• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ISO 4892-2:2013

Current

Current

The latest, up-to-date edition.

Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps

Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English, French

Published date

28-02-2013

ISO 4892-2:2013 specifies methods for exposing specimens to xenon-arc light in the presence of moisture to reproduce the weathering effects (temperature, humidity and/or wetting) that occur when materials are exposed in actual end-use environments to daylight or to daylight filtered through window glass.

Committee
ISO/TC 61/SC 6
DevelopmentNote
Supersedes ISO 4892 (04/2001) Supersedes ISO/DIS 4892-2. (03/2013)
DocumentType
Standard
Pages
13
PublisherName
International Organization for Standardization
Status
Current
Supersedes

I.S. EN 16434:2014 INTERNAL BLINDS - PROTECTION FROM STRANGULATION HAZARDS - REQUIREMENTS AND TEST METHODS FOR SAFETY DEVICES
DIN EN 10245-5:2012-01 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE
07/30168088 DC : DRAFT AUG 2007 BS EN 13341 AMD 1 - THERMOPLASTICS STATIC TANKS FOR ABOVE GROUND STORAGE OF DOMESTIC HEATING OILS, KEROSENE AND DIESEL FUELS - BLOW MOULDED POLYETHYLENE, ROTATIONALLY MOULDED POLYETHYLENE AND POLYAMIDE 6 BY ANIONIC POLYMERIZATION TANKS - REQUIREMENTS AND TEST METHODS
UNE-EN 50620:2017 Electric cables - Charging cables for electric vehicles
PD CEN/TS 16599:2014 Photocatalysis. Irradiation conditions for testing photocatalytic properties of semiconducting materials and the measurement of these conditions
DIN EN ISO 19712-2:2013-04 Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007)
02/103631 DC : DRAFT MAY 2002 BS EN 14471 - CHIMNEYS - REQUIREMENTS AND TEST METHODS FOR SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS
15/30313602 DC : 0 BS ISO 25649-7 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 7: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS E DEVICES
BS EN ISO 8936:2017 Awnings for leisure accommodation vehicles. Requirements and test methods
11/30213807 DC : 0 BS ISO 14486 - LAMINATE FLOOR COVERINGS - LAMINATE FLOOR COVERING - SPECIFICATION
14/30303794 DC : 0 BS EN 438-2 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
06/30153650 DC : DRAFT JULY 2006 EN 61914 - CABLE CLEATS FOR ELECTRICAL INSTALLATIONS
DIN EN 15752-1:2014-10 GLASS IN BUILDING - ADHESIVE BACKED POLYMERIC FILM - PART 1: DEFINITIONS AND REQUIREMENTS
PREN 17142 : DRAFT 2017 MODULAR MULTILAYER FLOOR COVERINGS - ELEMENTS WITH A WOOD POWDER BASED SURFACE LAYER - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS
04/30113782 DC : DRAFT MAY 2004 ISO 3865 - RUBBER, VULCANIZED OR THERMOPLASTIC - METHODS OF TEST FOR STAINING IN CONTACT WITH ORGANIC MATERIAL
DIN EN ISO 8936:2015-09 (Draft) AWNINGS FOR LEISURE ACCOMMODATION VEHICLES - REQUIREMENTS AND TEST METHODS (ISO 8936:2017)
PREN 438-2 : DRAFT 2014 HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
BS EN 15651-2:2017 Sealants for non-structural use in joints in buildings and pedestrian walkways Sealants for glazing
ISO 19821:2017 Determination of span rating for natural fibre-reinforced plastic composite (NFC) deck boards
DIN EN 15534-5:2014-04 COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 5: SPECIFICATIONS FOR CLADDING PROFILES AND TILES
12/30266874 DC BS EN 1871. Road marking materials. Paint, thermoplastic and cold plastic materials. Specifications
16/30337938 DC : 0 BS EN 80005-1 - UTILITY CONNECTIONS IN PORT - HIGH VOLTAGE SHORE CONNECTION (HVSC) SYSTEMS - PART 1: GENERAL REQUIREMENTS
BS ISO 19712-3 : 2007 PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 3: DETERMINATION OF PROPERTIES - SOLID SURFACE SHAPES
DIN EN ISO 29664 E : 2017 PLASTICS - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION (ISO 29664:2010)
BS EN 61969-3:2012 Mechanical structures for electronic equipment. Outdoor enclosures Environmental requirements, tests and safety aspects
16/30342057 DC : 0 BS EN 17033 - PLASTICS - BIODEGRADABLE MULCH FILMS FOR USE IN AGRICULTURE AND HORTICULTURE - REQUIREMENTS AND TEST METHODS
03/319410 DC : DRAFT NOV 2003 BS EN 14836 - SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - METHOD OF TEST - ARTIFICIAL WEATHERING
BS ISO 11798:1999 Information and documentation. Permanence and durability of writing, printing and copying on paper. Requirements and test methods
I.S. EN ISO 105-B10:2011 TEXTILES - TESTS FOR COLOUR FASTNESS - PART B10: ARTIFICIAL WEATHERING - EXPOSURE TO FILTERED XENON-ARC RADIATION (ISO 105-B10:2011)
I.S. EN IEC 62561-6:2018 COR 2018 LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 6: REQUIREMENTS FOR LIGHTNING STRIKE COUNTERS (LSC)
05/30133040 DC : DRAFT APR 2005 BS EN 1866 - MOBILE FIRE EXTINGUISHERS
14/30310352 DC : 0 BS EN 12200-1 - PLASTICS RAINWATER PIPING SYSTEMS FOR ABOVE GROUND EXTERNAL USE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
BS ISO/IEC 11801-1:2017 Information technology. Generic cabling for customer premises General requirements
DIN EN ISO 19712-2 E : 2013 PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 2: DETERMINATION OF PROPERTIES - SHEET GOODS (ISO 19712-2:2007)
11/30229694 DC : 0 BS EN ISO 11997-2 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT
13/30263803 DC : 0 BS ISO 17296-4 - ADDITIVE MANUFACTURING - RAPID TECHNOLOGIES (RAPID PROTOTYPING) - PART 4: DATA PROCESSING
ASTM D 5071 : 2006 Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus
UNE-EN ISO 19712-2:2013 Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007)
ISO 3917:2016 Road vehicles Safety glazing materials Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering
I.S. EN 62561-4:2017 LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 4: REQUIREMENTS FOR CONDUCTOR FASTENERS
S.R. CEN/TS 16359:2012 PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF KNOT STAINING RESISTANCE OF WOOD COATINGS
DIN EN 124-6:2015-09 GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 6: GULLY TOPS AND MANHOLE TOPS MADE OF POLYPROPYLENE (PP), POLYETHYLENE (PE) OR UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U)
PREN 62275 : DRAFT 2014 CABLE MANAGEMENT SYSTEMS - CABLE TIES FOR ELECTRICAL INSTALLATIONS (IEC 62275:2013, MODIFIED)
ISO 9370:2017 Plastics — Instrumental determination of radiant exposure in weathering tests — General guidance and basic test method
DIN ISO 16938-1:2012-12 BUILDING CONSTRUCTION - DETERMINATION OF THE STAINING OF POROUS SUBSTRATES BY SEALANTS USED IN JOINTS - PART 1: TEST WITH COMPRESSION (ISO 16938-1:2008)
BS ISO 11617:2014 Buildings and civil engineering works. Sealants. Determination of changes in cohesion and appearance of elastic weatherproofing sealants after exposure of statically cured specimens to artificial weathering and mechanical cycling
I.S. EN 15534-4:2014 COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 4: SPECIFICATIONS FOR DECKING PROFILES AND TILES
BS EN ISO 30013:2011 Rubber and plastics hoses. Methods of exposure to laboratory light sources. Determination of changes in colour, appearance and other physical properties
BS EN 15752-1:2014 Glass in building. Adhesive backed polymeric film Definitions and requirements
BS EN 50526-1:2012 Railway applications. Fixed Installations. D.C. surge arresters and voltage limiting devices Surge arresters
15/30328730 DC : 0 BS EN 60794-1-22 - OPTICAL FIBRE CABLES - PART 1-22: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - ENVIRONMENTAL TEST METHODS
17/30351022 DC : 0 BS EN 14836 - SURFACES FOR SPORTS AREAS - SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - TEST METHOD FOR THE DETERMINATION OF THE RESISTANCE TO EXPOSURE TO ULTRA VIOLET LIGHT ARTIFICIAL WEATHERING
I.S. EN 60079-0:2012 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011 (MOD))
04/19987165 DC : DRAFT SEP 2004 BS EN 13200-4 - SPECTATOR FACILITIES - PART 4: SEATS - PRODUCT REQUIREMENTS
BS EN 60794-1-22:2012 Optical fibre cables Generic specification. Basic optical cable test procedures. Environmental test methods
EN 60079-30-1:2017 Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements
ISO 3865:2005 Rubber, vulcanized or thermoplastic Methods of test for staining in contact with organic material
12/30238119 DC : 0 BS ISO 18937 - IMAGING MATERIALS - PHOTOGRAPHIC REFLECTION PRINTS - METHODS FOR MEASURING INDOOR LIGHT STABILITY
08/30194268 DC : 0 BS EN 61439-5 - LOW-VOLTAGE SWITCHGEAR AND CONTROL GEAR ASSEMBLIES - PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS
01/107289 DC : DRAFT OCT 2001 BS XXXX - SPECIFICATION FOR THE TESTING AND PERFORMANCE OF MICROPRISMATIC RETROREFLECTIVE SHEETING MATERIALS
DIN EN 14963 E : 2006 ROOF COVERINGS - CONTINUOUS ROOFLIGHTS OF PLASTICS WITH OR WITHOUT UPSTANDS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS
I.S. EN 17098-1:2018 PLASTICS - BARRIER FILMS FOR AGRICULTURAL AND HORTICULTURAL SOIL DISINFECTION BY FUMIGATION - PART 1: SPECIFICATIONS FOR BARRIER FILMS
DIN EN 13245-3 E : 2010 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES
BS 2782-5.540F(1995) : AMD 10678 METHODS OF TESTING PLASTICS - OPTICAL AND COLOUR PROPERTIES, WEATHERING - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - FLUORESCENT UV LAMPS
96/709570 DC : DRAFT JUL 1996 PREN 10285 - STEEL TUBES AND FITTINGS FOR ON AND OFFSHORE PIPELINES - EXTERNAL THREE LAYER EXTRUDED POLYETHYLENE BASED COATINGS
BS IEC 62790 : 2014 JUNCTION BOXES FOR PHOTOVOLTAIC MODULES - SAFETY REQUIREMENTS AND TESTS
PREN 12574-2 : DRAFT 2015 STATIONARY WASTE CONTAINERS - PART 2: PERFORMANCE REQUIREMENTS AND TEST METHODS
CEI EN 62561-6 : 2012 LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 6: REQUIREMENTS FOR LIGHTNING STRIKE COUNTERS (LSC)
09/30197921 DC : 0 BS EN 62561-4 ED1 - REQUIREMENTS FOR LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 4: REQUIREMENTS FOR FASTENERS
UNI EN 15836-2 : 2010 PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 2: REINFORCED MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 1,5 MM
12/30192217 DC BS ISO 12856. Plastic railway sleepers (railroad ties)
BS EN 513:1999 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors. Determination of the resistance to artificial weathering
CEI EN 60335-2-109 : 2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-109: PARTICULAR REQUIREMENTS FOR UV RADIATION WATER TREATMENT APPLIANCES
15/30323520 DC : 0 BS EN 12574-2 - STATIONARY WASTE CONTAINERS - PART 2: PERFORMANCE REQUIREMENTS AND TEST METHODS
PD CEN ISO/TR 18486:2017 Plastics. Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance
ANSI INCITS 322 : 2015 INFORMATION TECHNOLOGY - CARD DURABILITY TEST METHODS
BS ISO 16938-2:2008 Building construction. Determination of the staining of porous substrates by sealants used in joints Test without compression
09/30196635 DC : 0 BS EN 60092-510 - ELECTRICAL INSTALLATIONS IN SHIPS - SPECIAL FEATURES - HIGH VOLTAGE SHORE CONNECTION SYSTEMS (HVSC-SYSTEMS)
CSA C22.2 No. 62109-1 : 2016 SAFETY OF POWER CONVERTERS FOR USE IN PHOTOVOLTAIC POWER SYSTEMS - PART 1: GENERAL REQUIREMENTS
08/30186166 DC : DRAFT JULY 2008 BS EN 62275 - CABLE MANAGEMENT SYSTEMS - CABLE TIES FOR ELECTRICAL INSTALLATIONS
UNI EN 16240 : 2014 LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
UNE 56875:2014 Kitchen furniture. Specifications, requirements, and test methods.
CSA C22.2 No. 60079.0 : 2015 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
UNI EN 15649-7 : 2010 FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 7: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS E DEVICES
I.S. EN 61914:2016 CABLE CLEATS FOR ELECTRICAL INSTALLATIONS
UNI EN ISO 16474-2 : 2014 PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 2: XENON-ARC LAMPS
BS ISO 5912 : 2003 AMD 15519 CAMPING TENTS
09/30176542 DC : 0 BS EN ISO 30013 - RUBBER AND THERMOPLASTICS HOSES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - DETERMINATION OF CHANGES IN COLOUR, APPEARANCE AND OTHER PHYSICAL PROPERTIES
09/30179580 DC : 0 BS EN ISO 29664 - PLASTICS - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION
13/30263186 DC : 0 BS EN 3-8 - PORTABLE FIRE EXTINGUISHERS - PART 8: REQUIREMENTS FOR THE CONSTRUCTION, PRESSURE RESISTANCE AND MECHANICAL TESTS FOR EXTINGUISHERS, WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR, WHICH COMPLY WITH THE REQUIREMENTS OF EN 3-7
CAN/CSA-C22.2 NO. 60079-30-1:17 Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements (Adopted IEC/IEEE 60079-30-1:2015, first edition, 2015-09, with Canadian deviations)
CSA C22.2 No. 18.1 : 2013 : INC : UPD 1 : 2015 METALLIC OUTLET BOXES
ISO 4665:2016 Rubber, vulcanized or thermoplastic — Resistance to weathering
EN 61439-1:2011 Low-voltage switchgear and controlgear assemblies - Part 1: General rules
UNE 199051-1:2012 Road traffic management equipment. Variable message signs. Part 1: Equipment and functional specification
UNE-EN 50467:2012 Railway applications - Rolling stock - Electrical connectors, requirements and test methods
I.S. EN 61969-3:2012 MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - OUTDOOR ENCLOSURES - PART 3: ENVIRONMENTAL REQUIREMENTS, TESTS AND SAFETY ASPECTS (IEC 61969-3:2011 (EQV))
BS EN 62368-1 : 2014 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
EN IEC 60068-2-5:2018 Environmental testing - Part 2-5: Tests - Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering
EN IEC 60099-8:2018 Surge arresters - Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV
I.S. EN 16281:2013 CHILD PROTECTIVE PRODUCTS - CONSUMER FITTED CHILD RESISTANT LOCKING DEVICES FOR WINDOWS AND BALCONY DOORS - SAFETY REQUIREMENTS AND TEST METHODS
I.S. EN 62109-1:2010 SAFETY OF POWER CONVERTERS FOR USE IN PHOTOVOLTAIC POWER SYSTEMS - PART 1: GENERAL REQUIREMENTS
I.S. 355:2006 SPECIFICATION FOR HELMETS FOR HURLING AND CAMOGIE PLAYERS
CEI EN 50526-1 : 2013 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 1: SURGE ARRESTERS
I.S. EN 513:1999 UNPLASTICIZED POLYVINYLCHLORIDE (PVC-U) PROFILES FOR THE FABRICATION OF WINDOWS AND DOORS - DETERMINATION OF THE RESISTANCE TO ARTIFICIAL WEATHERING
I.S. EN 50289-4-17:2015 COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 4-17: TEST METHODS FOR UV RESISTANCE EVALUATION OF THE SHEATH OF ELECTRICAL AND OPTICAL FIBRE CABLE
CEI EN 61643-11 : 2014 LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 11: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER SYSTEMS - REQUIREMENTS AND TEST METHODS
ISO 11963:2012 Plastics Polycarbonate sheets Types, dimensions and characteristics
EN 50620:2017 Electric cables - Charging cables for electric vehicles
BS EN 50539-11 : 2013 LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS
I.S. EN 62852:2015 CONNECTORS FOR DC-APPLICATION IN PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS
I.S. EN 50618:2014 ELECTRIC CABLES FOR PHOTOVOLTAIC SYSTEMS
I.S. EN 50467:2011 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
I.S. EN 15836-2:2010 PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 2: REINFORCED MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 1,5 MM
I.S. EN 60794-3-70:2016 OPTICAL FIBRE CABLES - PART 3-70: OUTDOOR CABLES - FAMILY SPECIFICATION FOR OUTDOOR OPTICAL FIBRE CABLES FOR RAPID/MULTIPLE DEPLOYMENT
I.S. EN 50620:2017 ELECTRIC CABLES - CHARGING CABLES FOR ELECTRIC VEHICLES
BS EN 16153 : 2013 LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
IEC 60335-2-40:2018 Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
UNE-EN 15649-7:2010 Floating leisure articles for use on and in the water - Part 7: Additional specific safety requirements and test methods for class E devices
BS EN 50548 : 2011 JUNCTION BOXES FOR PHOTOVOLTAIC MODULES
ISO 28278-1:2011 Glass in building — Glass products for structural sealant glazing — Part 1: Supported and unsupported monolithic and multiple glazing
UNI ISO 11798 : 2011 INFORMATION AND DOCUMENTATION - PERMANENCE AND DURABILITY OF WRITING, PRINTING AND COPYING ON PAPER - REQUIREMENTS AND TEST METHODS
I.S. EN 50548:2011 JUNCTION BOXES FOR PHOTOVOLTAIC MODULES
ISO 14486:2012 Laminate floor coverings — Specification
IEC 62561-4:2010 Lightning protection system components (LPSC) - Part 4: Requirements for conductor fasteners
UNE-EN 60099-4:2016 Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems
SAE J 2527 : 2017 PERFORMANCE BASED STANDARD FOR ACCELERATED EXPOSURE OF AUTOMOTIVE EXTERIOR MATERIALS USING A CONTROLLED IRRADIANCE XENON-ARC APPARATUS
15/30324370 DC : 0 BS EN 3-8 - PORTABLE FIRE EXTINGUISHERS - PART 8: REQUIREMENTS FOR THE CONSTRUCTION, PRESSURE RESISTANCE AND MECHANICAL TESTS FOR EXTINGUISHERS WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR, WHICH COMPLY WITH THE REQUIREMENTS OF EN 3-7
UNE-EN ISO 30013:2012 Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties (ISO 30013:2011)
IEC PAS 60092-510:2009 Electrical installations in ships - Part 510: Special features - High-voltage shore connection systems
UNE-EN 15534-5:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles
CSA C22.2 No. 61730-1 : 2011 : INC : AMD 2 : 2015 : R2016 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
NF ISO 10966 : 2011 SPORTS AND RECREATIONAL EQUIPMENT - FABRICS FOR AWNINGS - SPECIFICATION
CSA C22.2 No. 61730-1 : 2011 : INC : AMD 1 : 2013 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
I.S. EN 14963:2006 ROOF COVERINGS - CONTINUOUS ROOFLIGHTS OF PLASTICS WITH OR WITHOUT UPSTANDS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS
I.S. EN 13655:2018 PLASTICS - THERMOPLASTIC MULCH FILMS RECOVERABLE AFTER USE, FOR USE IN AGRICULTURE AND HORTICULTURE
ASTM D 5592 : 1994 Standard Guide for Material Properties Needed in Engineering Design Using Plastics
EN 15534-6:2015+A1:2017 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 6: Specifications for fencing profiles and elements
IEC TR 62039:2007 Selection guide for polymeric materials for outdoor use under HV stress
EN 13206:2017 Plastics - Thermoplastic covering films for use in agriculture and horticulture
I.S. EN ISO 11963:2012 PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS (ISO 11963:2012)
EN 60950-22:2017 Information technology equipment - Safety - Part 22: Equipment to be installed outdoors
CSA C22.2 No. 62368-1 : 2014 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
DIN EN 13341:2011-04 Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 - Requirements and test methods (includes Amendment A1:2011)
DIN EN 12574-2:2015-08 (Draft) STATIONARY WASTE CONTAINERS - PART 2: PERFORMANCE REQUIREMENTS AND TEST METHODS
DIN EN 14323 E : 2017 WOOD-BASED PANELS - MELAMINE FACED BOARDS FOR INTERIOR USES - TEST METHODS
DIN EN 13484:2012-05 Helmets for users of luges
DIN EN 12492:2012-04 MOUNTAINEERING EQUIPMENT - HELMETS FOR MOUNTAINEERS - SAFETY REQUIREMENTS AND TEST METHODS
DIN EN 1078:2014-04 HELMETS FOR PEDAL CYCLISTS AND FOR USERS OF SKATEBOARDS AND ROLLER SKATES
DIN EN ISO 11403-3 E : 2002 PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 3: ENVIRONMENTAL INFLUENCES ON PROPERTIES (ISO 11403-3:2014)
UNE-EN 12200-1:2017 Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
BS EN 12574-2:2017 Stationary waste containers Performance requirements and test methods
BS EN ISO 12402-7 : 2007 PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS
BS EN 10288:2002 Steel tubes and fittings for onshore and offshore pipelines. External two layer extruded polyethylene based coatings
BS EN ISO 5674:2009 Tractors and machinery for agriculture and forestry. Guards for power take-off (PTO) drive-shafts. Strength and wear tests and acceptance criteria
UNE-EN 671-2:2013 Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose
UNE-EN 13575:2012 Static thermoplastic tanks for the above ground storage of chemicals — Blow moulded or rotationally moulded polyethylene tanks — Requirements and test methods
BS EN 14323:2017 Wood-based panels. Melamine faced boards for interior uses. Test methods
IEC 62752:2016 In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD)
ISO 12402-7:2006 Personal flotation devices Part 7: Materials and components Safety requirements and test methods
BS IEC 62852 : 2014 CONNECTORS FOR DC-APPLICATION IN PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS
BS EN 1873 : 2014 PREFABRICATED ACCESSORIES FOR ROOFING - INDIVIDUAL ROOFLIGHTS OF PLASTICS - PRODUCT SPECIFICATION AND TEST METHODS
UNE-ISO 4141-1:2016 Road vehicles. Multi-core connecting cables. Part 1: Test methods and requirements for basic performance sheathed cables
BS EN 13484:2012 Helmets for users of luges
DIN EN 15200:2007-08 SANITARY APPLIANCES - MULTIFUNCTION SHOWER CABINETS
BS EN 14628:2005 Ductile iron pipes, fittings and accessories. External polythene coating for pipes. Requirements and test methods
BS EN 966 : 2012 HELMETS FOR AIRBORNE SPORTS
BS EN ISO 9142:2003 Adhesives. Guide to the selection of standard laboratory ageing conditions for testing bonded joints
BS EN 12492:2012 Mountaineering equipment. Helmets for mountaineers. Safety requirements and test methods
BS EN ISO 11403-3:2014 Plastics. Acquisition and presentation of comparable multipoint data Environmental influences on properties
BS EN 1384:2017 Helmets for equestrian activities
I.S. EN 10223-7:2012 STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 7: STEEL WIRE WELDED PANELS FOR FENCING
I.S. EN ISO 7823-1:2003 PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: CAST SHEETS
EN 60099-4:2014 Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems
IEC 60335-2-40:2018 RLV Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
EN 1078:2012+A1:2012 Helmets for pedal cyclists and for users of skateboards and roller skates
EN 13575:2012 Static thermoplastic tanks for the above ground storage of chemicals — Blow moulded or rotationally moulded polyethylene tanks — Requirements and test methods
EN 10223-8:2013 Steel wire and wire products for fencing and netting - Part 8: Welded mesh gabion products
EN 10223-7:2012 Steel wire and wire products for fencing and netting - Part 7: Steel wire welded panels for fencing
EN ISO 5674:2009 Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria (ISO 5674:2004, corrected version 2005-07-01)
EN 62208:2011 Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements
EN 12676-2 : 2000 ANTI-GLARE SYSTEMS FOR ROADS - PART 2: TEST METHODS
EN 10223-3:2013 Steel wire and wire products for fencing and netting - Part 3: Hexagonal steel wire mesh products for civil engineering purposes
CEN/TR 581-4:2005 OUTDOOR FURNITURE - SEATING AND TABLES FOR CAMPING, DOMESTIC AND CONTRACT USE - PART 4: REQUIREMENTS AND TEST METHODS FOR DURABILITY UNDER THE INFLUENCE OF CLIMATIC CONDITIONS
EN 50164-4:2008 Lightning Protection Components (LPC) - Part 4: Requirements for conductor fasteners
DIN ISO 10966:2012-02 SPORTS AND RECREATIONAL EQUIPMENT - FABRICS FOR AWNINGS - SPECIFICATION (ISO 10966:2011)
EN 10245-1:2011 Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules
EN 124-6:2015 Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U)
CEN/TS 15534-1:2007 Wood-plastics composites (WPC) - Part 1: Test methods for characterisation of WPC materials and products
EN 10245-2:2011 Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire
EN 12574-2:2017 Stationary waste containers - Part 2: Performance requirements and test methods
EN 50539-11 : 2013 AMD 1 2014 LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS
EN 12899-1:2007 Fixed, vertical road traffic signs - Part 1: Fixed signs
EN 10288:2002 Steel tubes and fittings for onshore and offshore pipelines - External two layer extruded polyethylene based coatings
OVE/ONORM EN 61439-1 : 2012 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES (IEC 61439-1:2011)
EN 60068-2-5:2011 Environmental testing - Part 2-5: Tests - Test Sa: Simulated solar radiation at ground level and guidance for solar radiation testing
EN 10245-3:2011 Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire
EN 1013:2012+A1:2014 LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
EN 10245-5:2011 Steel wire and wire products - Organic coatings on steel wire - Part 5: Polyamide coated wire
EN 13341:2005+A1:2011 Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 - Requirements and test methods
EN 124-5:2015 Gully tops and manhole tops for vehicular and pedestrian areas - Part 5: Gully tops and manhole tops made of composite materials
EN 15534-5:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles
EN 15534-4:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 4: Specifications for decking profiles and tiles
EN 13071 : 2002 SELECTIVE WASTE COLLECTION CONTAINERS - ABOVE-GROUND MECHANICALLY-LIFTED CONTAINERS WITH CAPACITIES FROM 80 L TO 5000 L FOR SELECTIVE COLLECTION OF WASTE
EN 13245-3:2010 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 3: Designation of PVC-UE profiles
EN 60950-1:2006/A2:2013 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005/A2:2013, MODIFIED)
ENV 12224 : 1996 GEOTEXTILES AND GEOTEXTILE RELATED PRODUCTS - DETERMINATION OF THE RESISTANCE TO WEATHERING
EN 50289-4-17:2015 Communication cables - Specifications for test methods - Part 4-17: Test methods for UV resistance evaluation of the sheath of electrical and optical fibre cable
EN 50526-2:2014 Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 2: Voltage limiting devices
NBR 15820 : 2010 BOX FOR ELECTRIC POWER METER - REQUIREMENTS
I.S. EN 13200-4:2006 SPECTATOR FACILITIES - PART 4: SEATS - PRODUCT CHARACTERISTICS
NBR IEC 60079-0 : 2013 ERRATA 2 2016 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
PD IEC/TR 61916:2017 Electrical accessories. Harmonization of general rules
PREN 1871 : DRAFT 2012 ROAD MARKING MATERIALS - PAINT, THERMOPLASTIC AND COLD PLASTIC MATERIALS - SPECIFICATIONS
UNI EN 15534-5 : 2014 COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 5: SPECIFICATIONS FOR CLADDING PROFILES AND TILES
09/30200407 DC : 0 BS EN 50526-1 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 1: SURGE ARRESTERS
14/30299825 DC : 0 BS EN 50289-4-17 - COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 4-17: TEST METHODS FOR UV RESISTANCE EVALUATION OF THE SHEATH OF ELECTRICAL AND OPTICAL FIBRE CABLE
BS EN 4708-001:2014 Aerospace series. Sleeving, heat-shrinkable, for binding, insulation and identification Technical specification
DIN EN 1866:2006-03 MOBILE FIRE EXTINGUISHERS
DIN EN 15649-7:2010-04 FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 7: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS E DEVICES
07/30166797 DC : 0
13/30277104 DC : 0 BS EN 14389-1 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS
DD ISO/TS 13434:2008 Geosynthetics. Guidelines for the assessment of durability
15/30317639 DC : 0 BS ISO 6804 - RUBBER AND PLASTICS INLET HOSES AND HOSE ASSEMBLIES FOR WASHING-MACHINES AND DISHWASHERS - SPECIFICATION
PD ISO/TS 19022:2016 Plastics. Method of controlled acceleration of laboratory weathering by increased irradiance
I.S. EN 15651-2:2017 SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 2: SEALANTS FOR GLAZING
UNE-EN 15836-1:2010 Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm
IEC 60950-22 REDLINE : 2ED 2016 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 22: EQUIPMENT TO BE INSTALLED OUTDOORS
95/102726 DC : DRAFT MARCH 1995 PREN 1873 - PREFABRICATED ACCESSORIES FOR ROOFING - INDIVIDUAL ROOFLIGHTS OF PLASTICS WITH UPSTANDS
12/30258456 DC : 0 BS EN 60950-1:2006/FPRAE:2011 - INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
BS EN IEC 60794-1-22:2018 Optical fibre cables Generic specification. Basic optical cable test procedures. Environmental test methods
15/30322585 DC : 0 BS EN ISO 12402-7 - PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS
14/30313367 DC : 0 BS ISO 19862 - BUILDINGS AND CIVIL ENGINEERING WORKS - SEALANTS - DURABILITY TO EXTENSION COMPRESSION CYCLING UNDER ACCELERATED WEATHERING
BS IEC 60092-306:2009 Electrical installations in ships Equipment. Luminaires and lighting accessories
CEI EN 62217 : 2013 POLYMERIC HV INSULATORS FOR INDOOR AND OUTDOOR USE - GENERAL DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA
DIN EN ISO 8936 E : 2017 AWNINGS FOR LEISURE ACCOMMODATION VEHICLES - REQUIREMENTS AND TEST METHODS (ISO 8936:2017)
BS EN 61914:2016 Cable cleats for electrical installations
BS ISO 16938-1:2008 Building construction. Determination of the staining of porous substrates by sealants used in joints Test with compression
ISO 14572:2011 Road vehicles — Round, sheathed, 60 V and 600 V screened and unscreened single- or multi-core cables — Test methods and requirements for basic- and high-performance cables
15/30326957 DC : 0 BS EN 62561-4 ED. 2 - LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 4: REQUIREMENTS FOR CONDUCTOR FASTENERS
BS EN 10223-8:2013 Steel wire and wire products for fencing and netting Welded mesh gabion products
11/30215685 DC : 0 BS EN ISO 15110 - PAINTS AND VARNISHES - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION
PREN 16951-2 : DRAFT 2016 RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS
BS PD ISO/TR 18486 : 2016 PLASTICS - PARAMETERS COMPARING THE SPECTRAL IRRADIANCE OF A LABORATORY LIGHT SOURCE FOR WEATHERING APPLICATIONS TO A REFERENCE SOLAR SPECTRAL IRRADIANCE
14/30243468 DC : 0 BS ISO 3917 - ROAD VEHICLES - SAFETY GLAZING MATERIALS - TEST METHODS FOR RESISTANCE TO RADIATION, HIGH TEMPERATURE, HUMIDITY, FIRE AND SIMULATED WEATHERING
10/30205800 DC : 0 BS ISO 15686-2 - BUILDINGS AND CONSTRUCTED ASSETS - SERVICE LIFE PLANNING - PART 2: SERVICE LIFE PREDICTION PROCEDURES
17/30342148 DC : 0 BS ISO 19821 - DETERMINATION OF SPAN RATING FOR NATURAL FIBER-REINFORCED PLASTIC COMPOSITE (NFC) DECK BOARDS
17/30349217 DC : 0 BS EN ISO 21970-2 - PLASTICS - POLYKETONE (PK) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
UNI EN 15534-4 : 2014 COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 4: SPECIFICATIONS FOR DECKING PROFILES AND TILES
BS EN 1866-2:2014 Mobile fire extinguishers Requirements for the construction, pressure resistance and mechanical tests for extinguishers, with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 1866-1
DIN ISO 16938-1 E : 2012 BUILDING CONSTRUCTION - DETERMINATION OF THE STAINING OF POROUS SUBSTRATES BY SEALANTS USED IN JOINTS - PART 1: TEST WITH COMPRESSION (ISO 16938-1:2008)
09/30194273 DC : 0 BS EN 62208 - EMPTY ENCLOSURES FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS
BS ISO 14572:2011 Road vehicles. Round, sheathed, 60 V and 600 V screened and unscreened single- or multi-core cables. Test methods and requirements for basic- and high-performance cables
09/30209028 DC : 0 BS EN 131-2 - LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING
PREN 14187-8 : DRAFT 2014 COLD APPLIED JOINT SEALANTS - TEST METHODS - PART 8: DETERMINATION OF THE ARTIFICIAL WEATHERING BY UV-IRRADIATION
15/30316094 DC : DRAFT FEB 2015 BS EN 14836 - SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - EXPOSURE TO ARTIFICIAL WEATHERING
BS EN 10245-5:2011 Steel wire and wire products. Organic coatings on steel wire Polyamide coated wire
15/30280950 DC : 0 BS EN ISO 8936 - AWNINGS FOR LEISURE ACCOMMODATION VEHICLES - REQUIREMENTS AND TEST METHODS
DIN EN ISO 105-B10:2012-01 Textiles - Tests for colour fastness - Part B10: Artificial weathering - Exposure to filtered xenon-arc radiation (ISO 105-B10:2011)
03/301511 DC : DRAFT JAN 2003 ISO 4141-1 - ROAD VEHICLES - MULTICORE CONNECTING CABLES - PART 1: TEST METHODS AND REQUIREMENTS FOR BASIC PERFORMANCE SHEATHED CABLES
ISO 11617:2014 Buildings and civil engineering works Sealants Determination of changes in cohesion and appearance of elastic weatherproofing sealants after exposure of statically cured specimens to artificial weathering and mechanical cycling
13/30277107 DC : 0 BS EN 14389-2 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS
BS EN 50526-2:2014 Railway applications. Fixed installations. D.C. surge arresters and voltage limiting devices Voltage limiting devices
16/30317340 DC : 0 BS EN 14932 - PLASTICS - STRETCH THERMOPLASTIC FILMS FOR WRAPPING SILAGE BALES - REQUIREMENTS AND TEST METHODS, CONDITIONS OF USE AND REMOVAL
BS ISO 2135:2017 Anodizing of aluminium and its alloys. Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light
BS EN 15534-5:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) Specifications for cladding profiles and tiles
11/30246708 DC : 0 BS EN 62561-6 - LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 6: REQUIREMENTS FOR LIGHTNING STRIKE COUNTERS (LSC)
BS EN 62561-4:2017 Lightning protection system components (LPSC) Requirements for conductor fasteners
UNI EN 16434 : 2014 INTERNAL BLINDS - PROTECTION FROM STRANGULATION HAZARDS - REQUIREMENTS AND TEST METHODS FOR SAFETY DEVICES
BS ISO 19712-2 : 2007 PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 2: DETERMINATION OF PROPERTIES - SHEET GOODS
10/30212519 DC : 0 BS ISO 10966 - SPORTS AND RECREATIONAL EQUIPMENT - FABRICS FOR AWNINGS - SPECIFICATION
07/30127278 DC : 0 BS ISO 9370 - PLASTICS - INSTRUMENTAL DETERMINATION OF RADIANT EXPOSURE IN WEATHERING TESTS - GENERAL GUIDANCE AND BASIC TEST METHOD
PREN 14389-2 : DRAFT 2013 ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS
14/30310323 DC : 0 BS EN 62275 - CABLE MANAGEMENT SYSTEMS - CABLE TIES FOR ELECTRICAL INSTALLATIONS
02/565097 DC : DRAFT DEC 2002 BS ISO 17398 - SAFETY COLOURS AND SAFETY SIGNS - DURABILITY OF SAFETY SIGNS
10/30233680 DC : 0 BS EN 13575 - STATIC THERMOPLASTIC TANKS FOR THE ABOVE GROUND STORAGE OF CHEMICALS - BLOW MOULDED OR ROTATIONALLY MOULDED POLYETHYLENE TANKS - REQUIREMENTS AND TEST METHODS
07/30154920 DC : 0 BS ISO 7165 - FIRE FIGHTING - PORTABLE FIRE EXTINGUISHERS - PERFORMANCE AND CONSTRUCTION
06/30147348 DC : DRAFT MAR 2006 ISO 19712-3 - PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 3: DETERMINATION OF PROPERTIES - SOLID SURFACE SHAPES
CEI EN 50467 : 2013 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
BS EN 62208:2011 Empty enclosures for low-voltage switchgear and controlgear assemblies. General requirements
09/30167595 DC : 0 BS EN 60099-8 ED.1 - SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV
08/30181781 DC : DRAFT JULY 2008 BS EN 15836-2 - PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 2: REINFORCED MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 1,5 MM
08/19979365 DC : DRAFT FEB 2008 BS ISO 15928-3 - HOUSES - DESCRIPTION OF PERFORMANCE - PART 3: STRUCTURAL DURABILITY
17/30347375 DC : 0 BS EN 62368-1 ED 3.0 - AUDIO/VIDEO; INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
DD CEN/TS 15534-1:2007 Wood-plastics composites (WPC) Test methods for characterisation of WPC materials and products
PREN 50467 : DRAFT 2009 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
BS ISO 9370:2017 Plastics. Instrumental determination of radiant exposure in weathering tests. General guidance and basic test method
08/30181778 DC : DRAFT JULY 2008 BS EN 15836-1 - PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 1: HOMOGENOUS MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 0,75 MM
UNE-EN 438-2:2016 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 2: Determination of properties
I.S. EN 60068-2-5:2011 ENVIRONMENTAL TESTING - PART 2-5: TESTS - TEST SA: SIMULATED SOLAR RADIATION AT GROUND LEVEL AND GUIDANCE FOR SOLAR RADIATION TESTING
ISO/TS 19022:2016 Plastics — Method of controlled acceleration of laboratory weathering by increased irradiance
ISO/IEC 11801-1:2017 Information technology — Generic cabling for customer premises — Part 1: General requirements
DIN EN 16434:2014-06 INTERNAL BLINDS - PROTECTION FROM STRANGULATION HAZARDS - REQUIREMENTS AND TEST METHODS FOR SAFETY DEVICES
DIN EN 16434 E : 2014 INTERNAL BLINDS - PROTECTION FROM STRANGULATION HAZARDS - REQUIREMENTS AND TEST METHODS FOR SAFETY DEVICES
EN ISO 11403-3:2014 Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO 11403-3:2014)
IEC 60794-1-22 REDLINE : 2ED 2017 OPTICAL FIBRE CABLES - PART 1-22: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - ENVIRONMENTAL TEST METHODS
CSA C22.2 No. 18.1 : 2013 METALLIC OUTLET BOXES
16/30336501 DC : 0 BS EN 16951-2 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS
CSA C22.2 No. 61730-1 : 2011 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
EN 50604-1:2016 Secondary lithium batteries for light EV (electric vehicle) applications - Part 1: General safety requirements and test methods
UNE-IEC 60092-306:2010 Electrical installations in ships - Part 306: Equipment - Luminaires and lighting accessories
BIS IS 13252-22 : 2014 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 22: EQUIPMENT TO BE INSTALLED OUTDOORS
CEI EN 62368-1 : 2016 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
UNE-EN ISO 105-B10:2012 Textiles - Tests for colour fastness - Part B10: Artificial weathering - Exposure to filtered xenon-arc radiation (ISO 105-B10:2011)
I.S. EN 15534-5:2014 COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 5: SPECIFICATIONS FOR CLADDING PROFILES AND TILES
CEI EN 60079-30-1 : 2008 EXPLOSIVE ATMOSPHERES - PART 30-1: ELECTRICAL RESISTANCE TRACE HEATING - GENERAL AND TESTING REQUIREMENTS
CEI EN 62208 : 2012 EMPTY ENCLOSURES FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS
I.S. EN IEC 60794-1-22:2018 OPTICAL FIBRE CABLES - PART 1-22: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - ENVIRONMENTAL TEST METHODS
I.S. EN 10223-8:2013 STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 8: WELDED MESH GABION PRODUCTS
ISO 15372:2000 Ships and marine technology — Inflatable rescue boats — Coated fabrics for inflatable chambers
I.S. EN 50539-11:2013 LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS
PREN 131-2 : DRAFT 2009 LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING
CSA C22.2 No. 18-4 : 2004 : INC : AMD 2 : 2009 HARDWARE FOR THE SUPPORT OF CONDUIT, TUBING, AND CABLE
UNI EN 16281 : 2013 CHILD PROTECTIVE PRODUCTS - CONSUMER FITTED CHILD RESISTANT LOCKING DEVICES FOR WINDOWS AND BALCONY DOORS - SAFETY REQUIREMENTS AND TEST METHODS
OVE/ONORM EN 62852 : 2015 CONNECTORS FOR DC-APPLICATION IN PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS (IEC 62852:2014)
I.S. EN ISO 16474-2:2013 PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 2: XENON-ARC LAMPS (ISO 16474-2:2013)
UNE 27700:2013 Systems and equipments to improve the stability and floatability reserve of vessels and floating structrures by inflatable means, in case of water ingress or excessive listing. Requirements and test methods for the flotation modules.
ISO 25649-7:2017 Floating leisure articles for use on and in the water Part 7: Additional specific safety requirements and test methods for Class E devices
I.S. EN ISO 19712-2:2013 PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 2: DETERMINATION OF PROPERTIES - SHEET GOODS (ISO 19712-2:2007)
UNE-ISO 1268-11:2012 Fibre-reinforced plastics. Methods of producing test plates. Part 11: Injection moulding of BMC and other long-fibre moulding compounds. Small plates
CEI EN 60068-2-5 : 2012 ENVIRONMENTAL TESTING - PART 2: TESTS - TEST SA: SIMULATED SOLAR RADIATION AT GROUND LEVEL AND GUIDANCE FOR SOLAR RADIATION TESTING
ISO 19862:2015 Buildings and civil engineering works Sealants Durability to extension compression cycling under accelerated weathering
IEC 60794-1-22:2017 Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods
I.S. EN 124-6:2015 GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 6: GULLY TOPS AND MANHOLE TOPS MADE OF POLYPROPYLENE (PP), POLYETHYLENE (PE) OR UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U)
PREN 513 : DRAFT 2017 PLASTICS - POLY(VINYL CHLORIDE) (PVC) BASED PROFILES - DETERMINATION OF THE RESISTANCE TO ARTIFICIAL WEATHERING
ISO/TR 18486:2016 Plastics Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance
I.S. EN 17033:2018 PLASTICS - BIODEGRADABLE MULCH FILMS FOR USE IN AGRICULTURE AND HORTICULTURE - REQUIREMENTS AND TEST METHODS
UNI EN 15752-1 : 2015 GLASS IN BUILDING - ADHESIVE BACKED POLYMERIC FILM - PART 1: DEFINITIONS AND REQUIREMENTS
ISO 7823-2:2003 Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 2: Extruded sheets
DIN EN 13071-1:2008-10 STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED BOTTOM EMPTIED - PART 1: GENERAL REQUIREMENTS
IEC 60335-2-40 REDLINE : 6.0 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-40: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEAT PUMPS, AIR-CONDITIONERS AND DEHUMIDIFIERS
PREN 14932 : DRAFT 2016 PLASTICS - STRETCH THERMOPLASTIC FILMS FOR WRAPPING SILAGE BALES - REQUIREMENTS AND TEST METHODS, CONDITIONS OF USE AND REMOVAL
CEN ISO/TR 18486:2017 Plastics - Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance (ISO/TR 18486:2016)
CEI EN 60099-4 : 2015 SURGE ARRESTERS - PART 4: METAL-OXIDE SURGE ARRESTERS WITHOUT GAPS FOR A.C. SYSTEMS
ISO 17398:2004 Safety colours and safety signs — Classification, performance and durability of safety signs
CSA C22.2 No. 130 : 2016 REQUIREMENTS FOR ELECTRICAL RESISTANCE TRACE HEATING AND HEATING DEVICE SETS
IEC TS 62561-8:2018 Lightning protection system components (LPSC) - Part 8: Requirements for components for isolated LPS
UNE-EN 60068-2-5:2011 Environmental testing - Part 2-5: Tests - Test Sa: Simulated solar radiation at ground level and guidance for solar radiation testing
ASTM D 5857 : 2017 : REDLINE Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology
UNE-EN 62852:2015 Connectors for DC-application in photovoltaic systems - Safety requirements and tests
UNI EN ISO 19712-3 : 2013 PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 3: DETERMINATION OF PROPERTIES - SOLID SURFACE SHAPES
NF EN 60335-2-109 : 2011 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-109: PARTICULAR REQUIREMENTS FOR UV RADIATION WATER TREATMENT APPLIANCES
NF EN 60950-1 : 2006 AMD 2 2014 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
BS EN 14836:2005 Synthetic surfaces for outdoor sports areas. Exposure to artificial weathering
I.S. EN 60099-4:2014 SURGE ARRESTERS - PART 4: METAL-OXIDE SURGE ARRESTERS WITHOUT GAPS FOR A.C. SYSTEMS
I.S. EN 62275:2015 CABLE MANAGEMENT SYSTEMS - CABLE TIES FOR ELECTRICAL INSTALLATIONS
IEC 62930:2017 Electric cables for photovoltaic systems with a voltage rating of 1,5 kV DC
ISO 1268-11:2005 Fibre-reinforced plastics — Methods of producing test plates — Part 11: Injection moulding of BMC and other long-fibre moulding compounds — Small plates
IEC 60099-8 REDLINE : 2ED 2017 SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV
IEC 61950:2007 Cable management systems - Specifications for conduit fittings and accessories for cable installations for extra heavy duty electrical steel conduit
DIN EN 12899-1:2008-02 FIXED VERTICAL ROAD TRAFFIC SIGNS - PART 1: FIXED SIGNS
DIN EN 13200-4:2006-12 Spectator facilities - Part 4: Seats - Product characteristics
DIN EN 1359:2007-06 GAS METERS - DIAPHRAGM GAS METERS
DIN EN 15434 E : 2010 GLASS IN BUILDING - PRODUCT STANDARD FOR STRUCTURAL AND/OR ULTRA-VIOLET RESISTANT SEALANT (FOR USE WITH STRUCTURAL SEALANT GLAZING AND/OR INSULATING GLASS UNITS WITH EXPOSED SEALS)
DIN EN 13206:2015-09 (Draft) PLASTICS - THERMOPLASTIC COVERING FILMS FOR USE IN AGRICULTURE AND HORTICULTURE
UNI EN 3-8 : 2007 PORTABLE FIRE EXTINGUISHERS - PART 8: ADDITIONAL REQUIREMENTS TO EN 3-7 FOR THE CONSTRUCTION, RESISTANCE TO PRESSURE AND MECHANICAL TESTS FOR EXTINGUISHERS WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR
DIN EN 15132 E : 2006 CONTAINER SHELLS FOR MOBILE WASTE CONTAINERS WITH A CAPACITY UP TO 1700 L - PERFORMANCE REQUIREMENTS AND TEST METHODS
DIN EN 14836:2015-03 (Draft) SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - EXPOSURE TO ARTIFICIAL WEATHERING
DIN EN ISO 5674:2009-06 TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - GUARDS FOR POWER TAKE-OFF (PTO) DRIVE-SHAFTS - STRENGTH AND WEAR TESTS AND ACCEPTANCE CRITERIA
DIN EN 14323:2004-06 WOOD-BASED PANELS - MELAMINE FACED BOARDS FOR INTERIOR USES - TEST METHODS
BS EN 840-5:2012 Mobile waste and recycling containers Performance requirements and test methods
ISO 7823-3:2007 Plastics Poly(methyl methacrylate) sheets Types, dimensions and characteristics Part 3: Continuous cast sheets
ISO 11431:2002 Building construction — Jointing products — Determination of adhesion/cohesion properties of sealants after exposure to heat, water and artificial light through glass
ISO 7491:2000 Dental materials — Determination of colour stability
BS EN 1385:2012 Helmets for canoeing and white water sports
BS EN ISO 7823-3:2007 Plastics. Poly(methacrylate) sheets. Types, dimensions and characteristics Continuous cast sheets
BS EN 3-8:2006 Portable fire extinguishers Additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar
09/30206527 DC : 0 BS EN 60079-0 ED 6.0 - EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
BS EN 438-2 : 2016 HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
BS EN 14389-1:2015 Road traffic noise reducing devices. Procedures for assessing long term performance Acoustical characteristics
14/30311240 DC : 0 BS EN 61010-1 ED 3 AMD 1 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
BS EN ISO 11997-2:2013 Paints and varnishes. Determination of resistance to cyclic corrosion conditions Wet (salt fog)/dry/humidity/UV light
ISO 8936:2017 Awnings for leisure accommodation vehicles — Requirements and test methods
DIN EN 15187 E : 2006 FURNITURE - ASSESSMENT OF THE EFFECT OF LIGHT EXPOSURE
EN 61969-3:2012 Mechanical structures for electronic equipment - Outdoor enclosures - Part 3: Environmental requirements, tests and safety aspects
BIS IS/IEC 60079-0 : 2011 EXPLOSIVE ATMOSPHERES - PART 0: GENERAL REQUIREMENTS
I.S. EN 14389-2:2015 ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS
I.S. EN 671-2:2012 FIXED FIREFIGHTING SYSTEMS - HOSE SYSTEMS - PART 2: HOSE SYSTEMS WITH LAY-FLAT HOSE
DIN EN 1866:1998-11 MOBILE FIRE EXTINGUISHERS
I.S. EN 263:2008 SANITARY APPLIANCES - CROSSLINKED CAST ACRYLIC SHEETS FOR BATHS AND SHOWER TRAYS FOR DOMESTIC PURPOSES
I.S. EN 10223-3:2013 STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 3: HEXAGONAL STEEL WIRE MESH PRODUCTS FOR CIVIL ENGINEERING PURPOSES
I.S. EN 1384:2017 HELMETS FOR EQUESTRIAN ACTIVITIES
I.S. EN 10245-2:2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 2: PVC FINISHED WIRE
I.S. EN 12574-2:2017 STATIONARY WASTE CONTAINERS - PART 2: PERFORMANCE REQUIREMENTS AND TEST METHODS
I.S. EN 14323:2017 WOOD-BASED PANELS - MELAMINE FACED BOARDS FOR INTERIOR USES - TEST METHODS
I.S. EN 10245-1:2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES
DIN EN 12574-2:2017-05 STATIONARY WASTE CONTAINERS - PART 2: PERFORMANCE REQUIREMENTS AND TEST METHODS
I.S. EN 131-2:2010 LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING
I.S. EN 13245-1:2010 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 1: DESIGNATION OF PVC-U PROFILES
I.S. EN 14628:2005 DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL POLYETHYLENE COATING FOR PIPES - REQUIREMENTS AND TEST METHODS
DIN EN ISO 11431:2003-01 BUILDING CONSTRUCTION - JOINTING PRODUCTS - DETERMINATION OF ADHESION/COHESION PROPERTIES OF SEALANTS AFTER EXPOSURE TO HEAT, WATER AND ARTIFICIAL LIGHT THROUGH GLASS
I.S. EN 10245-4:2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 4: POLYESTER COATED WIRE
I.S. EN 607:2004 EAVES GUTTERS AND FITTINGS MADE OF PVC-U - DEFINITIONS, REQUIREMENTS AND TESTING
I.S. EN 1078:2012 HELMETS FOR PEDAL CYCLISTS AND FOR USERS OF SKATEBOARDS AND ROLLER SKATES
EN ISO 11963:2012 Plastics - Polycarbonate sheets - Types, dimensions and characteristics (ISO 11963:2012)
I.S. EN 12492:2012 MOUNTAINEERING EQUIPMENT - HELMETS FOR MOUNTAINEERS - SAFETY REQUIREMENTS AND TEST METHODS
I.S. EN ISO 11997-2:2013 PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT (ISO 11997-2:2013)
I.S. EN 397:2012 INDUSTRIAL SAFETY HELMETS
I.S. EN ISO 4892-1:2016 PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 4892-1:2016)
I.S. EN 1873:2014 PREFABRICATED ACCESSORIES FOR ROOFING - INDIVIDUAL ROOFLIGHTS OF PLASTICS - PRODUCT SPECIFICATION AND TEST METHODS
I.S. EN 1359:2017 GAS METERS - DIAPHRAGM GAS METERS
I.S. EN 12200-1:2016 PLASTICS RAINWATER PIPING SYSTEMS FOR ABOVE GROUND EXTERNAL USE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
I.S. EN 966:2012 HELMETS FOR AIRBORNE SPORTS
I.S. EN ISO 11403-3:2014 PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 3: ENVIRONMENTAL INFLUENCES ON PROPERTIES (ISO 11403-3:2014)
DIN EN ISO 11963:2013-03 PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS (ISO 11963:2012)
I.S. EN 1385:2012 HELMETS FOR CANOEING AND WHITE WATER SPORTS
I.S. EN 13484:2012 HELMETS FOR USERS OF LUGES
I.S. EN 14125:2013 THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS
I.S. EN 12899-1:2007 FIXED, VERTICAL ROAD TRAFFIC SIGNS - PART 1: FIXED SIGNS
I.S. EN ISO 5674:2009 TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - GUARDS FOR POWER TAKE-OFF (PTO) DRIVE-SHAFTS - STRENGTH AND WEAR TESTS AND ACCEPTANCE CRITERIA
I.S. EN ISO 12017:1997 PLASTICS - POLY(METHYL METHACRYLATE) DOUBLE- AND TRIPLE-SKIN SHEETS - TEST METHODS
I.S. EN 671-1:2012 FIXED FIREFIGHTING SYSTEMS - HOSE SYSTEMS - PART 1: HOSE REELS WITH SEMI-RIGID HOSE
IEC 61914:2015 Cable cleats for electrical installations
DIN EN 1873:2016-07 PREFABRICATED ACCESSORIES FOR ROOFING - INDIVIDUAL ROOFLIGHTS OF PLASTICS - PRODUCT SPECIFICATION AND TEST METHODS
I.S. EN 13341:2005 STATIC THERMOPLASTIC TANKS FOR ABOVE GROUND STORAGE OF DOMESTIC HEATING OILS, KEROSENE AND DIESEL FUELS - BLOW MOULDED AND ROTATIONALLY MOULDED POLYETHYLENE TANKS AND ROTATIONALLY MOULDED TANKS MADE OF ANIONICALLY POLYMERIZED POLYAMIDE 6 - REQUIREMENTS AND TEST METHODS
UNI EN ISO 12402-7 : 2011 PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS
I.S. EN 10245-3:2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 3: PE COATED WIRE
I.S. EN 13575:2012 STATIC THERMOPLASTIC TANKS FOR THE ABOVE GROUND STORAGE OF CHEMICALS - BLOW MOULDED OR ROTATIONALLY MOULDED POLYETHYLENE TANKS - REQUIREMENTS AND TEST METHODS
I.S. EN 812:2012 INDUSTRIAL BUMP CAPS
I.S. EN 14389-1:2015 ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS
I.S. EN 15434:2006 GLASS IN BUILDING - PRODUCT STANDARD FOR STRUCTURAL AND/OR ULTRAVIOLET RESISTANT SEALANT (FOR USE WITH STRUCTURAL SEALANT GLAZING AND/OR INSULATING GLASS UNITS WITH EXPOSED SEALS)
I.S. EN ISO 7823-3:2007 PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 3: CONTINUOUS CAST SHEETS
VDI 3822 Blatt 2.1.8:2012-01 Failure analysis - Defects of thermoplastic products made of plastics caused by weather-induced stress
BIS IS 13252-1 : 2010 AMD 1 2013 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
VDI 3958 Blatt 10:2012-01 Environmental simulation - Exposure of materials to gaseous air pollutants
VDI 3958 Blatt 11:2009-05 Environmental simulation - Exposure of polymers to air pollutants in combination with weathering
VDI 3958 Blatt 12:2004-02 Environmental simulation - Effects of acidic precipitation on polymers - Test methods
BS 2782-5.540D(1999) : 1999 AMD 13148 METHODS OF TESTING PLASTICS - OPTICAL AND COLOUR PROPERTIES, WEATHERING - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - GENERAL GUIDANCE
VDI 4489 Blatt 1:2015-06 (Draft) Labelling of pallets with Auto-ID elements - Returnable wooden pallets of Euro measure (800 mm x 1200 mm)
ASTM D 2565 : 2016 : REDLINE Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications
DIN EN 15836-1:2010-11 Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm
PREN 62561-6 : DRAFT 2011 LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 6: REQUIREMENTS FOR LIGHTNING STRIKE COUNTERS (LSC)
UNI CEN/TS 16599 : 2014 PHOTOCATALYSIS - IRRADIATION CONDITIONS FOR TESTING PHOTOCATALYTIC PROPERTIES OF SEMICONDUCTING MATERIALS AND THE MEASUREMENT OF THESE CONDITIONS
17/30356577 DC : 0 BS EN 60099-8 - SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV
96/709571 DC : DRAFT JUL 1996 PREN 10286 - STEEL TUBES AND FITTINGS FOR ON AND OFFSHORE PIPELINES - EXTERNAL THREE LAYER EXTRUDED POLYPROPYLENE BASED COATINGS
BS EN 16281:2013 Child protective products. Consumer fitted child resistant locking devices for windows and balcony doors. Safety requirements and test methods
BS EN ISO 19712-3:2013 Plastics. Decorative solid surfacing materials Determination of properties. Solid surface shapes
11/30231856 DC : 0 BS EN 14125 - THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS
UNE-EN 50618:2015 Electric cables for photovoltaic systems
BS ISO 15686-2:2012 Buildings and constructed assets. Service life planning Service life prediction procedures
PREN 14389-1 : DRAFT 2013 ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS
BS EN 62790:2015 Junction boxes for photovoltaic modules. Safety requirements and tests
09/30214460 DC : 0 BS EN 50548 - JUNCTION BOXES FOR PHOTOVOLTAIC MODULES
BS ISO 19862:2015 Buildings and civil engineering works. Sealants. Durability to extension compression cycling under accelerated weathering
BS ISO 4141-1:2005 Road vehicles. Multi-core connecting cables Test methods and requirements for basic performance sheathed cables
ISO 3934:2002 Rubber, vulcanized and thermoplastic Preformed gaskets used in buildings Classification, specifications and test methods
BS EN 60794-3-70:2016 Optical fibre cables Outdoor cables. Family specification for outdoor optical fibre cables for rapid/multiple deployment
PREN 12200-1 : DRAFT 2014 PLASTICS RAINWATER PIPING SYSTEMS FOR ABOVE GROUND EXTERNAL USE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
DD ENV 12224:1997 Geotextiles and geotextile-related products. Determination of the resistance to weathering
BS EN 16240:2013 Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings. Requirements and test methods
BS EN 50618:2014 Electric cables for photovoltaic systems (BT(DE/NOT)258)
BS EN 50289-4-17:2015 Communication cables. Specifications for test methods Test methods for UV resistance evaluation of the sheath of electrical and optical fibre cable
08/30180847 DC : DRAFT JUNE 2008 BS EN 10245-5 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE
DIN EN 15651-2:2016-10 (Draft) SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 2: SEALANTS FOR GLAZING
14/30281866 DC : 0 BS ISO 18178 - GLASS IN BUILDING - LAMINATED SOLAR PV GLASS
UNE-EN 15752-1:2015 Glass in building - Adhesive backed polymeric film - Part 1: Definitions and requirements
DIN ISO 5912 E : 2004 CAMPING TENTS
BS EN 16434:2014 Internal blinds. Protection from strangulation hazards. Requirements and test methods for safety devices
15/30297966 DC : 0 BS EN 60950-22/ED2 - INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 22: EQUIPMENT TO BE INSTALLED OUTDOORS
BS EN 50164-4:2008 Lightning protection components (LPC) Requirements for conductor fasteners
BS ISO 10966:2011 Sports and recreational equipment. Fabrics for awnings. Specification
BS EN 60099-8:2011 Surge arresters Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV
UNE-EN 61914:2016 Cable cleats for electrical installations
I.S. EN 60335-2-109:2010 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-109: PARTICULAR REQUIREMENTS FOR UV RADIATION WATER TREATMENT APPLIANCES
ESPECIFICACION UNE 0059:2017 Fiberglass reinforced polyester poles for overhead power distribution lines and telephony lines
UNE-EN 15836-2:2010 Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm
12/30258334 DC : 0 BS EN 1013 - LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTIC SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
05/30103531 DC : DRAFT AUG 2005
10/30196613 DC : 0 BS ISO 14572 - ROAD VEHICLES - ROUND, SHEATHED, 60 V AND 600 V SCREENED AND UNSCREENED SINGLE- OR MULTI-CORE CABLES - TEST METHODS AND REQUIREMENTS FOR BASIC AND HIGH-PERFORMANCE CABLES
12/30256082 DC : 0 BS EN 12899-6 - FIXED, VERTICAL ROAD TRAFFIC SIGNS - PART 6: PERFORMANCE OF RETROREFLECTIVE SIGN FACE MATERIAL
NF EN 50164-4 : 2008 LIGHTNING PROTECTION COMPONENTS (LPC) - PART 4: REQUIREMENTS FOR CONDUCTOR FASTENERS
BS ISO 18937:2014 Imaging materials. Photographic reflection prints. Methods for measuring indoor light stability
07/30137506 DC : 0 BS ISO 19712-1 - PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 1: CLASSIFICATION AND SPECIFICATIONS
08/30194094 DC : 0 BS EN 13245-3 - PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES
DIN ISO 3917:2003-07 ROAD VEHICLES - SAFETY GLAZING MATERIALS - TEST METHODS FOR RESISTANCE TO RADIATION, HIGH TEMPERATURE, HUMIDITY, FIRE AND SIMULATED WEATHERING (ISO 3917:2016)
15/30315522 DC : 0 BS ISO 4586-2 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL, HPDL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
DIN EN ISO 30013:2012-03 Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties (ISO 30013:2011)
DD CLC/TS 50467:2008 Railway applications. Rolling stock. Electrical connectors, requirements and test methods
03/304727 DC : DRAFT OCT 2003 ISO/DIS 8029 - PLASTICS HOSE - GENERAL PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE REINFORCED - SPECIFICATION
BS EN 60439-5:2006 Low-voltage switchgear and controlgear assemblies Particular requirements for assemblies for power distribution in public networks
DIN ISO 16938-2:2012-12 BUILDING CONSTRUCTION - DETERMINATION OF THE STAINING OF POROUS SUBSTRATES BY SEALANTS USED IN JOINTS - PART 2: TEST WITHOUT COMPRESSION (ISO 16938-2:2008)
17/30335121 DC : 0 BS EN 13655 - PLASTICS - THERMOPLASTIC MULCH FILMS RECOVERABLE AFTER USE, FOR USE IN AGRICULTURE AND HORTICULTURE
06/30133250 DC : 0 BS EN 13071-1 - STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED BOTTOM EMPTIED - PART 1: GENERAL REQUIREMENTS
UNE-EN 124-5:2015 Gully tops and manhole tops for vehicular and pedestrian areas - Part 5: Gully tops and manhole tops made of composite materials
BS EN 62217:2013 Polymeric HV insulators for indoor and outdoor use. General definitions, test methods and acceptance criteria
DIN EN 124-6 E : 2015 GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 6: GULLY TOPS AND MANHOLE TOPS MADE OF POLYPROPYLENE (PP), POLYETHYLENE (PE) OR UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U)
02/121747 DC : DRAFT APR 2002 PREN 438-2 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
BS ISO 1268-11:2005 Fibre-reinforced plastics. Methods of producing test plates Injection moulding of BMC and other long-fibre moulding compounds. Small plates
BS EN 15534-4:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) Specifications for decking profiles and tiles
03/116049 DC : DRAFT NOV 2003 BS EN 12574-2 - STATIONARY WASTE CONTAINERS - PART 2: PERFORMANCE REQUIREMENTS AND TEST METHODS
04/30113880 DC : DRAFT MAY 2004 BS EN 14932 - PLASTICS - STRETCH THERMOPLASTIC FILMS FOR WRAPPING BALES - REQUIREMENTS AND TEST METHODS
BS EN 50298:1999 Empty enclosures for low-voltage switchgear and controlgear assemblies. General requirements
06/30156625 DC : DRAFT OCT 2006 BS EN ISO 105-B10 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART B10: ARTIFICIAL WEATHERING - EXPOSURE TO FILTERED XENON - ARC RADIATION
BS ISO 3917:2016 Road vehicles. Safety glazing materials. Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering
DIN EN 14963:2006-12 Roof coverings - Continuous rooflights of plastics with or without upstands - Classification, requirements and test methods
10/30215313 DC : 0 BS ISO 18930 - IMAGING MATERIALS - PICTORIAL COLOUR REFLECTION PRINTS - METHODS FOR EVALUATING IMAGE STABILITY UNDER OUTDOOR CONDITIONS
11/30238648 DC : DRAFT FEB 2011 BS EN 16240 - LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
15/30313931 DC : 0 BS ISO 9022-9 - OPTICS AND PHOTONICS - ENVIRONMENTAL TEST METHODS - PART 9: SOLAR RADIATION AND WEATHERING
08/30183606 DC : DRAFT JUNE 2008 BS EN 60335-2-109 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-109: PARTICULAR REQUIREMENTS FOR UV RADIATION WATER TREATMENT APPLIANCES
PREN 3-8 : DRAFT 2015 PORTABLE FIRE EXTINGUISHERS - PART 8: REQUIREMENTS FOR THE CONSTRUCTION, PRESSURE RESISTANCE AND MECHANICAL TESTS FOR EXTINGUISHERS WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR, WHICH COMPLY WITH THE REQUIREMENTS OF EN 3-7
08/30180835 DC : DRAFT JUNE 2008 BS EN 10245-1 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES
08/30180838 DC : DRAFT JUNE 2008 BS EN 10245-2 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 2: PVC FINISHED WIRE
14/30311481 DC : 0 BS EN 14187-8 - COLD APPLIED JOINT SEALANTS - TEST METHODS - PART 8: DETERMINATION OF THE ARTIFICIAL WEATHERING BY UV-IRRADIATION
DIN EN 16153:2015-05 LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
IEC 62561-6:2018 Lightning protection system components (LPSC) - Part 6: Requirements for lightning strike counters (LSC)
CSA C22.2 No. 18.3 : 2012 CONDUIT, TUBING, AND CABLE FITTINGS
C22.2 NO. 18.3-12 (R2017) Conduit, tubing, and cable fittings (Tri-national standard, with ANCE NMX-J-017 and UL 514B)
EN 438-2:2016 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties
UNE-EN 62208:2012 Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements
UNE-EN 60335-2-109:2011 Household and similar electrical appliances - Safety -- Part 2-109: Particular requirements for UV radiation water treatment appliances
UL 60950-22:2ED 2017-03 Information Technology Equipment - Safety - Part 22: Equipment to be Installed Outdoors
I.S. EN ISO 19712-3:2013 PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 3: DETERMINATION OF PROPERTIES - SOLID SURFACE SHAPES (ISO 19712-3:2007)
I.S. EN ISO 30013:2011 RUBBER AND PLASTICS HOSES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - DETERMINATION OF CHANGES IN COLOUR, APPEARANCE AND OTHER PHYSICAL PROPERTIES (ISO 30013:2011)
I.S. EN 61643-11:2012 LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 11: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER SYSTEMS - REQUIREMENTS AND TESTS METHODS
PREN 50289-4-17 : DRAFT 2014 COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 4-17: TEST METHODS FOR UV RESISTANCE EVALUATION OF THE SHEATH OF ELECTRICAL AND OPTICAL FIBRE CABLE
I.S. EN 62752:2016&AC:2019-03 IN-CABLE CONTROL AND PROTECTION DEVICE FOR MODE 2 CHARGING OF ELECTRIC ROAD VEHICLES (IC-CPD)
CEI EN 62275 : 2016 CABLE MANAGEMENT SYSTEMS - CABLE TIES FOR ELECTRICAL INSTALLATIONS
BS EN 1013 : 2012 LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
I.S. EN 16240:2013 LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
I.S. EN ISO 29664:2017 PLASTICS - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION (ISO 29664:2010)
I.S. EN 50164-4:2008 LIGHTNING PROTECTION COMPONENTS (LPC) - PART 4: REQUIREMENTS FOR CONDUCTOR FASTENERS
I.S. EN 61439-1:2011 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES (IEC 61439-1:2011)
EN 62561-4:2017 Lightning protection system components (LPSC) - Part 4: Requirements for conductor fasteners
NF EN 61914 : 2016 CABLE CLEATS FOR ELECTRICAL INSTALLATIONS
ISO 18937:2014 Imaging materials Photographic reflection prints Methods for measuring indoor light stability
UNE-EN ISO 29664:2017 Plastics - Artificial weathering including acidic deposition (ISO 29664:2010)
I.S. EN 60439-5:2006 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS
UNE-EN 124-6:2015 Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U)
IEC 60099-8:2017 Surge arresters - Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV
S.R. CEN ISO/TR 18486:2017 PLASTICS - PARAMETERS COMPARING THE SPECTRAL IRRADIANCE OF A LABORATORY LIGHT SOURCE FOR WEATHERING APPLICATIONS TO A REFERENCE SOLAR SPECTRAL IRRADIANCE (ISO/TR 18486:2016)
UNI EN ISO 21809-1 : 2011 PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 1: POLYOLEFIN COATINGS (3-LAYER PE AND 3-LAYER PP)
I.S. EN 124-5:2015 GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 5: GULLY TOPS AND MANHOLE TOPS MADE OF COMPOSITE MATERIALS
PREN 50526-1 : DRAFT 2009 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 1: SURGE ARRESTERS
I.S. EN 13245-3:2010 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES
I.S. EN ISO 25649-7:2017 FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 7: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS E DEVICES (ISO 25469-7:2017)
PREN 13655 : DRAFT 2016 PLASTICS - THERMOPLASTIC MULCH FILMS RECOVERABLE AFTER USE, FOR USE IN AGRICULTURE AND HORTICULTURE
I.S. EN 15836-1:2010 PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 1: HOMOGENOUS MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 0,75 MM
UNE-EN ISO 15110:2018 Paints and varnishes - Artificial weathering including acidic deposition (ISO 15110:2017)
EN IEC 62688:2018 Concentrator photovoltaic (CPV) modules and assemblies - Safety qualification
I.S. EN 60950-1:2006 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005 (MOD))
EN 17098-1:2018 Plastics - Barrier films for agricultural and horticultural soil disinfection by fumigation - Part 1: Specifications for barrier films
UNI EN 4708-001 : 2014 AEROSPACE SERIES - SLEEVING, HEAT-SHRINKABLE, FOR BINDING, INSULATION AND IDENTIFICATION - PART 001: TECHNICAL SPECIFICATION
EN 13207:2018 Plastics - Thermoplastic silage films and tubes for use in agriculture
BS EN 60079-30-1:2017 Explosive atmospheres Electrical resistance trace heating. General and testing requirements
BS EN 13071-1:2008 Stationary waste containers up to 5000 l, top lifted and bottom emptied General requirements
PREN 1384 : DRAFT 2014 HELMETS FOR EQUESTRIAN ACTIVITIES
UNI EN 13245-3 : 2010 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES
IEC 60800:2009 Heating cables with a rated voltage of 300/500 V for comfort heating and prevention of ice formation
UNI ISO 3865 : 2010 RUBBER, VULCANIZED OR THERMOPLASTIC - METHODS OF TEST FOR STAINING IN CONTACT WITH ORGANIC MATERIAL
EN 13655:2018 Plastics - Thermoplastic mulch films recoverable after use, for use in agriculture and horticulture
BS EN 62275:2015 Cable management systems. Cable ties for electrical installations
ISO 15398:2012 Specifications for thermoplastics covers and frames for manholes and inspection chambers used in non-traffic areas
EN 14932:2018 Plastics - Thermoplastic stretch films for wrapping silage bales
EN 17033:2018 Plastics - Biodegradable mulch films for use in agriculture and horticulture - Requirements and test methods
EN 62275:2015 Cable management systems - Cable ties for electrical installations
I.S. EN 13207:2018 PLASTICS - THERMOPLASTIC SILAGE FILMS AND TUBES FOR USE IN AGRICULTURE
IEC 62368-1:2014 Audio/video, information and communication technology equipment - Part 1: Safety requirements
I.S. EN 12068:1999 CATHODIC PROTECTION - EXTERNAL ORGANIC COATINGS FOR THE CORROSION PROTECTION OF BURIED OR IMMERSED STEEL PIPELINES USED IN CONJUNCTION WITH CATHODIC PROTECTION - TAPES AND SHRINKABLE MATERIALS
S.R. CLC/TS 50467:2008 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
ISO 15082:2016 Road vehicles Tests for rigid plastic safety glazing materials
IEC 62724:2013 Railway applications - Fixed installations - Electric traction - Insulating synthetic rope assemblies for support of overhead contact lines
DIN EN 1385:2012-04 HELMETS FOR CANOEING AND WHITE WATER SPORTS
DIN EN 1384:2015-02 (Draft) HELMETS FOR EQUESTRIAN ACTIVITIES
DIN EN 14187-8:2003-09 COLD APPLIED JOINT SEALANTS - TEST METHODS - PART 8: DETERMINATION OF THE ARTIFICIAL WEATHERING BY UV-IRRADIATION
BS EN 13206:2017 Plastics. Thermoplastic covering films for use in agriculture and horticulture
DIN EN ISO 11997-2:2013-12 PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT (ISO 11997-2:2013)
DIN EN 812:2012-04 INDUSTRIAL BUMP CAPS
DIN EN 3-8:2015-07 (Draft) PORTABLE FIRE EXTINGUISHERS - PART 8: ADDITIONAL REQUIREMENTS TO EN 3-7 FOR THE CONSTRUCTION, RESISTANCE TO PRESSURE AND MECHANICAL TESTS FOR EXTINGUISHERS WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR
DIN EN 14628 E : 2006 DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL POLYETHYLENE COATING FOR PIPES - REQUIREMENTS AND TEST METHODS
DIN EN ISO 11403-3:2014-09 Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO 11403-3:2014)
DIN EN 15132:2006-12 Container shells for mobile waste containers with a capacity up to 1700 l - Performance requirements and test methods
BS EN 1078 : 2012 HELMETS FOR PEDAL CYCLISTS AND FOR USERS OF SKATEBOARDS AND ROLLER SKATES
DIN EN 13206:2017-05 PLASTICS - THERMOPLASTIC COVERING FILMS FOR USE IN AGRICULTURE AND HORTICULTURE
BS EN 397 : 2012 INDUSTRIAL SAFETY HELMETS
IEC 61969-3:2011 Mechanical structures for electronic equipment - Outdoor enclosures - Part 3: Environmental requirements, tests and safety aspects
IEC 60439-5:2006 Low-voltage switchgear and controlgear assemblies - Part 5: Particular requirements for assemblies for power distribution in public networks
BS EN 12676-2:2000 Anti-glare systems for roads Test methods
BS EN 10245-3:2011 Steel wire and wire products. Organic coatings on steel wire PE coated wire
BS EN 4057-305:2005 Aerospace series. Cable ties for harnesses. Test methods Colour fastness
UNE-EN 62109-1:2011 Safety of power converters for use in photovoltaic power systems -- Part 1: General requirements
BS EN 14187-8:2017 Cold applied joint sealants. Test methods Determination of the artificial weathering by UV-irradiation
BS EN 1866:2005 Mobile fire extinguishers
IEC 62217:2012 Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria
UNE-EN 671-1:2013 Fixed firefighting systems - Hose systems - Part 1: Hose reels with semi-rigid hose
UNE-EN 10223-3:2014 Steel wire and wire products for fencing and netting - Part 3: Hexagonal steel wire mesh products for civil engineering purposes
UNE-EN 50521:2010 Connectors for photovoltaic systems - Safety requirements and tests
I.S. EN ISO 12402-7:2006 PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS
I.S. EN ISO 294-3:2003 PLASTICS - INJECTION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS - SMALL PLATES
DIN EN 1384:2012-05 HELMETS FOR EQUESTRIAN ACTIVITIES
CSA C22.2 No. 60950-1 :2007 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 60950-1 : 2007 : INC : AMD 1 : 2011 : R2012 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
EN 62790:2015 Junction boxes for photovoltaic modules - Safety requirements and tests
UNE-EN 62275:2016 Cable management systems - Cable ties for electrical installations
UNE-EN ISO 11963:2013 Plastics - Polycarbonate sheets - Types, dimensions and characteristics (ISO 11963:2012)
EN 14836:2005/AC:2007 SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - EXPOSURE TO ARTIFICIAL WEATHERING
C22.2 NO. 18.5-13 (R2018) Positioning devices (Bi-national standard, with UL 1565)
CSA C22.2 No. 60950-1 : 2007 : INC : AMD 2 : 2014 : R201200 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
UNE-EN 60950-1:2007 Information technology equipment - Safety - Part 1: General requirements
UL 514A:11ED 2013-02 Metallic Outlet Boxes
CSA C22.2 No. 60950-1 : 2007 : R2012 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 60335-2-40 : 2017 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-40: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEAT PUMPS, AIR-CONDITIONERS AND DEHUMIDIFIERS
CSA C22.2 42.1 : 2013 COVER PLATES FOR FLUSH-MOUNTED WIRING DEVICES
CSA C22.2 No. 60950-1 : 2007 : INC : UPD 1 : 2011 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 18.5:2013 POSITIONING DEVICES
EN ISO 294-3 : 2003 PLASTICS - INJECTION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS - PART 3: SMALL PLATES
CSA C22.2 No. 60950-1 : 2007 : INC : AMD 2 : 2014 : R2016 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
EN ISO 12402-7:2006/A1:2011 PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS
EN ISO 29664:2017 Plastics - Artificial weathering including acidic deposition (ISO 29664:2010)
EN 16240:2013 Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods
UNI EN 15187 : 2007 FURNITURE - ASSESSMENT OF THE EFFECT OF LIGHT EXPOSURE
EN 50298:1998 Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements
UNI EN 13484 : 2012 HELMETS FOR USERS OF LUGES
UNI EN 15434 : 2010 GLASS IN BUILDING - PRODUCT STANDARD FOR STRUCTURAL AND/OR ULTRA-VIOLET RESISTANT SEALANT (FOR USE WITH STRUCTURAL SEALANT GLAZING AND/OR INSULATING GLASS UNITS WITH EXPOSED SEALS)
UNI EN 10223-8 : 2014 STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 8: WELDED MESH GABION PRODUCTS
UNI EN 13245-1 : 2010 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 1: DESIGNATION OF PVC-U PROFILES
UNI EN 10245-3 : 2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 3: PE COATED WIRE
UNI EN 13341 : 2011 STATIC THERMOPLASTIC TANKS FOR ABOVE GROUND STORAGE OF DOMESTIC HEATING OILS, KEROSENE AND DIESEL FUELS - BLOW MOULDED AND ROTATIONALLY MOULDED POLYETHYLENE TANKS AND ROTATIONALLY MOULDED TANKS MADE OF ANIONICALLY POLYMERIZED POLYAMIDE 6 - REQUIREMENTS AND TEST METHODS
UNI EN 671-1 : 2012 FIXED FIREFIGHTING SYSTEMS - HOSE SYSTEMS - PART 1: HOSE REELS WITH SEMI-RIGID HOSE
UNI EN 397 : 2013 INDUSTRIAL SAFETY HELMETS
UNI EN ISO 5674 : 2009 TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - GUARDS FOR POWER TAKE- OFF (PTO) DRIVE-SHAFTS - STRENGTH AND WEAR TESTS AND ACCEPTANCE CRITERIA
UNI EN ISO 11997-2 : 2014 PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT
UNI EN 10223-7 : 2013 STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 7: STEEL WIRE WELDED PANELS FOR FENCING
UNI EN ISO 11963 : 2013 PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS
UNI EN 10245-2 : 2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 2: PVC FINISHED WIRE
UNI EN 10245-1 : 2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES
UNI EN 966 : 2013 HELMETS FOR AIRBORNE SPORTS
UNI EN 263 : 2008 SANITARY APPLIANCES - CROSSLINKED CAST ACRYLIC SHEETS FOR BATHS AND SHOWER TRAYS FOR DOMESTIC PURPOSES
UNI EN 13575 : 2012 STATIC THERMOPLASTIC TANKS FOR THE ABOVE GROUND STORAGE OF CHEMICALS - BLOW MOULDED OR ROTATIONALLY MOULDED POLYETHYLENE TANKS - REQUIREMENTS AND TEST METHODS
UNI EN 1385 : 2012 HELMETS FOR CANOEING AND WHITE WATER SPORTS
UNI EN 12492 : 2012 MOUNTAINEERING EQUIPMENT - HELMETS FOR MOUNTAINEERS - SAFETY REQUIREMENTS AND TEST METHODS
UNI EN 14125 : 2013 THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS
UNI EN 671-2 : 2012 FIXED FIREFIGHTING SYSTEMS - HOSE SYSTEMS - PART 2: HOSE SYSTEMS WITH LAY-FLAT HOSE
EN 607:2004 Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing
UNI EN 10245-4 : 2011 Wire and drawn steel products - Organic coatings on steel wires - Part 4: Polyester coated wires
UNI EN 12899-1 : 2008 FIXED, VERTICAL ROAD TRAFFIC SIGNS - PART 1: FIXED SIGNS
UNI EN 15200 : 2007 SANITARY APPLIANCES - MULTIFUNCTION SHOWER CABINETS
UNI EN 10223-3 : 2014 STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 3: HEXAGONAL STEEL WIRE MESH PRODUCTS FOR CIVIL ENGINEERING PURPOSES
UNI EN 1078 : 2013 HELMETS FOR PEDAL CYCLISTS AND FOR USERS OF SKATEBOARDS AND ROLLER SKATES
UNI EN 812 : 2012 INDUSTRIAL BUMP CAPS
UNE-EN ISO 16474-2:2014 Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 16474-2:2013)
BS EN ISO 19712-2:2013 Plastics. Decorative solid surfacing materials Determination of properties. Sheet goods
13/30288815 DC : 0 BS EN 61914 - CABLE CLEATS FOR ELECTRICAL INSTALLATIONS
DIN ISO 16938-2 E : 2012 BUILDING CONSTRUCTION - DETERMINATION OF THE STAINING OF POROUS SUBSTRATES BY SEALANTS USED IN JOINTS - PART 2: TEST WITHOUT COMPRESSION (ISO 16938-2:2008)
BS ISO/IEC/IEEE 80005-1:2012 Utility connections in port High Voltage Shore Connection (HVSC) Systems. General requirements
DIN EN 15836-2:2010-11 Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm
BS EN 50300:2004 Low-voltage switchgear and controlgear assemblies. General requirements for low-voltage substation cable distribution boards
16/30328596 DC : 0 BS ISO 9370 - PLASTICS - INSTRUMENTAL DETERMINATION OF RADIANT EXPOSURE IN WEATHERING TESTS - GENERAL GUIDANCE AND BASIC TEST METHOD
DIN EN 13245-3:2010-11 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 3: Designation of PVC-UE profiles
BS ISO 16616:2015 Test methods for natural fibre-reinforced plastic composite (NFC) deck boards
EN IEC 60794-1-22:2018 Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods
I.S. EN 13071:2002 SELECTIVE WASTE COLLECTION CONTAINERS - ABOVE-GROUND MECHANICALLY-LIFTED CONTAINERS WITH CAPACITIES FROM 80 L TO 5000 L FOR SELECTIVE COLLECTION OF WASTE
02/102266 DC : DRAFT MAR 2002 PREN 14389-2 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS
DIN EN ISO 16474-2 E : 2014 PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 2: XENON-ARC LAMPS (ISO 16474-2:2013)
UNI EN 15836-1 : 2010 PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 1: HOMOGENOUS MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 0,75 MM
UNI EN ISO 30013 : 2011 RUBBER AND PLASTICS HOSES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - DETERMINATION OF CHANGES IN COLOUR, APPEARANCE AND OTHER PHYSICAL PROPERTIES
BS EN 124-5:2015 Gully tops and manhole tops for vehicular and pedestrian areas Gully tops and manhole tops made of composite materials
02/207432 DC : DRAFT JUN 2002 IEC 62217. ED.1.0 - CREATION OF A COMMON CLAUSE STANDARD FOR COMPOSITE INSULATORS
12/30239867 DC : 0 BS EN 62368-1 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
UNI EN ISO 105-B10 : 2012 TEXTILES - TESTS FOR COLOUR FASTNESS - PART B10: ARTIFICIAL WEATHERING - EXPOSURE TO FILTERED XENON-ARC RADIATION
BS EN 15836-1:2010 Plastics. Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools Homogenous membranes of nominal thickness equal to or greater than 0,75 mm
ISO/PAS 11154:2006 Road vehicles — Roof load carriers
11/30236286 DC : 0 BS EN ISO 11963 - PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS
06/30146756 DC : DRAFT FEB 2006
I.S. EN ISO 21809-1:2011 PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 1: POLYOLEFIN COATINGS (3-LAYER PE AND 3-LAYER PP)
UNI EN 10245-5 : 2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE
13/30256722 DC : 0 BS ISO 11617 - BUILDINGS AND CIVIL ENGINEERING WORKS - SEALANTS - DETERMINATION OF CHANGES IN ADHESION, COHESION AND APPEARANCE OF ELASTIC WEATHERPROOFING SEALANTS AFTER EXPOSURE OF STATICALLY CURED SPECIMENS TO ARTIFICIAL WEATHERING AND MECHANICAL CYCLING
03/105231 DC : DRAFT MAR 2003 ISO 10966 - SPORTS AND RECREATIONAL EQUIPMENT - FABRICS FOR AWNINGS AND CAMPING TENTS - SPECIFICATION
14/30267384 DC : 0 BS EN 60079-30-1 ED 1.0 - EXPLOSIVE ATMOSPHERES - PART 30-1: ELECTRICAL RESISTANCE TRACE HEATING - GENERAL; TYPE TESTING AND DESIGN REQUIREMENTS
CAN/CSA-C22.2 NO. 60950-22:17 Information technology equipment - Safety - Part 22: Equipment to be installed outdoors (Binational standard with UL 60950-22)
08/30180841 DC : DRAFT JUNE 2008 BS EN 10245-3 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 3: PE COATED WIRE
DIN EN 124-5 E : 2015 GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 5: GULLY TOPS AND MANHOLE TOPS MADE OF COMPOSITE MATERIALS
02/206403 DC : DRAFT MAY 2002 IEC 62231. ED.1.0 - COMPOSITE STATION POST INSULATORS FOR SUBSTATIONS WITH A.C. VOLTAGES GREATER THAN 1000 V UPTO 245 KV - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA
04/30125747 DC : DRAFT NOV 2004 IEC 60439-5 ED.2 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS
PREN 14125 : DRAFT 2011 THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS
12/30266170 DC : 0 BS EN 15534-1 - COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1 : TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS
13/30294291 DC : 0 BS EN 62561-8 - LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 8: REQUIREMENTS FOR COMPONENTS FOR ISOLATED LPS
BS ISO 15398:2012 Specifications for thermoplastics covers and frames for manholes and inspection chambers used in non-traffic areas
BS EN 13245-3:2010 Plastics. Unplasticized poly(vinyl chloride) (PVCU) profiles for building applications Designation of PVC-UE profiles
BS EN 50620:2017 Electric cables. Charging cables for electric vehicles (BT(DE/NOT)259)
BS EN 60335-2-109:2010 Household and similar electrical appliances. Safety Particular requirements for UV radiation water treatment appliances
08/30189619 DC : 0 BS EN 10223-7 - STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 7: STEEL WIRE WELDED PANELS FOR FENCING
14/30253068 DC : 0 BS EN ISO 4892-1 - PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE
BS ISO 29664 : 2010 PLASTICS - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION
BS ISO 15372:2000 Ships and marine technology. Inflatable rescue boats. Coated fabrics for inflatable chambers
PD IEC/PAS 80005-3:2014 Utility connections in port Low Voltage Shore Connection (LVSC) Systems. General requirements
DIN EN ISO 16474-2:2014-03 Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 16474-2:2013)
UNE-EN 10310:2011 Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings
BS ISO 4665:2016 Rubber, vulcanized or thermoplastic. Resistance to weathering
15/30331165 DC : 0 BS EN 60068-2-5 - ENVIRONMENTAL TESTING - PART 2-5: TESTS - TEST SA: SIMULATED SOLAR RADIATION AT GROUND LEVEL AND GUIDANCE FOR SOLAR RADIATION TESTING
UNI CEN/TS 16359 : 2012 PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF KNOT STAINING RESISTANCE OF WOOD COATINGS
BS ISO 9022-9:2016 Optics and photonics. Environmental test methods Solar radiation and weathering
ISO 10966:2011 Sports and recreational equipment Fabrics for awnings Specification
BS EN 15649-7:2009 Floating leisure articles for use on and in the water Additional specific safety requirements and test methods for Class E devices
BS EN 13329 : 2016 LAMINATE FLOOR COVERINGS - ELEMENTS WITH A SURFACE LAYER BASED ON AMINOPLASTIC THERMOSETTING RESINS - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS
BS EN 62561-6:2011 Lightning protection system components (LPSC) Requirements for lightning strike counters (LSC)
DIN EN 16240:2014-03 LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
08/30180844 DC : DRAFT JUNE 2008 BS EN 10245-4 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 4: POLYESTER COATED WIRE
DIN EN 14836:2006-03 SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - EXPOSURE TO ARTIFICIAL WEATHERING
PD CEN/TS 16359:2012 Paints and varnishes. Coating materials and coating systems for exterior wood. Assessment of knot staining resistance of wood coatings
DIN EN 16281:2013-04 CHILD PROTECTIVE PRODUCTS - CONSUMER FITTED CHILD RESISTANT LOCKING DEVICES FOR WINDOWS AND BALCONY DOORS - SAFETY REQUIREMENTS AND TEST METHODS
13/30289253 DC : 0 BS EN 13329 - LAMINATE FLOOR COVERINGS - ELEMENTS WITH A SURFACE LAYER BASED ON AMINOPLASTIC THERMOSETTING RESINS - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS
CEI EN 61969-3 : 2012 MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - OUTDOOR ENCLOSURES - PART 3: ENVIRONMENTAL REQUIREMENTS, TESTS AND SAFETY ASPECTS
DIN EN 15534-4 E : 2014 COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 4: SPECIFICATIONS FOR DECKING PROFILES AND TILES
16/30333706 DC : 0 BS ISO 2135 - ANODIZING OF ALUMINIUM AND ITS ALLOYS - ACCELERATED TEST OF LIGHT FASTNESS OF COLOURED ANODIC OXIDATION COATINGS USING ARTIFICIAL LIGHT
BS EN ISO 16474-2:2013 Paints and varnishes. Methods of exposure to laboratory light sources Xenon-arc lamps
BS EN 60099-9:2014 Surge arresters Metal-oxide surge arresters without gaps for HVDC converter stations
07/30172345 DC : 0 BS EN 15724 - THERMOPLASTICS STATIC TANKS FOR ABOVE GROUND STORAGE OF DOMESTIC HEATING OILS, KEROSENE AND DIESEL FUELS - SECONDARY CONTAINMENTS USED WITH TANKS COMPLYING WITH EN 13341 - REQUIREMENTS AND TEST METHODS
03/119348 DC : 0 PREN 1013-1 - LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETING FOR INTERNAL AND EXTERNAL ROOFING, WALL CLADDING AND CEILING FINISHES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
16/30325971 DC : 0 BS ISO/IEC 11801-1 - INFORMATION TECHNOLOGY - GENERIC CABLING FOR CUSTOMER PREMISES - PART 1: GENERAL REQUIREMENTS
12/30258453 DC : 0 BS EN 62368-1 AMD - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
UNE-EN 14389-1:2015 Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics
12/30235298 DC : DRAFT JAN 2012 BS EN 50526-2 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 2: VOLTAGE LIMITING DEVICES
ONORM EN ISO 11963 : 2013 PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS (ISO 11963:2012)
UNE-EN 60079-30-1:2017 Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements
14/30290405 DC : 0 BS EN 1384 - HELMETS FOR EQUESTRIAN ACTIVITIES
BS ISO 17398:2004 Safety colours and safety signs. Classification, performance and durability of safety signs
14/30310464 DC : 0 BS EN 61643-31 - LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 31: REQUIREMENTS AND TEST METHODS FOR SPDS FOR PHOTOVOLTAIC INSTALLATIONS
PREN 4057-305 : 200P1 AEROSPACE SERIES - CABLE TIES FOR HARNESSES - TEST METHODS - PART 305: COLOUR FASTNESS
BS EN 15534-1 : 2014 COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS
BS EN 50604-1:2016 Secondary lithium batteries for light EV (electric vehicle) applications General safety requirements and test methods
BS EN 60950-22:2017 Information technology equipment. Safety Equipment to be installed outdoors
IEC PAS 80005-3:2014 Utility connections in port - Part 3: Low Voltage Shore Connection (LVSC) Systems - General requirements
IEC 62893-2:2017 Charging cables for electric vehicles for rated voltages up to and including 0,6/1 kV - Part 2: Test methods
DIN EN 10223-8:2014-04 STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 8: WELDED MESH GABION PRODUCTS
PREN 15651-2 : DRAFT 2012 SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 2: SEALANTS FOR GLAZING
BS ISO 3865:2005 Rubber, vulcanized or thermoplastic. Methods of test for staining in contact with organic material
PREN 13207 : DRAFT 2016 PLASTICS - THERMOPLASTIC SILAGE FILMS AND TUBES FOR USE IN AGRICULTURE
DIN EN 124-5:2015-09 GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 5: GULLY TOPS AND MANHOLE TOPS MADE OF COMPOSITE MATERIALS
DIN ISO 10966 E : 2012 SPORTS AND RECREATIONAL EQUIPMENT - FABRICS FOR AWNINGS - SPECIFICATION (ISO 10966:2011)
DIN ISO 3917 E : 2017 ROAD VEHICLES - SAFETY GLAZING MATERIALS - TEST METHODS FOR RESISTANCE TO RADIATION, HIGH TEMPERATURE, HUMIDITY, FIRE AND SIMULATED WEATHERING (ISO 3917:2016)
C22.2 NO. 18.1-13 (R2018) Metallic outlet boxes (Tri-national standard, with UL 514A and ANCE NMX- J-023/1)
BS EN ISO 29664:2017 Plastics. Artificial weathering including acidic deposition
ISO 15928-3:2015 Houses Description of performance Part 3: Structural durability
CSA C22.2 No. 61730-1 : 2011 : INC : UPD 1 : 2013 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
BS EN ISO 21809-1:2011 Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Polyolefin coatings (3-layer PE and 3-layer PP)
ISO 9022-9:2016 Optics and photonics Environmental test methods Part 9: Solar radiation and weathering
EN 62561-3:2017 Lightning Protection System Components (LPSC) - Part 3: Requirements for isolating spark gaps (ISG)
UNE-EN ISO 21809-1:2011 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2011)
CSA C22.2 No. 42-1 : 2013 : INC : UPD 1 : 2016 COVER PLATES FOR FLUSH-MOUNTED WIRING DEVICES
CSA C22.2 No. 42-1 : 2013 COVER PLATES FOR FLUSH-MOUNTED WIRING DEVICES
I.S. EN 62217:2013 POLYMERIC HV INSULATORS FOR INDOOR AND OUTDOOR USE - GENERAL DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA (IEC 62217:2012 (EQV))
I.S. EN 60099-8:2011 SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV
I.S. EN 60950-22:2017 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 22: EQUIPMENT TO BE INSTALLED OUTDOORS
I.S. EN 62368-1:2014 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED)
DIN EN ISO 29664:2016-09 (Draft) PLASTICS - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION (ISO 29664:2010)
I.S. EN 438-2:2016 HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
ISO/TR 19032:2006 Plastics Use of polyethylene reference specimens (PERS) for monitoring laboratory and outdoor weathering conditions
BS IEC 62275:2006 Cable management systems. Cable ties for electrical installations
I.S. EN 50526-1:2012 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 1: SURGE ARRESTERS
I.S. EN ISO 15110:2017 PAINTS AND VARNISHES - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION (ISO 15110:2017)
CSA C22.2 No. 18-4 : 2004 : R2009 : FR HARDWARE FOR THE SUPPORT OF CONDUIT, TUBING, AND CABLE
ISO 2135:2017 Anodizing of aluminium and its alloys — Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light
ISO 15686-2:2012 Buildings and constructed assets — Service life planning — Part 2: Service life prediction procedures
I.S. EN 13329:2016 LAMINATE FLOOR COVERINGS - ELEMENTS WITH A SURFACE LAYER BASED ON AMINOPLASTIC THERMOSETTING RESINS - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS
I.S. EN 1013:2012 LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
ISO 10640:2011 Plastics Methodology for assessing polymer photoageing by FTIR and UV/visible spectroscopy
I.S. EN 14932:2018 PLASTICS - THERMOPLASTIC STRETCH FILMS FOR WRAPPING SILAGE BALES
BS EN 17098-1:2018 Plastics. Barrier films for agricultural and horticultural soil disinfection by fumigation Specifications for barrier films
EN 62368-1:2014/AC:2017-03 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED)
I.S. EN 62561-6:2011 LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 6: REQUIREMENTS FOR LIGHTNING STRIKE COUNTERS (LSC) (IEC 62561-6:2011, MODIFIED)
EN ISO 25649-7:2017 Floating leisure articles for use on and in the water - Part 7: Additional specific safety requirements and test methods for class E devices (ISO 25649-7:2017)
EN 3-8:2006/AC:2007 PORTABLE FIRE EXTINGUISHERS - PART 8: ADDITIONAL REQUIREMENTS TO EN 3-7 FOR THE CONSTRUCTION, RESISTANCE TO PRESSURE AND MECHANICAL TESTS FOR EXTINGUISHERS WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR
UNE-EN 62790:2015 Junction boxes for photovoltaic modules - Safety requirements and tests
UNI EN 13071-1 : 2008 STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 1: GENERAL REQUIREMENTS
ASTM D 5592 : 1994 : R2010 Standard Guide for Material Properties Needed in Engineering Design Using Plastics
I.S. EN 3-8:2006 PORTABLE FIRE EXTINGUISHERS - PART 8: ADDITIONAL REQUIREMENTS TO EN 3-7 FOR THE CONSTRUCTION, RESISTANCE TO PRESSURE AND MECHANICAL TESTS FOR EXTINGUISHERS WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR
IEC 62848-1:2016 Railway applications - DC surge arresters and voltage limiting devices - Part 1: Metal-oxide surge arresters without gaps
DIN EN 438-2:2016-06 HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
IEC TR 61916:2017 Electrical accessories - Harmonization of general rules
EN 13329:2016+A1:2017 Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods
EN ISO 15110:2017 Paints and varnishes - Artificial weathering including acidic deposition (ISO 15110:2017)
ISO 7628:2010 Road vehicles Thermoplastics tubing for air braking systems
EN 513:1999 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the resistance to artificial weathering
ISO 7165:2017 Fire fighting — Portable fire extinguishers — Performance and construction
ISO 16938-2:2008 Building construction Determination of the staining of porous substrates by sealants used in joints Part 2: Test without compression
ISO 21809-4:2009 Petroleum and natural gas industries External coatings for buried or submerged pipelines used in pipeline transportation systems Part 4: Polyethylene coatings (2-layer PE)
I.S. EN 62208:2011 EMPTY ENCLOSURES FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS (IEC 62208:2011)
ISO 28278-2:2010 Glass in building — Glass products for structural sealant glazing — Part 2: Assembly rules
I.S. CEN TR 581-4:2006 OUTDOOR FURNITURE - SEATING AND TABLES FOR CAMPING, DOMESTIC AND CONTRACT USE - PART 4: REQUIREMENTS AND TEST METHODS FOR DURABILITY UNDER THE INFLUENCE OF CLIMATIC CONDITIONS
IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV Information technology equipment - Safety - Part 1: General requirements
S.R. CEN TS 15534-3:2007 WOOD-PLASTICS COMPOSITES (WPC) - PART 3: CHARACTERISATION OF WPC PRODUCTS
UNI EN ISO 11403-3 : 2014 PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 3: ENVIRONMENTAL INFLUENCES ON PROPERTIES
UNE-EN ISO 21809-1:2019 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2018)
I.S. EN 13206:2017 PLASTICS - THERMOPLASTIC COVERING FILMS FOR USE IN AGRICULTURE AND HORTICULTURE
DIN EN 966:2013-11 HELMETS FOR AIRBORNE SPORTS
DIN EN ISO 4892-1:2016-10 PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 4892-1:2016)
DIN EN 607:2005-02 Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing
DIN EN ISO 7823-3:2007-08 Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 3: Continuous cast sheets (ISO 7823-3:2007)
DIN EN 840-5:2013-02 MOBILE WASTE AND RECYCLING CONTAINERS - PART 5: PERFORMANCE REQUIREMENTS AND TEST METHODS
DIN EN ISO 7823-2:2003-12 PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 2: EXTRUDED SHEETS
DIN EN 10223-3:2014-04 STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 3: HEXAGONAL STEEL WIRE MESH PRODUCTS FOR CIVIL ENGINEERING PURPOSES
DIN EN 10223-7:2013-02 STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 7: STEEL WIRE WELDED PANELS FOR FENCING
DIN EN 397:2013-04 Industrial safety helmets (includes Amendment A1:2012)
DIN EN 10245-4:2012-01 Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire; German version EN 10245-4:2011
IEC 62109-1:2010 Safety of power converters for use in photovoltaic power systems - Part 1: General requirements
ISO 4892-1:2016 Plastics Methods of exposure to laboratory light sources Part 1: General guidance
BS EN ISO 12017:1996 Plastics. Poly(methyl methacrylate) double- and triple-skin sheets. Test methods
UNE-EN 10223-8:2014 Steel wire and wire products for fencing and netting - Part 8: Welded mesh gabion products
04/30123347 DC : DRAFT OCT 2004 IEC 61439-1 - LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES
BS EN 607:2004 Eaves gutters and fittings made of PVC-U. Definitions, requirements and testing
BS EN ISO 10724-2:2001 Plastics. Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) Small plates
IEC 60794-3-70:2016 Optical fibre cables - Part 3-70: Outdoor cables - Family specification for outdoor optical fibre cables for rapid/multiple deployment
IEC 60079-0:2017 RLV Explosive atmospheres - Part 0: Equipment - General requirements
ISO 11403-3:2014 Plastics Acquisition and presentation of comparable multipoint data Part 3: Environmental influences on properties
IEC 61439-1:2011 Low-voltage switchgear and controlgear assemblies - Part 1: General rules
EN 62852:2015 Connectors for DC-application in photovoltaic systems - Safety requirements and tests
BS EN ISO 294-3:2003 Plastics. Injection moulding of test specimens of thermoplastic materials Small plates
BS EN 263:2008 Sanitary appliances. Crosslinked cast acrylic sheets for baths and shower trays for domestic purposes
UNE-EN 14187-8:2017 Cold applied joint sealants - Test methods - Part 8: Determination of the artificial weathering by UV-irradiation
EN 62752:2016 In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD)
EN 840-5:2012 Mobile waste and recycling containers - Part 5: Performance requirements and test methods
UNE-EN 840-5:2013 Mobile waste and recycling containers - Part 5: Performance requirements and test methods
BS EN ISO 11431:2002 Building construction. Jointing products. Determination of adhesion/cohesion properties of sealants after exposure to heat, water and artificial light through glass
BS EN 131-2 : 2010 LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING
BS EN 10223-7:2012 Steel wire and wire products for fencing and netting Steel wire welded panels for fencing
UNE-EN ISO 11997-2:2014 Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light (ISO 11997-2:2013)
BS EN 14389-2:2015 Road traffic noise reducing devices. Procedures for assessing long term performance Non-acoustical characteristics
UNE-EN 10245-3:2012 Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire
BS EN ISO 4892-1:2016 Plastics. Methods of exposure to laboratory light sources General guidance
UNE-EN 60079-0:2013 Explosive atmospheres - Part 0: Equipment - General requirements
BS EN 671-2:2001 Fixed fire fighting systems. Hose systems Hose systems with lay-flat hose
UNE-EN 50526-2:2014 Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 2: Voltage limiting devices
DIN EN 13245-1 E : 2010 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 1: DESIGNATION OF PVC-U PROFILES
BS EN 15434 : 2006 GLASS IN BUILDING - PRODUCT STANDARD FOR STRUCTURAL AND/OR ULTRA-VIOLET RESISTANT SEALANT (FOR USE WITH STRUCTURAL SEALANT GLAZING AND/OR INSULATING GLASS UNITS WITH EXPOSED SEALS)
BS EN 62109-1:2010 Safety of power converters for use in photovoltaic power systems General requirements
DIN EN 15334 E : 2007 SANITARY APPLIANCES - METHACRYLIC DISPERSIONS OF HIGH FILLER CONTENT
BS EN 13575:2012 Static thermoplastic tanks for the above ground storage of chemicals. Blow moulded or rotationally moulded polyethylene tanks. Requirements and test methods
UNE-EN 10223-7:2013 Steel wire and wire products for fencing and netting - Part 7: Steel wire welded panels for fencing
UNE-EN 14389-2:2015 Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics
ISO 105-B10:2011 Textiles — Tests for colour fastness — Part B10: Artificial weathering — Exposure to filtered xenon-arc radiation
DIN EN 15200 E : 2007 SANITARY APPLIANCES - MULTIFUNCTION SHOWER CABINETS
IEC 60099-9:2014 Surge arresters - Part 9: Metal-oxide surge arresters without gaps for HVDC converter stations
BS EN 12200-1:2016 Plastics rainwater piping systems for above ground external use. Unplasticized poly(vinyl chloride) (PVC-U) Specifications for pipes, fittings and the system
UNE-EN 1384:2013 Helmets for equestrian activities
DIN EN 13245-1:2010-11 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 1: Designation of PVC-U profiles
UL 514D:2ED 2013-06 Cover Plates for Flush-Mounted Wiring Devices
UNE-EN 10245-4:2012 Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire
I.S. EN 840-5:2012 MOBILE WASTE AND RECYCLING CONTAINERS - PART 5: PERFORMANCE REQUIREMENTS AND TEST METHODS
09/30204029 DC : 0 BS EN 61439-1 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES
BS EN ISO 7823-2:2003 Plastics. Poly(methyl methacrylate) sheets. Types, dimensions and characteristics Extruded sheets
BS EN 15200:2007 Sanitary appliances. Multifunction shower cabinets
ISO 11997-2:2013 Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 2: Wet (salt fog)/dry/humidity/UV light
ISO 10724-2:1998 Plastics — Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) — Part 2: Small plates
UNE-EN 10245-2:2012 Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire
IEC 60099-4:2014 Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems
UNE-EN 14125:2013 Thermoplastic and flexible metal pipework for underground installation at petrol filling stations
BS EN ISO 7491:2000 Dental materials. Determination of colour stability
IEC 61914 : 2.0:2015 CABLE CLEATS FOR ELECTRICAL INSTALLATIONS
UNE-EN 1385:2012 Helmets for canoeing and white water sports
IEC 60950-22:2016 Information technology equipment - Safety - Part 22: Equipment to be installed outdoors
DIN EN 15434:2010-07 Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals) (includes Amendment A1:2010)
ISO 7823-1:2003 Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 1: Cast sheets
ISO 5674:2004 Tractors and machinery for agriculture and forestry Guards for power take-off (PTO) drive-shafts Strength and wear tests and acceptance criteria
ISO 294-3:2002 Plastics Injection moulding of test specimens of thermoplastic materials Part 3: Small plates
BS EN 13245-1:2010 Plastics. Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications Designation of PVC-U profiles
BS EN ISO 7823-1:2003 Plastics. Poly(methyl methacrylate) sheets. Types, dimensions and characteristics Cast sheets
BS EN 14125:2013 Thermoplastic and flexible metal pipework for underground installation at petrol filling stations
BS EN 14396:2004 Fixed ladders for manholes
ISO 12017:1995 Plastics Poly(methyl methacrylate) double- and triple-skin sheets Test methods
BS EN 10245-4:2011 Steel wire and wire products. Organic coatings on steel wire Polyester coated wire
BS EN 62852:2015 Connectors for DC-application in photovoltaic systems. Safety requirements and tests
BS EN 60950-1 : 2006 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
BS EN 10245-1:2011 Steel wire and wire products. Organic coatings on steel wire General rules
UNI EN 840-5 : 2013 MOBILE WASTE AND RECYCLING CONTAINERS - PART 5: PERFORMANCE REQUIREMENTS AND TEST METHODS
ISO 9142:2003 Adhesives Guide to the selection of standard laboratory ageing conditions for testing bonded joints
BS EN 671-1:2012 Fixed firefighting systems. Hose systems Hose reels with semi-rigid hose
ISO 19712-3:2007 Plastics Decorative solid surfacing materials Part 3: Determination of properties Solid surface shapes
IEC 62275:2013 Cable management systems - Cable ties for electrical installations
UNE-EN 1013:2013 Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings - Requirements and test methods
14/30303914 DC : 0 BS EN 50604-1 - SECONDARY LITHIUM BATTERIES FOR LEV (LIGHT ELECTRIC VEHICLE) APPLICATIONS - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS
ISO 19712-2:2007 Plastics Decorative solid surfacing materials Part 2: Determination of properties Sheet goods
BS EN 50521 : 2009 CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS
IEC 61439-1:2020 Low-voltage switchgear and controlgear assemblies - Part 1: General rules
UNE-EN 1873:2015 Prefabricated accessories for roofing - Individual rooflights of plastics - Product specification and test methods
08/30179116 DC : DRAFT MAR 2008 BS EN 50521 - CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS
IEC 60335-2-65:2002+AMD1:2008+AMD2:2015 CSV Household and similar electrical appliances - Safety - Part 2-65:Particular requirements for air-cleaning appliances
UNE-EN 10245-1:2012 Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules
UNE-EN 13329:2016 Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods
UNE-EN 13206:2017 Plastics - Thermoplastic covering films for use in agriculture and horticulture
UNE-EN ISO 11403-3:2014 Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO 11403-3:2014)
ISO 16474-2:2013 Paints and varnishes — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps
16/30301661 DC : 0 BS EN 61439-1 ED3.0 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES
16/30242287 DC : 0 BS EN 62688 - CONCENTRATOR PHOTOVOLTAIC (CPV) MODULE AND ASSEMBLY SAFETY QUALIFICATION
BS EN 13341 : 2005 STATIC THERMOPLASTIC TANKS FOR ABOVE GROUND STORAGE OF DOMESTIC HEATING OILS, KEROSENE AND DIESEL FUELS - BLOW MOULDED AND ROTATIONALLY MOULDED POLYETHYLENE TANKS AND ROTATIONALLY MOULDED TANKS MADE OF ANIONICALLY POLYMERIZED POLYAMIDE 6 - REQUIREMENTS AND TEST METHODS
UNE-EN 14323:2017 Wood-based panels - Melamine faced boards for interior uses - Test methods
IEC 62208:2011 Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements
UNE-EN 12492:2012 Mountaineering equipment - Helmets for mountaineers - Safety requirements and test methods
DIN EN 15334:2007-05 Sanitary appliances - Methacrylic dispersions of high filler content
UNE-EN ISO 4892-1:2017 Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:2016)
DIN EN 10245-1:2012-01 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES
CLC/TS 50467 : 2008 COR 2008 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
EN 62109-1 : 2010 SAFETY OF POWER CONVERTERS FOR USE IN PHOTOVOLTAIC POWER SYSTEMS - PART 1: GENERAL REQUIREMENTS
EN 15334:2007 Sanitary appliances - Methacrylic dispersions of high filler content
EN ISO 4892-1:2016 Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:2016)
EN 15651-2:2017 Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 2: Sealants for glazing
EN 15200:2007/AC:2009 SANITARY APPLIANCES - MULTIFUNCTION SHOWER CABINETS
EN 14628:2005 Ductile iron pipes, fittings and accessories - External polyethylene coating for pipes - Requirements and test methods
EN 4057-305:2005 Aerospace series - Cable ties for harnesses - Test methods - Part 305: Colour fastness
EN 1384:2017 Helmets for equestrian activities
EN 15132:2006 Container shells for mobile waste containers with a capacity up to 1 700 l - Performance requirements and test methods
EN 16153:2013+A1:2015 Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods
EN 14963:2006 Roof coverings - Continuous rooflights of plastics with or without upstands - Classification, requirements and test methods
EN ISO 19712-2:2013 Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007)
EN 15434:2006+A1:2010 Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals)
EN 14389-2:2015 Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics
EN ISO 21809-1:2011 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2011)
EN ISO 11997-2:2013 Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light (ISO 11997-2:2013)
EN 16434:2014 Internal blinds - Protection from strangulation hazards - Requirements and test methods for safety devices
EN 397:2012+A1:2012 Industrial safety helmets
EN ISO 16474-2:2013 Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 16474-2:2013)
EN ISO 10724-2 : 2000 PLASTICS - INJECTION MOULDING OF TEST SPECIMENS OF THERMOSETTING POWDER MOULDING COMPOUNDS (PMCS) - PART 2: SMALL PLATES
EN 14187-8:2017 Cold applied joint sealants - Test methods - Part 8: Determination of the artificial weathering by UV-irradiation
EN 1866-2:2014 Mobile fire extinguishers - Part 2: Requirements for the construction, pressure resistance and mechanical tests for extinguishers, with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 1866-1
EN ISO 30013:2011 Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties (ISO 30013:2011)
EN 15649-7:2009 Floating leisure articles for use on and in the water - Part 7: Additional specific safety requirements and test methods for class E devices
EN 1873:2014+A1:2016 Prefabricated accessories for roofing - Individual rooflights of plastics - Product specification and test methods
EN 1359:2017 Gas meters - Diaphragm gas meters
EN ISO 19712-3:2013 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2007)
EN ISO 9142:2003 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:2003)
EN 14125:2013 Thermoplastic and flexible metal pipework for underground installation at petrol filling stations
EN ISO 7823-1:2003 Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 1: Cast sheets (ISO 7823-1:2003)
EN 14389-1:2015 Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics
EN 15187:2006 FURNITURE - ASSESSMENT OF THE EFFECT OF LIGHT EXPOSURE
EN 15836-2:2010 Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm
EN ISO 7491:2000 Dental materials - Determination of colour stability (ISO 7491:2000)
EN ISO 11431 : 2002 Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants after exposure to heat, water and artificial light through glass (ISO 11431:2002)
EN 16281:2013 Child protective products - Consumer fitted child resistant locking devices for windows and balcony doors - Safety requirements and test methods
EN 15752-1 : 2014 GLASS IN BUILDING - ADHESIVE BACKED POLYMERIC FILM - PART 1: DEFINITIONS AND REQUIREMENTS
EN 1866:2005 Mobile fire extinguishers
EN 966:2012+A1:2012 Helmets for airborne sports
EN 4708-001:2014 Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 001: Technical specification
EN 10245-4:2011 Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire
EN 671-2:2012 Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose
EN 263:2008 Sanitary appliances - Crosslinked cast acrylic sheets for baths and shower trays for domestic purposes
EN ISO 7823-2 : 2003 PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 2: EXTRUDED SHEETS
EN ISO 8936:2017 Awnings for leisure accommodation vehicles - Requirements and test methods (ISO 8936:2017)
EN 1385:2012 Helmets for canoeing and white water sports
EN 15836-1:2010 Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm
EN 812:2012 Industrial bump caps
EN 671-1:2012 Fixed firefighting systems - Hose systems - Part 1: Hose reels with semi-rigid hose
EN ISO 105-B10:2011 Textiles - Tests for colour fastness - Part B10: Artificial weathering - Exposure to filtered xenon-arc radiation (ISO 105-B10:2011)
EN 14396:2004 Fixed ladders for manholes
ONORM EN ISO 12402-7 : 2015 PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS (ISO 12402-7:2006 + AMD 1:2011)
BS EN 14963:2006 Roof coverings. Continuous rooflights of plastics with or without upstands. Classification, requirements and test methods
UNE-EN 50526-1:2012 Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 1: Surge arresters
16/30344964 DC : 0 BS EN 4708-001 - AEROSPACE SERIES - SLEEVING, HEAT-SHRINKABLE, FOR BINDING, INSULATION AND IDENTIFICATION - PART 001: TECHNICAL SPECIFICATION
DIN EN 15534-5 E : 2014 COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 5: SPECIFICATIONS FOR CLADDING PROFILES AND TILES
13/30238193 DC : DRAFT DEC 2013 BS ISO 16616 - TEST METHODS FOR NATURAL FIBER-REINFORCED PLASTIC COMPOSITE (NFC) DECK BOARDS
DIN EN 1013:2015-03 LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
11/30245512 DC : 0 BS ISO 15398 - SPECIFICATIONS FOR THERMOPLASTICS COVERS AND FRAMES FOR MANHOLES AND INSPECTION CHAMBERS USED IN NON-TRAFFIC AREAS
UNI EN 14836 : 2006 SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - EXPOSURE TO ARTIFICIAL WEATHERING
17/30348286 DC : 0 BS EN 17098-1 - PLASTICS - BARRIER FILMS FOR AGRICULTURAL AND HORTICULTURAL SOIL DISINFECTION BY FUMIGATION - PART 1: SPECIFICATIONS FOR BARRIER FILMS
DD CEN/TS 15480-1:2007 Identification card systems. European Citizen Card Physical, electrical and transport protocol characteristics
I.S. EN 1866:2006 MOBILE FIRE EXTINGUISHERS
BS ISO 21809-4:2009 Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Polyethylene coatings (2-layer PE)
ISO 4141-1:2005 Road vehicles Multi-core connecting cables Part 1: Test methods and requirements for basic performance sheathed cables
DD ISO/PAS 11154:2006 Road vehicles. Roof load carriers
12/30254135 DC : 0 BS EN 15651-2 - SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 2: SEALANTS FOR GLAZING
ISO 9553:1997 Solar energy — Methods of testing preformed rubber seals and sealing compounds used in collectors
UNE-EN 10245-5:2012 Steel wire and wire products - Organic coatings on steel wire - Part 5: Polyamide coated wire
UNE-EN 60794-1-22:2015 Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods
ISO 16616:2015 Test methods for natural fibre-reinforced plastic composite (NFC) deck boards
UNE-EN 62217:2013 Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria
DIN EN ISO 105-B10 E : 2012 TEXTILES - TESTS FOR COLOUR FASTNESS - PART B10: ARTIFICIAL WEATHERING - EXPOSURE TO FILTERED XENON-ARC RADIATION (ISO 105-B10:2011)
BS EN ISO 105-B10:2011 Textiles. Tests for colour fastness Artificial weathering. Exposure to filtered xenon-arc radiation
17/30335124 DC : 0 BS EN 13207 - PLASTICS - THERMOPLASTIC SILAGE FILMS AND TUBES FOR USE IN AGRICULTURE
CEI EN 62752 : 1ED 2017 IN-CABLE CONTROL AND PROTECTION DEVICE FOR MODE 2 CHARGING OF ELECTRIC ROAD VEHICLES (IC-CPD)
11/30243837 DC : 0 BS EN 62217 - POLYMERIC HV INSULATORS FOR INDOOR AND OUTDOOR USE - GENERAL DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA
09/30208429 DC : 0 BS EN 50467 - RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
DIN EN 14836 E : 2006 SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - EXPOSURE TO ARTIFICIAL WEATHERING
CEI EN 60794-1-22 : 2013 OPTICAL FIBRE CABLES - PART 1-22: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - ENVIRONMENTAL TEST METHODS
DIN EN 50298 : 1999 EMPTY ENCLOSURES FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS
14/30243471 DC : 0 BS ISO 15082 - ROAD VEHICLES - TESTS FOR RIGID PLASTIC SAFETY GLAZING MATERIALS
BS ISO 14486:2012 Laminate floor coverings. Specification
BS 2782-5:Method 540D:1995 Methods of testing plastics. Optical and colour properties, weathering Methods of exposure to laboratory light sources. General guidance
BS EN ISO 15110:2017 Paints and varnishes. Artificial weathering including acidic deposition
BS EN 62561-3:2017 Lightning protection system components (LPSC) Requirements for isolating spark gaps (ISG)
BS ISO 7628:2010 Road vehicles. Thermoplastics tubing for air braking systems
BS EN ISO 25649-7:2017 Floating leisure articles for use on and in the water Additional specific safety requirements and test methods for Class E devices
I.S. EN 62790:2015 JUNCTION BOXES FOR PHOTOVOLTAIC MODULES - SAFETY REQUIREMENTS AND TESTS
11/30253944 DC : 0 BS EN 62275 - CABLE MANAGEMENT SYSTEMS - CABLE TIES FOR ELECTRICAL INSTALLATIONS
PREN 14836 : DRAFT 2017 SURFACES FOR SPORTS AREAS - SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - TEST METHOD FOR THE DETERMINATION OF THE RESISTANCE TO EXPOSURE TO ULTRA VIOLET LIGHT ARTIFICIAL WEATHERING
BS EN 15836-2:2010 Plastics. Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools Reinforced membranes of nominal thickness equal to or greater than 1,5 mm
08/30154948 DC : DRAFT FEB 2008 BS ISO 21809-4 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 4: POLYETHYLENE COATINGS (2-LAYER PE)
08/30172148 DC : DRAFT MAY 2008 BS ISO 28278-1 - GLASS IN BUILDING - GLASS PRODUCTS FOR STRUCTURAL SEALANT GLAZING - PART 1: SUPPORTED AND UNSUPPORTED MONOLITHIC AND MULTIPLE GLAZING
14/30294067 DC : 0 BS EN 15534-6 - COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 6: SPECIFICATIONS FOR FENCING PROFILES AND SYSTEMS
CSA C22.2 No. 61730-1 : 2011 : INC : AMD 2 : 2015 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
EN 60794-3-70:2016 Optical fibre cables - Part 3-70: Outdoor cables - Family specification for outdoor optical fibre cables for rapid/multiple deployment
13/30271610 DC : 0 BS ISO 17296-3 - ADDITIVE MANUFACTURING - RAPID TECHNOLOGIES (RAPID PROTOTYPING) - PART 3: TEST METHODS
DIN EN 15534-4:2014-04 COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 4: SPECIFICATIONS FOR DECKING PROFILES AND TILES
BS EN 124-6:2015 Gully tops and manhole tops for vehicular and pedestrian areas Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U)
07/30169818 DC : 0 BS EN 1013 - LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
BS EN 50467:2011 Railway applications. Rolling stock. Electrical connectors, requirements and test methods
UNI EN ISO 19712-2 : 2013 PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 2: DETERMINATION OF PROPERTIES - SHEET GOODS
13/30286138 DC : 0 BS EN 16654 - CHILD PROTECTIVE PRODUCTS - CONSUMER FITTED FINGER PROTECTION DEVICES FOR DOORS - SAFETY REQUIREMENTS AND TEST METHODS
OVE/ONORM EN 61969-3 : 2012 MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - OUTDOOR ENCLOSURES - PART 3: ENVIRONMENTAL REQUIREMENTS, TESTS AND SAFETY ASPECTS (IEC 61969-3:2011)
03/110340 DC : 0 BS EN 131-2 - LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING
UNE-EN 16281:2013 Child protective products - Consumer fitted child resistant locking devices for windows and balcony doors - Safety requirements and test methods
10/30196240 DC : 0 BS ISO 10640 - PLASTICS - METHOD OF ASSESSING ACCELERATED PHOTOAGEING BY FTIR AND UV/VISIBLE SPECTROMETRY
I.S. EN 1866-2:2014 MOBILE FIRE EXTINGUISHERS - PART 2: REQUIREMENTS FOR THE CONSTRUCTION, PRESSURE RESISTANCE AND MECHANICAL TESTS FOR EXTINGUISHERS, WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR, WHICH COMPLY WITH THE REQUIREMENTS OF EN 1866-1
UNE-EN 62561-4:2011 Lightning protection system components (LPSC) - Part 4: Requirements for conductor fasteners
I.S. EN 15534-6:2015 COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 6: SPECIFICATIONS FOR FENCING PROFILES AND ELEMENTS
UNE-EN 62561-3:2017 Lightning Protection System Components (LPSC) - Part 3: Requirements for isolating spark gaps (ISG)
I.S. EN 60079-30-1:2017 EXPLOSIVE ATMOSPHERES - PART 30-1: ELECTRICAL RESISTANCE TRACE HEATING - GENERAL AND TESTING REQUIREMENTS
06/30137509 DC : DRAFT MAR 2006 ISO 19712-2 - PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 2: DETERMINATION OF PROPERTIES - SHEET GOODS
96/709572 DC : DRAFT JUL 1996 PREN 10287 - STEEL TUBES AND FITTINGS FOR ON AND OFFSHORE PIPELINES - EXTERNAL FUSED POLYETHYLENE BASED COATINGS
08/30189974 DC : DRAFT DEC 2008 BS EN 13245-1 - PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 1: DESIGNATION OF PVC-U PROFILES
UNE-EN 50289-4-17:2016 Communication cables - Specifications for test methods - Part 4-17: Test methods for UV resistance evaluation of the sheath of electrical and optical fibre cable
PD CEN/TS 15480-1:2012 Identification card systems. European Citizen Card Physical, electrical and transport protocol characteristics
11/30233262 DC : 0 BS EN 1871 - ROAD MARKING MATERIALS - PAINT, THERMOPLASTIC AND COLD PLASTIC MATERIALS - SPECIFICATIONS
07/30127284 DC : 0 BS EN ISO 4892-1 - PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE
08/30171587 DC : DRAFT MAY 2008 BS ISO 7628 - ROAD VEHICLES - THERMOPLASTICS TUBING FOR AIR BRAKING SYSTEMS
DD CEN/TS 15534-3:2007 Wood-plastics composites (WPC) Characterisation of WPC products
BS EN 61643-11 : 2012 LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 11: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER SYSTEMS - REQUIREMENTS AND TEST METHODS
BS ISO 15082:2016 Road vehicles. Tests for rigid plastic safety glazing materials
08/30178592 DC : DRAFT FEB 2008 BS ISO 6804 - RUBBER AND PLASTICS INLET HOSES AND HOSE ASSEMBLIES FOR WASHING-MACHINES AND DISHWASHERS - SPECIFICATION
NF EN 50300 : 2004 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS FOR LOW-VOLTAGE SUBSTATION CABLE DISTRIBUTION BOARDS
PD IEC/TR 62039:2007 Selection guide for polymeric materials for outdoor use under HV stress
UNE-EN 62561-6:2012 Lightning protection system components (LPSC) - Part 6: Requirements for lightning strike counters (LSC)
15/30326965 DC : 0 BS EN 62561-6 ED. 2 - LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 6: REQUIREMENTS FOR LIGHTNING STRIKE COUNTERS (LSC)
UNE-EN 13245-3:2011 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 3: Designation of PVC-UE profiles
UNE-EN 15651-2:2017 Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 2: Sealants for glazing
I.S. EN IEC 60099-8:2018 SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV
EN ISO 7823-3:2007 Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 3: Continuous cast sheets (ISO 7823-3:2007)
UNI EN 1013 : 2015 LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
NF EN 60099-8 : 2011 SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV
CSA C22.2 No. 18.1 : 2013 : INC : UPD 2 : 2017 METALLIC OUTLET BOXES
I.S. EN 14836:2006 SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - EXPOSURE TO ARTIFICIAL WEATHERING
CSA C22.2 No. 18.3 : 2012 : INC : UPD 1 : 2014 CONDUIT, TUBING, AND CABLE FITTINGS
UNI CEN/TS 15480-1 : 2012 IDENTIFICATION CARD SYSTEMS - EUROPEAN CITIZEN CARD - PART 1: PHYSICAL, ELECTRICAL AND TRANSPORT PROTOCOL CHARACTERISTICS
DIN EN ISO 19712-3:2013-09 PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 3: DETERMINATION OF PROPERTIES - SOLID SURFACE SHAPES (ISO 19712-3:2007)
ISO 11798:1999 Information and documentation — Permanence and durability of writing, printing and copying on paper — Requirements and test methods
S.R. CEN/TS 16599:2014 PHOTOCATALYSIS - IRRADIATION CONDITIONS FOR TESTING PHOTOCATALYTIC PROPERTIES OF SEMICONDUCTING MATERIALS AND THE MEASUREMENT OF THESE CONDITIONS
BS EN 15534-6 : 2015 COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 6: SPECIFICATIONS FOR FENCING PROFILES AND ELEMENTS
IEC 62561-3:2017 Lightning protection system components (LPSC) - Part 3: Requirements for isolating spark gaps (ISG)
BS EN 60068-2-5:2011 Environmental testing Tests. Test Sa. Simulated solar radiation at ground level and guidance for solar radiation testing
PREN ISO 11963 : DRAFT 2011 PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS
I.S. EN 50521:2008 CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS
CAN/CSA-C22.2 NO. 60335-2-34:17 Household and similar electrical appliances — Safety — Part 2-34: Particular requirements for motor-compressors (Binational standard with UL 60335-2-34)
ISO 12856-1:2014 Plastics Plastic railway sleepers for railway applications (railroad ties) Part 1: Material characteristics
I.S. EN 10245-5:2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE
ISO 4586-2:2015 High-pressure decorative laminates (HPL, HPDL) Sheets based on thermosetting resins (Usually called Laminates) Part 2: Determination of properties
I.S. EN 60099-9:2014 SURGE ARRESTERS - PART 9: METAL-OXIDE SURGE ARRESTERS WITHOUT GAPS FOR HVDC CONVERTER STATIONS
I.S. EN 16153:2013 LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
CSA C22.2 NO. 42.1:13 (R2017) Cover plates for flush-mounted wiring devices (Bi-national standard, with UL 514D)
UNE-EN 50548:2012 Junction boxes for photovoltaic modules
CEI EN 60099-9 : 2015 SURGE ARRESTERS - PART 9: METAL-OXIDE SURGE ARRESTERS WITHOUT GAPS FOR HVDC CONVERTER STATIONS
I.S. EN 15649-7:2009 FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 7: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS E DEVICES
I.S. EN 50526-2:2014 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 2: VOLTAGE LIMITING DEVICES
CEI EN 50526-2 : 2014 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 2: VOLTAGE LIMITING DEVICES
CSA C22.2 No. 18-4 : 2004 : R2013 HARDWARE FOR THE SUPPORT OF CONDUIT, TUBING, AND CABLE
I.S. EN ISO 8936:2017 AWNINGS FOR LEISURE ACCOMMODATION VEHICLES - REQUIREMENTS AND TEST METHODS (ISO 8936:2017)
UNE-EN ISO 19712-3:2013 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2007)
I.S. EN 15752-1:2014 GLASS IN BUILDING - ADHESIVE BACKED POLYMERIC FILM - PART 1: DEFINITIONS AND REQUIREMENTS
I.S. EN 15534-1:2014 COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS
BS EN 60099-4:2014 Surge arresters Metal-oxide surge arresters without gaps for a.c. systems
I.S. EN 13071-1:2008 STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 1: GENERAL REQUIREMENTS
I.S. EN IEC 62688:2018 CONCENTRATOR PHOTOVOLTAIC (CPV) MODULES AND ASSEMBLIES - SAFETY QUALIFICATION
I.S. EN 60794-1-22:2012 OPTICAL FIBRE CABLES - PART 1-22: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - ENVIRONMENTAL TEST METHODS (IEC 60794-1-22:2012 (EQV))
BS EN 60079-0 : 2012 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
I.S. EN 4708-001:2014 AEROSPACE SERIES - SLEEVING, HEAT-SHRINKABLE, FOR BINDING, INSULATION AND IDENTIFICATION - PART 001: TECHNICAL SPECIFICATION
EN IEC 62561-6:2018/AC:2018-04 LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 6: REQUIREMENTS FOR LIGHTNING STRIKE COUNTERS (LSC) (IEC 62561-6:2018)
UNI EN 1866-2 : 2014 MOBILE FIRE EXTINGUISHERS - PART 2: REQUIREMENTS FOR THE CONSTRUCTION, PRESSURE RESISTANCE AND MECHANICAL TESTS FOR EXTINGUISHERS, WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR, WHICH COMPLY WITH THE REQUIREMENTS OF EN 1866-1
I.S. EN 62561-3:2017 LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 3: REQUIREMENTS FOR ISOLATING SPARK GAPS (ISG)
17/30359853 DC : 0 BS EN 17142 - MODULAR MULTILAYER FLOOR COVERINGS - ELEMENTS WITH A WOOD POWDER BASED SURFACE LAYER - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS
17/30361211 DC : 0 BS EN 513 - PLASTICS - POLY(VINYL CHLORIDE) (PVC) BASED PROFILES - DETERMINATION OF THE RESISTANCE TO ARTIFICIAL WEATHERING
ASTM D 4956 : 2017 : REDLINE SPECIFICATION FOR RETROREFLECTIVE SHEETING FOR TRAFFIC CONTROL
UNE-EN 1866-2:2015 Mobile fire extinguishers - Part 2: Requirements for the construction, pressure resistance and mechanical tests for extinguishers, with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 1866-1
CEI EN 60099-8 : 2012 SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV
PREN 50548 : DRAFT 2009 JUNCTION BOXES FOR PHOTOVOLTAIC MODULES
ASTM D 5071 : 2006 : R2013 Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus
UNE-EN 62752:2017 In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD)
IEC 60079-0:2017 Explosive atmospheres - Part 0: Equipment - General requirements
ISO 15110:2017 Paints and varnishes — Artificial weathering including acidic deposition
ISO 16938-1:2008 Building construction Determination of the staining of porous substrates by sealants used in joints Part 1: Test with compression
I.S. CEN TS 15354:2006 PLASTICS - EXTRUDED AND/OR CALENDERED, NON-REINFORCED FILM AND SHEETING MADE OF PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) - GUIDANCE FOR CHARACTERISATION AND DESIGNATION
ISO/TS 13434:2008 Geosynthetics Guidelines for the assessment of durability
S.R. CEN TS 15534-1:2007 WOOD-PLASTICS COMPOSITES (WPC) - PART 1: TEST METHODS FOR CHARACTERISATION OF WPC MATERIALS AND PRODUCTS
ISO 21809-1:2011 Petroleum and natural gas industries External coatings for buried or submerged pipelines used in pipeline transportation systems Part 1: Polyolefin coatings (3-layer PE and 3-layer PP)
ASTM G 155 : 2013 : REDLINE Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
ASTM D 5592 : 1994 : R2002 : EDT 1 Standard Guide for Material Properties Needed in Engineering Design Using Plastics
IEC/ISO/IEEE 80005-1:2012 Utility connections in port - Part 1: High Voltage Shore Connection (HVSC) Systems - General requirements
S.R. CEN/TS 15480-1:2012 IDENTIFICATION CARD SYSTEMS - EUROPEAN CITIZEN CARD - PART 1: PHYSICAL, ELECTRICAL AND TRANSPORT PROTOCOL CHARACTERISTICS
IEC 60079-0 REDLINE : 7.0 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
IEC 61643-11:2011 Low-voltage surge protective devices - Part 11: Surge protective devices connected to low-voltage power systems - Requirements and test methods
IEC 60092-306:2009 Electrical installations in ships - Part 306: Equipment - Luminaires and lighting accessories
IEC 62847:2016 Railway applications - Rolling stock - Electrical connectors - Requirements and test methods
DIN EN ISO 12402-7:2015-08 (Draft) PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS
DIN EN 13575:2012-06 Static thermoplastic tanks for the above ground storage of chemicals - Blow moulded or rotationally moulded polyethylene tanks - Requirements and test methods
DIN EN 12200-1:2016-10 PLASTICS RAINWATER PIPING SYSTEMS FOR ABOVE GROUND EXTERNAL USE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
DIN EN ISO 7823-1:2003-12 PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: CAST SHEETS
DIN EN 14125:2013-09 THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS
ISO 30013:2011 Rubber and plastics hoses Methods of exposure to laboratory light sources Determination of changes in colour, appearance and other physical properties
UNE-EN 13245-1:2011 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 1: Designation of PVC-U profiles
BS EN 13199-3:2000 Packaging. Small load carrier systems Bond Stackable System (BSS)
UNE-EN 61439-1:2012 Low-voltage switchgear and controlgear assemblies - Part 1: General rules
BS EN 13200-4:2006 Spectator facilities Seats. Product characteristics
07/30091745 DC : 0 BS IEC 62368 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - SAFETY - REQUIREMENTS
ISO 29664:2010 Plastics Artificial weathering including acidic deposition
BS EN 10223-3:2013 Steel wire and wire products for fencing and netting Hexagonal steel wire mesh products for civil engineering purposes
BS EN ISO 11963:2012 Plastics. Polycarbonate sheets. Types, dimensions and characteristics
BS EN 10245-2:2011 Steel wire and wire products. Organic coatings on steel wire PVC finished wire
BS EN 1359:2017 Gas meters. Diaphragm gas meters
BS EN 15334:2007 Sanitary appliances. Methacrylic dispersions of high filler content
IEC 62852:2014 Connectors for DC-application in photovoltaic systems - Safety requirements and tests
BS EN 812:2012 Industrial bump caps
BS EN 13071:2002 Selective waste collection containers. Above-ground mechanically-lifted containers with capacity from 80 l to 5000 l for selective collection of waste
UNE-EN 12574-2:2017 Stationary waste containers - Part 2: Performance requirements and test methods
BS EN 61439-1:2011 Low-voltage switchgear and controlgear assemblies General rules
BS EN 15187:2006 Furniture. Assessment of the effect of light exposure
BS EN 15132:2006 Container shells for mobile waste containers with a capacity up to 1700 l. Performance requirements and test methods
IEC 60335-2-109:2010+AMD1:2013+AMD2:2016 CSV Household and similar electrical appliances - Safety - Part 2-109: Particular requirements for UV radiation water treatment appliances
EN 50548 : 2011 AMD 2 2014 JUNCTION BOXES FOR PHOTOVOLTAIC MODULES
EN 13484:2012 Helmets for users of luges
EN 60079-0:2012/A11:2013 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED)
EN 12200-1:2016 Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
EN 13071-1:2008/AC:2010 STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 1: GENERAL REQUIREMENTS
EN 12492:2012 Mountaineering equipment - Helmets for mountaineers - Safety requirements and test methods
CEN/TS 16599:2014 Photocatalysis - Irradiation conditions for testing photocatalytic properties of semiconducting materials and the measurement of these conditions
IEC 60794-1-22:2017 RLV Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods
EN 50521:2008/A1:2012 CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS
EN 13199-3:2000 Packaging - Small Load Carrier Systems - Part 3: Bond Stackable System (BSS)
EN 61914:2016 Cable cleats for electrical installations
CEN/TS 15534-3:2007 Wood-plastics composites (WPC) - Part 3: Characterisation of WPC products
CEN/TS 15480-1:2012 Identification card systems - European Citizen Card - Part 1: Physical, electrical and transport protocol characteristics
DIN EN 671-2:2012-07 Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose
DIN EN 671-1:2012-07 Fixed firefighting systems - Hose systems - Part 1: Hose reels with semi-rigid hose
EN 60439-5:2006 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS
DIN EN 10245-2:2012-01 Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire; German version EN 10245-2:2011
DIN EN 15187:2006-12 Furniture - Assessment of the effect of light exposure
EN 12068:1998 Cold-rolled flat products made of high yield strength micro-alloyed steels for cold forming - General delivery conditions
DIN ISO 5912:2004-05 CAMPING TENTS
EN 60099-9:2014 Surge arresters - Part 9: Metal-oxide surge arresters without gaps for HVDC converter stations
EN 62561-6:2011 Lightning protection system components (LPSC) - Part 6: Requirements for lightning strike counters (LSC)
EN 13200-4:2006 Spectator facilities - Part 4: Seats - Product characteristics
EN 131-2:2010+A2:2017 Ladders - Part 2: Requirements, testing, marking
EN 60335-2-109:2010 Household and similar electrical appliances - Safety - Part 2-109: Particular requirements for UV radiation water treatment appliances
EN 62217:2013 Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria
DIN EN 263:2008-06 Sanitary appliances - Crosslinked cast acrylic sheets for baths and shower trays for domestic purposes
EN 50467 : 2011 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
EN 50526-1:2012 Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 1: Surge arresters
DIN EN ISO 11403-3:2002-02 PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 3: ENVIRONMENTAL INFLUENCES ON PROPERTIES (ISO 11403-3:2014)
EN 14323:2017 Wood-based panels - Melamine faced boards for interior uses - Test methods
DIN EN 10245-3:2012-01 Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire; German version EN 10245-3:2011
DIN ISO 3917:2017-10 ROAD VEHICLES - SAFETY GLAZING MATERIALS - TEST METHODS FOR RESISTANCE TO RADIATION, HIGH TEMPERATURE, HUMIDITY, FIRE AND SIMULATED WEATHERING (ISO 3917:2016)
CEN/TS 16359 : 2012 PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF KNOT STAINING RESISTANCE OF WOOD COATINGS
EN 13245-1:2010 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 1: Designation of PVC-U profiles
IEC 60099-8:2017 RLV Surge arresters - Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV
CEN/TS 15354:2006 Plastics - Extruded and/or calendered, non-reinforced film and sheeting made of plasticized poly(vinyl chloride) (PVC-P) - Guidance for characterisation and designation
DIN EN ISO 4892-1:2001-09 PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 4892-1:2016)
IEC 60950-22:2016 RLV Information technology equipment - Safety - Part 22: Equipment to be installed outdoors
EN 50618:2014 Electric cables for photovoltaic systems
DIN EN 10288:2003-12 STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL TWO-LAYER EXTRUDED POLYETHYLENE BASED COATINGS
EN 50300:2004 Low-voltage switchgear and controlgear assemblies - General requirements for low-voltage substation cable distribution boards
DIN EN 14628:2006-01 DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL POLYETHYLENE COATING FOR PIPES - REQUIREMENTS AND TEST METHODS
UNE-EN 15434:2007 Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals)
UNE-EN 16153:2013 Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods
NBR IEC/TR 62039 : 2010 SELECTION GUIDE FOR POLYMERIC MATERIALS FOR OUTDOOR USE UNDER HIGH VOLTAGE STRESS
UNE-EN 15534-6:2016 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 6: Specifications for fencing profiles and elements

ISO 4892-1:2016 Plastics Methods of exposure to laboratory light sources Part 1: General guidance
ISO 11341:2004 Paints and varnishes Artificial weathering and exposure to artificial radiation Exposure to filtered xenon-arc radiation
ISO 4582:2017 Plastics — Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources
ASTM G 155 : 2013 : REDLINE Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
AS 3996:2019 Access covers and grates
ISO 9370:2017 Plastics — Instrumental determination of radiant exposure in weathering tests — General guidance and basic test method

View more information
£88.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.