ISO 472:2013
Current
Current
The latest, up-to-date edition.
Plastics Vocabulary
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
Russian, English - French, English
Published date
30-01-2013
ISO 472:2013 defines terms used in the plastics industry, including terms and definitions appearing in plastics standards (of ISO/TC 61) and general terms and definitions of polymer science used in all aspects of plastics technology.
In addition to terms in English and French (two of the three official ISO languages), this vocabulary includes the equivalent terms in German; these have been included under the responsibility of the member body for Germany (DIN). However, only the terms and definitions in the official languages can be considered as ISO terms and definitions.
| DevelopmentNote |
Supersedes ISO/DIS 472. (01/2013)
|
| DocumentType |
Standard
|
| Pages |
170
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| SN EN ISO 472:2013 | Identical |
| UNI EN ISO 472 : 2013 | Identical |
| UNE-EN ISO 472:2015 | Identical |
| NF EN ISO 472 : 2013 | Identical |
| NS EN ISO 472 : 2013 | Identical |
| NBN EN ISO 472 : 2013 | Identical |
| EN ISO 472:2013 | Identical |
| UNI EN ISO 472:2019 | Identical |
| DIN EN ISO 472:2013-06 | Identical |
| I.S. EN ISO 472:2013 | Identical |
| PN EN ISO 472 : 2013 | Identical |
| NEN EN ISO 472 : 2013 | Identical |
| BS EN ISO 472:2013 | Identical |
| ONORM EN ISO 472 : 2013 | Identical |
| SS-EN ISO 472 :2013 | Identical |
| NBN T 40 001 : 1982 | Identical |
| NF ISO 472 : 1996 | Identical |
| DIN 55958:1988-12 | Similar to |
| NEN ISO 472 : 1999 | Identical |
| BS 1755-2:1974 | Similar to |
| NBN EN 1852-1 : 2009 | Identical |
| SNV ISO 472 : 1988 | Identical |
| BS ISO 472:1988 | Identical |
| BIS IS 2828 : 2001 AMD 1 | Identical |
| NFT 76 001 : 1981 | Similar to |
| IS 2828 : 2019 | Identical |
| 13/30280703 DC : 0 | BS EN 1329-1 - PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| 07/30148618 DC : 0 | BS ISO 22007-1 - PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 1: GENERAL PRINCIPLES |
| DIN EN ISO 22007-6 E : 2015 | PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 6: COMPARATIVE METHOD FOR LOW THERMAL CONDUCTIVITIES USING A TEMPERATURE-MODULATION TECHNIQUE (ISO 22007-6:2014) |
| 07/30169818 DC : 0 | BS EN 1013 - LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| BS ISO 17221:2014 | Plastics. Determination of image clarity (degree of sharpness of reflected or transmitted image) |
| BS EN 1519-1:2000 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polyethylene (PE) Specifications for pipes, fittings and the system |
| BS ISO 15040:1999 | Composites. Prepregs. Determination of gel time |
| BS EN ISO 16396-2:2017 | Plastics. Polyamide (PA) moulding and extrusion materials Preparation of test specimens and determination of properties |
| BS EN ISO 3451-1:1997 | Plastics. Determination of ash General methods |
| ONORM EN ISO 11357-6 : 2013 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 6: DETERMINATION OF OXIDATION INDUCTION TIME (ISOTHERMAL OIT) AND OXIDATION INDUCTION TEMPERATURE (DYNAMIC OIT) (ISO 11357-6:2008) |
| ISO 17088:2012 | Specifications for compostable plastics |
| 03/105582 DC : DRAFT APR 2003 | ISO 11357-4 - PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 4: DETERMINATION OF SPECIFIC HEAT CAPACITY |
| BS EN ISO 11357-7:2015 | Plastics — Differential scanning calorimetry (DSC) Part 7: Determination of crystallization kinetics |
| DIN EN 13245-3:2010-11 | Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 3: Designation of PVC-UE profiles |
| DIN EN ISO 178 E : 2013 | PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010 + AMD.1:2013) |
| BS ISO 30021:2013 | Plastics. Burning behavior. Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites |
| PD CEN ISO/TS 80004-6:2015 | Nanotechnologies. Vocabulary Nano-object characterization |
| PREN 1451-1 : DRAFT 2016 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| I.S. EN 1519-1:1999 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYETHYLENE (PE) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| 08/30191997 DC : 0 | BS ISO 1043-1 - PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMERS AND THEIR SPECIAL CHARACTERISTICS |
| PREN ISO 14910-1 : DRAFT 2010 | PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
| DIN EN ISO 16014-5:2012-10 | PLASTICS - DETERMINATION OF AVERAGE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY - PART 5: METHOD USING LIGHT-SCATTERING DETECTION (ISO 16014-5:2012) |
| 03/105580 DC : DRAFT APR 2003 | ISO 20965 - PLASTICS - DETERMINATION OF THE TRANSIENT EXTENSIONAL VISCOSITY OF POLYMER MELTS |
| BS EN 60903:2003 | Live working. Gloves of insulating material |
| UNI EN ISO 21003-1 : 2009 | MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 1: GENERAL |
| 13/30240164 DC : 0 | BS ISO 16365-1 - PLASTICS - THERMOPLASTIC POLYURETHANES FOR MOULDING AND EXTRUSION - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
| 12/30257998 DC : 0 | BS ISO 11357-2 - PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 2: DETERMINATION OF GLASS TRANSITION TEMPERATURE AND GLASS TRANSITION STEP HEIGHT |
| 16/30342057 DC : 0 | BS EN 17033 - PLASTICS - BIODEGRADABLE MULCH FILMS FOR USE IN AGRICULTURE AND HORTICULTURE - REQUIREMENTS AND TEST METHODS |
| BS ISO 16525-7:2014 | Adhesives. Test methods for isotropic electrically conductive adhesives Environmental test methods |
| I.S. EN ISO 11357-7:2015 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 7: DETERMINATION OF CRYSTALLIZATION KINETICS (ISO 11357-7:2015) |
| 17/30350548 DC : 0 | BS EN ISO 11357-6 - PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 6: DETERMINATION OF OXIDATION INDUCTION TIME (ISOTHERMAL OIT) AND OXIDATION INDUCTION TEMPERATURE (DYNAMIC OIT) |
| BS ISO 8516:2011 | Textile glass. Textured yarns. Basis for a specification |
| 16/30336859 DC : 0 | BS EN 1852-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| PREN 1519-1 : DRAFT 2017 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYETHYLENE (PE) - PART 1: REQUIREMENTS FOR PIPES, FITTINGS AND THE SYSTEM |
| DIN EN 15701 E : 2017 | PLASTICS - THERMOPLASTIC JACKETS FOR INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - REQUIREMENTS AND TEST METHODS |
| NF ISO 11357-3 : 2011 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 3: DETERMINATION OF TEMPERATURE AND ENTHALPY OF MELTING AND CRYSTALLIZATION |
| ISO 18263-2:2015 | Plastics Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging Part 2: Preparation of test specimens and determination of properties |
| DIN EN 15870 E : 2009 | ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF BUTT JOINTS |
| DIN EN ISO 11357-4 E : 2014 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 4: DETERMINATION OF SPECIFIC HEAT CAPACITY (ISO 11357-4:2014) |
| I.S. EN ISO 12086-1:2006 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
| BS EN 17098-2:2018 | Plastics. Barrier films for agricultural and horticultural soil disinfection by fumigation Method for film permeability determination using a static technique |
| BS ISO 17422:2002 | Plastics. Environmental aspects. General guidelines for their inclusion in standards |
| 12/30258334 DC : 0 | BS EN 1013 - LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTIC SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| 09/30209028 DC : 0 | BS EN 131-2 - LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING |
| CEN ISO/TS 80004-6:2015 | NANOTECHNOLOGIES - VOCABULARY - PART 6: NANO-OBJECT CHARACTERIZATION (ISO/TS 80004-6:2013) |
| BS PD ISO/TS 80004-6 : 2013 | NANOTECHNOLOGIES - VOCABULARY - PART 6: NANO-OBJECT CHARACTERIZATION |
| BS ISO 23559:2011 | Plastics. Film and sheeting. Guidance on the testing of thermoplastic films |
| S.R. CEN ISO/TR 22007-5:2014 | PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 5: RESULTS OF INTERLABORATORY TESTING OF POLY(METHYL METHACRYLATE) SAMPLES (ISO/TR 22007-5:2011) |
| 17/30371286 DC : 0 | BS EN 4866 - AEROSPACE SERIES - DEFINITIONS OF IMPERFECTIONS AND DEFECTS IN ORGANIC MATRIX COMPOSITE MATERIALS |
| BS ISO 11357-4 : 2005 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 4: DETERMINATION OF SPECIFIC HEAT CAPACITY |
| ISO 12013-2:2012 | Paints and varnishes — Determination of curing characteristics using a free damped oscillation method — Part 2: Glass transition temperature |
| IEC 62899-201:2016 | Printed electronics - Part 201: Materials - Substrates |
| ISO 30021:2013 | Plastics — Burning behaviour — Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites |
| 14/30311109 DC : 0 | BS EN 1453-1 - PLASTICS PIPING SYSTEMS WITH STRUCTURED-WALL PIPES FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES AND THE SYSTEM |
| NF ISO 15270 : 2009 | PLASTICS - GUIDELINES FOR THE RECOVERY AND RECYCLING OF PLASTICS WASTE |
| BS EN ISO 22391-1:2009 | Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT) General |
| ONORM EN ISO 15877-1 : 2011 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 1: GENERAL |
| DIN EN ISO 3451-1:2008-11 | PLASTICS - DETERMINATION OF ASH - PART 1: GENERAL METHODS |
| BS ISO 11667 : 1997 AMD 10676 | FIBRE REINFORCED PLASTICS - MOULDING COMPOUNDS AND PREPREGS - DETERMINATION OF RESIN, REINFORCEMENT-FIBRE AND MINERAL-FILLER CONTENT - DISSOLUTION METHODS |
| 08/30188330 DC : DRAFT AUG 2008 | BS EN ISO 178 - PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES |
| DIN EN ISO 11357-6:2013-04 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 6: DETERMINATION OF OXIDATION INDUCTION TIME (ISOTHERMAL OIT) AND OXIDATION INDUCTION TEMPERATURE (DYNAMIC OIT) (ISO 11357-6:2008) |
| DIN EN 13245-2 E : 2010 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 2: PVC-U PROFILES AND PVC-UE PROFILES FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES |
| BS ISO 20965:2005 | Plastics. Determination of the transient extensional viscosity of polymer melts |
| UNE-EN ISO 16014-5:2013 | Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 5: Method using light-scattering detection (ISO 16014-5:2012) |
| 04/30122909 DC : DRAFT SEP 2004 | ISO 19212 - ADHESIVES - DETERMINATION OF TEMPERATURE DEPENDENCE OF SHEAR STRENGTH |
| I.S. EN ISO 8257-1:2006 | PLASTICS - POLY(METHYL METHACRYLATE) (PMMA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
| I.S. EN ISO 4007:2012 | PERSONAL PROTECTIVE EQUIPMENT - EYE AND FACE PROTECTION - VOCABULARY (ISO 4007:2012) |
| BS ISO 13106:2014 | Plastics. Blow-moulded polypropylene containers for packaging of liquid foodstuffs |
| PREN ISO 15874-1 : DRAFT 2010 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 1: GENERAL |
| BS ISO 8605:2001 | Textile-glass-reinforced plastics. Sheet moulding compound (SMC). Basis for specification |
| BS ISO 14127:2008 | Carbon-fibre-reinforced composites. Determination of the resin, fibre and void contents |
| BS ISO 6707-3:2017 | Buildings and civil engineering works. Vocabulary Sustainability terms |
| DIN EN 15422:2008-06 | Precast concrete products - Specification of glassfibres for reinforcement of mortars and concretes |
| BS ISO 15166-1:1998 | Adhesives. Methods of preparing bulk specimens Two-part systems |
| BS EN ISO 16664:2017 | Gas analysis. Handling of calibration gases and gas mixtures. Guidelines |
| BS ISO 16664 : 2004 | GAS ANALYSIS - HANDLING OF CALIBRATION GASES AND GAS MIXTURES - GUIDELINES |
| 15/30315534 DC : 0 | BS EN ISO 16396-2 - PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| DIN 55657:2016-08 | Paints and varnishes - Test method for evaluation of elastic adhesives on coatings by peel test, peel strength test and tensile lap-shear strength test with additional stress by condensation test or cataplasm storage |
| ISO 13636:2012 | Plastics — Film and sheeting — Non-oriented poly(ethylene terephthalate) (PET) sheets |
| 09/30179627 DC : 0 | BS ISO 4007 - PERSONAL PROTECTIVE EQUIPMENT - EYE AND FACE PROTECTION - VOCABULARY |
| DIN EN 15345:2008-02 | Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates |
| 13/30258014 DC : 0 | BS EN ISO 11358-1 - PLASTICS - THERMOGRAVIMETRY (TG) OF POLYMERS - PART 1: GENERAL PRINCIPLES (ISO/DIS 11358-1:2013) |
| BS EN 60455-1:1998 | Resin based reactive compounds used for electrical insulation Definitions and general requirements |
| BS ISO 15750-3 : 2002 | PACKAGING - STEEL DRUMS - PART 3: INSERTED FLANGE-TYPE CLOSURE SYSTEMS |
| BS ISO 11357-6 : 2008 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 6: DETERMINATION OF OXIDATION INDUCTION TIME (ISOTHERMAL OIT) AND OXIDATION INDUCTION TEMPERATURE (DYNAMIC OIT) |
| S.R. CEN/TS 16861:2015 | PLASTICS - RECYCLED PLASTICS - DETERMINATION OF SELECTED MARKER COMPOUNDS IN FOOD GRADE RECYCLED POLYETHYLENE TEREPHTHALATE (PET) |
| 08/30161535 DC : 0 | BS EN ISO 1874-1 - PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION |
| 12/30240423 DC : 0 | BS ISO 16396-1 - PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM, MARKING OF PRODUCTS AND BASIS FOR SPECIFICATIONS |
| 12/30237820 DC : 0 | BS EN ISO 306 - PLASTICS - THERMOPLASTIC MATERIALS - DETERMINATION OF VICAT SOFTENING TEMPERATURE (VST) (ISO/DIS 306:2012) |
| ONORM EN ISO 16014-5 : 2012 | PLASTICS - DETERMINATION OF AVERAGE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY - PART 5: METHOD USING LIGHT-SCATTERING DETECTION (ISO 16014-5:2012) |
| 14/30284280 DC : 0 | BS ISO 6721-10 - PLASTICS - DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES - PART 10: COMPLEX SHEAR VISCOSITY USING A PARALLEL-PLATE OSCILLATORY RHEOMETER |
| BS ISO 12418-2:2012 | Plastics. Post-consumer poly(ethylene terephthalate) (PET) bottle recyclates Preparation of test specimens and determination of properties |
| ISO 14127:2008 | Carbon-fibre-reinforced composites Determination of the resin, fibre and void contents |
| UNE-EN ISO 877-1:2011 | Plastics - Methods of exposure to solar radiation - Part 1: General guidance (ISO 877-1:2009) |
| BS ISO 1268-10:2005 | Fibre-reinforced plastics. Methods of producing test plates Injection moulding of BMC and other long-fibre compounds. General principles and moulding of multipurpose test specimens |
| 05/30136084 DC : DRAFT JUL 2005 | ISO 12575-3 - THERMAL INSULATION - EXTERIOR INSULATING SYSTEMS FOR FOUNDATIONS - PART 3: TEST METHODS |
| DIN EN 13476-1:2015-11 (Draft) | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 1: GENERAL REQUIREMENTS AND PERFORMANCE CHARACTERISTICS |
| I.S. EN ISO 11357-2:2014 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 2: DETERMINATION OF GLASS TRANSITION TEMPERATURE AND GLASS TRANSITION STEP HEIGHT (ISO 11357-2:2013) |
| 01/121388 DC : DRAFT MARCH 2001 | ISO 307 PLASTICS - POLYAMIDES - DETERMINATION OF VISCOSITY NUMBER |
| 09/30192408 DC : 0 | BS ISO 16014-1 - PLASTICS - DETERMINATION OF AVERAGE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY - PART 1: GENERAL PRINCIPLES |
| 05/30132152 DC : DRAFT APR 2005 | ISO 21004 - PLASTICS PIPING SYSTEMS - MULTILAYER PIPES AND THEIR JOINTS, BASED ON THERMOPLASTICS, FOR WATER SUPPLY |
| BS ISO 15034:2000 | Composites. Prepregs. Determination of resin flow |
| UNI EN 16240 : 2014 | LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| ISO 16525-7:2014 | Adhesives Test methods for isotropic electrically conductive adhesives Part 7: Environmental test methods |
| 06/30136260 DC : DRAFT MAR 2006 | ISO 21138-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYLCHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 1 - MATERIAL AND PERFORMANCE SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEMS |
| ONORM EN ISO 22391-1 : 2010 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT) - PART 1: GENERAL |
| EN ISO 15494:2015 | Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system (ISO 15494:2015) |
| EN 1555-1:2010 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General |
| ASTM D 1972 : 1997 | Standard Practice for Generic Marking of Plastic Products |
| UNE-EN ISO 6721-1:2012 | Plastics - Determination of dynamic mechanical properties - Part 1: General principles (ISO 6721-1:2011) |
| ONORM EN ISO 11357-3 : 2013 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 3: DETERMINATION OF TEMPERATURE AND ENTHALPY OF MELTING AND CRYSTALLIZATION (ISO 11357-3:2011) |
| ISO 10210:2012 | Plastics — Methods for the preparation of samples for biodegradation testing of plastic materials |
| UNI EN ISO 15877-1 : 2011 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 1: GENERAL |
| ISO 22007-1:2017 | Plastics — Determination of thermal conductivity and thermal diffusivity — Part 1: General principles |
| I.S. EN 15345:2007 | PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYPROPYLENE (PP) RECYCLATES |
| I.S. EN 16575:2014 | BIO-BASED PRODUCTS - VOCABULARY |
| I.S. EN 17098-1:2018 | PLASTICS - BARRIER FILMS FOR AGRICULTURAL AND HORTICULTURAL SOIL DISINFECTION BY FUMIGATION - PART 1: SPECIFICATIONS FOR BARRIER FILMS |
| I.S. EN 61479:2001 | LIVE WORKING - FLEXIBLE CONDUCTOR COVERS (LINE HOSES) OF INSULATING MATERIAL |
| BS EN 16153 : 2013 | LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| S.R. CEN TS 15534-1:2007 | WOOD-PLASTICS COMPOSITES (WPC) - PART 1: TEST METHODS FOR CHARACTERISATION OF WPC MATERIALS AND PRODUCTS |
| UNE-EN 16575:2015 | Bio-based products - Vocabulary |
| I.S. CLC/TS 61112:2006 | BLANKETS OF INSULATING MATERIAL FOR ELECTRICAL PURPOSES |
| ISO 6721-10:2015 | Plastics Determination of dynamic mechanical properties Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer |
| ISO 18437-5:2011 | Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 5: Poisson ratio based on comparison between measurements and finite element analysis |
| ISO 1382:2012 | Rubber Vocabulary |
| BS ISO 16014-3:2012 | Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography Low-temperature method |
| ISO 16365-1:2014 | Plastics — Thermoplastic polyurethanes for moulding and extrusion — Part 1: Designation system and basis for specifications |
| UNI EN ISO 6721-1 : 2011 | PLASTICS - DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES - PART 1: GENERAL PRINCIPLES |
| UNI CEN/TS 16011 : 2013 | PLASTICS - RECYCLED PLASTICS - SAMPLE PREPARATION |
| ONORM EN ISO 3451-1 : 2008 | PLASTICS - DETERMINATION OF ASH - PART 1: GENERAL METHODS |
| EN ISO 899-1:2017 | Plastics - Determination of creep behaviour - Part 1: Tensile creep (ISO 899-1:2017) |
| UNI EN ISO 25762 : 2012 | PLASTICS - GUIDANCE ON THE ASSESSMENT OF THE FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED POLYMER COMPOSITES |
| ISO 604:2002 | Plastics — Determination of compressive properties |
| ISO 18437-2:2005 | Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 2: Resonance method |
| CEI EN 60893-1 : 2005 | INSULATING MATERIALS - INDUSTRIAL RIGID LAMINATED SHEETS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 1: DEFINITIONS, DESIGNATIONS AND GENERAL REQUIREMENTS |
| ISO 15877-1:2009 | Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 1: General |
| EN ISO 10210:2017 | Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials (ISO 10210:2012) |
| BS EN 131-6:2015 | Ladders Telescopic ladders |
| ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
| DIN EN ISO 20568-2:2015-07 (Draft) | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20568-2:2017) |
| CSA Z364.1.1-Z364.1.2 : 0 | HAEMODIALYZERS, HAEMOFILTERS, AND HAEMOCONCENTRATORS/EXTRACORPOREAL BLOOD CIRCUIT FOR HAEMODIALYZERS, HAEMOFILTERS, AND HAEMOCONCENTRATORS |
| UNE-EN ISO 10927:2012 | Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2011) |
| I.S. EN ISO 15876-1:2017 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTENE (PB) - PART 1: GENERAL (ISO 15876-1:2017) |
| I.S. EN ISO 899-1:2017 | PLASTICS - DETERMINATION OF CREEP BEHAVIOUR - PART 1: TENSILE CREEP (ISO 899-1:2017) |
| UNI EN 1555-1 : 2011 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL |
| EN ISO 899-2:2003/A1:2015 | Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading - Amendment 1 (ISO 899-2:2003/Amd 1:2015) |
| EN ISO 8330:2014 | Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:2014) |
| DIN EN 13121-1:2003-10 | GRP tanks and vessels for use above ground - Part 1: Raw materials; Specification conditions and acceptance conditions |
| DIN EN ISO 11337:2011-04 | Plastics - Polyamides - Determination of -caprolactam and -laurolactam by gas chromatography (ISO 11337:2010) |
| DIN EN ISO 12543-1:2011-12 | Glass in building - Laminated glass and laminated safety glass - Part 1: Definitions and description of component parts (ISO 12543-1:2011) |
| EN 13121-1:2003 | GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 1: RAW MATERIALS - SPECIFICATION CONDITIONS AND ACCEPTANCE CONDITIONS |
| DIN EN 13421:2006-05 | Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites |
| DIN EN 12201-1:2011-11 | Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General |
| DIN EN 14598-1:2005-07 | Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 1: Designation |
| BS EN 14020-3:2002 | Reinforcements. Specification for textile glass rovings Specific requirements |
| BS EN 1566-1:2000 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Chlorinated poly(vinyl chloride) (PVC-C) Specification for pipes, fittings and the system |
| BS EN 15347:2007 | Plastics. Recycled Plastics. Characterization of plastics waste |
| BS EN 14408-1:2004 | Plastics piping systems for renovation of underground gas supply networks General |
| BS EN 12006-2 : 1998 | NON-ACTIVE SURGICAL IMPLANTS - PARTICULAR REQUIREMENTS FOR CARDIAC AND VASCULAR IMPLANTS - PART 2: VASCULAR PROSTHESES INCLUDING CARDIAC VALVE CONDUITS |
| DIN EN 15342 E : 2008 | PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLYSTYRENE (PS) RECYCLATES |
| BS EN ISO 12114:1997 | Fibre-reinforced plastics. Thermosetting moulding compounds and prepregs. Determination of cure characteristics |
| BS EN 13677-2:2003 | Reinforced thermoplastic moulding compounds. Specification for GMT Methods of test and general requirements |
| UNE-EN 16245-2:2014 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers |
| BS EN 13244-1:2002 | Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage. Polyethylene (PE) General |
| BS EN ISO 14528-3:2000 | Plastics. Melamine-formaldehyde powder moulding compounds (MF-PMCs) Requirements for selected moulding compounds |
| BS EN 14118-1:2003 | Reinforcement. Specifications for textile glass mats (chopped strand and continuous filament mats) Designation |
| IEC 62011-1:2002 | Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements |
| UNE-EN ISO 11339:2010 | Adhesives - T-peel test for flexible-to-flexible bonded assemblies (ISO 11339:2010) |
| BS EN ISO 12086-1:2006 | Plastics. Fluoropolymer dispersions and moulding and extrusion materials Designation system and basis for specifications |
| BS EN ISO 15252-1:2000 | Plastics. Epoxy powder moulding compounds (EP-PMCs) Designation system and basis for specifications |
| BS EN 1555-1:2010 | Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) General |
| UNE-EN ISO 15876-1:2017 | Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 1: General (ISO 15876-1:2017) |
| ISO 8062-1:2007 | Geometrical product specifications (GPS) Dimensional and geometrical tolerances for moulded parts Part 1: Vocabulary |
| BS EN ISO 14526-1:2000 | Plastics. Phenolic powder moulding compounds (PF-PMCs) Designation system and basis for specifications |
| BS EN ISO 1172:1999 | Textile-glass-reinforced plastics. Prepregs, moulding compounds and laminates. Determination of the textile-glass and mineral-filler content. Calcination methods |
| BS EN 13473-2:2001 | Reinforcement. Specifications for multi-axial multi-ply fabrics Methods of test and general requirements |
| BS EN 14118-3:2003 | Reinforcement. Specifications for textile glass mats (chopped strand and continuous filament mats) Specific requirements |
| ISO 2559:2011 | Textile glass Mats (made from chopped or continuous strands) Designation and basis for specifications |
| ISO 1886:1990 | Reinforcement fibres Sampling plans applicable to received batches |
| DIN EN ISO 3672-1:2002-07 | PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 1: DESIGNATION SYSTEM |
| ONORM EN ISO 13000-2 : 2006 | PLASTICS - POLYTETRAFLUOROETHYLENE (PTFE) SEMI-FINISHED PRODUCTS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| CEN/TR 15353:2007 | Plastics - Recycled plastics - Guidelines for the development of standards for recycled plastics |
| EN 12201-1:2011 | Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General |
| DIN EN ISO 8257-1:2006-06 | PLASTICS - POLY(METHYL METHACRYLATE) (PMMA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
| EN 61112:2009 | Live working - Electrical insulating blankets |
| EN 61479:2001/A1:2002 | LIVE WORKING - FLEXIBLE CONDUCTOR COVERS (LINE HOSES) OF INSULATING MATERIAL |
| EN 13417-2:2001 | Reinforcement - Specifications for woven fabrics - Part 2: Methods of test and general requirements |
| EN 12481 : 2000 | SELF ADHESIVE TAPES - TERMINOLOGY |
| EN 12971-2:1999 | Reinforcements - Specification for textile glass chopped strands - Part 2: Test methods and general requirements |
| DIN EN 1452-1:1999-09 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL |
| UNI EN ISO 12543-1 : 2011 | GLASS IN BUILDING - LAMINATED GLASS AND LAMINATED SAFETY GLASS - PART 1: DEFINITIONS AND DESCRIPTION OF COMPONENT PARTS |
| DIN EN ISO 12086-1:2006-05 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
| EN 12654-1:1998 | Textile glass - Yarns - Part 1: Designation |
| DIN EN 13244-1:2003-04 | PLASTICS PIPING SYSTEMS FOR BURIED AND ABOVE-GROUND PRESSURE SYSTEMS FOR WATER FOR GENERAL PURPOSES, DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 1: GENERAL |
| EN 61111 : 2009 | LIVE WORKING - ELECTRICAL INSULATING MATTING |
| DIN EN 15701:2017-02 | PLASTICS - THERMOPLASTIC JACKETS FOR INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 20568-1:2017-10 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 20568-1:2017) |
| EN 13244-1:2002 | Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 1: General |
| CEN/TS 15534-1:2007 | Wood-plastics composites (WPC) - Part 1: Test methods for characterisation of WPC materials and products |
| EN 12575:1998 | PLASTICS - THERMOSET MOULDING COMPOUNDS - DETERMINATION OF THE DEGREE OF FIBRE WET OUT IN SMC |
| DIN EN ISO 9163:2005-07 | Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings (ISO 9163:2005); German version EN ISO 9163:2005 |
| CEN/TS 16861:2015 | Plastics - Recycled plastics - Determination of selected marker compounds in food grade recycled polyethylene terephthalate (PET) |
| EN 12654-3:1998 | Textile glass - Yarns - Part 3: General requirements for general applications |
| DIN EN ISO 15605:2004-11 | Adhesives - Sampling (ISO 15605:2000) |
| EN ISO 12543-1:2011 | Glass in building - Laminated glass and laminated safety glass - Part 1: Definitions and description of component parts (ISO 12543-1:2011) |
| EN 13245-2:2008/AC:2009 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 2: PVC-U PROFILES AND PVC-UE PROFILES FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES |
| DIN EN 14447:2005-07 | Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification; German version of EN 14447:2005 |
| EN 12576:1998 | Plastics - Fibre reinforced composites - Preparation of compression moulded test plates of SMC, BMC and DMC |
| DIN EN 14649:2005-07 | PRECAST CONCRETE PRODUCTS - TEST METHOD FOR STRENGTH RETENTION OF GLASS FIBRES IN CEMENT AND CONCRETE (SIC TEST) |
| EN 60464-1:1999/A1:2006 | VARNISHES USED FOR ELECTRICAL INSULATION - PART 1: DEFINITIONS AND GENERAL REQUIREMENTS |
| EN 12666-1:2005+A1:2011 | Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system |
| EN 1013:2012+A1:2014 | LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| EN 61212-3-2:2013 | Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Round laminated moulded tubes |
| DIN EN ISO 306:2014-03 | Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2013) |
| DIN EN ISO 6401:2008-12 | Plastics - Poly(vinyl chloride) - Determination of residual vinyl chloride monomer - Gas-chromatographic method (ISO 6401:2008) |
| DIN EN ISO 1043-3:2017-03 | PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 3: PLASTICIZERS (ISO 1043-3:2016) |
| DIN EN ISO 178:2013-09 | PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010 + AMD.1:2013) |
| EN 13473-1:2001 | Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 1: Designation |
| EN 12971-1:1999 | Reinforcements - Specification for textile glass chopped strands - Part 1: Designation |
| EN ISO 10365:1995 | Adhesives - Designation of main failure patterns (ISO 10365:1992) |
| EN 13417-3:2001 | Reinforcement - Specifications for woven fabrics - Part 3: Specific requirements |
| EN 13245-3:2010 | Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 3: Designation of PVC-UE profiles |
| ONORM EN 1329-1 : 2014 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| DIN EN ISO 20568-2:2017-10 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20568-2:2017) |
| EN 13473-3:2001 | Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 3: Specific requirements |
| EN 61212-3-3:2006 | INSULATING MATERIALS - INDUSTRIAL RIGID ROUND LAMINATED TUBES AND RODS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 3: ROUND LAMINATED MOULDED RODS |
| ONORM EN 1555-1 : 2015 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL |
| ONORM EN 1401-1 : 2009 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| NF EN ISO 11337 : 2011 | PLASTICS - POLYAMIDES - DETERMINATION OF EPSILONN-CAPROLACTAM AND OMEGA-LAUROLACTAM BY GAS CHROMATOGRAPHY |
| ONORM EN 12201-1 : 2015 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 1: GENERAL |
| ONORM EN ISO 11337 : 2011 | PLASTICS - POLYAMIDES - DETERMINATION OF E-CAPROLACTAM AND W-LAUROLACTAM BY GAS CHROMATOGRAPHY |
| I.S. EN ISO 1172:1999 | TEXTILE-GLASS-REINFORCED PLASTICS - PREPREGS, MOULDING COMPOUNDS AND LAMINATES - DETERMINATION OF THE TEXTILE-GLASS AND MINERAL-FILLER CONTENT - CALCINATION METHODS |
| ONORM EN ISO 306 : 2014 | PLASTICS - THERMOPLASTICS MATERIALS - DETERMINATION OF VICAT SOFTENING TEMPERATURE (VST) (ISO 306:2013) |
| ONORM EN ISO 6401 : 2008 | PLASTICS - POLY(VINYL CHLORIDE) - DETERMINATION OF RESIDUAL VINYL CHLORIDE MONOMER - GAS-CHROMATOGRAPHIC METHOD |
| 18/30371677 DC : DRAFT MAY 2018 | BS EN 1401-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEMS |
| UNE-EN ISO 20568-1:2017 | Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 20568-1:2017) |
| ISO 21930:2017 | Sustainability in buildings and civil engineering works — Core rules for environmental product declarations of construction products and services |
| DIN EN ISO 11357-6 E : 2013 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 6: DETERMINATION OF OXIDATION INDUCTION TIME (ISOTHERMAL OIT) AND OXIDATION INDUCTION TEMPERATURE (DYNAMIC OIT) (ISO 11357-6:2008) |
| UNE-EN ISO 15494:2016 | Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system (ISO 15494:2015) |
| CEI EN 60454-1 : 1997 | SPECIFICATIONS FOR PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 1: GENERAL REQUIREMENTS |
| 12/30254691 DC : DRAFT MAR 2012 | BS ISO 16525-7 - ADHESIVES - TEST METHODS FOR ISOTROPICALLY ELECTRICALLY CONDUCTING ADHESIVES - PART 7: ENVIRONMENTAL TEST METHODS |
| 13/30276234 DC : 0 | BS EN 15346 - PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES |
| 06/30134637 DC : DRAFT FEB 2006 | ISO 22007-3 - PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND DIFFUSIVITY - PART 3: TEMPERATURE WAVE ANALYSIS METHOD |
| DIN EN ISO 8257-1 E : 2006 | PLASTICS - POLY(METHYL METHACRYLATE) (PMMA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
| 08/30175867 DC : DRAFT JAN 2008 | BS EN 61111 - LIVE WORKING - ELECTRICAL INSULATING MATTING |
| DIN EN ISO 10927:2011-07 | PLASTICS - DETERMINATION OF THE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMER SPECIES BY MATRIX-ASSISTED LASER DESORPTION/IONIZATION TIME-OF-FLIGHT MASS SPECTROMETRY (MALDI-TOF-MS) |
| 11/30242926 DC : DRAFT MAY 2011 | BS ISO 12000 - PLASTICS/RUBBER - POLYMER DISPERSIONS AND RUBBER LATICES (NATURAL AND SYNTHETIC) - DEFINITIONS AND REVIEW OF TEST METHODS |
| I.S. EN ISO 12086-2:2006 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| SAE AMS 2980/1 : 2014 | CARBON FIBER FABRIC AND EPOXY RESIN WET LAY-UP REPAIR MATERIAL - PART 1 - GENERAL REQUIREMENTS |
| DIN EN ISO 11357-7:2015-12 | Plastics - Differential scanning calorimetry (DSC) - Part 7: Determination of crystallization kinetics (ISO 11357-7:2015); German version EN ISO 11357-7:2015 |
| 11/30246452 DC : 0 | BS EN 14758-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE WITH MINERAL MODIFIERS (PP-MD) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| ISO 22621-1:2007 | Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) Polyamide (PA) Part 1: General |
| UNI EN 15343 : 2008 | PLASTICS - RECYCLED PLASTICS - PLASTICS RECYCLING TRACEABILITY AND ASSESSMENT OF CONFORMITY AND RECYCLED CONTENT |
| 02/121892 DC : DRAFT APR 2002 | PREN 14447 - FIBRE REINFORCED PLASTICS - GLASS MAT REINFORCED THERMOPLASTICS (GMT) - DETERMINATION OF FLOWABILITY AND SOLIDIFICATION |
| 00/565107 DC : DRAFT NOV 2000 | BS EN 14052 - SPECIFICATION FOR HIGH PERFORMANCE INDUSTRIAL SAFETY HELMETS |
| 07/30171973 DC : 0 | BS EN ISO 6721-12 - PLASTICS - DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES - PART 12: COMPRESSIVE VIBRATION - NON-RESONANCE METHOD |
| DIN EN 60454-1 : 1997 | SPECIFICATIONS FOR PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 1: GENERAL REQUIREMENTS |
| BS ISO 11359-2:1999 | Plastics. Thermomechanical analysis (TMA) Determination of coefficient of linear thermal expansion and glass transition temperature |
| 04/30091878 DC : DRAFT FEB 2004 | BS EN ISO 13000-2 - PLASTICS - POLYTETRAFLUOROETHYLENE (PTFE) SEMI-FINISHED PRODUCTS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| PD ISO/TR 13014:2012 | Nanotechnologies. Guidance on physico-chemical characterization of engineered nanoscale materials for toxicologic assessment |
| 12/30266170 DC : 0 | BS EN 15534-1 - COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1 : TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS |
| PREN 17098-2 : DRAFT 2017 | PLASTICS - BARRIER FILMS FOR AGRICULTURAL AND HORTICULTURAL SOIL DISINFECTION BY FUMIGATION - PART 2: METHOD FOR FILM PERMEABILITY DETERMINATION USING A STATIC TECHNIQUE |
| 11/30239977 DC : 0 | BS EN 16245-2 - FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: ADDITIONAL REQUIREMENTS FOR RESINS, CURING SYSTEMS, ADDITIVES AND MODIFIERS |
| 07/30175034 DC : DRAFT DEC 2007 | BS ISO 18352 - CARBON-FIBRE-REINFORCED PLASTICS - DETERMINATION OF COMPRESSION-AFTER-IMPACT PROPERTIES AT A SPECIFIED IMPACT ENERGY LEVEL |
| BS ISO 4901:2011 | Reinforced plastics based on unsaturated-polyester resins. Determination of the residual styrene monomer content, as well as the content of other volatile aromatic hydrocarbons, by gas chromatography |
| DIN EN ISO 25762:2012-04 | Plastics - Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites (ISO 25762:2009) |
| 11/30240161 DC : 0 | BS ISO 18606 - PACKAGING AND THE ENVIRONMENT - ORGANIC RECYCLING |
| I.S. EN 13244-1:2002 | PLASTICS PIPING SYSTEMS FOR BURIED AND ABOVE-GROUND PRESSURE SYSTEMS FOR WATER FOR GENERAL PURPOSES DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - GENERAL |
| DIN EN ISO 877-1:2016-09 (Draft) | PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE |
| ONORM EN ISO 11357-4 : 2014 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 4: DETERMINATION OF SPECIFIC HEAT CAPACITY (ISO 11357-4:2014) |
| DIN EN 16245-2:2013-08 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers |
| BS ISO 3598:2011 | Textile glass. Yarns. Basis for a specification |
| PD CEN/TS 16861:2015 | Plastics. Recycled plastics. Determination of selected marker compounds in food grade recycled polyethylene terephthalate (PET) |
| 12/30254697 DC : 0 | BS ISO 16525-9 - ADHESIVES - TEST METHODS FOR ISOTROPICALLY ELECTRICALLY CONDUCTING ADHESIVES - PART 9: DETERMINATION OF HIGH-SPEED SIGNAL-TRANSMISSION CHARACTERISTICS |
| 10/30216000 DC : 0 | BS EN 61212-3-2 - INSULATING MATERIALS - INDUSTRIAL RIGID ROUND LAMINATED TUBES AND RODS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 2: ROUND LAMINATED MOULDED TUBES |
| 17/30330561 DC : DRAFT MAY 2017 | BS ISO 20819 - PLASTICS - WOOD-PLASTIC RECYCLED COMPOSITES (WPRC) - SPECIFICATION |
| BS ISO 2797:2017 | Textile glass. Rovings. Basis for a specification |
| 17/30361211 DC : 0 | BS EN 513 - PLASTICS - POLY(VINYL CHLORIDE) (PVC) BASED PROFILES - DETERMINATION OF THE RESISTANCE TO ARTIFICIAL WEATHERING |
| 12/30258011 DC : 0 | BS ISO 11359-1 - PLASTICS - THERMOMECHANICAL ANALYSIS (TMA) - PART 1: GENERAL PRINCIPLES |
| BS ISO 2561:2012 | Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PSI) by gas chromatography |
| 14/30273496 DC : 0 | BS ISO 21067 - PACKAGING - VOCABULARY |
| EN 15344:2007 | Plastics - Recycled Plastics - Characterisation of Polyethylene (PE) recyclates |
| 16/30321526 DC : 0 | BS ISO 19935-1 - PLASTICS - TEMPERATURE MODULATED DSC - PART 1: GENERAL PRINCIPLES |
| BS ISO 19212:2006 | Adhesives. Determination of temperature dependence of shear strength |
| BS EN ISO 4007:2012 | Personal protective equipment. Eye and face protection. Vocabulary |
| BS ISO 20819:2018 | Plastics. Wood-plastic recycled composites (WPRC). Specification |
| 08/30175871 DC : DRAFT JAN 2008 | BS EN 61112 - LIVE WORKING - ELECTRICAL INSULATING BLANKETS |
| DIN EN 15857:2010-05 | Non-destructive testing - Acoustic emission - Testing of fibre-reinforced polymers - Specific methodology and general evaluation criteria |
| BS EN 15422:2008 | Precast concrete products. Specification of glassfibres for reinforcement of mortars and concretes |
| 16/30332879 DC : 0 | BS EN 1451-1 - PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| 98/123516 DC : DRAFT JULY 1998 | PREN 13121-1 - GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 1: RAW MATERIALS - ACCEPTANCE CONDITIONS AND USAGE CONDITIONS |
| ISO 12000:2014 | Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Definitions and review of test methods |
| DIN EN ISO 20568-2 E : 2017 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20568-2:2017) |
| ASTM D 1972 : 1997 : R2001 | Standard Practice for Generic Marking of Plastic Products |
| 14/30275072 DC : 0 | BS ISO 17902 - WRAPPED ELECTROFOAMING JOINTS FOR PE PIPING SYSTEMS WITH SMOOTH OUTER WALL FOR GRAVITY DRAINS AND SEWERS |
| PD CEN/TS 16010:2013 | Plastics. Recycled plastics. Sampling procedures for testing plastics waste and recyclates |
| 12/30254685 DC : DRAFT MAR 2012 | BS ISO 16525-5 - ADHESIVES - TEST METHODS FOR ISOTROPICALLY ELECTRICALLY CONDUCTING ADHESIVES - PART 5: SHEAR FATIGUE TESTING |
| BS ISO 16525-5:2014 | Adhesives. Test methods for isotropic electrically conductive adhesives Determination of shear fatigue |
| 17/30355108 DC : 0 | BS ISO 6237 - ADHESIVES - WOOD-TO-WOOD ADHESIVE BONDS - DETERMINATION OF SHEAR STRENGTH BY TENSILE LOADING |
| BS 7281:1990 | Specification for polyethylene pipes for the supply of gaseous fuels |
| PREN 1329-1 : DRAFT 2013 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| UNI EN ISO 877-1 : 2011 | PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE |
| PREN ISO 1874-1 : DRAFT 2008 | PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION |
| DIN ISO 16486-1:2015-07 | Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 1: General (ISO 16486-1:2012 + AMD 1:2014) |
| 10/30192393 DC : 0 | BS ISO 4901 - REINFORCED PLASTICS BASED ON UNSATURATED POLYESTER RESINS - DETERMINATION OF RESIDUAL STYRENE MONOMER CONTENT AS WELL AS THE CONTENT OF OTHER VOLATILE AROMATIC HYDROCARBONS, BY GAS CHROMATOGRAPHY |
| BS ISO 16525-9:2014 | Adhesives. Test methods for isotropic electrically conductive adhesives Determination of high-speed signal-transmission characteristics |
| BS ISO 11357-3:1999 | Plastics. Differential scanning calorimetry (DSC) Determination of temperature and enthalpy of melting and crystallization |
| BS EN 61479:2001 | Live working. Flexible conductor covers (line hoses) of insulating material |
| 17/30360679 DC : DRAFT SEP 2017 | BS EN 17152-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND CONVEYANCE AND STORAGE OF NON-POTABLE WATER - BOXES USED FOR INFILTRATION, ATTENUATION AND STORAGE SYSTEMS - PART 1: SPECIFICATIONS FOR STORM WATER BOXES MADE OF PP AND PVC |
| 09/30184235 DC : 0 | BS ISO 10210 - PLASTICS - PREPARATION OF TEST AND REFERENCE MATERIALS FOR BIODEGRADATION TESTING |
| 11/30196213 DC : 0 | BS ISO 12817 - FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF OPENHOLE COMPRESSION STRENGTH |
| 07/30151497 DC : 0 | ISO 26842 - ADHESIVES - GUIDELINES FOR THE SELECTION OF ADHESIVES FOR INDOOR WOOD PRODUCTS BY DURABILITY TESTING |
| 10/30211421 DC : 0 | BS ISO 3598 - TEXTILE GLASS - YARNS - BASIS FOR A SPECIFICATION |
| PD ISO/TR 13329:2012 | Nanomaterials. Preparation of Material Safety Data Sheet (MSDS) |
| 07/30161721 DC : 0 | BS ISO 11357-6 - PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 6: DETERMINATION OF OXIDATION INDUCTION TIME (ISOTHERMAL OIT) AND OXIDATION INDUCTION TEMPERATURE (DYNAMIC OIT) |
| I.S. EN ISO 16396-2:2017 | PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 16396-2:2017) |
| 13/30257555 DC : 0 | BS EN ISO 22007-2 - PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 2: TRANSIENT PLANE HEAT SOURCE (HOT DISC) METHOD (ISO/DIS 22007-2:2013) |
| 07/30165577 DC : 0 | BS EN 1852-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| DIN EN 13245-3 E : 2010 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES |
| BS ISO 16525-4:2014 | Adhesives. Test methods for isotropic electrically conductive adhesives Determination of shear strength and electrical resistance using rigid-to-rigid bonded assemblies |
| UNI EN 15857 : 2010 | NON-DESTRUCTIVE TESTING - ACOUSTIC EMISSION - TESTING OF FIBRE-REINFORCED POLYMERS - SPECIFIC METHODOLOGY AND GENERAL EVALUATION CRITERIA |
| DIN EN ISO 11357-2:2014-07 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 2: DETERMINATION OF GLASS TRANSITION TEMPERATURE AND GLASS TRANSITION STEP HEIGHT (ISO 11357-2:2013) |
| BS 2782-3:Method 323G:1997 | Methods of testing plastics. Mechanical properties Complex shear viscosity using a parallel-plate oscillatory rheometer |
| DD CEN/TS 15534-1:2007 | Wood-plastics composites (WPC) Test methods for characterisation of WPC materials and products |
| ISO 4007:2012 | Personal protective equipment Eye and face protection Vocabulary |
| IEC TR 62392:2006 | Suitability of typical electrical insulating material (EIM) for polymer recycling |
| PREN ISO 22007-2 : DRAFT 2013 | PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 2: TRANSIENT PLANE HEAT SOURCE (HOT DISC) METHOD (ISO/DIS 22007-2:2013) |
| I.S. EN ISO 10210:2017 | PLASTICS - METHODS FOR THE PREPARATION OF SAMPLES FOR BIODEGRADATION TESTING OF PLASTIC MATERIALS (ISO 10210:2012) |
| S.R. CEN ISO/TS 80004-6:2015 | NANOTECHNOLOGIES - VOCABULARY - PART 6: NANO-OBJECT CHARACTERIZATION (ISO/TS 80004-6:2013) |
| 03/302293 DC : DRAFT APR 2003 | EN 14649 - PRECAST CONCRETE PRODUCTS - TEST METHOD FOR STRENGTH RETENTION OF GLASS FIBRES IN CEMENT AND CONCRETE (SIC TEST) |
| UNI EN 15345 : 2008 | PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYPROPYLENE (PP) RECYCLATES |
| DIN EN ISO 16664:2016-07 (Draft) | GAS ANALYSIS - HANDLING OF CALIBRATION GASES AND GAS MIXTURES - GUIDELINES (ISO 16664:2017) |
| CEI EN 61111 : 2010 | LIVE WORKING - ELECTRICAL INSULATING MATTING |
| ISO 3598:2011 | Textile glass Yarns Basis for a specification |
| I.S. EN 61111:2009 | LIVE WORKING - ELECTRICAL INSULATING MATTING |
| ISO 17212:2012 | Structural adhesives — Guidelines for the surface preparation of metals and plastics prior to adhesive bonding |
| ISO 3451-1:2008 | Plastics Determination of ash Part 1: General methods |
| ISO 16525-6:2014 | Adhesives Test methods for isotropic electrically conductive adhesives Part 6: Determination of pendulum-type shear impact |
| I.S. EN ISO 178:2010 | PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010) |
| I.S. EN 60903:2003 | LIVE WORKING - GLOVES OF INSULATING MATERIAL |
| UNI EN 15870 : 2009 | ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF BUTT JOINTS |
| BS ISO 18437-3 : 2005 | MECHANICAL VIBRATION AND SHOCK - CHARACTERIZATION OF THE DYNAMIC MECHANICAL PROPERTIES OF VISCO-ELASTIC MATERIALS - PART 3: CANTILEVER SHEAR BEAM METHOD |
| PREN 131-2 : DRAFT 2009 | LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING |
| I.S. EN ISO 22007-3:2012 | PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 3: TEMPERATURE WAVE ANALYSIS METHOD (ISO 22007-3:2008) |
| I.S. EN ISO 8062-1:2007 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 1: VOCABULARY |
| BIS IS 13360-2-2 : 2013 | PLASTICS - METHODS OF TESTING - PART 2: SAMPLING AND PREPARATION OF TEST SPECIMENS - SECTION 2: COMPRESSION MOULDED TEST SPECIMENS OF THERMOPLASTIC MATERIALS |
| BS EN ISO 10927:2011 | Plastics. Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) |
| ISO 19929:2017 | Plastics Determination of average molecular mass and mixture ratio of poly(ethylene glycol) and its derivatives by MALDI-TOF-MS |
| ISO 2557-1:1989 | Plastics Amorphous thermoplastics Preparation of test specimens with a specified maximum reversion Part 1: Bars |
| DIN EN ISO 16396-2:2017-07 | Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 16396-2:2017) |
| I.S. EN ISO 10364:2018 | STRUCTURAL ADHESIVES - DETERMINATION OF THE POT LIFE (WORKING LIFE) OF MULTI-COMPONENT ADHESIVES (ISO 10364:2015) |
| UNE-ISO 1268-11:2012 | Fibre-reinforced plastics. Methods of producing test plates. Part 11: Injection moulding of BMC and other long-fibre moulding compounds. Small plates |
| PREN 1852-1 : DRAFT 2016 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| ISO 9163:2005 | Textile glass — Rovings — Manufacture of test specimens and determination of tensile strength of impregnated rovings |
| ISO 2797:2017 | Textile glass — Rovings — Basis for a specification |
| ONORM EN ISO 15874-1 : 2013 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 1: GENERAL (ISO 15874-1:2013) |
| ISO 4437-1:2014 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 1: General |
| ISO 21340:2017 | Test methods for fibrous activated carbon |
| PREN 513 : DRAFT 2017 | PLASTICS - POLY(VINYL CHLORIDE) (PVC) BASED PROFILES - DETERMINATION OF THE RESISTANCE TO ARTIFICIAL WEATHERING |
| PREN ISO 306 : DRAFT 2012 | PLASTICS - THERMOPLASTIC MATERIALS - DETERMINATION OF VICAT SOFTENING TEMPERATURE (VST)(ISO/DIS 306:2012) |
| BS EN ISO 16014-5:2012 | Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography Method using light-scattering detection |
| ONORM EN ISO 1043-1 : 2012 AMD 1 2016 | PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMERS AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011) |
| NF EN ISO 10927 : 2011 | PLASTICS - DETERMINATION OF THE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMER SPECIES BY MATRIX-ASSISTED LASER DESORPTION/IONIZATION TIME-OF-FLIGHT MASS SPECTROMETRY (MALDI-TOF-MS) |
| S.R. CEN/TS 16010:2013 | PLASTICS - RECYCLED PLASTICS - SAMPLING PROCEDURES FOR TESTING PLASTICS WASTE AND RECYCLATES |
| I.S. EN ISO 22007-1:2017 | PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 1: GENERAL PRINCIPLES (ISO 22007-1:2017) |
| I.S. EN 60455-1:1999 | RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 1: DEFINITIONS AND GENERAL REQUIREMENTS |
| I.S. EN 17033:2018 | PLASTICS - BIODEGRADABLE MULCH FILMS FOR USE IN AGRICULTURE AND HORTICULTURE - REQUIREMENTS AND TEST METHODS |
| 18/30361790 DC : 0 | BS EN 17228 - PLASTICS - BIO-BASED POLYMERS, PLASTICS, AND PLASTIC PRODUCTS - TERMINOLOGY, CHARACTERISTICS AND COMMUNICATION |
| UNI EN ISO 178 : 2013 | PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES |
| EN 1519-1:1999 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system |
| EN ISO 10927:2011 | Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2011) |
| PREN 15348 : DRAFT 2013 | PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(ETHYLENE TEREPHTHALATE) (PET) RECYCLATES |
| ISO 16365-2:2014 | Plastics — Thermoplastic polyurethanes for moulding and extrusion — Part 2: Preparation of test specimens and determination of properties |
| BS ISO 15033:2007 | Plastics. Determination of caprolactam and its cyclic and linear oligomers by HPLC |
| ISO 16525-5:2014 | Adhesives Test methods for isotropic electrically conductive adhesives Part 5: Determination of shear fatigue |
| ISO 16525-2:2014 | Adhesives Test methods for isotropic electrically conductive adhesives Part 2: Determination of electrical characteristics for use in electronic assemblies |
| ASTM D 5575 : 2007 : R2013 | Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers |
| EN ISO 13000-1:2005 | Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation (ISO 13000-1:2005) |
| ASTM D 5575 : 2007 | Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers |
| I.S. EN ISO 20568-2:2017 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20568-2:2017) |
| ASTM D 8136 : 2017 | Standard Test Method for Determining Plastic Film Thickness and Thickness Variability Using a Non-Contact Capacitance Thickness Gauge |
| EN 1566-1:1998 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: Specifications for pipes, fittings and the system |
| BS EN 1329-1 : 2014 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| EN 1565-1:1998 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Styrene copolymer blends (SAN+PVC) - Part 1: Specifications for pipes, fittings and the system |
| EN 1852-1:2018 | Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system |
| PREN 17228 : DRAFT 2018 | PLASTICS - BIO-BASED POLYMERS, PLASTICS, AND PLASTIC PRODUCTS - TERMINOLOGY, CHARACTERISTICS AND COMMUNICATION |
| EN ISO 11357-3:2018 | Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization (ISO 11357-3:2018) |
| EN ISO 11357-6:2018 | Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2018) |
| EN ISO 15874-1:2013 | Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General (ISO 15874-1:2013) |
| ISO 4898:2010 | Rigid cellular plastics Thermal insulation products for buildings Specifications |
| ISO 8606:1990 | Plastics — Prepregs — Bulk moulding compound (BMC) and dough moulding compound (DMC) — Basis for a specification |
| IEC 60455-1:1998 | Resin based reactive compounds used for electrical insulation - Part 1: Definitions and general requirements |
| ISO 1268-11:2005 | Fibre-reinforced plastics — Methods of producing test plates — Part 11: Injection moulding of BMC and other long-fibre moulding compounds — Small plates |
| I.S. EN ISO 3451-1:2008 | PLASTICS - DETERMINATION OF ASH - PART 1: GENERAL METHODS |
| I.S. EN 15422:2008 | PRECAST CONCRETE PRODUCTS - SPECIFICATION OF GLASSFIBRES FOR REINFORCEMENT OF MORTARS AND CONCRETES |
| DIN EN ISO 1874-2:2013-03 | PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 1874-2:2012) |
| DIN EN ISO 3672-1 E : 2002 | PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 1: DESIGNATION SYSTEM |
| DIN EN 12654-2:1998-12 | Textile glass - Yarns - Part 2: Methods of test and general specifications; German version EN 12654-2:1998 |
| DIN EN 14408-1:2004-12 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 1: GENERAL |
| DIN EN 13417-3 E : 2002 | REINFORCEMENT - SPECIFICATIONS FOR WOVEN FABRICS - PART 3: SPECIFIC REQUIREMENTS |
| DIN EN 14758-1:2012-05 | Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittings and the system |
| DIN EN 15347:2008-02 | Plastics - Recycled Plastics - Characterisation of plastics wastes |
| DIN EN ISO 295:2004-05 | Plastics - Compression moulding of test specimens of thermosetting materials (ISO 295:2004) |
| DIN EN 15346 E : 2015 | PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES |
| DIN EN 15347 E : 2008 | PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF PLASTICS WASTES |
| DIN EN ISO 14530-2:2000-08 | Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14530-2:1999); German version EN ISO 14530-2:1999 |
| DIN EN 15344:2008-02 | Plastics - Recycled Plastics - Characterisation of Polyethylene (PE) recyclates |
| DIN EN ISO 899-2:2015-06 | PLASTICS - DETERMINATION OF CREEP BEHAVIOUR - PART 2: FLEXURAL CREEP BY THREE-POINT LOADING (ISO 899-2:2003 + AMD.1:2015) |
| DIN EN ISO 15023-1:2016-03 (Draft) | PLASTICS - POLY(VINYL ALCOHOL) (PVAL) MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 15023-1:2017) |
| DIN EN 15342:2008-02 | Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates |
| BS EN ISO 15605:2004 | Adhesives. Sampling |
| BS EN ISO 10082:2000 | Plastics. Phenolic resins. Classification and test methods |
| BS EN ISO 15023-1:2017 | Plastics. Poly(vinyl alcohol) (PVAL) materials Designation system and basis for specifications |
| BS EN ISO 1874-2:2012 | Plastics. Polyamide (PA) moulding and extrusion materials Preparation of test specimens and determination of properties |
| BS EN 13473-1:2001 | Reinforcement. Specifications for multi-axial multi-ply fabrics Designation |
| BS EN 14118-2:2003 | Reinforcement. Specifications for textile glass mats (chopped strand and continuous filament mats) Methods of test and general requirements |
| BS EN 13280:2001 | Specification for glass fibre reinforced cisterns of one-piece and sectional construction, for the storage, above ground, of cold water |
| ISO 17885:2015 | Plastics piping systems Mechanical fittings for pressure piping systems Specifications |
| BS EN ISO 14528-2:2000 | Plastics. Melamine-formaldehyde powder moulding compounds (MF-PMCs) Preparation of test specimens and determination of properties |
| BS EN 13417-3:2001 | Reinforcement. Specifications for woven fabrics Specific Requirements |
| IEC 61212-3-1:2013 | Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Round laminated rolled tubes |
| DIN EN 15343 E : 2008 | PLASTICS - RECYCLED PLASTICS - PLASTICS RECYCLING TRACEABILITY AND ASSESSMENT OF CONFORMITY AND RECYCLED CONTENT |
| ISO 1172:1996 | Textile-glass-reinforced plastics — Prepregs, moulding compounds and laminates — Determination of the textile-glass and mineral-filler content — Calcination methods |
| BS EN 13473-3:2001 | Reinforcement. Specifications for multi-axial multi-ply fabrics Specific requirements |
| BS EN 1401-1:2009 | Plastic piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U) Specifications for pipes, fittings and the system |
| BS EN ISO 308:1998 | Plastics. Phenolic moulding materials. Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state) |
| BS EN ISO 604:2003 | Plastics. Determination of compressive properties |
| UNE-EN ISO 12543-1:2011 | Glass in building - Laminated glass and laminated safety glass - Part 1: Definitions and description of component parts (ISO 12543-1:2011) |
| ONORM EN 12666-1 : 2011 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| I.S. EN 15346:2014 | PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES |
| I.S. EN ISO 11357-1:2016 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 1: GENERAL PRINCIPLES (ISO 11357-1:2016) |
| I.S. EN ISO 13000-2:2006 | PLASTICS - POLYTETRAFLUOROETHYLENE (PTFE) SEMI-FINISHED PRODUCTS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| I.S. EN 61212-3-1:2013 | INSULATING MATERIALS - INDUSTRIAL RIGID ROUND LAMINATED TUBES AND RODS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 1: ROUND LAMINATED ROLLED TUBES (IEC 61212-3-1:2013 (EQV)) |
| I.S. EN ISO 15023-1:2017 | PLASTICS - POLY(VINYL ALCOHOL) (PVAL) MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 15023-1:2017) |
| I.S. EN 131-2:2010 | LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING |
| I.S. EN 14052:2012 | HIGH PERFORMANCE INDUSTRIAL HELMETS |
| I.S. EN ISO 11339:2010 | ADHESIVES - T-PEEL TEST FOR FLEXIBLE-TO-FLEXIBLE BONDED ASSEMBLIES |
| DIN EN 14409-1:2004-12 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 1: GENERAL |
| I.S. EN 13245-1:2010 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 1: DESIGNATION OF PVC-U PROFILES |
| I.S. EN ISO 13000-1:2006 | PLASTICS - POLYTETRAFLUOROETHYLENE (PTFE) SEMI-FINISHED PRODUCTS - PART 1: REQUIREMENTS AND DESIGNATION |
| I.S. EN ISO 6401:2008 | PLASTICS - POLY(VINYL CHLORIDE) - DETERMINATION OF RESIDUAL VINYL CHLORIDE MONOMER - GAS-CHROMATOGRAPHIC METHOD |
| I.S. EN 61212-1:2006 | INSULATING MATERIALS - INDUSTRIAL RIGID ROUND LAMINATED TUBES AND RODS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 1: DEFINITIONS, DESIGNATIONS AND GENERAL REQUIREMENTS |
| DIN EN ISO 11339:2010-06 | Adhesives - T-peel test for flexible-to-flexible bonded assemblies (ISO 11339:2010) |
| DIN EN ISO 15874-1:2004-03 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) |
| I.S. EN ISO 11337:2010 | PLASTICS - POLYAMIDES - DETERMINATION OF EPSILON-CAPROLACTAM AND OMEGA-LAUROLACTAM BY GAS CHROMATOGRAPHY |
| CEN/TS 16010:2013 | PLASTICS - RECYCLED PLASTICS - SAMPLING PROCEDURES FOR TESTING PLASTICS WASTE AND RECYCLATES |
| ONORM EN 14758-1 : 2012 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE WITH MINERAL MODIFIERS (PP-MD) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| I.S. EN ISO 12543-1:2011 | GLASS IN BUILDING - LAMINATED GLASS AND LAMINATED SAFETY GLASS - PART 1: DEFINITIONS AND DESCRIPTION OF COMPONENT PARTS |
| I.S. EN 397:2012 | INDUSTRIAL SAFETY HELMETS |
| I.S. EN 61212-3-2:2013 | INSULATING MATERIALS - INDUSTRIAL RIGID ROUND LAMINATED TUBES AND RODS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 2: ROUND LAMINATED MOULDED TUBES (IEC 61212-3-2:2013 (EQV)) |
| I.S. EN ISO 8256:2004 | PLASTICS - DETERMINATION OF TENSILE-IMPACT STRENGTH |
| I.S. EN 60893-1:2004 | INSULATING MATERIALS - INDUSTRIAL RIGID LAMINATED SHEETS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 1: DEFINITIONS, DESIGNATIONS AND GENERAL REQUIREMENTS |
| I.S. EN 12201-1:2011 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 1: GENERAL |
| I.S. EN 61212-3-3:2006 | INSULATING MATERIALS - INDUSTRIAL RIGID ROUND LAMINATED TUBES AND RODS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 3: ROUND LAMINATED MOULDED RODS |
| I.S. EN 12200-1:2016 | PLASTICS RAINWATER PIPING SYSTEMS FOR ABOVE GROUND EXTERNAL USE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| I.S. EN 1555-1:2010-2015 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL |
| I.S. EN ISO 306:2013 | PLASTICS - THERMOPLASTIC MATERIALS - DETERMINATION OF VICAT SOFTENING TEMPERATURE (VST) (ISO 306:2013) |
| I.S. EN 12654-1:1999 | TEXTILE GLASS - YARNS - DESIGNATION |
| I.S. EN ISO 11469:2016 | PLASTICS - GENERIC IDENTIFICATION AND MARKING OF PLASTICS PRODUCTS (ISO 11469:2016) |
| I.S. EN 14758-1:2012 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE WITH MINERAL MODIFIERS (PP-MD) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| I.S. EN ISO 604:2003 | PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES |
| DIN EN ISO 877-1:2011-03 | Plastics - Methods of exposure to solar radiation - Part 1: General guidance (ISO 877-1:2009) |
| DIN EN 1453-1:2017-09 | PLASTICS PIPING SYSTEMS WITH STRUCTURED-WALL PIPES FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES AND THE SYSTEM |
| I.S. EN ISO 1874-2:2012 | PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 1874-2:2012) |
| I.S. EN 1453-1:2017 | PLASTICS PIPING SYSTEMS WITH STRUCTURED-WALL PIPES FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1 - SPECIFICATIONS FOR PIPES AND THE SYSTEM |
| I.S. EN ISO 2078:1995 | TEXTILE GLASS - YARNS - DESIGNATION (ISO 2078:1993) |
| I.S. EN ISO 899-2:2003 | PLASTICS - DETERMINATION OF CREEP BEHAVIOUR - PART 2: FLEXURAL CREEP BY THREE-POINT LOADING (ISO 899-2:2003) |
| EN ISO 11357-4:2014 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 4: DETERMINATION OF SPECIFIC HEAT CAPACITY (ISO 11357-4:2014) |
| I.S. EN 12666-1:2006 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| I.S. EN ISO 1043-3:2016 | PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 3: PLASTICIZERS |
| UNI CEN/TS 16010 : 2013 | PLASTICS - RECYCLED PLASTICS - SAMPLING PROCEDURES FOR TESTING PLASTICS WASTE AND RECYCLATES |
| I.S. EN ISO 8330:2014 | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - VOCABULARY (ISO 8330:2014) |
| UNI EN ISO 15874-1 : 2013 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 1: GENERAL |
| ONORM EN ISO 21003-1 : 2012 | MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 1: GENERAL (ISO 21003-1:2008) |
| VDE 0360-1 : 2006 | Varnishes used for electrical insulation Part 1: Definitions and general requirements (IEC 60464-1:1998 + A1:2006) |
| BS 3396-1:1991 | Woven glass fibre fabrics for plastics reinforcement Specification for loom-state fabrics |
| VDE 0355-1 : 1999 | RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - DEFINITIONS AND GENERAL REQUIREMENTS |
| BS 5350-C12:1994 | Methods of test for adhesives. Adhesively bonded joints: mechanical tests 180° peel test for flexible-to-flexible bonded assemblies (T-peel test) |
| VDE 0319-1 : 2007 COR 1 2014 | INSULATING MATERIALS - INDUSTRIAL RIGID ROUND LAMINATED TUBES AND RODS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 1: DEFINITIONS, DESIGNATIONS AND GENERAL REQUIREMENTS |
| DIN EN 60455-1 : 1999 | RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 1: DEFINITIONS AND GENERAL REQUIREMENTS |
| VDE 0340-1 : 1997 | SPECIFICATION FOR PRESSURE SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 1: GENERAL REQUIREMENTS |
| NBR ISO 16486-1 : 2013 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS WITH FUSION JOINTING AND MECHANICAL JOINTING - PART 1: GENERAL |
| BS 2782-7.733A(1996) : 1996 AMD 9928 | METHODS OF TESTING PLASTICS - RHEOLOGICAL PROPERTIES - DETERMINATION OF VISCOSITY NUMBER OF POLYAMIDES |
| VDE 0337-1 : 1998 | SPECIFICATION FOR POLYESTER FIBRE WOVEN TAPES - DEFINITIONS, DESIGNATION AND GENERAL REQUIREMENTS |
| DIN EN 61068-1 : 1998 | SPECIFICATION FOR POLYESTER FIBRE WOVEN TAPES - PART 1: DEFINITIONS, DESIGNATION AND GENERAL REQUIREMENTS |
| NBR 15708-5 : 2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - PULTRUDED SHAPES - PART 5: STRUCTURAL SHAPES |
| CEI EN 60903 : 2005 | LIVE WORKING - GLOVES OF INSULATING MATERIAL IMPIANTI |
| ISO 6237:2017 | Adhesives — Wood-to-wood adhesive bonds — Determination of shear strength by tensile loading |
| DIN EN ISO 22007-6:2015-05 | PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 6: COMPARATIVE METHOD FOR LOW THERMAL CONDUCTIVITIES USING A TEMPERATURE-MODULATION TECHNIQUE (ISO 22007-6:2014) |
| PREN 1401-1 : DRAFT 2018 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEMS |
| UNI EN ISO 11357-3 : 2013 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 3: DETERMINATION OF TEMPERATURE AND ENTHALPY OF MELTING AND CRYSTALLIZATION |
| 03/306100 DC : DRAFT APR 2003 | ISO 18437-3 - MECHANICAL VIBRATION AND SHOCK - CHARACTERIZATION OF THE DYNAMIC MECHANICAL PROPERTIES OF RESILIENT MATERIALS - PART 3: SINGLE CANTILEVER BEAM METHOD |
| 10/30212144 DC : 0 | BS EN 12201-1 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 1: GENERAL |
| 17/30364341 DC : 0 | BS EN 1519-1 - PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYETHYLENE (PE) - PART 1: REQUIREMENTS FOR PIPES, FITTINGS AND THE SYSTEM |
| CSA Z13329 : 2015 | NANOMATERIALS - PREPARATION OF SAFETY DATA SHEETS (SDSS) |
| BS ISO 6721-10:2015 | Plastics. Determination of dynamic mechanical properties Complex shear viscosity using a parallel-plate oscillatory rheometer |
| BS ISO 16620-1:2015 | Plastics. Biobased content General principles |
| BS EN ISO 22007-6:2015 | Plastics. Determination of thermal conductivity and thermal diffusivity Comparative method for low thermal conductivities using a temperature-modulation technique |
| 18/30363850 DC : DRAFT APR 2018 | BS EN ISO 3451-1 - PLASTICS - DETERMINATION OF ASH - PART 1: GENERAL METHODS |
| 15/30327642 DC : 0 | BS EN 13476-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 1: GENERAL REQUIREMENTS AND PERFORMANCE CHARACTERISTICS |
| ASTM D 1972 : 1997 : R2005 | Standard Practice for Generic Marking of Plastic Products (Withdrawn 2014) |
| PD CEN/TR 15438:2007 | Plastics piping systems. Guidance for coding of products and their intended uses |
| BS ISO 24538:2008 | Plastics. Homopolymer and copolymer resins of vinyl chloride. Determination of residual vinyl chloride monomer by gas-chromatographic analysis of dry powder |
| BS EN ISO 178 : 2010 | PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES |
| DIN EN ISO 16396-1:2015-05 | Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation system, marking of products and basis for specifications (ISO 16396-1:2015) |
| DIN EN ISO 11358-1 E : 2014 | PLASTICS - THERMOGRAVIMETRY (TG) OF POLYMERS - PART 1: GENERAL PRINCIPLES (ISO 11358-1:2014) |
| PD CEN/TS 16011:2013 | Plastics. Recycled plastics. Sample preparation |
| 12/30255878 DC : 0 | BS ISO 17885 - PLASTICS PIPING SYSTEMS - MECHANICAL FITTINGS FOR PRESSURE PIPING SYSTEMS - SPECIFICATIONS |
| BS ISO 21067-1:2016 | Packaging. Vocabulary General terms |
| 05/30130524 DC : DRAFT MAR 2005 | ISO 22621-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS FOR MAXIMUM OPERATING UP TO AND INCLUDING 2 MPA (20 BAR) - POLYAMIDE (PA) - PART 1: GENERAL |
| BS ISO 16525-1:2014 | Adhesives. Test methods for isotropic electrically conductive adhesives General test methods |
| 08/30177314 DC : DRAFT JAN 2008 | BS ISO 11357-3 - PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 3: DETERMINATION OF TEMPERATURE AND ENTHALPY OF MELTING AND CRYSTALLIZATION |
| 07/30147100 DC : 0 | ISO 18437-4 - MECHANICAL VIBRATION AND SHOCK - CHARACTERIZATION OF THE DYNAMIC MECHANICAL PROPERTIES OF VISCO-ELASTIC MATERIALS - PART 4: DYNAMIC STIFFNESS METHOD |
| BS EN ISO 1133-2:2011 | Plastics. Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics Method for materials sensitive to time-temperature history and/or moisture |
| 17/30357747 DC : DRAFT AUG 2017 | BS EN ISO 4007 - PERSONAL PROTECTIVE EQUIPMENT - EYE AND FACE PROTECTION - VOCABULARY |
| BS EN ISO 22007-2:2015 | Plastics. Determination of thermal conductivity and thermal diffusivity Transient plane heat source (hot disc) method |
| ISO 12817:2013 | Fibre-reinforced plastic composites — Determination of open-hole compression strength |
| BS ISO 7198:1998 | Cardiovascular implants. Tubular vascular prostheses |
| CEI EN 61112 : 2010 | LIVE WORKING - ELECTRICAL INSULATING BLANKETS |
| BS EN 16240:2013 | Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings. Requirements and test methods |
| BS ISO 25762 : 2009 | PLASTICS - GUIDANCE ON THE ASSESSMENT OF THE FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED POLYMER COMPOSITES |
| I.S. EN 1452-1:1999 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL |
| BS 3558-1:1997 | Glossary of rubber terms International terms |
| 17/30333280 DC : 0 | BS ISO 17422 - PLASTICS - ENVIRONMENTAL ASPECTS - GENERAL GUIDELINES FOR THEIR INCLUSION IN STANDARDS |
| 14/30295044 DC : 0 | BS ISO 19095-3 - ADHESIVES - EVALUATION OF THE ADHESION INTERFACE PERFORMANCE IN PLASTIC-METAL ASSEMBLIES - PART 3: TEST METHODS |
| 14/30283167 DC : 0 | BS ISO 18263-2 - PLASTICS - MIXTURES OF POLYPROPYLENE (PP) AND POLYETHYLENE (PE) RECYCLATE DERIVED FROM PP AND PE USED FOR FLEXIBLE AND RIGID CONSUMENR PACKAGING - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| 07/30161754 DC : 0 | BS ISO 15270 - PLASTICS - GUIDELINES FOR THE RECOVERY AND RECYCLING OF PLASTICS WASTE |
| 11/30211349 DC : 0 | BS ISO 13636 - PLASTICS - FILM AND SHEETING - NON-ORIENTED POLY(ETHYLENE TEREPHTHALATE) (PET) SHEETS |
| DIN EN ISO 11357-3:2013-04 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 3: DETERMINATION OF TEMPERATURE AND ENTHALPY OF MELTING AND CRYSTALLIZATION (ISO 11357-3:2011) |
| BS EN 1013 : 2012 | LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 306 E : 2014 | PLASTICS - THERMOPLASTIC MATERIALS - DETERMINATION OF VICAT SOFTENING TEMPERATURE (VST) (ISO 306:2013) |
| NF EN ISO 1452-1 : 2010 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL |
| DIN EN ISO 22007-2:2015-12 | Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method (ISO 22007-2:2015) |
| BS EN 16575:2014 | Bio-based products. Vocabulary |
| DIN EN 13245-2:2010-11 | Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 2: PVC-U profiles and PVC-UE profiles for internal and external wall and ceiling finishes (includes Corrigendum AC:2009) |
| UNE-EN ISO 11357-7:2016 | Plastics - Differential scanning calorimetry (DSC) - Part 7: Determination of crystallization kinetics (ISO 11357-7:2015) |
| 08/30185535 DC : DRAFT JULY 2008 | BS EN ISO 1452-1 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC U) - PART 1: GENERAL |
| UNE-EN 15348:2015 | Plastics - Recycled plastics - Characterization of poly(ethylene terephthalate) (PET) recyclates |
| UNI EN 15347 : 2008 | PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF PLASTICS WASTES |
| 07/30155372 DC : 0 | BS ISO 877-1 - PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE |
| PD CEN/TR 16953:2017 | Medical gloves for single use. Guidance for selection |
| 09/30183439 DC : 0 | BS EN ISO 1133-2 - PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS - PART 2: METHOD FOR MATERIALS SENSITIVE TO TIME-TEMPERATURE HISTORY AND/OR MOISTURE |
| BS ISO 21340:2017 | Test methods for fibrous activated carbon |
| BS EN 61112:2009 | Live working. Electrical insulating blankets |
| DIN EN 16575 E : 2014 | BIO-BASED PRODUCTS - VOCABULARY |
| 13/30240167 DC : 0 | BS ISO 16365-2 - PLASTICS - THERMOPLASTIC POLYURETHANES FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| UNI EN ISO 11358-1 : 2014 | PLASTICS - THERMOGRAVIMETRY (TG) OF POLYMERS - PART 1: GENERAL PRINCIPLES |
| BS EN 60464-1:1999 | Varnishes used for electrical insulation Definitions and general requirements |
| 08/30194094 DC : 0 | BS EN 13245-3 - PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES |
| 12/30252886 DC | BS ISO 10364. Structural adhesives. Determination of the pot life (working life) of multi-component adhesives |
| BS ISO 16014-2:2012 | Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography Universal calibration method |
| DIN EN 15701:2015-02 (Draft) | PLASTICS - THERMOPLASTIC JACKETS FOR INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - REQUIREMENTS AND TEST METHODS |
| BS ISO 18263-2:2015 | Plastics. Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging Preparation of test specimens and determination of properties |
| 05/30141301 DC : DRAFT NOV 2005 | ISO 20393 - RIGID CELLULAR PLASTICS - DETERMINATION OF LONG-TERM WATER ABSORPTION BY DIFFUSION |
| BS EN ISO 11357-4:2014 | Plastics. Differential scanning calorimetry (DSC) Determination of specific heat capacity |
| BS ISO 17885:2015 | Plastics piping systems. Mechanical fittings for pressure piping systems. Specifications |
| 10/30211408 DC : 0 | BS ISO 2561 - PLASTICS - DETERMINATION OF RESIDUAL STYRENE MONOMER IN POLYSTYRENE (PS) AND IMPACT-RESISTANT POLYSTYRENE (PS-I) BY GAS CHROMATOGRAPHY |
| BS ISO 16014-1:2012 | Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography General principles |
| BS ISO 16525-2:2014 | Adhesives. Test methods for isotropic electrically conductive adhesives Determination of electrical characteristics for use in electronic assemblies |
| ISO 20965:2005 | Plastics Determination of the transient extensional viscosity of polymer melts |
| 14/30295038 DC : 0 | BS ISO 19095-1 - ADHESIVES - EVALUATION OF THE ADHESION INTERFACE PERFORMANCE IN PLASTIC-METAL ASSEMBLIES - PART 1: GUIDELINES FOR THE APPROACH |
| PD CEN ISO/TR 22007-5:2014 | Plastics. Determination of thermal conductivity and thermal diffusivity Results of interlaboratory testing of poly(methyl methacrylate) samples |
| BS EN ISO 16396-1:2015 | Plastics. Polyamide (PA) moulding and extrusion materials Designation system, marking of products and basis for specifications |
| 11/30237779 DC : DRAFT MAR 2011 | BS ISO 18437-1 - MECHANICAL VIBRATION AND SHOCK - CHARACTERIZATION OF THE DYNAMIC MECHANICAL PROPERTIES OF VISCO-ELASTIC MATERIALS - PART 1: PRINCIPLES AND GUIDELINES |
| BS ISO 2559:2011 | Textile glass. Mats (made from chopped or continuous strands). Designation and basis for specifications |
| 01/121538 DC : DRAFT APRIL 2001 | BS EN ISO 899-1 PLASTICS - DETERMINATION OF CREEP BEHAVIOUR - PART 1: TENSILE CREEP |
| BS ISO 1268-11:2005 | Fibre-reinforced plastics. Methods of producing test plates Injection moulding of BMC and other long-fibre moulding compounds. Small plates |
| BS EN ISO 8062-1:2007 | Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts Vocabulary |
| 08/30191143 DC : 0 | BS EN 1555-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL |
| 03/102186 DC : DRAFT AUG 2003 | EN 14758-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE WITH MINERAL MODIFIERS (PP-M) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| 06/30146370 DC : DRAFT SEP 2006 | ISO 15439-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 4 BAR - POLYAMIDE (PA) - PART 1: GENERAL |
| 09/30191924 DC : 0 | BS ISO 16014-5 - PLASTICS - DETERMINATION OF AVERAGE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY - PART 5: LIGHT-SCATTERING METHOD |
| BS ISO 10724-1 : 1998 AMD 13328 | PLASTICS - INJECTION MOULDING OF TEST SPECIMENS OF THERMOSETTING POWDER MOULDING COMPOUNDS (PMCS) - GENERAL PRINCIPLES AND MOULDING OF MULTIPURPOSE TEST SPECIMENS |
| 04/30112206 DC : DRAFT APR 2004 | BS ISO 22314 - PLASTICS - GLASS-FIBRE-REINFORCED PRODUCTS - DETERMINATION OF FIBRE LENGTH |
| UNE-EN ISO 11358-1:2015 | Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles (ISO 11358-1:2014) |
| PREN 1453-1 : DRAFT 2014 | PLASTICS PIPING SYSTEMS WITH STRUCTURED-WALL PIPES FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES AND THE SYSTEM |
| 10/30196253 DC : 0 | BS ISO 14910-1 - PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
| UNI EN 13245-2 : 2009 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 2: PVC-U PROFILES AND PVC-UE PROFILES FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES |
| 11/30238648 DC : DRAFT FEB 2011 | BS EN 16240 - LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| BS ISO 11359-1:2014 | Plastics. Thermomechanical analysis (TMA) General principles |
| BS ISO 4437-1:2014 | Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) General |
| BS ISO 22314:2006 | Plastics. Glass-fibre-reinforced products. Determination of fibre length |
| UNE-ISO 4901:2014 | Reinforced plastics based on unsaturated-polyester resins. Determination of the residual styrene monomer content, as well as the content of other volatile aromatic hydrocarbons, by gas chromatography |
| UNE-EN ISO 22007-6:2015 | Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique (ISO 22007-6:2014) |
| UNE-ISO 1268-8:2012 | Fibre-reinforced plastics. Methods of producing test plates. Part 8: Compression moulding of SMC and BMC |
| UNI EN 1329-1 : 2014 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| DIN EN ISO 1452-1:2010-04 | Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: General (ISO 1452-1:2009) |
| DIN EN 131-6:2015-05 | LADDERS - PART 6: TELESCOPIC LADDERS |
| BS ISO 2535 : 1997 AMD 10259 | PLASTICS - UNSATURATED POLYESTER RESINS - MEASUREMENT OF GEL TIME AT 25 DEG C |
| DIN EN 16153:2015-05 | LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| DIN ISO 16486-1 E : 2015 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS WITH FUSION JOINTING AND MECHANICAL JOINTING - PART 1: GENERAL (ISO 16486-1:2012 + AMD 1:2014) |
| I.S. EN 15701:2016 | PLASTICS - THERMOPLASTIC JACKETS FOR INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - REQUIREMENTS AND TEST METHODS |
| EN 1451-1:2017 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system |
| DIN EN ISO 1183-1:2013-04 | PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 1: IMMERSION METHOD, LIQUID PYKNOMETER METHOD AND TITRATION METHOD (ISO 1183-1:2012) |
| ASTM D 6988 : 2013 : REDLINE | Standard Guide for Determination of Thickness of Plastic Film Test Specimens |
| I.S. EN ISO 877-1:2010 | PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE |
| EN 1455-1:1999 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1: Requirements for pipes, fittings and the system |
| UNI EN 15342 : 2008 | PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLYSTYRENE (PS) RECYCLATES |
| ONORM EN ISO 10927 : 2011 | PLASTICS - DETERMINATION OF THE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMER SPECIES BY MATRIX-ASSISTED LASER DESORPTION/IONIZATION TIME-OF-FLIGHT MASS SPECTROMETRY (MALDI-TOF-MS) |
| I.S. EN 131-6:2015 | LADDERS - PART 6: TELESCOPIC LADDERS |
| UNI EN 16575 : 2014 | BIO-BASED PRODUCTS - VOCABULARY |
| BS ISO 18437-2 : 2005 | MECHANICAL VIBRATION AND SHOCK - CHARACTERIZATION OF THE DYNAMIC MECHANICAL PROPERTIES OF VISCO-ELASTIC MATERIALS - PART 2: RESONANCE METHOD |
| I.S. EN 1451-1:2017 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| BS EN 1852-1:2018 | Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP) Specifications for pipes, fittings and the system |
| I.S. EN ISO 10927:2011 | PLASTICS - DETERMINATION OF THE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMER SPECIES BY MATRIX-ASSISTED LASER DESORPTION/IONIZATION TIME-OF-FLIGHT MASS SPECTROMETRY (MALDI-TOF-MS) |
| ISO 15876-1:2017 | Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 1: General |
| I.S. EN 15870:2009 | ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF BUTT JOINTS |
| ISO 11357-3:2018 | Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization |
| ISO 15033:2007 | Plastics Determination of caprolactam and its cyclic and linear oligomers by HPLC |
| I.S. EN 16245-2:2013 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: SPECIFIC REQUIREMENTS FOR RESIN, CURING SYSTEMS, ADDITIVES AND MODIFIERS |
| I.S. EN ISO 16014-5:2012 | PLASTICS - DETERMINATION OF AVERAGE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY - PART 5: METHOD USING LIGHT-SCATTERING DETECTION (ISO 16014-5:2012) |
| BS EN 1451-1:2017 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP) Specifications for pipes, fittings and the system |
| UNI EN ISO 10927 : 2011 | PLASTICS - DETERMINATION OF THE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMER SPECIES BY MATRIX-ASSISTED LASER DESORPTION/IONIZATION TIME-OF-FLIGHT MASS SPECTROMETRY (MALDITOF-MS) |
| EN ISO 1043-1:2011/A1:2016 | PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMER AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011/AMD 1:2016) |
| DIN EN ISO 15877-1:2011-03 | Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: General (ISO 15877-1:2009 + AMD 1:2010) |
| EN ISO 6721-1:2011 | Plastics - Determination of dynamic mechanical properties - Part 1: General principles (ISO 6721-1:2011) |
| CEN/TR 16953:2017 | Medical gloves for single use - Guidance for selection |
| UNI EN ISO 4007 : 2012 | PERSONAL PROTECTIVE EQUIPMENT - EYE AND FACE PROTECTION - VOCABULARY |
| I.S. EN ISO 11357-4:2014 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 4: DETERMINATION OF SPECIFIC HEAT CAPACITY (ISO 11357-4:2014) |
| I.S. EN 13245-3:2010 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES |
| EN 17098-2:2018 | Plastics - Barrier films for agricultural and horticultural soil disinfection by fumigation - Part 2: Method for film permeability determination using a static technique |
| EN 17098-1:2018 | Plastics - Barrier films for agricultural and horticultural soil disinfection by fumigation - Part 1: Specifications for barrier films |
| PRCEN/TS 16861 : DRAFT 2014 | PLASTICS - RECYCLED PLASTICS - DETERMINATION OF SELECTED MARKER COMPOUNDS IN FOOD GRADE RECYCLED POLYETHYLENE TEREPHTHALATE (PET) |
| UNI EN 13245-3 : 2010 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES |
| ASTM D 4092 : 2007 : R2013 | Standard Terminology for Plastics: Dynamic Mechanical Properties |
| EN ISO 1183-1:2012 | Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012) |
| EN 60454-1:1994 | Specifications for pressure-sensitive adhesive tapes for electrical purposes - Part 1: General requirements |
| NF ISO 11357-6 : 2011 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 6: DETERMINATION OF OXIDATION INDUCTION TIME (ISOTHERMAL OIT) AND OXIDATION INDUCTION TEMPERATURE (DYNAMIC OIT) |
| EN 131-6:2015 | Ladders - Part 6: Telescopic ladders |
| ISO 21067-1:2016 | Packaging Vocabulary Part 1: General terms |
| EN ISO 10364:2018 | Structural adhesives - Determination of the pot life (working life) of multi-component adhesives (ISO 10364:2015) |
| EN ISO 22007-1:2017 | Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO 22007-1:2017) |
| ISO 16014-4:2012 | Plastics Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography Part 4: High-temperature method |
| ISO 8605:2001 | Textile-glass-reinforced plastics — Sheet moulding compound (SMC) — Basis for a specification |
| ISO 17771:2003 | Plastics — Thermoset moulding compounds — Determination of the degree of fibre wetting in SMC |
| EN 17033:2018 | Plastics - Biodegradable mulch films for use in agriculture and horticulture - Requirements and test methods |
| IEC 60984:2014 | Live working - Electrical insulating sleeves |
| I.S. EN ISO 15750-3:2008 | PACKAGING - STEEL DRUMS - PART 3: INSERTED FLANGE-TYPE CLOSURE SYSTEMS |
| ISO 15166-1:1998 | Adhesives Methods of preparing bulk specimens Part 1: Two-part systems |
| IEC 60903:2014 | Live working - Electrical insulating gloves |
| ISO 20393:2007 | Thermal-insulating materials Determination of long-term water absorption by diffusion |
| IEC 60454-1:1992 | Specifications for pressure-sensitive adhesive tapes for electrical purposes - Part 1: General requirements |
| ISO 17221:2014 | Plastics — Determination of image clarity (degree of sharpness of reflected or transmitted image) |
| I.S. EN 60464-1:1999 | VARNISHES USED FOR ELECTRICAL INSULATION - PART 1: DEFINITIONS AND GENERAL REQUIREMENTS |
| DIN EN 12654-3:1998-12 | Textile glass - Yarns - Part 3: General requirements for general applications; German version EN 12654-3:1998 |
| DIN EN 1555-1:2010-12 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General |
| DIN EN ISO 295 E : 2004 | PLASTICS - COMPRESSION MOULDING TEST SPECIMENS OF THERMOSETTING MATERIALS |
| DIN EN ISO 9163 E : 2005 | TEXTILE GLASS - ROVINGS - MANUFACTURE OF TEST SPECIMENS AND DETERMINATION OF TENSILE STRENGTH OF IMPREGNATED ROVINGS |
| DIN EN ISO 8256:2005-05 | Plastics - Determination of tensile-impact strength (ISO 8256:2004); German version EN ISO 8256:2004 |
| DIN EN 14447 E : 2005 | FIBRE REINFORCED PLASTICS - GLASS MAT REINFORCED THERMOPLASTICS (GMT) - DETERMINATION OF FLOWABILITY AND SOLIDIFICATION |
| DIN EN 12666-1:2011-11 | Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system (includes Amendment A1:2011) |
| DIN EN 14649 E : 2005 | PRECAST CONCRETE PRODUCTS - TEST METHOD FOR STRENGTH RETENTION OF GLASS FIBRES IN CEMENT AND CONCRETE (SIC TEST) |
| DIN EN 15343:2008-02 | Plastics - Recycled Plastics - Plastics recycling traceability and assessment of conformity and recycled content |
| DIN EN 15346:2015-01 | PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES |
| ISO 14526-1:1999 | Plastics Phenolic powder moulding compounds (PF-PMCs) Part 1: Designation system and basis for specifications |
| UNE-EN ISO 306:2015 | Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2013) |
| BS EN 13417-1:2001 | Reinforcement. Specifications for woven fabrics Designation |
| UNE-EN 1453-1:2017 | Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes and the system |
| BS EN 13417-2:2001 | Reinforcement. Specifications for woven fabrics Methods of test and general requirements |
| BS EN 13121-1:2003 | GRP tanks and vessels for use above ground Raw materials. Specification conditions and acceptance conditions |
| UNE-EN ISO 1043-3:2017 | Plastics - Symbols and abbreviated terms - Part 3: Plasticizers (ISO 1043-3:2016) |
| UNE-EN 14758-1:2012 | Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittings and the system |
| BS EN 397 : 2012 | INDUSTRIAL SAFETY HELMETS |
| BS EN 12201-1:2011 | Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE) General |
| ISO 15023-1:2017 | Plastics — Poly(vinyl alcohol) (PVAL) materials — Part 1: Designation system and basis for specifications |
| BS EN ISO 8256:2004 | Plastics. Determination of tensile-impact strength |
| BS EN ISO 13000-1:2005 | Plastics. Polytetrafluoroethylene (PTFE) semi-finished products Requirements and designation |
| ISO 21003-1:2008 | Multilayer piping systems for hot and cold water installations inside buildings — Part 1: General |
| BS EN ISO 8330:2014 | Rubber and plastics hoses and hose assemblies. Vocabulary |
| BS EN 13706-2:2002 | Reinforced plastics composites. Specifications for pultruded profiles Method of test and general requirements |
| ISO 13000-1:2005 | Plastics Polytetrafluoroethylene (PTFE) semi-finished products Part 1: Requirements and designation |
| BS EN 13421:2006 | Plastics. Thermoset moulding compounds. Composites and reinforcement fibres. Preparation of specimens for determining the anisotropy of the properties of compression moulding composites |
| BS EN ISO 14526-3:2000 | Plastics. Phenolic powder moulding compounds (PF-PMCs) Requirements for selected moulding compounds |
| ISO 1043-3:2016 | Plastics Symbols and abbreviated terms Part 3: Plasticizers |
| DIN EN 15344 E : 2008 | PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYETHYLENE (PE) RECYCLATES |
| ISO 15252-3:1999 | Plastics Epoxy powder moulding compounds (EP-PMCs) Part 3: Requirements for selected moulding compounds |
| UNE-EN ISO 1874-2:2013 | Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1874-2:2012) |
| I.S. EN 12006-2:1998 | NON ACTIVE SURGICAL IMPLANTS - PARTICULAR REQUIREMENTS FOR CARDIAC AND VASCULAR IMPLANTS - PART 2: VASCULAR PROSTHESES INCLUDING CARDIAC VALVE CONDUITS |
| EN ISO 14527-1 : 1999 | Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) - Part 1: Designation system and basis for specifications (ISO 14527-1:1999) |
| EN ISO 12086-1:2006/AC:2007 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
| EN ISO 15750-3:2008 | Packaging - Steel drums - Part 3: Inserted flange-type closure systems (ISO 15750-3:2002) |
| EN 14118-3:2003 | Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 3: Specific requirements |
| EN 14408-1:2004 | Plastics piping systems for renovation of underground gas supply networks - Part 1: General |
| EN 16245-2:2013 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers |
| EN 14118-1:2003 | Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 1: Designation |
| EN 16240:2013 | Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods |
| UNI EN ISO 1874-2 : 2013 | PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| UNI EN 13245-1 : 2010 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 1: DESIGNATION OF PVC-U PROFILES |
| UNI EN 16245-2 : 2013 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: SPECIFIC REQUIREMENTS FOR RESIN, CURING SYSTEMS, ADDITIVES AND MODIFIERS |
| UNI EN ISO 8330 : 2014 | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - VOCABULARY |
| ONORM EN ISO 11358-1 : 2014 | PLASTICS - THERMOGRAVIMETRY (TG) OF POLYMERS - PART 1: GENERAL PRINCIPLES (ISO 11358-1:2014) |
| UNI EN 12006-2 : 2009 | NON ACTIVE SURGICAL IMPLANTS - PARTICULAR REQUIREMENTS FOR CARDIAC AND VASCULAR IMPLANTS - PART 2: VASCULAR PROSTHESES INCLUDING CARDIAC VALVE CONDUITS |
| UNI EN 12201-1 : 2012 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 1: GENERAL |
| EN ISO 3672-1:2001 | Plastics - Unsaturated-polyester resins (UP-R) - Part 1: Designation system (ISO 3672-1:2000) |
| UNI EN 12666-1 : 2011 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| UNI EN 14052 : 2013 | HIGH PERFORMANCE INDUSTRIAL HELMETS |
| UNI EN ISO 11337 : 2011 | PLASTICS - POLYAMIDES - DETERMINATION OF [EPSILON]-CAPROLACTAM AND [OMEGA]-LAUROLACTAME BY GAS CHROMATOGRAPHY |
| UNI EN ISO 6401 : 2009 | PLASTICS - POLY(VINYL CHLORIDE) - DETERMINATION OF RESIDUAL VINYL CHLORIDE MONOMER-GAS-CHROMATOGRAPHIC METHOD |
| EN 14020-3:2002 | Reinforcements - Specification for textile glass rovings - Part 3: Specific requirements |
| UNI EN ISO 604 : 2008 | PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES |
| ONORM EN ISO 11357-7 : 2015 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 7: DETERMINATION OF CRYSTALLIZATION KINETICS (ISO 11357-7:2015) |
| UNI EN ISO 306 : 2014 | PLASTICS - THERMOPLASTIC MATERIALS - DETERMINATION OF VICAT SOFTENING TEMPERATURE (VST) |
| UNI EN 1401-1 : 2009 | PLASTICS PIPING SYSTEMS FOR NON- PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| UNI EN ISO 12086-2 : 2006 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| UNI EN 14758-1 : 2012 | PLASTICS PIPING SYSTEMS FOR NON- PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE WITH MINERAL MODIFIERS (PP-MD) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| UNE-ISO 2561:2014 | Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography |
| ISO 22314:2006 | Plastics — Glass-fibre-reinforced products — Determination of fibre length |
| DIN EN 15857 E : 2010 | NON-DESTRUCTIVE TESTING - ACOUSTIC EMISSION - TESTING OF FIBRE-REINFORCED POLYMERS - SPECIFIC METHODOLOGY AND GENERAL EVALUATION CRITERIA |
| DIN EN 16240:2014-03 | LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| S.R. CEN/TR 16953:2017 | MEDICAL GLOVES FOR SINGLE USE - GUIDANCE FOR SELECTION |
| UNI EN ISO 1183-1 : 2013 | PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 1: IMMERSION METHOD, LIQUID PYKNOMETER METHOD AND TITRATION METHOD |
| ISO 18606:2013 | Packaging and the environment — Organic recycling |
| BS ISO 19095-1:2015 | Plastics. Evaluation of the adhesion interface performance in plastic-metal assemblies Guidelines for the approach |
| DIN EN ISO 22007-3:2012-04 | Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method (ISO 22007-3:2008) |
| 17/30341503 DC : DRAFT APR 2017 | BS ISO 15033 - PLASTICS - DETERMINATION OF CAPROLACTAM AND ITS CYCLIC AND LINEAR OLIGOMERS BY HPLC |
| ISO 18437-6:2017 | Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 6: Time-temperature superposition |
| ISO 178:2010 | Plastics Determination of flexural properties |
| UNE-EN ISO 11357-6:2013 | Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2008) |
| DIN EN ISO 11357-4:2014-10 | Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2014) |
| UNI EN ISO 8062-1 : 2009 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 1: VOCABULARY |
| 13/30212494 DC : 0 | BS EN ISO 15494 - PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE) AND POLYPROPYLENE (PP) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM - METRIC SERIES |
| BS EN ISO 25762:2012 | Plastics. Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites |
| DD ENV 61112:2002 | Blankets of insulating material for electrical purposes |
| BS ISO 17771:2003 | Plastics. Thermoset moulding compounds. Determination of the degree of fibre wetting in SMC |
| 09/30206298 DC : 0 | BS EN 16011 - PLASTICS - RECYCLED PLASTICS - SAMPLE PREPARATION |
| 11/30248330 DC : 0 | BS ISO 17467-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS JOINTED BY SOLVENT CEMENT - PART 1: GENERAL |
| UNI EN 15344 : 2008 | PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYETHYLENE (PE) RECYCLATES |
| BS EN ISO 11358-1:2014 | Plastics. Thermogravimetry (TG) of polymers General principles |
| BS EN 61111 : 2010 | LIVE WORKING - ELECTRICAL INSULATING MATTING |
| ISO 21004:2006 | Plastics piping systems Multilayer pipes and their joints, based on thermoplastics, for water supply |
| I.S. EN ISO 15605:2004 | ADHESIVES - SAMPLING |
| PD ISO/TR 18196:2016 | Nanotechnologies. Measurement technique matrix for the characterization of nano-objects |
| ISO 4901:2011 | Reinforced plastics based on unsaturated-polyester resins Determination of the residual styrene monomer content, as well as the content of other volatile aromatic hydrocarbons, by gas chromatography |
| 10/30215996 DC : 0 | BS EN 61212-3-1 - INSULATING MATERIALS - INDUSTRIAL RIGID ROUND LAMINATED TUBES AND RODS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 1: ROUND LAMINATED ROLLED TUBES |
| BS ISO 18437-5:2011 | Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials Poisson ratio based on comparison between measurements and finite element analysis |
| BS EN ISO 15876-1:2017 | Plastics piping systems for hot and cold water installations. Polybutene (PB) General |
| I.S. EN ISO 1452-1:2009 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL |
| BS ISO 19929:2017 | Plastics. Determination of average molecular mass and mixture ratio of poly(ethylene glycol) and its derivatives by MALDI-TOF-MS |
| DD CEN/TS 14758-2:2007 | Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene with mineral modifier(s) (PP-MD) Guidance for the assessment of conformity |
| DIN EN 1013:2015-03 | LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 1329-1:2014 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| DIN EN ISO 11357-7 E : 2015 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 7: DETERMINATION OF CRYSTALLIZATION KINETICS (ISO 113577:2015) |
| 09/30194950 DC : 0 | BS ISO 11337 - PLASTICS - POLYAMIDES - DETERMINATION OF E-CAPROLACTAM AND W-LAUROLACTAM BY GAS CHROMATOGRAPHY |
| 06/30151164 DC : 0 | BS EN ISO 15877-1 - PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 1: GENERAL |
| PREN ISO 15494 : DRAFT 2013 | PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE) AND POLYPROPYLENE (PP) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM - METRIC SERIES (ISO/DIS 15494:2013) |
| BS EN ISO 1452-1:2009 | Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC U) General |
| 13/30259881 DC : 0 | BS ISO 22007-6 - PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 6: COMPARATIVE METHOD FOR LOW THERMAL CONDUCTIVITIES USING A TEMPERATURE-MODULATION TECHNIQUE |
| SAE AMS 3970/1 : 2011 | CARBON FIBER FABRIC REPAIR PREPREG, 120 DEGREES C (250 DEGREES F) VACUUM CURING - PART 1 - GENERAL REQUIREMENTS |
| UNI EN 15422 : 2008 | PRECAST CONCRETE PRODUCTS - SPECIFICATION OF GLASS-FIBRES FOR REINFORCEMENT OF MORTARS AND CONCRETES |
| 15/30302735 DC : 0 | BS EN ISO 11469 - PLASTICS - GENERIC IDENTIFICATION AND MARKING OF PLASTICS PRODUCTS |
| PREN 131-6 : DRAFT 2017 | LADDERS - PART 6: TELESCOPIC LADDERS |
| BS EN 13245-3:2010 | Plastics. Unplasticized poly(vinyl chloride) (PVCU) profiles for building applications Designation of PVC-UE profiles |
| I.S. EN 14408-1:2004 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 1: GENERAL |
| 03/305847 DC : DRAFT APR 2003 | ISO 18437-2 - MECHANICAL VIBRATION AND SHOCK - CHARACTERISATION OF THE DYNAMIC MECHANICAL PROPERTIES OF RESILIENT MATERIALS - PART 2: RESONANCE METHOD |
| 14/30304003 DC : 0 | BS EN 62899-1 ED.1 - PRINTED ELECTRONICS - MATERIALS - PART 1: SUBSTRATES |
| BS EN 15345:2007 | Plastics. Recycled plastics. Characterization of polypropylene (PP) recyclates |
| UNE-EN ISO 11357-4:2014 | Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2014) |
| 04/30095069 DC : 0 | BS EN 443 - FIREFIGHTERS HELMETS |
| BS ISO 1268-1:2001 | Fibre-reinforced plastics. Methods of producing test plates General conditions |
| 08/30170590 DC : DRAFT JULY 2008 | BS EN ISO 12543-1 - GLASS IN BUILDING - LAMINATED GLASS AND LAMINATED SAFETY GLASS - PART 1: DEFINITIONS AND DESCRIPTION OF COMPONENT PARTS |
| 08/30193485 DC : 0 | BS ISO 17212 - STRUCTURAL ADHESIVES- GUIDELINES FOR THE SURFACE PREPARATION OF METALS AND PLASTICS PRIOR TO ADHESIVE BONDING |
| BS EN 15870:2009 | Adhesives. Determination of tensile strength of butt joints |
| 18/30367544 DC : DRAFT APR 2018 | BS ISO 21257 - PLASTICS - POLYMER POLYOLS FOR USE IN THE PRODUCTION OF POLYURETHANE - DETERMINATION OF THE RESIDUAL ACRYLONITRILE AND STYRENE MONOMER CONTENT BY GAS CHROMATOGRAPHY |
| BS EN ISO 8257-1:2006 | Plastics. Poly(methyl methacrylate)(PMMA) moulding and extrusion materials Designation system and basis for specifications |
| BS EN 16245-2:2013 | Fibre-reinforced plastic composites. Declaration of raw material characteristics Specific requirements for resin, curing systems, additives and modifiers |
| BS EN ISO 22007-1:2017 | Plastics. Determination of thermal conductivity and thermal diffusivity General principles |
| BS ISO 12000:2014 | Plastics/rubber. Polymer dispersions and rubber lattices (natural and synthetic). Definitions and review of test methods |
| BS EN ISO 11357-3:2013 | Plastics. Differential scanning calorimetry (DSC) Determination of temperature and enthalpy of melting and crystallization |
| 04/30091867 DC : DRAFT FEB 2004 | BS EN ISO 12086-1 - PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
| BS EN 15857:2010 | Non-destructive testing. Acoustic emission. Testing of fibre-reinforced polymers. Specific methodology and general evaluation criteria |
| 16/30330542 DC : 0 | BS EN ISO 22007-1 - PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 1: GENERAL PRINCIPLES |
| 14/30268127 DC : 0 | BS EN ISO 11357-7 - PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 7: DETERMINATION OF CRYSTALLIZATION KINETICS |
| BS ISO 22007-6 : 2014 | PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 6: COMPARATIVE METHOD FOR LOW THERMAL CONDUCTIVITIES USING A TEMPERATURE-MODULATION TECHNIQUE |
| 17/30348289 DC : 0 | BS EN 17098-2 - PLASTICS - BARRIER FILMS FOR AGRICULTURAL AND HORTICULTURAL SOIL DISINFECTION BY FUMIGATION - PART 2: METHOD FOR FILM PERMEABILITY DETERMINATION USING A STATIC TECHNIQUE |
| BS EN ISO 20568-1:2017 | Plastics. Fluoropolymer dispersions and moulding and extrusion materials Designation system and basis for specifications |
| DIN EN ISO 11358-1:2014-10 | Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles (ISO 11358-1:2014) |
| BS ISO 11359-3:2002 | Plastics. Thermomechanical analysis (TMA) Determination of penetration temperature |
| BS ISO 9163 : 1996 AMD 10351 | TEXTILE GLASS - ROVINGS - MANUFACTURE OF TEST SPECIMENS AND DETERMINATION OF TENSILE STRENGTH OF IMPREGNATED ROVINGS |
| ISO 13895:1996 | Adhesives Guidelines for the surface preparation of plastics |
| 15/30321222 DC : 0 | BS EN ISO 20568-1 - PLASTICS - FLUOROPOLYMER DISPERSION AND MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
| UNI EN ISO 1452-1 : 2010 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL |
| BS 7746:1994 | Generic identification and marking of plastics products |
| 15/30321226 DC : 0 | BS EN ISO 20568-2 - PLASTICS - FLUOROPOLYMER DISPERSION AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| DIN EN 15345 E : 2008 | PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYPROPYLENE (PP) RECYCLATES |
| BS EN 50237:2000 | Gloves and mitts with mechanical protection for electrical purposes |
| BS IEC 61942:1997 | Live working. Gloves and mitts with mechanical protection |
| UNE-ISO 1268-1:2012 | Fibre-reinforced plastics -- Methods of producing test plates -- Part 1: General conditions |
| UNE-EN 15857:2010 | Non-destructive testing - Acoustic emission - Testing of fibre-reinforced polymers - Specific methodology and general evaluation criteria |
| UNE-EN ISO 11357-2:2015 | Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and glass transition step height (ISO 11357-2:2013) |
| 18/30344274 DC : DRAFT APR 2018 | BS ISO 21475 - PLASTICS - METHODS OF EXPOSURE TO DETERMINE THE WAVELENGTH DEPENDENT DEGRADATION USING SPECTRALLY DISPERSED RADIATION |
| BS EN ISO 21003-1:2008 | Multilayer piping systems for hot and cold water installations inside buildings General |
| 17/30350551 DC : 0 | BS EN ISO 10927 - PLASTICS - DETERMINATION OF THE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMER SPECIES BY MATRIX-ASSISTED LASER DESORPTION/IONIZATION TIME-OF-FLIGHT MASS SPECTROMETRY (MALDI-TOF-MS) |
| BS 7297-1:1990 | Haemodialysers and related equipment Specification for haemodialysers, haemofilters and haemoconcentrators |
| 12/30254694 DC : DRAFT MAR 2012 | BS ISO 16525-8 - ADHESIVES - TEST METHODS FOR ISOTROPICALLY ELECTRICALLY CONDUCTING ADHESIVES - PART 8: ELECTROCHEMICAL-MIGRATION TEST METHODS |
| 01/102261 DC : DRAFT FEB 2001 | BS EN ISO 10318 - GEOSYNTHETICS - GEOTEXTILES, GEOTEXTILE-RELATED PRODUCTS, GEOMEMBRANES AND GEOSYNTHETIC CLAY LINERS - TERMS AND THEIR DEFINITIONS |
| BS ISO 12815:2013 | Fibre-reinforced plastic composites. Determination of plain-pin bearingstrength |
| 12/30254682 DC : DRAFT MAR 2012 | BS ISO 16525-4 - ADHESIVES - TEST METHODS FOR ISOTROPICALLY ELECTRICALLY CONDUCTING ADHESIVES - PART 4: DETERMINATION OF SHEAR STRENGTH AND ELECTRICAL RESISTANCE USING RIGID-TO-RIGID BONDED ASSEMBLIES |
| 17/30350545 DC : 0 | BS EN ISO 11357-3 - PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 3: DETERMINATION OF TEMPERATURE AND ENTHALPY OF MELTING AND CRYSTALLIZATION |
| DIN EN 15348:2015-01 | PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLY(ETHYLENE TEREPHTHALATE) (PET) RECYCLATES |
| 12/30256736 DC : 0 | BS ISO 4437-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL |
| BS EN 62011-1:2002 | Insulating materials. Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes Definitions, designations and general requirements |
| BS ISO 19095-4:2015 | Plastics. Evaluation of the adhesion interface performance in plastic-metal assemblies Environmental conditions for durability |
| BS EN 15348:2014 | Plastics. Recycled plastics. Characterization of poly(ethylene terephthalate) (PET) recyclates |
| ISO 16486-1:2012 | Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing Part 1: General |
| BS EN ISO 877-1:2010 | Plastics. Methods of exposure to solar radiation General guidance |
| 16/30321523 DC : 0 | BS ISO 19929 - PLASTICS - DETERMINATION OF AVERAGE MOLECULAR MASS AND MIXTURE RATIO OF POLY (ETHYLENE GLYCOL) AND ITS DERIVATIVES BY MALDI-TOF-MS |
| 18/30370150 DC : DRAFT APR 2018 | BS ISO 16014-3 - PLASTICS - DETERMINATION OF AVERAGE MOLECULAR WEIGHT AND MOLECULAR WEIGHT DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY - PART 3: LOW-TEMPERATURE METHOD |
| DIN EN ISO 11357-2 E : 2014 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 2: DETERMINATION OF GLASS TRANSITION TEMPERATURE AND GLASS TRANSITION STEP HEIGHT (ISO 11357-2:2013) |
| 12/30265045 DC : 0 | BS ISO 17221 - PLASTICS - DETERMINATION OF IMAGE CLARITY (DEGREE OF SHARPNESS OF REFLECTED OR TRANSMITTED IMAGE) |
| BS ISO 18249:2015 | Non-destructive testing. Acoustic emission testing. Specific methodology and general evaluation criteria for testing of fibre-reinforced polymers |
| 06/30148323 DC : 0 | ISO 24538 - PLASTICS - HOMOPOLYMER AND COPOLYMER RESINS OF VINYL CHLORIDE - DETERMINATION OF RESIDUAL VINYL CHLORIDE MONOMER - GAS-CHROMATOGRAPHIC METHOD ON DRY POWDER |
| PD CEN/TR 16149:2011 | Guidance Document for drafting CEN/TC 158 Standards |
| 11/30234454 DC : 0 | BS EN ISO 6721-1 - PLASTICS - DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES - PART 1: GENERAL PRINCIPLES |
| BS ISO 11357-7 : 2002 | |
| 12/30242496 DC : DRAFT MAR 2012 | BS ISO 16525-1 - ADHESIVES - TEST METHODS FOR ISOTROPICALLY ELECTRICALLY CONDUCTING ADHESIVES - PART 1: GENERAL TEST METHODS |
| 08/30170168 DC : DRAFT JULY 2008 | BS ISO 22391-1 - PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT) - PART 1: GENERAL |
| NF ISO 8516 : 2011 | TEXTILE GLASS - TEXTURED YARNS - BASIS FOR A SPECIFICATION |
| I.S. EN ISO 1133-2:2011 | PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS - PART 2: METHOD FOR MATERIALS SENSITIVE TO TIME-TEMPERATURE HISTORY AND/OR MOISTURE (ISO 1133-2:2011) |
| DIN EN 15422 E : 2008 | PRECAST CONCRETE PRODUCTS - SPECIFICATION OF GLASSFIBRES FOR REINFORCEMENT OF MORTARS AND CONCRETES |
| BS ISO 1382:2012 | Rubber. Vocabulary |
| 17/30335677 DC : 0 | BS EN ISO 178 - PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES |
| BS ISO 10724-2 : 1998 AMD 13401 | PLASTICS - INJECTION MOULDING OF TEST SPECIMENS OF THERMOSETTING POWDER MOULDING COMPOUNDS (PMCS) - SMALL PLATES |
| UNE-EN ISO 1133-2:2012 | Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture (ISO 1133-2:2011) |
| NF EN ISO 1133-2 : 2012 | PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS - PART 2: METHOD FOR MATERIALS SENSITIVE TO TIME-TEMPERATURE HISTORY AND/OR MOISTURE |
| UNI EN ISO 11357-4 : 2014 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 4: DETERMINATION OF SPECIFIC HEAT CAPACITY |
| NF ISO 3598 : 2011 | TEXTILE GLASS - YARNS - BASIS FOR A SPECIFICATION |
| BS EN ISO 6721-1:2011 | Plastics. Determination of dynamic mechanical properties General principles |
| BS 7544:1991 | Method for graphical presentation of the complex modulus of damping materials |
| I.S. EN ISO 11357-6:2013 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 6: DETERMINATION OF OXIDATION INDUCTION TIME (ISOTHERMAL OIT) AND OXIDATION INDUCTION TEMPERATURE (DYNAMIC OIT) (ISO 11357-6:2018) |
| 09/30191988 DC : 0 | BS ISO 10927 - DETERMINATION OF MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMER SPECIES BY MATRIX-ASSISTED LASER DESORPTION/IONIZATION TIME-OF-FLIGHT MASS SPECTROMETRY (MALDITOF-MS) |
| BS ISO 6237:2017 | Adhesives. Wood-to-wood adhesive bonds. Determination of shear strength by tensile loading |
| ISO/TR 13329:2012 | Nanomaterials Preparation of material safety data sheet (MSDS) |
| FD T50 063 : 95 FD | PLASTICS - PROCESSING MATERIALS - GUIDE FOR THE ELABORATION OF A TECHNICAL SHEET |
| DIN EN ISO 1133-2:2012-03 | Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture (ISO 1133-2:2011) |
| 09/30192414 DC : 0 | BS ISO 16014-3 - PLASTICS - DETERMINATION OF AVERAGE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY - PART 3: LOW-TEMPERATURE METHOD |
| DIN EN ISO 16396-2 E : 2017 | PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 16396-2:2017) |
| ISO 16525-4:2014 | Adhesives Test methods for isotropic electrically conductive adhesives Part 4: Determination of shear strength and electrical resistance using rigid-to-rigid bonded assemblies |
| ISO 10927:2011 | Plastics Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) |
| BS ISO 12086-2 : 2001 AMD 10637 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS |
| ISO 15270:2008 | Plastics — Guidelines for the recovery and recycling of plastics waste |
| ISO 10364:2015 | Structural adhesives — Determination of the pot life (working life) of multi-component adhesives |
| I.S. EN ISO 21003-1:2008 | MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 1: GENERAL |
| BS ISO 18437-6:2017 | Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials Time-temperature superposition |
| I.S. EN ISO 11358-1:2014 | PLASTICS - THERMOGRAVIMETRY (TG) OF POLYMERS - PART 1: GENERAL PRINCIPLES (ISO 11358-1:2014) |
| S.R. CEN/TS 16011:2013 | PLASTICS - RECYCLED PLASTICS - SAMPLE PREPARATION |
| I.S. EN ISO 25762:2012 | PLASTICS - GUIDANCE ON THE ASSESSMENT OF THE FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED POLYMER COMPOSITES (ISO 25762:2009) |
| I.S. EN 16240:2013 | LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 13245-2:2008 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 2: PVC-U PROFILES AND PVC-UE PROFILES FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES |
| UNE-EN ISO 16396-2:2017 | Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 16396-2:2017) |
| EN ISO 4007:2012 | Personal protective equipment - Eye and face protection - Vocabulary (ISO 4007:2012) |
| BS IEC 62899-201 : 2016 | PRINTED ELECTRONICS - PART 201: MATERIALS - SUBSTRATES |
| NF EN ISO 877-1 : 2011 | PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE |
| I.S. EN 17098-2:2018 | PLASTICS - BARRIER FILMS FOR AGRICULTURAL AND HORTICULTURAL SOIL DISINFECTION BY FUMIGATION - PART 2: METHOD FOR FILM PERMEABILITY DETERMINATION USING A STATIC TECHNIQUE |
| ISO 16014-5:2012 | Plastics Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography Part 5: Method using light-scattering detection |
| ISO 12815:2013 | Fibre-reinforced plastic composites — Determination of plain-pin bearing strength |
| I.S. EN ISO 11357-3:2013 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 3: DETERMINATION OF TEMPERATURE AND ENTHALPY OF MELTING AND CRYSTALLIZATION (ISO 11357-3:2018) |
| ISO 12418-2:2012 | Plastics — Post-consumer poly(ethylene terephthalate) (PET) bottle recyclates — Part 2: Preparation of test specimens and determination of properties |
| ISO 6707-3:2017 | Buildings and civil engineering works — Vocabulary — Part 3: Sustainability terms |
| ISO 11359-3:2002 | Plastics Thermomechanical analysis (TMA) Part 3: Determination of penetration temperature |
| BS EN 13476-1:2007 | Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) General requirements and performance characteristics |
| I.S. EN 1013:2012 | LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| BS ISO 16014-4:2012 | Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography High-temperature method |
| ISO 1183-1:2012 | Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method |
| BS 2782-7 Method 730A:1979 | Methods of testing plastics. Rheological properties Determination of reduced viscosity (viscosity number) and intrinsic viscosity of plastics in dilute solution |
| BS EN ISO 15877-1 : 2009 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 1: GENERAL |
| CEI EN 60455-1 : 1999 | RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 1: DEFINITIONS AND GENERAL REQUIREMENTS |
| EN ISO 15876-1:2017 | Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 1: General (ISO 15876-1:2017) |
| UNI EN ISO 16014-5 : 2013 | PLASTICS - DETERMINATION OF AVERAGE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY - PART 5: METHOD USING LIGHT-SCATTERING DETECTION |
| BS EN 17098-1:2018 | Plastics. Barrier films for agricultural and horticultural soil disinfection by fumigation Specifications for barrier films |
| DIN EN ISO 6721-1:2011-08 | PLASTICS - DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES - PART 1: GENERAL PRINCIPLES |
| DIN EN ISO 15494:2016-03 | PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE), POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT), CROSSLINKED POLYETHYLENE (PE-X), POLYPROPYLENE (PP) - METRIC SERIES FOR SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM (ISO 15494:2015) |
| ISO 18437-3:2005 | Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 3: Cantilever shear beam method |
| EN 60455-1:1998 | Resin based reactive compounds used for electrical insulation - Part 1: Definitions and general requirements |
| PREN 13476-1 : DRAFT 2015 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYLSEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL - PART 1: GENERAL REQUIREMENTS AND PERFORMANCE CHARACTERISTICS |
| CLC/TS 61112:2006 | Blankets of insulating material for electrical purposes |
| BS EN ISO 1183-1:2012 | Plastics. Methods for determining the density of non-cellular plastics Immersion method, liquid pyknometer method and titration method |
| PREN 14758-1 : DRAFT 2011 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE WITH MINERAL MODIFIERS (PP-MD) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| I.S. EN ISO 22007-6:2015 | PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 6: COMPARATIVE METHOD FOR LOW THERMAL CONDUCTIVITIES USING A TEMPERATURE-MODULATION TECHNIQUE (ISO 22007-6:2014) |
| ISO 6721-12:2009 | Plastics Determination of dynamic mechanical properties Part 12: Compressive vibration Non-resonance method |
| ISO 21138-1:2007 | Plastics piping systems for non-pressure underground drainage and sewerage Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Part 1: Material specifications and performance criteria for pipes, fittings and system |
| ISO 16014-2:2012 | Plastics Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography Part 2: Universal calibration method |
| ISO 19095-1:2015 | Plastics Evaluation of the adhesion interface performance in plastic-metal assemblies Part 1: Guidelines for the approach |
| ISO 4427-1:2007 | Plastics piping systems Polyethylene (PE) pipes and fittings for water supply Part 1: General |
| ISO/TR 18196:2016 | Nanotechnologies — Measurement technique matrix for the characterization of nano-objects |
| ISO 16014-3:2012 | Plastics Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography Part 3: Low-temperature method |
| ISO 15439-1:2007 | Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 0,4 MPa (4 bar) Polyamide (PA) Part 1: General |
| I.S. EN 1455-1:1999 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) - PART 1: REQUIREMENTS FOR PIPES, FITTINGS AND THE SYSTEM |
| ISO 6721-1:2011 | Plastics Determination of dynamic mechanical properties Part 1: General principles |
| EN 13476-1:2018 | Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1:General requirements and performance characteristics |
| I.S. EN 61112:2009 | LIVE WORKING - ELECTRICAL INSULATING BLANKETS |
| I.S. EN ISO 1183-1:2012 | PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 1: IMMERSION METHOD, LIQUID PYKNOMETER METHOD AND TITRATION METHOD (ISO 1183-1:2012) |
| I.S. EN 60454-1:1995 | SPECIFICATIONS FOR PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 1: GENERAL REQUIREMENTS |
| ISO 18249:2015 | Non-destructive testing Acoustic emission testing Specific methodology and general evaluation criteria for testing of fibre-reinforced polymers |
| ISO 13106:2014 | Plastics Blow-moulded polypropylene containers for packaging of liquid foodstuffs |
| ISO 1268-1:2001 | Fibre-reinforced plastics Methods of producing test plates Part 1: General conditions |
| ISO 8516:2011 | Textile glass Textured yarns Basis for a specification |
| ISO 1268-10:2005 | Fibre-reinforced plastics — Methods of producing test plates — Part 10: Injection moulding of BMC and other long-fibre moulding compounds — General principles and moulding of multipurpose test specimens |
| IEC 61942:1997 | Live working - Gloves and mitts with mechanical protection |
| ISO 899-1:2017 | Plastics — Determination of creep behaviour — Part 1: Tensile creep |
| EN ISO 15877-1:2009/A1:2010 | Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: General - Amendment 1 (ISO 15877-1:2009/AMD 1:2010) |
| UNE-EN ISO 1043-1:2012 | Plastics - Symbols and abbreviated terms - Part 1: Basic polymers and their special characteristics (ISO 1043-1:2011) |
| ISO 11357-2:2013 | Plastics Differential scanning calorimetry (DSC) Part 2: Determination of glass transition temperature and glass transition step height |
| DIN EN ISO 2078:2016-05 | Textile glass - Yarns - Designation (ISO 2078:1993 + Amd 1:2015) (includes Amendment :2015) |
| DIN EN ISO 1043-1:2016-09 | PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMERS AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011 + AMD.1:2016) |
| DIN EN ISO 1043-3:2015-09 (Draft) | PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 3: PLASTICIZERS (ISO 1043-3:2016) |
| DIN EN 14052:2013-04 | High performance industrial helmets (includes Amendment A1:2012) |
| DIN EN 397:2013-04 | Industrial safety helmets (includes Amendment A1:2012) |
| DIN EN 1453-1:2000-03 | PLASTICS PIPING SYSTEMS WITH STRUCTURED-WALL PIPES FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES AND THE SYSTEM |
| BS EN 1453-1:2000 | Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings. Unplasticized poly (vinyl chloride) (PVC-U) Specifications for pipes and the system |
| BS EN ISO 15874-1:2013 | Plastics piping systems for hot and cold water installations. Polypropylene (PP) General |
| BS EN ISO 12543-1:2011 | Glass in building. Laminated glass and laminated safety glass Definitions and description of component parts |
| BS EN ISO 6401:2008 | Plastics. Poly(vinyl chloride). Determination of residual vinyl chloride monomer. Gas-chromatographic method |
| ISO 2535:2001 | Plastics Unsaturated-polyester resins Measurement of gel time at ambient temperature |
| BS EN ISO 11469:2016 | Plastics. Generic identification and marking of plastics products |
| BS EN ISO 14529-2:2000 | Plastics. Melamine/phenolic powder moulding compounds (MP-PMCs) Preparation of test specimens and determination of properties |
| IEC 61479:2001+AMD1:2002 CSV | Live working - Flexible conductor covers (line hoses) of insulating material |
| BS EN ISO 9163:2005 | Textile glass. Rovings. Manufacture of test specimens and determination of tensile strength of impregnated rovings |
| BS EN ISO 1886:1995 | Reinforcement fibres. Sampling plans applicable to received batches |
| BS EN ISO 2535:2002 | Plastics. Unsaturated polyester resins. Measurement of gel time at ambient temperature |
| ISO 10082:1999 | Plastics Phenolic resins Classification and test methods |
| IEC 61112:2009 | Live working - Electrical insulating blankets |
| ISO 14529-3:1999 | Plastics Melamine/phenolic powder moulding compounds (MP-PMCs) Part 3: Requirements for selected moulding compounds |
| BS EN ISO 15252-3:2000 | Plastics. Epoxy powder moulding compounds (EP-PMCs) Requirements for selected moulding compounds |
| BS EN 14649:2005 | Precast concrete products. Test method for strength retention of glass fibres in cement and concrete (SIC test) |
| ISO 11358-1:2014 | Plastics Thermogravimetry (TG) of polymers Part 1: General principles |
| BS EN ISO 11339:2010 | Adhesives. T-peel test for flexible-to-flexible bonded assemblies |
| BS EN ISO 12086-2:2006 | Plastics. Fluoropolymer dispersions and moulding and extrusion materials Preparation of test specimens and determination of properties |
| ISO 15875-1:2003 | Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 1: General |
| BS EN 12654-1:1999 | Textile glass. Yarns Designation |
| IEC 60893-1:2004 | Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements |
| ISO 11667:1997 | Fibre-reinforced plastics — Moulding compounds and prepregs — Determination of resin, reinforced-fibre and mineral-filler content — Dissolution methods |
| BS EN ISO 13000-2:2005 | Plastics. Polytetrafluoroethylene (PTFE) semi-finished products Preparation of test specimens and determination of properties |
| BS EN ISO 10724-2:2001 | Plastics. Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) Small plates |
| BS EN 12576:1998 | Plastics. Fibre reinforced composites. Preparation of compression moulded test plates of SMC, BMC and DMC |
| ISO 308:1994 | Plastics Phenolic moulding materials Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state) |
| ISO 14528-2:1999 | Plastics Melamine-formaldehyde powder moulding compounds (MF-PMCs) Part 2: Preparation of test specimens and determination of properties |
| ISO 16525-9:2014 | Adhesives Test methods for isotropic electrically conductive adhesives Part 9: Determination of high-speed signal-transmission characteristics |
| ISO/TS 80004-6:2013 | Nanotechnologies Vocabulary Part 6: Nano-object characterization |
| ISO 1133-2:2011 | Plastics Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics Part 2: Method for materials sensitive to time-temperature history and/or moisture |
| BS EN 12654-2:1999 | Textile glass. Yarns Methods of test and general specifications |
| ISO 14528-3:1999 | Plastics Melamine-formaldehyde powder moulding compounds (MF-PMCs) Part 3: Requirements for selected moulding compounds |
| ISO 11357-1:2016 | Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles |
| IEC 61212-3-2:2013 | Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Round laminated moulded tubes |
| ISO 12543-1:2011 | Glass in building Laminated glass and laminated safety glass Part 1: Definitions and description of component parts |
| BS EN ISO 14527-1:2000 | Plastics. Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) Designation system and basis for specifications |
| BS EN 13677-3:2003 | Reinforced thermoplastic moulding compounds. Specification for GMT Specific requirements |
| BS EN 12481:2001 | Self adhesive tapes. Terminology |
| BS EN 1842:1997 | Plastics. Thermoset moulding compounds (SMC-BMC). Determination of compression moulding shrinkage |
| BS EN 131-2 : 2010 | LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING |
| EN 1453-1:2017/AC:2017 | PLASTICS PIPING SYSTEMS WITH STRUCTURED-WALL PIPES FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES AND THE SYSTEM |
| BS EN 1455-1:2000 | Plastics piping systems for soil and waste (low and high temperature) within the building structure. Acrylonitrile-butadiene-styrene (ABS) Specifications for pipes, fittings and the system |
| BS EN ISO 14530-3:2000 | Plastics. Unsaturated-polyester powder moulding compounds (UP-PMCs) Requirements for selected moulding compounds |
| BS EN 13003-2:1999 | Para-aramid fibre filament yarns Methods of test and general specifications |
| BS EN ISO 899-2 : 2003 | PLASTICS - DETERMINATION OF CREEP BEHAVIOUR - PART 2: FLEXURAL CREEP BY THREE-POINT LOADING |
| ISO 1874-2:2012 | Plastics Polyamide (PA) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| BS EN ISO 295:2004 | Plastics. Compression moulding of test specimens of thermosetting materials |
| DIN EN 13245-1 E : 2010 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 1: DESIGNATION OF PVC-U PROFILES |
| UNE-EN 1555-1:2011 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General |
| BS EN 12200-1:2016 | Plastics rainwater piping systems for above ground external use. Unplasticized poly(vinyl chloride) (PVC-U) Specifications for pipes, fittings and the system |
| UNE-EN ISO 8330:2014 | Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:2014) |
| ISO 11409:1993 | Plastics — Phenolic resins — Determination of heats and temperatures of reaction by differential scanning calorimetry |
| DIN EN 13245-1:2010-11 | Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 1: Designation of PVC-U profiles |
| BS EN 14409-1:2004 | Plastics piping systems for renovation of underground water supply networks General |
| ISO 20568-2:2017 | Plastics Fluoropolymer dispersions and moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| ISO 14530-2:1999 | Plastics Unsaturated-polyester powder moulding compounds (UP-PMCs) Part 2: Preparation of test specimens and determination of properties |
| ISO 15605:2000 | Adhesives Sampling |
| ISO 877-1:2009 | Plastics — Methods of exposure to solar radiation — Part 1: General guidance |
| ISO 15493:2003 | Plastics piping systems for industrial applications Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) Specifications for components and the system Metric series |
| UNE-EN ISO 15023-1:2017 | Plastics - Poly(vinyl alcohol) (PVAL) materials - Part 1: Designation system and basis for specifications (ISO 15023-1:2017) |
| ISO/TR 27165:2012 | Thermoplastics piping systems - Guidance for definitions of wall constructions for pipes |
| ISO 14530-1:1999 | Plastics Unsaturated-polyester powder moulding compounds (UP-PMCs) Part 1: Designation system and basis for specifications |
| ISO 14527-3:1999 | Plastics Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) Part 3: Requirements for selected moulding compounds |
| ISO 10724-2:1998 | Plastics — Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) — Part 2: Small plates |
| ISO 14529-2:1999 | Plastics Melamine/phenolic powder moulding compounds (MP-PMCs) Part 2: Preparation of test specimens and determination of properties |
| ISO 14529-1:1999 | Plastics Melamine/phenolic powder moulding compounds (MP-PMCs) Part 1: Designation system and basis for specifications |
| ISO/TR 22007-5:2011 | Plastics Determination of thermal conductivity and thermal diffusivity Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples |
| BS EN ISO 14528-1:2000 | Plastics. Melamine-formaldehyde powder moulding compounds (MF-PMCs) Designation system and basis for specifications |
| ISO 16396-1:2015 | Plastics — Polyamide (PA) moulding and extrusion materials — Part 1: Designation system, marking of products and basis for specifications |
| BS EN ISO 306:2013 | Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST) |
| ISO 12086-2:2006 | Plastics Fluoropolymer dispersions and moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| ISO 22391-1:2009 | Plastics piping systems for hot and cold water installations Polyethylene of raised temperature resistance (PE-RT) Part 1: General |
| BS EN 12666-1 : 2005 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| ISO 22007-6:2014 | Plastics — Determination of thermal conductivity and thermal diffusivity — Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique |
| ISO 306:2013 | Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST) |
| ISO 12114:1997 | Fibre-reinforced plastics — Thermosetting moulding compounds and prepregs — Determination of cure characteristics |
| ISO 14530-3:1999 | Plastics Unsaturated-polyester powder moulding compounds (UP-PMCs) Part 3: Requirements for selected moulding compounds |
| BS EN 14020-1:2002 | Reinforcements. Specification for textile glass rovings Designation |
| IEC 61212-1:2006 | Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements |
| BS EN ISO 14527-2:2000 | Preparation of test specimens and determination of properties |
| ISO 14526-3:1999 | Plastics Phenolic powder moulding compounds (PF-PMCs) Part 3: Requirements for selected moulding compounds |
| ISO 22007-3:2008 | Plastics Determination of thermal conductivity and thermal diffusivity Part 3: Temperature wave analysis method |
| BS EN ISO 14527-3:2000 | Plastics. Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) Requirements for selected moulding compounds |
| BS EN 14020-2:2002 | Reinforcements. Specification for textile glass rovings Methods of test and general requirements |
| BS EN 61212-3-1:2013 | Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes Specifications for individual materials. Sheet 1: Round laminated rolled tubes |
| BS EN 13245-1:2010 | Plastics. Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications Designation of PVC-U profiles |
| ISO 8330:2007 | Rubber and plastics hoses and hose assemblies Vocabulary |
| ISO 16396-2:2017 | Plastics Polyamide (PA) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| ISO 11337:2010 | Plastics — Polyamides — Determination of e-caprolactam and w-laurolactam by gas chromatography |
| BS EN ISO 15875-1:2003 | Plastics piping systems for hot and cold water installations. Crosslinked polyethylene (PE-X) General |
| IEC 60464-1:1998+AMD1:2006 CSV | Varnishes used for electrical insulation - Part 1: Definitions and general requirements |
| ISO 20568-1:2017 | Plastics Fluoropolymer dispersions and moulding and extrusion materials Part 1: Designation system and basis for specifications |
| ISO 13000-2:2005 | Plastics Polytetrafluoroethylene (PTFE) semi-finished products Part 2: Preparation of test specimens and determination of properties |
| ISO 295:2004 | Plastics — Compression moulding of test specimens of thermosetting materials |
| ISO 8256:2004 | Plastics — Determination of tensile-impact strength |
| ISO 11469:2016 | Plastics — Generic identification and marking of plastics products |
| ISO 15252-1:1999 | Plastics Epoxy powder moulding compounds (EP-PMCs) Part 1: Designation system and basis for specifications |
| BS EN ISO 11357-1:2016 | Plastics. Differential scanning calorimetry (DSC) General principles |
| ISO 14526-2:1999 | Plastics Phenolic powder moulding compounds (PF-PMCs) Part 2: Preparation of test specimens and determination of properties |
| ISO 14528-1:1999 | Plastics Melamine-formaldehyde powder moulding compounds (MF-PMCs) Part 1: Designation system and basis for specifications |
| ISO 15750-3:2002 | Packaging Steel drums Part 3: Inserted flange-type closure systems |
| ISO 12086-1:2006 | Plastics Fluoropolymer dispersions and moulding and extrusion materials Part 1: Designation system and basis for specifications |
| BS EN 14758-1:2012 | Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene with mineral modifiers (PP-MD) Specifications for pipes, fittings and the system |
| ISO 3672-1:2000 | Plastics Unsaturated-polyester resins (UP-R) Part 1: Designation system |
| BS EN ISO 11401:1998 | Plastics. Phenolic resins. Separation by liquid chromatography |
| UNE-EN 1013:2013 | Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings - Requirements and test methods |
| UNE-EN ISO 11469:2017 | Plastics - Generic identification and marking of plastics products (ISO 11469:2016) |
| BS EN 14052 : 2012 | HIGH PERFORMANCE INDUSTRIAL HELMETS |
| EN ISO 11357-2:2014 | Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and glass transition step height (ISO 11357-2:2013) |
| ISO 22007-2:2015 | Plastics Determination of thermal conductivity and thermal diffusivity Part 2: Transient plane heat source (hot disc) method |
| BS EN 15342:2007 | Plastics. Recycled plastics. Characterization of polystyrene (PS) recyclates |
| UNE-CEN/TR 15438:2012 IN | Plastics piping systems - Guidance for coding of products and their intended uses |
| ISO 11401:1993 | Plastics — Phenolic resins — Separation by liquid chromatography |
| ISO 10365:1992 | Adhesives Designation of main failure patterns |
| UNE-CEN/TS 16011:2015 EX | Plastics - Recycled plastics - Sample preparation |
| ISO 25762:2009 | Plastics Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites |
| ISO 11357-4:2014 | Plastics Differential scanning calorimetry (DSC) Part 4: Determination of specific heat capacity |
| UNE-EN ISO 11357-1:2017 | Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles (ISO 11357-1:2016) |
| BS EN 12971-3:1999 | Reinforcements. Specification for textile glass chopped strands Specific requirements |
| BS EN ISO 11667:2000 | Fibre reinforced plastics. Moulding compounds and prepregs. Determination of resin, reinforcement-fibre and mineral-filler content. Dissolution methods |
| BS EN ISO 3672-1:2001 | Plastics. Unsaturated-polyester resins (UP-R) Designation system |
| BS EN 61212-3-3:2006 | Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes Specifications for individual materials - Round laminated moulded rods |
| BS EN ISO 14529-3:2000 | Plastics. Melamine/phenolic powder moulding compounds (MP-PMCs) Requirements for selected moulding compounds |
| BS EN ISO 14526-2:2000 | Plastics. Phenolic powder moulding compounds (PF-PMCs) Preparation of test specimens and determination of properties |
| ISO 899-2:2003 | Plastics Determination of creep behaviour Part 2: Flexural creep by three-point loading |
| ISO 10931:2005 | Plastics piping systems for industrial applications Poly(vinylidene fluoride) (PVDF) Specifications for components and the system |
| EN 15342:2007 | Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates |
| EN 14447:2005 | Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification |
| EN 15422:2008 | Precast concrete products - Specification of glassfibres for reinforcement of mortars and concretes |
| EN ISO 15252-1 : 1999 | PLASTICS - EPOXY POWDER MOULDING COMPOUNDS (EP-PMCS) - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
| EN 14409-1:2004 | Plastics piping systems for renovation of underground water supply networks - Part 1: General |
| EN ISO 14527-3 : 1999 | PLASTICS - UREA-FORMALDEHYDE AND UREA/MELAMINE-FORMALDEHYDE POWDER MOULDING COMPOUNDS (UF- AND UF/MF-PMCS) - PART 3: REQUIREMENTS FOR SELECTED MOULDING COMPOUNDS (ISO 14527-3:1999) |
| EN 14649 : 2005 | PRECAST CONCRETE PRODUCTS - TEST METHOD FOR STRENGTH RETENTION OF GLASS FIBRES IN CEMENT AND CONCRETE (SIC TEST) |
| EN ISO 15252-2 : 1999 | PLASTICS - EPOXY POWDER MOULDING COMPOUNDS (EP-PMCS) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| EN 15857:2010 | Non-destructive testing - Acoustic emission - Testing of fibre-reinforced polymers - Specific methodology and general evaluation criteria |
| EN 1452-1 : 1999 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL |
| EN ISO 22007-3:2012 | Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method (ISO 22007-3:2008) |
| EN 16153:2013+A1:2015 | Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods |
| EN ISO 16014-5:2012 | Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 5: Method using light-scattering detection (ISO 16014-5:2012) |
| EN 13280:2001 | Specification for glass fibre reinforced cisterns of one piece and sectional construction, for the storage, above ground, of cold water |
| EN 13677-3:2003 | Reinforced thermoplastic moulding compounds - Specification for GMT - Part 3: Specific requirements |
| EN ISO 22007-6:2015 | Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique (ISO 22007-6:2014) |
| EN ISO 15875-1:2003/A1:2007 | Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 1: General - Amendment 1 (ISO 15875-1:2003/Amd 1:2007) |
| EN 13677-2:2003 | Reinforced thermoplastic moulding compounds - Specification for GMT - Part 2: Methods of test and general requirements |
| EN ISO 2078:1994/A1:2015 | TEXTILE GLASS - YARNS - DESIGNATION (ISO 2078:1993/AMD 1:2015) |
| EN ISO 1874-2:2012 | Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1874-2:2012) |
| EN ISO 14529-2 : 1999 | PLASTICS - MELAMINE/PHENOLIC POWDER MOULDING COMPOUNDS (MP-PMCS) - PART 2 - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| EN ISO 1452-1:2009 | Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: General (ISO 1452-1:2009) |
| EN ISO 11409 : 1998 | PLASTICS - PHENOLIC RESINS - DETERMINATION OF HEATS AND TEMPERATURES OF REACTION BY DIFFERENTIAL SCANNING CALORIMETRY |
| EN 15347:2007 | Plastics - Recycled Plastics - Characterisation of plastics wastes |
| EN ISO 2535 : 2002 | PLASTICS - UNSATURATED POLYESTER RESINS - MEASUREMENT OF GEL TIME AT AMBIENT TEMPERATURE (ISO 2535:2001) |
| EN ISO 10724-1 : 2001 | PLASTICS - INJECTION MOULDING OF TEST SPECIMENS OF THERMOSETTING POWDER MOULDING COMPOUNDS (PMCS) - PART 1: GENERAL PRINCIPLES AND MOULDING OF MULTIPURPOSE TEST SPECIMENS |
| EN ISO 12086-2:2006/AC:2009 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| EN 15343:2007 | Plastics - Recycled Plastics - Plastics recycling traceability and assessment of conformity and recycled content |
| EN ISO 21003-1:2008 | Multilayer piping systems for hot and cold water installations inside buildings - Part 1: General (ISO 21003-1:2008) |
| EN ISO 8062-1 : 2007 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 1: VOCABULARY |
| UNI EN ISO 11339 : 2010 | ADHESIVES - T-PEEL TEST FOR FLEXIBLE-TO- FLEXIBLE BONDED ASSEMBLIES |
| EN ISO 15023-1:2017 | Plastics - Poly(vinyl alcohol) (PVAL) materials - Part 1: Designation system and basis for specifications (ISO 15023-1:2017) |
| EN ISO 9163:2005 | Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings (ISO 9163:2005) |
| EN ISO 14526-3 : 1999 | PLASTICS - PHENOLIC POWDER MOULDING COMPOUNDS (PF-PMCS) - PART 3: REQUIREMENTS FOR SELECTED MOULDING COMPOUNDS |
| EN ISO 10082 : 1999 | PLASTICS - PHENOLIC RESINS - CLASSIFICATION AND TEST METHODS |
| EN ISO 10931:2005/A1:2015 | Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Specifications for components and the system (ISO 10931:2005/FDAM 1:2015) |
| EN 397:2012+A1:2012 | Industrial safety helmets |
| EN 14020-2:2002 | Reinforcements - Specification for textile glass rovings - Part 2: Methods of test and general requirements |
| EN 12006-2:1998+A1:2009 | Non active surgical implants - Particular requirements for cardiac and vascular implants - Part 2: Vascular prostheses including cardiac valve conduits |
| EN 1401-1:2009 | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system |
| EN ISO 16396-2:2017 | Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 16396-2:2017) |
| EN ISO 10724-2 : 2000 | PLASTICS - INJECTION MOULDING OF TEST SPECIMENS OF THERMOSETTING POWDER MOULDING COMPOUNDS (PMCS) - PART 2: SMALL PLATES |
| EN 15345:2007 | Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates |
| EN 13706-2:2002 | Reinforced plastics composites - Specifications for pultruded profiles - Part 2: Methods of test and general requirements |
| EN ISO 12114 : 1997 | FIBRE-REINFORCED PLASTICS - THERMOSETTING MOULDING COMPOUNDS AND PREPREGS - DETERMINATION OF CURE CHARACTERISTICS (ISO 12114:1997) |
| EN ISO 877-1:2010 | Plastics - Methods of exposure to solar radiation - Part 1: General guidance (ISO 877-1:2009) |
| EN ISO 11358-1:2014 | Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles (ISO 11358-1:2014) |
| EN ISO 11401 : 1998 | PLASTICS - PHENOLIC RESINS - SEPARATION BY LIQUID CHROMATOGRAPHY |
| EN ISO 1172:1998 | Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods (ISO 1172:1996) |
| EN ISO 11469:2016 | Plastics - Generic identification and marking of plastics products (ISO 11469:2016) |
| EN ISO 14530-2 : 1999 | PLASTICS - UNSATURATED-POLYESTER POWDER MOULDING COMPOUNDS (UP-PMCS) - PART 2 - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| EN ISO 11339:2010 | Adhesives - T-peel test for flexible-to-flexible bonded assemblies (ISO 11339:2010) |
| I.S. EN ISO 10365:1996 | ADHESIVES - DESIGNATION OF MAIN FAILURE PATTERNS |
| EN ISO 604 : 2003 | PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES (ISO 604:2002) |
| EN 15870:2009 | Adhesives - Determination of tensile strength of butt joints (ISO 6922:1987 modified) |
| EN ISO 12115 : 1997 | FIBRE-REINFORCED PLASTICS - THERMOSETTING MOULDING COMPOUNDS AND PREPREGS - DETERMINATION OF FLOWABILITY, MATURATION AND SHELF LIFE |
| EN ISO 14528-3 : 1999 | PLASTICS - MELAMINE-FORMALDEHYDE POWDER MOULDING COMPOUNDS (MF-PMCS) - PART 3 - REQUIREMENTS FOR SELECTED MOULDING COMPOUNDS |
| EN 15348:2014 | Plastics - Recycled plastics - Characterization of poly(ethylene terephthalate) (PET) recyclates |
| EN 14052:2012+A1:2012 | High performance industrial helmets |
| EN ISO 11667 : 1999 | FIBRE-REINFORCED PLASTICS - MOULDING COMPOUNDS AND PREPREGS - DETERMINATION OF RESIN, REINFORCED-FIBRE AND MINERAL-FILLER CONTENT - DISSOLUTION METHODS |
| EN 16575:2014 | Bio-based products - Vocabulary |
| EN 14020-1:2002 | Reinforcements - Specification for textile glass rovings - Part 1: Designation |
| EN ISO 20568-2:2017 | Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20568-2:2017) |
| EN ISO 306:2013 | Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2013) |
| EN 1842:1997 | Plastics - Thermoset moulding compounds (SMC - BMC) - Determination of compression moulding shrinkage |
| EN 13706-1:2002 | Reinforced plastics composites - Specifications for pultruded profiles - Part 1: Designation |
| EN ISO 14528-2 : 1999 | PLASTICS - MELAMINE/PHENOLIC POWDER MOULDING COMPOUNDS (MP-PMCS) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| EN ISO 20568-1:2017 | Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 20568-1:2017) |
| EN ISO 8257-1:2006 | Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 8257-1:1998) |
| EN ISO 22391-1:2009 | Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 1: General (ISO 22391-1:2009) |
| EN ISO 15252-3 : 1999 | PLASTICS - EPOXY POWDER MOULDING COMPOUNDS (EP-PMCS) - PART 3: REQUIREMENTS FOR SELECTED MOULDING COMPOUNDS |
| EN ISO 15493:2003/A1:2017 | Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components and the system - Metric series - Amendment 1 (ISO 15493:2003/Amd 1:2016 + Cor 1:2004) |
| EN ISO 11337:2010 | Plastics - Polyamides - Determination of e-caprolactam and w-laurolactam by gas chromatography (ISO 11337:2010) |
| EN ISO 14528-1 : 1999 | PLASTICS - MELAMINE-FORMALDEHYDE POWDER MOULDING COMPOUNDS (MF-PMCS) - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
| EN ISO 14529-1 : 1999 | PLASTICS - MELAMINE/PHENOLIC POWDER MOULDING COMPOUNDS (MP-PMCS) - PART 1 - DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
| EN 14118-2:2003 | Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 2: Methods of test and general requirements |
| EN 14758-1:2012 | Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittings and the system |
| EN ISO 6401:2008 | Plastics - Poly(vinyl chloride) - Determination of residual vinyl chloride monomer - Gas-chromatographic method (ISO 6401:2008) |
| EN ISO 308 : 1997 | PLASTICS - PHENOLIC MOULDING MATERIALS - DETERMINATION OF ACETONE-SOLUBLE MATTER (APPARENT RESIN CONTENT OF MATERIAL IN THE UNMOULDED STATE) |
| EN ISO 25762:2012 | Plastics - Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites (ISO 25762:2009) |
| EN ISO 14526-1 : 1999 | PLASTICS - PHENOLIC POWDER MOULDING COMPOUNDS (PF/PMCS) - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
| EN ISO 16664:2017 | Gas analysis - Handling of calibration gases and gas mixtures - Guidelines (ISO 16664:2017) |
| EN 15701:2016 (edition 2) | Plastics - Thermoplastic jackets for insulation products for building equipment and industrial installations - Requirements and test methods |
| EN ISO 16396-1:2015 | Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation system, marking of products and basis for specifications (ISO 16396-1:2015) |
| EN 14598-1:2005 | Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 1: Designation |
| EN ISO 11357-7:2015 | Plastics - Differential scanning calorimetry (DSC) - Part 7: Determination of crystallization kinetics (ISO 11357-7:2015) |
| EN ISO 295 : 2004 | PLASTICS - COMPRESSION MOULDING OF TEST SPECIMENS OF THERMOSETTING MATERIALS |
| EN ISO 14530-3 : 1999 | PLASTICS - UNSATURATED-POLYESTER POWDER MOULDING COMPOUNDS (UP-PMCS) - PART 3: REQUIREMENTS FOR SELECTED MOULDING COMPOUNDS |
| EN ISO 11357-1:2016 | Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles (ISO 11357-1:2016) |
| EN ISO 1043-3 : 1999 | PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 3: PLASTICIZERS (ISO 1043-3:2016) |
| EN ISO 1133-2:2011 | Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture (ISO 1133-2:2011) |
| EN 13887:2003 | Structural Adhesives - Guidelines for surface preparation of metals and plastics prior to adhesive bonding |
| EN ISO 14527-2 : 1999 | PLASTICS - UREA-FORMALDEHYDE AND UREA/MELAMINE-FORMALDEHYDE POWDER MOULDING COMPOUNDS (UF- AND UF/MF-PMCS) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| EN 15346:2014 | Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates |
| EN ISO 14530-1 : 1999 | PLASTICS - UNSATURATED-POLYESTER POWDER MOULDING COMPOUNDS (UP-PMCS) - PART 1 - DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
| DIN EN ISO 16396-1 E : 2015 | PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM, MARKING OF PRODUCTS AND BASIS FOR SPECIFICATIONS (ISO 16396-1:2015) |
| ISO 2561:2012 | Plastics — Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography |
| I.S. EN 1852-1:2018 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| DIN EN ISO 21003-1:2008-11 | MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 1: GENERAL |
| BS EN ISO 11357-2:2014 | Plastics. Differential scanning calorimetry (DSC) Determination of glass transition temperature and glass transition step height |
| UNE-EN ISO 16396-1:2015 | Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation system, marking of products and basis for specifications (ISO 16396-1:2015) |
| 17/30363924 DC : 0 | BS EN 17176-1 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE GROUND DRAINAGE, SEWERAGE AND IRRIGATION UNDER PRESSURE - ORIENTED UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-O) - PART 1: GENERAL |
| PREN ISO 6721-1 : DRAFT 2011 | PLASTICS - DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES - PART 1: GENERAL PRINCIPLES |
| DIN EN 15870:2009-08 | ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF BUTT JOINTS |
| BS EN ISO 22007-3:2012 | Plastics. Determination of thermal conductivity and thermal diffusivity Temperature wave analysis method |
| UNI EN ISO 22007-3 : 2012 | PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 3: TEMPERATURE WAVE ANALYSIS METHOD |
| ISO 23559:2007 | Plastics Film and sheeting Guidance on the testing of thermoplastic films |
| 06/30152065 DC : DRAFT JUNE 2006 | BS EN ISO 6401 - PLASTICS - HOMOPOLYMER AND COPOLYMER RESINS OF VINYL CHLORIDE - DETERMINATION OF RESIDUAL VINYL CHLORIDE MONOMER - GAS CHROMATOGRAPHIC METHOD |
| ISO 17467-1:2012 | Plastics piping systems for the supply of gaseous fuels Unplasticized polyamide (PA-U) piping systems jointed by solvent cement Part 1: General |
| 13/30277400 DC : 0 | BS EN 131-6 - LADDERS - PART 6: TELESCOPIC LADDERS |
| 06/30130313 DC : DRAFT MAR 2006 | ISO 23559 - PLASTICS - FILM AND SHEETING - GUIDE FOR THE TESTING OF THERMOPLASTIC FILMS |
| BS ISO 16365-2:2014 | Plastics. Thermoplastic polyurethanes for moulding and extrusion Preparation of test specimens and determination of properties |
| 17/30348286 DC : 0 | BS EN 17098-1 - PLASTICS - BARRIER FILMS FOR AGRICULTURAL AND HORTICULTURAL SOIL DISINFECTION BY FUMIGATION - PART 1: SPECIFICATIONS FOR BARRIER FILMS |
| 04/30091874 DC : DRAFT FEB 2004 | BS EN ISO 13000-1 - PLASTICS - POLYTETRAFLUOROETHYLENE (PTFE) SEMI-FINISHED PRODUCTS - PART 1: REQUIREMENTS AND DESIGNATION |
| BS ISO 17467-1:2012 | Plastics piping systems for the supply of gaseous fuels. Unplasticized polyamide (PA-U) piping systems jointed by solvent cement General |
| I.S. EN ISO 20568-1:2017&LC:2017 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 20568-1:2017) |
| PREN 17176-1 : DRAFT 2017 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE GROUND DRAINAGE, SEWERAGE AND IRRIGATION UNDER PRESSURE - ORIENTED UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-O) - PART 1: GENERAL |
| I.S. EN 15534-1:2014 | COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS |
| BS ISO 4427-1 : 2007 | PLASTICS PIPING SYSTEMS - POLYETHYLENE (PE) PIPES AND FITTINGS FOR WATER SUPPLY - PART 1: GENERAL |
| BS ISO 30012 : 2016 | CARBON-FIBRE-REINFORCED PLASTICS - DETERMINATION OF THE SIZE AND ASPECT RATIO OF CRUSHED OBJECTS |
| BS ISO 18437-4:2008 | Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials Dynamic stiffness method |
| UNE-EN ISO 20568-2:2017 | Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20568-2:2017) |
| 99/201503 DC : 0 | IEC 61479 ED.1 - LIVE WORKING - CONDUCTOR COVERS (LINE HOSES) OR INSULATING MATERIAL FOR ELECTRICAL PURPOSES |
| DIN EN ISO 20568-1 E : 2017 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 20568-1:2017) |
| I.S. EN 14409-1:2004 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 1: GENERAL |
| 16/30336081 DC : 0 | BS EN ISO 16664 - GAS ANALYSIS - HANDLING OF CALIBRATION GASES AND GAS MIXTURES - GUIDELINES |
| 08/30182090 DC : DRAFT MAY 2008 | BS EN ISO 11357-1 - PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 1: GENERAL PRINCIPLES |
| BS 7297-2:1990 | Haemodialysers and related equipment Specification for extracorporeal circuits for use with haemodialysers, haemofilters and haemoconcentrators |
| 05/30130982 DC : DRAFT MAR 2005 | ISO 15033 - PLASTICS - DETERMINATION OF CAPROLACTAM AND ITS CYCLIC AND LINEAR OLIGOMERS BY HPLC |
| 16/30314675 DC : 0 | BS ISO 19469-1 - PLASTIC PIPING SYSTEMS FOR NON PRESSURE UNDERGROUND DRAINAGE - SINGLE WALL CORRUGATED PIPING SYSTEMS OF POLYETHYLENE (PE), POLYPROPYLENE (PP) AND UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL REQUIREMENTS AND PERFORMANCE CHARACTERISTICS |
| NF EN ISO 22391-1 : 2010 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT) - PART 1: GENERAL |
| ONORM EN ISO 1183-1 : 2013 | PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 1: IMMERSION METHOD, LIQUID PYKNOMETER METHOD AND TITRATION METHOD (ISO 1183-1:2012) |
| UNE-EN 15346:2015 | Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates |
| BS ISO 16525-6:2014 | Adhesives. Test methods for isotropic electrically conductive adhesives Determination of pendulum-type shear impact |
| 10/30196247 DC : 0 | BS ISO 12418-2 - PLASTICS - POST-CONSUMER POLY(ETHYLENE TEREPHTHALATE) (PET) BOTTLE REYCLATES - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| DIN EN ISO 11357-3 E : 2013 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 3: DETERMINATION OF TEMPERATURE AND ENTHALPY OF MELTING AND CRYSTALLIZATION (ISO 11357-3:2011) |
| BS ISO 12817:2013 | Fibre-reinforced plastic composites. Determination of open-hole compression strength |
| 08/30154274 DC : DRAFT MAR 2008 | BS ISO 25762 - PLASTICS - GUIDANCE ON THE ASSESSMENT OF FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED COMPOSITES |
| BS ISO 13636:2012 | Plastics. Film and sheeting. Non-oriented poly(ethylene terephthalate) (PET) sheets |
| BS ISO 16365-1:2014 | Plastics. Thermoplastic polyurethanes for moulding and extrusion Designation system and basis for specifications |
| 05/30111233 DC : 0 | BS EN 13245-2 - PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 2: PROFILES FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES |
| ISO 15034:1999 | Composites Prepregs Determination of resin flow |
| DIN EN 16575:2014-10 | BIO-BASED PRODUCTS - VOCABULARY |
| BS EN 15534-1 : 2014 | COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS |
| CEI EN 62011-1 : 2003 | INSULATING MATERIALS - INDUSTRIAL, RIGID, MOULDED, LAMINATED TUBES AND RODS OF RECTANGULAR AND HEXAGONAL CROSS-SECTION BASED UPON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 1: DEFINITIONS, DESIGNATIONS AND GENERAL REQUIREMENTS |
| BS ISO 16525-8:2014 | Adhesives. Test methods for isotropic electrically conductive adhesives Electrochemical-migration test methods |
| BS ISO 1172 : 96 AMD 10350 | TEXTILE-GLASS-REINFORCED PLASTICS - PREPREGS, MOULDING COMPOUNDS AND LAMINATES - DETERMINATION OF THE TEXTILE-GLASS AND MINERAL-FILLER CONTENT - CALCINATION METHODS |
| 13/30276237 DC : 0 | BS EN 15348 - PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(ETHYLENE TEREPHTHALATE) (PET) RECYCLATES |
| 11/30196210 DC : 0 | BS ISO 12815 - FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF PLAIN-PIN BEARING STRENGTH |
| BS ISO 18437-1:2012 | Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials Principles and guidelines |
| I.S. EN 12575:1998 | PLASTICS - THERMOSET MOULDING COMPOUNDS - DETERMINATION OF THE DEGREE OF FIBRE WET OUT IN SMC |
| DIN EN 15348 E : 2015 | PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLY(ETHYLENE TEREPHTHALATE) (PET) RECYCLATES |
| ISO 24538:2008 | Plastics Homopolymer and copolymer resins of vinyl chloride Determination of residual vinyl chloride monomer by gas-chromatographic analysis of dry powder |
| BS EN ISO 15750-3:2008 | Packaging. Steel drums Inserted flange-type closure systems |
| 00/203243 DC : 0 | IEC 60743. ED. 2 - LIVE WORKING - TERMINOLOGY FOR TOOLS, EQUIPMENT AND DEVICES |
| I.S. EN 16153:2013 | LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| S.R. CEN ISO/TR 27165:2012 | THERMOPLASTICS PIPING SYSTEMS - GUIDANCE FOR DEFINITIONS OF WALL CONSTRUCTIONS FOR PIPES (ISO/TR 27165:2012) |
| PD CEN ISO/TR 27165:2012 | Thermoplastics piping systems. Guidance for definitions of wall constructions for pipes |
| DIN EN ISO 20568-1:2015-07 (Draft) | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 20568-1:2017) |
| NF EN 61479 : 2001 AMD 1 2003 | LIVE WORKING - FLEXIBLE CONDUCTOR COVERS (LINE HOSES) OF INSULATING MATERIAL |
| 00/105249 DC : DRAFT JULY 2000 | PREN 13956 - FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING - DEFINITIONS AND CHARACTERISTICS |
| NF EN 60455-1 : 1999 | RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - DEFINITIONS AND GENERAL REQUIREMENTS |
| NF EN ISO 1043-1 : 2012 AMD 1 2016 | PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMERS AND THEIR SPECIAL CHARACTERISTICS |
| I.S. EN 15344:2007 | PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYETHYLENE (PE) RECYCLATES |
| UNE-EN ISO 11357-3:2013 | Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization (ISO 11357-3:2011) |
| 11/30240212 DC : 0 | BS EN ISO 8330 - RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - VOCABULARY |
| UNI EN ISO 3451-1 : 2009 | PLASTICS - DETERMINATION OF ASH - PART 1: GENERAL METHODS |
| BS ISO 12086-1 : 1995 AMD 10638 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
| BS ISO 12013-2:2012 | Paints and varnishes. Determination of curing characteristics using a free damped oscillation method Glass transition temperature |
| ISO/TR 13014:2012 | Nanotechnologies Guidance on physico-chemical characterization of engineered nanoscale materials for toxicologic assessment |
| BS EN ISO 15494:2015 | Plastics piping systems for industrial applications. Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP). Metric series for specifications for components and the system |
| ISO 19212:2006 | Adhesives Determination of temperature dependence of shear strength |
| 08/30189974 DC : DRAFT DEC 2008 | BS EN 13245-1 - PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 1: DESIGNATION OF PVC-U PROFILES |
| NF EN 60464-1 : 1999 AMD 1 2006 | VARNISHES USED FOR ELECTRICAL INSULATION - PART 1: DEFINITIONS AND GENERAL REQUIREMENTS |
| 07/30127284 DC : 0 | BS EN ISO 4892-1 - PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE |
| 14/30318870 DC : 0 | BS PD CEN/TS 16861 - PLASTICS - RECYCLED PLASTICS - DETERMINATION OF SELECTED MARKER COMPOUNDS IN FOOD GRADE RECYCLED POLYETHYLENE TEREPHTHALATE (PET) |
| BS EN ISO 20568-2:2017 | Plastics. Fluoropolymer dispersions and moulding and extrusion materials Preparation of test specimens and determination of properties |
| BS ISO 1268-8:2004 | Fibre-reinforced plastics. Methods of producing test plates Compression moulding of SMC and BMC |
| 15/30324130 DC : 0 | BS EN ISO 15876-1 - PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTENE (PB) - PART 1: GENERAL |
| NF EN ISO 22007-3 : 2012 | PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 3: TEMPERATURE WAVE ANALYSIS METHOD |
| 10/30228348 DC : 0 | BS EN ISO 15874-1 - PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 1: GENERAL |
| BS IEC 61112:1992 | Blankets of insulating material for electrical purposes |
| XP T51 224-1 : 1991 XP | PLASTICS - DETERMINATION OF THE THERMAL STABILITY BY OVER DRYING (FLOATING PLATEN CHAMBER) - PART 1: GENERAL |
| BS ISO 11357-2 : 2013 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 2: DETERMINATION OF GLASS TRANSITION TEMPERATURE AND GLASS TRANSITION STEP HEIGHT |
| PREN 15346 : DRAFT 2013 | PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES |
| EN 1329-1:2014+A1:2018 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the systems |
| I.S. EN 13476-1:2007 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY (VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 1: GENERAL REQUIREMENTS AND PERFORMANCE CHARACTERISTICS |
| UNE-EN 13245-3:2011 | Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 3: Designation of PVC-UE profiles |
| 04/30091870 DC : DRAFT FEB 2004 | BS EN ISO 12086-2 - PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| 05/19970897 DC : 0 | BS ISO 4898 - RIGID CELLULAR PLASTICS - THERMAL INSULATION PRODUCTS FOR BUILDINGS - SPECIFICATIONS |
| UNI EN 1013 : 2015 | LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 15494:2015 | PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE), POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT), CROSSLINKED POLYETHYLENE (PE-X), POLYPROPYLENE (PP) - METRIC SERIES FOR SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM (ISO 15494:2015) |
| I.S. EN ISO 1043-1:2011 | PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMERS AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011) |
| UNI EN ISO 15750-3 : 2008 | PACKAGING - STEEL DRUMS - PART 3: INSERTED FLANGE-TYPE CLOSURE SYSTEMS |
| 06/30146747 DC : DRAFT FEB 2006 | ISO 22007-2 - PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 2: TRANSIENT PLANE HEAT SOURCE (HOT DISK) METHOD |
| 09/30192411 DC : 0 | BS ISO 16014-2 - PLASTICS - DETERMINATION OF AVERAGE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY - PART 2: UNIVERSAL CALIBRATION METHOD |
| SAE AMS 2950/1 : 2008 | PASTE ADHESIVE FOR CORE RESTORATION - PART 1: GENERAL REQUIREMENTS |
| ISO 15494:2015 | Plastics piping systems for industrial applications — Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) — Metric series for specifications for components and the system |
| DIN 7724:1993-04 | POLYMERIC MATERIALS; GROUPING OF POLYMERIC MATERIALS BASED ON THEIR MECHANICAL BEHAVIOUR |
| UNI EN ISO 22391-1 : 2010 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT) - PART 1: GENERAL |
| DIN EN ISO 22391-1:2010-04 | Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 1: General (ISO 22391-1:2009) |
| UNI EN ISO 11357-2 : 2014 | PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 2: DETERMINATION OF GLASS TRANSITION TEMPERATURE AND GLASS TRANSITION STEP HEIGHT |
| UNI EN ISO 1133-2 : 2012 | PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS - PART 2: METHOD FOR MATERIALS SENSITIVE TO TIME-TEMPERATURE HISTORY AND/OR MOISTURE |
| I.S. EN 15348:2014 | PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLY(ETHYLENE TEREPHTHALATE) (PET) RECYCLATES |
| ISO 20819:2018 | Plastics Wood-plastic recycled composites (WPRC) Specification |
| ASTM D 4092 :2007 | Standard Terminology: Plastics: Dynamic Mechanical Properties |
| EN ISO 3451-1:2008 | Plastics - Determination of ash - Part 1: General methods (ISO 3451-1:2008) |
| UNE-ISO 1268-10:2012 | Fibre-reinforced plastics. Methods of producing test plates. Part 10: Injection moulding of BMC and other long-fibre moulding compounds. General principles and moulding of multipurpose test specimens |
| I.S. EN ISO 6721-1:2011 | PLASTICS - DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES - PART 1: GENERAL PRINCIPLES |
| I.S. EN ISO 22391-1:2009 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT) - PART 1: GENERAL |
| NFL 17 021 : 98 PR | AEROSPACE SERIES - NON-METALLIC MATERIALS - RESINS, ADHESIVES, REINFORCED PLASTICS, PREIMPREGNATES - CHARACTERISATION BY LIQUID CHROMATOGRAPHY |
| I.S. EN 62011-1:2002 | INSULATING MATERIALS - INDUSTRIAL, RIGID, MOULDED, LAMINATED TUBES AND RODS OF RECTANGULAR AND HEXAGONAL CROSS-SECTION BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 1: DEFINITIONS, DESIGNATIONS AND GENERAL REQUIREMENTS |
| S.R. CEN/TR 15353:2007 | PLASTICS - RECYCLED PLASTICS - GUIDELINES FOR THE DEVELOPMENT OF STANDARDS FOR RECYCLED PLASTICS |
| ISO 16620-1:2015 | Plastics Biobased content Part 1: General principles |
| ISO 15874-1:2013 | Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 1: General |
| I.S. EN ISO 16396-1:2015 | PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM, MARKING OF PRODUCTS AND BASIS FOR SPECIFICATIONS (ISO 16396-1:2015) |
| ISO 1043-1:2011 | Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics |
| ISO 30012:2016 | Carbon-fibre-reinforced plastics Determination of the size and aspect ratio of crushed objects |
| ISO 18437-4:2008 | Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 4: Dynamic stiffness method |
| SAE AMS 2950/1 : 2008(R2019) | PASTE ADHESIVE FOR CORE RESTORATION - PART 1: GENERAL REQUIREMENTS |
| 17/30363915 DC : 0 | BS EN 131-6 - LADDERS - PART 6: TELESCOPIC LADDERS |
| UNE-EN ISO 1183-1:2013 | Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012) |
| BIS IS 13774 : 2014 | LIVE WORKING - GLOVES OF INSULATING MATERIAL |
| EN ISO 178:2010/A1:2013 | PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013) |
| EN ISO 13000-2:2005 | Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:2005) |
| ISO 1452-1:2009 | Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure Unplasticized poly(vinyl chloride) (PVC-U) Part 1: General |
| ISO 17422:2002 | Plastics Environmental aspects General guidelines for their inclusion in standards |
| ISO 16014-1:2012 | Plastics Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography Part 1: General principles |
| ISO 16525-8:2014 | Adhesives Test methods for isotropic electrically conductive adhesives Part 8: Electrochemical-migration test methods |
| I.S. EN ISO 15877-1:2009 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 1: GENERAL |
| DIN EN 131-6 E : 2015 | LADDERS - PART 6: TELESCOPIC LADDERS |
| I.S. EN 15857:2010 | NON-DESTRUCTIVE TESTING - ACOUSTIC EMISSION - TESTING OF FIBRE-REINFORCED POLYMERS - SPECIFIC METHODOLOGY AND GENERAL EVALUATION CRITERIA |
| ISO 1268-8:2004 | Fibre-reinforced plastics — Methods of producing test plates — Part 8: Compression moulding of SMC and BMC |
| I.S. EN ISO 15874-1:2013 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 1: GENERAL (ISO 15874-1:2013) |
| I.S. EN ISO 16664:2017 | GAS ANALYSIS - HANDLING OF CALIBRATION GASES AND GAS MIXTURES - GUIDELINES (ISO 16664:2017) |
| ISO 18437-1:2012 | Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 1: Principles and guidelines |
| ISO 19095-4:2015 | Plastics Evaluation of the adhesion interface performance in plastic-metal assemblies Part 4: Environmental conditions for durability |
| ISO 16525-1:2014 | Adhesives Test methods for isotropic electrically conductive adhesives Part 1: General test methods |
| BS EN ISO 1043-1:2011 | PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMERS AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011) |
| DIN EN 12006-2:2009-08 | NON ACTIVE SURGICAL IMPLANTS - PARTICULAR REQUIREMENTS FOR CARDIAC AND VASCULAR IMPLANTS - PART 2: VASCULAR PROSTHESES INCLUDING CARDIAC VALVE CONDUITS |
| DIN EN ISO 10931:2015-11 | PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLY(VINYLIDENE FLUORIDE) (PVDF) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM (ISO 10931:2005 + AMD 1:2015) |
| DIN EN ISO 1172:1998-12 | Textile glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods (ISO 1172:1996) |
| DIN EN 1401-1:2009-07 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| DIN EN 12200-1:2016-10 | PLASTICS RAINWATER PIPING SYSTEMS FOR ABOVE GROUND EXTERNAL USE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| BS EN 12654-3:1999 | Textile glass. Yarns General requirements for general applications |
| BS EN 13002-2:1999 | Carbon fibre yarns Test methods and general specifications |
| UNE-EN 13245-1:2011 | Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 1: Designation of PVC-U profiles |
| ISO 6401:2008 | Plastics — Poly(vinyl chloride) — Determination of residual vinyl chloride monomer — Gas-chromatographic method |
| BS EN 13887:2003 | Structural adhesives. Guidelines for surface preparation of metals and plastics prior to adhesive bonding |
| ISO 11339:2010 | Adhesives T-peel test for flexible-to-flexible bonded assemblies |
| BS EN 61212-3-2:2013 | Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes Specifications for individual materials. Sheet 2: Round laminated moulded tubes |
| BS EN ISO 14529-1:2000 | Plastics. Melamine/phenolic powder moulding compounds (MP-PMCs) Designation system and basis for specifications |
| BS EN 1452-1 : 2000 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL |
| BS EN ISO 10365:1995 | Adhesives. Designation of main failure patterns |
| BS EN ISO 10931 : 2005 | PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLY(VINYLIDENE FLUORIDE) (PVDF) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM |
| ISO 11357-7:2015 | Plastics Differential scanning calorimetry (DSC) Part 7: Determination of crystallization kinetics |
| BS EN 15343:2007 | Plastics. Recycled plastics. Plastics recycling traceability and assessment of conformity and recycled content |
| I.S. EN 1401-1:2009 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| BS EN 60893-1:2004 | Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Definitions, designations and general requirements |
| ISO 15252-2:1999 | Plastics Epoxy powder moulding compounds (EP-PMCs) Part 2: Preparation of test specimens and determination of properties |
| UNE-EN 12201-1:2012 | Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General |
| BS EN 14447:2005 | Fibre reinforced plastics. Glass mat reinforced thermoplastics (GMT). Determination of flowability and solidification |
| BS EN 13706-1:2002 | Reinforced plastics composites. Specifications for pultruded profiles Designation |
| BS EN ISO 12115:1997 | Fibre-reinforced plastics. Thermosetting moulding compounds and prepregs. Determination of flowability, maturation and shelf life |
| BS EN ISO 15493 : 2003 | PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - ACRYLONITRILE-BUTADIENE-STYRENE (ABS), UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) AND CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM - METRIC SERIES (ISO 15493:2003) |
| BS EN 12575:1998 | Plastics. Thermoset moulding compounds. Determination of the degree of fibre wet out in SMC |
| BS EN ISO 1043-3:2016 | Plastics. Symbols and abbreviated terms Plasticizers |
| BS EN 13360:2002 | Rubber- or plastics-coated fabrics. Terminology |
| BS EN 12971-1:1999 | Reinforcements. Specification for textile glass chopped strands Designation |
| ISO 14527-2:1999 | Plastics Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) Part 2: Preparation of test specimens and determination of properties |
| UNE-EN ISO 15874-1:2013 | Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General (ISO 15874-1:2013) |
| IEC 61111:2009 | Live working - Electrical insulating matting |
| BS EN 61212-1:2006 | Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes Definitions, designations and general requirements |
| ISO 8257-1:1998 | Plastics Poly(methyl methacrylate) (PMMA) moulding and extrusion materials Part 1: Designation system and basis for specifications |
| BS EN 15344:2007 | Plastics. Recycled plastics. Characterization of polyethylene (PE) recyclates |
| BS EN ISO 11409:1998 | Plastics. Phenolic resins. Determination of heats and temperatures of reaction by differential scanning calorimetry |
| ISO 11359-1:2014 | Plastics — Thermomechanical analysis (TMA) — Part 1: General principles |
| BS EN 1565-1:2000 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Styrene copolymer blends (SAN + PVC) Specifications for pipes, fittings and the system |
| BS EN 15346:2014 | Plastics. Recycled plastics. Characterization of poly(vinyl chloride) (PVC) recyclates |
| IEC 61212-3-3:2006 | Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Round laminated moulded rods |
| ISO 10724-1:1998 | Plastics — Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) — Part 1: General principles and moulding of multipurpose test specimens |
| BS EN ISO 11337:2010 | Plastics. Polyamides. Determination of e-caprolactam and w-laurolactam by gas chromatography |
| 03/314451 DC : DRAFT SEP 2003 | IEC 62392 TR ED.1 - SUITABILITY OF TYPICAL ELECTRICAL INSULATING MATERIAL FOR POLYMER RECYCLING |
| BS EN ISO 10724-1:2001 | Plastics. Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) General principles and moulding of multipurpose test specimens |
| BS EN 14598-1:2005 | Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC) Designation |
| BS EN 12971-2:1999 | Reinforcements. Specification for textile glass chopped strands Test methods and general requirements |
| BS EN ISO 14530-2:2000 | Plastics. Unsaturated-polyester powder moulding compounds (UP-PMCs) Preparation of test specimens and determination of properties |
| BS EN ISO 15252-2:2000 | Plastics. Epoxy powder moulding compounds (EP-PMCs) Preparation of test specimens and determination of properties |
| ISO 16664:2017 | Gas analysis — Handling of calibration gases and gas mixtures — Guidelines |
| ISO 2078:1993 | Textile glass Yarns Designation |
| ISO 14527-1:1999 | Plastics Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) Part 1: Designation system and basis for specifications |
| BS EN ISO 14530-1:2000 | Plastics. Unsaturated-polyester powder moulding compounds (UP-PMCs) Designation system and basis for specifications |
| CEN ISO/TR 27165:2012 | Thermoplastics piping systems - Guidance for definitions of wall constructions for pipes (ISO/TR 27165:2012) |
| EN 12200-1:2016 | Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system |
| ONORM EN ISO 13000-1 : 2006 | PLASTICS - POLYTETRAFLUOROETHYLENE (PTFE) SEMI-FINISHED PRODUCTS - PART 1: REQUIREMENTS AND DESIGNATION |
| CEN ISO/TR 22007-5:2014 | Plastics - Determination of thermal conductivity and thermal diffusivity - Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples (ISO/TR 22007-5:2011) |
| CEN/TS 16011:2013 | Plastics - Recycled plastics - Sample preparation |
| EN ISO 15605:2004 | Adhesives - Sampling (ISO 15605:2000) |
| EN 12971-3:1999 | Reinforcements - Specification for textile glass chopped strands - Part 3: Specific requirements |
| EN 13417-1:2001 | Reinforcement - Specifications for woven fabrics - Part 1: Designation |
| EN 13473-2:2001 | Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 2: Methods of test and general requirements |
| EN 50237:1997 | Gloves and mitts with mechanical protection for electrical purposes |
| EN 62011-1:2002 | Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements |
| CEN/TR 16149:2011 | Guidance Document for drafting CEN/TC 158 Standards |
| DIN EN ISO 12086-2:2006-05 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| DIN EN ISO 13000-2:2006-02 | Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:2005) |
| EN 61212-3-1:2013 | INSULATING MATERIALS - INDUSTRIAL RIGID ROUND LAMINATED TUBES AND RODS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 1: ROUND LAMINATED ROLLED TUBES (IEC 61212-3-1:2013) |
| DIN EN 13417-3:2002-03 | REINFORCEMENT - SPECIFICATIONS FOR WOVEN FABRICS - PART 3: SPECIFIC REQUIREMENTS |
| DIN EN ISO 13000-1:2006-02 | Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation (ISO 13000-1:2005) |
| EN 12654-2:1998 | Textile glass - Yarns - Part 2: Methods of test and general specifications |
| EN 131-2:2010+A2:2017 | Ladders - Part 2: Requirements, testing, marking |
| DIN EN ISO 8330:2015-04 | Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:2014) |
| EN 13002-2:1999 | CARBON FIBRE YARNS - PART 2: TEST METHODS AND GENERAL SPECIFICATIONS |
| EN 13421:2006 | Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites |
| EN 13003-2:1999 | Para-aramid fibre filament yarns - Part 2: Methods of test and general specifications |
| EN 60893-1:2004 | Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements |
| EN 13245-1:2010 | Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 1: Designation of PVC-U profiles |
| EN 60903 : 2003 COR 2005 | LIVE WORKING - GLOVES OF INSULATING MATERIAL |
| EN 61212-1:2006 | Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements |
| CEN/TR 15438:2007 | Plastics piping systems - Guidance for coding of products and their intended uses |
| DIN EN ISO 15750-3:2008-09 | Packaging - Steel drums - Part 3: Inserted flange-type closure systems (ISO 15750-3:2002) |
| UNE-EN 12666-1:2006 | Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system |
| BS 2782-3.345A(1993) : 1993 AMD 8637 | METHODS OF TESTING PLASTICS - MECHANICAL PROPERTIES - DETERMINATION OF COMPRESSIVE PROPERTIES |
| UNE-EN 16153:2013 | Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods |
| ISO 15850:2014 | Plastics Determination of tension-tension fatigue crack propagation Linear elastic fracture mechanics (LEFM) approach |
| ISO 1139:1973 | Textiles — Designation of yarns |
| ISO 974:2000 | Plastics Determination of the brittleness temperature by impact |
| ISO 294-3:2002 | Plastics Injection moulding of test specimens of thermoplastic materials Part 3: Small plates |
| ISO 14021:2016 | Environmental labels and declarations — Self-declared environmental claims (Type II environmental labelling) |
| AS 1337.0:2020 | Personal protective equipment Eye and face protection - Vocabulary |
| ISO 4587:2003 | Adhesives Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies |
| ISO 294-2:1996 | Plastics Injection moulding of test specimens of thermoplastic materials Part 2: Small tensile bars |
| ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
| ISO 294-1:2017 | Plastics — Injection moulding of test specimens of thermoplastic materials — Part 1: General principles, and moulding of multipurpose and bar test specimens |
| ISO 13586:2000 | Plastics Determination of fracture toughness (GIC and KIC) Linear elastic fracture mechanics (LEFM) approach |
| ISO 6601:2002 | Plastics — Friction and wear by sliding — Identification of test parameters |
£39.00
Excluding VAT
GBP
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - Russian
PDF - Russian
PDF 3 Users - Russian
PDF 5 Users - Russian
PDF 9 Users - Russian
Hardcopy - English - French
PDF - English - French
PDF 3 Users - English - French
PDF 5 Users - English - French
PDF 9 Users - English - French
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - Russian
PDF - Russian
PDF 3 Users - Russian
PDF 5 Users - Russian
PDF 9 Users - Russian
Hardcopy - English - French
PDF - English - French
PDF 3 Users - English - French
PDF 5 Users - English - French
PDF 9 Users - English - French
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.