentNote |
Supersedes ISO/DIS 376. (06/2011) Supersedes RM.AERO 80312 & RM.AERO 80313. (05/2015)
|
| DocumentType |
Standard
|
| Pages |
30
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| DIN EN ISO 376:2011-09 | Identical |
| NF EN ISO 376 : 2011 | Identical |
| NBN EN ISO 376 : 2011 | Identical |
| NEN EN ISO 376 : 2011 | Identical |
| NS EN ISO 376 : 2011 | Identical |
| I.S. EN ISO 376:2011 | Identical |
| PN EN ISO 376 : 2011 | Identical |
| BIS IS 4169 : 2014 | Identical |
| EN ISO 376:2011 | Identical |
| BS EN ISO 376:2011 | Equivalent |
| DIN 51301:1986-02 | Similar to |
| BS EN ISO 376:2011 | Identical |
| BS 1610-2:1985 | Similar to |
| UNE-EN ISO 376:2011 | Identical |
| DIN EN ISO 6506-2:2016-04 (Draft) | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6506-2:2014) |
| BS EN 61788-6:2011 | Superconductivity Mechanical properties measurement. Room temperature tensile test of Cu/Nb-Ti composite superconductors |
| 04/30098257 DC : DRAFT MAY 2004 | EN ISO 6507-3 - METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
| BIS IS 6885-2 : 2011 | METALLIC MATERIALS - KNOOP HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
| 04/30074924 DC : DRAFT JUNE 2004 | EN ISO 6508-3 - METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 3: CALIBRATION AND REFERENCE BLOCKS (SCALES A, B, C, D, E, F, G, H, K, N, T) |
| ISO 17340:2014 | Metallic materials — Ductility testing — High speed compression test for porous and cellular metals |
| ISO 6506-2:2017 | Metallic materials — Brinell hardness test — Part 2: Verification and calibration of testing machines |
| BS EN 1090-5:2017 | Execution of steel structures and aluminium structures Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications |
| BIS IS 1500-2 : 2013 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
| 12/30248590 DC : 0 | BS ISO 14577-3 - METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 3: CALIBRATION OF REFERENCE BLOCKS |
| 04/30074927 DC : DRAFT JUN 2004 | EN ISO 6508-2 - METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (SCALES A, B, C, D, E, F, G, H, K, N, T) |
| BS ISO 17746:2016 | Steel wire rope net panels and rolls. Definitions and specifications |
| BS PD ISO/TS 17242 : 2014 | QUASI-STATIC CALIBRATION PROCEDURE FOR BELT FORCE TRANSDUCERS |
| 04/30074898 DC : DRAFT MAY 2004 | EN ISO 4545-3 - METALLIC MATERIALS - KNOOP HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
| OIML R 65 : 2006 | FORCE MEASURING SYSTEM OF UNIAXIAL MATERIAL TESTING MACHINES |
| BS ISO 17340:2014 | Metallic materials. Ductility testing. High speed compression test for porous and cellular metals |
| 04/30095196 DC : DRAFT MAY 2004 | EN ISO 6506-2 - METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
| ASTM E 2546 : 2015 : REDLINE | Standard Practice for Instrumented Indentation Testing |
| DIN EN ISO 6508-2:2015-06 | Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2015); German version EN ISO 6508-2:2015 |
| DIN EN ISO 14577-3:2015-11 | METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 3: CALIBRATION OF REFERENCE BLOCKS (ISO 14577-3:2015) |
| DIN EN ISO 6508-3:2015-06 | Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO 6508-3:2015) |
| BS EN ISO 14577-2:2015 | Metallic materials. Instrumented indentation test for hardness and materials parameters Verification and calibration of testing machines |
| BS EN ISO 7500-2:2006 | Metallic materials. Verification of static uniaxial testing machines Tension creep testing machines. Verification of the applied force |
| I.S. EN ISO 14577-2:2015 | METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 14577-2:2015) |
| EN 61788-18:2013 | Superconductivity - Part 18: Mechanical properties measurement - Room temperature tensile test of Ag- and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors |
| EN ISO 6508-2:2015 | Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2015) |
| DIN EN 1090-5:2017-07 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
| EN ISO 6508-3:2015 | Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO 6508-3:2015) |
| BS EN 61788-19:2014 | Superconductivity Mechanical properties measurement. Room temperature tensile test of reacted Nb<sub>3</sub>Sn composite superconductors |
| 16/30290358 DC : 0 | BS EN ISO 6507-2 - METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
| 04/30095200 DC : DRAFT MAY 2004 | EN ISO 6506-3 - METALLIC MATERIALS. BRINELL HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
| 13/30263776 DC : 0 | BS ISO 6506-3 - METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
| 15/30289820 DC : 0 | BS EN ISO 4545-3 - METALLIC MATERIALS - KNOOP HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
| DD ENV 12718:2001 | Medical compression hosiery |
| 04/30098250 DC : DRAFT MAY 2004 | EN ISO 6507-2 - METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
| EN ISO 7500-1:2018 | Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system (ISO 7500-1:2018) |
| CEI EN 61788-18 : 2014 | SUPERCONDUCTIVITY - PART 18: MECHANICAL PROPERTIES MEASUREMENT - ROOM TEMPERATURE TENSILE TEST OF AG- AND/OR AG ALLOY-SHEATHED BI-2223 AND BI-2212 COMPOSITE SUPERCONDUCTORS |
| BS EN ISO 6506-2:2014 | Metallic materials. Brinell hardness test Verification and calibration of testing machines |
| DIN EN ISO 7500-1:2016-05 | METALLIC MATERIALS - CALIBRATION AND VERIFICATION OF STATIC UNIAXIAL TESTING MACHINES - PART 1: TENSION/COMPRESSION TESTING MACHINES - CALIBRATION AND VERIFICATION OF THE FORCE-MEASURING SYSTEM (ISO 7500-1:2015) |
| EN ISO 6507-3:2018 | Metallic materials - Vickers hardness test - Part 3: Calibration of reference blocks (ISO 6507-3:2018) |
| EN ISO 6507-2:2018 | Metallic materials - Vickers hardness test - Part 2: Verification and calibration of testing machines (ISO 6507-2:2018) |
| EN ISO 6506-3:2014 | Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks (ISO 6506-3:2014) |
| DIN EN ISO 14577-2:2015-11 | METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 14577-2:2015) |
| DIN EN 12697-38:2004-10 | Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration; German version EN 12697-38:2004 |
| I.S. EN ISO 6508-2:2015 | METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES AND INDENTERS (ISO 6508-2:2015) |
| I.S. EN ISO 6508-3:2015 | METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 3 - CALIBRATION OF REFERENCE BLOCKS (ISO 6508-3:2015) |
| DIN EN 13584:2003-11 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF CREEP IN COMPRESSION FOR REPAIR PRODUCTS |
| DIN EN ISO 6506-3:2015-02 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS (ISO 6506-3:2014) |
| DIN EN ISO 6506-2:2015-02 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6506-2:2014) |
| I.S. EN ISO 6506-3:2014 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS (ISO 6506-3:2014) |
| I.S. EN ISO 14577-3:2015 | METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 3: CALIBRATION OF REFERENCE BLOCKS (ISO 14577-3:2015) |
| I.S. EN ISO 7500-2:2006 | METALLIC MATERIALS - VERIFICATION OF STATIC UNIAXIAL TESTING MACHINES - PART 2: TENSION CREEP TESTING MACHINES - VERIFICATION OF THE APPLIED FORCE |
| VDI/VDE 2646:2006-02 | Torque measuring devices/measuring chains - Minimum requirements in calibrations |
| VDI/VDE/DGQ/DKD 2622 Blatt 20:2013-12 | Calibration of measuring equipment for electrical quantities - Direct-voltage measuring amplifiers |
| 16/30290361 DC : 0 | BS EN ISO 6507-3 - METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
| 05/30095753 DC : DRAFT AUG 2005 | ISO 7500-2 - METALLIC MATERIALS - VERIFICATION OF STATIC UNIAXIAL TESTING MACHINES - PART 2: TENSION CREEP TESTING MACHINES - VERIFICATION OF THE FORCE APPLIED |
| 13/30264465 DC : 0 | BS EN ISO 6508-3 - METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
| DIN 51309:2005-12 | Materials testing machines - Calibration of static torque measuring devices |
| DD ENV 12719:2001 | Medical thrombosis prophylaxis hosiery |
| 16/30339349 DC : DRAFT APR 2016 | BS EN ISO 6506-2 - METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
| CEI EN 61788-19 : 2014 | SUPERCONDUCTIVITY - PART 19: MECHANICAL PROPERTIES MEASUREMENT - ROOM TEMPERATURE TENSILE TEST OF REACTED NB[3]SN COMPOSITE SUPERCONDUCTORS |
| DIN EN ISO 6507-3:2016-08 (Draft) | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
| I.S. EN 61788-6:2011 | SUPERCONDUCTIVITY - PART 6: MECHANICAL PROPERTIES MEASUREMENT - ROOM TEMPERATURE TENSILE TEST OF CU/NB-TI COMPOSITE SUPERCONDUCTORS |
| S.R. CEN TR 15831:2009 | METHOD FOR TESTING COMPRESSION IN MEDICAL HOSIERY |
| API 934-A : 2008 | MATERIALS AND FABRICATION OF 2 [1/4]CR-1MO, 2 [1/4]CR-1MO-[1/4]V, 3CR-1MO, AND 3CR-1MO-[1/4]V STEEL HEAVY WALL PRESSURE VESSELS FOR HIGH-TEMPERATURE, HIGH-PRESSURE HYDROGEN SERVICE |
| I.S. EN ISO 4545-2:2018 | METALLIC MATERIALS - KNOOP HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 4545-2:2017) |
| I.S. EN 1090-5:2017 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
| CEN/TR 15831:2009 | Method for testing compression in medical hosiery |
| ONORM EN ISO 6506-2 : 2015 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6506-2:2014) |
| ISO 17745:2016 | Steel wire ring net panels — Definitions and specifications |
| DIN EN ISO 6507-2:2016-08 (Draft) | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6507-2:2005) |
| I.S. CWA 15627:2006 | SMALL PUNCH TEST METHOD FOR METALLIC MATERIALS |
| DIN EN ISO 4545-2:2015-05 (Draft) | METALLIC MATERIALS - KNOOP HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
| EN ISO 6506-2:2014 | Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines (ISO 6506-2:2014) |
| EN 13584:2003 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of creep in compression for repair products |
| BIS IS 1501-2 : 2013 | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
| ISO 17746:2016 | Steel wire rope net panels and rolls — Definitions and specifications |
| I.S. CWA 15261-3:2005 | MEASUREMENT UNCERTAINTIES IN MECHANICAL TESTS ON METALLIC MATERIALS - PART 3: THE EVALUATION OF UNCERTAINTIES IN CREEP TESTING |
| 15/30289816 DC : 0 | BS EN ISO 4545-2 - METALLIC MATERIALS - KNOOP HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
| BS 1377-1:2016 | Methods of test for soils for civil engineering purposes General requirements and sample preparation |
| 13/30264459 DC : 0 | BS EN ISO 6508-2 - METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
| BS EN 61788-18:2013 | Superconductivity Mechanical properties measurement. Room temperature tensile test of Ag- and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors |
| I.S. EN 61788-18:2013 | SUPERCONDUCTIVITY - PART 18: MECHANICAL PROPERTIES MEASUREMENT - ROOM TEMPERATURE TENSILE TEST OF AG- AND/OR AG ALLOY-SHEATHED BI-2223 AND BI-2212 COMPOSITE SUPERCONDUCTORS |
| ISO 4545-2:2017 | Metallic materials — Knoop hardness test — Part 2: Verification and calibration of testing machines |
| EN ISO 4545-2:2018 | Metallic materials - Knoop hardness test - Part 2: Verification and calibration of testing machines (ISO 4545-2:2017) |
| BIS IS 6885-3 : 2011 | METALLIC MATERIALS - KNOOP HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
| I.S. EN ISO 6507-3:2018 | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS (ISO 6507-3:2018) |
| S.R. CWA 15627:2007 | SMALL PUNCH TEST METHOD FOR METALLIC MATERIALS |
| I.S. EN ISO 6506-2:2014 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6506-2:2014) |
| IEC 61788-18:2013 | Superconductivity - Part 18: Mechanical properties measurement - Room temperature tensile test of Ag- and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors |
| BS EN 13584:2003 | Products and systems for the protection and repair of concrete structures. Test methods. Determination of creep in compression for repair products |
| ISO 7500-2:2006 | Metallic materials — Verification of static uniaxial testing machines — Part 2: Tension creep testing machines — Verification of the applied force |
| ISO 6508-2:2015 | Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines and indenters |
| ISO 6508-3:2015 | Metallic materials — Rockwell hardness test — Part 3: Calibration of reference blocks |
| IEC 61788-19:2013 | Superconductivity - Part 19: Mechanical properties measurement - Room temperature tensile test of reacted Nb3Sn composite superconductors |
| ISO 14577-3:2015 | Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 3: Calibration of reference blocks |
| BS EN ISO 14577-3:2015 | Metallic materials. Instrumented indentation test for hardness and materials parameters Calibration of reference blocks |
| IEC 61788-6:2011 | Superconductivity - Part 6: Mechanical properties measurement - Room temperature tensile test of Cu/Nb-Ti composite superconductors |
| ISO 6506-3:2014 | Metallic materials — Brinell hardness test — Part 3: Calibration of reference blocks |
| ISO 14577-2:2015 | Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 2: Verification and calibration of testing machines |
| EN ISO 14577-2:2015 | Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines (ISO 14577-2:2015) |
| EN ISO 14577-3:2015 | Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2015) |
| EN ISO 7500-2:2006 | Metallic materials - Verification of static uniaxial testing machines - Part 2: Tension creep testing machines - Verification of the applied force (ISO 7500-2:2006) |
| 13/30280934 DC : 0 | BS EN ISO 7500-1 - METALLIC MATERIALS - VERIFICATION OF STATIC UNIAXIAL TESTING MACHINES - PART 1: TENSION/COMPRESSION TESTING MACHINES - VERIFICATION AND CALIBRATION OF THE FORCE-MEASURING SYSTEM |
| CEI EN 61788-6 : 2012 | SUPERCONDUCTIVITY - PART 6: MECHANICAL PROPERTIES MEASUREMENT - ROOM TEMPERATURE TENSILE TEST OF CU/NB-TI COMPOSITE SUPERCONDUCTORS |
| 13/30263773 DC : 0 | BS ISO 6506-2 - METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
| 12/30248593 DC : 0 | BS ISO 14577-2 - METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
| ISO 7005-2:1988 | Metallic flanges — Part 2: Cast iron flanges |
| BS ISO 1143:2010 | Metallic materials. Rotating bar bending fatigue testing |
| I.S. EN 61788-19:2014 | SUPERCONDUCTIVITY - PART 19: MECHANICAL PROPERTIES MEASUREMENT - ROOM TEMPERATURE TENSILE TEST OF REACTED NB[3]SN COMPOSITE SUPERCONDUCTORS |
| DIN EN ISO 4545-3:2015-05 (Draft) | METALLIC MATERIALS - KNOOP HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
| BS ISO 17745:2016 | Steel wire ring net panels. Definitions and specifications |
| ISO 6507-3:2018 | Metallic materials — Vickers hardness test — Part 3: Calibration of reference blocks |
| BIS IS 1501-3 : 2013 | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
| 12/30254325 DC : 0 | BS ISO 17340 - METALLIC MATERIALS - DUCTILITY TESTING - HIGH SPEED COMPRESSION TEST FOR POROUS AND CELLULAR METALS |
| BIS IS 1586-3 : 2012 | METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS (SCALES, A, B, C, D, E, F, G, H, K, N, T) |
| ISO 6507-2:2018 | Metallic materials — Vickers hardness test — Part 2: Verification and calibration of testing machines |
| I.S. EN ISO 6507-2:2018 | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6507-2:2018) |
| BIS IS 1500-3 : 2013 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
| ISO/TS 17242:2014 | Quasi-static calibration procedure for belt force transducers |
| EN ISO 4545-3:2018 | Metallic materials - Knoop hardness test - Part 3: Calibration of reference blocks (ISO 4545-3:2017) |
| I.S. EN ISO 4545-3:2018 | METALLIC MATERIALS - KNOOP HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS (ISO 4545-3:2017) |
| ISO 1143:2010 | Metallic materials — Rotating bar bending fatigue testing |
| I.S. EN ISO 7500-1:2018 | METALLIC MATERIALS - CALIBRATION AND VERIFICATION OF STATIC UNIAXIAL TESTING MACHINES - PART 1: TENSION/COMPRESSION -TESTING MACHINES - CALIBRATION AND VERIFICATION OF THE FORCEMEASURING SYSTEM (ISO 7500-1:2018) |
| BS EN ISO 6508-2:2015 | Metallic materials. Rockwell hardness test Verification and calibration of testing machines and indenters |
| BS EN ISO 4545-3:2005 | Metallic materials. Knoop hardness test Calibration of reference blocks |
| BS EN ISO 6507-3:2005 | Metallic materials. Vickers hardness test Calibration of reference blocks |
| BS EN ISO 6508-3:2015 | Metallic materials. Rockwell hardness test Calibration of reference blocks |
| BS EN ISO 6506-3:2014 | Metallic materials. Brinell hardness test Calibration of reference blocks |
| EN 1090-5:2017 | Execution of steel structures and aluminium structures - Part 5: Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications |
| EN 61788-6:2011 | Superconductivity - Part 6: Mechanical properties measurement - Room temperature tensile test of Cu/Nb-Ti composite superconductors |
| EN 12697-38:2004 | Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration |
| DIN EN ISO 7500-2:2007-04 | Metallic materials - Verification of static uniaxial testing machines - Part 2: Tension creep testing machines - Verification of the applied force (ISO 7500-2:2006) |
| EN 61788-19:2014 | Superconductivity - Part 19: Mechanical properties measurement - Room temperature tensile test of reacted Nb3Sn composite superconductors |
| UNE-EN 1090-5:2017 | Execution of steel structures and aluminium structures - Part 5: Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications |
| UNE-EN ISO 6508-3:2015 | Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO 6508-3:2015) |
| UNE-EN ISO 14577-3:2016 | Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2015) |
| UNE-EN ISO 14577-2:2016 | Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines (ISO 14577-2:2015) |
| UNE-EN ISO 6508-2:2015 | Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2015) |
| UNE-EN ISO 6506-3:2015 | Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks (ISO 6506-3:2014) |
| UNE-EN ISO 6506-2:2015 | Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines (ISO 6506-2:2014) |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ISO 7500-1:2015 | Metallic materials — Calibration and verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Calibration and verification of the force-measuring system |
Summarise
£148.00
Excluding VAT
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.